 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
034B4-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 Avnet Asia | 5034800800 | Molex | FFC / FPC Board Connector, 8 Contacts, 1 Row, 0.5mm, Top, Bottom, Gold, PCB Mount, Straight, 0.3mm (Alt: 5034800800) RoHS : Compliant | 12,000 | ||
| PM2180.034NLT | Pulse Electronics Corporation | Power Transformer 3CT:4CT Dual Prim. Dual Sec. SMD T/R (Alt: PM2180.034NLT) RoHS : Compliant |
| 10,500 | ||
| 0346910120 | Molex | Pin Header, 12 Contacts, 2 Rows, 2.54 mm, Tin, Brass, PCB Header, Right Angle, Stac64 34691 Series (Alt: 0346910120) RoHS : Compliant | 7,840 | |||
| PA5003.471NLT | Pulse Electronics Corporation | (Alt: PA5003.471NLT) RoHS : Compliant | 6,000 | |||
| 0347730140 | Molex | PCB Receptacle, PCB Header, 14 Contacts, 2 Rows, Tin, Copper Alloy, Through Hole Mount, Right Angle (Alt: 0347730140) RoHS : Compliant | 5,600 | |||
| 861400342YO7811LF | Amphenol Corporation | Unshrouded Connector Header 34 Position Solder (Alt: 861400342YO7811LF) RoHS : Compliant | 4,000 | |||
| 0347720141 | Molex | Pin Header, 14 Contacts, 2 Rows, Tin, Copper Alloy, PCB Header, Straight, Stac64 34772 Series (Alt: 0347720141) RoHS : Compliant | 2,240 | |||
| HCM0503-4R7-R | Eaton Corporation | (Alt: HCM0503-4R7-R) RoHS : Compliant |
| 2,000 | ||
| PH9085.034NLT | Pulse Electronics Corporation | Power Transformer 3CT:4CT Single Single Sec. Surface Mount (Alt: PH9085.034NLT) RoHS : Compliant |
| 700 | ||
| 380-3424-20W | Amphenol Corporation | Conn Stacking Receptacle 90 POS 18.5mm Stack Height 1.15mm Solder Ball ST SMD Tray (Alt: 380-3424-20W) RoHS : Compliant |
| 350 | ||
| 2034560003 | Molex | Mezzanine Connector, Hermaphroditic, 699 Contacts, 11 Rows, Gold, SMT, Straight, Solder (Alt: 2034560003) RoHS : Compliant | 300 | |||
| 0349580341 | Molex | Pin Header, 34 Contacts, 3 Rows, 2 mm, Tin, Brass, PCB Header, Straight, Mini50 34958 Series, SPS (Alt: 0349580341) RoHS : Compliant | 130 | |||
| AR0341ATSC15XUEA0-DPBR-E | onsemi | ONSAR0341ATSC15XUEA0-DPBR-E 3?MP?1/4?CIS (Alt: AR0341ATSC15XUEA0-DPBR-E) RoHS : Compliant |
| 5 | ||
| MARS1-AR0341ATSC-GEVB | onsemi | (Alt: MARS1-AR0341ATSC-GEVB) RoHS : Compliant | 4 | |||
| MARS1-AR0341AT2C-GEVB | onsemi | MARS AR0341AT RGB MIPI HB (Alt: MARS1-AR0341AT2C-GEVB) RoHS : Compliant | 2 | |||
 Braemac Americas-Symmetry | AIMC-Q0603-4N7S-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AISC-Q0603-43NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMA65AR5L-190342Y | Aimtec |
| 0 | |||
| ARJE-1034 | Abracon Corporation | SMD 1PORT 10GBASE-T W/MAGNETICS RoHS : Compliant |
| 0 | ||
ASMCI-0603-4R7M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMA65AR4L-190342Y | Aimtec |
| 0 | |||
| AMA65UK1-190342Y | Aimtec |
| 0 | |||
| AFBC-Q0603-471-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AIRD-03-472K | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q0603-47NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMA65DR4-190034Y | Aimtec |
| 0 | |||
| AMA65UR5L-190342Y | Aimtec |
| 0 | |||
| FXUB66.01.0345C | Taoglas Antenna Solutions | Maximus FXUB66 600-6000MHz Flexible PCB P&S Antenna, 345mm 1.37 Micro Coax SMA (M) |
| 0 | ||
| AANE-WH-0034-1 | Abracon Corporation |
| 0 | |||
| AISC-Q0603-4N7K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | RMC1/10-348R-1% | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 12,400 | |
| 503480-0600 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 6,793 | ||
| MMA0204-25-0.1%-B0-34K8 | Vishay Beyschlag | IN STOCK SHIP TODAY | 5,820 | |||
| CRCW0603470RFKEA | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,660 | ||
| 3600-34 | Suyin Group | IN STOCK SHIP TODAY |
| 619 | ||
| 26-03-4020 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 465 | ||
| 57003402 | Southwire Company LLC | IN STOCK SHIP TODAY |
| 201 | ||
| CDBQR00340 | Comchip Technology Corporation Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 150 | ||
| 4403-4X51S | Regal Rexnord Corporation | IN STOCK SHIP TODAY |
| 150 | ||
| ACCPOTECB303430230 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 47 | ||
| 103-40034 | ept Connectors | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| B39202-B9034-E210-S09 | TDK Electronics | IN STOCK SHIP TODAY |
| 20 | ||
| IT034 | FDK Corporation | IN STOCK SHIP TODAY | 9 | |||
| LMH0340SQE | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 7 | ||
| 26-03-4101 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 5 | ||
 DB Roberts | 4503-440-AL | RAF Electronic Hardware | STANDARD ALUMINUM MALE FEMALE STANDOFF |
| 3,926 | |
| PK-0-34323-01 | Southco | 0 | ||||
| 20034078 | Essentra Components | 0 | ||||
| 20034528 | Essentra Components | 0 | ||||
| 47-60-341-61 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| AC-30-342-11 | Southco | AC-30-342-11 | 0 | |||
| H3-50-340-044 | Southco | The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use. | 0 | |||
| M1303-4007-S-12 | RAF Electronic Hardware | 0 | ||||
| R903-4 | Essentra Components | SpacerRoundNatural1/4 in Spc Spacer Round Natural | 0 | |||
| RFL300-3/4A | Essentra Components | FLANGE PROTECTION DISCHDPE BLA | 0 | |||
| 550341 | Essentra Components | 0 | ||||
| 010348H037B | Essentra Components | 348 X 38 HEX HEAD MS BLK M111 | 0 | |||
| 4003-440-A-21 | RAF Electronic Hardware | 0 | ||||
| MM-03-432-14-10 | Southco | 0 | ||||
| PNT1000-34 | Pop Rivets | HUHL TUBE | 0 | |||
 FDH Electronics | LF-103A103-4M | ELECTRO ENTERPRISES INC | Data Bus |
| 679 | |
| LF5003-4 | ELECTRO ENTERPRISES INC | Data Bus |
| 20 | ||
| SE90A37W4.0-34 | SOURIAU-SUNBANK | Backshells & Ac | 9 | |||
| SE9F1512A2.0-34R | SOURIAU-SUNBANK | Backshells & Ac | 8 | |||
| DM130340 | ITT Interconnect Solutions | Connector Acc RoHS : Compliant |
| 5 | ||
| S1693-1510-34-12 | SOURIAU-SUNBANK | Backshells & Ac | 4 | |||
| RNF-100-3/4-CL-STK | TE Connectivity | Heat Shrink Prd RoHS : Compliant |
| 4 | ||
| SE9FM6908A2.0-34R | SOURIAU-SUNBANK | Backshells & Ac | 0 | |||
| M39016/23-034L | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| S3291FM7010-34 | SOURIAU-SUNBANK | Backshells & Ac | 0 | |||
| CTJ-3A-03-4021 | TE Connectivity | Mounting Track | 0 | |||
| 103-4-G-W21 | HellermannTyton | Harness Mgmt | 0 | |||
| 034-11006-NA | Amphenol RF | Connector | 0 | |||
| M85049/144-14W03-4 | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/144S44Z03-4 | Amphenol PCD | Backshells & Ac | 0 | |||
 Maritex | RCA034K7FLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA034K7FLF; HKR |
| 1,040,128 | |
| RCA0347RFLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA0347RFLF; HKR |
| 166,900 | ||
| RCA034M7JLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA034M7JLF; HKR |
| 150,000 | ||
| RCA0347KFLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA0347KFLF; HKR |
| 103,336 | ||
| RCA034K3FLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA034K3FLF; HKR |
| 37,200 | ||
| RCA0343KFLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA0343KFLF; HKR |
| 9,500 | ||
| MFC0603/472J3200350T | Cyg Wayon Circuit Protection Co Ltd | Thermistor NTC; 4.7kOhm; 5%; B=3350 |
| 3,910 | ||
| 0034.1519 | Schurter Electronic Components | Cartridge fuse; glass; quick-acting F; 2A; 250V AC; 5�20mm; -55+125 deg.C RoHS : Compliant |
| 2,000 | ||
| 0034.3127 | Schurter Electronic Components | Cartridge fuse; glass; time-lag T; 10A; 250V AC; 5�20mm; -55+125 deg.C RoHS : Compliant |
| 1,999 | ||
| 0034.3108 | Schurter Electronic Components | Cartridge fuse; glass; time-lag T; 125mA; 250V AC; 5�20mm; -55+125 deg.C RoHS : Compliant |
| 1,000 | ||
| 0034.6620 | Schurter Electronic Components | THT fuse; subminiature; time-lag T; 3.15A; 250V AC/63V DC; 8.5�4.3�8.5mm; -55+125 deg.C RoHS : Compliant |
| 1,000 | ||
| 0034.3112 | Schurter Electronic Components | Cartridge fuse; glass; time-lag T; 315mA; 250V AC; 5�20mm; -55+125 deg.C RoHS : Compliant |
| 960 | ||
| 72309-8034BLF | Amphenol Corporation | USB/DVI/HDMI Connectors; 72309-8034BLF; AMPHENOL; Receptacle; Gold; 8; Right Angle |
| 154 | ||
| CLEDDYST190340 | LEDCONN | Spacer for LEDs dimensions 1.9mm x 3.4mm; height 1.5mm |
| 100 | ||
| AN1603-433 | RainSun Group | Antenna; Chip; ISM; 433MHz; 0.5dBi; VSWR<2.0; linear; SMD; 16x3.1x1.65mm |
| 90 | ||
 Pasternack Enterprises US | PEANRBD1034 | Pasternack Enterprises | Key Specifications. Antenna Type Rubber Duck Polarization Vertical Minimum Frequency 136 MHz Maximum Frequency 174 MHz Connector 1 Polarity Standard Connector Series BNC Connector Gender Male Impedance 50 Ohm Maximum Input VSWR 1.5:1. 136-174 MHz Telescopic Antenna, 2 dBi gain, BNC Male Connector, Vertical Polarization. Vertical polarized antenna PEANRBD1034 from Pasternack is part of our extensive in-stock omni directional antennas that ship the same day from our ISO 9001:2015 certified facility. The antenna with 136 to 174 MHz frequency range has a maximum input VSWR of 1.5:1. This omni directional antenna has BNC male connector, This antenna has a black radome, an overall length of 7.87 in, width of 0.50 in, and weighs 0.33 lbs. Pasternack’s PEANRBD1034 is a single band antenna operating from 136 to 174 MHz with 2 dBi gain, Pasternack's experts are on hand to assist you with any inquiries. Order this PEANRBD1034 antenna 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping,. |
| 35 | |
| PE3W03496-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 10-32 Female to BNC Male Cable 150 CM Length Using RG178 Coax., Radio frequency assembly 10-32 female to BNC male cable 150 cm length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 10-32 female to BNC male cable 150 cm length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 10-32 cable connection on one end and BNC cable connection on the other. Our 10-32 to BNC cable assemblies have a female gender on end 1 and male on end 2. This 10-32 to BNC cable is a female to male coax assembly, PE3W03496-150CM, can also be known as a 10-32 jack to BNC plug cable assembly and will be shipped same-day as it is purchased. 10-32 jack to BNC plug cable assembly PE3W03496-150CM is built with RG178 which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency 10-32 female to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03496-150CM can also be used in the other direction and will be BNC male to 10-32 female cable assembly if the opposite connectivity is required. 10-32 jack to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 female to BNC male cable 150 cm length using RG178 coax. |
| 14 | ||
| PE3W03496-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. 10-32 Female to BNC Male Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly 10-32 female to BNC male cable 24 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 10-32 female to BNC male cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 10-32 cable connection on one end and BNC cable connection on the other. Our 10-32 to BNC cable assemblies have a female gender on end 1 and male on end 2. This 10-32 to BNC cable is a female to male coax assembly, PE3W03496-24, can also be known as a 10-32 jack to BNC plug cable assembly and will be shipped same-day as it is purchased. 10-32 jack to BNC plug cable assembly PE3W03496-24 is built with RG178 which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency 10-32 female to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03496-24 can also be used in the other direction and will be BNC male to 10-32 female cable assembly if the opposite connectivity is required. 10-32 jack to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 female to BNC male cable 24 inch length using RG178 coax. |
| 14 | ||
| PE3M0345-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Socket to SMA Female Cable 48 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0345-48 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ socket contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0345-48 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ socket to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0345-48 in-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMZ socket to SMA female cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0345-48 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ socket to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements. |
| 9 | ||
| PE3M0347-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Socket to SMA Female Cable 6 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0347-6 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ socket contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ socket to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0347-6 between-series RF cable has 0.78 inches of repeated minimum bend radius. BMZ socket to SMA female cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0347-6 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ socket to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements. |
| 8 | ||
| PE7403-4 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 65 GHz, Impedance: 50 Ohm, Power Maximum: 1 Watt, VSWR Maximum: 1.65:1, Attenuation: 4 dB, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Series 2: 1.85mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 4 dB Fixed Attenuator, 1.85mm Male to 1.85mm Female Passivated Stainless Steel Body Rated to 1 Watt Up to 65 GHz. PE7403-4 is a fixed 4 dB attenuator from Pasternack. This 4dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 1.85mm attenuator has a male gender on side 1 and a 1.85mm female connector on side 2. The Pasternack PE7403-4 4 dB attenuator is rated for up to 65 GHz. Our microwave attenuator is rated to 1 Watts at the stated attenuation value. Our fixed RF attenuator PE7403-4 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 4dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 5 | ||
| PE3VNA1803-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-VNA-R, RF Cable Type: PE-VNA-R, RF Cable Impedance: 50 Ohm, Length: 48 inches. VNA Ruggedized Test Cable N Male to N Male 18GHz 48 Inch Length, RoHS., Radio frequency assembly VNA ruggedized test cable N male to N male 18GHz 48 inch length, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. VNA ruggedized test cable N male to N male 18GHz 48 inch length, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax test cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our test N type to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3VNA1803-48, can also be known as a test N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3VNA1803-48 is built with PE-VNA-R which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Test type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this VNA ruggedized test cable N male to N male 18GHz 48 inch length, RoHS. |
| 3 | ||
| PE3W03428 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Plug Right Angle to Reverse Polarity SMA Plug Right Angle Low Loss Cable Using LMR-100 Coax., Radio frequency assembly reverse polarity SMA plug right angle to reverse polarity SMA plug right angle low loss cable using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug right angle to reverse polarity SMA plug right angle low loss cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle reverse polarity SMA cable connection on one end and right angle reverse polarity SMA cable connection on the other. Our low loss right angle reverse polarity SMA to right angle reverse polarity SMA cable assemblies have a plug gender on end 1 and plug on end 2. PE3W03428 can also be known as a low loss right angle reverse polarity SMA male to right angle reverse polarity SMA male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to reverse polarity SMA male cable assembly PE3W03428 is built with LMR-100A which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA right angle plug to reverse polarity SMA right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA reverse polarity right angle male to SMA reverse polarity right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug right angle to reverse polarity SMA plug right angle low loss cable using LMR-100 coax. | 0 | |||
| PE3W03437/HS | Pasternack Enterprises | 0 | ||||
| PE3W03446/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SSMA Male to SMA Male Cable 72 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SSMA male to SMA male cable 72 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA male to SMA male cable 72 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a SSMA cable connection on one end and a SMA cable connection on the other. Our a SSMA to a SMA cable assembly has male gender on end 1 and male on end 2. PE3W03446/HS-72 can also be known as a SSMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W03446/HS-72 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. SSMA plug to SMA plug cable assembly PE3W03446/HS-72 is built with RG316 which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to SMA cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W03446/HS-72 can also be used in the other direction and will be SMA male to SSMA male cable assembly if the opposite connectivity is required. SSMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SMA cable assembly for quick shipment worldwide. Variations of SSMA and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W03473 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Right Angle Cable Using PE-SR402FL Coax. PE3W03473 is a SMA male right angle to SMA male right angle cable using PE-SR402FL coax. This Pasternack SMA male right angle to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W03473 SMA male right angle to SMA male right angle cable assembly is constructed with PE-SR402FL coax. | 0 | |||
| PE3W10349 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to SMA Female Cable Using RG316-DS Coax. PE3W10349 is a BMA plug bulkhead to SMA female cable using RG316-DS coax. This Pasternack BMA plug bulkhead to SMA female cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SMA for connector 2. Our plug BMA bulkhead to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10349 BMA plug bulkhead to SMA female cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3W19034 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. BNC Female to Reverse Polarity TNC Male Cable Using LMR-240-UF Coax. PE3W19034 is a BNC female to reverse polarity TNC male cable using LMR-240-UF coax. This Pasternack BNC female to reverse polarity TNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm TNC for connector 2. Our female BNC to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19034 BNC female to TNC reverse polarity male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE7034-4 | Pasternack Enterprises | Key Specifications, Design: Step, Maximum Frequency: 2 GHz, Impedance: 50 Ohm, Power Maximum: 1 Watt, VSWR Maximum: 1.4:1, Connector Series 1: BNC, Connector Gender 1: Female, Connector Series 2: BNC, Connector Gender 2: Female, Minimum Attenuation: 0 dB. 0 to 70 dB Rotary Step Attenuator, BNC Female to BNC Female With 10 dB Step Rated to 1 Watt Up to 2 GHz. PE7034-4 is a stepped attenuator from Pasternack. Our BNC attenuator is a RF step attenuator design. This 50 Ohm manual step attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack coaxial step attenuator has a female gender for connector 1 and a BNC female for connector 2. PE7034-4 steped attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 70 dB with 10dB step sizes. Our RF step attenuator has frequency range of DC to 2 GHz and a maximum VSWR of 1.4. This adjustable BNC attenuator is rated to 1 at the stated attenuation. Our stepped attenuator PE7034-4 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This BNC attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 0 | ||
| PE1WAN034-15 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-34, Gain Min: 15, Beam Width, 3dB V: 32, Beam Width, 3dB H: 31, Frequency, Min: 22 GHz, Frequency, Max: 33 GHz. WR-34 Waveguide Antenna, 22 GHz to 33 Ghz Frequency Range, 15 dBi Gain, UG-1530/U Flange, Integrated Cage-Style Mount. The PE1WAN034-15 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-34 input and a waveguide to coaxial transition adapter. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-34 standard gain horn antenna with a input has a minimum frequency of 22 GHz and a maximum frequency of 33 GHz. Pasternack’s PE1WAN034-15 waveguide horn antenna has a typical gain of 15 dB. Our waveguide antenna has a typical vertical beam width of 32 degrees and a horizontal beam width of 31 degrees at 3 dB. This antenna has a length of 4.72 inches, a width of 3.15 inches, and a weight of 0.78 lbs. This WR-34 waveguide horn antenna with 15 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
 Teledyne HiRel | M38510/34105BSA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | ||
| M38510/34108B2A | Teledyne HiRel | REGISTER, D-TYPE, HEX PARALLEL RoHS : Not Compliant | 0 | |||
M38510/34901BCA | Teledyne HiRel | PARITY GENERATOR/CHECKER, 9-BIT RoHS : Not Compliant | 0 | |||
M38510/34102B2A | Teledyne HiRel | FLIP-FLOP, JK, DUAL RoHS : Not Compliant | 0 | |||
M38510/34301BEA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS RoHS : Not Compliant | 0 | |||
| M38510/34803B2A | Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, WITH INVERTING 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| M38510/34002BCA | Teledyne HiRel | AND GATE, TRIPLE 3-INPUT RoHS : Not Compliant | 0 | |||
| M38510/34109BEA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 4-BIT RoHS : Not Compliant | 0 | |||
| M38510/34002BXA | Teledyne HiRel | AND GATE, TRIPLE 3-INPUT RoHS : Not Compliant | 0 | |||
M38510/34901BDA | Teledyne HiRel | PARITY GENERATOR/CHECKER, 9-BIT RoHS : Not Compliant | 0 | |||
| M38510/34301B2A | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS RoHS : Not Compliant | 0 | |||
| M38510/34501BBA | Teledyne HiRel | EXCLUSIVE-OR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| M38510/34001BBA | Teledyne HiRel | AND GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
M38510/34304BFA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN, PRESETTABLE RoHS : Not Compliant | 0 | |||
| M38510/34002B2A | Teledyne HiRel | AND GATE, TRIPLE 3-INPUT RoHS : Not Compliant | 0 | |||
 Vyrian | AA1-B0-34-450-3B1-C | Carling Technologies | Magnetic Circuit Breaker, 1 Pole(s), 5A, 277VAC, 80VDC, Panel Mount RoHS : Compliant | 16,867 | ||
| AA1-B0-34-610-531-C | Carling Technologies | Magnetic Circuit Breaker, 1 Pole(s), 10A, 277VAC, 80VDC, Panel Mount RoHS : Compliant | 12,243 | |||
ADP5034ACPZ-1-R7 | Analog Devices Inc | Switching Regulator, Current-mode, 2.3A, 3500kHz Switching Freq-Max, DMOS RoHS : Compliant | 10,468 | |||
IPB034N03LGATMA1 | Infineon Technologies AG | Power Field-Effect Transistor, 80A I(D), 30V, 0.0047ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB RoHS : Compliant | 10,133 | |||
| MAX30034CUA+ | Analog Devices Inc | Trans Voltage Suppressor Diode, 5V V(RWM), Bidirectional, 4 Element, Silicon RoHS : Compliant | 9,458 | |||
| M38510/34101SCX | Texas Instruments | D Flip-Flop, F/FAST Series, 1-Func, Positive Edge Triggered, 1-Bit, Complementary Output, TTL, CDIP14 | 9,098 | |||
| PGA305EVM-034 | Texas Instruments | 8,457 | ||||
| JM38510/34002 | Texas Instruments | AND Gate, F/FAST Series, 4-Func, 2-Input, TTL, CQCC20 | 6,652 | |||
| JM38510/34105SRA | Texas Instruments | 6,652 | ||||
| M38510/34105B2X | Texas Instruments | Bus Driver, F/FAST Series, 1-Func, 8-Bit, True Output, TTL, CQCC20 | 6,292 | |||
M38510/34105BSA | Texas Instruments | Bus Driver, F/FAST Series, 1-Func, 8-Bit, True Output, TTL, CDFP20 RoHS : Not Compliant | 6,202 | |||
| NA03-407B | Broadcom Limited | 5,133 | ||||
| MT38M5041A3034EZZI.XR6 | Micron Technology Inc | Memory Circuit, 32MX16, CMOS, PBGA56 | 4,718 | |||
| M38510/34501BDX | Texas Instruments | XOR Gate, F/FAST Series, 4-Func, 2-Input, TTL, CDFP14 | 4,528 | |||
EPF10K30GC403-4 | Altera Corporation | Loadable PLD, 23.8ns, CMOS, CPGA403 | 3,513 | |||
 Win Source Electronics | CRCW0603470RFKEA | Vishay Huntington | RES SMD 470 OHM 1% 1/10W 0603 |
| 990,000 | |
| CRCW060347K0FKEA | Vishay Huntington | RES SMD 47K OHM 1% 1/10W 0603 / 47 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film |
| 54,290 | ||
| LM5034MT | Texas Instruments |
| 49,700 | |||
| SDMG0340LS-7-F | Diodes Incorporated | DIODE ARRAY SCHOTTKY 40V SOT323 RoHS : Compliant |
| 24,167 | ||
| 503480-0600 | Molex | 0.50mm (.020") Pitch Easy-On BackFlip FPC Connector, 1.00mm (.039") Height, Right Angle, SMT, Dual Contact RoHS : Compliant |
| 22,260 | ||
| MT9V034C12STM-DR1 | Innovision Semiconductor | SENSOR IMAGE VGA MONO 48-CLCC |
| 18,910 | ||
| SDMP0340LST-7-F | Diodes Incorporated | DIODE ARRAY SCHOTTKY 40V SOT523 RoHS : Compliant |
| 10,112 | ||
AD8034ART-REEL7 | Analog Devices Inc | Low Cost, 80 MHz FastFET Op Amps / Op Amp Dual GP R-R O/P ±12V/24V 8-Pin SOT-23 T/R RoHS : Compliant |
| 9,000 | ||
TL034IDR | Texas Instruments | IC OPAMP JFET 1.1MHZ 14SOIC RoHS : Compliant |
| 5,000 | ||
| LM20343MHX | National Semiconductor Corporation | 36V, 3A Adjustable Frequency Synchronous Buck Regulator RoHS : Not Compliant |
| 4,630 | ||
LM20343MHE/NOPB | Texas Instruments | IC REG BUCK ADJ 3A SYNC 20TSSOP RoHS : Compliant |
| 4,580 | ||
| LMH0346SQ | National Semiconductor Corporation | 3 Gbps HD/SD SDI Reclocker with Dual Differential Outputs RoHS : Not Compliant |
| 4,000 | ||
| LMH0341SQE | National Semiconductor Corporation | 3G, HD, SD, DVB-ASI SDI Deserializer with Loopthrough and LVDS Interface RoHS : Not Compliant |
| 2,300 | ||
| HDMP-1034AG | PMC-Sierra Inc | RoHS : Compliant |
| 219 | ||
821034DNG | Integrated Device Technology Inc | IC PCM CODEC QUAD MPI 52QFP RoHS : Compliant |
| 50 | ||
 Wuhan P&S | RCA0603475KFHEC | Vishay Intertechnologies | Sulfur Resistant Thick Film Chip Resistors RoHS : Compliant |
| 80,000 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand