| データシートサーチシステム |
|
-8G-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() Master Electronics | 6718-GR005 | Alpha Wire | Hook Up Wire - Stranded - 12 (65/30) AWG - 600V - mPPE - Green - 100 ft - Tinned Copper RoHS : Compliant |
| 1 | |
| APH-0728-G-R | Samtec Inc | LOW PROFILE ADAPTOR RoHS : Compliant |
| 0 | ||
| APH-1918-G-R | Samtec Inc | LOW PROFILE ADAPTOR RoHS : Compliant |
| 0 | ||
| DBAS-78GR-37-0-PY-090-D614 | TE Connectivity | DBAS 78GR 37-0 PY 090 D614 RoHS : Compliant |
| 0 | ||
| DBAS-78GR-7-0-PY-090-Q5624 | TE Connectivity | DBAS 78GR 7-0 PY 090 Q5624 MOQ Reduction RoHS : Compliant |
| 0 | ||
| IDSD-05-D-23.58-G-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| PXR-8-GREY | Neutrik USA Inc | Connector Accessories Color Coding Ring Gray Box RoHS : Compliant |
| 0 | ||
| IDSD-20-D-07.88-G-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CTPA08/GR/100M | Thomas & Betts | Extra Flexible Conduit - Lightweight Weight - NC08/NW7.5 - Out Dia 10.0mm - In Dia 6.5mm - Polyamide 6 - Gray - 100 m - Medium High UV Protection - IP40 RoHS : Compliant |
| 0 | ||
| APH-0338-G-R | Samtec Inc | LOW PROFILE ADAPTOR RoHS : Compliant |
| 0 | ||
| APH-0208-G-R | Samtec Inc | LOW PROFILE ADAPTOR RoHS : Compliant |
| 0 | ||
| IDSD-20-D-07.98-G-RW | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSD-30-D-07.48-G-RW | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DBAS78GR370PN090A5624 | TE Connectivity | DBAS 78GR 37-0 PN 090 A5624 RoHS : Compliant |
| 0 | ||
| F2211/8-GREEN-100 | Alpha Wire | FIT2211/8 GREEN 25X4 FT RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | KHXL-18G-RSC-12 | Omega Engineering | SUPER OMEGACLAD, XL THERMOCOUPLE PROBES WITH UTILITY HANDLES - Bulk (Alt: 30AC7970) RoHS : Compliant |
| 0 | |
| KHXL-18G-RSC-12 | Omega Engineering | SUPER OMEGACLAD, XL THERMOCOUPLE PROBES WITH UTILITY HANDLES - Bulk (Alt: KHXL-18G-RSC-12) RoHS : Compliant |
| 0 | ||
| EHSS-18G-RSC-24 | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: EHSS-18G-RSC-24) RoHS : Not Compliant |
| 0 | ||
| BZT52B6V8-G RHG | Taiwan Semiconductor | Diode Zener Single 6.8V 2% 410mW 2-Pin SOD-123 T/R - Tape and Reel (Alt: BZT52B6V8-G RHG) RoHS : Compliant |
| 0 | ||
| CA KE 20 18 GROM | ITT Interconnect Solutions | - Bulk (Alt: CA KE 20 18 GROM) RoHS : Not Compliant |
| 0 | ||
| SF38G R0 | Taiwan Semiconductor | Diode Super Fast Recovery Rectifier 600V 3A 2-Pin DO-201AD Paper T/R - Tape and Reel (Alt: SF38G R0) RoHS : Compliant | 0 | |||
| DBAS 78GR 37-0 PN 090 A5624 | TE Connectivity | DBAS 78GR 37-0 PN 090 A5624 - Bag (Alt: ZPF000000000206882) RoHS : Not Compliant |
| 0 | ||
BCW68GR![]() | Nexperia | - Tape and Reel (Alt: BCW68GR) RoHS : Compliant |
| 0 | ||
| NCLH2728GR006TRF | NIC Components Corp | LOW RESISTANCE METAL ALLOY CURRENT SENSING RESISTO - Tape and Reel (Alt: NCLH2728GR006TRF) RoHS : Not Compliant |
| 0 | ||
| EV6508GR-00A | Monolithic Power Systems | MP6508GR 1.2A 18V Stepper Motor Driver Bipolar Evaluation Board (Alt: EV6508GR-00A) RoHS : Compliant | 0 | |||
| FRITS4108GR10SL-3PB0F7 | Glenair Inc | POWER PRODUCTS - BLQ - 26482 CONNECTORS - Bulk (Alt: FRITS4108GR10SL-3PB0F7) RoHS : Not Compliant |
| 0 | ||
| IS31LT3178-GRLS4-TR | Lumissil Microsystems | Adjustable linear current devices with excellent temperature stability and can drive LED strings cl - Tape and Reel (Alt: IS31LT3178-GRLS4-TR) RoHS : Not Compliant |
| 0 | ||
| ITS4108GR32-17PB0F7 | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITS4108GR32-17PB0F7) RoHS : Not Compliant |
| 0 | ||
| MC908GR60ACFAE | NXP Semiconductors | 8 Bit MCU, HC08 Family HC08GR Series Microcontrollers, HC08, 8 MHz, 60 KB, 48 Pins, LQFP - Trays (Alt: MC908GR60ACFAE) RoHS : Compliant |
| 0 | ||
| MP6528GR-P | Monolithic Power Systems | - Tape and Reel (Alt: MP6528GR-P) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | L128-GRN2003500000 | Lumileds | Single Color LEDs 2835 GREEN 520-540nm RoHS : Compliant |
| 24,245 | |
| MPQ4328GRE-AEC1-Z | Monolithic Power Systems | Switching Voltage Regulators 36V, 4A, Low Quiescent Current, Synchronous Step-Down Converter, RoHS : Compliant |
| 6,475 | ||
| MPQ4328GRE-5-AEC1-Z | Monolithic Power Systems | Switching Voltage Regulators 36V, 4A, Low Quiescent Current, Synchronous Step-Down Converter, AEC-Q100 Qualified RoHS : Compliant |
| 5,000 | ||
| MPQ4228GRE-Q-AEC1-P | Monolithic Power Systems | Switching Voltage Regulators 3A, 36V, Step-Down Converter with Single Channel USB Charging Port Supporting QC3.0 and Type-C 5V@3A DFP Mode for Automotive, AEC-Q100 Qualified RoHS : Compliant |
| 2,859 | ||
| TB0012-508-08GR | Same Sky | Fixed Terminal Blocks Terminal block, screw type, 5.08, 19.20mm height, horizontal, 8 poles, Green, slotted screw, PCB mount RoHS : Compliant |
| 2,097 | ||
| TB0014-500-08GR | Same Sky | Fixed Terminal Blocks Terminal Block, Screw Type, Horizontal Wire Entry, Green, 8 pole, 5.0mm pitch, Slotted Screw RoHS : Compliant |
| 1,970 | ||
| TB0014-508-08GR | Same Sky | Fixed Terminal Blocks Terminal Block, Screw Type, Horizontal Wire Entry, Green, 8 pole, 5.08mm pitch, Slotted Screw RoHS : Compliant |
| 1,948 | ||
| TB0013-500-P08GR | Same Sky | Fixed Terminal Blocks Terminal Block, Screw Type, Horizontal Wire Entry, Green, 8 pole, 5.0mm pitch, Phillips Screw RoHS : Compliant |
| 1,500 | ||
| TB0011-350-08GR | Same Sky | Fixed Terminal Blocks 8 Poles, Screw Type, Horizontal, 3.50 Pitch, 24-18 (AWG), Green, Terminal Block Connector RoHS : Compliant |
| 1,371 | ||
| MPQ4328GRE-AEC1-P | Monolithic Power Systems | Switching Voltage Regulators 36V, 4A, Low Quiescent Current, Synchronous Step-Down Converter, RoHS : Compliant |
| 980 | ||
| TB0015-500-08GR | Same Sky | Fixed Terminal Blocks 8 Poles, Screwless, 45, 5.0 mm Pitch, 30-16 (AWG), Green, Terminal Block Connector RoHS : Compliant |
| 960 | ||
| TB0015-500-2-08GR | Same Sky | Fixed Terminal Blocks 8 Poles, Screwless, 45, 5.0 mm Pitch, 30-16 (AWG), Green, Double Deck, Terminal Block Connector RoHS : Compliant |
| 400 | ||
| TBL002B-350-18GR-2OR | Same Sky | Fixed Terminal Blocks 18 Poles, Screwless, 45, 3.50 mm Pitch, 24-18 (AWG) RoHS : Compliant |
| 271 | ||
| TB0015-500-3-08GR | Same Sky | Fixed Terminal Blocks 8 Poles, Screwless, 45, 5.0 mm Pitch, 30-16 (AWG), Green, Tripple Deck, Terminal Block Connector RoHS : Compliant |
| 216 | ||
| PPC2-CW19-ADL-i7/8G-R10 | iEi Integration Corporation | HMI Displays & Panel PCs 18.5" 400 cd/m(2nd) 1920x1080 Panel PC with 12th Intel Core i7-12700 Processor (25M Cache, up to 4.90 GHz),TDP 65W,8GB DDR4,HDMI Output,1*PCIe Gen4 x 16 Slot,1*M.2 2280,ATX/AT power supply,PCAP touchscreen with AG,R10 RoHS : Compliant |
| 2 | ||
![]() Newark | 2SC4738-GR,LXHF(T | Toshiba America Electronic Components | Transistor, Npn, 50V, 0.15A, Sot-416; |Toshiba 2SC4738-GR, LXHF(T RoHS : Compliant |
| 3,000 | |
| 2SC4738-GR,LXHF(T | Toshiba America Electronic Components | Transistor, Npn, 50V, 0.15A, Sot-416; |Toshiba 2SC4738-GR, LXHF(T RoHS : Compliant |
| 3,000 | ||
| MPQ4228GRE-C-AEC1-P | Monolithic Power Systems | Dc/Dc Conv, Buck, 2.2Mhz, 150Deg C; |Monolithic Power Systems (Mps) MPQ4228GRE-C-AEC1-P RoHS : Compliant |
| 481 | ||
| MPQ4228GRE-C-AEC1-P | Monolithic Power Systems | Dc/Dc Conv, Buck, 2.2Mhz, 150Deg C; |Monolithic Power Systems (Mps) MPQ4228GRE-C-AEC1-P RoHS : Compliant |
| 481 | ||
| OCC58GRS02A-1 | L-com Inc | Outdoor Ceiling Mount Microwave Occupanc; |L-Com OCC58GRS02A-1 RoHS : Compliant |
| 49 | ||
| OCC58GRS16-1 | L-com Inc | Recessed Mount Microwave Occupancy Senso; |L-Com OCC58GRS16-1 RoHS : Compliant |
| 48 | ||
| MP - FCR7358GR | SPC Multicomp | Banana Connector, Jack, 32A, 1Kv, Red; |Multicomp Pro MP - FCR7358GR RoHS : Compliant |
| 32 | ||
| TRD695SRA8GRY-5 | L-com Inc | Ethernet Cbl, Cat6; |L-Com TRD695SRA8GRY-5 RoHS : Compliant |
| 14 | ||
| OCC58GRS16-2 | L-com Inc | Recessed Mount Microwave Occupancy Senso; |L-Com OCC58GRS16-2 RoHS : Compliant |
| 10 | ||
| OCC58GRS02S-2 | L-com Inc | Compact Microwave Occupancy Sensor Inser; |L-Com OCC58GRS02S-2 RoHS : Compliant |
| 10 | ||
| TRD815SRA8GRY-7 | L-com Inc | Enet Cbl, Cat5E, 90° Rj45 Pl-90° Rj45 Pl; |L-Com TRD815SRA8GRY-7 RoHS : Compliant |
| 7 | ||
| OCC58GRS02S-3 | L-com Inc | Compact Microwave Occupancy Sensor Inser; |L-Com OCC58GRS02S-3 RoHS : Compliant |
| 6 | ||
| KHXL-18G-RSC-12 | Omega Engineering | Sensor Probe, 3.2Mm, 300Mm; |Omega KHXL-18G-RSC-12 RoHS : Compliant |
| 4 | ||
| 2628 GR005 | Alpha Wire | Hook-Up Wire, 28Awg, Green, 30.5M; |Alpha Wire 2628 GR005 RoHS : Compliant |
| 1 | ||
| VABM-L1-10HW-G18-8-GR | Festo | Manifold Rail, 8 Outlet, G1/8, M7; |Festo VABM-L1-10HW-G18-8-GR RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | REF198GRUZ-REEL7![]() | Analog Devices Inc | MICRO POWER 5VOLT REF IC RoHS : Compliant |
| 7,216 | |
REF198GRUZ![]() | Analog Devices Inc | MICRO POWER 5VOLT REF IC RoHS : Compliant |
| 609 | ||
![]() RS | B2 1/8 GREEN 4FT (106-10078) | SUMITOMO ELECTRIC Interconnect Products | HEAT SHRINK TUBING, FLEX POLYOLEFIN, 1/8IN, 2:1, +135C, GRN, 4FT LENGTHS |
| 4,830 | |
| SJ5018 GRAY (7000051814) | 3M | BUMPER, SQUARE-TAPERED WITH FLAT TOP,0.23 INCH SQUARE, BUMPON, NATURAL RUBBER, GRAY |
| 4,544 | ||
| 41208 (KT 8 GREY) | icotek Corporation | GROMMETS, KT 8, GRAY, CLAMPING RANGE 8-9 MM, L 21MM X W 21MM X H 19MM, ELASTOMER |
| 863 | ||
| 2028GRA | 80/20 Inc | 2020 END CAP GRAY W/ PUSH-INS |
| 20 | ||
| 30138GREEN | Akro-Mils | BIN, SHELF BIN 17-7/8 X 6-5/8 X 4, GREEN |
| 12 | ||
| C6ASPAT8GR | StarTech | 8 FT GRAY CAT6A ETHERNET PATCH CABLE - SHIELDED (STP) |
