 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
1036/K-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 Avnet Americas | 103653-4 | TE Connectivity | Connector Housing, MTE, Plug, 5 Ways, 2.54 mm, AMPMODU MTE Series Contacts - Boxed Product (Development Kits) (Alt: 103653-4) RoHS : Compliant |
| 10,000 | |
| 5-103635-5 | TE Connectivity | - Rail/Tube (Alt: 5-103635-5) RoHS : Compliant |
| 9,483 | ||
| 5-103639-2 | TE Connectivity | - Rail/Tube (Alt: 5-103639-2) RoHS : Compliant |
| 9,480 | ||
| 103670-5 | TE Connectivity | Pin Header, Wire-to-Board, 2.54 mm, 1 Rows, 6 Contacts, Through Hole Straight, AMPMODU MTE Series - Rail/Tube (Alt: 103670-5) RoHS : Not Compliant | 5,265 | |||
| 5-103669-5 | TE Connectivity | - Rail/Tube (Alt: 5-103669-5) RoHS : Compliant |
| 4,360 | ||
| 5-103634-1 | TE Connectivity | - Rail/Tube (Alt: 5-103634-1) RoHS : Compliant |
| 4,108 | ||
| 5-103635-4 | TE Connectivity | - Rail/Tube (Alt: 5-103635-4) RoHS : Compliant |
| 4,068 | ||
| 5-103634-7 | TE Connectivity | - Rail/Tube (Alt: 5-103634-7) RoHS : Compliant |
| 3,312 | ||
| 5-103635-7 | TE Connectivity | - Rail/Tube (Alt: 5-103635-7) RoHS : Compliant |
| 3,135 | ||
| 5-103672-4 | TE Connectivity | - Rail/Tube (Alt: 5-103672-4) RoHS : Compliant |
| 2,990 | ||
| 5-103673-4 | TE Connectivity | - Rail/Tube (Alt: 5-103673-4) RoHS : Compliant |
| 2,817 | ||
| 5-103639-4 | TE Connectivity | - Rail/Tube (Alt: 5-103639-4) RoHS : Compliant |
| 745 | ||
| 103670-6 | TE Connectivity | - Rail/Tube (Alt: 103670-6) RoHS : Not Compliant |
| 618 | ||
| 1-103653-5 | TE Connectivity | - Bulk (Alt: 1-103653-5) RoHS : Compliant |
| 279 | ||
| 6-103673-3 | TE Connectivity | - Rail/Tube (Alt: 6-103673-3) RoHS : Compliant |
| 8 | ||
 Newark | 1036A 0105000 | Belden Inc | 3 #18 Pvc Fs Pvc; |Belden 1036A 0105000 RoHS : Not Compliant |
| 5,100 | |
| 7447610368 | Wurth Elektronik | Wirewound Inductor, 6.8Uh, 0.28A, 0603; |Würth Elektronik 7447610368 RoHS : Compliant |
| 2,930 | ||
| 7447610368 | Wurth Elektronik | Wirewound Inductor, 6.8Uh, 0.28A, 0603; |Würth Elektronik 7447610368 RoHS : Compliant |
| 2,930 | ||
| 103653-5 | TE Connectivity | Connector, Plug, 6Pos, 1Rows, 2.54Mm; |Te Connectivity Amp 103653-5 RoHS : Compliant |
| 2,377 | ||
2SA1036KT146Q | ROHM Semiconductor | Transistor, Pnp, -32V, -0.5A, Sot-346; |Rohm 2SA1036KT146Q RoHS : Compliant |
| 2,166 | ||
| 2SA1036KT146Q | ROHM Semiconductor | Transistor, Pnp, -32V, -0.5A, Sot-346; |Rohm 2SA1036KT146Q RoHS : Compliant |
| 2,166 | ||
| PIC32AK3208GC41036-I/M7 | Microchip Technology Inc | Mcu, 32Bit, 200Mhz, Vqfn-Ep-36; |Microchip Technology PIC32AK3208GC41036-I/M7 RoHS : Compliant |
| 495 | ||
| 1036300000 | Weidmüller Interface GmbH & Co. KG | Terminal Block, Din Rail, 4 Position, 30; |Weidmuller 1036300000 RoHS : Compliant |
| 233 | ||
| RAY-103-6.0(10) | TE Connectivity | Braided Sleeve, 6Mm, Nickel Plated; |Te Connectivity Raychem RAY-103-6.0(10) RoHS : Compliant |
| 49 | ||
| 103653-5 | TE Connectivity | Wire-Board Connector, Plug, 6 Position, 2.54Mm; Product Range:Mte; Gender:Plug; No. Of Positions:6Positions; Pitch Spacing:2.54Mm; For Use With:Ampmodu Mte Series Contacts; Body Material:Thermoplastic; Contact Termination:Crimp Rohs Compliant: Yes RoHS : Compliant |
| 39 | ||
| FMC00310-36 | Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC00310-36 RoHS : Not Compliant |
| 32 | ||
| 2103-632-AL | RAF Electronic Hardware | Standoff, Hex Female-Female, 11.11Mm; |Raf Electronic Hardware 2103-632-AL RoHS : Compliant |
| 11 | ||
| 31-451.036 | EAO AG | Switch, Pushbutton, Dpst-2No, 100Ma, 42V; Product Range:31 Series; Panel Cutout Diameter:16Mm; Contact Configuration:Dpst-No; Switch Operation:Momentary; Pushbutton Actuator Style:Square; Actuator/Cap Colour:-; Ip Rating:Ip40 Rohs Compliant: Yes RoHS : Compliant |
| 5 | ||
| 1036 | Keystone Electronics Corp | Test Point, pcb, through Hole, brass; |Keystone 1036 RoHS : Compliant |
| 0 | ||
| 1036 | EDSYN | Tools, Soldering Station; Supply Voltage Vac:120V; Output Power:95W; Kit Contents:Hot Air Work Station Rohs Compliant: Yes |Edsyn 1036 RoHS : Compliant |
| 0 | ||
 RS | 103653-5 | TE Connectivity | PCB HOUSING, THERMOPLASTIC, 1 ROW, PIN 0.1 IN, UL 94V-0, 6, AMPMODU MTE SERIES RoHS : Compliant |
| 1,868 | |
| 2103-632-AL | RAF Electronic Hardware | STANDOFF, HEX, ALUMINUM, FEMALE, 6-32, 0.437" (11.1 MM) |
| 785 | ||
| 8971036 | RS Pro | TERMINAL BLOCK HEADER VERTICAL PCB MOUNT 6 CONTACT 1 ROW 3.5MM THROUGH HOLE |
| 100 | ||
| 1SNA110368R1200 (011036812) | TE Connectivity | DR4/8 SF DIN2,ENTRELEC |
| 28 | ||
| 2910364 (VAL-US-240/40/2+0-FM) | Phoenix Contact | SURGE PROTECTOR;TWO CHANNEL;REMOTE INDICATOR CONTACT FOR 240/480VAC SPLIT PHASE |
| 19 | ||
| 61036R (W204788) | Mersen Electrical Power | FUSE BLOCK, CLASS R SPRING REINFORCED,1 POLE,600V,100A, BOX CONNECTOR |
| 10 | ||
| 901-10360 (554664) | HellermannTyton | SLIDE ON CABLE MARKER, HELAGRIP 4 LEGEND 2 - 5MM 250 MARKERS |
| 10 | ||
| 1SNA103620R0100 (010362001) | TE Connectivity | SCFEX3 PR3 SEPARATOR, ENTRELEC |
| 10 | ||
| 151-03653 | HellermannTyton | MAGNETIC J-HOOK 3/4IN DIA HOOK, SIDE MOUNT, NEODYMIUM MAGNET/STEEL |
| 6 | ||
| 31-451.036 | EAO AG | PUSHBUTTON ACTUATOR, RAISED,18X18MM,2NO, MOMENTARY, ILLUMINATIVE,5A,250V, UNIVERSAL RoHS : Compliant |
| 6 | ||
| 20X45X7TC-BX (0075021036) | Dichtomatik | OIL SEAL, 20MM ID, 45MM OD, 7MM WIDTH, N701R MATERIAL |
| 5 | ||
| 8000-88410-3620300 | Murrelektronik GmbH | CABLE, DISTRIBUTION BOX, 8X M12, 4PIN, MOULDED CBL, 8X 0.34+3X 0.75, 3.0M |
| 1 | ||
| FLUKE-I2500-10 (3676410) | Fluke Calibration | PROBE I2500-10 IFLEX FLEXIBLE CURRENT PROBE |
| 1 | ||
| DFS60E-BEEM01024 (1036356) | SICK AG | INCREMENTAL ENCODER, 1, 024 PPR, 12 MM DIA. METAL SHAFT, 10-32 V, 5 M CABLE |
| 1 | ||
| 1036 | Keystone Electronics Corp | TEST POINT, PC SLOTTED, THM, HEIGHT .390, BRASS/TIN RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | PIC32AK3208GC41036-I/M7 | Microchip Technology Inc | 32-bit 200MHz MCU, DP-FPU, 32K Flash, 8K RAM, 40Msps 12-bit ADCs, Op Amps, Comp, VQFN, Projected EOL: 2051-02-10 RoHS : Compliant |
| 6,588 | |
| PIC32AK6416GC41036-E/M7 | Microchip Technology Inc | 32-bit 200MHz MCU, DP-FPU, 64K Flash, 16K RAM, 40Msps 12-bit ADCs, Op Amps, Comp, VQFN, Projected EOL: 2051-02-10 RoHS : Compliant |
| 2,993 | ||
| PIC32AK1216GC41036-E/M7 | Microchip Technology Inc | 32-bit 200MHz MCU, DP-FPU, 128K Flash, 16K RAM, 40Msps 12-bit ADCs, Op Amps,Comp, VQFN, Projected EOL: 2051-02-10 RoHS : Compliant |
| 2,871 | ||
| PIC32AK3208GC41036-E/M7 | Microchip Technology Inc | 32-bit 200MHz MCU, DP-FPU, 32K Flash, 8K RAM, 40Msps 12-bit ADCs, Op Amps, Comp, VQFN, Projected EOL: 2051-02-10 RoHS : Compliant |
| 2,336 | ||
| PIC32AK6416GC41036-I/M7 | Microchip Technology Inc | 32-bit 200MHz MCU, DP-FPU, 64K Flash, 16K RAM, 40Msps 12-bit ADCs, Op Amps, Comp, VQFN, Projected EOL: 2051-02-10 RoHS : Compliant |
| 1,898 | ||
| PIC32AK1216GC41036-I/M7 | Microchip Technology Inc | 32-bit 200MHz MCU, DP-FPU, 128K Flash, 16K RAM, 40Msps 12-bit ADCs, Op Amps,Comp, VQFN, Projected EOL: 2051-02-10 RoHS : Compliant |
| 1,606 | ||
| 5962-2221036QXF | Microchip Technology Inc | RTPF500ZTLS-CG1509E, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | |||
DSC1033DI1-036.0000-2.50-mm-x-2.00-mm.jpg) | Microchip Technology Inc | MEMS OSC, LVCMOS, 36MHz, 50PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2028-10-19 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSC1101DI1-036.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 36MHz, 50PPM, 2.5-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-01-29 RoHS : Compliant |
| 0 | ||
| DSC1121DI1-036.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 36MHz, 50PPM, 2.5-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-07-10 RoHS : Compliant |
| 0 | ||
DSC1121DI1-036.0000T-2.50-mm-x-2.00-mm.jpg) | Microchip Technology Inc | MEMS OSC, LVCMOS, 36MHz, 50PPM, 2.5-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2041-04-08 RoHS : Compliant |
| 0 | ||
| PIC32AK1216GC41036T-E/M7 | Microchip Technology Inc | 32-bit 200MHz MCU, DP-FPU, 128K Flash, 16K RAM, 40Msps 12-bit ADCs, Op Amps,Comp, VQFN, Projected EOL: 2051-02-10 RoHS : Compliant |
| 0 | ||
| PIC32AK6416GC41036T-E/M7 | Microchip Technology Inc | 32-bit 200MHz MCU, DP-FPU, 64K Flash, 16K RAM, 40Msps 12-bit ADCs, Op Amps, Comp, VQFN, Projected EOL: 2051-02-10 RoHS : Compliant |
| 0 | ||
| PIC32AK6416GC41036T-I/M7 | Microchip Technology Inc | 32-bit 200MHz MCU, DP-FPU, 64K Flash, 16K RAM, 40Msps 12-bit ADCs, Op Amps, Comp, VQFN, Projected EOL: 2051-02-10 RoHS : Compliant |
| 0 | ||
| PIC32AK3208GC41036T-I/M7 | Microchip Technology Inc | 32-bit 200MHz MCU, DP-FPU, 32K Flash, 8K RAM, 40Msps 12-bit ADCs, Op Amps, Comp, VQFN, Projected EOL: 2051-02-10 RoHS : Compliant |
| 0 | ||
 Bisco Industries | 10-360-2-05 | Staffall | 600 | |||
| 707-1036 | Staffall | 230 | ||||
| 103619 | Unbrako Group | 200 | ||||
| 11036 | Unbrako Group | 62 | ||||
| RYLB-1036 | WASHERS | 60 | ||||
| NAS1351C10-36 | NAS SOCKET CAP SCREWS | 50 | ||||
| 1-103635-3 | TE Connectivity | RoHS : Not Compliant | 13 | |||
| 2103-632-AL | RAF Electronic Hardware | 11 | ||||
| BU-2323-10-36-0 | Mueller Electric Company | 10 | ||||
| G055-1036-01 REV F | MISCELLANEOUS | 9 | ||||
| 10367-SS-1032-7 | Amatom Electronic Hardware | 8 | ||||
| M25988/1-036 | Military Specifications | 6 | ||||
| 2103-632-B-12 | RAF Electronic Hardware | 6 | ||||
| M38527/01-036N | Military Specifications | 4 | ||||
| LW-1036-1-12-00 | Southco | 4 | ||||
 Rochester Electronics | SMBZ1036LT1G | onsemi | Zener Regulating Diode, 0.225W, SOT23 RoHS : Compliant |
| 42,000 | |
| CY8CTMA1036AS-33T | Infineon Technologies AG | Specific Microcontroller ARM® Cortex®-M0 Touchscreen Controller 128 x 8 I²C, SPI 100-QFP T/R RoHS : Not Compliant | 9,000 | |||
| SN103639N | Texas Instruments | ANALOG INTERFACE RoHS : Not Compliant |
| 1,707 | ||
81036102A | Texas Instruments | OT PLD, 40ns, PAL-Type, TTL, CQCC20 RoHS : Not Compliant |
| 11 | ||
8103614SA | Texas Instruments | OT PLD, 40ns, PAL-Type, TTL, CDFP20 RoHS : Not Compliant |
| 24 | ||
JM38510/36101SEA | Texas Instruments | D Flip-Flop, LS Series, 1-Func, Positive Edge Triggered, 4-Bit, True Output, TTL, CDIP16 RoHS : Not Compliant |
| 32 | ||
| 8103608SA | AMD | SPLD PAL 8 Macrocell 4.5V - 5.5V 20-CFP RoHS : Not Compliant |
| 241 | ||
| CY8CTMA1036AA-33 | Cypress Semiconductor | Specific Microcontroller ARM® Cortex®-M0 Touchscreen Controller 128 x 8 I²C, SPI 100-QFP RoHS : Not Compliant |
| 1,045 | ||
ORSPI4-2FTE1036C | Lattice Semiconductor Corporation | System On Chip SPI4 498 I/O 250MHz 1036-BGA RoHS : Not Compliant |
| 3 | ||
MAX1036EKA | Maxim Integrated Products | IC ADC 1 CONV 8Bits SAR 2-Wire Serial, I²C SOT-23-8 T/R RoHS : Not Compliant |
| 1,200 | ||
| MAX1036LEKA | Maxim Integrated Products | MAX1036 4.5V To 5.5V, Low-Power, 4-Channel 2-Wire Serial 8-Bit ADC RoHS : Unknown |
| 2,334 | ||
| MAX1036LEKA-T | Maxim Integrated Products | IC ADC 1 CONV 8Bits SAR 2-Wire Serial, I²C SOT-23-8 T/R RoHS : Not Compliant |
| 10,000 | ||
| MAX1036MEKA-T | Maxim Integrated Products | MAX1036 4.5V To 5.5V, Low-Power, 4-Channel 2-Wire Serial 8-Bit ADC RoHS : Not Compliant |
| 10,000 | ||
| R5F10367DSP#V5 | Renesas Electronics Corporation | IC MCU RL78 16Bit 1 Core FLASH 4kB (4k x 8) 24MHz 20-SOP Tube RoHS : Compliant |
| 472 | ||
R5F1036AASP#V0 | Renesas Electronics Corporation | IC MCU RL78 16Bit 1 Core FLASH 16kB (16k x 8) 24MHz 20-SOP Tray RoHS : Compliant |
| 10 | ||
 Sager | 1036 | Keystone Electronics Corp | Test Plugs & Test Jacks PC Slotted test pnt .390x.093 RoHS : Compliant |
| 0 | |
| AYCT-1036-1036 | ABB Group | TEE CONNECTOR CABLE TO CABLE |
| 0 | ||
| 2-103634-5 | TE Connectivity | Headers & Wire Housings 03 HDR SRRA .100CL RoHS : Compliant | 0 | |||
| 1731110365 | Molex | FCT HOOD S1 0 DEG MTL W/THMBSCRW RoHS : Compliant |
| 0 | ||
| 131036-1 | TE Connectivity | RF Connectors / Coaxial Connectors COAX CONN BNC ASSY PLUG RoHS : Compliant |
| 0 | ||
| 103648-5 | TE Connectivity | Headers & Wire Housings RECEPT 6 POS RECEPT 6 POS UNLOAD RoHS : Compliant |
| 0 | ||
| 1036727 | Phoenix Contact | Terminal Block Tools & Accessories HS LC-H-D2C/ R4XC4-2 54 RoHS : Compliant |
| 0 | ||
| 0808671:0361 | Phoenix Contact | Terminal Block Tools & Accessories ZBF 5.LGS: CONSEC.NUMBERS |
| 0 | ||
| 1-103634-0 | TE Connectivity | Headers & Wire Housings 11 MTE HDR SRRA LATCH .100CL RoHS : Not Compliant | 0 | |||
| 1-103638-6 | TE Connectivity | Headers & Wire Housings 17 MTE HDR SRST LATCH .100CL RoHS : Not Compliant | 0 | |||
| 1-103644-9 | TE Connectivity | Headers & Wire Housings 20 MTE RCPT SR LATCH .100CL RoHS : Not Compliant | 0 | |||
| 1-103688-1 | TE Connectivity | Headers & Wire Housings 12 RCPT HSG SR PLAIN .102 RoHS : Compliant | 0 | |||
| 1-6609103-6 | TE Connectivity | AC Power Entry Modules PE000DH3B=C1314 RoHS : Compliant | 0 | |||
| 293-22-1-52-103-6-1-8 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 31-451.036 | EAO AG | ACTUATOR, � 16 MM, 18 MM X 18 MM, ILLUMINATED, SQUARE, BLACK, PLASTIC, 2 NO, MOMENTARY, UNIVERSAL TERMINAL, 2 X 0.5 MM RoHS : Compliant |
| 0 | ||
 TME | 561-03614 | HellermannTyton | Marker: cable; Marking: 1; 4.3÷5.3mm; polyamide; yellow; push-in |
| 2,500 | |
| 561-03611 | HellermannTyton | Marker: cable; Marking: 1; 4.3÷5.3mm; polyamide; brown; push-in; WIC |
| 1,700 | ||
| 561-03694 | HellermannTyton | Marker: cable; Marking: 9; 4.3÷5.3mm; polyamide; yellow; push-in |
| 1,100 | ||
| 561-03655 | HellermannTyton | Marker: cable; Marking: 5; 4.3÷5.3mm; polyamide; green; push-in; WIC |
| 700 | ||
| 561-03654 | HellermannTyton | Marker: cable; Marking: 5; 4.3÷5.3mm; polyamide; yellow; push-in |
| 400 | ||
| 51036-00002-02 | tesa UK Ltd | Tape: textile; W: 25mm; L: 25m; Thk: 0.26mm; Automotive; acrylic; 40% |
| 62 | ||
| 10366 | Wiha Quality Tools | Screwdriver bit: Torx®; TX10; 1/4"; Overall len: 90mm |
| 44 | ||
| 1036 | Keystone Electronics Corp | Tip: solder lug; THT; brass; tinned RoHS : Compliant |
| 0 | ||
| 02111036 | Stahlwille Tools | Socket: specialist; 12-angles,socket spanner; 36mm; 3/8" |
| 0 | ||
| 58221036 | Stahlwille Tools | Wrench tip; torque,socket spanner,box; Spanner: 36mm |
| 0 | ||
| 58631036 | Stahlwille Tools | Wrench tip; torque,socket spanner,flare nut wrench; 5/8" |
| 0 | ||
| 561-03688 | HellermannTyton | Marker: cable; Marking: 8; 4.3÷5.3mm; polyamide; grey; push-in; WIC |
| 0 | ||
| 58211036 | Stahlwille Tools | Wrench tip; torque,spanner; Spanner: 36mm; Socket size: 22x28mm |
| 0 | ||
| 58621036 | Stahlwille Tools | Wrench tip; torque,socket spanner,box; 5/8"; 9x12mm |
| 0 | ||
| TC1103620000G | Amphenol Anytek | Connector: PCB terminal block; terminal; power supply; TC; 16A |
| 0 | ||
 Ameya Holding Limited | 2SA1036KT146R | ROHM Semiconductor | Driver Transistor RoHS : Compliant |
| 8,500 | |
| QLN-1036-0-50PSP-TR-02-0 | Qualcomm | 2,980 | ||||
| 2SA1036KT146Q | ROHM Semiconductor | Driver Transistor RoHS : Compliant |
| 2,960 | ||
| ASP-103612-01 | Samtec Inc | Samtec PCB连接器套, 114路, 1.27mm节距, 6行, 表面贴装, 夹层卡连接器 RoHS : Not Compliant | 10 | |||
 ComSIT USA | FAB0103601BA | WUS (KUNSHAN) | AVAILABLE EU | 835 | ||
ComSIT USA | RC1206JR1036R | YAGEO Corporation | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 36ohm, 200V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 14,083 | ||
| CRCW201036R0FKTFBC | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 0.75W, 36ohm, 400V, 1% +/-Tol, -100,100ppm/Cel, 2010 RoHS : Compliant | 4,000 | |||
| CRCW201036K0JNEF | Vishay Intertechnologies | STANDARD THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.75W, 36000ohm, 400V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 2010 RoHS : Compliant | 4,000 | |||
| VLMU1610365135 | Vishay Intertechnologies | UV SMD LED WITH SILICONE LENS Single Color LED RoHS : Compliant | 3,000 | |||
| AD71036LARU | Analog Devices Inc | Electronic Component RoHS : Not Compliant | 1,690 | |||
| 51036722 | TE Connectivity | HDR ASSY, RTANG, SINGLE ROW 2.54 [100] CL, 0.64[.025] SQ POST, WITH PLZN AND HOLD DROWN Board Connector, 3 Contact(s), 1 Row(s), Male, Right Angle, Solder Terminal, Black Insulator RoHS : Compliant | 672 | |||
| 61083103602LF | Amphenol FCi | Board Stacking Connector, 100 Contact(s), 2 Row(s), Male, Straight, 0.032 inch Pitch, Surface Mount Terminal, Locking, Natural Insulator, Plug RoHS : Compliant | 450 | |||
| 11510360MTFXS0 | MPE-Garry GmbH | Board Connector, 36 Contact(s), 1 Row(s), Female, Straight, Solder Terminal RoHS : Compliant | 250 | |||
| 920351036 | TE Connectivity | RECT CONN Header Male Pin Through Hole, Right Angle 44 POS 2.5mm Solder Tin RoHS : Compliant | 240 | |||
| 61036399 | TE Connectivity | HDR ASSY, VERT, SINGLE ROW 2.54 [.100] C/L 0.64 [.025] SQ POST, WITH PLZN AND LATCHING, AMPMODU MTE Board Connector, 20 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, Black Insulator RoHS : Compliant | 50 | |||
| 51036733 | TE Connectivity | Board Connector, 4 Contact(s), 1 Row(s), Male, Right Angle, Solder Terminal RoHS : Not Compliant | 42 | |||
| 4,41036E+13 | Gould Fiber Optics | Electronic Component RoHS : Not Compliant | 22 | |||
| ATMEGA1036AC | Atmel Corporation | 8-BIT AVR MICROCONTROLLER WITH 128K BYTES IN-SYSTEM PROGRAMMABLE FLASH RISC Microcontroller, 8-Bit, FLASH, AVR RISC CPU, 6MHz, CMOS, PQFP64 RoHS : Not Compliant | 4 | |||
 Interstate Connecting Components | 2103-632-AL | RAF Electronic Hardware | HEX F STANDOFF NO PLATE 1/4 HEX X 7/16 LNGTH |
| 122 | |
| 131036-1 | TE Connectivity | COAX CONN BNC ASSY PLUG RoHS : Compliant |
| 0 | ||
| 142-1731-036 | Cinch Connectivity Solutions | 0 | ||||
| 103648-5 | TE Connectivity | 06 MTE RCPT HSG SR RIB .100CL RoHS : Compliant |
| 0 | ||
| 095-900-641-036 | Amphenol RF | MMCX STRAIGHT PLUG TO TNC STRA | 0 | |||
| 2M801-036-16M9-19PA | Amphenol Aerospace | 2M801 PLG 19#23 PIN 'A' ENP | 0 | |||
| 2M801-036-16MT10-26PC | Amphenol Aerospace | 2M801 PLUG PIN KEY C, DURMALON | 0 | |||
| 55A1131-10-3/6/9-9 | TE Connectivity | 55A1131-10-3/6/9-9 RoHS : Compliant |
| 0 | ||
| 43-01036 | Conec Corporation | SAL-12-FSH5-P12 RoHS : Compliant | 0 | |||
| 43-10360 | Conec Corporation | SAL-12S-RS5.1-2G3 RoHS : Compliant | 0 | |||
| VN0103600211C | Amphenol Sine Systems | C146 MALE CONTACT 3.6 MM FOR 1 | 0 | |||
| UE863G862010361 | Amphenol FCi | 2X8 CAGE/CONN COMBO,4 LP NORMA | 0 | |||
| UE863G862010361 | Amphenol High Speed Interconnects |
| 0 | |||
| TC2103620000G | Amphenol Anytek | TC-5.0-21P BLUE - ZINC TAIL | 0 | |||
| 20011036-00 | TE Connectivity | 53AF-0500-047-07 | 0 | |||
 PEI Genesis | VN01-036-0010-1 | Amphenol Tuchel |
| 0 | ||
| 21-033011-036 | Amphenol Corporation |
| 0 | |||
| 175101-10-36.00 | Amphenol RF |
| 0 | |||
| VN01-036-0014-1 | Amphenol Tuchel |
| 0 | |||
| 095-850-131-036 | Amphenol RF |
| 0 | |||
| 10-369342-022 | Amphenol Corporation |
| 0 | |||
| 93-610367-BLG | Amphenol Corporation |
| 0 | |||
| M85049/10-36Z | Amphenol PCD |
| 0 | |||
| T3-4010-36LD | Amphenol Corporation |
| 0 | |||
| 1S1036 | Anderson Power Products |
| 0 | |||
| VN01-036-0009-1 | Amphenol Tuchel |
| 0 | |||
| CPD171036-001 | SOURIAU-SUNBANK |
| 0 | |||
| K1036 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 93-610367-BLP | Amphenol Corporation |
| 0 | |||
| M85049/10-36W | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | 103653-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 8,842 | |
| 103648-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 3,374 | ||
| 103634-3 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 2,007 | ||
| 2-103634-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1,700 | ||
| 103638-8 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 782 | ||
| 1-103635-3 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 541 | ||
| 1-103682-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 518 | ||
| VP-10361 | Honeywell Sensing and Control | Switch |
| 202 | ||
| 103639-4 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 116 | ||
| ESW-103-69-F-D | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 106 | ||
| 10-36531-5P | Amphenol Corporation | CONNECTOR |
| 51 | ||
| 1-1103638-1 | TE Connectivity | Unspecified Connectors RoHS : Compliant |
| 24 | ||
| 103634-2 | TE Connectivity | 03 MTE HDR SRRA LATCH .100CL RoHS : Not Compliant |
| 20 | ||
| 1-100103-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 20 | ||
| UE863G862010361 | Amphenol Corporation | Connector |
| 13 | ||
 PUI | 12.71036 | Geyer Electronic E K | 160 | |||
 Richardson RFPD | 142-1731-036 | Cinch Connectivity Solutions | Conn SMA 0Hz to 18GHz 50Ohm Solder ST Panel Mount RoHS : Compliant | 0 | ||
| 0TD01D010360-LF-C | W L Gore & Associates | PHASEFLEX 0.315 inch OD Stranded center conductor; RoHS : Not Compliant | 0 | |||
| 4YR01R010360 | W L Gore & Associates | RF Std Cable Assy RoHS : Compliant | 0 | |||
| SI5332FD10368-GM1 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 32-P RoHS : Compliant | 0 | |||
| SI5332FD10368-GM1R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 32-P RoHS : Compliant | 0 | |||
| SI5335B-B11036-GMR | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| WMEA1036DU | Wall Industries Inc | 36 Watt AC/DC Wall Mount Power Supplies 07/22/2013 | 0 | |||
| WMEM1036D5 | Wall Industries Inc | Medical AC/DC Wall Mount Power Supplies | 0 | |||
| G5R01R010360 | W L Gore & Associates | Cable Assembly Accessory RoHS : Compliant | 0 | |||
| 1306.4671.00/0RD02D01036.0 | W L Gore & Associates | RF CUSTOM CABLE ASSY RoHS : Not Compliant | 0 | |||
| 0TD01D010360-C | W L Gore & Associates | 0.315 inch OD Stranded center conductor; Ruggedize RoHS : Not Compliant | 0 | |||
| WMEM1036EU | Wall Industries Inc | Medical AC/DC Wall Mount Power Supplies RoHS : Compliant | 0 | |||
| PSEP211036A0 | Wall Industries Inc | AC/DC Open Frame Power Supply RoHS : Compliant | 0 | |||
| 0ND01D010360 | W L Gore & Associates | RFTEST CABLE ASSY RoHS : Not Compliant | 0 | |||
| 0NR01R010360-C | W L Gore & Associates | 0.210 inch OD Solid center conductor; Ruggedized a RoHS : Not Compliant | 0 | |||
 Avnet Abacus | 6-103634-1 | TE Connectivity | Pin Header WiretoBoard 254 mm 1 Rows 12 Contacts Through Hole Right Angle AMPMODU MTE (Alt: 6-103634-1) RoHS : Compliant | 8,576 | ||
| 5-103673-3 | TE Connectivity | Pin Header WiretoBoard 254 mm 1 Rows 4 Contacts Through Hole Right Angle MTE (Alt: 5-103673-3) RoHS : Compliant | 6,048 | |||
| 5-103635-4 | TE Connectivity | (Alt: 5-103635-4) RoHS : Compliant | 4,480 | |||
| 5-103635-1 | TE Connectivity | (Alt: 5-103635-1) RoHS : Compliant | 3,834 | |||
| 5-103634-3 | TE Connectivity | Pin Header WiretoBoard 254 mm 1 Rows 4 Contacts Through Hole Right Angle MTE (Alt: 5-103634-3) RoHS : Compliant | 3,570 | |||
| 5-103639-2 | TE Connectivity | Pin Header WiretoBoard 254 mm 1 Rows 3 Contacts Through Hole Straight MTE (Alt: 5-103639-2) RoHS : Compliant | 1,855 | |||
| 1SNG601036R0000 | TE Connectivity | Cable Gland M16 x 15 4 mm 8 mm Nylon 6 Polyamide 6 Black IP68 (Alt: 1SNG601036R0000) RoHS : Compliant | 1,500 | |||
| 15311036 | Molex | Pin Header Power 67 mm 1 Rows 3 Contacts Through Hole Straight Standard 093 5219 (Alt: 15311036) RoHS : Compliant | 1,330 | |||
| 1910364 | Phoenix Contact | FKC 25 3ST FKC253ST (Alt: 1910364) RoHS : Compliant | 300 | |||
| N010366501001 | Amphenol Corporation | Rectangular Power Contact boardmate Series Pin Press Fit (Alt: N010366501001) RoHS : Compliant | 100 | |||
| VN0103600011C | Amphenol Corporation | Contact PIN Crimp ST Reel (Alt: VN0103600011C) RoHS : Compliant | 25 | |||
| VN0103600041C | Amphenol Corporation | Contact PIN Crimp ST Reel (Alt: VN0103600041C) RoHS : Compliant | 5 | |||
| VN0103600081 | Amphenol Corporation | Contact PIN Crimp ST Cable Mount (Alt: VN0103600081) RoHS : Compliant | 1 | |||
| VN0103600021C | Amphenol Corporation | Contact PIN Crimp ST Cable Mount Reel (Alt: VN0103600021C) RoHS : Compliant | 1 | |||
| VN0103600051C | Amphenol Corporation | Pin contact 100 pcs (Alt: VN0103600051C) RoHS : Compliant | 1 | |||
Avnet Asia | R5F10368ASP#55 | Renesas Electronics Corporation | Microcontroller 16 Bit RL78 CISC 8KB Flash 768B RAM 1.8V to 5.5V 20-Pin LSSOP (Alt: R5F10368ASP#55) RoHS : Compliant | 4,000 | ||
| 0761701036 | Molex | Connector, Backplane, 54 Contacts, 9 Rows, 6 Columns, THT, Right Angle, Gold, 25 GBPS (Alt: 0761701036) RoHS : Compliant | 2,898 | |||
| R5F10368ASP#35 | Renesas Electronics Corporation | Microcontroller 16 Bit RL78 CISC 8KB Flash 768B RAM 1.8V to 5.5V 20-Pin LSSOP (Alt: R5F10368ASP#35) RoHS : Compliant | 65 | |||
| ECS-163.84-10-36B2-CTN-TR | ECS International Inc | Crystal 16.386MHz 10pF 4-Pin SMD ECX-2236B2 T/R (Alt: ECS-163.84-10-36B2-CTN-TR) RoHS : Compliant | 0 | |||
| TJ0451036YG0G | Amphenol Corporation | SPEAKER TERMINAL UPPER WITH SILKPRINT (Alt: TJ0451036YG0G) RoHS : Compliant | 0 | |||
| ECS-250-10-36Q-AES-TR | ECS International Inc | (Alt: ECS-250-10-36Q-AES-TR) RoHS : Compliant |
| 0 | ||
| ECS-160-10-36-CKM-TR3 | ECS International Inc | (Alt: ECS-160-10-36-CKM-TR3) RoHS : Compliant |
| 0 | ||
| R5F10367ASP#35 | Renesas Electronics Corporation | 16 Bit Microcontroller, RL78 Family, RL78/G1x Series, RL78/G12 Group Microcontrollers, RL78 (Alt: R5F10367ASP#35) RoHS : Compliant | 0 | |||
| CRCW201036R0JNEF | Vishay Intertechnologies | (Alt: CRCW201036R0JNEF) RoHS : Compliant | 0 | |||
| 5-103669-1 | TE Connectivity | (Alt: 5-103669-1) RoHS : Compliant | 0 | |||
| 0015311036 | Molex | (Alt: 0015311036) RoHS : Compliant | 0 | |||
| ECS-120-10-36B-CWY-TR | ECS International Inc | Crystal, Standard, 12 MHz, SMD, 2.5mm x 2mm x 0.55mm, 15 ppm, 10 pF, 10 ppm, ECX-2236B (Alt: ECS-120-10-36B-CWY-TR) RoHS : Compliant | 0 | |||
| 10141036-405C000LF | Amphenol Corporation | (Alt: 10141036-405C000LF) RoHS : Compliant | 0 | |||
| ECS-240-10-36Q-AES-TR | ECS International Inc | (Alt: ECS-240-10-36Q-AES-TR) RoHS : Compliant | 0 | |||
| 5-103673-3 | TE Connectivity | (Alt: 5-103673-3) RoHS : Compliant | 0 | |||
 Avnet Silica | QPB1036TR7 | Qorvo | SBAND SWITCHED FILTER BANK 6 CHANNELS (Alt: QPB1036TR7) RoHS : Compliant | 0 | ||
| OM11036,598 | NXP Semiconductors | Keil LPC1758 Series Microcontroller Evaluation Board (Alt: OM11036,598) RoHS : Compliant | 0 | |||
| 2SA1036KT146R | ROHM Semiconductor | (Alt: 2SA1036KT146R) RoHS : Compliant | 0 | |||
| R5F10369ASP#55 | Renesas Electronics Corporation | (Alt: R5F10369ASP#55) RoHS : Compliant | 0 | |||
| R5F10369ASP#35 | Renesas Electronics Corporation | (Alt: R5F10369ASP#35) RoHS : Compliant | 0 | |||
| R5F10369ASM#55 | Renesas Electronics Corporation | (Alt: R5F10369ASM#55) RoHS : Compliant | 0 | |||
| R5F10368ASM#55 | Renesas Electronics Corporation | (Alt: R5F10368ASM#55) RoHS : Compliant | 0 | |||
| R5F10368ASM#15 | Renesas Electronics Corporation | (Alt: R5F10368ASM#15) RoHS : Compliant | 0 | |||
| R5F1036AASM#55 | Renesas Electronics Corporation | (Alt: R5F1036AASM#55) RoHS : Compliant | 0 | |||
| PIC32AK3208GC41036-I/M7 | Microchip Technology Inc | 32bit 200MHz MCU DPFPU 32K Flash 8K RAM 40Msps 12bit ADCs Op Amps Comp (Alt: PIC32AK3208GC41036-I/M7) RoHS : Compliant | 0 | |||
| C10365_PLATINUMROCKET3W | LEDIL | LENS ROUND 3 POS 50MM OD 156MM H (Alt: C10365_PLATINUMROCKET-3-W) RoHS : Compliant | 0 | |||
| PIC32AK1216GC41036-I/M7 | Microchip Technology Inc | 32bit 200MHz MCU DPFPU 128K Flash 16K RAM 40Msps 12bit ADCs Op AmpsComp (Alt: PIC32AK1216GC41036-I/M7) RoHS : Compliant | 0 | |||
| PIC32AK3208GC41036T-I/M7 | Microchip Technology Inc | 32bit 200MHz MCU DPFPU 32K Flash 8K RAM 40Msps 12bit ADCs Op Amps Comp (Alt: PIC32AK3208GC41036T-I/M7) RoHS : Compliant | 0 | |||
| C10367_PLATINUMROCKET-3-M | LEDIL | LENS ROUND 3 POS 50MM OD 156MM H (Alt: C10367_PLATINUMROCKET-3-M) RoHS : Compliant | 0 | |||
| C10366_PLATINUMROCKET-3-SS | LEDIL | LENS ROUND 3 POS 50MM OD 156MM H (Alt: C10366_PLATINUMROCKET-3-SS) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | RMC-1/10-361JT | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY | 4,800 | ||
| C61036-A29-C2 | Siemens | IN STOCK SHIP TODAY |
| 3,000 | ||
| 520-210-3.6864MHZ | MtronPTI | IN STOCK SHIP TODAY | 2,806 | |||
| 103639-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 511 | ||
| 0003121036 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 325 | ||
| 103638-9 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 283 | ||
| 103670-7 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 197 | ||
| 103638-7 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 163 | ||
| 103688-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| 80-6103-6199-2 | 3M | IN STOCK SHIP TODAY | 35 | |||
| 103682-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| 103653-6 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 9 | ||
| 103682-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| 80-6103-6218-0 | 3M | IN STOCK SHIP TODAY | 2 | |||
| PM1-03-650-LL | Vicor Power | IN STOCK SHIP TODAY |
| 2 | ||
 DB Roberts | 2103-632-AL | RAF Electronic Hardware | HEX F STANDOFF NO PLATE 1/4 HEX X 7/16 LNGTH | 0 | ||
| 10368 | Heyco | HLCBSC3-05 NATURAL | 0 | |||
| 7810-36BL-G1001 | Sugatsune Kogyo Co Ltd | CABINET LOCK | 0 | |||
| LW-1036-3-4-00 | Southco | 0 | ||||
| 11036 | Heyco | HLEDS1E-10 NATURAL | 0 | |||
| 47-10-362-50 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| LW-1036-1-24-00 | Southco | 0 | ||||
| LW-1036-3-20-00 | Southco | 0 | ||||
| LW-1036-5-4-00 | Southco | 0 | ||||
| 8103-632-A | RAF Electronic Hardware | 0 | ||||
| RDR111036A | Essentra Components | 0 | ||||
| 2103-632-S-14 | RAF Electronic Hardware | 0 | ||||
| 10360F | Heyco | HLCBSC2-05 V-0 NATURAL | 0 | |||
| 10362 | Heyco | HLCBSC2-07 NATURAL | 0 | |||
| 10367F | Heyco | HLCBSC3-04 V-0 NATURAL | 0 | |||
 EBV Elektronik | VLMU1610-365-135 | Vishay Intertechnologies | (Alt: VLMU1610-365-135) RoHS : Compliant | 81,000 | ||
| 61-036/GBRSB7W-B06/ET | Everlight Electronics Co Ltd | (Alt: 3961036006) RoHS : Compliant | 16,800 | |||
| MP-1616-2103-65-90 | Luminus Devices | (Alt: MP-1616-2103-65-90) RoHS : Compliant | 12,000 | |||
| HCPL-7510-360E | Broadcom Limited | OptoCoupler 1CH 8Pin PDIP SMD Tube (Alt: HCPL-7510-360E) RoHS : Compliant | 0 | |||
| HCPL-7710-360E | Broadcom Limited | Optocoupler LogicOut PushPull Logic BufferIN 1CH 8Pin PDIP SMD Tube (Alt: HCPL-7710-360E) RoHS : Compliant | 0 | |||
| SI1036X-T1-GE3 | Vishay Intertechnologies | (Alt: SI1036X-T1-GE3) RoHS : Compliant | 0 | |||
| MP-1616-1103-65-90 | Luminus Devices | (Alt: MP-1616-1103-65-90) RoHS : Compliant | 0 | |||
| MP-1616-1103-65-80 | Luminus Devices | (Alt: MP-1616-1103-65-80) RoHS : Compliant | 0 | |||
| MP-1616-2103-65-90-M3 | Luminus Devices | SMD LED CCT 6500K CRI 90 (Alt: MP-1616-2103-65-90-M3) RoHS : Compliant | 0 | |||
| CM8071505103612S RNJH | Intel Corporation | Intel Core i9 processor 14901E 36M Cache up to 560 GHz FCLGA16A Tray (Alt: 99CHCA) RoHS : Compliant | 0 | |||
| PIC32AK3208GC41036-I/M7 | Microchip Technology Inc | 32bit 200MHz MCU DPFPU 32K Flash 8K RAM 40Msps 12bit ADCs Op Amps Comp (Alt: PIC32AK3208GC41036-I/M7) RoHS : Compliant | 0 | |||
| C10365_PLATINUMROCKET3W | LEDIL | LENS ROUND 3 POS 50MM OD 156MM H (Alt: C10365_PLATINUMROCKET-3-W) RoHS : Compliant | 0 | |||
| PIC32AK1216GC41036-I/M7 | Microchip Technology Inc | 32bit 200MHz MCU DPFPU 128K Flash 16K RAM 40Msps 12bit ADCs Op AmpsComp (Alt: PIC32AK1216GC41036-I/M7) RoHS : Compliant | 0 | |||
| PIC32AK6416GC41036-I/M7 | Microchip Technology Inc | 32bit 200MHz MCU DPFPU 64K Flash 16K RAM 40Msps 12bit ADCs Op Amps Comp (Alt: PIC32AK6416GC41036-I/M7) RoHS : Compliant | 0 | |||
| C10366_PLATINUMROCKET-3-SS | LEDIL | LENS ROUND 3 POS 50MM OD 156MM H (Alt: C10366_PLATINUMROCKET-3-SS) RoHS : Compliant | 0 | |||
 Flip Electronics | R5F10369ASP#V5 | Renesas Electronics Corporation | Stock, Ship Today RoHS : Compliant |
| 290 | |
| R5F10367ASP#V5 | Renesas Electronics Corporation | Stock, Ship Today RoHS : Compliant |
| 30 | ||
| R5F1036AASP#V0 | Renesas Electronics Corporation | Stock, Ship Today RoHS : Compliant |
| 10 | ||
 Maritex | 103653-4 | TE Connectivity | Rectangular Connector Housings; 103653-4; TE CONNECTIVITY; 1; 5; Black; Straight RoHS : Compliant |
| 13,322 | |
| 103653-1 | TE Connectivity | Rectangular Connector Housings; 103653-1; TE CONNECTIVITY; 1; 2; Black; Straight RoHS : Compliant |
| 11,248 | ||
| 5-103673-3 | TE Connectivity | Rectangular Connector Housings; 5-103673-3; TE CONNECTIVITY; 1; 4; Black; Right Angle RoHS : Compliant |
| 371 | ||
| C0710-36FEASL0R | Hsuan Mao Technology Co | Centronics connector; female; for cable; 36 contacts; straight |
| 30 | ||
| C10365_PLATINUMROCKET-3-W | LEDIL | Lens for LED high power; angle: 40 to 46 degrees FWHM; Number of LEDs: 3; Dimensions: round 50mm; Height: 15.6mm; meterial: PMMA; Fastening: glue; pin |
| 15 | ||
| 103653-2 | TE Connectivity | Rectangular Connector Housings; 103653-2; TE CONNECTIVITY; 1; 3; Black; Straight RoHS : Compliant |
| 8 | ||
| 5-103635-5 | TE Connectivity | Male Pin Headers; 5-103635-5; TE CONNECTIVITY; 1; Right Angle; Gold, Tin; 6 RoHS : Compliant |
| 5 | ||
| 11-0360-LG | Koncept Inc | Wall mount system for Datalogic QuickScan readers |
| 1 | ||
 Master Electronics | 103648-5 | TE Connectivity | 06 MTE RCPT HSG SR RIB .100CL RoHS : Compliant |
| 5,112 | |
| 2103-632-AL | RAF Electronic Hardware | Standoff Hex Aluminum Female 6-32 0.437 (11.1 mm) | RAF 2103-632-AL RoHS : Compliant |
| 111 | ||
| 2-103634-5 | TE Connectivity | 03 MTE HDR SRRA LATCH .100CL RoHS : Compliant |
| 0 | ||
| 131036-1 | TE Connectivity | COAX CONN BNC ASSY PLUG MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1036727 | Phoenix Contact | Light guides - passive - rigid RoHS : Compliant |
| 0 | ||
| 0808671:0361 | Phoenix Contact | Zack marker strip flat - 10-section - horizontally labeled with the consecutive numbers: 361 ... 370 - white RoHS : Compliant |
| 0 | ||
| 095-900-641-036 | Amphenol RF | RoHS : Compliant |
| 0 | ||
| 097391-0367 | ITT Interconnect Solutions | Conn Micro D-Subminiature SKT 100 POS Solder ST Thru-Hole 100 Terminal 1 Port RoHS : Not Compliant |
| 0 | ||
| 1-103638-6 | TE Connectivity | 17 MTE HDR SRST LATCH .100CL MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 1-103644-9 | TE Connectivity | 20 MTE RCPT SR LATCH .100CL MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 1-103688-1 | TE Connectivity | 12 MTE RCPT HSG SR PLAIN .100 RoHS : Compliant |
| 0 | ||
| 1-6609103-6 | TE Connectivity | Power Entry Module EMI/RFI Filtered M 3 POS 250VAC 3A Fuse/Voltage Selector ST 1 Port MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55A1131-10-3/6/9-9 | TE Connectivity | 55A1131-10-3/6/9-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| SFSD-20-28-G-10.36-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZLTMM-103-62-LM-D-250 | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W04810-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Female Bulkhead to MCX Plug Right Angle Low Loss Cable 36 Inch Length Using LMR-195 Coax., Radio frequency assembly TNC female bulkhead to MCX plug right angle low loss cable 36 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to MCX plug right angle low loss cable 36 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and right angle MCX cable connection on the other. Our low loss TNC to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. PE3W04810-36 can also be known as a low loss TNC jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. TNC jack to MCX male cable assembly PE3W04810-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle MCX cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04810-36 can also be used in the other direction and will be right angle MCX plug to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to MCX cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to MCX plug right angle low loss cable 36 inch length using LMR-195 coax. |
| 1,328 | |
| PE3W10910-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. UHF Male to SMA Male Low Loss Cable 36 Inch Length Using LMR-400-UF Coax., Radio frequency assembly UHF male to SMA male low loss cable 36 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The UHF male to SMA male low loss cable 36 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a UHF cable connection on one end and a SMA cable connection on the other. Our low loss UHF to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W10910-36 can also be known as a low loss UHF plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10910-36 RF cable has a TPE jacket of 0.405-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. UHF plug to SMA plug cable assembly PE3W10910-36 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10910-36 can also be used in the other direction and will be a SMA male to UHF male cable assembly if the opposite connectivity is required. Low loss UHF plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to SMA cable assembly for quick shipment worldwide. Variations of UHF and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 605 | ||
| PE3W15210-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Limited Detent SMP Male Bulkhead to SMA Male Right Angle Cable 36 Inch Length Using PE-SR405FL Coax., Radio frequency assembly limited detent SMP male bulkhead to SMA male right angle cable 36 inch length using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The limited detent SMP male bulkhead to SMA male right angle cable 36 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP bulkhead cable connection on one end and a right angle SMA cable connection on the other. Our SMP to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W15210-36 can also be known as a SMP plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our bulkhead SMP male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMP plug to SMA plug cable assembly PE3W15210-36 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15210-36 can also be used in the other direction and will be a right angle SMA male to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMA RF cable assembly as per your requirements. |
| 410 | ||
| PE3W06410-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SSMC Plug Cable 36 Inch Length Using RG196 Coax., Radio frequency assembly SMA male to SSMC plug cable 36 inch length using RG196 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SSMC plug cable 36 inch length using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SSMC cable connection on the other. Our SMA to SSMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SSMC cable is a male to plug coax assembly, PE3W06410-36, can also be known as a SMA plug to SSMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMC male cable assembly PE3W06410-36 is built with RG196 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 400 MHz maximum frequency SMA male to SSMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06410-36 can also be used in the other direction and will be SSMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMC plug cable 36 inch length using RG196 coax. |
| 81 | ||
| PEANKIT1036 | Pasternack Enterprises | Key Specifications. Antenna Type Omni. Helium Hotspot PRO Antenna Upgrade Kit, 8dBi 800MHz Omni w/ N Male to RP-SMA Plug, 6ft Low Loss 400 Cable. The PEANKIT1036 EU Helium Hotspot PRO Antenna Upgrade Kit from Pasternack was designed with the serious Helium HNT Miner in mind. PEANKIT1036 provides your LongFi radio with the proper components to get the most out of your hotspot with optimized range, increased witnessing and Proof-of-Coverage over OEM components. The PEANKIT1036 achieves enhanced performance by utilizing Pasternack’s 800 MHz PRO-Series high-performance Omni-directional antennas designed for the 800 MHz European ISM band. These LoRa, LoRaWAN antennas feature a rugged 1.58" diameter UV-stable fiberglass radome for durability, aesthetics and long service life. The PEANKIT1036 comes with a 8 dBi Omni Antenna that operates from 824 MHz to 876 MHz frequency range. Combined with our Low Loss 400 series cable, the 400 cable features equal performance and mechanical characteristics to cables from CommScope®, Times Microwave Systems®, Belden® and Andrew®. This 6 ft Low Loss cable comes terminated with an N Male connector, to the antenna, and an RP-SMA Male connector compatible with the leading Hotspot miners on the market. The PEANKIT1036 from Pasternack brings industry proven components direct to the Helium enthusiast, ship worldwide the same day as with our other available RF parts. |
| 29 | ||
| PE3CA1036-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141EAM, RF Cable Type: PE-141FLEX, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Male Right Angle Cable 36 Inch Length Using PE-141FLEX Coax, RoHS., Radio frequency assembly SMA male to SMA male right angle cable 36 inch length using PE-141FLEX coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 36 inch length using PE-141FLEX coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3CA1036-36, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3CA1036-36 is built with PE-141FLEX which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 27 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1036-36 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 36 inch length using PE-141FLEX coax, RoHS. |
| 26 | ||
| PE3C9510-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated, Length, Max: 36 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable 36 Inch Length Using RG400 Coax., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable 36 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable 36 inch length using RG400 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9510-36 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9510-36 is built with RG400 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable 36 inch length using RG400 coax. |
| 6 | ||
| PE3C10369-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. Fire Rated 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 180 Inch Length Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 7/16 DIN male to 7/16 DIN male low PIM cable 180 inch length using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 7/16 DIN male to 7/16 DIN male low PIM cable 180 inch length using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 7/16 DIN to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10369-180 can also be known as a low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10369-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C10369-180 is built with TCOM-600-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3510-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Male Right Angle Cable 36 Inch Length Using RG188 Coax., Radio frequency assembly SMA male to SMA male right angle cable 36 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 36 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3510-36, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3510-36 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3510-36 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 36 inch length using RG188 coax. |
| 0 | ||
| PE3C10366-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male to N Male Low PIM Cable 24 Inch Length Using TCOM-600 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to N male low PIM cable 24 inch length using TCOM-600 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to N male low PIM cable 24 inch length using TCOM-600 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM a 4.3-10 to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10366-24 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10366-24 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to type N plug cable assembly PE3C10366-24 is built with TCOM-600 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10366-24 can also be used in the other direction and will be type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W03310-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 36 inches. MCX Plug to TNC Female Bulkhead Cable 36 Inch Length Using RG174 Coax., Radio frequency assembly MCX plug to TNC female bulkhead cable 36 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug to TNC female bulkhead cable 36 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and TNC bulkhead cable connection on the other. Our MCX to TNC cable assemblies have a plug gender on end 1 and female on end 2. This MCX to TNC cable is a plug to female coax assembly, PE3W03310-36, can also be known as a MCX male to TNC jack cable assembly and will be shipped same-day as it is purchased. MCX male to TNC jack cable assembly PE3W03310-36 is built with RG174 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX plug to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03310-36 can also be used in the other direction and will be TNC female bulkhead to MCX plug cable assembly if the opposite connectivity is required. MCX male to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to TNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to TNC female bulkhead cable 36 inch length using RG174 coax. |
| 0 | ||
| PE3C10364-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Low PIM Cable 48 Inch Length Using TCOM-600 Coax With Times Microwave Components., Radio frequency assembly N male to N male low PIM cable 48 inch length using TCOM-600 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male low PIM cable 48 inch length using TCOM-600 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10364-48 can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10364-48 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. Type N plug to type N plug cable assembly PE3C10364-48 is built with TCOM-600 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10366 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm. 4.3-10 Male to N Male Low PIM Cable Using TCOM-600 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to N male low PIM cable using TCOM-600 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to N male low PIM cable using TCOM-600 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM a 4.3-10 to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10366 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10366 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to type N plug cable assembly PE3C10366 is built with TCOM-600 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10366 can also be used in the other direction and will be type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3C8310-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Female Bulkhead to N Male Right Angle Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 female bulkhead to N male right angle low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 female bulkhead to N male right angle low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 bulkhead cable connection on one end and a right angle type N cable connection on the other. Our low PIM 4.3-10 to right angle type N cable assembly has a female gender on end 1 and a male on end 2. PE3C8310-36 can also be known as a low PIM 4.3-10 jack to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.867-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8310-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our bulkhead 4.3-10 female to right angle type N male cable has a maximum VSWR of 1.4:1. 4.3-10 jack to type N plug cable assembly PE3C8310-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8310-36 can also be used in the other direction and will be a right angle type N male to 4.3-10 female bulkhead cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack bulkhead to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3CA1036-11 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141EAM, RF Cable Type: PE-141FLEX, RF Cable Impedance: 50 Ohm, Length: 11 inches. SMA Male to SMA Male Right Angle Cable 11 Inch Length Using PE-141FLEX Coax, RoHS., Radio frequency assembly SMA male to SMA male right angle cable 11 inch length using PE-141FLEX coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 11 inch length using PE-141FLEX coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3CA1036-11, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3CA1036-11 is built with PE-141FLEX which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 27 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1036-11 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 11 inch length using PE-141FLEX coax, RoHS. |
| 0 | ||
 Vyrian | M38510/36101SEA | Texas Instruments | D Latch, LS Series, 1-Func, Positive Edge Triggered, 4-Bit, True Output, TTL, CDIP16 RoHS : Not Compliant | 9,704 | ||
SNJ54AS1036AJ | Texas Instruments | NOR Gate, AS Series, 4-Func, 2-Input, TTL, CDIP14 RoHS : Not Compliant | 7,447 | |||
| 81036082X | Texas Instruments | OT PLD, 25ns, TTL, CQCC20 | 7,236 | |||
| 1-1103638-1 | TE Connectivity | Rectangular Connector RoHS : Compliant | 6,787 | |||
| 103682-7 | TE Connectivity | Connector Accessory, Polyethylene RoHS : Compliant | 6,093 | |||
M38510/36101BEA | Texas Instruments | D Latch, LS Series, 1-Func, Positive Edge Triggered, 4-Bit, True Output, TTL, CDIP16 RoHS : Not Compliant | 6,018 | |||
| 8103608SA | Texas Instruments | OT PLD, 25ns, PAL-Type, TTL, CDFP20 RoHS : Not Compliant | 5,852 | |||
| HCPL-7510-360E | Broadcom Limited | RoHS : Compliant | 5,480 | |||
| MPD10369J | Texas Instruments | 4,547 | ||||
SN74AS1036ADR | Texas Instruments | NOR Gate, AS Series, 4-Func, 2-Input, TTL, PDSO14 RoHS : Not Compliant | 4,000 | |||
| SN1701036DSNR | Texas Instruments | 3,952 | ||||
| SNJ54AS1036AW | Texas Instruments | 3,489 | ||||
| 103634-3 | TE Connectivity | Board Connector, 4 Contact(s), 1 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch, Black Insulator, Receptacle RoHS : Not Compliant | 1,016 | |||
| LM1036MX/NOPB | National Semiconductor Corporation | Tone Control Circuit, Bipolar, PDSO20 RoHS : Compliant | 349 | |||
| R5F1036AASP#V0 | Renesas Electronics Corporation | Microcontroller, 16-Bit, FLASH, RL78 CPU, 24MHz, CMOS, PDSO20 RoHS : Compliant | 335 | |||
 Waytek, Inc. | TS51036.7 | tesa UK Ltd | Tesa TS51036.7 Anti-Abrasion Wire Harness Tape is black PVDC7 tape in a 3/4" x 82' roll with advanced acrylic adhesive. It provides exceptionally high abrasion protection, high flexibility, and minimal adhesive contact to wires for small pigtail harness applications. |
| 7,100 | |
| TS51036 1. | tesa UK Ltd | Tesa TS51036 1. Anti-Abrasion Wire Harness Tape is black PVDC7 tape in a 1" x 82' roll with advanced acrylic adhesive. It provides exceptionally high abrasion protection, high flexibility, and minimal adhesive contact to wires for small pigtail harness applications. |
| 1,608 | ||
| 57360 OR 611-036 | Ideal Clamp Products Inc | Standard Stainless Steel Band Hose Clamp #36 Band 1/2" 3/4" TO 2-3/4" |
| 1,141 | ||
| 211036-0002 | Unity Manufacturing Co Ltd | 6" Black Post-Mount Spotlight Unity 211036-0002 LED 30 W 12V 215,000 CANDLE 50,000 HOURS |
| 9 | ||
| TS51036.7OR | tesa UK Ltd | Tesa TS51036.7 anti-abrasion wire harness tape is orange 3/4" x 82' tape with double-layer PET cloth and advanced acrylic adhesive. Rated from -40F to 302F, it provides Class E/Class D abrasion resistance, high flexibility, and minimal adhesive contact for small pigtail harnesses. |
| 0 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand