| データシートサーチシステム |
|
0SP-2C0-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() TME | 100SP1T2B4M6QE | E-Switch Inc | Switch: toggle; Pos: 2; SPDT; ON-ON; 2A/250VAC; 5A/28VDC; -30÷85°C RoHS : Compliant |
| 208 | |
| 4C.02.8.230.0060SPA | FINDER SpA | Relay: interface; Ucoil: 230VAC; DPDT; 15A; 8A/250VAC; 8A/24VDC RoHS : Compliant |
| 111 | ||
| 100SP1T1B1M2QEH | E-Switch Inc | Switch: toggle; Pos: 2; SPDT; ON-ON; 2A/250VAC; 5A/28VDC; -30÷85°C RoHS : Compliant |
| 48 | ||
| 100SP1T1B2M6QE | E-Switch Inc | Switch: toggle; Pos: 2; SPDT; ON-ON; 2A/250VAC; 5A/28VDC; 100; copper RoHS : Compliant |
| 0 | ||
| 100SP1T2B2M7RE | E-Switch Inc | Switch: toggle; Pos: 2; SPDT; ON-ON; 0.02A/20VAC; 0.02A/20VDC; 100 RoHS : Compliant |
| 0 | ||
| 100SP1T2B9M1QE | E-Switch Inc | Switch: toggle; Pos: 2; SPDT; ON-ON; 2A/250VAC; 5A/28VDC; 100; copper RoHS : Compliant |
| 0 | ||
| 100SP1T6B11M1REH | E-Switch Inc | Switch: toggle; Pos: 2; SPDT; ON-ON; 0.02A/20VAC; 0.02A/20VDC; 100 RoHS : Compliant |
| 0 | ||
| 100SP2T6B11M2QE | E-Switch Inc | Switch: toggle; Pos: 2; SPDT; ON-(ON); 2A/250VAC; 5A/28VDC; 100; THT RoHS : Compliant |
| 0 | ||
| 100SP3T1B4M7QE | E-Switch Inc | Switch: toggle; Pos: 3; SP3T; ON-OFF-ON; 2A/250VAC; 5A/28VDC; 100 RoHS : Compliant |
| 0 | ||
| 100SP3T2B4VS2QE | E-Switch Inc | Switch: toggle; Pos: 3; SP3T; ON-OFF-ON; 2A/250VAC; 5A/28VDC; 100 |
| 0 | ||
| 100SP3T8B13M1QE | E-Switch Inc | Switch: toggle; Pos: 3; SP3T; ON-OFF-ON; 2A/250VAC; 5A/28VDC; 100 RoHS : Compliant |
| 0 | ||
| 300SP1J3VS2QE | E-Switch Inc | ROCKER; SPDT; ON-ON; 5A/120VAC; 5A/28VDC; black; 300; Leads: for PCB |
| 0 | ||
| 300SP2R7BLKM1QEBLK | E-Switch Inc | ROCKER; SPDT; ON-(ON); 5A/120VAC; 5A/28VDC; black; 300; 15.2x12.7mm |
| 0 | ||
| 300SP3J1GRYM7RE | E-Switch Inc | ROCKER; SP3T; Pos: 3; ON-OFF-ON; 0.02A/20VAC; 20mA/20VDC; grey; 300 |
| 0 | ||
| 300SP4R7REDM1QEBLK | E-Switch Inc | ROCKER; SPDT; (ON)-OFF-(ON); 5A/120VAC; 5A/28VDC; red; 300; silver RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | LT8650SPJV#TRPBF | Analog Devices Inc | Dual Channel 6A, 42V, Synchron RoHS : Compliant |
| 888 | |
| LT8650SPJV#PBF | Analog Devices Inc | Dual Channel 6A, 42V, Synchron RoHS : Compliant |
| 0 | ||
| LT8650SPJV#WPBF | Analog Devices Inc | Dual Channel 6A, 42V, Synchron RoHS : Compliant |
| 0 | ||
| LT8650SPJV#WTRPBF | Analog Devices Inc | Dual Channel 6A, 42V, Synchron RoHS : Compliant |
| 0 | ||
![]() STMicroelectronics | VNQ660SPTR-E | STMicroelectronics | QUAD CHANNEL HIGH SIDE SOLID STATE RELAY RoHS : Compliant |
| 1,889 | |
VND600SPTR-E![]() | STMicroelectronics | DOUBLE CHANNEL HIGH SIDE SOLID STATE RELAY RoHS : Compliant |
| 968 | ||
VN340SPTR-33-E![]() | STMicroelectronics | Quad high side smart power solid state relay RoHS : Compliant |
| 770 | ||
VN340SP-E![]() | STMicroelectronics | _ RoHS : Compliant |
| 40 | ||
VN920SPTR-E![]() | STMicroelectronics | SINGLE CHANNEL HIGH SIDE SOLID STATE RELAY RoHS : Compliant |
| 4 | ||
VND830SP-E![]() | STMicroelectronics | DOUBLE CHANNEL HIGH SIDE DRIVER RoHS : Compliant |
| 0 | ||
VN540SP-E![]() | STMicroelectronics | Single high-side smart power solid state relay RoHS : Compliant |
| 0 | ||
VN540SPTR-E![]() | STMicroelectronics | Single high-side smart power solid state relay RoHS : Compliant |
| 0 | ||
VN330SP-E![]() | STMicroelectronics | _ RoHS : Compliant |
| 0 | ||
VN330SPTR-E![]() | STMicroelectronics | Quad high side smart power solid state relay RoHS : Compliant |
| 0 | ||
VN920SP-E![]() | STMicroelectronics | SINGLE CHANNEL HIGH SIDE SOLID STATE RELAY RoHS : Compliant |
| 0 | ||
VNQ690SPTR-E![]() | STMicroelectronics | QUAD CHANNEL HIGH SIDE SOLID STATE RELAY RoHS : Compliant |
| 0 | ||
VND600SP-E![]() | STMicroelectronics | DOUBLE CHANNEL HIGH SIDE SOLID STATE RELAY RoHS : Compliant |
| 0 | ||
VNQ860SP-E![]() | STMicroelectronics | Quad channel high side driver RoHS : Compliant |
| 0 | ||
| VNQ660SP-E | STMicroelectronics | QUAD CHANNEL HIGH SIDE SOLID STATE RELAY RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | MIC5330-SPYML-TR | Microchip Technology Inc | Dual 300mA LDO, VDFN, Projected EOL: 2036-05-25 RoHS : Compliant |
| 14,000 | |
PIC16C62A-20/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 20MHZ 2K EPRM, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 2,925 | ||
PIC16C76-10/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 10MHZ 8K OTP, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 1,844 | ||
PIC16C63-20/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 20MHZ 4K EPRM, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 1,763 | ||
PIC16C73A-10/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 10MHZ 4K EPRM, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 1,440 | ||
PIC16C642-20/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 20MHZ 4K EPRM, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 1,425 | ||
PIC16C63-10/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 10MHZ 4K EPRM, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 1,380 | ||
PIC16C76-20/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 20MHZ 8K OTP, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 715 | ||
PIC16C73A-20/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 20MHZ 4K EPRM, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 664 | ||
PIC16C62B-20/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 20MHZ 2K EPRM, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 580 | ||
PIC16C72A-20/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 20MHZ 2K EPRM, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 205 | ||
PIC16C55A-20/SP![]() | Microchip Technology Inc | MCU CMOS 28LD .5K 20MHz, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 90 | ||
PIC16C66-20/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 20MHZ 8K OTP, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 45 | ||
PIC16F873-20/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 20MHZ 4K FLASH, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 45 | ||
BM20SPKA1NBC-0001AA![]() | Microchip Technology Inc | BLUETOOTH AUDIO MODULE; STEREO HEADSET/SPEAKER MODULE WITH ANALOG AUDIO OUTPUT., MODULE, Projected EOL: 2041-08-17 RoHS : Compliant |
| 41 | ||
![]() Bisco Industries | #10SPL ST C2 | WASHERS | 7,000 | |||
| 0.078X1.250SP 42 PS | PINS | 3,600 | ||||
| 0.156X0.500SP ST PL | PINS | 2,525 | ||||
| 0800.1780SPMSDSSQQP | MACHINE SCREWS | 1,973 | ||||
| 0.187X0.750SP ST PL | PINS | 1,362 | ||||
| 0.078X1.000SP SS PS | PINS | 472 | ||||
| M2X10SP ST PL | PINS | 472 | ||||
| 0.125X0.250SP ST ZC | PINS | 400 | ||||
| 0.093X1.500SP 42 PS | PINS | 320 | ||||
| 0.375X2.500SP ST PL | PINS | 200 | ||||
| 0.094X0.250SP BCP PL | PINS | 79 | ||||
| 4-40SP SS PL | NUTS | 50 | ||||
| 6X60SP SS PS | PINS | 46 | ||||
| 60SPG00002 | Micro Plastics Inc | 17 | ||||
| NL30SP | NORD-LOCK International AB | 6 | ||||
![]() Rochester Electronics | AR0237CSSC00SPRA0-DR | onsemi | Image Sensor Color CMOS 1920H x 1080V 2.1MP 48-QFN Tray RoHS : Compliant |
| 78 | |
| ASX340CS2C00SPED0-DPBR | onsemi | Image Sensor Color CMOS with Processor 720H x 560V 0.4MP 63-BGA Tray RoHS : Compliant |
| 1,020 | ||
| ASX340CS2C00SPED0-DRBR | onsemi | Image Sensor Color CMOS with Processor 728H x 560V 0.41MP 63-BGA Tray RoHS : Compliant |
| 5,200 | ||
| IR2130SPBF | Infineon Technologies AG | Half Bridge Based MOSFET Driver, 0.5A, MOS, PDSO28 RoHS : Compliant |
| 4,720 | ||
UC1710SP![]() | Texas Instruments | Gate Driver N-Channel, P-Channel MOSFET 1 Driver Low-Side 16-DIP Tube RoHS : Not Compliant |
| 41 | ||
| AR0130CSSC00SPCA0 | Aptina Imaging | CMOS Sensor, 1280 Horiz pixels, 960 Vert pixels, 45fps, -22-22mA, Square, Surface Mount RoHS : Compliant |
| 931 | ||
| ASX340CS2C00SPEDD3-E | Aptina Imaging | Image Sensor Color CMOS with Processor 728H x 560V 0.41MP 63-BGA RoHS : Compliant |
| 1 | ||
IRG4PC30SPBF![]() | International Rectifier | Insulated Gate Bipolar Transistor, 34A I(C), 600V V(BR)CES, N-Channel, TO-247AC RoHS : Compliant |
| 3 | ||
| HPC46083TXQ/V30/SP108663 | National Semiconductor Corporation | Microcontroller, 16-Bit, HPC CPU, 20MHz, CMOS, PQCC68 RoHS : Not Compliant |
| 455 | ||
M30620SPGP#U3C![]() | Renesas Electronics Corporation | IC MCU M16C/60 16Bit 1 Core ROMless 24MHz 100-QFP Tray RoHS : Compliant |
| 1,480 | ||
| R2A30280SP#WA | Renesas Electronics Corporation | Mixed Signal Motor Driver RoHS : Compliant |
| 5,000 | ||
| R2S15900SP#DF0Z | Renesas Electronics Corporation | Audio Signal Processor TV, Mini Stereo 28-SOIC RoHS : Not Compliant |
| 3,000 | ||
| R2S20020SP#U00G | Renesas Electronics Corporation | Analog Front-End IC for use in Smart Lithium Battery Systems RoHS : Compliant |
| 160 | ||
| R8A66150SP#D1 | Renesas Electronics Corporation | IC SPI 12 I/O 1.9MHz 2V - 6V 20-SOIC RoHS : Compliant |
| 23,566 | ||
| LD39130SPUR | STMicroelectronics | IC VOLT REG Adjustable 1 REG 800mV 300mA 6-SON T/R RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | 510SP250KG3 | KANTHL | AVAILABLE EU | 12 | ||
| DMPH6050SPDQ13 | Diodes Incorporated | AVAILABLE EU | 4,147 | |||
| SBR15A30SP513 | Diodes Incorporated | AVAILABLE EU | 5,715 | |||
![]() ComSIT USA | VND830SPTRE | STMicroelectronics | Buffer/Inverter Based Peripheral Driver, 2 Driver, 9A, PDSO10 RoHS : Compliant | 32,153 | ||
6TQ040SPBF![]() | Vishay Intertechnologies | Rectifier Single Schottky 40V 6A TO-263-3 Tube RoHS : Compliant | 24,275 | |||
| IRFBE30SPBF | Vishay Intertechnologies | POWER MOSFET Power Field-Effect Transistor, 4.1A I(D), 800V, 3ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 20,000 | |||
| HUE20SP000555572HUE20XUMA1 | Infineon Technologies AG | IGBT Module, high-voltage, high-current, for motor control and power switching applications RoHS : Compliant | 4,000 | |||
IRF620SPBF![]() | Vishay Intertechnologies | POWER MOSFET Power Field-Effect Transistor, 5.2A I(D), 200V, 0.8ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB RoHS : Compliant | 2,850 | |||
IR2130SPBF![]() | International Rectifier | 3-PHASE BRIDGE DRIVER Half Bridge Based MOSFET Driver, 0.5A, MOS, PDSO28 RoHS : Compliant | 2,225 | |||
| EEEFK1V680SPX | Panasonic Electronic Components | ALUMINUM ELECTROLYTIC CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 68uF, Surface Mount, 2626 RoHS : Compliant | 2,000 | |||
| BLM41P750SPTM0003 | Murata Manufacturing Co Ltd | SURFACE MOUNT CHIP FERRITE BEADS EMI FILTER Ferrite Chip, 1 Function(s), 3A, 2 Pin(s) RoHS : Compliant | 1,600 | |||
| VN340SPTRE | STMicroelectronics | Buffer/Inverter Based Peripheral Driver, 4 Driver, PDSO10 RoHS : Compliant | 600 | |||
IR2110SPBF![]() | International Rectifier | HIGH AND LOW SIDE DRIVER Half Bridge Based MOSFET Driver, 2.5A, CMOS, PDSO16 RoHS : Compliant | 455 | |||
IRG4PC40SPBF![]() | International Rectifier | Insulated Gate Bipolar Transistor, 60A I(C), 600V V(BR)CES, N-Channel, TO-247AC RoHS : Compliant | 325 | |||
IRF730SPBF![]() | Vishay Intertechnologies | Power MOSFET Power Field-Effect Transistor, 5.5A I(D), 400V, 1ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB RoHS : Compliant | 300 | |||
VN610SP![]() | STMicroelectronics | Buffer/Inverter Based Peripheral Driver, 1 Driver, PDSO10 RoHS : Not Compliant | 183 | |||
| PIC16C6620SP | mct | RISC Microcontroller, 8-Bit, EPROM, PIC16 CPU, 20MHz, CMOS, PDIP28 RoHS : Compliant | 15 | |||
| GA200HS60SPBF | Vishay Intertechnologies | STANDARD SPEED HALF-BRIDGE IGBT INT-A-PAK Insulated Gate Bipolar Transistor, 470A I(C), 600V V(BR)CES, N-Channel RoHS : Compliant | 13 | |||
![]() GLYN GmbH & Co. KG | GATW70SPBB1RD | Solomon Goldentek Display Corp | TFT 7.00", 800x480, 440cd, RGB (TTL), 4-wire res. | 36 | ||
![]() NexGen Digital | VNQ660SPTR-E | STMicroelectronics | RoHS : Compliant | 1,800 | ||
PIC16C66-20/SP![]() | Microchip Technology Inc | RoHS : Compliant | 1,000 | |||
PIC16C63-20/SP![]() | Microchip Technology Inc | RoHS : Compliant | 795 | |||
| 10SP020 | Mountain Switch | 335 | ||||
| VN610SP-E | 10 | |||||
![]() PUI | CPDZC5V0SPC-HF | 10,000 | ||||
| 2047-2X12G30SP3U | 5,512 | |||||
| 940-SP-3066 | 3,000 | |||||
| CPDA10R5V0SP-HF | 3,000 | |||||
| 2047-2X15G30SP1U | 2,332 | |||||
| 2042-2X04G00SPB | 1,990 | |||||
| 4973-16C30SPA-V0 | 672 | |||||
| 8406-C36C30SP-2PA | 200 | |||||
| 4973-04C30SPA-V0 | 176 | |||||
| 4973-06C30SPA-V0 | 144 | |||||
| 3012-20C00SPBA-D | 120 | |||||
| 3012-14C00SPBA-D | 35 | |||||
![]() Chip 1 Exchange | AP64100SP-13 | Diodes Incorporated | INSTOCK RoHS : Compliant | 3,724 | ||
| ECEV1VA220SP | Panasonic Electronic Components | INSTOCK RoHS : Not Compliant | 3,578 | |||
| ECEV1VA220SP | INSTOCK | 2,580 | ||||
| BLM31A260SPTM00-03 | Murata Manufacturing Co Ltd | INSTOCK | 1,299 | |||
| ECEV1CA470SP | Panasonic Electronic Components | INSTOCK RoHS : Not Compliant | 927 | |||
BM20SPKA1NBC-0001AA![]() | Microchip Technology Inc | INSTOCK RoHS : Compliant | 583 | |||
| ECEV1CA470SP | INSTOCK | 332 | ||||
| PIC16C73B-20/SP | INSTOCK | 266 | ||||
| SF-2410SP125W-2 | Bourns Inc | INSTOCK RoHS : Compliant | 166 | |||
PIC16C73B-20/SP![]() | Microchip Technology Inc | INSTOCK RoHS : Compliant | 163 | |||
PIC16C66-20/SP![]() | Microchip Technology Inc | INSTOCK RoHS : Compliant | 150 | |||
| PIC16C66-20/SP | Motorola Semiconductor Products | INSTOCK | 149 | |||
| 30CTQ060SPBF | INSTOCK | 84 | ||||
| PIC16C76-20/SP | INSTOCK | 12 | ||||
| PIC16F876-20/SP | INSTOCK | 12 | ||||
![]() Avnet Asia | LL110-10SP-10SP-150-1-02 | Samtec Inc | (Alt: LL110-10SP-10SP-150-1-02) RoHS : Compliant | 0 | ||
| DMPH6050SPD-13 | Diodes Incorporated | (Alt: DMPH6050SPD-13) RoHS : Compliant | 0 | |||
| AP64350SP-13 | Diodes Incorporated | DC/DC Switching Regulator, Adjustable, Synchronous Buck (Step Down), Single Output, 800 mV to 40 V (Alt: AP64350SP-13) RoHS : Compliant | 0 | |||
| RQ6L020SPTCR | ROHM Semiconductor | Transistor Signal MOSFET P-CH 60V 2A 6-Pin SOT-457T Emboss T/R (Alt: RQ6L020SPTCR) RoHS : Compliant | 0 | |||
| SBRT15U100SP5-13 | Diodes Incorporated | Schottky Rectifier, 100 V, 15 A, Single, PowerDI 5, 3 Pins, 700 mV (Alt: SBRT15U100SP5-13) RoHS : Compliant | 0 | |||
| SBRT15U50SP5-13D | Diodes Incorporated | (Alt: SBRT15U50SP5-13D) RoHS : Compliant | 0 | |||
| LPJ-60SP | Eaton Corporation | (Alt: LPJ-60SP) RoHS : Compliant | 0 | |||
| SBR15A30SP5-13 | Diodes Incorporated | Schottky Rectifier, 30 V, 15 A, Single, PowerDI 5, 3 Pins, 590 mV (Alt: SBR15A30SP5-13) RoHS : Compliant |
| 0 | ||
| B0-SP10NIA300S705-LM00F98T-/7/ | MACOM | MCMB0-SP10NIA300S705-LM00F98T-/7/ FLOWNP (Alt: B0-SP10NIA300S705-LM00F98T-/7/) RoHS : Compliant | 0 | |||
| EEE1EA220SP | Panasonic Electronic Components | (Alt: EEE1EA220SP) RoHS : Compliant | 0 | |||
| AP64100SP-13 | Diodes Incorporated | (Alt: AP64100SP-13) RoHS : Compliant | 0 | |||
IRF620SPBF![]() | Vishay Intertechnologies | (Alt: IRF620SPBF) RoHS : Compliant | 0 | |||
| SBR15U50SP5-13 | Diodes Incorporated | (Alt: SBR15U50SP5-13) RoHS : Compliant |
| 0 | ||
| SBRT20U60SP5-7 | Diodes Incorporated | Schottky Rectifier, 60 V, 20 A, Single, PowerDI 5, 3 Pins, 530 mV (Alt: SBRT20U60SP5-7) RoHS : Compliant |
| 0 | ||
| M30620SPGP#33C | Renesas Electronics Corporation | (Alt: M30620SPGP#33C) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | 108-00019-050-SP | Silex Technology America Inc | (Sample Pack) Prestta WLAN Antenna - 6 Piece Sample Pack, Isolated Magnetic Dipole (IMD) stamped metal antenna for use with SX-SDCAG, SX-SDMGN/SX-SDMAN, and SX-560/SX-570/SX-580 |
| 0 | |
| KG100S-PK6130A | Silicon Laboratories Inc |
| 0 | |||
| SX-SDPAC-2830-SP | Silex Technology America Inc | [Sample Pack] 802.11a/b/g/n/ac SDIO System-in-Package (SiP). |
| 0 | ||
| SX-590-2700-SP-WWR | Silex Technology America Inc | SX-590-2700-WWR:(Sample Pack) Internal Serial or Ethernet to 802.11a/b/g/n/ac wireless module |
| 0 | ||
| SX-SDCAC-2830-SP | Silex Technology America Inc | Multiprotocol Modules 1x1 Wi-Fi+BLE radio /basbnd SDIO EvalMod |
| 0 | ||
| SX-ULPGN-BTZ-2000-SP | Silex Technology America Inc | [Sample Pack] The SX-ULPGN-BTZ-2000-SP sample pack contains three individual radios to allow small production quantities for prototyping. The Silex SX-ULPGN-BTZ is a highly integrated IoT SoC based on |
| 0 | ||
![]() Component Electronics, Inc | BLM31P500SPTM00-03 | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 5,892 | |
| BLM21P300SPT | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,786 | ||
PIC16C72-10/SP![]() | Microchip Technology Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,600 | ||
| BLM31A700SPT | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,430 | ||
| BLM31A260SPTM00-03 | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 920 | ||
| VERSAFIT-3/4-0-SP-SM | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant | 200 | |||
| 800SP9B5M2QEH | E-Switch Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 73 | ||
| LPJ-30SP | Eaton Bussmann | IN STOCK SHIP TODAY RoHS : Unknown |
| 50 | ||
| VERSAFIT-3/16-0-SP | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 30 | ||
VN540SP![]() | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 20 | ||
| LPJ-110SP | Eaton Bussmann | IN STOCK SHIP TODAY RoHS : Unknown |
| 10 | ||
| LPJ-60SP | Eaton Bussmann | IN STOCK SHIP TODAY RoHS : Unknown |
| 10 | ||
| LPJ-200SP | Eaton Bussmann | IN STOCK SHIP TODAY RoHS : Unknown |
| 10 | ||
| SBH31-NBPB-D10-SP-BK | Sullins Connector Solutions | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| PKB30SPC-2001 | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 3 | ||
![]() DB Roberts | M2.5X10-SP-SS | PIN | SPRING PIN SS M2.5X10-SP-SS |
| 500 | |
| PINM1.5X10-SP-SS | PIN |
| 235 | |||
| CL-20-SPN-1 | Carr Lane Manufacturing Co Inc | SPRING PLUNGER-STL DELRIN NOSE |
| 80 | ||
| 60SPG00002 | Essentra Components | GROMMET NUT, .270X.290 HOLE, . | 0 | |||
| 60SPG00001 | Essentra Components | GROMMET NUT, .270X.290 HOLE, . | 0 | |||
| VMC30SP-M3-1 | PennEngineering (PEM) | 39-Varimount | 0 | |||
| 60SPG00004 | Essentra Components | GROMMET NUT, .270X.290 HOLE, . | 0 | |||
| 60SPG00006B | Essentra Components | GROMMET NUT, .270X.290 HOLE, . | 0 | |||
| 4516-440-S-PL-12 | RAF Electronic Hardware | 0 | ||||
| VMC30SP-832-1 | PennEngineering (PEM) | 39-Varimount | 0 | |||
| 2100-SPARE KEY | Sugatsune Kogyo Co Ltd | SPARE KEY FOR 2100 | 0 | |||
| VMC30SP-M5-1 | PennEngineering (PEM) | 39-Varimount | 0 | |||
| TU-SM10SPO35ZT | SHEREX FASTENING SO | 0 | ||||
| 60SPG00006 | Essentra Components | GROMMET NUT, .270X.290 HOLE, . | 0 | |||
| VMC30SP-032-1 | PennEngineering (PEM) | 39-Varimount | 0 | |||
![]() Master Electronics | DR-25-1/8-0-SP | TE Connectivity | Heat Shrink Tubing ST Elastomer Black Medium Piece RoHS : Compliant |
| 17,777 | |
| 100SP3T2B4M7RE | E-Switch Inc | Toggle Switch - SPDT - On-None-On - 20V - 0.4VA - Gold Plated Contacts - Right Angle PC Mount - 1/4 Dia x .280 No Thread Bushing - No Hardware RoHS : Compliant |
| 365 | ||
| RF047-A-M0SP-M0SP-0152 | Samtec Inc | 50 OHM RoHS : Compliant |
| 0 | ||
| TPEM-NR7-0-SP | TE Connectivity | TPEM-NR7-0-SP MOQ Reduction RoHS : Compliant |
| 0 | ||
| SF-2410SP063W-2 | Bourns Inc | SMD Time Lag Wire Core Fuse - 0.63A - 2410 - 250VAC - -55°C to 125°C - Tape&Reel RoHS : Compliant |
| 0 | ||
| EQDP-014-06.00-SPU-TED-7 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| EQDP-014-08.00-SPU-SPU-7-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| EQDP-014-16.00-SPD-TTL-7-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| EQDP-014-36.00-SPD-TTR-5-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| EQDP-028-10.00-SPU-STR-7 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| EQDP-028-22.00-SPD-TTR-5-B | Samtec Inc | RoHS : Compliant |
| 0 | ||
| EQDP-042-06.00-SPD-TPD-6 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| VPB-3-0-SP | TE Connectivity | Heat Shrink Tubing ST Polymer Blend Fluoro Elastomer Black Medium Piece MOQ Reduction RoHS : Compliant |
| 0 | ||
| X4-3.5-0-SP-SM | TE Connectivity | X4-3.5-0-SP-SM RoHS : Compliant |
| 0 | ||
| V4-3.5-0-SP-SM | TE Connectivity | V4-3.5-0-SP-SM MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 100SP3T2B4M7RE | E-Switch Inc | Toggle Switches SPDT ON-OFF-ON R/A |
| 50 | |
| 700SP7B10M7CE | E-Switch Inc | Pushbutton Switches - Board Mount RoHS : Compliant |
| 50 | ||
FS5700SPMT2B2M2QE![]() | E-Switch Inc | Pushbutton Switches - Board Mount PUSHBUTTON, 1A 9VDC, SPDT On-(On), Panel Mount, Rear PC Pin RoHS : Compliant |
| 50 | ||
| 800SP9B9M6RE | E-Switch Inc | Pushbutton Switches .4A @ 20V (AC/DC) Off-(On) SPST/SPDT RoHS : Compliant |
| 50 | ||
| 700SP7B10M1RE | E-Switch Inc | Pushbutton Switches .4A @ 20VAC On-(On) SPDT Solder |
| 50 | ||
| 100SP3T1B1M1QEH | E-Switch Inc | Toggle Switches ON-OFF-ON SLDR MNT RoHS : Compliant |
| 50 | ||
| 100SP3T2B3M6QE | E-Switch Inc | Toggle Switches TOGGLE, SPDT , On-Off-On, Panel Mount, Right Angle |
| 50 | ||
| 100SP3T7B13M2QE | E-Switch Inc | Toggle Switches TOGGLE, SPDT , On-Off-On, Panel Mount RoHS : Compliant |
| 50 | ||
| 100SP4T1B2M2QE | E-Switch Inc | Toggle Switches 5A 120VAC/28VDC (On)-Off-(On) RoHS : Compliant |
| 50 | ||
| LPJ-30SP | Eaton Bussmann | Fuse, Cylinder, Time Lag, 30A, Class J, 0.81x2.25", Cartridge, 600/300VAC/VDC RoHS : Unknown |
| 50 | ||
| 07100-SPO72 | Qualtek Electronics Corporation | CABLE ASSEMBLY; Power Cord; 72 in; STRAIGHT; SPT-1(18/2) |
| 13 | ||
| 100SP2T8B13VS2REH | E-Switch Inc | Toggle Switches 0.4VA @ 20V (AC/DC) On-None-(On) PC Mnt RoHS : Compliant |
| 5 | ||
| Q40SP6FF200Q | Banner Engineering Corp | SENSOR PHOTOELECTRIC EZ-BEAM Q40 SERIESFIXED FIELD |
| 3 | ||
| NE-4120S-P | Moxa Inc | NE-4120S Programmable Version |
| 1 | ||
| MB830SP-B | ICY DOCK | FlexiDock 3.5" SATA SAS HD |
| 0 | ||
![]() Pasternack Enterprises US | PE3C1360/SP1 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable Using LMR-240-UF Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable using LMR-240-UF coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male right angle low loss cable using LMR-240-UF coax with heatshrink and 90 deg. clock, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1360/SP1 can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C1360/SP1 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1360/SP1 can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable using LMR-240-UF coax with heatshrink and 90 deg. clock. | 4,200 | ||
| PE39430/SP1 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Right Angle Cable Using PE-SR405FLJ Coax with 180 Deg. Clock, LF Solder., Radio frequency assembly SMA male right angle to SMA male right angle cable using PE-SR405FLJ coax with 180 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male right angle cable using PE-SR405FLJ coax with 180 deg. clock, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE39430/SP1 can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE39430/SP1 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable using PE-SR405FLJ coax with 180 deg. clock, LF solder. | 3,260 | |||
| PE3C1360/SP1-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable 12 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male right angle low loss cable 12 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1360/SP1-12 can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C1360/SP1-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1360/SP1-12 can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable 12 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock. |
| 988 | ||
| PE3C6640/SP | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P103, RF Cable Type: PE-P103, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-P103 Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable using PE-P103 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable using PE-P103 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C6640/SP can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C6640/SP is built with PE-P103 which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable using PE-P103 coax. | 183 | |||
| PE3W09120/SP | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMP Female Right Angle Cable Using PE-SR405FLJ Coax with 270 Deg. Clock., Radio frequency assembly SMA male right angle to SMP female right angle cable using PE-SR405FLJ coax with 270 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMP female right angle cable using PE-SR405FLJ coax with 270 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a right angle SMP cable connection on the other. Our right angle SMA to right angle SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W09120/SP can also be known as a right angle SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09120/SP RF cable has a FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our right angle SMA male to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA plug to SMP jack cable assembly PE3W09120/SP is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W09120/SP can also be used in the other direction and will be a right angle SMP female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements. | 0 | |||
| PE3W09490/SP | Pasternack Enterprises | 0 | ||||
| PE3W00390/SP1-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. TNC Male Right Angle to TNC Female Right Angle Bulkhead Low Loss Cable 72 Inch Length Using LMR-200 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly TNC male right angle to TNC female right angle bulkhead low loss cable 72 inch length using LMR-200 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female right angle bulkhead low loss cable 72 inch length using LMR-200 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a right angle TNC bulkhead cable connection on the other. Our low loss right angle TNC to right angle TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W00390/SP1-72 can also be known as a low loss right angle TNC plug to right angle TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W00390/SP1-72 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle TNC male to right angle bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3W00390/SP1-72 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W00390/SP1-72 can also be used in the other direction and will be a right angle TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC right angle jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W13970/SP7 | Pasternack Enterprises | 0 | ||||
| PE3W09120/SP-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to SMP Female Right Angle Cable 12 Inch Length Using PE-SR405FLJ Coax with 270 Deg. Clock., Radio frequency assembly SMA male right angle to SMP female right angle cable 12 inch length using PE-SR405FLJ coax with 270 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMP female right angle cable 12 inch length using PE-SR405FLJ coax with 270 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a right angle SMP cable connection on the other. Our right angle SMA to right angle SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W09120/SP-12 can also be known as a right angle SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09120/SP-12 RF cable has a FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our right angle SMA male to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA plug to SMP jack cable assembly PE3W09120/SP-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W09120/SP-12 can also be used in the other direction and will be a right angle SMP female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE3W00390/SP1-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male Right Angle to TNC Female Right Angle Bulkhead Low Loss Cable 48 Inch Length Using LMR-200 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly TNC male right angle to TNC female right angle bulkhead low loss cable 48 inch length using LMR-200 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female right angle bulkhead low loss cable 48 inch length using LMR-200 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a right angle TNC bulkhead cable connection on the other. Our low loss right angle TNC to right angle TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W00390/SP1-48 can also be known as a low loss right angle TNC plug to right angle TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W00390/SP1-48 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle TNC male to right angle bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3W00390/SP1-48 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W00390/SP1-48 can also be used in the other direction and will be a right angle TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC right angle jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C5330/SP | Pasternack Enterprises | 0 | ||||
| PE3W00390/SP1 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Female Right Angle Bulkhead Low Loss Cable Using LMR-200 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly TNC male right angle to TNC female right angle bulkhead low loss cable using LMR-200 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female right angle bulkhead low loss cable using LMR-200 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a right angle TNC bulkhead cable connection on the other. Our low loss right angle TNC to right angle TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W00390/SP1 can also be known as a low loss right angle TNC plug to right angle TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W00390/SP1 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle TNC male to right angle bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3W00390/SP1 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W00390/SP1 can also be used in the other direction and will be a right angle TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC right angle jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W13970/SP6 | Pasternack Enterprises | 0 | ||||
| PE3C0170/SP1 | Pasternack Enterprises | 0 | ||||
| PE3W09120/SP-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male Right Angle to SMP Female Right Angle Cable 18 Inch Length Using PE-SR405FLJ Coax with 270 Deg. Clock., Radio frequency assembly SMA male right angle to SMP female right angle cable 18 inch length using PE-SR405FLJ coax with 270 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMP female right angle cable 18 inch length using PE-SR405FLJ coax with 270 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a right angle SMP cable connection on the other. Our right angle SMA to right angle SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W09120/SP-18 can also be known as a right angle SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09120/SP-18 RF cable has a FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our right angle SMA male to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA plug to SMP jack cable assembly PE3W09120/SP-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W09120/SP-18 can also be used in the other direction and will be a right angle SMP female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | VIPER100SP13TR | STMicroelectronics | Switching Regulator, Current-mode, 5.3A, 200kHz Switching Freq-Max, MOS, PZFM5 RoHS : Compliant | 12,833 | ||
| ZHTM-24/12-0-SP | TE Connectivity | HEAT SHRINK TUBE, DUAL WALL, CHLORINATED POLYOLEFIN, 24 ID Before Shrink, 2:1 Shrink Ratio, BLACK RoHS : Compliant | 10,843 | |||
| ZXBM5210-SP-13 | Diodes Incorporated | Brush DC Motor Controller, 1.5A, PDSO8 | 10,478 | |||
| VERSAFIT-3/64-0-SP | TE Connectivity | HEAT SHRINK TUBE, SINGLE WALL, IRRADIATED MODIFIED POLYOLEFIN, 1.63 ID Before Shrink, 2:1 Shrink Ratio, BLACK RoHS : Compliant | 10,006 | |||
| VERSAFIT-3/32-0-SP-SM | TE Connectivity | HEAT SHRINK TUBE, SINGLE WALL, IRRADIATED MODIFIED POLYOLEFIN, 2.59 ID Before Shrink, 2:1 Shrink Ratio, BLACK RoHS : Compliant | 8,876 | |||
| ZH-100-1/8-0-SP | TE Connectivity | HEAT SHRINK TUBE, SINGLE WALL, POLYOLEFIN, 3.2 ID Before Shrink, 2:1 Shrink Ratio, BLACK RoHS : Compliant | 7,707 | |||
| ZHTM-8/4-0-SP | TE Connectivity | HEAT SHRINK TUBE, DUAL WALL, CHLORINATED POLYOLEFIN, 8 ID Before Shrink, 2:1 Shrink Ratio, BLACK RoHS : Compliant | 7,235 | |||
| VERSAFIT-1-0-SP | TE Connectivity | HEAT SHRINK TUBE, SINGLE WALL, IRRADIATED MODIFIED POLYOLEFIN, 26.4 ID Before Shrink, 2:1 Shrink Ratio, BLACK RoHS : Compliant | 7,175 | |||
| ZHTM-12/6-0-SP | TE Connectivity | HEAT SHRINK TUBE, DUAL WALL, POLYOLEFIN, 12 ID Before Shrink, 2:1 Shrink Ratio, BLACK RoHS : Compliant | 6,431 | |||
| ZH-100-3/16-0-SP | TE Connectivity | HEAT SHRINK TUBE, SINGLE WALL, POLYOLEFIN, 4.8 ID Before Shrink, 2:1 Shrink Ratio, BLACK RoHS : Compliant | 6,255 | |||
| ZHTM-40/20-0-SP | TE Connectivity | HEAT SHRINK TUBE, DUAL WALL, POLYOLEFIN, 40 ID Before Shrink, 2:1 Shrink Ratio, BLACK RoHS : Compliant | 5,416 | |||
| VERSAFLEX-1/8-0-SP | TE Connectivity | HEAT SHRINK TUBE, SINGLE WALL, POLYESTER, BLACK RoHS : Compliant | 5,330 | |||
| VERSAFIT-1/8-0-SP | TE Connectivity | HEAT SHRINK TUBE, SINGLE WALL, IRRADIATED MODIFIED POLYOLEFIN, 3.43 ID Before Shrink, 2:1 Shrink Ratio, BLACK RoHS : Compliant | 4,984 | |||
| VERSAFIT-1/2-0-SP | TE Connectivity | RoHS : Compliant | 4,066 | |||
VIPER20SP![]() | STMicroelectronics | RoHS : Compliant | 3,281 | |||
![]() Waytek, Inc. | DFN1.25BK 50' SPOOLS | Techflex Inc | Techflex Heavy-Duty Dura-Flex Sleeving DF1.25BK 50' SPOOLS is black 1.25" nylon sleeving on a 50' spool. It is non-expandable but easily slides over hoses and cables, resists chemicals, UV damage, rot, engine chemicals, and salt, and is built for harsh industrial environments. |
| 3,250 | |
| CFBAR1-250SP | Eaton Electronics | Single 1/4-20 Stud MRBF Fuse Holder 3/8" Mounting Hole HARDWARE NOT INCLUDED 45575 |
| 1,414 | ||
| DFN2.38BK 50' SPOOLS | Techflex Inc | Techflex Heavy-Duty Dura-Flex Sleeving DFN2.38BK 50' SPOOLS is black 2.38" nylon sleeving on a 50' spool. It is non-expandable but easily slides over hoses and cables, resists chemicals, UV damage, rot, engine chemicals, and salt, and is built for harsh industrial environments. |
| 1,400 | ||
| DFN1.75BK 50' SPOOLS | Techflex Inc | Techflex Heavy-Duty Dura-Flex Sleeving DFN1.75BK 50' SPOOLS is black 1.75" nylon sleeving on a 50' spool. It is non-expandable but easily slides over hoses and cables, resists chemicals, UV damage, rot, engine chemicals, and salt, and is built for harsh industrial environments. |
| 750 | ||
| CFBAR2-250SP | Eaton Electronics | Double 1/4-20 Stud MRBF Fuse Holder 3/8" Mounting Hole HARDWARE NOT INCLUDED |
| 422 | ||
| LVD20-100-SPC442 | InPower Semiconductor Company Ltd | Low Voltage Disconnect w/ Over Current Shutdown Protection 12V, 100A |
| 9 | ||
![]() Win Source Electronics | LD39130SPUR | STMicroelectronics | IC REG LINEAR POS ADJ 300MA 6DFN RoHS : Compliant |
| 102,358 | |
| PMV240SP | Nexperia | P-Channel 30V 1.2A 330mW Surface Mount TO-236AB (SOT23) RoHS : Compliant |
| 81,000 | ||
| IR2010SPBF | Infineon Technologies AG | IC DRIVER HIGH/LOW SIDE 16SOIC / Driver 200V 3A 2-OUT High and Low Side Non-Inv 16-Pin SOIC W Tube RoHS : Compliant |
| 40,950 | ||
| IRF540SPBF | Vishay Huntington | MOSFET N-CH 100V 28A D2PAK |
| 25,880 | ||
| SBRT10U50SP5-13 | Diodes Incorporated | DIODE SBR 50V 10A POWERDI5 RoHS : Compliant |
| 25,000 | ||
| ZXBM5210-SP-13 | Diodes Incorporated | IC MOTOR DRIVER 3V-18V 8SO RoHS : Compliant |
| 24,752 | ||
| IRF9540SPBF | Vishay Huntington | MOSFET P-CH 100V 19A D2PAK |
| 20,300 | ||
| IRF3710SPBF | Infineon Technologies AG | HEXFET® Power MOSFET ( VDSS = 100V , RDS(on) = 23mΩ , ID = 57A ) | MOSFET N-CH 100V 57A D2PAK RoHS : Compliant |
| 16,670 | ||
| IRL620SPBF | Vishay Huntington | MOSFET N-CH 200V 5.2A D2PAK |
| 14,570 | ||
| IRF8010SPBF | Infineon Technologies AG | MOSFET N-CH 100V 80A D2PAK RoHS : Compliant |
| 11,120 | ||
| 8TQ100SPBF | Vishay Huntington | DIODE SCHOTTKY 100V 8A D2PAK |
| 4,280 | ||
| IRG4PH50SPBF | Infineon Technologies AG | INSULATED GATE BIPOLAR TRANSISTOR | IGBT 1200V 57A 200W TO247AC RoHS : Compliant |
| 2,000 | ||
| IRF840SPBF | Vishay Huntington | MOSFET N-CH 500V 8A D2PAK |
| 1,236 | ||
VNQ660SP13TR![]() | STMicroelectronics | RELAY SSR 4CH 36V POWERSO-10 RoHS : Compliant |
| 1,120 | ||
M30620SPGP![]() | Renesas Electronics Corporation | SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER RoHS : Compliant |
| 209 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |