| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty.
BuyNow |
TME | 2108517-2
| TE Connectivity | Antenna: communication; Bluetooth,WiFi,ZigBee; 3dBi; SMD; 50Ω
RoHS : Compliant | 10,500 : $0.229
9,000 : $0.258
4,500 : $0.263
3,000 : $0.272
1,500 : $0.284
|
| 99,000
 |
008301085 000 100
| RECA | Screw; M10; M10x85; Head: cheese head; hex key; HEX 8mm; steel | 1,000 : $2.42
500 : $2.59
100 : $2.76
|
| 0
 |
1058510850
| Weidmüller Interface GmbH & Co. KG | Cable: for sensors; M12; PIN: 5; male,female; shielded,straight
RoHS : Compliant | | 0
|
108 515
| RUKO GmbH | Drill bit; core; Ø: 15mm; L: 88mm; high speed steel; weldon; 3/4" | 10 : $52.8
5 : $56.86
1 : $81.22
|
| 0
|
108 517 F
| RUKO GmbH | Drill bit; core; Ø: 17mm; L: 88mm; high speed steel; weldon; 3/4" | 10 : $97.28
5 : $104.76
1 : $149.66
|
| 0
|
108 521 F
| RUKO GmbH | Drill bit; core; Ø: 21mm; L: 88mm; high speed steel; weldon; 3/4" | 10 : $115.13
5 : $123.98
1 : $177.12
|
| 0
|
108 545 E
| RUKO GmbH | Drill bit; core; Ø: 45mm; L: 88mm; high speed steel cobalt HSS-E | 10 : $239.26
5 : $257.67
1 : $368.1
|
| 0
|
108 556
| RUKO GmbH | Drill bit; core; Ø: 56mm; L: 88mm; high speed steel; weldon; 3/4" | 10 : $251.79
5 : $271.16
1 : $387.38
|
| 0
|
108 560
| RUKO GmbH | Drill bit; core; Ø: 60mm; L: 88mm; high speed steel; weldon; 3/4" | 10 : $265.85
5 : $286.31
1 : $409.0
|
| 0
|
7000-08801-6010850
| Murrelektronik GmbH | Cable: for sensors; PIN: 4; M8 female; angled; 8.5m; plug; 60VDC
RoHS : Compliant | 10 : $25.62
5 : $27.38
1 : $29.15
|
| 0
|
99 9108 50 03
| Binder UK Ltd | Connector: circular; 720; 250V; 7A; PIN: 3; socket; female; soldering | 100 : $5.88
20 : $6.72
5 : $7.56
1 : $8.4
|
| 0
|
0031.1085
| Schurter Electronic Components | Fuse holder; 5x20mm; 10A; 250V; 250VAC; FEF; on panel; black; IP40 | | 0
|
008310 85 000 100
| RECA | Screw; M10; M10x85; Head: cheese head; hex key; HEX 8mm; steel; none | 1,000 : $0.485
500 : $0.52
100 : $0.555
|
| 0
|
029-1085
| Antistat | Carrier tape; ESD; 16mm; 250pcs; black | | 0
|
108 516
| RUKO GmbH | Drill bit; core; Ø: 16mm; L: 88mm; high speed steel; weldon; 3/4" | 10 : $52.95
5 : $57.02
1 : $81.46
|
| 0
|
ComSIT USA | LT1085CTPBF
| LINEAR TECHNOLOGY/ANALOG DEVICES | AVAILABLE EU | | 2
|
1085880000
| Weidmüller Interface GmbH & Co. KG | AVAILABLE EU
RoHS : Compliant | | 1,897
|
GLYN GmbH & Co. KG | ES51085FLW
| Emerging Display Technolgies | LCD 128 x 64, FSTN positive, white LED Sitronix S | | 17
|
NexGen Digital | LT1085CT-3.3
 | Linear Technology |
RoHS : Not Compliant | | 15
|
Richardson RFPD | SMP1331-085LF
| Skyworks Solutions Inc | Diode PIN Attenuator/Switch 200V 200mA 2-Pin QFN E
RoHS : Compliant | | 0
|
512QCA001085AAGR
| Skyworks Solutions Inc | Oscillator XO 50MHz/ 200MHz ±30ppm CMOS 52% 2.5V 6
RoHS : Compliant | | 0
|
LT1085CT-5#PBF
| Analog Devices Inc | LDO Regulator Pos 5V 3A 3-Pin(3+Tab) TO-220 Tube
RoHS : Compliant | | 0
|
SMP1321-085-EVB
| Skyworks Solutions Inc | RF PIN DIODE
RoHS : Compliant | | 0
|
SI5332FD10859-GM1R
| Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 32-P
RoHS : Compliant | | 0
|
SI5338A-B01085-GM
| Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi
RoHS : Compliant | | 0
|
LT1085CM#PBF
| Analog Devices Inc | LDO Regulator Pos 1.25V to 28.5V 3A 4-Pin(3+Tab) D
RoHS : Compliant | | 0
|
LT1085CM-3.3#TRPBF
| Analog Devices Inc | LDO Regulator Pos 3.3V 3A 4-Pin(3+Tab) DDPAK T/R
RoHS : Compliant | | 0
|
LT1085CT-12#PBF
| Analog Devices Inc | LDO Regulator Pos 12V 3A 3-Pin(3+Tab) TO-220 Tube
RoHS : Compliant | | 0
