データシートサーチシステム
  Japanese  ▼
ALLDATASHEET.JP

X  



10103CC02T-XCGLD 販売店
販売店部品番号メーカー部品情報PriceQty.
BuyNow

Microchip Technology Inc		DSPIC30F1010-30I/SO

 Microchip Technology Inc 16 BIT SMPS MCU/DSP 28LD 30 NS MIPS 6 KB FLASH, SOIC, Projected EOL: 2036-10-23
RoHS : Compliant
5,000 : $4.07
1,000 : $4.26
100 : $4.65
25 : $5.12
1 : $5.63
135
DSPIC30F1010-30I/SP

 Microchip Technology Inc 16 BIT SMPS MCU/DSP 28LD 30 NS MIPS 6 KB FLASH, SPDIP, Projected EOL: 2036-10-23
RoHS : Compliant
5,000 : $4.45
1,000 : $4.66
100 : $5.11
25 : $5.61
1 : $6.19
70
MV21010-30

 Microchip Technology Inc GaAs TVAR Hermetic Pill, Projected EOL: 2046-08-15 - Contact for Pricing
0
DSPIC30F1010-30I/MM

 Microchip Technology Inc 16 BIT SMPS MCU/DSP 28LD 30MIPS 6KB FLASH, QFN-S, Projected EOL: 2036-10-23
RoHS : Compliant
5,000 : $3.97
1,000 : $4.14
100 : $4.54
25 : $4.98
1 : $5.48
0
VMK3-1010-32K7680000TR

 Microchip Technology Inc VMK3-1010-32K7680000TR, CDFP, Projected EOL: 2051-09-21
RoHS : Compliant
5,000 : $0.47
1 : $0.48
0

ComSIT USA		CR10103JK

 ASJ Holdings Limited GENERAL PURPOSE THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 10000ohm, 50V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 0402
RoHS : Compliant
50,000
BFC233810103

 Vishay Intertechnologies Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.01uF, Through Hole Mount
RoHS : Not Compliant
5,500
PT10LV10103A2020PMS

 Amphenol Piher TRIMMPOTENTIOMETER, 10K, 0.15W, 1GANG
RoHS : Compliant
5,000
PTC10LV10103A2020

 Amphenol Piher 10 MM CERMET POTENTIOMETER Trimmer, Cermet, 0.33W, 10000ohm, 20% +/-Tol, 1 Turn(s)
RoHS : Compliant
400
31010320

 Schurter Electronic Components Fuse Holder Holder Cartridge 16A Panel Mount
RoHS : Compliant
100
JM3851010304BGA

 National Semiconductor Corporation VOLTAGE COMPARATOR Comparator, 1 Func, 3000uV Offset-Max, 640ns Response Time, BIPolar, MBCY8
RoHS : Not Compliant
15

NexGen Digital		CAT10-103J4LF

 Bourns Inc
RoHS : Compliant
4,614
CR10-103J

 MERITEK Electronics Corporation
2,354
PT-10LV10103A2020

 Amphenol Piher
1,960
JM38510/10304BGC

 Texas Instruments
22
S1210-103K

 API Delevan
RoHS : Not Compliant
18
010-10302-00

 Garmin Ltd
8

Rutronik		CR10-103-JN

 ASJ Holdings Limited RC0402 10K 5% 0,063W TK100
RoHS : Compliant
50,000 : $7.0E-4
100,000 : $6.0E-4
400,000 : $6.0E-4
650,000 : $5.0E-4
6,850,000
CR10-103-JK

 ASJ Holdings Limited RC0402 10K 5% 0,063W TK100
RoHS : Compliant
10,000 : $7.0E-4
40,000 : $6.0E-4
50,000 : $6.0E-4
300,000 : $5.0E-4
990,000
10103594-0001LF

 Amphenol Communications Solutions Micro-USB Type-B 2.0 05P R/A SMT
RoHS : Compliant
1,500 : $0.5283
3,000 : $0.5187
4,500 : $0.5139
6,000 : $0.5091
9,000 : $0.4995
40,500
BFC233810103

 Vishay Intertechnologies FF 10nF 440Vac 20% X1 P15 MKP
RoHS : Compliant
1,000 : $0.2625
2,000 : $0.2464
3,000 : $0.2423
4,000 : $0.2383
5,000 : $0.2242
2,000

Avnet Silica		M38510/10301BGA

 Teledyne HiRel E2VM3851010301BGA (Alt: M38510/10301BGA)
RoHS : Not Compliant
0
M38510/10301BGA

 Teledyne HiRel E2VM3851010301BGA (Alt: M38510/10301BGA)
RoHS : Not Compliant
0
M38510/10304BGX

 Teledyne HiRel Quad operational amplifier medium power (Alt: M38510/10304BGX)
RoHS : Compliant
0
DSPIC30F1010-30I/SP

 Microchip Technology Inc (Alt: DSPIC30F1010-30I/SP)
RoHS : Compliant
0
R7F7010103AFP-C#AA4

 Renesas Electronics Corporation IC MCU 32BIT 512KB FLASH 48LQFP (Alt: R7F7010103AFP-C#AA4)
RoHS : Compliant
0
DSPIC30F1010-30I/SO

 Microchip Technology Inc (Alt: DSPIC30F1010-30I/SO)
RoHS : Compliant
0
DSPIC30F1010-30I/MM

 Microchip Technology Inc (Alt: DSPIC30F1010-30I/MM)
RoHS : Compliant
0

Braemac Americas-Symmetry		ASPI-F1010-3R3M-T

 Abracon Corporation
RoHS : Compliant
1 : $1.75
0
EV_MOD_CH101-03-01

 TDK Invensense Eval Unit for Chirp - Low-Power, MEMS Ultrasonic Time-of-Flight Sensor in 3.5mm x 3.5mm Package with Wide FoV (180?) Cap
1 : $10.82
10 : $10.16
0
ASPIAIG-Q1010-3R3M-T

 Abracon Corporation
RoHS : Compliant
1 : $2.1875
0

EBV Elektronik		DSPIC30F1010-30I/SP

 Microchip Technology Inc (Alt: DSPIC30F1010-30I/SP)
RoHS : Compliant
0
DSPIC30F1010-30I/SO

 Microchip Technology Inc (Alt: DSPIC30F1010-30I/SO)
RoHS : Compliant
0

ECCO		101-0347-000

 ITT Interconnect Solutions
5 : $16.72
542
1010347000

 ITT Interconnect Solutions
5 : $16.72
542
1010332000

 ITT Interconnect Solutions
1 : $48.71
470
101-0332-000

 ITT Interconnect Solutions
1 : $48.71
470
101-0330-000

 ITT Interconnect Solutions
5 : $18.55
386
1010343000

 ITT Interconnect Solutions
5 : $18.13
252
101-0343-000

 ITT Interconnect Solutions
5 : $18.13
252
101-0342-000

 ITT Interconnect Solutions
1 : $35.49
216
101-0352-000

 ITT Interconnect Solutions
5 : $13.07
161
1010352000

 ITT Interconnect Solutions
5 : $13.07
161
101-0344-000

 ITT Interconnect Solutions
5 : $14.32
131
1010355000

 ITT Interconnect Solutions
5 : $13.55
114
101-0341-000

 ITT Interconnect Solutions
5 : $17.11
99
1010356000

 ITT Interconnect Solutions
1 : $49.63
9
101-0356-000

 ITT Interconnect Solutions
1 : $49.63
9

FDH Electronics		110103-35 REV-AV

 Whitmore/Wirenetics Wire and Cable
5,248
RSC 10 10 3

 FDH Electronics Wire Placehldr
1,785
ICLF6101-03

 ELECTRO ENTERPRISES INC Data Bus
1 : $410.0
5 : $410.0
10 : $410.0
25 : $410.0
50 : $410.0
100 : $410.0
250 : $410.0
500 : $410.0
1,000 : $410.0
2,500 : $410.0
10,000 : $410.0
162
NGJ803J01-01-01-0300

 BJG Electronics Cable Assembly
28
NGJ803J01-01-01-0312

 BJG Electronics Cable Assembly
26
NGJ803J01-01-01-0320

 BJG Electronics Cable Assembly
25
NGJ803J01-01-01-0316

 BJG Electronics Cable Assembly
24
NGJ803J01-01-01-0324

 BJG Electronics Cable Assembly
24
NGJ803J01-01-01-0328

 BJG Electronics Cable Assembly
24
TN1010-300

 DALLAS AVIONICS INC. Miscellaneous
3
CL101030

 SOURIAU-SUNBANK Connector Misc
0
590-53AD10-103

 Honeywell Sensing and Control Thermistor
1 : $299.12
5 : $299.12
10 : $249.267
25 : $201.331
50 : $201.331
100 : $183.67
250 : $168.858
500 : $168.858
1,000 : $168.858
2,500 : $168.858
10,000 : $168.858
0
M85049/10-103N

 Glenair Inc Connector
1 : $1,281.127
5 : $1,194.271
10 : $1,067.606
25 : $1,051.672
50 : $1,051.672
100 : $1,036.206
250 : $1,006.6
500 : $978.639
1,000 : $965.233
2,500 : $965.233
10,000 : $965.233
0
M85049/10-103W

 Glenair Inc Connector
1 : $1,459.382
5 : $1,360.441
10 : $1,216.152
25 : $1,198.0
50 : $1,198.0
100 : $1,180.382
250 : $1,146.657
500 : $1,114.806
1,000 : $1,099.534
2,500 : $1,099.534
10,000 : $1,099.534
0
M85049/10-103Z

 Glenair Inc Connector
1 : $1,437.873
5 : $1,340.39
10 : $1,198.227
25 : $1,180.343
50 : $1,180.343
100 : $1,162.985
250 : $1,129.757
500 : $1,098.375
1,000 : $1,083.329
2,500 : $1,083.329
10,000 : $1,083.329
0

Maritex		GPHA101-0301A001A1BA

 Greenconn Corp Pin Header; pitch 2.54mm; 1x3 pins; assembly: THT; male; straight; single row
1,000 : $0.02
500 : $0.023
250 : $0.025
100 : $0.028
1 : $0.033
4,260
3101.0315

 Schurter Electronic Components Fuse holder; 5x20mm; panel mount; Fingergrip; 4.8x0.5mm quick-connect; 250VAC; 10A; IP67
RoHS : Compliant
1,000 : $1.855
800 : $1.99
500 : $2.288
300 : $2.639
200 : $2.935
100 : $3.483
50 : $4.046
10 : $4.828
5 : $5.169
1 : $5.8062
1,000
3101.0310

 Schurter Electronic Components Fuse holder; 5x20mm; panel mount; slotted; 4.8x0.5mm quick-connect; 250VAC; 10A; IP67
RoHS : Compliant
100 : $1.745
50 : $1.964
40 : $2.084
20 : $2.285
10 : $2.377
5 : $2.464
1 : $2.7311
991
RNP18-PK1010-103K

 RDA Microelectronics Inductor: wire; THT; 10000uH; 0.25A; 14.6R; 11.5x11.5mm; 10%
2,000 : $0.211
500 : $0.227
100 : $0.273
10 : $0.385
1 : $1.019
100
RNP18-PK1010-331K

 RDA Microelectronics Inductor: wire; THT; 330uH; 1.4A; 0.51R; 11.5x11.5mm; 10%
2,000 : $0.166
500 : $0.176
100 : $0.214
10 : $0.298
1 : $1.019
100
RNP18-PK1010-332K

 RDA Microelectronics Inductor: wire; THT; 3300uH; 0.5A; 4.65R; 11.5x11.5mm; 10%
2,000 : $0.181
500 : $0.191
100 : $0.234
10 : $0.326
1 : $1.019
100
NC-24CW108-XP (DK110103)

 PCB-TECH MCPCB, thermal conductivity 2W/(m*K), thickness: 1.6mm, number of layers - 1, copper layer thickness 35um, white soldermask, legend color: gold, size: diameter 108mm, pad cover: gold; for XP/XT LEDs, /24
1 : $2.52
73
A11-0103

 POKOJ Installation terminal block; 1-level; 2-contacts; for wire 0,5-4,0mm2; screw terminal; black; Din rail; 1000V/32A
250 : $1.111
50 : $1.271
10 : $1.432
1 : $1.577
20
L-RNP18-PK1010-332M

 RDA Microelectronics Choke Coil
2,000 : $0.189
500 : $0.201
100 : $0.245
1 : $0.509
10

Pasternack Enterprises US		PE910103

 Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 6 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Gold, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Gold. Commercial Grade RP-SMA Female to RP-SMA Female Adapter., The commercial grade SMA adapter PE910103 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance and a maximum VSWR of 1.35:1. This RF adapter has a female to female gender configuration, which provides easier connections in tighter spaces. Our reverse polarity SMA to reverse polarity SMA adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 6 GHz. This SMA reverse polarity female to SMA reverse polarity female adapter is one of the many RF components that ship the same business day as they are ordered. The PE910103 female SMA to female SMA adapter has a straight body. This Pasternack SMA to SMA coax adapter is an in-line RF adapter in a commercial grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This commercial grade RF adapter has a 0.6-inch length, 0.69-inch width, and 0.05 lbs weight. The PE910103 adapter from Pasternack is made from a brass connector body and has a brass center contact. Our SMA reverse polarity female to SMA reverse polarity female radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This commercial grade RF adapter has an operating temperature range of -65 to 165 degrees C. Additional dimensions and specifications for this in-series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of reverse polarity SMA to reverse polarity SMA radio frequency commercial grade adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 6 GHz RF adapter that meets your requirements.
1 : $19.49
5 : $19.1
10 : $18.71
25 : $18.32
61
PEWAT1010-3

 Pasternack Enterprises Key Specifications, Waveguide Size: WR-15, Attenuation, Typical: 3 dB, Flange Size: UG-385/U, VSWR: 1.15:1, Minimum Frequency: 50 GHz, Maximum Frequency: 75 GHz, Maximum Power: 2 W. WR-15 Waveguide Fixed Attenuator, 3 dB, from 50 GHz to 75 GHz, UG-385/U Round Cover Flange, 2W Power., WR-15 Pasternack waveguide fixed attenuator PEWAT1010-3 is in stock at our ISO 9001:2008 certified facilities that ship same-day internationally. Pasternack WR-15 gold-plated waveguide attenuators function up to 75 GHz maximum frequency rating. This 50 GHz to 75 GHz fixed waveguide attenuator PEWAT1010-3 has round cover gold-plated flanges and is in stock continuously. Waveguide fixed attenuator WR-15 with aluminum round cover flanges from Pasternack has a high-quality rating of 3 dB attenuation accuracy. Pasternack has been supplying waveguide components like these 50 GHz to 75 GHz 3 dB aluminum fixed attenuators since it started business in 1972. Off-the-shelf online or by phone, we ship these industry-leading round cover UG-385/U gold plated flanged WR-15 waveguide fixed attenuators around the globe. PEWAT1010-3 medium power waveguide fixed attenuator at 75 GHz max frequency and 50 GHz minimum frequency is able to achieve amazing RF performance with 2 watts of peak input power. These 2W WR-15 waveguide attenuators at 3 dB fixed attenuation by Pasternack have a typical 1.15:1 VSWR (voltage standing wave ratio). WR-15 waveguide gold plated fixed attenuator that operates in the 50 GHz to 75 GHz range is 0.148 inches in width. 0.148 inch wide 2W aluminum waveguide attenuator fixed from Pasternack has a length of 2 inches. Satellite, RADAR, and wireless communications systems utilize 75 GHz 0.148 by 2-inch gold-plated waveguide 3 dB attenuators that have round cover UG-385/U flanges. Precise CAD drawings are accessible for these WR-15 3 dB PEWAT1010-3 waveguides with specifications and dimensions on our PDF datasheet download. For any issues with our 2W 0.148 inch wide fixed attenuators that use round cover aluminum flanges, Pasternack tech support experts are always at your disposal. Let Pasternack and our knowledgeable sales team be your first and last stop to purchase top-shelf waveguide components like this 2 watt 3 dB attenuation WR-15 fixed attenuator at 50 GHz to 75 GHz.
1 : $1,200.0
5 : $1,152.0
10 : $1,104.0
25 : $1,056.0
1
PEWAT1010-30

 Pasternack Enterprises Key Specifications, Waveguide Size: WR-15, Attenuation, Typical: 30 dB, Flange Size: UG-385/U, VSWR: 1.15:1, Minimum Frequency: 50 GHz, Maximum Frequency: 75 GHz, Maximum Power: 2 W. WR-15 Waveguide Fixed Attenuator, 30 dB, from 50 GHz to 75 GHz, UG-385/U Round Cover Flange, 2W Power., WR-15 Pasternack waveguide fixed attenuator PEWAT1010-30 is in stock at our ISO 9001:2008 certified facilities that ship same-day internationally. Pasternack WR-15 gold-plated waveguide attenuators function up to 75 GHz maximum frequency rating. This 50 GHz to 75 GHz fixed waveguide attenuator PEWAT1010-30 has round cover gold-plated flanges and is in stock continuously. Waveguide fixed attenuator WR-15 with aluminum round cover flanges from Pasternack has a high-quality rating of 30 dB attenuation accuracy. Pasternack has been supplying waveguide components like these 50 GHz to 75 GHz 30 dB aluminum fixed attenuators since it started business in 1972. Off-the-shelf online or by phone, we ship these industry-leading round cover UG-385/U gold plated flanged WR-15 waveguide fixed attenuators around the globe. PEWAT1010-30 medium power waveguide fixed attenuator at 75 GHz max frequency and 50 GHz minimum frequency is able to achieve amazing RF performance with 2 watts of peak input power. These 2W WR-15 waveguide attenuators at 30 dB fixed attenuation by Pasternack have a typical 1.15:1 VSWR (voltage standing wave ratio). WR-15 waveguide gold plated fixed attenuator that operates in the 50 GHz to 75 GHz range is 0.148 inches in width. 0.148 inch wide 2W aluminum waveguide attenuator fixed from Pasternack has a length of 2 inches. Satellite, RADAR, and wireless communications systems utilize 75 GHz 0.148 by 2-inch gold-plated waveguide 30 dB attenuators that have round cover UG-385/U flanges. Precise CAD drawings are accessible for these WR-15 30 dB PEWAT1010-30 waveguides with specifications and dimensions on our PDF datasheet download. For any issues with our 2W 0.148 inch wide fixed attenuators that use round cover aluminum flanges, Pasternack tech support experts are always at your disposal. Let Pasternack and our knowledgeable sales team be your first and last stop to purchase top-shelf waveguide components like this 2 watt 30 dB attenuation WR-15 fixed attenuator at 50 GHz to 75 GHz.
1 : $1,200.0
5 : $1,152.0
10 : $1,104.0
25 : $1,056.0
1
PE3C10103-18

 Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to N Female Bulkhead Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-18 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-18 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $149.99
25 : $142.49
50 : $134.99
100 : $128.99
0
PE3C10103-24

 Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to N Female Bulkhead Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-24 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-24 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01
0
PE3C10103-6

 Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to N Female Bulkhead Cable 6 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 6 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 6 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-6 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-6 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $139.99
25 : $132.99
50 : $125.99
100 : $120.39
0
PE3C10103

 Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 2.92mm Male to N Female Bulkhead Cable Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
0
PE3C10103-9

 Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 2.92mm Male to N Female Bulkhead Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-9 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-9 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11
0
PE3C10103-12

 Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to N Female Bulkhead Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-12 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-12 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01
0

TE Connectivity		T1510103000-000

 TE Connectivity H10B-AD-LB Hood & Base Connector Product Type: Base Housing Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1510103000-000 | Internal Number: T1510103000-000 | TE Connectivity
RoHS : Compliant
50 : $24.98
25 : $26.45
10 : $27.92
1 : $29.39
4

Teledyne HiRel		M38510/10301B2A

 Teledyne HiRel VOLT. COMPARATOR, DIFFERENTIAL
RoHS : Not Compliant
0
M38510/10304BCA

 Teledyne HiRel VOLT. COMPARATOR/BUFFER, PRECISION
RoHS : Not Compliant
0
M38510/10103BHA

 Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10103BPA

 Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10301BCA

 Teledyne HiRel VOLT. COMPARATOR, DIFFERENTIAL
RoHS : Not Compliant
0
M38510/10103BGA

 Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10103B2A

 Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10305BFA

 Teledyne HiRel VOLT. COMPARATOR, DUAL
RoHS : Not Compliant
0
M38510/10304B2A

 Teledyne HiRel VOLT. COMPARATOR/BUFFER, PRECISION
RoHS : Not Compliant
0
M38510/10301BGA

 Teledyne HiRel VOLT. COMPARATOR, DIFFERENTIAL
RoHS : Not Compliant
0
M38510/10301BHA

 Teledyne HiRel VOLT. COMPARATOR, DIFFERENTIAL
RoHS : Not Compliant
0
M38510/10103BCA

 Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10304BGA

 Teledyne HiRel VOLT. COMPARATOR/BUFFER, PRECISION
RoHS : Not Compliant
0
M38510/10304BHA

 Teledyne HiRel VOLT. COMPARATOR/BUFFER, PRECISION
RoHS : Not Compliant
0
M38510/10304BPA

 Teledyne HiRel VOLT. COMPARATOR/BUFFER, PRECISION
RoHS : Not Compliant
0

Venkel Ltd.		TRCR1210-103MT

 VENKEL LTD Trimmable CR;1210;10K;�20%
RoHS : Compliant
0

Vyrian		14910A0BHSX10103KA

 Vishay Intertechnologies Potentiometer, Cermet, 1W, 10000ohm, 10% +/-Tol, 150ppm/Cel, 1 Turn(s)
RoHS : Compliant
18,413
CAY10-103J4AS

 Bourns Inc Array/Network Resistor, Isolated, Metal Glaze/thick Film, 10000ohm, 50V, 5% +/-Tol, 250ppm/Cel, Surface Mount, 0408
RoHS : Unknown
14,370
DSPIC30F1010-30I/SP

 Microchip Technology Inc 16-Bit Size, 0-Ext Bit, 15MHz, CMOS, PDIP28
RoHS : Compliant
12,723
2153101031

 Molex Cable Assembly
RoHS : Compliant
12,523
10-10-1033

 Molex Rectangular Power Connector, 3 Contact(s), Female, Solder Terminal, Plug
RoHS : Compliant
11,404
2160101031

 Molex Cable Assembly
RoHS : Compliant
10,791
M38510/10304BCA

 National Semiconductor Corporation Comparator, 1 Func, 4000uV Offset-Max, 200ns Response Time, BIPolar, CDIP14
8,969
5961-01-039-0333

 Texas Instruments Silicon Controlled Rectifier, 12A I(T), 50V V(DRM)
RoHS : Not Compliant
8,067
JM38510/10103BPA

 Texas Instruments Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar
RoHS : Not Compliant
7,577
M38510/10307SHA

 Analog Devices Inc Comparator, 2 Func, 2000uV Offset-Max, CDFP10
RoHS : Not Compliant
5,335
JM38510/10304BGA

 Texas Instruments Comparator, 1 Func, 3000uV Offset-Max, 640ns Response Time, BIPolar, MBCY8
RoHS : Compliant
5,163
JM38510/10306BCA

 Texas Instruments Comparator, 2 Func, 7000uV Offset-Max, 80ns Response Time, BIPolar, CDIP14
4,604
JM38510/10103SPA

 Texas Instruments Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar, CDIP8
3,451
JM38510/10304BGX

 STMicroelectronics
704
R7F7010103AFP

 Renesas Electronics Corporation Microcontroller, 32-Bit, FLASH, RH850G3K CPU, 80MHz, CMOS, PQFP48
425

Waytek, Inc.		10103MT

 Hillsdale Terminal & Tool Inc Non-Insulated 16-14 Ga, Ring Terminal, 3/8" Stud, Reel (1,000 pcs = 1 Reel)
1,000 : $0.0809
5,000 : $0.0738
2,000
10103

 Hillsdale Terminal & Tool Inc Uninsulated Ring Terminal 16-14 Gauge, 3/8" Stud
100 : $0.1034
200 : $0.0938
500 : $0.0839
1,000 : $0.076
5,000 : $0.0725
914

Win Source Electronics		10103594-0001LF

 Amphenol FCi CONN RCPT STD MICRO USB TYPE B
RoHS : Compliant
945 : $0.3176
710 : $0.3542
550 : $0.3665
400 : $0.3787
260 : $0.3909
105 : $0.4764
21,450

リンク URL



ALLDATASHEETはお客様のビジネスに役立ちますか？  [ DONATE ]  

Alldatasheetは   |   広告   |   お問い合わせ   |   プライバシーポリシー   |   データシートへのリンク    |   リンク交換   |   メーカーリスト
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com