DESCRIPTION:
The IDT723626/723636/723646 is a monolithic, high-speed, low-power, CMOS Triple Bus synchronous (clocked) FIFO memory which supports clock frequencies up to 83 MHz and has read access times as fast as 8 ns. Two independent 256/512/1,024 x 36 dual-port SRAM FIFOs on board each chip buffer data between a bidirectional 36-bit bus (Port A) and two unidirectional 18-bit buses (Port B transmits data, Port C receives data.) FIFO data can be read out of Port B and written into Port C using either 18-bit or 9-bit formats with a choice of Big- or Little-Endian configurations.

FEATURES:
• Memory storage capacity:
   IDT723626 – 256 x 36 x 2
   IDT723636 – 512 x 36 x 2
   IDT723646 – 1,024 x 36 x 2
• Clock frequencies up to 83 MHz (8ns access time)
• Two independent FIFOs buffer data between one bidirectional 36-bit port and two unidirectional 18-bit ports (Port C receives and Port B transmits)
• 18-bit (word) and 9-bit (byte) bus sizing of 18 bits (word) on Ports B and C
• Select IDT Standard timing (using EFA, EFB, FFA, and FFC flag functions) or First Word Fall Through Timing (using ORA, ORB, IRA, and IRC flag functions)
• Programmable Almost-Empty and Almost-Full flags; each has three default offsets (8, 16 and 64)
• Serial or parallel programming of partial flags
• Big- or Little-Endian format for word and byte bus sizes
• Master Reset clears data and configures FIFO, Partial Reset clears data but retains configuration settings
• Mailbox bypass registers for each FIFO
• Free-running CLKA, CLKB and CLKC may be asynchronous or coincident (simultaneous reading and writing of data on a single clock edge is permitted)
• Auto power down minimizes power dissipation
• Available in a space-saving 128-pin Thin Quad Flatpack (TQFP)
• Industrial temperature range (–40°C to +85°C) is available