10C-R33 Price, 販売店, Stock

PCB terminal block; pitch 5.0mm; 3-ways; vertical; wire range 2.5mm2 (AWG 26-12); rising clamp type; with screws for a cross screwdriver; steel cage; green color; UL 300V/10A, TUV 250V/15A

1,000 : $0.084
500 : $0.102
100 : $0.125
25 : $0.14
1 : $0.227

2,075

HG10-CT

CONNTHERM

Crimp terminal housing; pitch 2.50mm; 10-contacts; female; applicable wire AWG#22-28; 250V/3A

6,000 : $0.014
2,000 : $0.017
1,000 : $0.019
1 : $0.022

1,240

CL10C180JB8NNNC

Samsung Electro-Mechanics

Ceramic capacitor SMD; 0603; 18pF; 50V; NP0; 5%
RoHS : Compliant

4,000 : $0.003
1,000 : $0.004
500 : $0.005
100 : $0.011
10 : $0.022
1 : $0.071

1,205

CL10C390JB8NNNC

Samsung Electro-Mechanics

Ceramic capacitor SMD; 0603; 39pF; 50V; NP0; 5%
RoHS : Compliant

12,000 : $0.013
4,000 : $0.015
1,000 : $0.021
500 : $0.031
1 : $0.041

785

CL10C430JB8NNNC

Samsung Electro-Mechanics

Ceramic capacitor SMD; 0603; 43pF; 50V; NP0; 5%
RoHS : Compliant

12,000 : $0.008
4,000 : $0.009
1,000 : $0.011
500 : $0.012
1 : $0.013

700

CL10C120JB8NNNC

Samsung Electro-Mechanics

Ceramic capacitor SMD; 0603; 12pF; 50V; NP0; 5%
RoHS : Compliant

4,000 : $0.003
1,000 : $0.004
500 : $0.005
100 : $0.011
10 : $0.022
1 : $0.059

650

CL10C270JB8NNNC

Samsung Electro-Mechanics

Ceramic capacitor SMD; 0603; 27pF; 50V; NP0; 5%
RoHS : Compliant

12,000 : $0.012
4,000 : $0.014
1,000 : $0.016
500 : $0.02
1 : $0.026

484

HE10-CT

CONNTHERM

Crimp terminal housing; pitch 1.00mm; 10-contacts; female; applicable wire AWG#28-32; 50V/1A

1,200 : $0.029
600 : $0.032
200 : $0.035
1 : $0.042

201

CL10C470JB8NNNC

Samsung Electronics Co. Ltd

Ceramic capacitor SMD; 0603; 47pF; 50V; NP0; 5%

4,000 : $0.005
1,000 : $0.006
100 : $0.02
10 : $0.038
1 : $0.09

120

C1210C335K5RAC

KEMET Corporation

Ceramic Capacitors; C1210C335K5RAC; KEMET; 3.3 �F; 1210; 50 V; 50 V
RoHS : Compliant

1 : $0.03

Pasternack Enterprises US

PE3C100094-10CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: MHF1, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 3.93 inches. MHF1 to SMA Male Right Angle Cable Assembly Using O.D. 1.37mm Cable, length = 100mm., Pasternack’s PE3C100094-10CM MHF1 to right angle SMA male RF cable assembly is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHF1 to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHF1 to SMA cable assembly orders will ship the same business day as well. Pasternack RF cable assembly is built with an MHF1 cable connection on one end and a right angle SMA cable connection on the other. PE3C100094-10CM can also be known as an MHF1 to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.054-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The MHF1 to SMA cable from Pasternack is ideal for applications including external antenna connection (Wi-Fi, Bluetooth, LTE, 5G, and GPS receivers), improving signal strength (embedded systems inside metal enclosures), prototyping and development and IoT and embedded systems (drones and robotics). The minimum bend radius for this cable is 0.314 inches, allowing for a single bend without damaging the cable. Our PE3C100094-10CM RF cable has an FEP jacket of 0.054-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. This cable assembly has a typical propagation velocity of 70%. Our MHF1 to right angle SMA male cable has a maximum VSWR of 1.55:1. This single shielded cable assembly has a tinned copper shield layer. The Pasternack MHF1 cable assembly is manufactured with MHF1 to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Additional dimensions, specifications, and CAD drawings for this 3.93-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100094-10CM can also be used in the other direction and will be a right angle SMA plug to MHF1 cable assembly if the opposite connectivity is required. This MHF1 to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHF1 to SMA cable assembly for quick shipment worldwide. Variations of MHF1 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHF1 to SMA RF cable assembly as per your requirements.

1 : $13.99
25 : $13.43
50 : $13.01
100 : $12.73

PE3C100093-10CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: MHF1, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 3.93 inches. MHF1 to SMA Male Cable Assembly Using O.D. 1.37mm Cable, length = 100mm., Pasternack’s PE3C100093-10CM MHF1 to SMA male RF cable assembly is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHF1 to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHF1 to SMA cable assembly orders will ship the same business day as well. Pasternack RF cable assembly is built with an MHF1 cable connection on one end and an SMA cable connection on the other. PE3C100093-10CM can also be known as an MHF1 to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.054-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The MHF1 to SMA cable from Pasternack is ideal for applications including external antenna connection (Wi-Fi, Bluetooth, LTE, 5G, and GPS receivers), improving signal strength (embedded systems inside metal enclosures), prototyping and development and IoT and embedded systems (drones and robotics). The minimum bend radius for this cable is 0.314 inches, allowing for a single bend without damaging the cable. Our PE3C100093-10CM RF cable has an FEP jacket of 0.054-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. This cable assembly has a typical propagation velocity of 70%. Our MHF1 to SMA male cable has a maximum VSWR of 1.5:1. This single shielded cable assembly has a tinned copper shield layer. The Pasternack MHF1 cable assembly is manufactured with MHF1 to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Additional dimensions, specifications, and CAD drawings for this 3.93-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100093-10CM can also be used in the other direction and will be an SMA plug to MHF1 cable assembly if the opposite connectivity is required. This MHF1 to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHF1 to SMA cable assembly for quick shipment worldwide. Variations of MHF1 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHF1 to SMA RF cable assembly as per your requirements.

1 : $12.99
25 : $12.47
50 : $12.08
100 : $11.82

PE3C100095-10CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: MHF1, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 3.93 inches. MHF1 to SMA Female Bulkhead (with O-ring) Cable Assembly Using O.D. 1.37mm Cable, length = 100mm., Pasternack’s PE3C100095-10CM MHF1 to SMA female bulkhead RF cable assembly is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHF1 to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHF1 to SMA cable assembly orders will ship the same business day as well. Pasternack RF cable assembly is built with an MHF1 cable connection on one end and an SMA bulkhead cable connection on the other. PE3C100095-10CM can also be known as an MHF1 to SMA jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.054-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The MHF1 to SMA cable from Pasternack is ideal for applications including external antenna connection (Wi-Fi, Bluetooth, LTE, 5G, and GPS receivers), improving signal strength (embedded systems inside metal enclosures), prototyping and development and IoT and embedded systems (drones and robotics). The minimum bend radius for this cable is 0.314 inches, allowing for a single bend without damaging the cable. Our PE3C100095-10CM RF cable has an FEP jacket of 0.054-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. This cable assembly has a typical propagation velocity of 70%. Our MHF1 to bulkhead SMA female cable has a maximum VSWR of 1.5:1. This single shielded cable assembly has a tinned copper shield layer. The Pasternack MHF1 cable assembly is manufactured with MHF1 to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Additional dimensions, specifications, and CAD drawings for this 3.93-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100095-10CM can also be used in the other direction and will be an SMA jack bulkhead to MHF1 cable assembly if the opposite connectivity is required. This MHF1 to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHF1 to SMA cable assembly for quick shipment worldwide. Variations of MHF1 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHF1 to SMA RF cable assembly as per your requirements.

1 : $12.99
25 : $12.47
50 : $12.08
100 : $11.82

PE3C100092-10CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: MHF1, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 3.93 inches. MHF1 to SMA Female Bulkhead (with O-ring) Cable Assembly Using O.D. 0.81mm Cable, length = 100mm., Pasternack’s PE3C100092-10CM MHF1 to SMA female bulkhead RF cable assembly is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHF1 to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHF1 to SMA cable assembly orders will ship the same business day as well. Pasternack RF cable assembly is built with an MHF1 cable connection on one end and an SMA bulkhead cable connection on the other. PE3C100092-10CM can also be known as an MHF1 to SMA jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.032-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The MHF1 to SMA cable from Pasternack is ideal for applications including external antenna connection (Wi-Fi, Bluetooth, LTE, 5G, and GPS receivers), improving signal strength (embedded systems inside metal enclosures), prototyping and development and IoT and embedded systems (drones and robotics). The minimum bend radius for this cable is 0.196 inches, allowing for a single bend without damaging the cable. Our PE3C100092-10CM RF cable has an FEP jacket of 0.032-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 90 degrees C. This cable assembly has a typical propagation velocity of 69%. Our MHF1 to bulkhead SMA female cable has a maximum VSWR of 1.5:1. This single shielded cable assembly has a tinned copper shield layer. The Pasternack MHF1 cable assembly is manufactured with MHF1 to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Additional dimensions, specifications, and CAD drawings for this 3.93-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100092-10CM can also be used in the other direction and will be an SMA jack bulkhead to MHF1 cable assembly if the opposite connectivity is required. This MHF1 to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHF1 to SMA cable assembly for quick shipment worldwide. Variations of MHF1 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHF1 to SMA RF cable assembly as per your requirements.

1 : $12.99
25 : $12.47
50 : $12.08
100 : $11.82

PE-W10CR002

Pasternack Enterprises

Key Specifications. Minimum Frequency: 92 GHz Maximum Frequency: 94 GHz Waveguide size: WR-10 VSWR(Max): 1.5:1 Insertion Loss: 1 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 0.5 Watts Input Power (Peak): 20 Watts. WR-10 Waveguide Circulator, 92 GHz to 94 GHz, 15 dB min Isolation, UG-387/U-M Cover Flange, Brass. The PE-W10CR002 is a Waveguide Circulator offering 15 dB minimum isolation over the W band frequency range of 92 to 94 GHz. The design achieves high isolation with wide band performance and the WR-10 waveguide uses UG-387/U-M compatible flanges on all ports and has a power rating of 0.5 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability.

1 : $3,930.0
5 : $3,772.8
10 : $3,615.6
25 : $3,458.4

PE-W10CP011-30

Pasternack Enterprises

Key Specifications, Waveguide Size : WR-10, Flange Size: UG-387/U-M Flange, Flange Type : Round Cover Flange, Flange Group : Standard, Minimum Frequency: 90 GHz, Maximum Frequency: 110 GHz, Maximum VSWR: 1.25:1, Maximum Insertion Loss: 0.8 dB, Coupling: 30 dB. WR-10 Waveguide 30 dB Broadwall Coupler, UG-387/U-Mod Round Cover Flange, H-Plane Coupled Port, 90 GHz to 110 GHz, Brass Copper., Pasternack’s PE-W10CP011-30 is a WR-10 directional broadwall waveguide coupler. Our waveguide coupler operates over a frequency range between 90 GHz and 110 GHz. This waveguide broadwall coupler is designed with an H-plane coupled port and has a coupling accuracy of 30 dB. This 30 dB waveguide coupler has a brass copper body with gold plating. Our WR-10 directional waveguide coupler is rated for a maximum input power (CW) of 10 Watts. This 110 GHz waveguide coupler has a 1.15:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this 3-port WR-10 waveguide coupler are on our downloadable PDF datasheet above. The PE-W10CP011-30 broadwall waveguide coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our waveguide coupler has a maximum insertion loss of 0.8 dB. This waveguide coupler has a UG-387/U-M round cover flange, which is made up of brass copper material with a gold plating. The waveguide coupler with a UG-387/U-M round cover flange has a minimum coupler directivity of 25 dB. This WR-10 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same-business-day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal 3-port directional broadwall waveguide coupler for your requirement.

1 : $3,710.0
5 : $3,635.8
10 : $3,561.6
25 : $3,487.4

PE-W10CR001

Pasternack Enterprises

Key Specifications. Minimum Frequency: 82.2 GHz Maximum Frequency: 84.2 GHz Waveguide size: WR-10 VSWR(Max): 1.5:1 Insertion Loss: 1 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 0.5 Watts Input Power (Peak): 20 Watts. WR-10 Waveguide Circulator, 82.2 GHz to 84.2 GHz, 15 dB min Isolation, UG-387/U-M Cover Flange, Brass. The PE-W10CR001 is a Waveguide Circulator offering 15 dB minimum isolation over the W band frequency range of 82.2 to 84.2 GHz. The design achieves high isolation with wide band performance and the WR-10 waveguide uses UG-387/U-M compatible flanges on all ports and has a power rating of 0.5 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability.

1 : $3,930.0
5 : $3,772.8
10 : $3,615.6
25 : $3,458.4

PE-W10CP011-20

Pasternack Enterprises

Key Specifications, Waveguide Size : WR-10, Flange Size: UG-387/U-M Flange, Flange Type : Round Cover Flange, Flange Group : Standard, Minimum Frequency: 90 GHz, Maximum Frequency: 110 GHz, Maximum VSWR: 1.25:1, Maximum Insertion Loss: 0.8 dB, Coupling: 20 dB. WR-10 Waveguide 20 dB Broadwall Coupler, UG-387/U-Mod Round Cover Flange, H-Plane Coupled Port, 90 GHz to 110 GHz, Brass Copper., Pasternack’s PE-W10CP011-20 is a WR-10 directional broadwall waveguide coupler. Our waveguide coupler operates over a frequency range between 90 GHz and 110 GHz. This waveguide broadwall coupler is designed with an H-plane coupled port and has a coupling accuracy of 20 dB. This 20 dB waveguide coupler has a brass copper body with gold plating. Our WR-10 directional waveguide coupler is rated for a maximum input power (CW) of 10 Watts. This 110 GHz waveguide coupler has a 1.15:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this 3-port WR-10 waveguide coupler are on our downloadable PDF datasheet above. The PE-W10CP011-20 broadwall waveguide coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our waveguide coupler has a maximum insertion loss of 0.8 dB. This waveguide coupler has a UG-387/U-M round cover flange, which is made up of brass copper material with a gold plating. The waveguide coupler with a UG-387/U-M round cover flange has a minimum coupler directivity of 25 dB. This WR-10 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same-business-day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal 3-port directional broadwall waveguide coupler for your requirement.

1 : $3,710.0
5 : $3,635.8
10 : $3,561.6
25 : $3,487.4

PE9862B-10-CPRG

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-229, Frequency, Min: 3.3 GHz, Frequency, Max: 4.9 GHz. WR-229 Waveguide Standard Gain Horn Antenna Operating From 3.3 GHz to 4.9 GHz With a Nominal 10 dB Gain With CPRG Flange. Pasternack’s PE9862B-10-CPRG WR-229 waveguide horn is also known as a waveguide horn antenna. This WR-229 standard gain horn waveguide antenna has a nominal gain of 10 dBi. Our waveguide horn can operate at frequencies ranging from 3.3 to 4.9 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 10 dBi waveguide horn from Pasternack has an overall length of 3.63 inches, a width of 2.68 inches, and a weight of 0.34 lbs. Our antenna comes with a cprg flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-229 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-229 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,920.0
5 : $1,881.6
10 : $1,843.2
25 : $1,804.8

PE3CA1040-110CM

Pasternack Enterprises

1 : $171.99
25 : $163.39
50 : $154.79
100 : $147.91

PE3W07670-10CM

Pasternack Enterprises

PE3512-210CM

Pasternack Enterprises

1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71

PE3704-110CM

Pasternack Enterprises

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE3W16361-10CM

Pasternack Enterprises

1 : $149.99
25 : $142.49
50 : $134.99
100 : $128.99

PE3514-10CM

Pasternack Enterprises

1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7

Venkel Ltd.

C1210C0G102-102KNE

VENKEL LTD

HV Chip Capacitor;1210;C0G;1000V;1000pF;�10%
RoHS : Compliant

C1210C0G102-220JNE

VENKEL LTD

HV Chip Capacitor;1210;C0G;1000V;22pF;�5%
RoHS : Compliant

C1210C0G500-152JNE

VENKEL LTD

Chip Capacitor;1210;C0G;50V;1500pF;�5%
RoHS : Compliant

C1210C0G500-822FNE

VENKEL LTD

Chip Capacitor;1210;C0G;50V;8200pF;�1%
RoHS : Compliant

C1210C0G501-100JNE

VENKEL LTD

HV Chip Capacitor;1210;C0G;500V;10pF;�5%
RoHS : Compliant

C1210C0G501-182JNE

VENKEL LTD

HV Chip Capacitor;1210;C0G;500V;1800pF;�5%
RoHS : Compliant

C1210C0G501-470JNE

VENKEL LTD

HV Chip Capacitor;1210;C0G;500V;47pF;�5%
RoHS : Compliant

C1210C0G601-150JNE

VENKEL LTD

HV Chip Capacitor;1210;C0G;600V;15pF;�5%
RoHS : Compliant

C1210C0G631-270JNE

VENKEL LTD

HV Chip Capacitor;1210;C0G;630V;27pF;�5%
RoHS : Compliant

MELFC0102-RE-1910CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�25PPM;191R;�0.25%
RoHS : Compliant

MELFC0102-YZ-9310CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�15PPM;931R;�0.25%
RoHS : Compliant

MELFC0204-TP-2210CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�5PPM;221R;�0.25%
RoHS : Compliant

MELFC0204-TZ-2610CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�15PPM;261R;�0.25%
RoHS : Compliant

MELFM0204-TE-1210CT

VENKEL LTD

MELF Molded Thin Film CR;0204;1/4W;�25PPM;121R;�0.25%
RoHS : Not Compliant

MELFM0207-VC-2610CT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�50PPM;261R;�0.25%
RoHS : Not Compliant

Vyrian

CL10C120JC8NNNC

Samsung Electro-Mechanics

Ceramic Capacitor, Multilayer, Ceramic, 100V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.000012uF, Surface Mount, 0603
RoHS : Compliant

17,983

C1210C105M5N2CAUTO

KEMET Corporation

Ceramic Capacitor, Multilayer, Ceramic, 50V, 20% +Tol, 20% -Tol, X8L, -/+15% TC, 1uF, Surface Mount, 1210

17,290

CL10C020BB8NNNC

Samsung Electro-Mechanics

Ceramic Capacitor, Multilayer, Ceramic, 50V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.000002uF, Surface Mount, 0603
RoHS : Compliant

13,142

C1210C106M6PAC7210

KEMET Corporation

Ceramic Capacitor, Multilayer, Ceramic, 35V, 20% +Tol, 20% -Tol, X5R, 15% TC, 10uF, Surface Mount, 1210

11,742

V320LT10CP

Littelfuse Inc

Varistor, 80J, Through Hole Mount
RoHS : Compliant

11,472

C1210C331JCGAC7800

KEMET Corporation

Ceramic Capacitor, Multilayer, Ceramic, 500V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.00033uF, 1210

9,187

MTC10C1084S1EC56BAZ

Micron Technology Inc

5,769

32R1574R-10CGT

Texas Instruments

3,955

MT52C9010C30

Micron Technology Inc

RoHS : Not Compliant

3,686

10CX105YF780I6G

Intel Corporation

Field Programmable Gate Array, 104000-Cell, PBGA780
RoHS : Compliant

3,570

XCR3032XL-10CSG48I

AMD Xilinx

EE PLD, 10ns, 32-Cell, CMOS, PBGA48
RoHS : Compliant

3,316

10CL016YE144C8G

Intel Corporation

Field Programmable Gate Array, 963 CLBs, PQFP144
RoHS : Compliant

2,897

10CL016ZU484I8G

Intel Corporation

Field Programmable Gate Array, 963 CLBs, 15408-Cell, PBGA484
RoHS : Compliant

2,331

10CX085YF672I5G

Intel Corporation

Field Programmable Gate Array, 85000-Cell, PBGA672
RoHS : Compliant

1,262

C1210C123JDGAC7800

KEMET Corporation

Ceramic Capacitor, Multilayer, Ceramic, 1000V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.012uF, Surface Mount, 1210

365

Waytek, Inc.

MB3A10C2

HellermannTyton

HellermannTyton MB3A10C2 cable tie mounting base is an adhesive-backed mount designed to anchor cable ties to panels and flat surfaces. Its compact base format supports organized wire routing, secure bundle retention, and clean harness management in vehicle and equipment applications.
RoHS : Compliant

50 : $0.3392
200 : $0.3217
500 : $0.2993
1,000 : $0.2865

29,070

MB4A10C2

HellermannTyton

HellermannTyton MB4A10C2 cable tie mounting base is an adhesive-backed mount designed to anchor cable ties to panels and flat surfaces. Its compact base format supports organized wire routing, secure bundle retention, and clean harness management in vehicle and equipment applications.

25 : $0.7203
50 : $0.6459
100 : $0.5855
200 : $0.5774
500 : $0.5694
1,000 : $0.5231

13,402

CTAM10C2

HellermannTyton

HellermannTyton CTAM10C2 cable tie anchor mount is a mounting base designed to secure cable ties to panels and flat surfaces. Its anchor-mount format supports organized wire routing, stable bundle retention, and cleaner harness management in vehicle and equipment applications.

100 : $0.1669
200 : $0.1541
500 : $0.14
1,000 : $0.1298
5,000 : $0.1234

9,000

MB5A10C2

HellermannTyton

HellermannTyton MB5A10C2 cable tie mounting base is an adhesive-backed mount designed to anchor cable ties to panels and flat surfaces. Its compact base format supports organized wire routing, secure bundle retention, and clean harness management in vehicle and equipment applications.
RoHS : Compliant

20 : $0.8923
50 : $0.7985
100 : $0.7241
200 : $0.6983
500 : $0.6756
1,000 : $0.6498

5,005

AL-SM1-0-C (#6 BOLT)

Advanced Cable Ties Inc

ACT AL-SM1-0-C UV-resistant screw mount is a black nylon cable-tie mount sized for #6 screws and built for outdoor or exposed environments. Its UV-resistant construction and screw-mount format support secure bundle attachment, organized routing, and durable harness support.

100 : $0.1453
200 : $0.1346
500 : $0.1221
1,000 : $0.1129
5,000 : $0.1076

900

ACBP-V-10C 10A

OptiFuse

Type 1 Circuit Breaker In-Line Mounting 10A, 32VDC GRAY

1 : $3.3596
50 : $2.8032
100 : $2.4325
200 : $2.2906
500 : $2.2033

600

KS5-10-CLN

NSPA

Krimpa-Seal Butt - 12-10 AWG Nylon Butt w/HST

10 : $0.8113
50 : $0.7224
100 : $0.6557
200 : $0.6334
500 : $0.6141
1,000 : $0.589

400