|
ATS-FPX035035010-85-C3-R0
 | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Aluminum 6063 24.1C/W B
RoHS : Compliant | 1 : $3.01
5,000 : $2.39
100,009 : $2.32
|
| 0
|
ATS-PCBT1085
 | Advanced Thermal Solutions Inc | Heat Sink Passive TO-220 Vertical Aluminum 4.4C/W
RoHS : Compliant | 1 : $0.376
50,000 : $0.349
9 : $0.3091
|
| 0
|
SI5332FD10859-GM1
| Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 32-P
RoHS : Compliant | | 0
|
LT1085IM-3.6#TRPBF
| Analog Devices Inc | LDO Regulator Pos 3.6V 3A 4-Pin(3+Tab) DDPAK T/R
RoHS : Compliant | | 0
|
ATS-FPX035035010-85-C2-R0
 | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Screw Mount Aluminum 60
RoHS : Compliant | 1 : $3.18
5,000 : $2.52
100,009 : $2.46
|
| 0
|
CER1085A
| CTS Corporation | BAND PASS FILTER
RoHS : Compliant | | 0
|
Braemac Americas-Symmetry | WH-PS710-850
| Nipron Co | Peripheral cable | | 1
|
CAB.01085
| Taoglas Antenna Solutions | IPEX MHFI(U.FL) to 200mm 1.37mm Black SMA(F)BKST | | 0
|
WH-PP610-850
| Nipron Co |
RoHS : Compliant | | 0
|
DB Roberts | 1085A
| Essentra Components | PLUG 2.020 - 2.100 CAP 2.140 | | 0
|
E3-121-085
| Southco | | | 0
|
E5-1-085-021
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
E3-1011-0859
| Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | | 0
|
E5-1-085-020
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
E5-1-085-101
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
10852
| Heyco | HCPS-18 NATURAL | | 0
|
110859
| Essentra Components | | | 0
|
OPT2-610-8.5
| SHEREX FASTENING SO | | | 0
|
E5-1-085-160
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
E5-1-085-170
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
E5-1-085-190
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
110854
| Essentra Components | | | 0
|
07005-01085
| Avdel | POLY TUBE BLUE DIA 6 X 153MM | | 0
|
E5-1-085-051
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
EBV Elektronik | LD1085V
| STMicroelectronics | LDO Regulator Pos 125V to 28V 3A 3Pin3Tab TO220 Tube (Alt: LD1085V)
RoHS : Compliant | | 1,100
|
LD1085D2M-R
 | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2M-R)
RoHS : Compliant | | 1,000
|
LD1085D2T33R
| STMicroelectronics | LDO Regulator Pos 33V 3A 3Pin2Tab D2PAK TR (Alt: LD1085D2T33R)
RoHS : Compliant | | 1,000
|
VSMA1085600
| Vishay Intertechnologies | (Alt: VSMA1085600)
RoHS : Compliant | | 600
|
FP11085_LISA2-RS-CLIP
| LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11085_LISA2-RS-CLIP)
RoHS : Compliant | | 100
|
SIM7912G-M2 S2-1085F-Z306Z
| SIMCom | MultiBand LTEFDDLTETDDHSPA module (Alt: SIM7912G-M2 S2-1085F-Z306Z)
RoHS : Compliant | | 2
|
LD1085V50
| STMicroelectronics | LDO Regulator Pos 5V 3A 3Pin3Tab TO220 Tube (Alt: LD1085V50)
RoHS : Compliant | | 0
|
P3T1085UKZ
| NXP Semiconductors | Temperature Sensor IC Digital 05C 40 C 125 C WLCSP 6 Pins (Alt: P3T1085UKZ)
RoHS : Compliant | | 0
|
VSMA1085250
| Vishay Intertechnologies | (Alt: VSMA1085250)
RoHS : Compliant | | 0
|
STA1085ELA3
| STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085ELA3)
RoHS : Compliant | | 0
|
STA1085EOATR
| STMicroelectronics | MID INFOTAINMENT (Alt: STA1085EOATR)
RoHS : Compliant | | 0
|
P3T1085UK-ARD
| NXP Semiconductors | Evaluation Board P3T1085UK Digital Temperature Sensor Sensor (Alt: P3T1085UK-ARD)
RoHS : Compliant | | 0
|
VSMA1085750X02
| Vishay Intertechnologies | HiPow IR Emitting Diode 850nm e3 (Alt: VSMA1085750X02)
RoHS : Compliant | | 0
|
SIM7912G-M2 S2-1085D
| SIMCom | MultiBand LTEFDDLTETDDHSPA module (Alt: SIM7912G-M2 S2-1085D)
RoHS : Compliant | | 0
|
SIM7906E-PCIE S2-1085H
| SIMCom | Cellular Module DL CA LTEFDD LTETDD WCDMA 33V to 43V 30mm x 51mm x 43mm (Alt: SIM7906E-PCIE S2-1085H)
RoHS : Compliant | | 0
|
ECCO | 97-3102A-22(621)(0850)
| Amphenol Industrial Operations | | | 1,835
|
97-3106A-22(621)(0850)
| Amphenol Industrial Operations | | | 586
|
97-3106A-22(621)(0850)
| Amphenol Industrial Operations | | | 586
|
97-3102A-16(621)(0850)
| Amphenol Industrial Operations | | | 505
|
97-3100A-14S(621)(0850)
| Amphenol Industrial Operations | | | 428
|
97-3101A-14S(621)(0850)
| Amphenol Industrial Operations | | | 192
|
97-3108B-14S(621)(0850)
| Amphenol Industrial Operations | | | 72
|
97-3101A-18(621)(0850)
| Amphenol Industrial Operations | | | 50
|
97-3102A-16S(621)(0850)
| Amphenol Industrial Operations | | | 49
|
97-3102A-18(B)(621)(0850)
| Amphenol Industrial Operations | | | 41
|
97-3108A-16S(621)(0850)
| Amphenol Industrial Operations | | | 25
|
97-3101A-28(621)(0850)
| Amphenol Industrial Operations | | | 24
|
97-3108A-28(621)(0850)
| Amphenol Industrial Operations | | | 1
|
97-3100A-18(621)(0850)
| Amphenol Industrial Operations | | | 1
|
97-3100A-18(621)(0850)
| Amphenol Industrial Operations | | | 1
|
FDH Electronics | 512001085
| BJG Electronics | BJG Microwave C | | 1,785,834
|
512851085
| BJG Electronics | BJG Microwave C | | 1,785,834
|
512321085
| W L Gore & Associates | BJG Microwave C | | 1,693
|
M23053/5-108-5
| SUMITOMO ELECTRIC Industries Ltd | Harness Mgmt | | 730
|
8001085
| Ellsworth Adhesives | Consumable | | 300
|
PS10-851-N
| Connector Technology Inc | Circular Conn | 1 : $21.629
5 : $21.629
10 : $18.408
25 : $13.954
50 : $13.954
100 : $12.913
250 : $12.538
500 : $12.538
1,000 : $12.538
2,500 : $12.538
10,000 : $12.538
|
| 256
|
PS10-851-UP
| Connector Technology Inc | Connector Acc | | 224
|
J1085E-4S-3
| SOURIAU-SUNBANK | Backshells & Ac | | 6
|
J599EIE-1085/A10
| SOURIAU-SUNBANK | Connector 38999 | 1 : $17.255
5 : $16.085
10 : $14.379
25 : $14.164
50 : $14.164
100 : $13.956
250 : $13.557
500 : $13.181
1,000 : $13.0
2,500 : $13.0
10,000 : $13.0
|
| 4
|
TF-1085
| Connector Technology Inc | Tooling - Test | | 1
|
440HS148M2108-5S
| Glenair Inc | Backshells & Ac | | 0
|
M85049/10-85W
| Amphenol PCD | Backshells & Ac | 1 : $329.042
5 : $329.042
10 : $290.332
25 : $274.202
50 : $274.202
100 : $264.409
250 : $255.292
500 : $255.292
1,000 : $246.782
2,500 : $246.782
10,000 : $238.821
|
| 0
|
440HS069NF2108-5
| Glenair Inc | Backshells & Ac
RoHS : Not Compliant | | 0
|
M85049/10-85N
| Amphenol PCD | Backshells & Ac | 1 : $299.086
5 : $299.086
10 : $263.899
25 : $249.238
50 : $249.238
100 : $240.337
250 : $232.049
500 : $232.049
1,000 : $224.314
2,500 : $224.314
10,000 : $217.078
|
| 0
|
10-494891-085
| Amphenol Aerospace | Connector 38999 | | 0
|
Flip Electronics | NCP81085MTTXG
| onsemi | Stock, Ship Today
RoHS : Compliant | | 4,000
|
SI1085-A-GMR
| Silicon Laboratories Inc | Stock, Ship Today | | 1,568
|
Maritex | LM1085IT-ADJ/NOPB
 | Texas Instruments | LDO Regulators; LM1085IT-ADJ/NOPB; TEXAS INSTRUMENTS; 3; 1; 3 A
RoHS : Compliant | 1,000 : $1.613
500 : $1.831
100 : $2.122
50 : $2.825
10 : $3.771
1 : $5.816
|
| 25,714
|
UZ1085L-33-TN3-R
 | Unisonic Technologies Co Ltd | LDO Regulators; UZ1085L-33-TN3-R; UTC
RoHS : Compliant | 5,000 : $0.112
2,500 : $0.121
500 : $0.155
150 : $0.188
50 : $0.219
5 : $0.291
1 : $0.915
|
| 3,148
|
LM1085ISX-ADJ/NOPB
| Texas Instruments | LDO Regulators; LM1085ISX-ADJ/NOPB; TEXAS INSTRUMENTS; 3; 1; 3 A; 15 V
RoHS : Compliant | 1,000 : $0.78
500 : $0.832
100 : $0.947
30 : $1.111
10 : $1.293
1 : $1.662
|
| 2,408
|
TPS61085PWR
 | Texas Instruments | DC DC Converters; TPS61085PWR; TEXAS INSTRUMENTS; 8; Boost; 1.2 mm; 1
RoHS : Compliant | 1,000 : $0.715
500 : $0.785
100 : $0.882
30 : $0.936
10 : $1.228
1 : $1.412
|
| 1,474
|
ADM1085AKSZ-REEL7
 | Analog Devices Inc | Power Management ICs (PMICs); ADM1085AKSZ-REEL7; ANALOG DEVICES; 6; Surface Mount; SC; 1.1 mm
RoHS : Compliant | 300 : $0.741
100 : $0.856
30 : $1.048
10 : $1.259
1 : $1.709
|
| 1,089
|
TPS61085TPWR
 | Texas Instruments | DC DC Converters; TPS61085TPWR; TEXAS INSTRUMENTS; 8; Boost; 1.2 mm; 1
RoHS : Compliant | 1,000 : $0.749
500 : $0.822
100 : $0.923
30 : $0.981
10 : $1.285
1 : $1.477
|
| 530
|
LM1085R-3.3V
| HTC Korea | Voltage Regulator; linear, LDO; fixed; Vout: 3.3V; Vin: 12V; Vd: 1.5V; 3A; -10+70 deg.C; SMD; TO263(D2PAK) | 800 : $0.333
100 : $0.359
25 : $0.385
10 : $0.401
1 : $0.421
|
| 347
|
TPS61085DGKR
| Texas Instruments | DC DC Converters; TPS61085DGKR; TEXAS INSTRUMENTS; 8; Boost; 0 m; 1
RoHS : Compliant | 1,000 : $0.398
500 : $0.429
100 : $0.518
30 : $0.627
10 : $0.739
1 : $0.983
|
| 212
|
FP11085_LISA2-RS-CLIP
| LEDIL | Lens for LED high power; angle: 9 to 26 degrees FWHM; Number of LEDs: 1; Dimensions: round 10mm; Height: 6.8mm; meterial: PMMA; PC; Fastening: glue; clips | 5,000 : $1.441
1,000 : $1.511
500 : $1.644
100 : $1.873
10 : $2.395
1 : $3.261
|
| 25
|
Neutron USA | 1085
| Adafruit Industries | Data Conversion IC Development Tools ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier - STEMMA QT / Qwiic | | 50
|
1085488
| Phoenix Contact | Mounting Hardware FL Panel Adapter 22.5
RoHS : Compliant | | 50
|
BPSX 1-08-50
| Bias Power Inc | Switching Power Supply 1W 8V, 5V DUAL, 85-265VACin, Extreme Temp | | 50
|
2810850000
| Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories ZQV 4N/20 BL
RoHS : Compliant | | 20
|
1085800
| Phoenix Contact | EV Charger Accessories EV-T1CCS-MF-M4X10 | | 14
|
610851F00000
| Boyd Corporation | Heat Sinks 8FT EXTRUSION 1.31 X 5.38 X 8 | | 12
|
1085260000
| Weidmüller Interface GmbH & Co. KG | Modular Connectors / Ethernet Connectors IE-BSS-V14M-RJ45-FJ-P
RoHS : Compliant | | 10
|
601.0853.002
| Altech Corporation | LIMIT SWITCH, REMOTE RESET,SGS-SA2Z W F3 24V, 24V RESET | | 3
|
1010850030
| Weidmüller Interface GmbH & Co. KG | Sensor Cables / Actuator Cables IE-C5DB4RE0030MCSMCS-E
RoHS : Compliant | | 3
|
116210-85
| AMETEK Inc | Vacuum Motor, Ametek Lamb, 120V, 5.7", 2-stage, tangential, 9A | | 1
|
1085776
| Phoenix Contact | I/O Modules Plug for cold junction compensation for thermocouples in combination with MACX MCR(-EX)-TC... temperature transducers
RoHS : Compliant | | 0
|
B6-30-10-85
| ABB Low Voltage Products and Systems | Mini Contactor, 3P, Control: 380-415VAC, Main: 3NO, Aux: 1NO, Screw Terminals, GJL1211001R8105 | | 0
|
1085177
| Phoenix Contact | Ethernet Modules FL SWITCH 1004N-SFX
RoHS : Compliant | | 0
|
1085170
| Phoenix Contact | Industrial Ethernet Switch, 5 RJ45 ports with 10/100 Mbps on all ports, FL SWITCH 1005NT
RoHS : Compliant | | 0
|
126-1085
| Eaton Corporation | Connector mini hex basic female solder cup termination 5 socket contact | | 0
|
Pasternack Enterprises US | PE3C10858
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Non-Magnetic Cable Using PE-SR405-NM Coax., Pasternack’s PE3C10858 non-magnetic SMA male to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10858 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10858 SMA plug to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10858 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. | | 50
|
PE3C10850-9
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female to SMP Female Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10850-9 non-magnetic SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10850-9 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10850-9 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. | 1 : $215.17
25 : $204.41
50 : $193.65
100 : $185.05
|
| 5
|
PE3C10852
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Right Angle Non-Magnetic Cable Using PE-SR047-NM Coax., Pasternack’s PE3C10852 non-magnetic SMA male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10852 can also be known as a non-magnetic SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10852 SMA plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10852 can also be used in the other direction and will be a right angle SMP jack to SMA plug cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. | | 4
|
PE3C10852-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMP Female Right Angle Non-Magnetic Cable 12 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10852-12 non-magnetic SMA male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10852-12 can also be known as a non-magnetic SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10852-12 SMA plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10852-12 can also be used in the other direction and will be a right angle SMP jack to SMA plug cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. | 1 : $123.41
25 : $117.24
50 : $111.07
100 : $106.13
|
| 4
|
PE3C10855-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 12 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-12 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-12 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-12 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements. | 1 : $425.01
25 : $403.76
50 : $382.51
100 : $365.51
|
| 1
|
PE3C10855-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 24 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-24 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-24 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-24 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-24 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements. | 1 : $436.41
25 : $414.59
50 : $392.77
100 : $375.31
|
| 1
|
PE3C10851-9
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female Right Angle to SMP Female Right Angle Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10851-9 non-magnetic right angle SMP female to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and a right angle SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10851-9 can also be known as a non-magnetic right angle SMP jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10851-9 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a bronze body with copper-tin-zinc alloy over silver plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP right angle jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. | 1 : $57.97
25 : $55.07
50 : $52.17
100 : $49.85
|
| 0
|
PE3C10856-60
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to SMA Male Non-Magnetic Cable 60 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10856-60 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10856-60 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10856-60 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10856-60 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 60-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. | 1 : $250.99
25 : $238.44
50 : $225.89
100 : $215.85
|
| 0
|
PE3W10851LF-72
| Pasternack Enterprises | Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. C Female to N Female Cable 72 Inch Length Using RG393 Coax, LF Solder., Radio frequency assembly C female to N female cable 72 inch length using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to N female cable 72 inch length using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type C cable connection on one end and a type N cable connection on the other. Our type C to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W10851LF-72 can also be known as a type C jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10851LF-72 RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Type C jack to type N jack cable assembly PE3W10851LF-72 is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with type C to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10851LF-72 can also be used in the other direction and will be a type N female to type C female cable assembly if the opposite connectivity is required. Type C jack to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to type N cable assembly for quick shipment worldwide. Variations of type C and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to type N RF cable assembly as per your requirements. | 1 : $309.99
10 : $297.59
25 : $285.19
100 : $272.79
|
| 0
|
PE3C10854-9
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female Right Angle to SMP Female Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10854-9 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854-9 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854-9 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854-9 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. | 1 : $136.57
25 : $129.74
50 : $122.91
100 : $117.45
|
| 0
|
PE3W10851LF
| Pasternack Enterprises | Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. C Female to N Female Cable Using RG393 Coax, LF Solder., Radio frequency assembly C female to N female cable using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to N female cable using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type C cable connection on one end and a type N cable connection on the other. Our type C to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W10851LF can also be known as a type C jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10851LF RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Type C jack to type N jack cable assembly PE3W10851LF is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with type C to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10851LF can also be used in the other direction and will be a type N female to type C female cable assembly if the opposite connectivity is required. Type C jack to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to type N cable assembly for quick shipment worldwide. Variations of type C and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to type N RF cable assembly as per your requirements. | | 0
|
PE3W10855
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male to SMC Jack Cable Using RG316 Coax. PE3W10855 is a BNC male to SMC jack cable using RG316 coax. This Pasternack BNC male to SMC jack cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMC for connector 2. Our male BNC to jack SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10855 BNC male to SMC jack cable assembly is constructed with RG316 coax. | | 0
|
PE3C10854-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female Right Angle to SMP Female Non-Magnetic Cable 12 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10854-12 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854-12 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854-12 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854-12 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. | 1 : $140.41
25 : $133.39
50 : $126.37
100 : $120.75
|
| 0
|
PE3C10852-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMP Female Right Angle Non-Magnetic Cable 18 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10852-18 non-magnetic SMA male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10852-18 can also be known as a non-magnetic SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10852-18 SMA plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10852-18 can also be used in the other direction and will be a right angle SMP jack to SMA plug cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. | 1 : $131.11
25 : $124.55
50 : $118.0
100 : $112.75
|
| 0
|
PE3C10856-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Non-Magnetic Cable 36 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10856-36 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10856-36 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10856-36 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10856-36 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. | 1 : $228.21
25 : $216.8
50 : $205.39
100 : $196.26
|
| 0
|
TE Connectivity | 61085-1
| TE Connectivity | .156 MNL SOK PTPBR Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 20 – 14 AWG Operating Voltage: 600 VAC Tin (Sn) Socket 20 – 14 AWG | Connector Contact | Part Number: 61085-1 | Internal Number: 61085-1 | TE Connectivity
RoHS : Compliant | 1,000 : $0.36
100 : $0.48
10 : $0.59
1 : $0.74
|
| 5,449
|
1-66108-5
| TE Connectivity | III+ SKT,26-24,TIN,STRIP Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 26 – 24 AWG Wire Size: .12 – .2 mm² Tin (Sn) Socket 26 – 24 AWG | Connector Contact | Part Number: 1-66108-5 | Internal Number: 1-66108-5 | TE Connectivity
RoHS : Compliant | 10,000 : $0.98
5,000 : $1.0
2,500 : $1.02
1,000 : $1.05
500 : $1.07
250 : $1.09
100 : $1.11
50 : $1.13
25 : $1.15
10 : $1.18
1 : $1.2
|
| 4,000
|
141085-2
| TE Connectivity | TERMINAL TAB FASTON PIDG 6,35 Quick Disconnect Terminal Type: Tab Insulation Option: Partially Insulated Wire Size: 11 – 10 AWG Wire Size: 4 – 6 mm² Wire Size: 8226 – 12066 CMA Tab Partially Insulated 11 – 10 AWG 4 – 6 mm² | Quick Disconnect | Part Number: 141085-2 | Internal Number: 141085-2 | Alias Number: 475376-000 | TE Connectivity
RoHS : Compliant | 2,500 : $3.32
1,000 : $3.41
500 : $3.5
250 : $3.59
100 : $3.68
50 : $3.77
25 : $3.86
10 : $3.95
1 : $4.04
|
| 3,210
|
2108504-1
| TE Connectivity | 2.5 SDL 18P PLUG HSG 2ROW Number of Positions: 18 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Mating Retention Type: Latching Feature Std Temp Signal Double Lock Plug | 18 Plug Housing With | Part Number: 2108504-1 | Internal Number: 2108504-1 | TE Connectivity
RoHS : Compliant | 1,000 : $0.52
100 : $0.7
10 : $0.87
1 : $1.1
|
| 2,405
|
1-2273108-5
| TE Connectivity | M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 1-2273108-5 | Internal Number: 1-2273108-5 | TE Connectivity
RoHS : Compliant | 25 : $30.05
10 : $32.37
1 : $34.68
|
| 88
|
2273108-5
| TE Connectivity | M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 2273108-5 | Internal Number: 2273108-5 | TE Connectivity
RoHS : Compliant | 100 : $30.25
50 : $31.69
25 : $33.13
10 : $34.56
1 : $36.01
|
| 1
|
Waytek, Inc. | 12110853-L
| Aptiv PLC | Metri-Pack 280 Tangless Female Terminal 12-10 Ga Loose Piece | 100 : $0.2099
200 : $0.1871
500 : $0.1784
1,000 : $0.1651
|
| 7,043
|
Win Source Electronics | TPS61085DGKRG4
 | Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP
RoHS : Compliant | 1,085 : $0.2774
810 : $0.3094
625 : $0.32
455 : $0.3307
295 : $0.3414
125 : $0.416
|
| 163,990
|
TPS61085DGKR
| Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP
RoHS : Compliant | 965 : $0.3124
720 : $0.3485
555 : $0.3605
405 : $0.3725
265 : $0.3845
110 : $0.4686
|
| 100,000
|
TPS61085ATDGKRQ1
 | Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP
RoHS : Compliant | 250 : $1.2015
190 : $1.3402
145 : $1.3864
105 : $1.4326
70 : $1.4788
30 : $1.8023
|
| 50,000
|
CLA4611-085LF
| Skyworks Solutions Inc | 2 X 2 QFN PIN LIMITER DIODE
RoHS : Compliant | 43 : $7.0819
34 : $7.3697
27 : $7.6576
19 : $8.2334
12 : $8.5213
6 : $9.097
|
| 50,000
|
LM1085ISX-ADJ
| Texas Instruments | LM1085 3A Low Dropout Positive Regulators | IC REG LIN POS ADJ 3A DDPAK
RoHS : Not Compliant | 360 : $0.8361
290 : $0.8701
225 : $0.904
155 : $0.972
100 : $1.006
50 : $1.074
|
| 31,500
|
LM1085IS-ADJ/NOPB
| Texas Instruments | IC REG LDO ADJ 3A DDPAK
RoHS : Compliant | 360 : $0.9345
270 : $1.0423
210 : $1.0782
155 : $1.1142
100 : $1.1501
40 : $1.4017
|
| 28,480
|
TPS61085TPWR
| Texas Instruments | IC REG BOOST ADJ 2A 8TSSOP / Boost Switching Regulator IC Positive Adjustable 2.8V 1 Output 2A (Switch) 8-TSSOP (0.173", 4.40mm Width)
RoHS : Compliant | 320 : $0.9424
240 : $1.0511
185 : $1.0873
135 : $1.1236
90 : $1.1598
40 : $1.4135
|
| 22,000
|
TPS61085PW
| Texas Instruments | IC REG BOOST ADJ 2A 8TSSOP
RoHS : Compliant | 610 : $0.4958
455 : $0.553
350 : $0.5721
255 : $0.5911
165 : $0.6102
70 : $0.7437
|
| 13,446
|
LM1085IT-ADJ/NOPB
| Texas Instruments | LM1085 3A Low Dropout Positive Regulators
RoHS : Compliant | 215 : $1.3978
172 : $1.4546
133 : $1.5114
93 : $1.6251
60 : $1.6819
28 : $1.7955
|
| 5,740
|
LM1085RS-ADJ
| HTC Korea | | 1,235 : $0.2436
925 : $0.2717
715 : $0.2811
520 : $0.2904
335 : $0.2998
140 : $0.3654
|
| 5,273
|
52207-1085
| Molex | 1.00mm (.039") Pitch FFC/FPC Connector, SMT, Right Angle, ZIF, Top Contact StyleReceptacle, 10 Circuits, Lead-free, High Barrier Packaging
RoHS : Compliant | 1,005 : $0.2994
750 : $0.3339
580 : $0.3454
425 : $0.3569
275 : $0.3684
115 : $0.449
|
| 3,610
|
LM1085IS-12/NOPB
| Texas Instruments | LM1085 3A Low Dropout Positive Regulators
RoHS : Compliant | 201 : $1.4926
151 : $1.6648
117 : $1.7222
85 : $1.7796
55 : $1.837
23 : $2.2389
|
| 1,230
|
LT1085CM-3.3#TRPBF
| Linear Technology | IC REG LDO 3.3V 3A D2PAK
RoHS : Compliant | 12 : $25.7702
9 : $28.7436
7 : $29.7348
5 : $30.7259
4 : $31.7171
2 : $38.6552
|
| 1,027
|
LT1085CT
| Linear Technology | LT1085 - 1 to 60 MHz, Stratum 3
RoHS : Not Compliant | 17 : $20.5613
14 : $21.397
11 : $22.2329
8 : $23.9045
5 : $24.7404
3 : $26.412
|
| 1,000
|
LT1085CM-3.3
| Linear Technology | 3A, 5A, 7.5A Low Dropout Positive Fixed Regulators
RoHS : Not Compliant | 31 : $10.9915
23 : $12.2597
18 : $12.6825
13 : $13.1052
9 : $13.528
4 : $16.4872
|
| 620
|
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand