| データシートサーチシステム |
|
12313-R2 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() Ameya Holding Limited | NCP81231MNTXG | onsemi | Buck Controller,USB Power & Type-C Apply RoHS : Compliant | 5,100 | ||
TM4C1231H6PGEI7R![]() | Texas Instruments | IC MCU 32BIT 256KB FLASH 144LQFP RoHS : Compliant | 347 | |||
![]() NexGen Digital | SX1231IMLTRT![]() | Semtech Corporation | RoHS : Compliant | 229 | ||
| 45971-2315 | Molex | RoHS : Compliant | 20 | |||
![]() PUI | TSW-123-14-L-D | Samtec Inc | RoHS : Compliant |
| 250 | |
![]() Avnet Abacus | 460123141 | Molex | (Alt: 460123141) RoHS : Compliant | 192,000 | ||
| 460123141 | Molex | (Alt: 460123141) RoHS : Compliant | 24,000 | |||
| 5601231000 | Molex | (Alt: 5601231000) RoHS : Compliant | 8,000 | |||
| 734123150 | Molex | RF Coaxial Connector MCRF Coaxial Straight Jack Surface Mount Straight 50 Ohm Brass (Alt: 734123150) RoHS : Compliant | 5,000 | |||
| 0460-220-1231 | TE Connectivity | Contact PIN Crimp ST Cable Mount (Alt: 0460-220-1231) RoHS : Compliant | 4,120 | |||
| GSB311231HR | Amphenol Corporation | Conn USB Type A F 18 POS Solder RA ThruHole 18 Terminal 2 Port (Alt: GSB311231HR) RoHS : Compliant | 4,100 | |||
| 1011-231-0305 | TE Connectivity | Connector Accessory Backshell AMP DT Series DT063S Automotive Connector DT (Alt: 1011-231-0305) RoHS : Compliant | 2,000 | |||
| 1318123-1 | TE Connectivity | Pin Header WiretoBoard 25 mm 1 Rows 3 Contacts Through Hole Straight Dynamic 2000 Series (Alt: 1318123-1) RoHS : Compliant | 1,656 | |||
| CH-12.3/13.5 | Amphenol Corporation | Crimp Ferrule (Alt: CH-12.3/13.5) RoHS : Compliant | 487 | |||
| 460123142 | Molex | Contact PIN Crimp ST Cable Mount Bag (Alt: 460123142) RoHS : Compliant | 348 | |||
| B41231A7229M 60 | TDK Corporation | Snapin 22000uF 35V (Alt: B41231A7229M060) RoHS : Not Compliant | 120 | |||
| 734123150 | Molex | RF Coaxial Connector MCRF Coaxial Straight Jack Surface Mount Straight 50 Ohm Brass (Alt: 734123150) RoHS : Compliant | 0 | |||
| 133-3701-231 | Bel Fuse | (Alt: 133-3701-231) RoHS : Not Compliant | 0 | |||
| TS12315A0000G | Amphenol Corporation | (Alt: TS12315A0000G) RoHS : Compliant | 0 | |||
| B41231A7109M 60 | TDK Corporation | Snapin 10000uF 35V (Alt: B41231A7109M060) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | G42V12312HR | Amphenol Corporation | Card Edge Connector, Dual Side, 1.57 mm, 74 Contacts, Surface Mount, Straight, Solder (Alt: G42V12312HR) RoHS : Compliant |
| 2,400 | |
| GRPCB021231CEU | Amphenol Corporation | (Alt: GRPCB021231CEU) RoHS : Compliant | 400 | |||
| OQ0612310000G | Amphenol Corporation | PLUGGABLE TERMINAL BLOCKS OQ-3.5-6P (Alt: OQ0612310000G) RoHS : Compliant | 0 | |||
| NCP81231MNTXG | onsemi | (Alt: NCP81231MNTXG) RoHS : Compliant | 0 | |||
| 10167520-121231CLF | Amphenol Corporation | FCI10167520-121231CLF MINITEK POWER 3.0 (Alt: 10167520-121231CLF) RoHS : Compliant | 0 | |||
| GH10R12312HR | Amphenol Corporation | MINI COOL EDGE IO 85OHM R/A 74PIN, PCIE GEN6 (Alt: GH10R12312HR) RoHS : Compliant | 0 | |||
| G17DD1501231SHR | Amphenol Corporation | D-SUB 15PIN FEMALE R/A SINK, DIP (Alt: G17DD1501231SHR) RoHS : Compliant | 0 | |||
| 1-2314822-2 | TE Connectivity | Connector Socket Strip 12-Position 2-Row 2mm Solder Straight Through Hole Tube (Alt: 1-2314822-2) RoHS : Compliant | 0 | |||
| 10171123-14340T1LF | Amphenol Corporation | COM HPC SOCKET PLUG 3.40-10171123-14340T1LF (Alt: 10171123-14340T1LF) RoHS : Compliant | 0 | |||
| 10167519-121231TLF | Amphenol Corporation | (Alt: 10167519-121231TLF) RoHS : Compliant | 0 | |||
| G9912312HR | Amphenol Corporation | S H-CONN AMPHENOL G9912312HR 74P P0.6 (Alt: G9912312HR) RoHS : Compliant | 0 | |||
| G802M0123120RD1HR | Amphenol Corporation | AHLG802M0123120RD1HR CONN,HEADER,2X6,V/T (Alt: G802M0123120RD1HR) RoHS : Compliant | 0 | |||
| 5123.1007.0 | Schurter Electronic Components | Power Entry Module with Line Filter 15A Quick Connect Panel Mount (Alt: 5123.1007.0) RoHS : Compliant | 0 | |||
| 10167519-121231CLF | Amphenol Corporation | FCI10167519-121231CLF TK,OCP,BTB,R/A,HEA (Alt: 10167519-121231CLF) RoHS : Compliant | 0 | |||
| HA-1231-24LM_TOOLING | Lite-On Semiconductor Corporation | (Alt: HA-1231-24LM_TOOLING) RoHS : Compliant | 0 | |||
![]() DB Roberts | BSC1032X1/2-316SS | BUTTON HEAD SOCKET | Button Head Socket Cap Screw |
| 4,944 | |
| FSC832X1/2-316SS | FLAT HEAD SOCKET CA | Flat Head Socket Cap Screw |
| 1,800 | ||
| BSCM5X12-316SS | BUTTON HEAD SOCKET | Button Head Socket Cap Screw |
| 775 | ||
| HXNM12-316SS | HEX NUT | Hex Nut |
| 93 | ||
| SHC1/4-28X1/2-316SS | SOCKET HEAD CAP SCR | Socket Head Cap Screw |
| 17 | ||
| E3-123-1559 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-123-181 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| D3-316-123-190 | Southco | D3-316-123-190 | 0 | |||
| E3-123-175 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-123-1759 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-123-135 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-123-180 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-123-185 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-123-1106 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 97-50-123-12-2 | Southco | 0 | ||||
![]() EBV Elektronik | NSVS1231B | Nisshinbo Micro Devices | 868 MHz SAW Filter (Alt: NSVS1231B) RoHS : Compliant | 0 | ||
| NCP81231MNTXG | onsemi | Buck Controller USB Power Delivery and TypeC Applications (Alt: NCP81231MNTXG) RoHS : Compliant | 0 | |||
| CA12318_LAURA-RS-PIN | LEDIL | ASSEMBLY SQUARE 1 POS 216MM D 131MM (Alt: CA12318_LAURA-RS-PIN) RoHS : Compliant | 0 | |||
| CA12311_STRADA-SQ-T-DN | LEDIL | Assemblysquare1 Posmm DmmH (Alt: CA12311_STRADA-SQ-T-DN) RoHS : Compliant | 0 | |||
![]() Flip Electronics | CPC1231NTR | Littelfuse Inc | Stock RoHS : Compliant | 4,000 | ||
| MC12311CHN | NXP Semiconductors | Stock RoHS : Compliant | 2,600 | |||
![]() Neutron USA | 1712311001 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories KLBU 4 - 13.5 SC RoHS : Compliant |
| 50 | |
| 10-A312.314A | EAO AG | Industrial Panel Mount Indicators / Switch Indicators LENS SQ CCVE TPT RED RoHS : Compliant |
| 42 | ||
| 601.1231.909 | Altech Corporation | Switch Safety Interlock N.O./N.C. SPST/SPST Eyelet Pull 3A 240VAC Screw Mount Screw 1000000Cycles |
| 24 | ||
| 1212314 | Phoenix Contact | Wire Stripping & Cutting Tools WIREFOX 6SC/SB |
| 14 | ||
| 09120123102 | HARTING Technology Group | Heavy Duty Power Connectors Han Q12-F for PCB-Adapter RoHS : Compliant |
| 13 | ||
| 56.OA01.1231C | Altech Corporation | Relay; E-Mech; Sfty; 3 NO; 1 NC; Cur-Rtg 10A; Ctrl-V 12DC; Vol-Rtg 400/250AC/DC; 10 Pin |
| 12 | ||
| 7000-08061-2310500 | Murrelektronik GmbH | M8 female with cable, PUR 4x0.25 gy UL/CSA+drag chain 5m RoHS : Compliant |
| 11 | ||
| B3-12312 | OTTO Engineering Inc | Basic / Snap Action Switches 8A SPNO-DB Turret 1/8 Low Current MIL RoHS : Compliant |
| 10 | ||
| DC12.3102.203 | Schurter Electronic Components | AC Power Entry Modules DC12 PWR ENTRY MODUL 4A RoHS : Compliant |
| 6 | ||
| P3-61231 | OTTO Engineering Inc | Pushbutton Switches Style 6 Sldr Std. N.C. PushPull Red RoHS : Compliant |
| 5 | ||
| Q212316-0151B-24VDC | Norgren | Valve, KIP, plastic, buna seal, 24VDC, 1/4" OD tube, 5/32" |
| 3 | ||
| 0712314 | Phoenix Contact | Circuit Breakers TCP 10 AMPS RoHS : Compliant |
| 0 | ||
| D51.23184S.001 | Apacer Technology Inc | Apacer REG DDR4-2666 DIMM 4GB CL19 WT |
| 0 | ||
| CDM1231-03A-01FRA-1M-67 | CUI Inc | Sensor Cable, RA M12 F 3pos to cut end, 3wire 22AWG 1m, PVC Black |
| 0 | ||
| CDM1231-03A-01FRA-1M-67 | Same Sky | Sensor Cables / Actuator Cables Sensor Cables / Actuator Cables M12 Female Molded Cable, Angled, UnShielded RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W16123-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SSMB Plug to BNC Female Cable 12 Inch Length Using RG188 Coax., Radio frequency assembly SSMB plug to BNC female cable 12 inch length using RG188 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMB plug to BNC female cable 12 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMB to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SSMB cable connection on one end and a BNC cable connection on the other. Our SSMB to BNC cable assembly has a plug gender on end 1 and a female on end 2. PE3W16123-12 can also be known as a SSMB male to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W16123-12 RF cable has a PTFE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our SSMB plug to BNC female cable has a maximum VSWR of 1.4:1. SSMB male to BNC jack cable assembly PE3W16123-12 is built with RG188 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with SSMB to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16123-12 can also be used in the other direction and will be a BNC female to SSMB plug cable assembly if the opposite connectivity is required. SSMB male to BNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMB to BNC cable assembly for quick shipment worldwide. Variations of SSMB and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMB to BNC RF cable assembly as per your requirements. |
| 555 | |
| PE410-06031-231 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: TRB, Connector Gender: Plug, Impedance: 78 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 500 MHz, Interface Type 1: 30-02003, Interface Type 2: TWC-78-1. 78 Ohm TRB Plug 1553 Connector Crimp/Solder Attachment for 30-02003, TWC-78-1,. PE410-06031-231 TRB plug coaxial connector has an interface type of TRB plug 30-02003, TWC-78-1 and a 78 Ohm impedance.Pasternack TRB plug connector uses shield/contact crimp/solder as an attachment method. Our plug TRB coaxial connector provides a minimum frequency of DC and a maximum frequency of 500 MHz. The Pasternack TRB coaxial connector has a brass body with nickel plating. This TRB plug coaxial RF connector is REACH compliant. Our high quality PE410-06031-231 features a ASTM-B-733 body plating specification. We also build TRB custom connector cable assemblies that will ship the same day as well. Our TRB plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you to the perfect RF connector as per your requirement. |
| 476 | ||
| PE3W12315LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Outdoor Rated N Male Right Angle to N Male Low PIM Cable 36 Inch Length Using SPO-250 Coax, LF Solder., Radio frequency assembly outdoor rated N male right angle to N male low PIM cable 36 inch length using SPO-250 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The outdoor rated N male right angle to N male low PIM cable 36 inch length using SPO-250 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low PIM right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12315LF-36 can also be known as a low PIM right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W12315LF-36 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W12315LF-36 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W12315LF-36 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low PIM type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 233 | ||
| PE3W12315LF-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. Outdoor Rated N Male Right Angle to N Male Low PIM Cable 50 CM Length Using SPO-250 Coax, LF Solder., Radio frequency assembly outdoor rated N male right angle to N male low PIM cable 50 cm length using SPO-250 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The outdoor rated N male right angle to N male low PIM cable 50 cm length using SPO-250 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low PIM right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12315LF-50CM can also be known as a low PIM right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W12315LF-50CM RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W12315LF-50CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W12315LF-50CM can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low PIM type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 233 | ||
| PE3W12315LF-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Outdoor Rated N Male Right Angle to N Male Low PIM Cable 60 Inch Length Using SPO-250 Coax, LF Solder., Radio frequency assembly outdoor rated N male right angle to N male low PIM cable 60 inch length using SPO-250 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The outdoor rated N male right angle to N male low PIM cable 60 inch length using SPO-250 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low PIM right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12315LF-60 can also be known as a low PIM right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W12315LF-60 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W12315LF-60 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W12315LF-60 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low PIM type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 233 | ||
| PE3W12315LF-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Outdoor Rated N Male Right Angle to N Male Low PIM Cable 24 Inch Length Using SPO-250 Coax, LF Solder., Radio frequency assembly outdoor rated N male right angle to N male low PIM cable 24 inch length using SPO-250 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The outdoor rated N male right angle to N male low PIM cable 24 inch length using SPO-250 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low PIM right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12315LF-24 can also be known as a low PIM right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W12315LF-24 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W12315LF-24 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W12315LF-24 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low PIM type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 233 | ||
| PE3C1231LF | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm F Female Bulkhead to 75 Ohm BNC Male Right. PE3C1231LF is a F female bulkhead to BNC male right angle cable using RG59 coax. This Pasternack F female bulkhead to BNC male right angle cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm BNC for connector 2. F to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female F bulkhead to male BNC right angle cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3C1231LF F female bulkhead to BNC male right angle cable assembly is constructed with RG59 coax. | 0 | |||
| PE3C11231 | Pasternack Enterprises | 0 | ||||
| PE3C1231 | Pasternack Enterprises | 0 | ||||
| PE3W01231 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. N Male to Mini SMP Female Cable Using PE-SR405FL Coax. PE3W01231 is a N male to Mini SMP female cable using PE-SR405FL coax. This Pasternack N male to Mini SMP female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm Mini SMP for connector 2. Our male N to female Mini SMP cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W01231 N male to Mini SMP female cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE3FCA123-1M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC APC to SC APC, SM OS2, 2.0mm LSZH, Yellow-1M. Pasternack’s PE3FCA123-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long patch cable assembly is equipped with simplex SC/APC to SC/APC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA123-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/APC to SC/APC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W21231 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to MMCX Plug Right Angle Cable Using PE-P086HF Coax. PE3W21231 is a SMA female bulkhead to MMCX plug right angle cable using PE-P086HF coax. This Pasternack SMA female bulkhead to MMCX plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. SMA to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA bulkhead to plug MMCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21231 SMA female bulkhead to MMCX plug right angle cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3W11231 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3FCA123-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC APC to SC APC, SM OS2, 2.0mm LSZH, Yellow-10M. Pasternack’s PE3FCA123-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with simplex SC/APC to SC/APC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA123-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/APC to SC/APC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3C11231LF | Pasternack Enterprises | 0 | ||||
![]() Venkel Ltd. | TFCR0805-10W-C-1231DT | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;1.23K;�0.5% RoHS : Compliant | 0 | ||
| TFCR1206-8W-K-1231CT | VENKEL LTD | Thin Film CR;1206;1/8W;�100PPM;1.23K;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-K-1231FT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�100PPM;1.23K;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-1231CT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;1.23K;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-N-1231CT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;1.23K;�0.25% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-1231DT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;1.23K;�0.5% RoHS : Compliant | 0 | |||
| UPTF2512-2W-N-1231UT | VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�10PPM;1.23K;�0.01% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-1231BT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;1.23K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-K-1231FT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�100PPM;1.23K;�1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-1231BT | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;1.23K;�0.1% RoHS : Compliant | 0 | |||
| TFCR1206-4W-K-1231DT | VENKEL LTD | Thin Film CR;1206;1/4W;�100PPM;1.23K;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-1231CT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;1.23K;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-1231FT | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;1.23K;�1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-1231DT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;1.23K;�0.5% RoHS : Compliant | 0 | |||
| TFCR2010-4W-C-1231CT-1K | VENKEL LTD | Thin Film CR;2010;1/4W;�50PPM;1.23K;�0.25% RoHS : Compliant | 0 | |||
![]() Vyrian | XG8T-1231 | OMRON Corporation | Interconnection Device RoHS : Compliant | 12,536 | ||
TM4C1231D5PMI7R![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4F CPU, 80MHz, CMOS, PQFP64 RoHS : Compliant | 9,599 | |||
| TM4C1231D5PMI | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4F CPU, 80MHz, CMOS, PQFP64 RoHS : Compliant | 9,573 | |||
| TM4C1231D5PMT | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4F CPU, 80MHz, CMOS, PQFP64 RoHS : Compliant | 9,372 | |||
TM4C1231D5PMT7R![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4F CPU, 80MHz, CMOS, PQFP64 RoHS : Compliant | 7,762 | |||
TM4C1231D5PMI7![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, 80MHz, CMOS, PQFP64 | 7,408 | |||
TM4C1231C3PMI7R![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4F CPU, 80MHz, CMOS, PQFP64 RoHS : Compliant | 6,903 | |||
| TM4C1231D5PZI | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4F CPU, 80MHz, CMOS, PQFP100 RoHS : Compliant | 6,526 | |||
TM4C1231D5PMT7![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4F CPU, 80MHz, CMOS, PQFP64 RoHS : Compliant | 5,583 | |||
TM4C1231D5PMI1![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, 80MHz, CMOS, PQFP64 | 5,426 | |||
| TM4C1231D5PMIR | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4F CPU, 80MHz, CMOS, PQFP64 RoHS : Compliant | 5,076 | |||
TM4C1231C3PMI7![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, 80MHz, CMOS, PQFP64 | 4,652 | |||
| TM4C1231C3PMIR | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4F CPU, 80MHz, CMOS, PQFP64 RoHS : Compliant | 4,628 | |||
| TM4C1231D5PMTR | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4F CPU, 80MHz, CMOS, PQFP64 RoHS : Compliant | 3,908 | |||
| ZREML-1412-314PN | Amphenol Corporation | Circular Connector, 4 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle RoHS : Compliant | 652 | |||
![]() Waytek, Inc. | AT62-210-1231 | Amphenol Sine Systems | ATP/AHD-6 Female Gold Socket Contact 14-12 GA Size 12 Solid 0462-210-1231 GOLD PLATED |
| 3,355 | |
| AT60-220-1231 | Amphenol Sine Systems | ATP/AHD-6 Male Gold Pin Contact 14-12 GA Size 12 Solid 0460-220-1231 |
| 2,898 | ||
| 404-1231-032 | Trombetta | 12V Defender DC Contactor w/ 2 Pin Connector (DT06-25) |
| 1,526 | ||
| 214-1231-A61-06 | Trombetta | 12V Reverse Polarity DC Contactor |
| 415 | ||
![]() Win Source Electronics | BZX884-B12,315![]() | Nexperia | DIODE ZENER 12V 250MW SOD882 RoHS : Compliant |
| 341,650 | |
| AAT1231ITP-1-T1 | Skyworks Solutions Inc | STEP-UP DC/DC CONVERTERS FOR WHITE LED BACKLIGHT APPLICATIONS RoHS : Compliant |
| 100,000 | ||
ADS1231ID![]() | Texas Instruments | IC ADC 24BIT SRL 10/80SPS 16SOIC RoHS : Compliant |
| 50,000 | ||
ADS1231IDR![]() | Texas Instruments | IC ADC 24BIT SRL 10/80SPS 16SOIC RoHS : Compliant |
| 46,070 | ||
SMV1231-079LF![]() | Skyworks Solutions Inc | SC-79 N-TYPE SINGLE LEAD FREE RoHS : Compliant |
| 30,000 | ||
| TS51231-QFNR | Semtech Corporation | IC TRANSMITTER DVR WIRELSS 16QFN RoHS : Compliant |
| 25,451 | ||
| DS1231ID | Maxim Integrated Products | Power Monitor 5V 10% Tolerance 8-SOIC |
| 20,050 | ||
| SX1231HIML | Semtech Corporation | RF Transceiver 433/868/915MHz QFN-24 |
| 12,520 | ||
TM4C1231H6PMI7R![]() | Texas Instruments | IC MCU 32BIT 256KB FLASH 64LQFP / ARM® Cortex®-M4F series Microcontroller IC 32-Bit Single-Core 80MHz 256KB (256K x 8) FLASH 64-LQFP (10x10) RoHS : Compliant |
| 10,000 | ||
TM4C1231H6PMI7![]() | Texas Instruments | Tiva™ TM4C1231H6PM Microcontroller | IC MCU 32BIT 256KB FLASH 64LQFP RoHS : Compliant |
| 10,000 | ||
SX1231IMLTRT![]() | Semtech Corporation | IC RF TXRX ISM RoHS : Compliant |
| 9,000 | ||
CM1231-02SO![]() | onsemi | TVS DIODE 5VWM 9VC SOT23-6 RoHS : Compliant |
| 3,000 | ||
TM4C1231H6PZI7R![]() | Texas Instruments | Tiva Microcontroller RoHS : Compliant |
| 3,000 | ||
| 9ZXL1231EKILF | Renesas Electronics Corporation | IC CLOCK BUFFER HCSL 64VFQFPN RoHS : Not Compliant |
| 2,211 | ||
| TM4C1231E6PMIR | Texas Instruments | IC MCU 32BIT 128KB FLASH 64LQFP RoHS : Compliant |
| 700 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |