DESCRIPTION
The WM8804 is a high performance consumer mode S/PDIF transceiver with support for 1 received channel and 1 transmitted channel.
A crystal derived, or externally provided high quality master clock is used to allow low jitter recovery of S/PDIF supplied master clocks.
Generation of all typically used audio clocks is possible using the high performance internal PLL. A dedicated CLKOUT pin provides a high drive clock output.
A pass through option is provided which allows the device simply to be used to clean up (de-jitter) the received digital audio signals.
The device may be used under software control or stand alone hardware control modes. In software control mode, both 2-wire with read back and 3-wire interface modes are supported.

FEATURES
• S/PDIF (IEC60958-3) compliant.
• Advanced jitter attenuating PLL with low intrinsic period
   jitter of 50 ps RMS.
• S/PDIF recovered clock using PLL, or stand alone crystal
   derived clock generation.
• Supports 10 – 27MHz crystal clock frequencies.
• 2-wire / 3-Wire serial or hardware control interface.
• Programmable audio data interface modes:
   - I2S, Left, Right Justified or DSP
   - 16/20/24 bit word lengths
• 1 channel receiver input and 1 channel transmit output.
• Auto frequency detection / synchronisation.
• Selectable output status data bits.
• Up to 3 configurable GPO pins.
• De-emphasis flag output.
• Non-audio detection including DOLBYTM and DTSTM.
• Channel status changed flag.
• Configurable clock distribution with selectable output
   MCLK rate of 512fs, 256fs, 128fs and 64fs.
• 2.7 to 3.6V digital and PLL supply voltages.
• 20-lead SSOP package.

APPLICATIONS
• AV processors and Hi-Fi systems
• Music industry applications
• DVD-P/DVD-RW
• Digital TV