| データシートサーチシステム |
|
058LFCK-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() Pasternack Enterprises US | PE3W05820 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male to SMA Male Right Angle Low Loss Cable Using LMR-240-UF Coax., Radio frequency assembly N male to SMA male right angle low loss cable using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male right angle low loss cable using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle SMA cable connection on the other. Our low loss type N to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W05820 can also be known as a low loss type N plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3W05820 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05820 can also be used in the other direction and will be right angle SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA male right angle low loss cable using LMR-240-UF coax. | 4,200 | ||
| PE3W00582 | Pasternack Enterprises | Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. UHF Male to UHF Male Cable Using RG213 Coax., Radio frequency assembly UHF male to UHF male cable using RG213 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The UHF male to UHF male cable using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to UHF cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with UHF cable connection on one end and UHF cable connection on the other. Our UHF to UHF cable assembly has male gender on end 1 and male on end 2. PE3W00582 can also be known as a UHF plug to UHF plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. UHF plug to UHF plug cable assembly PE3W00582 is built with RG213 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W00582 RF cable are available on our downloadable PDF datasheet. UHF plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF RF cable assembly as per your requirements. | 373 | |||
| PE44058 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: UHF, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 300 MHz, Interface Type 1: RG58, Interface Type 2: RG303, Interface Type 3: RG141, Interface Type 4: PE-C195, Interface Type 5: PE-P195, Interface Type 6: LMR-195, Interface Type 7: .195 inch. UHF Female Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0.195 inch. PE44058 UHF female coaxial connector has an interface type of RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, .195 inch and a 50 Ohm impedance. Pasternack UHF female connector uses shield/contact crimp/solder as an attachment method. Our female UHF coaxial connector provides a minimum frequency of DC and a maximum frequency of 300 MHz. The Pasternack UHF female coaxial connector has a PTFE dielectric type and a VSWR of 1.3. The Pasternack UHF coaxial connector has a brass body with nickel plating. Our PE44058 UHF connector uses brass contact. This UHF female coaxial RF connector is RoHS and REACH compliant. This Pasternack female UHF connector will ship the same day as purchased. Our UHF female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom UHF connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave. |
| 278 | ||
| PE3W00582LF-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. UHF Male to UHF Male Cable 72 Inch Length Using RG213 Coax, LF Solder., Radio frequency assembly UHF male to UHF male cable 72 inch length using RG213 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The UHF male to UHF male cable 72 inch length using RG213 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to UHF cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a UHF cable connection on one end and a UHF cable connection on the other. Our UHF to UHF cable assembly has a male gender on end 1 and a male on end 2. PE3W00582LF-72 can also be known as a UHF plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W00582LF-72 RF cable has a PVC jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -25 to 70 degrees C. The flexible RF cable has an in-series connection. Our UHF male to UHF male cable has a maximum VSWR of 1.4:1. UHF plug to UHF plug cable assembly PE3W00582LF-72 is built with RG213 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. UHF plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to UHF RF cable assembly as per your requirements. |
| 43 | ||
| PE3C10582 | Pasternack Enterprises | 0 | ||||