| 10 | ||
| N6PATCH8GR | StarTech | 8 FT GRAY CAT6 ETHERNET PATCH CABLE WITH SNAGLESS RJ45 CONNECTORS |
| 9 | ||
| OCC58GRS02A-1 | L-com Inc | OUTDOOR CEILING MOUNT MICROWAVE OCCUPANCY SENSOR, IP65, 5.8 GHZ, 110 - 130 VAC, |
| 3 | ||
| M18GRYPQ (74039) | Banner Engineering Corp | PANEL MOUNT INDICATOR LED 18MM GREEN RED YEL PIGTAIL EZ-LIGHT M18 SERIES |
| 3 | ||
| F2211/8 GR103 | Alpha Wire | HEAT SHRINK TUBING, 1/8" ID, 2:1, GREEN XLPO, 4 PIECE(X25), FIT |
| 2 | ||
| 5858 GR005 (NULL) | Alpha Wire | HOOK-UP WIRE, COPPER, 16 AWG, 19X29, GREEN TFE INSULATED, -60 TO +200C |
| 2 | ||
| F083598 (GRS-H-60-60-A-0-0-0-0) | GEFRAN spa | SINGLE-PHASE SOLID STATE RELAY, UP TO 120A INTEGRATED HEATSINK |
| 2 | ||
| F083578 (GRS-H-75-60-D-0-0-0-0) | GEFRAN spa | SINGLE-PHASE SOLID STATE RELAY, UP TO 120A INTEGRATED HEATSINK |
| 2 | ||
| M18GRY2PQ (74051) | Banner Engineering Corp | PANEL MOUNT INDICATOR LED 18MM GREEN RED YEL PIGTAIL EZ-LIGHT M18 SERIES |
| 1 | ||
| F031078 (GRD-3500-6.0) | GEFRAN spa | RUPTURE DISK |
| 1 | ||
![]() Bisco Industries | PA-02003BV80.8 GRAY | MISCELLANEOUS | 1,000 | |||
| LW08GR8 | WASHERS | 900 | ||||
| VC-172-8 GREY | Caplugs | 200 | ||||
| 3050-8 GREY | MISCELLANEOUS | 100 | ||||
| KHXL-18G-RSC-18 | Omega Engineering | RoHS : Compliant | 1 | |||
![]() Rochester Electronics | MC68HC908GR4CFAE | NXP Semiconductors | IC MCU HC08 8Bit 1 Core FLASH 4kB (4k x 8) 8MHz 32-QFP Tray RoHS : Compliant |
| 50 | |
| MC908GR60ACFAE | NXP Semiconductors | IC MCU HC08 8Bit 1 Core FLASH 60kB (60k x 8) 8MHz 48-QFP Tray RoHS : Compliant |
| 490 | ||
BCW68GR![]() | Nexperia | Trans BJTs Single 45V 800mA SOT-23-3 T/R RoHS : Compliant |
| 102,360 | ||
MC908GR32AMFUE![]() | Freescale Semiconductor | IC MCU HC08 8Bit 1 Core FLASH 32kB (32k x 8) 8MHz 64-QFP Tray RoHS : Compliant |
| 185 | ||
| MC908GR4CPE | Freescale Semiconductor | IC MCU HC08 8Bit 1 Core FLASH 4kB (4k x 8) 8MHz 20-DIP Tube RoHS : Compliant |
| 1,578 | ||
MC908GR60ACFAE![]() | Freescale Semiconductor | IC MCU HC08 8Bit 1 Core FLASH 60kB (60k x 8) 8MHz 48-QFP Tray RoHS : Compliant |
| 1,497 | ||
| KMC908GR4CDW | Motorola Mobility LLC | IC MCU HC08 8Bit 1 Core FLASH 4kB (4k x 8) 8MHz 28-SOIC RoHS : Not Compliant |
| 10 | ||
| MC68HC908GR4CFA | Motorola Mobility LLC | Microcontroller, 8-Bit, FLASH, 68HC08 CPU, 8.2MHz, HCMOS, PQFP32 RoHS : Not Compliant |
| 83 | ||
| MC68HC908GR4CP | Motorola Mobility LLC | Microcontroller, 8-Bit, FLASH, 68HC08 CPU, 8.2MHz, HCMOS, PDIP28 RoHS : Not Compliant |
| 17,982 | ||
| MC68HC908GR8ACFA | Motorola Mobility LLC | Microcontroller, 8-Bit, FLASH, 68HC08 CPU, 8.2MHz, HCMOS, PQFP32 RoHS : Not Compliant |
| 1,406 | ||
| MC68HC908GR8AVFA | Motorola Mobility LLC | Microcontroller, 8-Bit, FLASH, 68HC08 CPU, 8.2MHz, HCMOS, PDIP28 RoHS : Not Compliant |
| 7,250 | ||
| MC68HC908GR8CDW | Motorola Mobility LLC | Microcontroller, 8-Bit, FLASH, 68HC08 CPU, 8.2MHz, HCMOS, PDSO28 RoHS : Not Compliant |
| 900 | ||
| MC908GR8CBE | Motorola Mobility LLC | MC908GR - Microcontroller, 8-Bit, 8KB Flash 3.3V/5V 42-Pin SPDIP Rail RoHS : Not Compliant |
| 483 | ||
| UPA2718GR-E1-AT | NEC Electronics Group | Power Field-Effect Transistor, P-Channel MOSFET RoHS : Compliant |
| 5,000 | ||
| UPA2718GR-E1-AT | Renesas Electronics Corporation | Power Field-Effect Transistor, P-Channel MOSFET RoHS : Compliant |
| 2,500 | ||
![]() Sager | UTP6A38GR | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A, Green UTP Cab RoHS : Compliant | 0 | ||
| APH-0728-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| APH-1918-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| CTPA08/GR/100M | ABB Group | Conduit Fittings & Accessories | 0 | |||
| APH-0338-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| UTP28X48GR | Panduit Corp | Ethernet Cables / Networking Cables Cat 6A 28AWG UTP Patch Cord, CM/LSZH, Gr RoHS : Compliant |
| 0 | ||
| APH-0208-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| GWLX-S9-88-G/R-50 | Kycon Inc | Modular Connectors / Ethernet Connectors MDJCK8P8C SHLD TOPSD GRND TAB GRN/RED 50 RoHS : Unknown | 0 | |||
| PICS28/GR/100FT | ABB Group | Spiral Wraps, Sleeves, Tubing & Conduit | 0 | |||
| UTP6ASD18GR | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A (SD), Green UT RoHS : Compliant | 0 | |||
| STP6X18GR | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A, Green S/FTP C RoHS : Compliant |
| 0 | ||
| UTP28SP48GR | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Category 6 Performanc RoHS : Compliant |
| 0 | ||
| APH-0328-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 0 | ||
| APH-1538-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| APH-1208-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() TME | AC142R-03P-5.08-GRAY | Ninigi | Connector: PCB terminal block; terminal; power supply; 10A; 250V |
| 283 | |
| C118-GREEN | tasker | Wire: microphone cable; 2x0.14mm2; green; OFC; -15÷70°C; PVC |
| 158 | ||
| C128 GREEN | tasker | Wire: microphone cable; 2x0.35mm2; green; OFC; -15÷70°C; PVC |
| 139 | ||
| PXR-8-GREY | Neutrik USA Inc | Coding ring; grey; PX-Series |
| 80 | ||
| 9028-GR | electro-PJP | Wire; 1x0.75mm2; stranded; Cu; silicone; double; green; 1000V; 100m |
| 67 | ||
| GN 53.1-ND-18-GR | Elesa+Ganter | Magnet: permanent; neodymium; 10N; Ø: 18mm; H: 8mm; plastic; max.80°C |
| 11 | ||
| EP-DOP-SZ18-GR-A | TE Connectivity | Stopper; polyamide; light grey; Entrelec; Ø: 11mm; Size: 18 |
| 0 | ||
BCW68GR![]() | Nexperia | Transistor: PNP; bipolar; 45V; 0.8A; 250mW; SOT23,TO236AB RoHS : Compliant |
| 0 | ||
| OR18.GR.F-NW1Z.71CV | Baumer Electric Ag | Sensor: photoelectric; OR18 |
| 0 | ||
| EP-LN-PG48-GR-A | TE Connectivity | Nut; PG48; polyamide; 70mm; grey; Thread: PG; Entrelec |
| 0 | ||
| 2618 GR001 | Alpha Wire | Wire; ThermoThin; stranded; Cu; 18AWG; PFA; green; 600V; 305m |
| 0 | ||
| 6718 GR005 | Alpha Wire | Wire; EcoWire®; EcoGen®,HookUp Wire; stranded; Cu; 12AWG; MPPE |
| 0 | ||
| 1808 GR001 | Alpha Wire | Wire; HookUp Wire; 24AWG; wire; Cu; ETFE; green; 305m; 1000ft |
| 0 | ||
| TB004-508-08GR | Same Sky | Connector: PCB terminal block; power supply; 18A; 250V; PIN: 8 RoHS : Compliant |
| 0 | ||
| 2628 GR005 | Alpha Wire | Wire; ThermoThin; stranded; Cu; 28AWG; PFA; green; 600V; 30.5m |
| 0 | ||
![]() ComSIT USA | S908GR32AG3CFUER | Freescale Semiconductor | Electronic Component RoHS : Compliant | 23,911 | ||
| PBRC368GR50X000 | KYOCERA Corporation | Electronic Component RoHS : Compliant | 13,685 | |||
| MC68HC908GR8CDW | Motorola Semiconductor Products | 8-BIT MICROCONTROLLER UNIT Microcontroller, 8-Bit, FLASH, 68HC08 CPU, 8.2MHz, CMOS, PDSO28 RoHS : Not Compliant | 9,924 | |||
| HER108GR0 | TSC Electronics Ltd | GLASS PASSIVATED HIGH EFFICIENT RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 1A, 1000V V(RRM), Silicon, DO-41 RoHS : Compliant | 8,045 | |||
| S908GR32AG3VFAER | Freescale Semiconductor | Electronic Component RoHS : Compliant | 8,000 | |||
| LWQH8GR2OO3K6L3X4Y | OSRAM GmbH | LED White, Cool 1 LED Diffused 0402 T/R RoHS : Compliant | 8,000 | |||
| HER158GRO | Sanken Electric Co Ltd | Electronic Component RoHS : Compliant | 3,500 | |||
| SF28GR0 | TSC Electronics Ltd | GLASS PASSIVATED SUPER FAST RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 2A, 600V V(RRM), Silicon, DO-15 RoHS : Compliant | 2,500 | |||
| AKZ95010508GREEN | PTR Hartmann GmbH | Electronic Component RoHS : Not Compliant | 200 | |||
| AKZ9508508GREEN | PTR Hartmann GmbH | Electronic Component RoHS : Compliant | 200 | |||
| AKZ9505508GREEN | PTR Hartmann GmbH | Electronic Component RoHS : Compliant | 200 | |||
MC68HC908GR4CFAE![]() | Freescale Semiconductor | 8-BIT MICROCONTROLLER UNIT Microcontroller, 8-Bit, FLASH, 8.2MHz, CMOS, PQFP32 RoHS : Not Compliant | 129 | |||
MC68908GR16MFJE![]() | Freescale Semiconductor | 8-BIT MICROCONTROLLER Microcontroller, CMOS RoHS : Compliant | 100 | |||
| KMC908GR16MFA | Motorola Semiconductor Products | 8-BIT MICROCONTROLLER UNIT (MCU) Microcontroller, 8-Bit, FLASH, 8.2MHz, HCMOS, PQFP48 RoHS : Not Compliant | 80 | |||
| AKZ95012508GREEN | PTR Hartmann GmbH | Electronic Component RoHS : Compliant | 50 | |||
![]() Interstate Connecting Components | FRITS4108GR10SL-3PB0F7 | Glenair Inc | RoHS : Compliant | 0 | ||
| ITS4108GR32-17PB0F7 | Glenair Inc | RoHS : Compliant | 0 | |||
| ITS4108GR20-A48S | Glenair Inc | 0 | ||||
| FRITS4108GR18-4PB0F7 | Glenair Inc | RoHS : Compliant | 0 | |||
| FRITS4108GR20-19SB0F7 | Glenair Inc | RoHS : Compliant | 0 | |||
| FRITS4108GR28-6SB0F7 | Glenair Inc | RoHS : Compliant | 0 | |||
| FRITS4108GR32-17PB0F7 | Glenair Inc | RoHS : Compliant | 0 | |||
| FRITS4108GR32-76PB1F7 | Glenair Inc | RoHS : Compliant | 0 | |||
| ITS3108GR10SL-3SF7 | Glenair Inc | 0 | ||||
| ITS3108GR16-10S | Glenair Inc | 0 | ||||
| ITS4108GR16-12SF7 | Glenair Inc | RoHS : Compliant | 0 | |||
| ITS4108GR18-4PF7 | Glenair Inc | RoHS : Compliant | 0 | |||
| ITS4108GRMTB14S-7P | Glenair Inc | 0 | ||||
| FRITS4108GR20-19PB0F7 | Glenair Inc | RoHS : Compliant | 0 | |||
| FRITS4108GR28-6PB0F7 | Glenair Inc | RoHS : Compliant | 0 | |||
![]() PEI Genesis | F.66.08GR | Microsemi Storage OTN and Networking Solutions (now Microchip) |
| 0 | ||
![]() Powell Electronics | 15SH-A-08-GR-SMT-T/R | Adam Technologies Inc | CONNECTOR, BOARD HEADER, 1.50MM |
| 16,500 | |
| 2SHD-C-18-GR-T619 | Adam Technologies Inc | CONNECTOR, BOARD HEADER, 2.00MM |
| 6,600 | ||
| LHA-08-GRA | Adam Technologies Inc | CONNECTOR, LOCKING BOARD HEADER, 2.54MM RoHS : Compliant |
| 2,640 | ||
| BXX-8-GREY | Neutrik USA Inc | Colored Boot - XX-Series -Grey |
| 1,386 | ||
| 15SH-B1-08-GR-SMT-T/R | Adam Technologies Inc | CONNECTOR, BOARD HEADER, 1.50MM RoHS : Compliant |
| 660 | ||
| BSX-8-GREY | Neutrik USA Inc | Colored boot - X series -Grey |
| 594 | ||
| BPX-8-GREY | Neutrik USA Inc | Colored boot - PX series plug-Grey |
| 462 | ||
| PXR-8-GREY | Neutrik USA Inc | PX Series Color Code Ring Grey |
| 132 | ||
| FTD1808GRM | Altech Corporation | WIRECONNECTOR,2x18AWG/0.75sqmm |
| 84 | ||
| FID1808GRM | Altech Corporation | WIRE CONNECTOR,18AWG/0.75sqmm |
| 5 | ||
| FTD1818GR | Altech Corporation | WIRECONNECTOR,2x18AWG/0.75sqmm |
| 1 | ||
| FID1808GRRE | Altech Corporation | WIRE CONNECTOR,18AWG/0.75sqmm |
| 1 | ||
![]() Richardson RFPD | LCWC1008GR56GTAR | Kyocera AVX Components | RF CHIP INDUCTOR RoHS : Compliant | 0 | ||
REF198GRUZ-REEL7![]() | Analog Devices Inc | V-Ref Precision 4.096V 30mA 8-Pin TSSOP T/R RoHS : Compliant |
| 0 | ||
| LCWC1008GR15GTAR | Kyocera AVX Components | RF CHIP INDUCTOR RoHS : Compliant | 0 | |||
REF198GRUZ![]() | Analog Devices Inc | V-Ref Precision 4.096V 30mA 8-Pin TSSOP Tube RoHS : Compliant |
| 0 | ||
| LCWC1008GR39GTAR | Kyocera AVX Components | Wire Wound Chip Inductor RoHS : Compliant | 0 | |||
| LCWC1008GR10GTAR | Kyocera AVX Components | Wire Wound Chip Inductors RoHS : Compliant | 0 | |||
| LCWC1008GR47GTAR | Kyocera AVX Components | RF CHIP INDUCTOR RoHS : Compliant | 0 | |||
| LCWC1008GR82GTAR | Kyocera AVX Components | RF CHIP INDUCTOR RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | BVQ-529TH8GR-TD | Brightek Optoelectronic Co Ltd | INSTOCK | 12,000 | ||
| RTS5138-GR | Realtek Semiconductor | INSTOCK | 4,418 | |||
UPC2798GR-E1![]() | NEC Electronics Group | INSTOCK RoHS : Not Compliant | 2,139 | |||
| UPC2798GR-E1 | NECEL | INSTOCK | 711 | |||
| RTS5138-GR | INSTOCK | 173 | ||||
![]() Avnet Abacus | 249G 28GR | Boyd Corporation | (Alt: 035252) RoHS : Compliant | 0 | ||
| RLR05C69R8GRB14 | Vishay Intertechnologies | Through Hole Resistor 698 ohm RLR Series 125 mW 2 Axial Leaded 200 V Metal Film (Alt: RLR05C69R8GRB14) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | LW QH8G-R2OO-3K6L-3X4Y-5-S | ams OSRAM Group | OOSLW QH8G-R2OO-3K6L-3X4Y-5-S Q65112A736 (Alt: LW QH8G-R2OO-3K6L-3X4Y-5-S) RoHS : Compliant | 0 | ||
| 2SK208-GR(TE85L,F) | Toshiba America Electronic Components | Trans JFET N-CH 6.5mA 3-Pin S-Mini T/R (Alt: 2SK208-GR(TE85L,F)) RoHS : Compliant | 0 | |||
| KW DMLS33.SG-8M3-EBXDEBZB46-8E8G-R18-AL | ams OSRAM Group | (Alt: KW DMLS33.SG-8M3-EBXDEBZB46-8E8G-R18-AL) RoHS : Compliant | 0 | |||
| LRTBR98G-R5T-1-S7T7-35+PQ-25-2 | ams OSRAM Group | (Alt: LRTBR98G-R5T-1-S7T7-35+PQ-25-2) RoHS : Compliant | 0 | |||
| LRTBR98G-R5T-1+S7T7-35+PQ-25-20-R18-ZB | ams OSRAM Group | LED Tri-Color Blue/Green/Red 470nm/528nm/625nm Chip LED 6-Pin SMD T/R (Alt: LRTBR98G-R5T-1+S7T7-35+PQ-25-20-R18-ZB) RoHS : Compliant |
| 0 | ||
| LRTBR98G-R5T-1+S7T7-35+PQ-25 | ams OSRAM Group | LED Tri-Color Blue/Green/Red 470nm/528nm/625nm Chip LED 6-Pin SMD T/R (Alt: LRTBR98G-R5T-1+S7T7-35+PQ-25) RoHS : Compliant | 0 | |||
![]() Avnet Silica | TYN408GRG | STMicroelectronics | (Alt: TYN408GRG) RoHS : Compliant | 4,500 | ||
BCW68GR![]() | Nexperia | BCW68GSOT23TO236AB (Alt: BCW68GR) RoHS : Compliant | 0 | |||
| MP6528GR-P | Monolithic Power Systems | (Alt: MP6528GR-P) RoHS : Compliant | 0 | |||
| MP6508GR-Z | Monolithic Power Systems | (Alt: MP6508GR-Z) RoHS : Compliant | 0 | |||
| MC908GR60ACFAE | NXP Semiconductors | 8 Bit MCU HC08 Family HC08GR Series Microcontrollers HC08 8 MHz 60 KB 48 Pins LQFP (Alt: MC908GR60ACFAE) RoHS : Compliant | 0 | |||
| MP2638GR-0000-Z | Monolithic Power Systems | 3A BOOST AND 5A FAST CHARGING (Alt: MP2638GR-0000-Z) RoHS : Compliant | 0 | |||
| MC908GR32AMFUE | NXP Semiconductors | 8bit MCU HC08 8 MHz 32 KB 15 KB 64 Pins PQFP (Alt: MC908GR32AMFUE) RoHS : Compliant | 0 | |||
| MPQ4328GRE-AEC1-P | Monolithic Power Systems | DCDC Switching Regulator Adjustable Synchronous Buck Step Down 800 mV to 342 V 4A 22 MHz (Alt: MPQ4328GRE-AEC1-P) RoHS : Compliant | 0 | |||
| MPQ4228GRE-AEC1-P | Monolithic Power Systems | DCDC Switching StepDown Regulator Fixed 4236V in 22MHz 5V3A out QFN22 40 C to 150 C (Alt: MPQ4228GRE-AEC1-P) RoHS : Compliant | 0 | |||
| IS31LT3178-GRLS4-TR | Lumissil Microsystems | Adjustable linear current devices with excellent temperature stability and can drive LED strings cl (Alt: IS31LT3178-GRLS4-TR) RoHS : Compliant | 0 | |||
| MPQ4228GRE-C-AEC1-P | Monolithic Power Systems | Converter DC to DC Single Step Down 42V to 36V 22Pin QFN TR (Alt: MPQ4228GRE-C-AEC1-P) RoHS : Compliant | 0 | |||
| MPQ4228GRE-C-AEC1-Z | Monolithic Power Systems | (Alt: MPQ4228GRE-C-AEC1-Z) RoHS : Compliant | 0 | |||
| MPQ7928GRHE-005F-AEC1-Z | Monolithic Power Systems | MPSMPQ7928GRHE005FAEC1Z MPSMPQ7928GRH (Alt: MPQ7928GRHE-005F-AEC1-Z) RoHS : Compliant | 0 | |||
| 2J4924P-030LL195-C168GRST_CU013161 | 2J USA | 2J4924P Black Adhesive Mount LTE 30cm LL195 SMAMaleRAGold Red Shrink Tube (Alt: SI303101146) RoHS : Compliant | 0 | |||
| 2JF1224P-030MC137-C378GRST_CU013161 | 2J USA | 2JF1224P Black Adhesive Mount LTE 30cm MicroCoax 137mmSMBMaleRAGold Red Shrink Tube (Alt: SI321101924) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | CRG8GR00J | IN STOCK SHIP TODAY |
| 4,000 | ||
| 3448-GR | GBI | IN STOCK SHIP TODAY | 1,000 | |||
| AKZ950/7-5.08-GREEN | PTR Messtechnik GmbH & Co KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 628 | ||
| GSHS-1635F-3/8-GREEN | Dunbar | IN STOCK SHIP TODAY | 175 | |||
| PXR-8-GREY | Neutrik USA Inc | IN STOCK SHIP TODAY |
| 88 | ||
| PXR-8-GREEN | Neutrik USA Inc | IN STOCK SHIP TODAY |
| 87 | ||
| AKZ4301/3KD-5.08-GREEN | PTR Messtechnik GmbH & Co KG | IN STOCK SHIP TODAY |
| 60 | ||
| MSTBO2.5/ 8-GR-5.08 | Phoenix Contact | IN STOCK SHIP TODAY |
| 12 | ||
![]() DB Roberts | HHC1/4-20X5/8-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 26,940 | |
| FLW3/8-GR8-ZY-SAE | FLAT WASHER | Flat Washer GRADE 8 STEEL ZINC YELLOW SAE |
| 6,299 | ||
| HWH1/4-20X5/8-GR8-BLKPHOS | HEX WASHER HEAD SCR | Hex Washer Head Screw |
| 4,777 | ||
| HHC5/16-18X7/8-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 1,546 | ||
| FLW5/8-GR8-ZY-SAE | FLAT WASHER | Flat Washer GRADE 8 STEEL ZINC YELLOW SAE |
| 570 | ||
| HHC3/8-16X5/8-GR8-ZY | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 349 | ||
| FLW3/8-GR8-ZY | FLAT WASHER | Flat Washer GRADE 8 STEEL ZINC YELLOW |
| 328 | ||
| HHC3/8-16X7/8-GR8-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 100 | ||
| HXN5/16-18-GR8-STL | HEX NUT | Hex Nut STEEL |
| 95 | ||
| HHC5/16-18X1-1/8-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 74 | ||
| FSC3/8-16X1-3/8-GR8-ZY | FLAT HEAD SOCKET CA | Flat Head Socket Cap Screw |
| 50 | ||
| FLW5/8-GR5-ZI | FLAT WASHER | Flat Washer GRADE 5 STEEL ZINC |
| 30 | ||
| FLW3/8-GR8-ZA-SAE | FLAT WASHER | Flat Washer GRADE 8 STEEL SAE |
| 22 | ||
| HXN1-8-GR8-ZY | HEX NUT | Hex Nut GRADE 8 STEEL ZINC YELLOW |
| 20 | ||
| 29F038GR | Essentra Components | FLOWERETTE PRESS LOCK THUMB SC | 0 | |||
![]() EBV Elektronik | LRTBR98G-R5T-1+S7T7-35+PQ-25 | ams OSRAM Group | LED TriColor BlueGreenRed 470nm528nm625nm Chip LED 6Pin SMD TR (Alt: Q65111A3103) RoHS : Compliant | 156,000 | ||
| MC908GR16CFAE | NXP Semiconductors | 8 Bit MCU HC08 Family HC08GR Series Microcontrollers HC08 8 MHz 16 KB 48 Pins LQFP (Alt: MC908GR16CFAE) RoHS : Compliant | 250 | |||
| MC908GR16VFAE | NXP Semiconductors | MCU 8bit HC08 CISC 16KB Flash 33V5V 48Pin LQFP Tray (Alt: MC908GR16VFAE) RoHS : Compliant | 0 | |||
| BZT52B6V8-G RHG | Taiwan Semiconductor | (Alt: BZT52B6V8-G RHG) RoHS : Compliant | 0 | |||
| MC908GR60ACFAE | NXP Semiconductors | 8 Bit MCU HC08 Family HC08GR Series Microcontrollers HC08 8 MHz 60 KB 48 Pins LQFP (Alt: MC908GR60ACFAE) RoHS : Compliant | 0 | |||
| MC908GR32AMFUE | NXP Semiconductors | 8bit MCU HC08 8 MHz 32 KB 15 KB 64 Pins PQFP (Alt: MC908GR32AMFUE) RoHS : Compliant | 0 | |||
| MC908GR16ACFAE | NXP Semiconductors | 8 Bit MCU HC08 Family HC08GR Series Microcontrollers (Alt: MC908GR16ACFAE) RoHS : Compliant | 0 | |||
| 2SA1588-GR,LF(T | Toshiba America Electronic Components | (Alt: 2SA1588-GR,LF(T) RoHS : Compliant | 0 | |||
| S908GR48AH0CFAER | NXP Semiconductors | Freescale Automotiv MCUs (Alt: S908GR48AH0CFAER) RoHS : Compliant | 0 | |||
| MC68908GR16CFJE | NXP Semiconductors | 8 Bit MCU HC08 Family HC08GR Series Microcontrollers HC08 8 MHz 16 KB 32 Pins LQFP (Alt: MC68908GR16CFJE) RoHS : Compliant | 0 | |||
| 2SC4738-GR,LF(T | Toshiba America Electronic Components | (Alt: 2SC4738-GR,LF(T) RoHS : Compliant | 0 | |||
| MC68908GR16VFJE | NXP Semiconductors | MCU 8bit HC08 CISC 16KB Flash 33V5V 32Pin LQFP (Alt: MC68908GR16VFJE) RoHS : Compliant | 0 | |||
| IS31LT3178-GRLS4-TR | Lumissil Microsystems | Adjustable linear current devices with excellent temperature stability and can drive LED strings cl (Alt: IS31LT3178-GRLS4-TR) RoHS : Compliant | 0 | |||
| IS31LT3948-GRLS4-TR | Lumissil Microsystems | A PFM stepup DCDC converter designed for driving the white LED arrays for large size LCD panel ba (Alt: IS31LT3948-GRLS4-TR) RoHS : Compliant | 0 | |||
| IS32LT3168-GRLA3-TR | Lumissil Microsystems | single channel linear led driver with halleffect switch and fade inout function (Alt: IS32LT3168-GRLA3-TR) RoHS : Compliant | 0 | |||
![]() FDH Electronics | VC-531-8 GREEN | Caplugs | Connector Acc |
| 3,633 | |
| 1/8-GREEN-INCH | SUMITOMO ELECTRIC Industries Ltd | Harness Mgmt | 2,540 | |||
| SM3-12 3/8 GREEN SPL | SUMITOMO ELECTRIC Industries Ltd | Identification | 1,551 | |||
| ALPHA 6718 GRN | Alpha Wire | Wire and Cable |
| 975 | ||
| ADM-25M8-GR | Miscellaneous | Other Products | 136 | |||
| ALPHA 6828-GREEN | Alpha Wire | Wire and Cable | 100 | |||
| TMDE-50PS48GR | W L Gore & Associates | Cable Assembly |
| 3 | ||
| IM48GR | TE Connectivity | Relays RoHS : Compliant | 0 | |||
![]() Flip Electronics | MC908GR32ACFJ | NXP Semiconductors | Stock | 7,659 | ||
| UPA2738GR-E1-AX | Renesas Electronics Corporation | Stock RoHS : Compliant | 7,500 | |||
| MCHC908GR4ACFAE | NXP Semiconductors | Stock | 5,612 | |||
| MC908GR32AMFUE | NXP Semiconductors | Stock RoHS : Compliant | 3,360 | |||
| S908GR16AE0CFAER | NXP Semiconductors | Stock RoHS : Compliant | 2,000 | |||
| KCHC908GR8ACFAE | NXP Semiconductors | Stock, Ship Today |
| 2,000 | ||
| MC908GR60ACFUE | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 1,680 | ||
| MC68HC908GR4CFAE | NXP Semiconductors | Stock RoHS : Compliant | 1,250 | |||
| MC908GR60ACFAE | NXP Semiconductors | Stock RoHS : Compliant | 1,000 | |||
| KC908GR60ACFAE | NXP Semiconductors | Stock | 1,000 | |||
| KCHC908GR8MFAE | NXP Semiconductors | Stock, Ship Today |
| 950 | ||
| KC68908GR16MFJE | NXP Semiconductors | Stock, Ship Today |
| 800 | ||
| MC68908GR16MFJE | NXP Semiconductors | Stock RoHS : Compliant | 800 | |||
| MC68908GR16CFJE | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 459 | ||
| MCHC908GR8CFAE | NXP Semiconductors | Stock RoHS : Compliant | 12 | |||
![]() Maritex | GLAND-P0908-GR-LN-NO-CT | CONNTHERM | Cable gland PG9; nylon; P9 4-8mm; grey; with lock nut; no O-ring |
| 200 | |
| P2118-GR-LN | BEISIT | Cable gland PG21; nylon; PG21 13-18mm; grey; flat O-ring; with lock-nut |
| 100 | ||
| P0908-GR-LN | BEISIT | Cable gland PG9; nylon; P9 4-8mm; grey; with lock nut |
| 99 | ||
| GLAND-P0908-GR-LN-CT | CONNTHERM | Cable gland PG9; nylon; P9 4-8mm; grey; with lock nut |
| 25 | ||
![]() Pasternack Enterprises US | PE3C8818/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax. | 471 | ||
| PE3C8748/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-GR, RF Cable Type: Belden 4855R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable Using 75 Ohm 4855R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4855R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4855R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/GR, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/GR is built with belden 4855R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/GR can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4855R-GR coax. | 417 | |||
| PE3C8818/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-72, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-72 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-120 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-12 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-36, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-36 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8748/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-GR, RF Cable Type: Belden 4855R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4855R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/GR-120, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/GR-120 is built with belden 4855R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/GR-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-GR coax. |
| 89 | ||
| PE3C8748/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-GR, RF Cable Type: Belden 4855R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4855R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/GR-12, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/GR-12 is built with belden 4855R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/GR-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4855R-GR coax. |
| 89 | ||
| PE3C8748/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-GR, RF Cable Type: Belden 4855R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4855R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4855R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4855R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/GR-72, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/GR-72 is built with belden 4855R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/GR-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4855R-GR coax. |
| 89 | ||
| PE3C8748/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-GR, RF Cable Type: Belden 4855R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 36 Inch Length Using 75 Ohm 4855R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4855R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4855R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/GR-36, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/GR-36 is built with belden 4855R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/GR-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4855R-GR coax. |
| 89 | ||
| PE3C8748/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-GR, RF Cable Type: Belden 4855R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4855R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4855R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4855R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/GR-300, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/GR-300 is built with belden 4855R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/GR-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4855R-GR coax. |
| 61 | ||
| PE3C8818/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-300 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax. |
| 51 | ||
| PE3C1128/GR/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm. N Male to SMA Female Cable Using PE-P142LL Coax with HeatShrink., Pasternack’s PE3C1128/GR/HS type N male to SMA female RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and an SMA cable connection on the other. Our type N to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3C1128/GR/HS can also be known as a type N plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1128/GR/HS RF cable has an FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our type N male to SMA female cable has a maximum VSWR of 1.322:1. This PE3C1128/GR/HS type N plug to SMA jack cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C1128/GR/HS can also be used in the other direction and will be an SMA female to type N male cable assembly if the opposite connectivity is required. This type N plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements. | 0 | |||
![]() Venkel Ltd. | MFPI160808G-R47MT | VENKEL LTD | Multilayer Power Inductor; 160808; 0.47uH; �20% RoHS : Compliant | 4,000 | ||
| MFPI160808G-R24MT | VENKEL LTD | Multilayer Power Inductor; 160808; 0.24uH; �20% RoHS : Compliant | 4,000 | |||
![]() Vyrian | REF198GRU-REEL![]() | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 4.096V, CMOS, PDSO8 RoHS : Not Compliant | 9,430 | ||
| 5858GR005 | Alpha Wire | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 8,552 | |||
LM4308GR![]() | Texas Instruments | Liquid Crystal Driver, 1 Func, PBGA49 | 7,648 | |||
NAND08GR3B2CN1T![]() | Micron Technology Inc | Flash, 1GX8, 35ns, PDSO48 | 6,763 | |||
NAND08GR3B2BN6T![]() | Micron Technology Inc | Flash, 1GX8, 35ns, PDSO48 | 6,415 | |||
| NAND08GR3B4CN1E | Micron Technology Inc | Flash, 1MX8, 30ns, PDSO48 | 5,752 | |||
| UPC358GR(5)-9LG-E1-A | Renesas Electronics Corporation | Operational Amplifier, 2 Func, 3000uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 4,659 | |||
NAND08GR4B2BN6T![]() | Micron Technology Inc | Flash, 512MX16, 35ns, PDSO48 | 4,305 | |||
NAND08GR3B2BN6F![]() | Micron Technology Inc | Flash, 1GX8, 35ns, PDSO48 RoHS : Compliant | 4,087 | |||
| NAND08GR4B2CZL6E | Micron Technology Inc | Flash, 1MX8, 30ns, PBGA52 | 3,902 | |||
NAND08GR3B2BN1F![]() | Micron Technology Inc | Flash, 1GX8, 35ns, PDSO48 RoHS : Compliant | 3,304 | |||
| NAND08GR3B4CZL6F | Micron Technology Inc | Flash, 1MX8, 30ns, PBGA52 RoHS : Compliant | 3,284 | |||
| NAND08GR3B4CN1F | Micron Technology Inc | Flash, 1MX8, 30ns, PDSO48 | 2,553 | |||
NAND08GR3B2AN6![]() | Micron Technology Inc | Flash, 1GX8, 35ns, PDSO48 | 2,545 | |||
NAND08GR3B2CN1![]() | Micron Technology Inc | Flash, 1GX8, 35ns, PDSO48 | 2,331 | |||
![]() Win Source Electronics | 2SC4738-GR | Toshiba America Electronic Components | TRANS NPN 50V 0.15A SSM RoHS : Compliant |
| 272,090 | |
| UPC358GR-9LG-E2-A | NEC Electronics Group | BIPOLAR ANALOG INTEGRATED CIRCUIT SINGLE POWER SUPPLY DUAL OPERATIONAL AMPLIFIERS |
| 32,035 | ||
| MPQ4228GRE-C-AEC1-Z | Monolithic Power Systems | 3A, 36V, STEP-DOWN CONVERTER WIT RoHS : Compliant |
| 30,000 | ||
| UPC358GR-9LG-E1-A | NEC Electronics Group | BIPOLAR ANALOG INTEGRATED CIRCUIT SINGLE POWER SUPPLY DUAL OPERATIONAL AMPLIFIERS |
| 29,540 | ||
| UPC358GR-9LG-E1-A/JM | Renesas Electronics Corporation |
| 29,460 | |||
| IS31FL3218-GRLS2 | Lumissil Microsystems | IC LED DRVR LIN I2C 38MA 24SOP / LED Driver IC 18 Output Linear I²C Dimming 38mA 24-SOP RoHS : Compliant |
| 12,000 | ||
| IS31LT3948-GRLS4-TR | Lumissil Microsystems | IC LED DRIVER CTRLR PWM 8SOP / LED Driver IC 1 Output DC DC Controller Step-Up (Boost) PWM Dimming 8-SOP RoHS : Compliant |
| 10,771 | ||
| ALC898-GR | Realtek Semiconductor |
| 5,000 | |||
| ALC888-GR | Realtek Semiconductor | PCM Audio Codec 2ADC / 10DAC Ch 48-Pin LQFP |
| 1,746 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |