047FDHKP Price, 販売店, Stock

Key Specifications, Generic Name: 047 Semi-rigid, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, No. of Shields: 1, Attenuation at 1 Ghz.: 40 dB, Power, Max at 1 Ghz.: 32 Watts, Frequency, Max: 40 GHz, Max Operating Temperature: 100 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, Repeated: 0.05 in, Coax Type: Coax. Semirigid Coax Cable 0.047 Diameter With Copper Outer Conductor. PE-047SR part number from Pasternack is a 047 Semi-rigid coax cable that is semi-rigid. Pasternack PE-047SR semi-rigid coax cable is 50 Ohm and has a PTFE dielectric.PE-047SR coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 40 GHz. PE-047SR coax cable has an attenuation at 1 GHz of 40 dB and a maximum power of 32 watts at 1 GHz. Pasternack 047 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-047SR cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-047SR or other coax can be built and shipped same day as well.

1 : $18.19
25 : $17.28
50 : $16.37
100 : $15.64

711

PE3W09204-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SHV Jack Bulkhead to SHV Plug Cable 72 Inch Length Using RG8 Coax., Radio frequency assembly SHV jack bulkhead to SHV plug cable 72 inch length using RG8 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV plug cable 72 inch length using RG8 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and plug on end 2. PE3W09204-72 can also be known as a SHV female to SHV male cable assembly and will be shipped same-day as it is purchased. SHV female to SHV male cable assembly PE3W09204-72 is built with RG8 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09204-72 can also be used in the other direction and will be SHV plug to SHV jack bulkhead cable assembly if the opposite connectivity is required. SHV female bulkhead to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV plug cable 72 inch length using RG8 coax.

1 : $301.99
25 : $286.89
50 : $271.79
100 : $259.71

PE7047-2

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.25:1, Attenuation: 2 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 2 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 12.4 GHz. PE7047-2 is a fixed 2 dB attenuator from Pasternack. This 2dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7047-2 2 dB attenuator is rated for up to 12.4 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7047-2 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 2dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $301.99
10 : $289.91
25 : $277.83

PE3M0047-72

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/84-RG223-0XDS2, RF Cable Type: M17/84-RG223, RF Cable Impedance: 50 Ohm, Length: 72 inches. MIL-DTL-17 N Female to TNC Male Cable 72 Inch Length Using M17/84-RG223 Coax., Radio frequency assembly MIL-DTL-17 N female to TNC male cable 72 inch length using M17/84-RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female to TNC male cable 72 inch length using M17/84-RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/02-0503 type N to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/02-0503 type N cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our M39012/02-0503 N type to M39012/26-0011 TNC cable assemblies have a female gender on end 1 and male on end 2. This M39012/02-0503 N type to M39012/26-0011 TNC cable is a female to male coax assembly, PE3M0047-72, can also be known as a MIL-DTL-17/MIL-C-17 M39012/02-0503 type N jack to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/02-0503 type N jack to M39012/26-0011 TNC plug cable assembly PE3M0047-72 is built with M17/84-RG223 which is a flexible coax type. The Pasternack flexible M39012/02-0503 N cable assembly is manufactured with M39012/02-0503 type N to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/02-0503 N type female to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0047-72 can also be used in the other direction and will be M39012/26-0011 TNC male to M39012/02-0503 type N female cable assembly if the opposite connectivity is required. M39012/02-0503 type N jack to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/02-0503 N type to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/02-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female to TNC male cable 72 inch length using M17/84-RG223 coax.

1 : $323.99
25 : $307.79
50 : $291.59

PE3MSA00477-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Lead Free 78 Ohm Bend Relief 3-Slot TRB Solder/Clamp Plug to Bend Relief 3-Lug TRB Solder/Clamp Jack for PE-30-02003 Twinax 48" Cable., Radio frequency assembly lead free 78 Ohm bend relief 3-Slot TRB solder/clamp plug to bend relief 3-Lug TRB solder/clamp jack for PE-30-02003 twinax 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 78 Ohm bend relief 3-Slot TRB solder/clamp plug to bend relief 3-Lug TRB solder/clamp jack for PE-30-02003 twinax 48" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00477-48 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MSA00477-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00477-48 can also be used in the other direction and will be TRB jack to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 78 Ohm bend relief 3-Slot TRB solder/clamp plug to bend relief 3-Lug TRB solder/clamp jack for PE-30-02003 twinax 48" cable.

1 : $241.99
25 : $229.89
50 : $217.79
100 : $208.11

PE3W00474/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMP Female to SMA Female Bulkhead Cable Using PE-SR405FL Coax with HeatShrink., Radio frequency assembly SMP female to SMA female bulkhead cable using PE-SR405FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA female bulkhead cable using PE-SR405FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP cable connection on one end and a SMA bulkhead cable connection on the other. Our SMP to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3W00474/HS can also be known as a SMP jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our SMP female to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMP jack to SMA jack cable assembly PE3W00474/HS is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W00474/HS can also be used in the other direction and will be a SMA female bulkhead to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMA RF cable assembly as per your requirements.

PE3W00474LF-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female Bulkhead to SMP Female Cable 12 Inch Length Using PE-SR405FL Coax, LF Solder., Radio frequency assembly SMA female bulkhead to SMP female cable 12 inch length using PE-SR405FL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMP female cable 12 inch length using PE-SR405FL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMP cable connection on the other. Our SMA to SMP cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMP cable is a female to female coax assembly, PE3W00474LF-12, can also be known as a SMA jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3W00474LF-12 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female bulkhead to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00474LF-12 can also be used in the other direction and will be SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMP female cable 12 inch length using PE-SR405FL coax, LF solder.

1 : $99.59
25 : $94.61
50 : $89.63
100 : $85.65

PE3W04720

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Right Angle Cable Using RG8X Coax. PE3W04720 is a SMA male to TNC male right angle cable using RG8X coax. This Pasternack SMA male to TNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04720 SMA male to TNC male right angle cable assembly is constructed with RG8X coax.

PE3W04721/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to TNC Male Right Angle Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to TNC male right angle low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male right angle low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04721/HS-24 can also be known as a low loss SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W04721/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04721/HS-24 can also be used in the other direction and will be right angle TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male right angle low loss cable 24 inch length using LMR-100 coax with heatshrink.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

PE3W04726

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. TNC Male to Reverse Polarity TNC Female Cable Using LMR-400-DB Coax. PE3W04726 is a TNC male to reverse polarity TNC female cable using LMR-400-DB coax. This Pasternack TNC male to reverse polarity TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to reverse polarity female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04726 TNC male to TNC reverse polarity female cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W08047

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. 3.5mm Female to 3.5mm Female Bulkhead Cable Using PE-SR402AL Coax. PE3W08047 is a 3.5mm female to 3.5mm female bulkhead cable using PE-SR402AL coax. This Pasternack 3.5mm female to 3.5mm female bulkhead cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our female 3.5mm to female 3.5mm bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08047 3.5mm female to 3.5mm female bulkhead cable assembly is constructed with PE-SR402AL coax.

PE3W11047-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SSMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SSMB Jack Bulkhead to Slide-On BMA Plug Bulkhead Cable 12 Inch Length Using RG316-DS Coax., Radio frequency assembly SSMB jack bulkhead to slide-on BMA plug bulkhead cable 12 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMB jack bulkhead to slide-on BMA plug bulkhead cable 12 inch length using RG316-DS coax, SSMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMB to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMB bulkhead cable connection on one end and BMA bulkhead cable connection on the other. Our SSMB to BMA cable assemblies have a jack gender on end 1 and plug on end 2. PE3W11047-12 can also be known as a SSMB female to BMA male cable assembly and will be shipped same-day as it is purchased. SSMB female to BMA male cable assembly PE3W11047-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with SSMB to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SSMB jack bulkhead to BMA plug bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11047-12 can also be used in the other direction and will be BMA plug bulkhead to SSMB jack bulkhead cable assembly if the opposite connectivity is required. SSMB female bulkhead to BMA male bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMB to BMA cable assembly for quick shipment worldwide. Variations of SSMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMB jack bulkhead to slide-on BMA plug bulkhead cable 12 inch length using RG316-DS coax.

1 : $177.99
25 : $169.09
50 : $160.19
100 : $153.07

PE3W20470/HS/PH90

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm. 2.92mm Male Right Angle to Mini SMP Female Right Angle Cable Using PE-P047 Coax with HeatShrink and 90 Deg. Clock. PE3W20470/HS/PH90 is a 2.92mm male right angle to Mini SMP female right angle cable using PE-P047 coax. This Pasternack 2.92mm male right angle to Mini SMP female right angle cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm Mini SMP for connector 2. 2.92mm right angle to Mini SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.92mm right angle to female Mini SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20470/HS/PH90 2.92mm male right angle to Mini SMP female right angle cable assembly is constructed with PE-P047 coax.

PE3W20476

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX007, RF Cable Type: 141LL SR, RF Cable Impedance: 50 Ohm. 2.2-5 Male to Push-On 4.3-10 Male Cable Using 141 Coax. PE3W20476 is a 2.2-5 male to 4.3-10 male cable using 141LL SR coax. This Pasternack 2.2-5 male to 4.3-10 male cable assembly uses a 50 Ohm 2.2-5 for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our male 2.2-5 to male 4.3-10 cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20476 2.2-5 male to 4.3-10 male cable assembly is constructed with 141LL SR coax.

PE3W24047/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. TNC Male to 3.5mm Male Cable Using PE-P086HF Coax with HeatShrink. PE3W24047/HS is a TNC male to 3.5mm male cable using PE-P086HF coax. This Pasternack TNC male to 3.5mm male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm 3.5mm for connector 2. Our male TNC to male 3.5mm cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24047/HS TNC male to 3.5mm male cable assembly is constructed with PE-P086HF coax.

Venkel Ltd.

C1210X7R100-475KNE

VENKEL LTD

Chip Capacitor;1210;X7R;10V;4.7uF;�10%
RoHS : Compliant

377,702

C0402X7R500-471KNE

VENKEL LTD

Chip Capacitor;0402;X7R;50V;470pF;�10%
RoHS : Compliant

76,000

C0603Z5U250-473ZNP

VENKEL LTD

Chip Capacitor;0603;Z5U;25V;0.047uF;+80-20%
RoHS : Compliant

71,252

C0603X7R160-471MNP

VENKEL LTD

Chip Capacitor;0603;X7R;16V;470pF;�20%
RoHS : Compliant

5,332

C0201C0G250-470GNP

VENKEL LTD

Chip Capacitor;0201;C0G;25V;47pF;�2%
RoHS : Compliant

C0402X7R160-472KNP

VENKEL LTD

Chip Capacitor;0402;X7R;16V;4700pF;�10%
RoHS : Compliant

C0603HQN500-470JNP

VENKEL LTD

High-Q NP0 Chip Capacitor;0603;HQN;50V;47pF;�5%
RoHS : Compliant

C0805C0G500-472FNE

VENKEL LTD

Chip Capacitor;0805;C0G;50V;4700pF;�1%
RoHS : Compliant

C0805HQN500-470FNP

VENKEL LTD

High-Q NP0 Chip Capacitor;0805;HQN;50V;47pF;�1%
RoHS : Compliant

C1206C0G500-470JNE

VENKEL LTD

Chip Capacitor;1206;C0G;50V;47pF;�5%
RoHS : Compliant

C1812X7R500-475MNE

VENKEL LTD

Chip Capacitor;1812;X7R;50V;4.7uF;�20%
RoHS : Compliant

CSMF0603-RK-R047JT

VENKEL LTD

Current Sense Metal Foil CR;0603;1/8W;�100PPM;47mR;�5%
RoHS : Compliant

LCR0805-R047FT

VENKEL LTD

Low Value CR;0805;47m ohm;�1%
RoHS : Compliant

C0402X7R500-471JNP

VENKEL LTD

Chip Capacitor;0402;X7R;50V;470pF;�5%
RoHS : Compliant

C0603C0G250-471KNE

VENKEL LTD

Chip Capacitor;0603;C0G;25V;470pF;�10%
RoHS : Compliant

Vyrian

10-476808-189

Amphenol Corporation

Connector Accessory, Clamping Item

16,499

APX803L20-47W5-7

Diodes Incorporated

Power Supply Support Circuit, Fixed, 1 Channel, +4.7V, PDSO5

11,669

1923047

Phoenix Contact

Modular Terminal Block, 32A, 4mm2, 1 Row(s), 2 Deck(s)
RoHS : Compliant

10,260

V62/04755-07XE

Texas Instruments

Operational Amplifier, 1 Func, 600uV Offset-Max, BIPolar, PDSO8
RoHS : Compliant

9,008

3060474

Phoenix Contact

Non-Metric items
RoHS : Compliant

9,006

2N5047

Texas Instruments

Small Signal Field-Effect Transistor, 2-Element, N-Channel, Silicon, Junction FET, TO-71
RoHS : Not Compliant

8,705

3047361

Phoenix Contact

Labeling Materials
RoHS : Compliant

7,182

V62/04715-02YE

Texas Instruments

Registered Bus Transceiver, LVT Series, 2-Func, 8-Bit, True Output, BICMOS, PDSO56
RoHS : Compliant

5,664

UPD78F0473GC-GAD-AX

Renesas Electronics Corporation

Microcontroller, 8-Bit, FLASH, UPD78K0 CPU, 10MHz, PQFP80
RoHS : Compliant

5,570

LM3478MMX-S5000472

Texas Instruments

4,818

3047442

Phoenix Contact

Modular Terminal Block, 10mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

4,669

3047280

Phoenix Contact

Terminal Block Accessory, Jumper Item, PA66
RoHS : Compliant

4,152

3047154

Phoenix Contact

Terminal Block Accessory, End Cover
RoHS : Compliant

3,878

3047073

Phoenix Contact

Terminal Block Accessory
RoHS : Compliant

787

260-4.7

Xicon Passive Components

Fixed Resistor, Metal Glaze/thick Film, 0.1W, 4.7ohm, 150V, 5% +/-Tol, 400ppm/Cel, 0805

549

Waytek, Inc.

15304730

Aptiv PLC

22-20GA Male Terminal GT 280 2,000/REEL DELPHI 15304730 Tin Plated .50 TO .35 MM2

2,000 : $0.5208
10,000 : $0.4774

26,000

15304732

Aptiv PLC

16-12 GA Male Terminal GT 280 2,000 Reel DELPHI tin plated 3 disc way, no repl
RoHS : Compliant

2,000 : $0.0521
10,000 : $0.0481

26,000

15304719

Aptiv PLC

18-16GA Female Terminal GT 280 2,500/Reel DELPHI 15304719 Tin Plated 1.00 TO .75 MM2

2,500 : $0.0672
12,500 : $0.0609

7,500

15304732-L

Aptiv PLC

16-12 GA Male Terminal GT 280 DELPHI 15304732 Loose Piece Tin Plated 3.00 TO 1.50 MM2

100 : $0.1708
200 : $0.1584
500 : $0.144
1,000 : $0.1336
5,000 : $0.1275

6,979

19164-0047

Molex

16-14 Ga Blue Perma-Seal Female Quick Disconnect 31773
RoHS : Compliant

15 : $0.5502
50 : $0.5485
100 : $0.5183
200 : $0.4867
500 : $0.4599
1,000 : $0.4276

4,222

15304731-L

Aptiv PLC

18-16 GA Male Terminal GT 280 DELPHI 15304731 Loose Piece TIN PLATED 1.00 TO .75 MM2

100 : $0.1273
200 : $0.1087
500 : $0.0989
1,000 : $0.0923
5,000 : $0.0835

4,177

15304719-L

Aptiv PLC

18-16GA Female Terminal GT 280 DELPHI 15304719 Loose Piece Tin Plated 1.00 - .75 MM2

50 : $0.1782
200 : $0.1311
500 : $0.1158
1,000 : $0.1072
5,000 : $0.1035

4,128

15304718-L

Aptiv PLC

22-20GA Female Terminal GT 280 DELPHI 15304718 Loose Piece TIN PLATED .50 TO .35 MM2

100 : $0.1703
200 : $0.1338
500 : $0.1196
1,000 : $0.1096
5,000 : $0.1026

2,879

15304730-L

Aptiv PLC

22-20GA Male Terminal GT 280 DELPHI 15304730 Loose Piece TIN PLATED .50 TO .35 MM2

100 : $0.8629
200 : $0.8331
500 : $0.81
1,000 : $0.7736
5,000 : $0.7505

2,392

19215-0047

Molex

1/0 GA Butt Connector Non-Insulated Seamless

1 : $2.43
10 : $2.2728
50 : $2.169
100 : $1.9651
200 : $1.9
500 : $1.8348

1,685

19221-0478

Molex

3/0 Copper Eyelet 1/4" Stud
RoHS : Compliant

1 : $1.7312
10 : $1.6214
50 : $1.548
100 : $1.4027
200 : $1.3584
500 : $1.3079

650

24047

Cole Hersee

Solenoid Intermittent Duty 12V INSL SPST MR750A/ BR100A

1 : $56.8
5 : $54.64
10 : $52.96
20 : $50.3
50 : $48.38
100 : $46.69

19160-0047

Molex

Wing Lock Wire Connector Blue 14-6 GA
RoHS : Compliant

50 : $0.1483
200 : $0.1368
500 : $0.1253
1,000 : $0.1189

90047

Cole Hersee

Cole Hersee 90047 momentary engine start switch is a black SPST push-button switch rated 35A at 12VDC and 20A at 24VDC. It features screw terminals, 7/8"-24 mounting stem, die-cast housing, knurled aluminum face nut, and liquid-repellent design.

1 : $20.87
5 : $20.15
10 : $19.12
50 : $18.46
100 : $17.02
200 : $17.02

13519047

Aptiv PLC

3 Way Female GT 150 Sealed Connector DELPHI 13519047

1 : $1.1046
50 : $0.9886
100 : $0.8965
200 : $0.8645
500 : $0.8365
1,000 : $0.8045