| PE3W00583 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Cable Using PE-SR40. PE3W00583 is a 7/16 DIN male to 7/16 DIN male cable using PE-SR402FLJ coax. This Pasternack 7/16 DIN male to 7/16 DIN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to male 7/16 DIN cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W00583 7/16 DIN male to 7/16 DIN male cable assembly is constructed with PE-SR402FLJ coax. | 0 | |||
| PE3W05821 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMA Male Cable Using RG405 Coax. PE3W05821 is a N female bulkhead to SMA male cable using RG405 coax. This Pasternack N female bulkhead to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N bulkhead to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W05821 N female bulkhead to SMA male cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W05058/BL/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMP Female to TNC Male Cable Using PE-P086HF Coax with HeatShrink., Pasternack’s PE3W05058/BL/HS SMP female to TNC male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMP cable connection on one end and a TNC cable connection on the other. Our SMP to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3W05058/BL/HS can also be known as a SMP jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W05058/BL/HS RF cable has an FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This PE3W05058/BL/HS SMP jack to TNC plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with SMP to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05058/BL/HS can also be used in the other direction and will be a TNC male to SMP female cable assembly if the opposite connectivity is required. This SMP jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to TNC cable assembly for quick shipment worldwide. Variations of SMP and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to TNC RF cable assembly as per your requirements. | 0 | |||
| PE3W05800/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Reverse Polarity TNC Male Cable Using LMR-240-DB Coax with HeatShrink. PE3W05800/HS is a reverse polarity TNC male to reverse polarity TNC male cable using LMR-240-DB coax. This Pasternack reverse polarity TNC male to reverse polarity TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male TNC to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05800/HS TNC reverse polarity male to TNC reverse polarity male cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W05835LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. BNC Male to TNC Male Cable Using LMR-240 Coax, LF Solder. PE3W05835LF is a BNC male to TNC male cable using LMR-240 coax. This Pasternack BNC male to TNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm TNC for connector 2. Our male BNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05835LF BNC male to TNC male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W05857 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. HN Male to SC Male Cable Using RG225 Coax., Radio frequency assembly HN male to SC male cable using RG225 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to SC male cable using RG225 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to SC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and SC cable connection on the other. Our HN to SC cable assembly has male gender on end 1 and male on end 2. PE3W05857 can also be known as a HN plug to SC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. HN plug to SC plug cable assembly PE3W05857 is built with RG225 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to SC cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W05857 RF cable are available on our downloadable PDF datasheet.PE3W05857 can also be used in the other direction and will be SC male to HN male cable assembly if the opposite connectivity is required. HN plug to SC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to SC cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal HN RF cable assembly as per your requirements. | 0 | |||
| PE3W08058LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to SSMB Plug Cable Using RG178 Coax, LF Solder. PE3W08058LF is a BMA plug bulkhead to SSMB plug cable using RG178 coax. This Pasternack BMA plug bulkhead to SSMB plug cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SSMB for connector 2. Our plug BMA bulkhead to plug SSMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08058LF BMA plug bulkhead to SSMB plug cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W20058 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack Right Angle to FAKRA Jack Right Angle Cable Using RG174 Coax. PE3W20058 is a FAKRA jack right angle to FAKRA jack right angle cable using RG174 coax. This Pasternack FAKRA jack right angle to FAKRA jack right angle cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. FAKRA right angle to FAKRA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack FAKRA right angle to jack FAKRA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20058 FAKRA jack right angle to FAKRA jack right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3C10581 | Pasternack Enterprises | 0 | ||||
| PE3C11058 | Pasternack Enterprises | 0 | ||||
![]() Venkel Ltd. | CRS0805-8W-10R5FT | VENKEL LTD | Anti-Sulfuration CR;0805;1/8W;10.5R;�1% RoHS : Compliant | 0 | ||
| CRS0805-8W-1180FT | VENKEL LTD | Anti-Sulfuration CR;0805;1/8W;118R;�1% RoHS : Compliant | 0 | |||
| CRS0805-8W-121JT | VENKEL LTD | Anti-Sulfuration CR;0805;1/8W;120R;�5% RoHS : Compliant | 0 | |||
| CRS0805-8W-15R0FT | VENKEL LTD | Anti-Sulfuration CR;0805;1/8W;15R;�1% RoHS : Compliant | 0 | |||
| CRS0805-8W-19R6FT | VENKEL LTD | Anti-Sulfuration CR;0805;1/8W;19.6R;�1% RoHS : Compliant | 0 | |||
| CRS0805-8W-202JT | VENKEL LTD | Anti-Sulfuration CR;0805;1/8W;2K;�5% RoHS : Compliant | 0 | |||
| CRS0805-8W-2152FT | VENKEL LTD | Anti-Sulfuration CR;0805;1/8W;21.5K;�1% RoHS : Compliant | 0 | |||
| CRS0805-8W-4222FT | VENKEL LTD | Anti-Sulfuration CR;0805;1/8W;42.2K;�1% RoHS : Compliant | 0 | |||
| CRS0805-8W-47R5FT | VENKEL LTD | Anti-Sulfuration CR;0805;1/8W;47.5R;�1% RoHS : Compliant | 0 | |||
| CRS0805-8W-5113FT | VENKEL LTD | Anti-Sulfuration CR;0805;1/8W;511K ;�1% RoHS : Compliant | 0 | |||
| CRS0805-8W-9092FT | VENKEL LTD | Anti-Sulfuration CR;0805;1/8W;90.9K;�1% RoHS : Compliant | 0 | |||
| CR0805-8W-1242FT | VENKEL LTD | Chip Resistor;0805;1/8W;12.4K;�1% RoHS : Compliant | 0 | |||
| CR0805-8W-1271DT | VENKEL LTD | Chip Resistor;0805;1/8W;1.27K;�0.5% RoHS : Compliant | 0 | |||
| CR0805-8W-13R3DT | VENKEL LTD | Chip Resistor;0805;1/8W;13.3R;�0.5% RoHS : Compliant | 0 | |||
| CR0805-8W-1404FT | VENKEL LTD | Chip Resistor;0805;1/8W;1.4M;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | VMS-350-58-1 | CUI Inc | AC-DC Power Factor Correction Module, 1 Output, 350W, Hybrid RoHS : Compliant | 17,445 | ||
| V1DAAC05-8SZ00-000 | Carling Technologies | Rocker Switch, SPST, On-off, Maintained, 20A, 12VDC, Quick Connect Terminal, Rocker Actuator, Panel Mount RoHS : Compliant | 13,117 | |||
| VMS-550-58 | CUI Inc | AC-DC Regulated Power Supply Module, 1 Output, 550W, Hybrid RoHS : Compliant | 10,101 | |||
UPD78F0058YGC-8BT-A![]() | Renesas Electronics Corporation | RISC Microcontroller, 8-Bit, FLASH, UPD78K0 CPU, 5MHz, CMOS, PQFP80 RoHS : Compliant | 9,867 | |||
| W1202-600058 | Broadcom Limited | 9,719 | ||||
UPD78F0058GK-9EU-A![]() | Renesas Electronics Corporation | RISC Microcontroller, 8-Bit, FLASH, UPD78K0 CPU, 5MHz, CMOS, PQFP80 RoHS : Compliant | 8,833 | |||
| W1187-600058 | Broadcom Limited | 8,005 | ||||
| VX-705-1058-122M880000TR | Microchip Technology Inc | CMOS Output Clock Oscillator, 122.88MHz Nom RoHS : Compliant | 7,502 | |||
| W1198-600058 | Broadcom Limited | 5,199 | ||||
TMS370C058AFNL![]() | Texas Instruments | Microcontroller, 8-Bit, MROM, TMS370 CPU, 5MHz, CMOS, PQCC68 RoHS : Not Compliant | 3,720 | |||
TMS370C058AFNA![]() | Texas Instruments | Microcontroller, 8-Bit, MROM, TMS370 CPU, 5MHz, CMOS, PQCC68 RoHS : Not Compliant | 3,007 | |||
| XC7S100-DIE4058 | AMD Xilinx | 2,807 | ||||
| XC5204-6PQ160C0585 | AMD Xilinx | 2,454 | ||||
| XC5202-6PQ100C0584 | AMD Xilinx | 2,341 | ||||
| VMS-350-58 | CUI Inc | AC-DC Regulated Power Supply Module, 1 Output, 350W, Hybrid RoHS : Compliant | 661 | |||
![]() Waytek, Inc. | 140586-91 | General Cable Technologies Corporation | 18GA TXL Red Cross-Link Automotive Wire XLPE -51C to 125C |
| 168,000 | |
| 140582-91W | General Cable Technologies Corporation | 14GA TXL Brown Cross-Link Automotive Wire XLPE -51C to 125C |
| 73,500 | ||
| 140588-91W | General Cable Technologies Corporation | 14GA TXL Orange Cross-Link Automotive Wire XLPE -51C to 125C |
| 32,000 | ||
| 140589-91W | General Cable Technologies Corporation | 14GA TXL Pink Cross-Link Automotive Wire XLPE -51C to 125C |
| 23,500 | ||
| 19164-0058 | Molex | 12-10GA Ring Terminal Stud 1/2 Perma-Seal Heat Shrink RoHS : Compliant |
| 11,927 | ||
| 7000005801 | 3M | The 3M Scotchlok 951K self-stripping T-tap connects 22-18 Ga. wire without removing insulation. Its red flame-retardant nylon housing is rated 600VDC and 221F (105C), with a female fastener orientation for a mating disconnect. The UL-listed, CSA-rated connector installs with pliers. |
| 8,910 | ||
| 7000005870 | 3M | 3M IDC Splice Tap White 18-14 GA ALT PN 31577 |
| 5,509 | ||
| 7000005800 | 3M | The 3M 14879 Scotchlok 558 IDC tap connector makes run or tap connections on 22-18 Ga. wire without stripping. Its red flame-retardant housing contains a tin-plated brass contact rated 600VDC and 221F (105C). The U-contact installs with a squeeze for fast insulated wiring assembly. |
| 3,481 | ||
| 184058-1 | TE Connectivity | AMP Sealed Sensor 12 Position Locking Plate RoHS : Compliant |
| 584 | ||
| 7000058491 | 3M | 3M 7000058491 linerless rubber electrical tape is black Scotch tape in a 3/4" x 15' roll with 30 mil thickness and 750VDC/mil dielectric strength. Rated to 194F, this highly conformable ethylene propylene rubber tape is built for all-voltage splicing, jacketing, and insulating. |
| 106 | ||
| 7000058437 | 3M | 3M 7000058437 Scotch Vinyl Electrical Tape 35 is violet professional-grade 3/4" x 66' tape with 7 mil thickness and a 600VDC rating. Rated from -14F to 176F, it is flame retardant, conforms to irregular shapes, and resists UV, abrasion, moisture, alkalies, solvents, and many acids. |
| 103 | ||
| 058PEBSX BLACK SLIT | Drossbach Inc | Corrugated Loom .625" ID split Polyethylene Black 800' Box #18 |
| 36 | ||
| 7000005815 | 3M | 3M 7000005815 glass cloth electrical tape is white 3/4" x 66' Scotch tape with 7 mil thickness and a 600VDC rating. Rated from 32F to 302F, it uses woven glass cloth with rubber thermosetting adhesive and provides abrasion-resistant coil, layer, and crossover insulation. |
| 15 | ||
| 7000005872 | 3M | 3M Scotch Electrical Moisture Sealant 7000005872 is black 2-1/2" x 10' sealant tape with 45 mil thickness, 600VDC rating, and water-activated self-fusing rubber-based mastic construction. It seals high-voltage cables and electrical connections and is rated from 0F to 176F. |
| 13 | ||
| 140587-91W | General Cable Technologies Corporation | 14GA TXL Lt Green Cross-Link Automotive Wire XLPE -51C to 125C |
| 0 | ||
![]() Win Source Electronics | 50058-8000 | Molex | SMT Friction Lock Vertical Header and Receptacle RoHS : Compliant |
| 990,000 | |
| DMN2058U-7 | Diodes Incorporated | MOSFET N-CH 20V 4.6A SOT23-3 RoHS : Compliant |
| 174,570 | ||
| QPL9058TR7 | Qorvo | 0.5-6.0 GHZ ULTRA LNA RoHS : Compliant |
| 65,640 | ||
| HK10058N2J-T | TAIYO YUDEN | FIXED IND 8.2NH 380MA 280 MOHM RoHS : Compliant |
| 27,180 | ||
| LTC2058IS8E | Analog Devices Inc | Quad Zero-Drift Operational Amplifier |
| 14,775 | ||
2SK1058-E![]() | Renesas Electronics Corporation | MOSFET N-CH 160V 7A TO-3P RoHS : Compliant |
| 11,320 | ||
| MAX17058X+ | Maxim Integrated Products | IC BAT FUEL GAUGE LI-ION 1C 8WLP RoHS : Compliant |
| 10,595 | ||
MAX3058ASA+T![]() | Maxim Integrated Products | IC TXRX CAN 1MBPS 8-SOIC RoHS : Compliant |
| 5,000 | ||
| M058LDN | Nuvoton Technology Corp | IC MCU 32BIT 32KB FLASH 48LQFP RoHS : Compliant |
| 4,000 | ||
AD8058ARZ![]() | Analog Devices Inc | IC OPAMP VFB 325MHZ 8SOIC RoHS : Compliant |
| 3,460 | ||
| 83058AGILFT | Renesas Electronics Corporation | IC CLK MULTPX 8:1 16TSSOP / Clock Multiplexer IC 8:1 250 MHz 16-TSSOP (0.173", 4.40mm Width) RoHS : Compliant |
| 2,930 | ||
| QPL9058T | Qorvo | Ultra-Low Noise Amplifier 0.6-6GHz |
| 2,500 | ||
| 854S058AGILF | Renesas Electronics Corporation | IC CLK MULTPX 8:1 2.5GHZ 24TSSOP RoHS : Compliant |
| 1,793 | ||
AD8058ARM-REEL![]() | Analog Devices Inc | IC OPAMP VFB 325MHZ 8MSOP RoHS : Not Compliant |
| 790 | ||
| 205843-1 | TE Connectivity | CONN RCPT HSNG MALE 63POS PNL MT / 63 Position Circular Connector Receptacle Housing Panel Mount RoHS : Compliant |
| 200 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |