 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
01212SF-R18 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 Avnet Americas | 39-01-2101 | Molex | Connector Housing, Plug, 10 Contacts, 2 Rows, 4.2 mm, Panel Mount, 5559 Series, Nylon, Mini-Fit Jr. - Bulk (Alt: 0039012101) RoHS : Compliant |
| 42,160 | |
| 39-01-2121 | Molex | Connector Housing, Plug, 12 Contacts, 2 Rows, 4.2 mm, Panel Mount, 5559 Series, Nylon, Mini-Fit Jr. - Bulk (Alt: 0039012121) RoHS : Compliant |
| 23,490 | ||
| 87760-1216 | Molex | - Trays (Alt: 0877601216) RoHS : Compliant |
| 14,600 | ||
| RLB9012-152KL | Bourns Inc | - Trays (Alt: RLB9012-152KL) RoHS : Not Compliant |
| 8,089 | ||
| BKPA002012104R7M00 | Pulse Electronics Corporation | - Tape and Reel (Alt: BKPA002012104R7M00) RoHS : Compliant |
| 6,000 | ||
| PM1210-121J-RC | Bourns Inc | - Tape and Reel (Alt: PM1210-121J-RC) RoHS : Compliant |
| 6,000 | ||
| 39-01-2125 | Molex | Connector Housing, Receptacle, 12 Contacts, 2 Rows, 4.2 mm, 5557 Series, Nylon, Mini-Fit Jr. - Bulk (Alt: 0039012125) RoHS : Compliant |
| 3,765 | ||
| 105310-1210 | Molex | Pin Header, 10 Contacts, 2 Rows, 2.5mm, Gold, 7.5A, Straight, Shrouded, Brass, Wire-to-Board, THT - Bulk (Alt: 1053101210) RoHS : Compliant |
| 3,295 | ||
| 078430-1210 | ITT Interconnect Solutions | 078430-1210 - Bulk (Alt: 078430-1210) RoHS : Not Compliant |
| 2,300 | ||
| 39-01-2145 | Molex | Connector Housing, Receptacle, 14 Contacts, 2 Rows, 4.2 mm, 5557 Series, Nylon, Mini-Fit Jr. - Bulk (Alt: 0039012145) RoHS : Compliant |
| 1,306 | ||
| 131-8701-211 | Bel Fuse | - Bag (Alt: 131-8701-211) RoHS : Compliant |
| 175 | ||
| 73287-0121 | Molex | RF Fixed Attenuator, 15 dB, 2 W, Stainless Steel, DC to 18GHz, 50 ohm, -65?C to +125?C - Bulk (Alt: 0732870121) RoHS : Compliant |
| 50 | ||
| DPP120-12-1 | TDK Corporation | - Bulk (Alt: DPP120-12-1) RoHS : Compliant |
| 44 | ||
| 133-3801-211 | Bel Fuse | - Bag (Alt: 133-3801-211) RoHS : Compliant |
| 33 | ||
| CCG10-12-15DR | TDK Corporation | - Bulk (Alt: CCG10-12-15DR) RoHS : Not Compliant |
| 20 | ||
 Newark | RH100-16.000-12-1010-EXT-TR | Raltron Electronics Corporation | Crystal, 16Mhz, 12Pf, Smd, 3.2Mm X 2.5Mm; |Raltron RH100-16.000-12-1010-EXT-TR RoHS : Compliant |
| 4,295 | |
| RH100-16.000-12-1010-EXT-TR | Raltron Electronics Corporation | Crystal, 16Mhz, 12Pf, Smd, 3.2Mm X 2.5Mm; |Raltron RH100-16.000-12-1010-EXT-TR RoHS : Compliant |
| 4,295 | ||
| MP-7E-26.00-12-10-80-B-10 | SPC Multicomp | Crystal, 26Mhz, 12Pf, Smd, 2.5Mm X 2Mm; |Multicomp Pro MP-7E-26.00-12-10-80-B-10 RoHS : Compliant |
| 3,000 | ||
| MP-7F-30.00-12-10-60-B-10 | SPC Multicomp | Crystal, 30Mhz, 12Pf, Smd, 2Mm X 1.6Mm; |Multicomp Pro MP-7F-30.00-12-10-60-B-10 RoHS : Compliant |
| 3,000 | ||
| BWCU00201212121M02 | Pulse Electronics Corporation | Comm Mode Choke, 50Vdc, 120 Ohm, 0805; |Pulse Electronics BWCU00201212121M02 RoHS : Compliant |
| 2,000 | ||
| 39-01-2166 | Molex | Connector Housing, Plug, 16Pos, 4.2Mm; |Molex 39-01-2166 RoHS : Compliant |
| 1,689 | ||
| 39-01-2166 | Molex | Conn Housing, 4.2Mm, Plug, 16Positions; |Molex 39-01-2166 RoHS : Compliant |
| 1,125 | ||
| 90120-0121 | Molex | Conn, Pin Hdr, 1Pos, Signal, Th; |Molex 90120-0121 RoHS : Compliant |
| 485 | ||
| 34729-0121 | Molex | Automotive Housing, Rcpt, 12Pos, 10A; |Molex 34729-0121 RoHS : Compliant |
| 310 | ||
| BEDC110NN00001216000 | TE Connectivity | Circular Connector, Rcpt, 8Pos, Flange; |Te Connectivity Intercontec BEDC110NN00001216000 RoHS : Compliant |
| 84 | ||
| C091 31G012 100 5 U | Amphenol Sine Systems | Circular Conn, Rcpt, 12Pos, Solder; |Amphenol Sine/tuchel C091 31G012 100 5 U RoHS : Compliant |
| 83 | ||
| C091 31G012 100 5 U | Amphenol Sine Systems | Circular Conn, Rcpt, 12Pos, Solder; Product Range:C091 Series; Circular Connector Shell Style:Panel Mount Receptacle; No. Of Contacts:12Contacts; Circular Contact Type:Solder Socket; Coupling Style:Quicklock; Contact Material:- Rohs Compliant: Yes RoHS : Compliant |
| 50 | ||
| 98-24012-1 | TE Connectivity | Emi Jam Nut Seal, 14Mm Id, Fna; |Te Connectivity 98-24012-1 RoHS : Compliant |
| 20 | ||
| 101219 | Flirc.tv Inc | Case, Flirc, Black/Silver, Pi 2/3B/3B+; |Flirc 101219 (Alternate Part Number: 090281102647 RoHS : Not Compliant |
| 17 | ||
| BTS700121ESPDAUGHBDTOBO1 | Infineon Technologies AG | Daughter Board, Profet+2 12V Motherboard; |Infineon Technologies BTS700121ESPDAUGHBDTOBO1 RoHS : Not Compliant |
| 1 | ||
 NXP Semiconductors | NX30P0121UKZ | NXP Semiconductors | High-Voltage Back-to-Back OVP Switch with Current Sense, Reel 7" Q1/T1 in Drypack RoHS : Compliant |
| 0 | |
 RS | CA1-B0-36-630-121-D (CA1B036630121D | CA1-B0-36-630-121-D | CA1B036630121D) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 1P SERIESTRIP DC50/60HZ LONG 30A STUD DUAL LEGEND |
| 112 | |
| CA1-B0-34-650-121-C (CA1B034650121C | CA1-B0-34-650-121-C | CA1B034650121C) | Carling Technologies | CIRCUIT BREAKER MAGNETIC/HYDRAULIC HANDLE 50A PANEL 1 POLE 480 WYE/277VAC |
| 74 | ||
| CA1-B0-34-630-121-D (CA1B034630121D|CA1-B0-34-630-121-D|CA1B034630121D) | Carling Technologies | CIRCUIT BREAKER;HYD/MAG;HANDLE;1P;SERIESTRIP;DC 50/60HZ MED;30A;STUD;DUAL LEGEND |
| 18 | ||
| CA1-B0-10-610-121-D (CA1B010610121D | CA1-B0-10-610-121-D | CA1B010610121D) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 12 | ||
| CA1-B0-12-620-121-D (CA1B012620121D | CA1-B0-12-620-121-D | CA1B012620121D) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 11 | ||
| CA2-B0-34-620-121-D (CA2B034620121D|CA2-B0-34-620-121-D|CA2B034620121D) | Carling Technologies | CIRCUIT BREAKER;HYD/MAG;HANDLE;2P;SERIESTRIP;DC 50/60HZ MED;20A;STUD;DUAL LEGEND |
| 9 | ||
| CA2-B0-34-630-121-D (CA2B034630121D|CA2-B0-34-630-121-D|CA2B034630121D) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 2P SERIESTRIP DC 50/60HZ MED 30A STUD DUAL LEGEND |
| 5 | ||
| CA1-B0-34-430-121-C (CA1B034430121C|CA1-B0-34-430-121-C|CA1B034430121C) | Carling Technologies | C-SERIES CIRCUIT BREAKER |
| 5 | ||
| CA2-B0-24-640-121-D (CA2B024640121D | CA2-B0-24-640-121-D | CA2B024640121D) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 4 | ||
| CT1-B2-12-650-121-MG (CT1B212650121MG | CT1-B2-12-650-121-MG | CT1B212650121MG) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 4 | ||
| CT1-B2-12-650-121-D (CT1B212650121D | CT1-B2-12-650-121-D | CT1B212650121D) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 2 | ||
| CB2-B2-12-640-121-D (CB2B212640121D | CB2-B2-12-640-121-D | CB2B212640121D) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 2 | ||
| CT1-B2-12-650-121-MF (CT1B212650121MF | CT1-B2-12-650-121-MF | CT1B212650121MF) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 2 | ||
| CA3-B0-44-620-121-C (CA3B044620121C | CA3-B0-44-620-121-C | CA3B044620121C) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 1 | ||
| 0121 | Bimba Manufacturing Company | CYLINDER, O.L.,S.R.; 7/16IN BORE; STROKE: 21IN |
| 0 | ||
 Microchip Technology Inc | MIC37101-2.1YM | Microchip Technology Inc | LV, 1.0A uCap fixed Vout LDO, SOIC, Projected EOL: 2036-04-20 RoHS : Compliant |
| 8,360 | |
| ZL30121GGG2V2 | Microchip Technology Inc | Rev 2 Pb Free Low Jitter System Synchro, LFBGA, Projected EOL: 2046-04-25 RoHS : Compliant |
| 7,020 | ||
| OX-228-0012-10M0000000 | Microchip Technology Inc | OX-228-0012-10M0000000, Projected EOL: 2051-02-13 - Contact for Pricing | 20 | |||
| B10121 | Microchip Technology Inc | INIC Evaluation Platform OS81050, Projected EOL: - Contact for Pricing | 0 | |||
| KV2601-217 | Microchip Technology Inc | Si TVAR Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| KV1801-217 | Microchip Technology Inc | Si TVAR Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| GC15012-17 | Microchip Technology Inc | Si TVAR Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| MV31012-150A | Microchip Technology Inc | GaAs TVAR Non Hermetic EPSM SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| GC15012-150A | Microchip Technology Inc | Si TVAR Non Hermetic EPSM SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| 990-50201-211 | Microchip Technology Inc | OBS LC03400 03-24 BUNDLE OF 090-50201-211 WITH AC POWER CORD, Projected EOL: 2028-01-13 - Contact for Pricing | 0 | |||
| 090-50201-212 | Microchip Technology Inc | OBS LC03400 03-24 TP2700 GRANDMASTER AC GNSS RUBIDIUM 8 CLIENTS, Projected EOL: 2028-01-13 - Contact for Pricing | 0 | |||
| C4400A1-0012-12M0 | Microchip Technology Inc | C4400A1-0012-12M0, Projected EOL: 2051-02-13 - Contact for Pricing | 0 | |||
| VX-504-0012-122M88 | Microchip Technology Inc | VX-504-0012-122M88, Projected EOL: 2051-02-11 - Contact for Pricing | 0 | |||
| DSC6001CI2A-012.1732 | Microchip Technology Inc | MEMS OSC, LVCMOS, 12.1732MHz, 25PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2028-11-06 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSC6001CI2A-012.1732T | Microchip Technology Inc | MEMS OSC, LVCMOS, 12.1732MHz, 25PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2028-11-06 - Contact for Pricing RoHS : Compliant | 0 | |||
 Rochester Electronics | BB201,215 | NXP Semiconductors | Variable Capacitance Diode, 95pF C(T), Silicon, Abrupt, TO-236AB RoHS : Compliant |
| 33 | |
| BC807-40/S501,215 | NXP Semiconductors | Small Signal Bipolar Transistor, 0.5A, 45V, PNP, TO-236AB RoHS : Compliant |
| 6,000 | ||
| PSMN012-100YSFX | Nexperia | PSMN012-100YSF/SOT669/LFPAK RoHS : Compliant |
| 1,500 | ||
BSH201,215 | Nexperia | Small Signal Field-Effect Transistor, 0.3A I(D), 60V, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant |
| 78,025 | ||
| BTS50121EKAXUMA1 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver, 10A, PDSO14 RoHS : Compliant |
| 619,601 | ||
BQ501210RGCT | Texas Instruments | Specialized Power Management Wireless Power Transmitter 64-QFN T/R RoHS : Compliant |
| 250 | ||
TPS60121PWP | Texas Instruments | IC VOLT REG Fixed Step-Up Charge Pump 1 OUT 3.3V 200mA 20-SOP Tube RoHS : Compliant |
| 6,074 | ||
CY8C20121-SX1I | Cypress Semiconductor | Microprocessor Circuit, CMOS, PDSO8 RoHS : Compliant |
| 202 | ||
| MIC5301-2.1YD5 | Micrel Inc | Fixed Positive LDO Regulator, 2.1V, 0.1V Dropout, CMOS, PDSO5 RoHS : Compliant |
| 3,476 | ||
| 100121DCQR | National Semiconductor Corporation | Inverter, 100K Series, 9-Func, 1-Input, ECL, CDIP24 RoHS : Not Compliant |
| 2,021 | ||
| 544DCCB000121CCGR | Skyworks Solutions Inc | Differential/single-ended; Any frequency (I2C) XO; 0.2-1500 MHz |
| 500 | ||
| 570AAA000121DG | Skyworks Solutions Inc | Differential/single-ended; I2C programmable XO; OE pin 2; 10-1417 MHz RoHS : Compliant |
| 6 | ||
| 570BBB000121DGR | Skyworks Solutions Inc | Differential/single-ended; I2C programmable XO; OE pin 2; 10-1417 MHz RoHS : Compliant |
| 296 | ||
| 570KCB000121DG | Skyworks Solutions Inc | CRYSTAL OSC XO (Standard) CML 100MHz 1.71V ~ 1.89V ±7ppm 8-SMD Tape RoHS : Compliant |
| 25 | ||
| 570MBC000121DG | Skyworks Solutions Inc | Differential/single-ended; I2C programmable XO; OE pin 2; 10-1417 MHz RoHS : Compliant |
| 42 | ||
 Sager | 0901210121 | Molex | Headers & Wire Housings RoHS : Compliant | 0 | ||
| 7701210121 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| R0.5D10-1212/P-R | RECOM Power GmbH | Isolated DC/DC Converters - SMD 0.5W 12V +/-12V SMD 1kV unreg |
| 0 | ||
| R0.5D10-1215-R | RECOM Power GmbH | Isolated DC/DC Converters - SMD 0.5W 12V +/-15V SMD 1kV unreg |
| 0 | ||
| R1D10-1215-R | RECOM Power GmbH | Isolated DC/DC Converters - SMD 1W DC/DC 1kV UNREG 12Vin +/-15Vout RoHS : Compliant |
| 0 | ||
0901210148 | Molex | Headers & Wire Housings CGrid SR RA Pn 675290mm TnA 28Ckt RoHS : Compliant |
| 0 | ||
| 1.30.290.121/2400 | RAFI USA Inc | Industrial Panel Mount Indicators / Switch Indicators RAFIX 30 FS+ Pushbutton illuminable |
| 0 | ||
| BA1-B0-22-480-121-C | Carling Technologies | Circuit Breakers BA1B022480121C RoHS : Compliant |
| 0 | ||
| BA1-B0-26-450-121-D | Carling Technologies | Circuit Breakers BA1B026450121D RoHS : Compliant |
| 0 | ||
| BA1-B0-34-480-121-D | Carling Technologies | Circuit Breakers BA1B034480121D RoHS : Compliant |
| 0 | ||
| BA1-B0-34-620-121-D | Carling Technologies | Circuit Breakers 1-pole, Handle, 20 amp circuit breaker, Push-On 0.250 Tab (Q.C.) terminals, UL 1077 Recognized CSA Accepted VDE Certified to IEC/EN 60934 RoHS : Compliant |
| 0 | ||
| BA1-B0-46-440-121-C | Carling Technologies | Circuit Breakers BA1B046440121C RoHS : Compliant |
| 0 | ||
| BBI160012-16.50 | ABB Group | FLEXIBLE BRAID, BBI160012 |
| 0 | ||
| B11-1-15.0A-01-21A-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 3001 00240121 | Honeywell Sensing and Control | Thermostats PRECISION THERMAL |
| 0 | ||
 Coilcraft Direct | LPS4012-152MRC | Coilcraft Inc | Power inductor, shielded, 20/30% tol, SMT, RoHS, lead-free, halogen-free RoHS : Compliant |
| 20,128 | |
| LPS4012-124MRC | Coilcraft Inc | Power inductor, shielded, 20/30% tol, SMT, RoHS, lead-free, halogen-free RoHS : Compliant |
| 7,584 | ||
| XFL4020-121MEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 3,222 | ||
| LPS4012-185MRC | Coilcraft Inc | Power inductor, shielded, 20/30% tol, SMT, RoHS, lead-free, halogen-free RoHS : Compliant |
| 1,831 | ||
| LPS4012-104MRC | Coilcraft Inc | Power inductor, shielded, 20/30% tol, SMT, RoHS, lead-free, halogen-free RoHS : Compliant |
| 1,126 | ||
| LPD4012-103MRC | Coilcraft Inc | Power inductor, dual-wound, 20/30% tol, SMT, RoHS, lead-free, halogen-free RoHS : Compliant |
| 808 | ||
| LPD4012-184MRC | Coilcraft Inc | Power inductor, dual-wound, 20/30% tol, SMT, RoHS, lead-free, halogen-free RoHS : Compliant |
| 767 | ||
| SLR1070-121KEC | Coilcraft Inc | Power inductor, shielded, 10% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 252 | ||
| RFB1010-121L | Coilcraft Inc | Power inductor, 10% tol, RoHS RoHS : Compliant |
| 158 | ||
| DC1012-124L | Coilcraft Inc | Power inductor, 10% tol, RoHS RoHS : Compliant | 66 | |||
| RFB0810-121L | Coilcraft Inc | Power inductor, 10% tol, RoHS RoHS : Compliant |
| 40 | ||
| XFL3012-104MEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 13 | ||
| DC1012-103L | Coilcraft Inc | Power inductor, 10% tol, RoHS RoHS : Compliant | 2 | |||
| XFL3012-102MEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
| XFL3012-103MED | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
 TME | 101210121 | QH Industrial | Connector: pogo pin |
| 186 | |
| 3570.1210.121 | Comus International | Relay: reed switch; Ucoil: 12VDC; SPST-NO; 500mA; max.150VDC; 10W |
| 68 | ||
| 1.15.210.121/2400 | RAFI GmbH & Co Kg | Switch: push-button; Pushbutton: round; push-in; Contacts: SPST-NO RoHS : Compliant |
| 20 | ||
| 01212 | Wiha Quality Tools | Wrench: hex key; HEX 12mm; Overall len: 259mm; nickel |
| 2 | ||
| 0012100650100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 6.5mm; L: 350mm; high speed steel; case |
| 0 | ||
| 0012101300100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 13mm; L: 480mm; high speed steel; case |
| 0 | ||
| 01211010 | Stahlwille Tools | Wrench tip; flare nut wrench,crowfoot; 1/4"; 31.9mm; alloy steel |
| 0 | ||
| 020121 | IRIMO | Wrench: ring; double-sided; 16mm,17mm; L: 170mm; steel; tag |
| 0 | ||
| 033P012-168T | Pancon Corporation | Adapter; plug; male; PIN: 12; LAT-CON127; straight; 800mA; 1.27mm |
| 0 | ||
| 10.01.06.00121 | Schmalz | Suction cup; 150mm; G1/2 F; Shore hardness: 70; 800cm3; FSGA |
| 0 | ||
| 1201210750 | Weidmüller Interface GmbH & Co. KG | 1201210750 RoHS : Compliant |
| 0 | ||
| 1201212000 | Weidmüller Interface GmbH & Co. KG | 1201212000 RoHS : Compliant |
| 0 | ||
| 122.012-12 | Pneumatic Components Limited (PCL) | Push-in fitting; straight; -0.95÷15bar; nickel plated brass |
| 0 | ||
| 126.012-14 | Pneumatic Components Limited (PCL) | Push-in fitting; angled; -0.95÷15bar; PBT; Thread: R 1/2"; 0÷60°C |
| 0 | ||
| 131.012-12 | Pneumatic Components Limited (PCL) | Push-in fitting; T-tap splitter; -0.95÷15bar; Thread: G 1/2" |
| 0 | ||
 ComSIT USA | 5450121010 | Sumida Corporation | AVAILABLE EU | 5,413 | ||
| HF3FF0121ZST257 | AVAILABLE EU | 8,695 | ||||
| XFL3012103MEC | Coilcraft Inc | AVAILABLE EU | 2,475 | |||
| SRN20121R5M | Bourns Inc | AVAILABLE EU | 16,752 | |||
ComSIT USA | CW201212R47J | Bourns Inc | General Purpose Inductor, 0.47uH, 5%, 1 Element, Ferrite-Core, SMD, 0805 RoHS : Compliant | 100,000 | ||
| YH1190121H111ST522 | ShangHai Universal | Automotive Miniature PCB Power Relay RoHS : Compliant | 18,075 | |||
| ACM20121212PT001 | TDK Corporation | COMMON MODE FILTER FOR AUTOMOBILE SIGNAL LINE Data Line Filter, 2 Function(s), 50V, 0.37A, 4 Pin(s) RoHS : Compliant | 4,000 | |||
| XFL3012102MEC | Coilcraft Inc | SHIELDED POWER INDUCTOR General Purpose Inductor, 1uH, 20%, 1 Element, Composite-Core, SMD, 1212 RoHS : Compliant | 3,855 | |||
| CV201210R47K | Bourns Inc | General Purpose Inductor, 0.47uH, 10%, 1 Element, Ferrite-Core, SMD, 0805 RoHS : Compliant | 2,000 | |||
| 92310121 | TE Connectivity | Electronic Component RoHS : Not Compliant | 1,500 | |||
| BTS50121EKB | Infineon Technologies AG | SINGLE CHANNEL, 12 MILLI OHM SMART HIGH-SIDE POWER SWITCH Buffer/Inverter Based Peripheral Driver, 10A, PDSO14 RoHS : Compliant | 1,010 | |||
| 744290121 | Wurth Elektronik | Data Line Filter, 2 Function(s), 80V, 5.5A, 10 Pin(s) RoHS : Compliant | 750 | |||
| 39012180 | Molex | CONN RCPT HSG 18POS 4.20MM RoHS : Compliant | 500 | |||
| CER0121A | CTS Corporation | 2100 MHZ W-CDMA DUPLEXER Duplexer, 2140MHz(Tx), 1950MHz(Rx) RoHS : Not Compliant | 470 | |||
| X80121Q20I | Xicor Inc | VOLTAGE SUPERVISOR/SEQUENCER DUAL PROGRAMMABLE TIME DELAY WITH LOCAL/REMOTE VOLTAGE MONITORS Power Supply Support Circuit, Adjustable, 3 Channel RoHS : Not Compliant | 122 | |||
IDT70121S25J | Integrated Device Technology Inc | HIGH-SPEED 2K X 9 DUAL-PORT STATIC RAM WITH BUSY & INTERRUPT Multi-Port SRAM, 2KX9, 25ns, CMOS, PQCC52 RoHS : Not Compliant | 72 | |||
| JQX14FF0121Z | hf | Electronic Component RoHS : Not Compliant | 8 | |||
| THN301215 | Traco Power | DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid RoHS : Not Compliant | 2 | |||
| PM2120121KRC | Bourns Inc | Electronic Component RoHS : Not Compliant | 2 | |||
 Interstate Connecting Components | 012-110-1216 | Conesys | ADAPTER, REDUCER 12 AWG TO 16AWG WIRE |
| 62 | |
| 10121506-001216BLF | Amphenol FCi | HPCE VR PF 6LP16S-10121506-001 RoHS : Unknown | 0 | |||
| 10121506-001216ALF | Amphenol FCi | HPCE VR STB 6LP16S-10121506-00 RoHS : Unknown | 0 | |||
| 10121506-001210ALF | Amphenol FCi | HPCE VR STB 6LP10S-10121506-00 RoHS : Unknown | 0 | |||
| 10121506-001214ALF | Amphenol FCi | HPCE VR STB 6LP14S-10121506-00 RoHS : Unknown | 0 | |||
| 10121505-001212BLF | Amphenol FCi | HPCE VR PF 6LP12S-10121505-001 | 0 | |||
| R33-4200-1210=MODULE B | TE Connectivity | R33-4200-1210=MODULE BLOCK S50 | 0 | |||
| 44A0121-22-2/6-MX | TE Connectivity | RoHS : Compliant |
| 0 | ||
| L17H2340121 | Amphenol Commercial | DSUB, STAMPED SIGNAL 3A, DUAL | 0 | |||
| 155675-0121 | ITT Interconnect Solutions | MKJ4C4F10-26BC | 0 | |||
| 184012-1 | TE Connectivity | 2 POS. PLUG ASSY, KEY G, GRAY RoHS : Compliant |
| 0 | ||
| 10121035-T03A150LF | Amphenol FCi | MINITEK-10121035-T03A150LF RoHS : Unknown | 0 | |||
| 10121505-002012ALF | Amphenol FCi | HPCE VR STB 10LP12S-10121505-0 | 0 | |||
| 10121505-080004BLF | Amphenol FCi | HPCE VR-2HP4S | 0 | |||
| 10121506-080012DLF | Amphenol FCi | HPCE VR PF 2HP12S-10121506-080 RoHS : Unknown | 0 | |||
 NexGen Digital | C0402C0G500-121JNE | VENKEL LTD | RoHS : Compliant | 14,292 | ||
| CCF-50-1211F | Vishay Huntington | 3,490 | ||||
BAW101,215 | Nexperia | RoHS : Compliant | 3,001 | |||
| 35F0121-0SR-10 | Qnity Laird | RoHS : Compliant | 800 | |||
| 39-01-2101 | Molex | RoHS : Compliant | 82 | |||
| 2201-2107 | Molex | 50 | ||||
| 2201-2127 | Molex | 50 | ||||
| 39-01-2100 | Molex | RoHS : Compliant | 42 | |||
| LGT0410-121K-CB | MMAG | 20 | ||||
| 69000121 | 12 | |||||
 PEI Genesis | M39012/16-0014 | Amphenol RF |
| 206 | ||
| PTS00-12-10P | Amphenol Corporation |
| 29 | |||
| EN2997RS01212BN | SOURIAU-SUNBANK | RoHS : Compliant |
| 4 | ||
| C091-31D012-100-2 | Amphenol Tuchel |
| 0 | |||
| 711-0121-01 | Amphenol Corporation |
| 0 | |||
7012-1084 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| 7012-1291 | Amphenol SV Microwave |
| 0 | |||
| 7012-1327 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| 00314400121 | Amphenol PCD |
| 0 | |||
| S3453C-67040121-06 | SOURIAU-SUNBANK |
| 0 | |||
| UT0W01210PXH6 | SOURIAU-SUNBANK |
| 0 | |||
| 7012-1324 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| 7012-1982 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
7012-1066 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
7012-1067 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
 PUI | 2012-1X03G00S/2.8/3.4/J | 14,171 | ||||
| 2012-1X07G00S/028/031/D | 7,015 | |||||
| 2012-1X04G00S/028/031/Q | 5,410 | |||||
| 2012-1X40G00S-2-2-21.1B-H | 1,714 | |||||
| 2012-1X12G00S/028/053/K | 1,396 | |||||
| 2012-1X05G00S/028/031/D | 803 | |||||
| 2012-1X40G01S/040/090/N | 250 | |||||
| 2012-1X01G00S/030/030/G | 172 | |||||
| 2012-1X02G01S/040/090/N | 102 | |||||
| 2012-1X40G00S-2.0-4.95-18 | 59 | |||||
| 2012-1X10G00S/023/070/J | 55 | |||||
| 2012-1X40G00S-1.6-2.0-18. | 31 | |||||
| 2012-1X03G00S-2.5-7.4-L | 20 | |||||
| 2012-1X40G00S/020/020/G | 18 | |||||
| 2012-1X03G00S028/068/M | 7 | |||||
 Chip 1 Exchange | BKPB002012104R7MA2 | YAGEO Corporation | INSTOCK RoHS : Compliant | 144,300 | ||
| CFR0W4J0121A50 | ROYAL | INSTOCK | 76,429 | |||
| 0603SAJ0121T5E | ROYAL | INSTOCK | 73,564 | |||
| 90120-0121 | Molex | INSTOCK RoHS : Compliant | 48,704 | |||
| 90121-0768 | Molex | INSTOCK RoHS : Compliant | 21,570 | |||
| 0201WMJ0121TEE | ROYAL | INSTOCK | 19,240 | |||
| 34729-0121 | Molex | INSTOCK RoHS : Compliant | 17,362 | |||
| HF115F-T 012-1H3B | Xiamen Hongfa Electroacoustic Co.,Ltd. | INSTOCK | 8,084 | |||
| HF115F-T/012-1H3B(335) | HONG | INSTOCK | 8,015 | |||
| QT8B0121-1011L-7F | Foxconn | INSTOCK | 7,857 | |||
| 1812W2J0121T4E | ROYAL | INSTOCK | 4,940 | |||
| 10121506-001216BLF | Amphenol Corporation | INSTOCK | 2,246 | |||
| LCB2012-102Y-N | INSTOCK | 2,181 | ||||
| 801-83-012-10-012101 | INSTOCK | 555 | ||||
| MLX 39-01-2105 | Molex | INSTOCK | 13 | |||
 Avnet Abacus | 28F0121-0SR-10 | Qnity Laird | Ferrite Bead 1612 4131 Metric 48 ohm 10 A 28F Series 750 ohm - Tape and Reel (Alt: 28F0121-0SR-10) RoHS : Compliant | 207,500 | ||
| 39012125 | Molex | Connector Housing Pull Tabs UL 94V0 MiniFit Jr 5557 Receptacle 12 Ways 42 mm (Alt: 39012125) RoHS : Compliant | 74,000 | |||
| 28F0121-1SR-10 | Qnity Laird | Ferrite Bead 3312 8530 Metric 96 ohm 10 A 28F Series 0001 ohm - Tape and Reel (Alt: 28F0121-1SR-10) RoHS : Compliant | 52,500 | |||
| 39012105 | Molex | Connector Housing Pull Tabs UL 94V0 MiniFit Jr 5557 Receptacle 10 Ways 42 mm (Alt: 39012105) RoHS : Compliant | 47,400 | |||
| 39012105 | Molex | Connector Housing Pull Tabs UL 94V0 MiniFit Jr 5557 Receptacle 10 Ways 42 mm (Alt: 39012105) RoHS : Compliant | 45,000 | |||
| CV201210-100K | Bourns Inc | Multilayer Inductor 10 H 115 ohm 24 MHz 15 mA 0805 2012 Metric CV201210 Series - Tape and Reel (Alt: CV201210-100K) RoHS : Compliant | 32,000 | |||
| 901301216 | Molex | Pin Header Vertical Signal 254 mm 2 Rows 16 Contacts Through Hole Straight (Alt: 901301216) RoHS : Compliant | 12,768 | |||
| 39012185 | Molex | Conn Wire to Board Housing Receptacle 18 POS 42mm ST Cable Mount Bag (Alt: 39012185) RoHS : Compliant | 8,800 | |||
| 39012125 | Molex | Connector Housing Pull Tabs UL 94V0 MiniFit Jr 5557 Receptacle 12 Ways 42 mm (Alt: 39012125) RoHS : Compliant | 5,213 | |||
| 432550121 | Molex | Conn Power HDR 3 POS 635mm Solder ST ThruHole 3 Terminal 1 Port Bag (Alt: 432550121) RoHS : Compliant | 4,056 | |||
| 39012106 | Molex | Conn Housing Wire to Board Housing Plug 10 POS 42mm ST Cable Mount (Alt: 39012106) RoHS : Compliant | 2,000 | |||
| 3404.0121.22 | Schurter Electronic Components | (Alt: 3404.0121.22) RoHS : Compliant | 1,500 | |||
| 901210772 | Molex | Conn Unshrouded Header HDR 12 POS 254mm Solder RA ThruHole Tray (Alt: 901210772) RoHS : Compliant | 1,013 | |||
| 39012165 | Molex | Conn Housing Wire to Board Housing Receptacle 16 POS 42mm ST Cable Mount (Alt: 39012165) RoHS : Compliant | 700 | |||
| 150-80-642-00-012101 | PRECI-DIP SSA | Conn DIP Socket SKT 42 POS 178mm Solder ST Through Hole Bulk (Alt: 150-80-642-00-012101) RoHS : Compliant | 351 | |||
Avnet Asia | BSH201,215 | Nexperia | (Alt: BSH201,215) RoHS : Compliant | 60,000 | ||
| PA4390.121HLT | Pulse Electronics Corporation | Ind Power Bead Shielded 120nH 15% 100KHz 68A T/R (Alt: PA4390.121HLT) RoHS : Compliant |
| 39,000 | ||
| PA4990.121HLT | Pulse Electronics Corporation | (Alt: PA4990.121HLT) RoHS : Compliant |
| 32,400 | ||
| BWCU00121008900M02 | Pulse Electronics Corporation | (Alt: BWCU00121008900M02) RoHS : Compliant |
| 12,000 | ||
| BWCU00201212900Y03 | Pulse Electronics Corporation | (Alt: BWCU00201212900Y03) RoHS : Compliant |
| 10,000 | ||
| BWCU00201212900M02 | Pulse Electronics Corporation | (Alt: BWCU00201212900M02) RoHS : Compliant |
| 10,000 | ||
| PA5160.121HLT | Pulse Electronics Corporation | (Alt: PA5160.121HLT) RoHS : Compliant | 9,350 | |||
| FL5000121 | Diodes Incorporated | (Alt: FL5000121) RoHS : Compliant |
| 9,000 | ||
| DFE201210U-1R5M=P2 | Murata Manufacturing Co Ltd | (Alt: DFE201210U-1R5M=P2) RoHS : Compliant |
| 9,000 | ||
| BDCD002520121R0MS1 | Pulse Electronics Corporation | Power Inductor (SMD), 1 ?H, 3.5 A, Shielded, 5 A, BDCD Series, 1008 [2520 Metric] (Alt: BDCD002520121R0MS1) RoHS : Compliant |
| 6,000 | ||
| PGL6380.121QHLT | Pulse Electronics Corporation | POWER INDUCTOR (Alt: PGL6380.121QHLT) RoHS : Compliant |
| 1,600 | ||
| 10121506-003LF | Amphenol Corporation | (Alt: 10121506-003LF) RoHS : Compliant | 1,440 | |||
| AOTA-N201210S-4R7MT | Abracon Corporation | (Alt: AOTA-N201210S-4R7MT) RoHS : Compliant | 0 | |||
| BWCU00121008900Y03 | Pulse Electronics Corporation | (Alt: BWCU00121008900Y03) RoHS : Compliant | 0 | |||
| 0039012106 | Molex | Connector Housing, Plug, 10 Contacts, 2 Rows, 4.2 mm, Panel Mount, 5559 Series, Nylon, Mini-Fit Jr. (Alt: 0039012106) RoHS : Compliant | 0 | |||
 Avnet Silica | BAS101,215 | Nexperia | (Alt: BAS101,215) RoHS : Compliant | 405,000 | ||
PSMN012-100YLX | Nexperia | (Alt: PSMN012-100YLX) RoHS : Compliant | 1,500 | |||
L2C5-MM001211E1900 | Lumileds | (Alt: L2C5-MM001211E1900) RoHS : Compliant | 400 | |||
| L2C5-FS001211E1900 | Lumileds | (Alt: L2C5-FS001211E1900) RoHS : Compliant | 350 | |||
| PMBT4401,215 | Nexperia | (Alt: PMBT4401,215) RoHS : Compliant | 0 | |||
| PXN012-100QLJ | Nexperia | Power MOSFET N Channel 100 V 50 A 12 Milliohms MLPAK33 8 Pins Surface Mount (Alt: PXN012-100QLJ) RoHS : Compliant | 0 | |||
| PAM8906M1012-13 | Diodes Incorporated | (Alt: PAM8906M1012-13) RoHS : Compliant | 0 | |||
| PSMN012-100YSFX | Nexperia | Power MOSFET N Channel 100 V 65 A 118 Milliohms LFPAK56 4 Pins Surface Mount (Alt: PSMN012-100YSFX) RoHS : Compliant | 0 | |||
| L2C5-22801216E2300 | Lumileds | (Alt: L2C5-22801216E2300) RoHS : Compliant | 0 | |||
| L2C5-40701211F1900 | Lumileds | (Alt: L2C5-40701211F1900) RoHS : Compliant | 0 | |||
| L2C5-PR001211E1900 | Lumileds | (Alt: L2C5-PR001211E1900) RoHS : Compliant | 0 | |||
| L2C5-40901216F2300 | Lumileds | (Alt: L2C5-40901216F2300) RoHS : Compliant | 0 | |||
| L2C2-30901216E2300 | Lumileds | (Alt: L2C2-30901216E2300) RoHS : Compliant | 0 | |||
| L2C2-57801211E1900 | Lumileds | (Alt: L2C2-57801211E1900) RoHS : Compliant | 0 | |||
| L2C5-30901211E1900 | Lumileds | (Alt: L2C5-30901211E1900) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AOTA-N201210S-4R7MT | Abracon Corporation |
| 0 | ||
| AOTA-N201210S-R47MT | Abracon Corporation |
| 0 | |||
| GW7101-21 | Gateworks Corporation | NXP i.MX8M Plus Industrial SBC with 64GB Flash 8GB DDR4 1 Mini PCIe 1 GB Ethernet GPS TPM |
| 0 | ||
ASPI-2012-150M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOTA-N201210S-1R0MT | Abracon Corporation |
| 0 | |||
| TMJUTGW0121102420 | Taoglas Antenna Solutions | RJ45 ICM, 1G Base-T, 1x1, Short Body, Tab Up, 10 pin THT, T+CMC, Voltage/Current Drive, Shielded EMI Finger, LED, Industrial grade |
| 0 | ||
| AISM-1210-121K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| TMJUTGW0121192420 | Taoglas Antenna Solutions | RJ45 ICM, 1G Base-T, 1x1, Short Body, Tab Down, 10 pin THT, Shielded EMI Finger, LED, Industrial grade, 30 u" gold |
| 0 | ||
AIUR-10-121K | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOTA-N201210S-3R3MT | Abracon Corporation |
| 0 | |||
| AOTA-N201210S-R24MT | Abracon Corporation |
| 0 | |||
| TMJUVHW0121102440 | Taoglas Antenna Solutions | RJ45 ICM, 10/100 Base-T, Vertical, 8 pin THT, T+CMC, Shielded, LED, Industrial grade, 30u" gold |
| 0 | ||
| RI.08.A.0121 | Taoglas Antenna Solutions | Roadmarker RI.08.A.0121 Vandal-Resistant Robust Adhesive Mount Antenna for 868MHz |
| 0 | ||
| ACMP-Q2012-161-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASPI-2012-100M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | RMC1/10-1.21K-1%-R | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 4,900 | |
| FSMD020-1210TR | Fuzetec Technology Co Ltd | IN STOCK SHIP TODAY | 3,000 | |||
| 80-0012-1450-3 | 3M | IN STOCK SHIP TODAY |
| 1,500 | ||
| RTL201012/12-1631D-32.7680MHZ | Nihon Dempa Kogyo Co Ltd | IN STOCK SHIP TODAY | 1,000 | |||
| 80-6101-2117-2 | 3M | IN STOCK SHIP TODAY |
| 511 | ||
| 47-60-121-21 | Southco | IN STOCK SHIP TODAY | 499 | |||
| 60.7012-10022 | Stäubli Electrical Connectors | IN STOCK SHIP TODAY | 323 | |||
| BFC237012104 | Vishay BCcomponents | IN STOCK SHIP TODAY RoHS : Compliant |
| 300 | ||
| 39-01-2105 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 220 | ||
| 39-01-2106 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 65 | ||
| 516-056-500-121 | EDAC Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 38 | ||
| 68301-211 | TE Connectivity | IN STOCK SHIP TODAY | 35 | |||
| M39012/17-0001 | Kings Electronics | IN STOCK SHIP TODAY | 9 | |||
| M39012/16-0014 | Kings Electronics | IN STOCK SHIP TODAY |
| 6 | ||
| M39012/17-0001 | Plessey Semiconductors Ltd | IN STOCK SHIP TODAY | 2 | |||
 DB Roberts | 47-62-301-21 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. |
| 9,595 | |
| 16M06012150B | Essentra Components |
| 1,585 | |||
| AELS10-12175-5.1 | PennEngineering (PEM) | 0 | ||||
| A001213S | PennEngineering (PEM) | 0 | ||||
| A001213S | SHEREX FASTENING SO | 0 | ||||
| 47-90-121-20 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 060121500 | Essentra Components | LATCH, CAM QTR TURN SPRING LOA | 0 | |||
| 060121536E | Essentra Components | 0 | ||||
| 02312-01212 | Avdel | AVTAINER PIN 38 SM ST NO SEAL | 0 | |||
| 47-60-121-21 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-91-101-21 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| EX901-21 | Sugatsune Kogyo Co Ltd | FLUQS CORNER ANGLE | 0 | |||
| ME-01-213-10 | Southco | Simple styling and numerous installation options make these latches extremely practical for a wide variety of entry-door applications. A series of attractive design and finish options provide appropriate accents. | 0 | |||
| 47-90-121-64 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 060121300 | Essentra Components | LATCH, CAM QTR TURN SPRING LOA | 0 | |||
 EBV Elektronik | GC15012-150D | Microchip Technology Inc | Si TVAR Non Hermetic EPSM SMT (Alt: GC15012-150D) RoHS : Not Compliant | 0 | ||
| NX30P0121UKZ | NXP Semiconductors | Power Switch 3A 12Pin WLCSP TR (Alt: NX30P0121UKZ) RoHS : Compliant | 0 | |||
| MIC2012-1PZQS | Microchip Technology Inc | (Alt: MIC2012-1PZQS) RoHS : Compliant | 0 | |||
| BTS50121EKAXUMA1 | Infineon Technologies AG | BUFFERINVERTER BASED PERIPHERAL DRIVER 10A PDSO14 (Alt: SP000768294) RoHS : Compliant | 0 | |||
BTS50121EKBXUMA1 | Infineon Technologies AG | Power Load Switch AECQ100 High Side 1 Output 135 V 50 A0012 ohm out SOIC14 (Alt: SP000865468) RoHS : Compliant | 0 | |||
| BTS70121EPAXUMA1 | Infineon Technologies AG | Power Switch High Side 85A 14Pin TSDSO TR (Alt: SP001225122) RoHS : Compliant | 0 | |||
| BTS700121ESPXUMA2 | Infineon Technologies AG | (Alt: SP005882373) RoHS : Compliant | 0 | |||
| TMJUTHW0121102420 | Taoglas Antenna Solutions | CONN JACK 1PORT 100 BASET (Alt: TMJUTHW0121102420) RoHS : Compliant | 0 | |||
| LTNPTVA120121ME3TOBO1 | Infineon Technologies AG | (Alt: SP001366332) RoHS : Not Compliant | 0 | |||
| DF8064101213700S R0W4 | Intel Corporation | (Alt: 922916) RoHS : Compliant | 0 | |||
| BTS700121ESPDAUGHBDTOBO1 | Infineon Technologies AG | BTS700121ESP DAUGHBD (Alt: SP005560795) RoHS : Compliant | 0 | |||
 ECCO | 100-0121-000 | ITT Interconnect Solutions |
| 2,629 | ||
| 97-3057-1012-1(676) | Amphenol Industrial Operations |
| 484 | |||
| 031-0560-121 | ITT Interconnect Solutions |
| 197 | |||
| 19070-0121 | Molex | RoHS : Compliant |
| 25 | ||
| 0190700121 | Molex | RoHS : Compliant |
| 25 | ||
 Flip Electronics | CY8C20121-SX1IT | Infineon Technologies AG | Stock, Ship Today |
| 2,500 | |
| CY8C20121-SX1I | Infineon Technologies AG | Stock, Ship Today |
| 1,450 | ||
 Master Electronics | BA1-B0-34-480-121-D | Carling Technologies | Circuit Breaker B-Series Hydraulic-Magnetic | Carling Technologies BA1-B0-34-480-121-D RoHS : Compliant |
| 20 | |
| 12120-1210-1211 | Molex | RoHS : Compliant |
| 8 | ||
QS10.121 | Puls Gmbh | AC-DC Power Supply - 180W - 12-15VDC - DIN Rail - Input: AC 100-240V | DC 110-150V - 60x124x117mm RoHS : Compliant |
| 2 | ||
| PT8420-0020-121-1120 | TE Connectivity | PT8420-0020-121-1120 RoHS : Compliant |
| 0 | ||
| PT9510-0200-121-1110 | TE Connectivity | PT9510-0200-121-1110 RoHS : Compliant |
| 0 | ||
| MTSW-101-21-G-D-328 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-101-21-L-S-1035 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-101-21-L-S-1080 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-101-21-T-D-1210-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1.30.290.121/2400 | RAFI GmbH & Co Kg | CONFIG SW BODY PUSHBUTTON ILLUM RoHS : Compliant |
| 0 | ||
| BA1-B0-22-480-121-C | Carling Technologies | B-Series single-pole hydraulic-magnetic circuit breaker with handle actuator 8A current rating and UL/CSA approval. RoHS : Compliant |
| 0 | ||
| BA1-B0-26-450-121-D | Carling Technologies | Single-pole hydraulic-magnetic circuit breaker with handle actuator AC long time delay 5A current rating and snap-in panel mounting. RoHS : Compliant |
| 0 | ||
| BA1-B0-34-620-121-D | Carling Technologies | Circuit Breaker Hydraulic Magnetic 1Pole 20A 250VAC/80VDC RoHS : Compliant |
| 0 | ||
| BA1-B0-46-440-121-C | Carling Technologies | Hydraulic-magnetic circuit breaker with handle actuator single pole AC long delay with high-inrush 4.0A current rating and UL/CSA certification. RoHS : Compliant |
| 0 | ||
| BBI160012-16.50 | Thomas & Betts | FLEXIBLE BRAID BBI160012 RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C0121/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to N Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly SMA male to N male low loss cable 36 inch length using LMR-195 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 36 inch length using LMR-195 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0121/HS-36 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C0121/HS-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121/HS-36 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 36 inch length using LMR-195 coax with Times Microwave components with heatshrink. |
| 1,923 | |
| PE3C0121/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to N Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly SMA male to N male low loss cable 60 inch length using LMR-195 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 60 inch length using LMR-195 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0121/HS-60 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3C0121/HS-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121/HS-60 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 60 inch length using LMR-195 coax with Times Microwave components with heatshrink. |
| 1,154 | ||
| PE3C0121LF-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to N Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Times Microwave Components, LF Solder., Radio frequency assembly SMA male to N male low loss cable 60 inch length using LMR-195 coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 60 inch length using LMR-195 coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0121LF-60 can also be known as a low loss SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C0121LF-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121LF-60 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 60 inch length using LMR-195 coax with Times Microwave components, LF solder. |
| 1,154 | ||
| PE3W02012-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Female 4 Hole Flange Low Loss Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly N male to N female 4 hole flange low loss cable 12 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N female 4 hole flange low loss cable 12 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N 4 hole flange cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3W02012-12, can also be known as a low loss type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3W02012-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N male to type N female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02012-12 can also be used in the other direction and will be N type female 4 hole flange to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to N type jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female 4 hole flange low loss cable 12 inch length using LMR-195 coax. |
| 765 | ||
| PE3C0121/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to N Male (Plug) Low Loss Cable 48 Inch Length Using LMR-195 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to N male (plug) low loss cable 48 inch length using LMR-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our low loss SMA to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0121/WP-48 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0121/WP-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMA male to type N male cable has a maximum VSWR of 1.4:1. SMA plug to type N plug cable assembly PE3C0121/WP-48 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0121/WP-48 can also be used in the other direction and will be a type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 340 | ||
| PE3C0121/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 SMA Male (Plug) to N Male (Plug) Low Loss Cable 36 Inch Length Using LMR-195 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to N male (plug) low loss cable 36 inch length using LMR-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our low loss SMA to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0121/WP-36 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0121/WP-36 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMA male to type N male cable has a maximum VSWR of 1.4:1. SMA plug to type N plug cable assembly PE3C0121/WP-36 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0121/WP-36 can also be used in the other direction and will be a type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 340 | ||
| PE3FCA012-1M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC UPC to LC UPC, MM OM3, 2.0mm LSZH, Aqua - 1 meter. Pasternack’s PE3FCA012-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long patch cable assembly is equipped with simplex LC/UPC to LC/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This multimode OM3 patch cable assembly is optimized for high-speed, high-bandwidth data transfer, supporting faster and longer-distance connectivity than OM1 fiber. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA012-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 336 | ||
| PE3M0121-30 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 30 inches. MIL-DTL-17 SMA Male Right Angle to SMA Male Right Angle Cable 30 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male right angle to SMA male right angle cable 30 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male right angle to SMA male right angle cable 30 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/56-3129 SMA to M39012/56-3129 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle M39012/56-3129 SMA cable connection on one end and right angle M39012/56-3129 SMA cable connection on the other. Our right angle M39012/56-3129 SMA to right angle M39012/56-3129 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/56-3129 SMA to M39012/56-3129 SMA cable is a male to male coax assembly, PE3M0121-30, can also be known as a MIL-DTL-17/MIL-C-17 right angle M39012/56-3129 SMA plug to right angle M39012/56-3129 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/56-3129 SMA plug to M39012/56-3129 SMA plug cable assembly PE3M0121-30 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/56-3129 SMA cable assembly is manufactured with right angle M39012/56-3129 SMA to right angle M39012/56-3129 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/56-3129 SMA right angle male to M39012/56-3129 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/56-3129 SMA right angle plug to M39012/56-3129 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/56-3129 SMA to M39012/56-3129 SMA cable assembly for quick shipment worldwide. Variations of M39012/56-3129 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male right angle to SMA male right angle cable 30 inch length using M17/28-RG58 coax. |
| 24 | ||
| PE3W01218 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. N Female Bulkhead to MMCX Plug Right Angle Cable Using PE-C100-LSZH Coax. PE3W01218 is a N female bulkhead to MMCX plug right angle cable using PE-C100-LSZH coax. This Pasternack N female bulkhead to MMCX plug right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm MMCX for connector 2. N to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to plug MMCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01218 N female bulkhead to MMCX plug right angle cable assembly is constructed with PE-C100-LSZH coax. | 0 | |||
| PE3W01211-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to MMCX Jack Low Loss Cable 200 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male to MMCX jack low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MMCX jack low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a MMCX cable connection on the other. Our low loss a SMA to a MMCX cable assembly has male gender on end 1 and jack on end 2. PE3W01211-200CM can also be known as a low loss SMA plug to MMCX female cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01211-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to MMCX female cable assembly PE3W01211-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01211-200CM can also be used in the other direction and will be MMCX jack to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PEWAT1012-10 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-10, Attenuation, Typical: 10 dB, Flange Size: UG-387/U-Mod, VSWR: 1.15:1, Minimum Frequency: 75 GHz, Maximum Frequency: 110 GHz, Maximum Power: 1 W. WR-10 Waveguide Fixed Attenuator, 10 dB, from 75 GHz to 110 GHz, UG-387/U-Mod Round Cover Flange, 1W Power., WR-10 Pasternack waveguide fixed attenuator PEWAT1012-10 is in stock at our ISO 9001:2008 certified facilities that ship same-day internationally. Pasternack WR-10 gold-plated waveguide attenuators function up to 110 GHz maximum frequency rating. This 75 GHz to 110 GHz fixed waveguide attenuator PEWAT1012-10 has round cover gold-plated flanges and is in stock continuously. Waveguide fixed attenuator WR-10 with aluminum round cover flanges from Pasternack has a high-quality rating of 10 dB attenuation accuracy. Pasternack has been supplying waveguide components like these 75 GHz to 110 GHz 10 dB aluminum fixed attenuators since it started business in 1972. Off-the-shelf online or by phone, we ship these industry-leading round cover UG-387/U-Mod gold plated flanged WR-10 waveguide fixed attenuators around the globe. PEWAT1012-10 medium power waveguide fixed attenuator at 110 GHz max frequency and 75 GHz minimum frequency is able to achieve amazing RF performance with 1 watts of peak input power. These 1W WR-10 waveguide attenuators at 10 dB fixed attenuation by Pasternack have a typical 1.15:1 VSWR (voltage standing wave ratio). WR-10 waveguide gold plated fixed attenuator that operates in the 75 GHz to 110 GHz range is 0.1 inches in width. 0.1 inch wide 1W aluminum waveguide attenuator fixed from Pasternack has a length of 2 inches. Satellite, RADAR, and wireless communications systems utilize 110 GHz 0.1 by 2-inch gold-plated waveguide 10 dB attenuators that have round cover UG-387/U-Mod flanges. Precise CAD drawings are accessible for these WR-10 10 dB PEWAT1012-10 waveguides with specifications and dimensions on our PDF datasheet download. For any issues with our 1W 0.1 inch wide fixed attenuators that use round cover aluminum flanges, Pasternack tech support experts are always at your disposal. Let Pasternack and our knowledgeable sales team be your first and last stop to purchase top-shelf waveguide components like this 1 watt 10 dB attenuation WR-10 fixed attenuator at 75 GHz to 110 GHz. |
| 0 | ||
| PE3W01211 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to MMCX Jack Low Loss Cable Using LMR-100 Coax., Radio frequency assembly SMA male to MMCX jack low loss cable using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MMCX jack low loss cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a MMCX cable connection on the other. Our low loss a SMA to a MMCX cable assembly has male gender on end 1 and jack on end 2. PE3W01211 can also be known as a low loss SMA plug to MMCX female cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01211 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to MMCX female cable assembly PE3W01211 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01211 can also be used in the other direction and will be MMCX jack to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W10121 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. White FAKRA Jack to SMA Female Cable Using LMR-100 Coax. PE3W10121 is a FAKRA jack to SMA female cable using LMR-100A coax. This Pasternack FAKRA jack to SMA female cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMA for connector 2. Our jack FAKRA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10121 FAKRA jack to SMA female cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W01211-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to MMCX Jack Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to MMCX jack low loss cable 24 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MMCX jack low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a MMCX cable connection on the other. Our low loss a SMA to a MMCX cable assembly has male gender on end 1 and jack on end 2. PE3W01211-24 can also be known as a low loss SMA plug to MMCX female cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01211-24 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to MMCX female cable assembly PE3W01211-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01211-24 can also be used in the other direction and will be MMCX jack to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01214 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-400-UF Coax. PE3W01214 is a TNC male to TNC male cable using LMR-400-UF coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01214 TNC male to TNC male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 Venkel Ltd. | C1111HQN500-121GNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;50V;120pF;�2% RoHS : Compliant | 0 | ||
| C0402C0G500-121JNE | VENKEL LTD | Chip Capacitor;0402;C0G;50V;120pF;�5% RoHS : Compliant | 0 | |||
C0805X7R500-121KNP | VENKEL LTD | Chip Capacitor;0805;X7R;50V;120pF;�10% RoHS : Compliant | 0 | |||
| MLF2012-1R5KT | VENKEL LTD | Multilayer Chip Inductor;0805;1.5uH;�10% RoHS : Compliant | 0 | |||
| SMPI404012-150NU | VENKEL LTD | Square Miniature Power Inductor;404012;15uH;�30% RoHS : Compliant | 0 | |||
| C0402C0G500-121JNP | VENKEL LTD | Chip Capacitor;0402;C0G;50V;120pF;�5% RoHS : Compliant | 0 | |||
| C0402C0G500-121KNE | VENKEL LTD | Chip Capacitor;0402;C0G;50V;120pF;�10% RoHS : Compliant | 0 | |||
| C0603HQN250-121GNP | VENKEL LTD | High-Q NP0 Capacitor;0603;HQN;25V;120pF;�2% RoHS : Compliant | 0 | |||
| C0201X7R500-121KNP | VENKEL LTD | Chip Capacitor;0201;X7R;50V;120pF;�10% RoHS : Compliant | 0 | |||
| AGC0402C0G500-121GNP | VENKEL LTD | Auto Grade Capacitor;0402;C0G;50V;120pF;�2% RoHS : Compliant | 0 | |||
| MLF2012-180KT | VENKEL LTD | Multilayer Chip Inductor;0805;18uH;�10% RoHS : Compliant | 0 | |||
| MLF2012-1R2MT | VENKEL LTD | Multilayer Chip Inductor;0805;1.2uH;�20% RoHS : Compliant | 0 | |||
| C0805C0G250-121KNP | VENKEL LTD | Chip Capacitor;0805;C0G;25V;120pF;�10% RoHS : Compliant | 0 | |||
C1206C0G500-121GNP | VENKEL LTD | Chip Capacitor;1206;C0G;50V;120pF;�2% RoHS : Compliant | 0 | |||
| SMPI303012-150NT | VENKEL LTD | Square Miniature Power Inductor;303012;15uH;�30% RoHS : Compliant | 0 | |||
 Vyrian | 74990101210 | Wurth Elektronik | Telecom and Datacom Connector, 8 Contact(s), Female, Straight, Solder Terminal | 18,523 | ||
| RFLPF2012100Y0T | Walsin Technology | Low Pass Filter, 1 Section(s) Min, 1 Section(s) Max, 500MHz, 4 Pin(s) | 18,142 | |||
| DS2401218000G | Amphenol Corporation | Barrier Strip Terminal Block, 10A, 1.31mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 16,556 | |||
| 6000-121K-RC | Bourns Inc | General Purpose Inductor, 120uH, 10%, 1 Element, Ferrite-Core RoHS : Compliant | 14,480 | |||
PMBT5401,215 | NXP Semiconductors | Small Signal Bipolar Transistor, 0.3A I(C), 150V V(BR)CEO, 1-Element, PNP, Silicon, TO-236AB RoHS : Compliant | 12,887 | |||
5962-01-212-1141 | Analog Devices Inc | Operational Amplifier, 2 Func, 1000uV Offset-Max, MBCY8 RoHS : Not Compliant | 10,937 | |||
| PTKM100-121H | Api Delevan | General Purpose Inductor, 100uH, 10%, 1 Element, Ferrous Alloy-Core | 9,967 | |||
| 55A0121-22-0/2 | TE Connectivity | Wire And Cable, 2 Conductor(s), 22AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 9,689 | |||
| W1211-601211/BCM98910X_EVK_C | Broadcom Limited | 9,386 | ||||
HPA01215RHAR | Texas Instruments | Microprocessor Circuit, CMOS, PQCC40 RoHS : Compliant | 6,603 | |||
| 44A0121-20-0/9-MX | TE Connectivity | Wire And Cable, 2 Conductor(s), 20AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 6,579 | |||
| 5962-01-218-0281 | Texas Instruments | Page Mode DRAM, 64KX1, 200ns, MOS, CDIP16 RoHS : Not Compliant | 5,443 | |||
| 5962-01-218-8481 | Texas Instruments | OTP ROM, 512X8, 75ns, TTL, CDIP20 RoHS : Not Compliant | 4,899 | |||
MT52C9012-15 | Micron Technology Inc | FIFO, 1KX9, 15ns, Asynchronous, CMOS, PDIP28 RoHS : Not Compliant | 3,741 | |||
| BPCI00121280681K00 | Pulse Electronics Corporation | General Purpose Inductor, 680uH, 10%, 1 Element, SMD, 4747 RoHS : Compliant | 191 | |||
 Waytek, Inc. | 19070-0121 | Molex | 12-10 GA #8 Ring Terminal Yellow Insulated Vinyl RoHS : Compliant |
| 4,006 | |
| 39012100 | Molex | 10 Pin Receptacle Mini-Fit JR MOLEX PN 39012100 RoHS : Compliant |
| 448 | ||
| 99-0121 | Trombetta | J1939 8 Place Splitter (2)12 Pin DT Connector Cavity |
| 110 | ||
| 680-12180559 | Rennsteig Tools Inc | Removal Tool Metri-Pack 150 & 280 PULL TO SEAT 12180559 DUCON GT 150 J-38125-559 |
| 15 | ||
 Win Source Electronics | ACM2012-121-2P-T002 | TDK Corporation | CMC 370MA 2LN 120 OHM SMD RoHS : Compliant |
| 120,560 | |
| NX30P0121UKZ | Nexperia | IC PWR SWITCH N-CHAN 1:1 12WLCSP / Power Switch/Driver 1:1 N-Channel 3A 12-WLCSP (1.65x1.25) |
| 114,100 | ||
| NX30P0121UKAZ | Nexperia | Power Switch/Driver 1:1 N-Channel 3A 12-WLCSP (1.65x1.25) |
| 112,480 | ||
RFBPF2012100KST | Walsin Technology Corporation | RF FILTER BAND PASS 5.4GHZ 0603 RoHS : Compliant |
| 80,913 | ||
| DFE201210U-2R2M=P2 | Murata Manufacturing Co Ltd | FIXED IND 2.2UH 1.2A 228MOHM SMD RoHS : Compliant |
| 60,000 | ||
| HF3FF/012-1ZST | Xiamen Hongfa Electroacoustic Co.,Ltd. | 12V Through Hole,19x15.2mm Power Relays RoHS RoHS : Compliant |
| 50,000 | ||
| HFD23/012-1ZS | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay HFD23/012-1ZS, 2A, coil voltage 12V DC, changeover contact (1C), coil power: 150mW, 1A/30V DC, 0.5A/125VAC RoHS : Compliant |
| 40,000 | ||
| HFKW/012-1ZW | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay HFKW/012-1ZW, 35A, coil voltage 12 VDC, changeoveer contact (1C), coil power 600mW, 20A/12VDC |
| 40,000 | ||
| DFE201210U-R47M=P2 | Murata Manufacturing Co Ltd | FIXED IND 470NH 3A 42 MOHM SMD RoHS : Compliant |
| 30,000 | ||
| PSMN012-100YS | Nexperia | N-channel 100V 12mΩ standard level MOSFET in LFPAK RoHS : Compliant |
| 12,398 | ||
| 28F0121-0SR-10 | Qnity Laird | FERRITE BEAD 48 OHM 2SMD 1LN RoHS : Compliant |
| 5,685 | ||
| 28F0121-1SR-10 | Qnity Laird | FERRITE BEAD 96 OHM 2SMD 1LN RoHS : Compliant |
| 5,050 | ||
| 0039012105 | Molex | CONN RCPT HSG 10POS 4.20MM / 10 Rectangular Connectors - Housings Receptacle Natural 0.165" (4.20mm) RoHS : Compliant |
| 3,580 | ||
| FSMD020-1210-R | Fuzetec Technology Co Ltd | PPTC Resettable Fuse 30V .2A Hol RoHS : Compliant |
| 2,930 | ||
LPTM10-12107-3FTG208I | Lattice Semiconductor Corporation | IC PLATFORM MANAGER 208FTGBA RoHS : Compliant |
| 577 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand