00118TPK-R Price, 販売店, Stock

Ind Pressure Sensor PRESSURE SWITCH, Op P: 0-150psi, Set: 10psi, Single Cir SPST-NC, 2 Screw Term, Conn: 1/8 -27 NPT M thread, Op: -40~250°F
RoHS : Compliant

1 : $159.99

30-01-04-500-01

Grayhill Inc

Switch Push Button N.O. SPST Square Button 1A 220VAC Panel Mount
RoHS : Compliant

1 : $114.99

XP0740S0162001UR6XRS001T002XX

APEM Inc

Joysticks XP Series Fingertip Controller

1 : $1,499.99

32001-002700-100-RS

iEi Integration Corporation

USB cable (old Model: 32001-002700-200-RS/32000-044300-RS)

1 : $34.99

PT9420-0100-121-1110

TE Connectivity

Linear Displacement Sensors NEMA 6 String Potentiometer

1 : $3,799.99

B-700-1036-001-AX

Axiom Manufacturing

SFP OC-48C/STM-16 SHORT-REACH 2KM 1310NM WAVELENGTH

1 : $257.29

1SAR700100R0010

ABB Low Voltage Products and Systems

C512-W Temp monitor relay, R: -50~500°C, Control Vs: 24-240 VUC, 2 c/o (SPDT) + 1 n/o, Screw Terminals

1 : $1,091.05

05100001001

Wera Werk Hermann Werner GmbH & Co. KG

160 i SB VDE Insulated screwdriver for slotted screws

1 : $34.99

Pasternack Enterprises US

PE3C6200-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum N Male to N Female Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum N male to N female low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to N female low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-NM-LP N type to TC-SPP250-NF-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-NM-LP type N cable connection on one end and TC-SPP250-NF-LP N type cable connection on the other. Our low PIM TC-250-NM-LP type N to TC-SPP250-NF-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-250-NM-LP type N to TC-SPP250-NF-LP type N cable is a male to female coax assembly, PE3C6200-12, can also be known as a low PIM TC-250-NM-LP N type plug to TC-SPP250-NF-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-250-NM-LP N type plug to TC-SPP250-NF-LP type N jack cable assembly PE3C6200-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-NM-LP N cable assembly is manufactured with TC-250-NM-LP N type to TC-SPP250-NF-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-NM-LP type N male to TC-SPP250-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6200-12 can also be used in the other direction and will be TC-SPP250-NF-LP type N female to TC-250-NM-LP N type male cable assembly if the opposite connectivity is required. Low PIM TC-250-NM-LP type N plug to TC-SPP250-NF-LP N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-NM-LP type N to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-NM-LP N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to N female low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts.

1 : $91.99
25 : $87.39
50 : $82.79
100 : $79.11

PEWCT1001

Pasternack Enterprises

1 : $2,220.0
5 : $2,131.2
10 : $2,042.4

PE3W00010-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to N Male Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to N male cable 24 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N male cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our a SMA to a type N cable assembly has male gender on end 1 and male on end 2. PE3W00010-24 can also be known as a SMA plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W00010-24 RF cable has a FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. SMA plug to type N plug cable assembly PE3W00010-24 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W00010-24 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements.

1 : $91.99
25 : $87.39
50 : $82.79
100 : $79.11

PEW42S001-4

Pasternack Enterprises

Key Specifications. Waveguide Size 1 WR-42 Waveguide Size 2 WR-42 Length 3.94 inches Frequency, Min 17.6 GHz Frequency, Max 26.7 GHz Flange Type 1 UG Cover Flange Type 2 UG Grooved. WR-42 Straight Waveguide Section 4 Inch Length, UG Square Cover and Grooved Flange from 17.6 GHz to 26.7 GHz., Pasternack’s PEW42S001-4 is a WR-42 4-inch waveguide straight section with a square cover flange. This waveguide section has a frequency range of 17.6 to 26.7 GHz. The waveguide section is made of brass and protective paint. This waveguide section offers a maximum 1.05:1 VSWR. The straight waveguide section has an UG cover and grooved flange. This WR-42 4-inch waveguide section is ideal for test and measurement, research and development, and satellite communications. Pasternack has one of the largest in-stock selections of the waveguide straight section with a square cover flange for same-day shipment. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal WR-42 4-inch waveguide section for your requirements.

1 : $257.99
10 : $252.83
25 : $247.67
100 : $242.51

PEW90CP001-30

Pasternack Enterprises

Key Specifications. Flange Type UG Cover Flange Flange Group Standard Minimum Frequency 8.2 GHz Maximum Frequency 12.5 GHz Maximum VSWR 1.25:1 Maximum Insertion Loss 0.15 dB Coupling 30 dB. WR-90 Waveguide 30 dB Broadwall Coupler, UG Cover Flange,N-Type Female Coupled Port, 8.2 GHz to 12.5 GHz, Copper. The PEW90CP001-30 is a WR-90 Directional Broadwall waveguide coupler with N female coupled port that operates in thefrequency range of 8.2 to 12.5 GHz. This Waveguide component has a maximum VSWR of 1.25:1. These designs are made ofpainted copper alloy and incorporate a broad wall configuration that result in a mid-band nominal coupling value of 10, 20, 30,40 or 50 dB. Common applications for this component would be where power measurements are required within a system formeasuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Pasternack offersa complete family of waveguide Crossguide and Broadwall couplers that are in-stock and ship same day.

1 : $2,550.0
5 : $2,499.0
10 : $2,448.0
25 : $2,397.0

PE-W19TS22001

Pasternack Enterprises

1 : $585.0
5 : $561.6
10 : $538.2

PE-W42CR001

Pasternack Enterprises

Key Specifications. Minimum Frequency: 17.6 GHz Maximum Frequency: 26.7 GHz Waveguide size: WR-42 VSWR(Max): 1.3:1 Insertion Loss: 0.3 dB Isolation (min) : 18 dB Forward Power (CW)(Max): 30 Watts Input Power (Peak): 500 Watts. WR-42 Waveguide Circulator, 17.6 GHz to 26.7 GHz, 18 dB min Isolation, Cover Flange, Aluminum. The PE-W42CR001 is a Waveguide Circulator offering 18 dB minimum isolation over the K band frequency range of 17.6 to 26.7 GHz. The design achieves high isolation with wide band performance and the WR-42 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 30 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability.

1 : $1,530.0
5 : $1,468.8
10 : $1,407.6
25 : $1,346.4

PE-W75CR001

Pasternack Enterprises

Key Specifications. Minimum Frequency: 9.84 GHz Maximum Frequency: 15 GHz Waveguide size: WR-75 VSWR(Max): 1.25:1 Insertion Loss: 0.3 dB Isolation (min) : 20 dB Forward Power (CW)(Max): 100 Watts Input Power (Peak): 3 KWatts. WR-75 Waveguide Circulator, 9.84 GHz to 15 GHz, 20 dB min Isolation, Cover Flange, Aluminum. The PE-W75CR001 is a Waveguide Circulator offering 20 dB minimum isolation over the X band frequency range of 9.84 to 15 GHz. The design achieves high isolation with wide band performance and the WR-75 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 100 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability.

1 : $1,460.0
5 : $1,401.6
10 : $1,343.2
25 : $1,284.8

PE-W42S001-9

Pasternack Enterprises

Key Specifications, Waveguide Size 1: WR-42, Flange Size 1: UG595/U, Waveguide Size 2: WR-42, Flange Size 2: UG595/U, Length: 9 inches, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Instrumentation Grade Straight Waveguide Section 9 Inch Length with UG595/U Flange Operating from 18 GHz to 26.5 GHz. PE-W42S001-9 WR-42 waveguide section is straight and is 9 inches long. This 9 inch WR-42 straight waveguide section from Pasternack is instrumentation grade and has a UG595/U flange. Our straight WR-42 waveguide section with UG595/U flange has a minimum frequency of 18 GHz and a maximum frequency of 26.5 GHz. WR-42 waveguide section PE-W42S001-9 is part of over 40,000 RF, microwave and millimeter wave components. Our instrumentation grade WR-42 straight waveguide section will ship same the day as it is purchased worldwide as with our other RF parts.

1 : $493.99
10 : $474.23
25 : $454.47
100 : $434.71

PE-W75S001-3

Pasternack Enterprises

Key Specifications, Waveguide Size 1: WR-75, Flange Size 1: UBR120, Waveguide Size 2: WR-75, Flange Size 2: UBR120, Length: 3 inches, Frequency, Min: 10 GHz, Frequency, Max: 15 GHz. WR-75 Commercial Grade Straight Waveguide Section 3 Inch Length with UBR120 Flange Operating from 10 GHz to 15 GHz. PE-W75S001-3 WR-75 waveguide section is straight and is 3 inches long. This 3 inch WR-75 straight waveguide section from Pasternack is commercial grade and has a UBR120 flange. Our straight WR-75 waveguide section with UBR120 flange has a minimum frequency of 10 GHz and a maximum frequency of 15 GHz. WR-75 waveguide section PE-W75S001-3 is part of over 40,000 RF, microwave and millimeter wave components. Our commercial grade WR-75 straight waveguide section will ship same the day as it is purchased worldwide as with our other RF parts.

1 : $540.0
10 : $518.4
25 : $496.8

PE3C0015/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Male Right Angle Cable Using RG8X Coax with HeatShrink. PE3C0015/HS is a BNC male right angle to BNC male right angle cable using RG8X coax. This Pasternack BNC male right angle to BNC male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0015/HS BNC male right angle to BNC male right angle cable assembly is constructed with RG8X coax.

PE3C9001

Pasternack Enterprises

PE3M0011-36

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 36 inches. MIL-DTL-17 N Female to N Female Cable 36 Inch Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female to N female cable 36 inch length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female to N female cable 36 inch length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/02-0503 type N to M39012/02-0503 N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/02-0503 type N cable connection on one end and M39012/02-0503 type N cable connection on the other. Our M39012/02-0503 N type to M39012/02-0503 type N cable assemblies have a female gender on end 1 and female on end 2. This M39012/02-0503 N type to M39012/02-0503 type N cable is a female to female coax assembly, PE3M0011-36, can also be known as a MIL-DTL-17/MIL-C-17 M39012/02-0503 type N jack to M39012/02-0503 N type jack cable assembly and will be shipped same-day as it is purchased. M39012/02-0503 type N jack to M39012/02-0503 type N jack cable assembly PE3M0011-36 is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/02-0503 N cable assembly is manufactured with M39012/02-0503 N type to M39012/02-0503 type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/02-0503 type N female to M39012/02-0503 N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/02-0503 N type jack to M39012/02-0503 type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/02-0503 type N to M39012/02-0503 type N cable assembly for quick shipment worldwide. Variations of M39012/02-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female to N female cable 36 inch length using M17/60-RG142 coax.

1 : $277.99
25 : $264.09
50 : $250.19

PE3W00114/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm F Male to 75 Ohm BNC Male Right Angle Cable. PE3W00114/HS is a F male to BNC male right angle cable using RG59 coax. This Pasternack F male to BNC male right angle cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm BNC for connector 2. F to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male F to male BNC right angle cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W00114/HS F male to BNC male right angle cable assembly is constructed with RG59 coax.

PE3W00118LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Male Right Angle Cable Using LMR-100 Coax with HeatShrink, LF Solder. PE3W00118LF/HS is a BNC male right angle to BNC male right angle cable using LMR-100A coax. This Pasternack BNC male right angle to BNC male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00118LF/HS BNC male right angle to BNC male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

Teledyne HiRel

00118TPK-R 販売店

リンク URL