0827.5-R Price, 販売店, Stock

The sleek flush-mount design of these latches gives designers a more stylish alternative for delivering the functionality of compressive action that provides a watertight seal and dampens vibration to reduce noise and rattle. Simply lift the handle to rel

12SWS0827

Essentra Components

AC-CBH0-8-2700-014

Southco

470827

Essentra Components

1008270000VR

Essentra Components

0827-S-43

RAF Electronic Hardware

EBV Elektronik

5082-7611-GH000

Broadcom Limited

Segment LED Display Common Anode 1 Digit 8 LEDs Red 08mcd (Alt: 5082-7611-GH000)
RoHS : Compliant

1,800

5082-7611

Broadcom Limited

Segment LED Display Common Anode 1 Digit 8 LEDs Red 48mcd (Alt: 5082-7611)
RoHS : Compliant

800

5082-7620

Broadcom Limited

Displays Segmented Module 1DIGIT 8LED Yellow CA 14Pin DIP (Alt: 5082-7620)
RoHS : Compliant

5082-7610

Broadcom Limited

7 Segment LED Display Red 20 mA 21 V 1115 mcd 1 76 mm (Alt: 5082-7610)
RoHS : Compliant

5082-7650

Broadcom Limited

Segment LED Display Common Anode 1 Digit 8 LEDs High Efficiency Red 1115ucd Tube (Alt: 5082-7650)
RoHS : Compliant

5082-7651

Broadcom Limited

7 Segment LED Display Red 20 mA 21 V 1115 mcd 1 109 mm (Alt: 5082-7651)
RoHS : Compliant

5082-7653

Broadcom Limited

7 Segment LED Display Red 20 mA 21 V 1115 mcd 1 109 mm (Alt: 5082-7653)
RoHS : Compliant

5082-7621

Broadcom Limited

7 Segment LED Display Yellow 20 mA 22 V 835 cd 1 76 mm (Alt: 5082-7621)
RoHS : Compliant

ECCO

10-827464-12S

Amphenol Aerospace

1 : $212.87

Maritex

430450827

Molex

Male Pin Headers; 430450827; MOLEX; 2; Tin; Vertical; 8

1,440 : $0.442
300 : $0.496
100 : $0.528
30 : $0.691
10 : $0.889
1 : $1.1123

2,879

Master Electronics

5787082-7

TE Connectivity

D Sub Connector - 68 Contacts - Receptacle - Solder - AMPLIMITE 0.050 Series - Steel Body.
RoHS : Compliant

1,152 : $6.65
864 : $6.78
576 : $9.86
288 : $18.68
104 : $18.73
56 : $18.78
8 : $18.82

167

20827057

nVent Schroff

Kit Piu Id Plate 4Hp (100 Pcs) |Nvent Schroff 20827-057
RoHS : Compliant

1 : $87.2

TSW-208-27-T-S

Samtec Inc

RoHS : Compliant

10,000 : $0.507
7,500 : $0.64
5,000 : $0.658
2,500 : $0.795
1,000 : $0.886
500 : $1.164
250 : $1.219
25 : $1.5

132039-0827

ITT Interconnect Solutions

Circular Plastic Push Pull Straight Plug w/Cable Gray 6 Pin 6 A PLA Series | ITT Cannon PLA1G022H06
RoHS : Compliant

200 : $17.83
150 : $18.19
100 : $25.85
50 : $48.82

1910827

Phoenix Contact

PCB connector - nominal current: 12 A - rated voltage (III/2): 320 V - nominal cross section: 2.5 mm² - number of positions: 2 - pitch: 5 mm - connection method: Push-in spring connection - color: green - contact surface: Tin
RoHS : Compliant

7,500 : $2.18
5,000 : $2.21
2,500 : $2.24
1,000 : $2.3
500 : $2.33
250 : $2.46
100 : $2.61
50 : $2.78

S2SDT-10-24-L-08.27-D-NUS

Samtec Inc

RoHS : Compliant

250 : $13.47
100 : $14.21
50 : $19.78
25 : $20.37
10 : $20.99
5 : $22.01
1 : $23.53

11108274-00

TE Connectivity

MOQ Reduction
RoHS : Compliant

5 : $455.34
4 : $464.63
3 : $521.69
2 : $635.81

0827561

Phoenix Contact

Conductor marker - Sheet - yellow - unlabeled - can be labeled with: BLUEMARK ID COLOR - BLUEMARK ID - BLUEMARK CLED - PLOTMARK - CMS-P1-PLOTTER - mounting type: slide-on - cable diameter range: 2.1 ... 2.9 mm - lettering field size: 12 x 3.5 mm - Number of individual labels: 40
RoHS : Compliant

10 : $7.69
1 : $8.09

0827804

Phoenix Contact

Alignment tool for cable markers - orange - can be labeled with: BLUEMARK ID COLOR - BLUEMARK ID - BLUEMARK CLED - PLOTMARK - CMS-P1-PLOTTER - mounting type: slide-on - cable diameter range: 2.9 ... 3.6 mm
RoHS : Compliant

100 : $0.54
20 : $0.57

0827886

Phoenix Contact

Plastic label - Sheet - yellow - unlabeled - can be labeled with: BLUEMARK ID COLOR - BLUEMARK ID - BLUEMARK CLED - PLOTMARK - CMS-P1-PLOTTER - mounting type: adhesive - lettering field size: 17 x 15 mm - Number of individual labels: 8
RoHS : Compliant

10 : $5.49
1 : $5.78

ARC6-08-27.0-LU-LD-2-1

Samtec Inc

AcceleRate Slim Cable Assembly 0.635 mm Pitch
RoHS : Compliant

250 : $39.53
100 : $40.05
50 : $42.42
25 : $45.57
10 : $49.11
5 : $52.19
1 : $58.49

HCSS-05-S-08.27-01

Samtec Inc

RoHS : Compliant

5,000 : $2.08
2,500 : $2.13
1,000 : $2.56
500 : $2.75
250 : $3.06
100 : $3.29
50 : $3.3
10 : $4.06

HCSS-10-D-08.27-01-N-S04

Samtec Inc

RoHS : Compliant

2,500 : $4.27
1,000 : $4.81
500 : $5.79
250 : $6.22
100 : $6.78
50 : $7.45
25 : $7.47
5 : $9.19

HTSW-108-27-F-Q

Samtec Inc

RoHS : Compliant

7,500 : $0.974
5,000 : $1.0
2,500 : $1.301
1,000 : $1.425
500 : $1.971
250 : $2.03
100 : $2.125
10 : $2.615

HTSW-108-27-SM-S

Samtec Inc

RoHS : Compliant

7,500 : $0.771
5,000 : $0.773
2,500 : $1.014
1,000 : $1.143
500 : $1.522
250 : $1.567
100 : $1.641
25 : $2.019

Neutron USA

09200030827

HARTING Technology Group

Heavy Duty Power Connectors BULKHEAD MOUNTING ANGLED HAN 3A 1 LVR
RoHS : Compliant

1 : $102.75

5082-7620

Broadcom Limited

LED Displays & Accessories Yellow CA LDP 7 Segment
RoHS : Compliant

1 : $182.6

0827040.ZXISOP

Littelfuse Inc

Cartridge Fuses 40A, 800VDC, Through hole, AEC-Q200
RoHS : Compliant

1 : $94.99

5082-7610

Broadcom Limited

LED Displays & Accessories Red CA LDP 7 Segment
RoHS : Compliant

1 : $182.6

0827040.UXTHP

Littelfuse Inc

Cartridge Fuses 40A, 800VDC, Bolt Down, AEC-Q200
RoHS : Compliant

1 : $94.99

09360082732

HARTING Technology Group

Heavy Duty Power Connectors 8P Female Insert HAN 8D QUICK LOCK
RoHS : Compliant

1 : $95.29

1241.1082.7

Schurter Electronic Components

Pushbutton Switches MTG 1/2" VKA SW SCHWARZ - 13.0
RoHS : Compliant

1 : $29.99

108273

Basler AG

Cameras & Camera Modules The daA3840-45uc (No-Mount) USB 30 camera with the IMX334 CMOS sensor delivers 45 frames per second at 83 MP resolution This model has no mount

1 : $444.99

1308270000

Weidmüller Interface GmbH & Co. KG

Interface Modules RS 16AIO DP SD Z
RoHS : Compliant

1 : $339.99

5082-7613

Broadcom Limited

LED Displays & Accessories Red CC RDP 7 Segment
RoHS : Compliant

1 : $182.6

5082-7653-DE000

Broadcom Limited

LED Displays & Accessories Red CC RDP 7 Segment
RoHS : Compliant

1 : $153.82

108271

Basler AG

Cameras & Camera Modules daA3840-45um (S-Mount) USB 3.0 camera with CMOS sensor 8.3 MP resolution.

1 : $444.99

108274

Basler AG

Cameras & Camera Modules daA3840-45uc (S-Mount) USB 30 camera with the Sony IMX334 CMOS sensor delivers 45 frames per second at 8.3 MP resolution This model comes with a S-mount
RoHS : Compliant

1 : $449.99

108272

Basler AG

Cameras & Camera Modules The daA3840-45um (CS-Mount) USB 3.0 camera with the IMX334 CMOS sensor delivers 45 frames per second at 8.3 MP resolution. This model comes with a CS-Mount.

1 : $449.99

0827120

Phoenix Contact

Wire Identification UC-WMCO 2,1 (12X3)
RoHS : Compliant

1 : $79.55

Pasternack Enterprises US

PE3C10827

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm. Smooth Bore Mini SMP Male to SMPS Female VITA 67.3 Cable Using PE-P047HF Coax., Pasternack’s PE3C10827 VITA 67.3 mini SMP male to SMPS female RF cable assembly using PE-P047HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP male to SMPS female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMPS cable assembly orders will ship the same business day as well. Pasternack RF coax VITA 67.3 cable assembly is built with a mini SMP cable connection on one end and an SMPS cable connection on the other. Our mini SMP to SMPS cable assembly has a male gender on end 1 and a female on end 2. PE3C10827 can also be known as a VITA 67.3 mini SMP plug to SMPS jack cable assembly and will be shipped the same day as it is purchased. This high flex RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. Our VITA 67.3 cable is designed for use in high-density RF signal transmission applications in aerospace and defense, ground communication systems, radar systems, satellites, and embedded computing applications. This cable assembly employs durable and flexible materials, and with a 0.1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10827 RF cable has an FEP jacket of 0.060-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. The high flex RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP male to SMPS female cable has a maximum VSWR of 1.4:1. This PE3C10827 mini SMP plug to SMPS jack cable assembly is built with PE-P047HF, which is a high flex coax type. The Pasternack high flex mini SMP cable assembly is manufactured with mini SMP to SMPS cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this VITA 67.3 RF cable are available on our downloadable PDF datasheet. PE3C10827 can also be used in the other direction and will be an SMPS female to mini SMP male cable assembly if the opposite connectivity is required. This VITA 67.3 mini SMP plug to SMPS jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMPS cable assembly for quick shipment worldwide. Variations of mini SMP and SMPS cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMPS VITA 67.3 RF cable assembly as per your requirements.

PE3C10827-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. Smooth Bore Mini SMP Male to SMPS Female VITA 67.3 Cable 9 Inch Length Using PE-P047HF Coax., Pasternack’s PE3C10827-9 VITA 67.3 mini SMP male to SMPS female RF cable assembly using PE-P047HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP male to SMPS female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMPS cable assembly orders will ship the same business day as well. Pasternack RF coax VITA 67.3 cable assembly is built with a mini SMP cable connection on one end and an SMPS cable connection on the other. Our mini SMP to SMPS cable assembly has a male gender on end 1 and a female on end 2. PE3C10827-9 can also be known as a VITA 67.3 mini SMP plug to SMPS jack cable assembly and will be shipped the same day as it is purchased. This high flex RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. Our VITA 67.3 cable is designed for use in high-density RF signal transmission applications in aerospace and defense, ground communication systems, radar systems, satellites, and embedded computing applications. This cable assembly employs durable and flexible materials, and with a 0.1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10827-9 RF cable has an FEP jacket of 0.060-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. The high flex RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP male to SMPS female cable has a maximum VSWR of 1.4:1. This PE3C10827-9 mini SMP plug to SMPS jack cable assembly is built with PE-P047HF, which is a high flex coax type. The Pasternack high flex mini SMP cable assembly is manufactured with mini SMP to SMPS cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 9-inch-long VITA 67.3 RF cable are available on our downloadable PDF datasheet. PE3C10827-9 can also be used in the other direction and will be an SMPS female to mini SMP male cable assembly if the opposite connectivity is required. This VITA 67.3 mini SMP plug to SMPS jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMPS cable assembly for quick shipment worldwide. Variations of mini SMP and SMPS cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMPS VITA 67.3 RF cable assembly as per your requirements.

1 : $264.47
25 : $251.25
50 : $238.02
100 : $227.44

PE3C10827-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Smooth Bore Mini SMP Male to SMPS Female VITA 67.3 Cable 18 Inch Length Using PE-P047HF Coax., Pasternack’s PE3C10827-18 VITA 67.3 mini SMP male to SMPS female RF cable assembly using PE-P047HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP male to SMPS female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMPS cable assembly orders will ship the same business day as well. Pasternack RF coax VITA 67.3 cable assembly is built with a mini SMP cable connection on one end and an SMPS cable connection on the other. Our mini SMP to SMPS cable assembly has a male gender on end 1 and a female on end 2. PE3C10827-18 can also be known as a VITA 67.3 mini SMP plug to SMPS jack cable assembly and will be shipped the same day as it is purchased. This high flex RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. Our VITA 67.3 cable is designed for use in high-density RF signal transmission applications in aerospace and defense, ground communication systems, radar systems, satellites, and embedded computing applications. This cable assembly employs durable and flexible materials, and with a 0.1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10827-18 RF cable has an FEP jacket of 0.060-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. The high flex RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP male to SMPS female cable has a maximum VSWR of 1.4:1. This PE3C10827-18 mini SMP plug to SMPS jack cable assembly is built with PE-P047HF, which is a high flex coax type. The Pasternack high flex mini SMP cable assembly is manufactured with mini SMP to SMPS cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 18-inch-long VITA 67.3 RF cable are available on our downloadable PDF datasheet. PE3C10827-18 can also be used in the other direction and will be an SMPS female to mini SMP male cable assembly if the opposite connectivity is required. This VITA 67.3 mini SMP plug to SMPS jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMPS cable assembly for quick shipment worldwide. Variations of mini SMP and SMPS cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMPS VITA 67.3 RF cable assembly as per your requirements.

1 : $282.31
25 : $268.19
50 : $254.08
100 : $242.79

PE3W08275/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMA Male Low Loss Cable Using LMR-195 Coax with HeatShrink., Radio frequency assembly N female bulkhead to SMA male low loss cable using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to SMA male low loss cable using LMR-195 coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and SMA cable connection on the other. Our low loss N type to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W08275/HS can also be known as a low loss N type jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N jack to SMA plug cable assembly PE3W08275/HS is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08275/HS can also be used in the other direction and will be SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss N type jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SMA male low loss cable using LMR-195 coax with heatshrink.

PE3W08272

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. MCX Plug to SMA Male Right Angle Cable Using PE-SR405FL Coax. PE3W08272 is a MCX plug to SMA male right angle cable using PE-SR405FL coax. This Pasternack MCX plug to SMA male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. MCX to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX to male SMA right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W08272 MCX plug to SMA male right angle cable assembly is constructed with PE-SR405FL coax.

PE3W10827

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male Right Angle to SMA Female Bulkhead Cable Using RG142 Coax. PE3W10827 is a reverse polarity TNC male right angle to SMA female bulkhead cable using RG142 coax. This Pasternack reverse polarity TNC male right angle to SMA female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male TNC right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10827 TNC reverse polarity male right angle to SMA female bulkhead cable assembly is constructed with RG142 coax.

PE3W08278

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm. N Male to N Female Cable Using LMR-600-DB Coax. PE3W08278 is a N male to N female cable using LMR-600-DB coax. This Pasternack N male to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08278 N male to N female cable assembly is constructed with LMR-600-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W08273

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 2.4mm Female to SMA Male Right Angle Cable Using RG405 Coax. PE3W08273 is a 2.4mm female to SMA male right angle cable using RG405 coax. This Pasternack 2.4mm female to SMA male right angle cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm SMA for connector 2. 2.4mm to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female 2.4mm to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08273 2.4mm female to SMA male right angle cable assembly is constructed with RG405 coax.

PE3C0827

Pasternack Enterprises

Key Specifications, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. UMCX Plug Right Angle to Reverse Polarity SMA Female Bulkhead Cable Using RG178 Coax. PE3C0827 is a to reverse polarity SMA female bulkhead cable using RG178 coax. This Pasternack to reverse polarity SMA female bulkhead cable assembly uses a for connector 1 and a 50 Ohm SMA for connector 2. Our to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0827 to SMA reverse polarity female bulkhead cable assembly is constructed with RG178 coax.

PE3W00827LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to SMA Male Right Angle Cable Using RG142 Coax with HeatShrink, LF Solder. PE3W00827LF/HS is a MCX plug right angle to SMA male right angle cable using RG142 coax. This Pasternack MCX plug right angle to SMA male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. MCX right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00827LF/HS MCX plug right angle to SMA male right angle cable assembly is constructed with RG142 coax.

PE3W08275/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female Bulkhead to SMA Male Low Loss Cable 12 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly N female bulkhead to SMA male low loss cable 12 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to SMA male low loss cable 12 inch length using LMR-195 coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W08275/HS-12 can also be known as a low loss type N jack to SMA plug cable assembly and will be shipped same-day as it is purchased. N type jack to SMA plug cable assembly PE3W08275/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this N type female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08275/HS-12 can also be used in the other direction and will be SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SMA male low loss cable 12 inch length using LMR-195 coax with heatshrink.

1 : $107.99
25 : $102.59
50 : $97.19
100 : $92.87

PE3W08271

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. N Male to SHV Jack Bulkhead Cable Using RG223 Coax., Radio frequency assembly N male to SHV jack bulkhead cable using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to SHV jack bulkhead cable using RG223 coax, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and SHV bulkhead cable connection on the other. Our type N to SHV cable assemblies have a male gender on end 1 and jack on end 2. PE3W08271 can also be known as a N type plug to SHV female cable assembly and will be shipped same-day as it is purchased. Type N plug to SHV female cable assembly PE3W08271 is built with RG223 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08271 can also be used in the other direction and will be SHV jack bulkhead to type N male cable assembly if the opposite connectivity is required. N type plug to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SHV cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SHV jack bulkhead cable using RG223 coax.

PE3W08275/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Female Bulkhead to SMA Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly N female bulkhead to SMA male low loss cable 36 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to SMA male low loss cable 36 inch length using LMR-195 coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type bulkhead cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W08275/HS-36 can also be known as a low loss type N jack to SMA plug cable assembly and will be shipped same-day as it is purchased. N type jack to SMA plug cable assembly PE3W08275/HS-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08275/HS-36 can also be used in the other direction and will be SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss N type jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SMA male low loss cable 36 inch length using LMR-195 coax with heatshrink.

1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15

PE3W08275/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female Bulkhead to SMA Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly N female bulkhead to SMA male low loss cable 24 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to SMA male low loss cable 24 inch length using LMR-195 coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type bulkhead cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W08275/HS-24 can also be known as a low loss type N jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N jack to SMA plug cable assembly PE3W08275/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08275/HS-24 can also be used in the other direction and will be SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss N type jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SMA male low loss cable 24 inch length using LMR-195 coax with heatshrink.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE3W08274

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SSMC Plug to SSMC Plug Cable Using RG174 Coax. PE3W08274 is a SSMC plug to SSMC plug cable using RG174 coax. This Pasternack SSMC plug to SSMC plug cable assembly uses a 50 Ohm SSMC for connector 1 and a 50 Ohm SSMC for connector 2. Our plug SSMC to plug SSMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08274 SSMC plug to SSMC plug cable assembly is constructed with RG174 coax.

TE Connectivity

350827-1

TE Connectivity

06P UMNL HDR ASSY PC 94VO PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 350827-1 | Internal Number: 350827-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.31
100 : $1.76
10 : $2.17
1 : $2.74

6,779

1-2308272-4

TE Connectivity

CABLE CLAMP4 (CASE RAW) Strain Relief Accessory Type: Cable Clamp Kit Primary Product Material: Zinc Compatible With Connector Shell Size: 1 Shielded: Yes Thread Size: M2.5 Cable Clamp Kit Zinc 1 | Cable Clamp For Size 1-3 Std/1-4 Ql Shell | Part Number: 1-2308272-4 | Internal Number: 1-2308272-4 | TE Connectivity
RoHS : Compliant

25 : $26.71
10 : $28.77
1 : $30.82

281

787082-7

TE Connectivity

68 50SR R/A RCPT ASSY,REDESIGN D-Shaped Connector | Part Number: 787082-7 | Internal Number: 787082-7 | TE Connectivity
RoHS : Compliant

1,000 : $8.92
500 : $9.17
250 : $9.46
100 : $9.78
50 : $10.06
1 : $11.04

262

350827-4

TE Connectivity

06P UMNL HDR ASSY PC 94VO LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 350827-4 | Internal Number: 350827-4 | TE Connectivity
RoHS : Compliant

1,000 : $3.69
100 : $4.58
25 : $4.83
10 : $5.59
1 : $6.23

207

1-2308272-7

TE Connectivity

CABLE CLAMP7 (CASE RAW) Strain Relief Accessory Type: Cable Clamp Kit Primary Product Material: Zinc Compatible With Connector Shell Size: 5 Shielded: Yes Thread Size: M2.5 Cable Clamp Kit Zinc 5 | Cable Clamp For Size 4-5 Std/5Ql Shell | Part Number: 1-2308272-7 | Internal Number: 1-2308272-7 | TE Connectivity
RoHS : Compliant

25 : $26.71
10 : $28.77
1 : $30.82

155

1-2308272-3

TE Connectivity

CABLE CLAMP3 (CASE RAW) Strain Relief Accessory Type: Cable Clamp Kit Primary Product Material: Zinc Compatible With Connector Shell Size: 1 Shielded: Yes Thread Size: M2.5 Cable Clamp Kit Zinc 1 | Cable Clamp For Size 1-3 Std/1-4 Ql Shell | Part Number: 1-2308272-3 | Internal Number: 1-2308272-3 | TE Connectivity
RoHS : Compliant

25 : $26.71
10 : $28.77
1 : $30.82

1-2308273-2

TE Connectivity

QL-SET VARA W/STP MO FOR COMBLOCK 440UNC Connector Hardware Accessory Type: Quick Lock Pins Operating Temperature (Max): 194 °F Operating Temperature (Max): 90 °C Operating Temperature Range: -40 – 194 °F Operating Temperature Range: -40 – 90 °C Quick Lock Pins 194 °F | Quick Lock Pins For D-Sub Backshell | Part Number: 1-2308273-2 | Internal Number: 1-2308273-2 | TE Connectivity
RoHS : Compliant

25 : $18.0
10 : $19.39
1 : $20.78

1-2308272-1

TE Connectivity

CABLE CLAMPS (CASE RAW) Strain Relief Accessory Type: Cable Clamp Kit Primary Product Material: Zinc Compatible With Connector Shell Size: 1 Shielded: Yes Thread Size: M2.5 Cable Clamp Kit Zinc 1 | Cable Clamp For Size 1-3 Std/1-4 Ql Shell | Part Number: 1-2308272-1 | Internal Number: 1-2308272-1 | TE Connectivity
RoHS : Compliant

25 : $25.23
10 : $27.17
1 : $29.11

1-2308272-5

TE Connectivity

CABLE CLAMP5 (CASE RAW) Strain Relief Accessory Type: Cable Clamp Kit Primary Product Material: Zinc Compatible With Connector Shell Size: 5 Shielded: Yes Thread Size: M2.5 Cable Clamp Kit Zinc 5 | Cable Clamp For Size 4-5 Std/5Ql Shell | Part Number: 1-2308272-5 | Internal Number: 1-2308272-5 | TE Connectivity
RoHS : Compliant

25 : $26.71
10 : $28.77
1 : $30.82

2342082-7

TE Connectivity

7POS HDR ST, HT, 5.00MM PITCH, TL 2.6MM Number of Positions: 7 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 7 Header Wire-to-Board .197" | Part Number: 2342082-7 | Internal Number: 2342082-7 | .197" | TE Connectivity
RoHS : Compliant

5,000 : $18.49
2,500 : $18.94
1,000 : $19.4
500 : $19.85
250 : $20.3
100 : $20.75
50 : $21.2
25 : $21.65
10 : $22.1
1 : $22.55

1-2308272-6

TE Connectivity

CABLE CLAMP6 (CASE RAW) Strain Relief Accessory Type: Cable Clamp Kit Primary Product Material: Zinc Compatible With Connector Shell Size: 5 Shielded: Yes Thread Size: M2.5 Cable Clamp Kit Zinc 5 | Cable Clamp For Size 4-5 Std/5Ql Shell | Part Number: 1-2308272-6 | Internal Number: 1-2308272-6 | TE Connectivity
RoHS : Compliant

25 : $26.71
10 : $28.77
1 : $30.82

1-2308273-1

TE Connectivity

QL-SET VAR A W/STP MO FOR COMBLOCK M3THD Connector Hardware Accessory Type: Quick Lock Pins Operating Temperature (Max): 194 °F Operating Temperature (Max): 90 °C Operating Temperature Range: -40 – 194 °F Operating Temperature Range: -40 – 90 °C Quick Lock Pins 194 °F | Quick Lock Pins For D-Sub Backshell | Part Number: 1-2308273-1 | Internal Number: 1-2308273-1 | TE Connectivity
RoHS : Compliant

25 : $17.16
10 : $18.48
1 : $19.8

2405082-7

TE Connectivity

40 AHV D FP Ahv | Part Number: 2405082-7 | Internal Number: 2405082-7 | TE Connectivity
RoHS : Compliant

1 : $1,022.03

208273-2

TE Connectivity

SKT ASSY, SZ 12 Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Size: 14 – 12 AWG Wire Size: 2 – 3 mm² Contact Retention Within Housing: With Gold (Au) Socket 14 – 12 AWG 2 – 3 mm² | Connector Contact | Part Number: 208273-2 | Internal Number: 208273-2 | TE Connectivity
RoHS : Compliant

1 : $22.43

1-2405082-7

TE Connectivity

250 AHV D FP Ahv | Part Number: 1-2405082-7 | Internal Number: 1-2405082-7 | TE Connectivity
RoHS : Compliant

1 : $4,690.82