| データシートサーチシステム |
|
1300K-C2-R0 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() EBV Elektronik | PHE13009,127 | WeEn Semiconductor Co Ltd | Trans GP BJT NPN 400V 12A 3Pin3Tab TO220AB Tube (Alt: PHE13009,127) RoHS : Compliant | 5,000 | ||
| ACNV2601-300E | Broadcom Limited | Optocoupler Open CollectorOUT DCIN 1CH 10Pin SMD DIP TR (Alt: ACNV2601-300E) RoHS : Compliant | 3,500 | |||
| HCNW2601-300E | Broadcom Limited | (Alt: HCNW2601-300E) RoHS : Compliant | 2,436 | |||
| HCPL-2731-300E | Broadcom Limited | Optocoupler Darlington Output 2 Channel Surface Mount DIP 8 Pins 20 mA 375 kV 400 (Alt: HCPL-2731-300E) RoHS : Compliant | 1,950 | |||
ST13007D![]() | STMicroelectronics | Trans GP BJT NPN 400V 8A 3Pin3Tab TO220 Tube (Alt: ST13007D) RoHS : Compliant | 1,650 | |||
| HCPL-2631-300E | Broadcom Limited | (Alt: HCPL-2631-300E) RoHS : Compliant | 850 | |||
| ACNW3130-000E | Broadcom Limited | Optocoupler LogicOut PushPull DCIN 1CH 8Pin PDIP Tube (Alt: ACNW3130-000E) RoHS : Compliant | 588 | |||
| HCPL-2231-300E | Broadcom Limited | Optocoupler Digital Output 2 Channel 375 kV 5 Mbaud Surface Mount DIP 8 Pins (Alt: HCPL-2231-300E) RoHS : Compliant | 300 | |||
| HCPL-7721-300E | Broadcom Limited | Optocoupler LogicOut PushPull Logic BufferIN 1CH 8Pin PDIP SMD Tube (Alt: HCPL-7721-300E) RoHS : Compliant | 300 | |||
| HCPL-5761#300 | Broadcom Limited | Optocoupler ACDCIN 1CH Darlington With Base DCOUT 8Pin CDIP SMD (Alt: HCPL-5761#300) RoHS : Not Compliant | 250 | |||
| HCPL-5731#300 | Broadcom Limited | Optocoupler DCIN 2CH Darlington With Base DCOUT 8Pin CDIP SMD (Alt: HCPL-5731#300) RoHS : Not Compliant | 171 | |||
| HCNW2201-300E | Broadcom Limited | Optocoupler Digital Output 1 Channel 5 kV 5 Mbaud Surface Mount DIP 8 Pins (Alt: HCNW2201-300E) RoHS : Compliant | 168 | |||
| HCPL-4661-300E | Broadcom Limited | (Alt: HCPL-4661-300E) RoHS : Compliant | 100 | |||
| HCPL-2211-300E | Broadcom Limited | Optocoupler Digital Output 1 Channel 375 kV 5 Mbaud Surface Mount DIP 8 Pins (Alt: HCPL-2211-300E) RoHS : Compliant | 100 | |||
| HCPL-2531-300E | Broadcom Limited | Optocoupler DCIN 2CH Transistor With Base DCOUT 8Pin PDIP SMD Tube (Alt: HCPL-2531-300E) RoHS : Compliant | 50 | |||
![]() ECCO | 0580613000 | ITT Interconnect Solutions |
| 326 | ||
| 0110613000 | ITT Interconnect Solutions |
| 90 | |||
| 10-822813-000 | Amphenol Industrial Operations |
| 72 | |||
| 10-821713-000 | Amphenol Industrial Operations |
| 50 | |||
| 0190130029 | Molex | RoHS : Compliant |
| 25 | ||
| 19013-0029 | Molex |
| 25 | |||
| 1300980155 | Woodhead Molex |
| 4 | |||
| 1021013000 | ITT Interconnect Solutions |
| 3 | |||
| 102-1013-000 | ITT Interconnect Solutions |
| 3 | |||
| 057-3013-000 | ITT Interconnect Solutions |
| 2 | |||
![]() Pasternack Enterprises US | PE3C1031-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. TNC Male to TNC Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax., Radio frequency assembly TNC male to TNC male low loss cable 300 inch length using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 300 inch length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1031-300 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1031-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 300 inch length using LMR-240-UF coax. |
| 1,314 | |
| PE3W13007/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. QMA Male Right Angle to Reverse Polarity SMA Female Low Loss Cable 300 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly QMA male right angle to reverse polarity SMA female low loss cable 300 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The QMA male right angle to reverse polarity SMA female low loss cable 300 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom QMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle QMA cable connection on one end and a reverse polarity SMA cable connection on the other. Our low loss right angle QMA to reverse polarity SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W13007/HS-300 can also be known as a low loss right angle QMA plug to reverse polarity SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13007/HS-300 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. QMA plug to reverse polarity SMA jack cable assembly PE3W13007/HS-300 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13007/HS-300 can also be used in the other direction and will be a reverse polarity SMA female to right angle QMA male cable assembly if the opposite connectivity is required. Low loss QMA right angle plug to SMA reverse polarity jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal QMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 93 | ||
| PE3W13007/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. QMA Male Right Angle to Reverse Polarity SMA Female Low Loss Cable 12 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly QMA male right angle to reverse polarity SMA female low loss cable 12 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The QMA male right angle to reverse polarity SMA female low loss cable 12 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom QMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle QMA cable connection on one end and a reverse polarity SMA cable connection on the other. Our low loss right angle QMA to reverse polarity SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W13007/HS-12 can also be known as a low loss right angle QMA plug to reverse polarity SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13007/HS-12 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. QMA plug to reverse polarity SMA jack cable assembly PE3W13007/HS-12 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13007/HS-12 can also be used in the other direction and will be a reverse polarity SMA female to right angle QMA male cable assembly if the opposite connectivity is required. Low loss QMA right angle plug to SMA reverse polarity jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal QMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 93 | ||
| PE3M0241-300CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL-27478, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 118.11 inches. Temperature Conditioned TNC Male to N Female Bulkhead Low Loss Cable 300 cm Length Using PE-P300LL Coax., Pasternack temperature conditioned TNC male to N female bulkhead low loss cable 300 cm length using PE-P300LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0241-300CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability TNC to N type cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with TNC connection on one end and type N connection on the other. Our low loss TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This TNC to N type cable is a male to female coax assembly. PE3M0241-300CM can also be known as a temperature conditioned low loss TNC plug to type N jack cable assembly and will be shipped the same day after it is purchased. TNC plug to type N jack cable assembly PE3M0241-300CM is built with PE-P300LL which is a flexible coax. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency TNC male to type N female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0241-300CM can be used in the other direction and will be N type female to TNC male cable assembly. Pasternack high reliability low loss TNC plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for same-day shipment worldwide. Variations of PE44810 TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned TNC male to N female bulkhead low loss cable 300 cm length using PE-P300LL coax. |
| 0 | ||
| PE3VNA4001-300 | Pasternack Enterprises |
| 0 | |||
| PE3W13005-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. 7/16 DIN Male to 7/16 DIN Male Low Loss Cable 180 Inch Length Using LMR-600-UF Coax With Times Microwave Components., Radio frequency assembly 7/16 DIN male to 7/16 DIN male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male to 7/16 DIN male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low loss 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3W13005-180 can also be known as a low loss 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3W13005-180 is built with LMR-600-UF which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components. |
| 0 | ||
| PE3W13005-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 7/16 DIN Male to 7/16 DIN Male Low Loss Cable 36 Inch Length Using LMR-600-UF Coax With Times Microwave Components., Radio frequency assembly 7/16 DIN male to 7/16 DIN male low loss cable 36 inch length using LMR-600-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male to 7/16 DIN male low loss cable 36 inch length using LMR-600-UF coax with Times Microwave components, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low loss 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3W13005-36 can also be known as a low loss 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3W13005-36 is built with LMR-600-UF which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male low loss cable 36 inch length using LMR-600-UF coax with Times Microwave components. |
| 0 | ||
| PE3W13008 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. MMCX Plug to SMA Male Cable Using RG316-DS Coax. PE3W13008 is a MMCX plug to SMA male cable using RG316-DS coax. This Pasternack MMCX plug to SMA male cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MMCX to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13008 MMCX plug to SMA male cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3M0251-300CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL-27478, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 118.11 inches. Temperature Conditioned N Female Bulkhead to N Male Right Angle Low Loss Cable 300 cm Length Using PE-P300LL Coax., Pasternack temperature conditioned N female bulkhead to N male right angle low loss cable 300 cm length using PE-P300LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0251-300CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability type N to N type cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with type N connection on one end and right angle N type connection on the other. Our low loss type N to right angle type N cable assemblies have a female gender on end 1 and male on end 2. This type N to N type cable is a female to male coax assembly. PE3M0251-300CM can also be known as a temperature conditioned low loss type N jack to right angle N type plug cable assembly and will be shipped the same day after it is purchased. type N jack to type N plug cable assembly PE3M0251-300CM is built with PE-P300LL which is a flexible coax. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency N type female to type N right angle male cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0251-300CM can be used in the other direction and will be right angle N type male to type N female cable assembly. Pasternack high reliability low loss type N jack to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for same-day shipment worldwide. Variations of PE44807 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned N female bulkhead to N male right angle low loss cable 300 cm length using PE-P300LL coax. |
| 0 | ||
| PE3W13005-240 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm, Length, Max: 240 inches. 7/16 DIN Male to 7/16 DIN Male Low Loss Cable 240 Inch Length Using LMR-600-UF Coax With Times Microwave Components., Radio frequency assembly 7/16 DIN male to 7/16 DIN male low loss cable 240 inch length using LMR-600-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male to 7/16 DIN male low loss cable 240 inch length using LMR-600-UF coax with Times Microwave components, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low loss 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3W13005-240 can also be known as a low loss 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3W13005-240 is built with LMR-600-UF which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male low loss cable 240 inch length using LMR-600-UF coax with Times Microwave components. |
| 0 | ||
| PE3W01300-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 24 inches. MCX Plug Right Angle to MCX Jack Bulkhead Cable 24 Inch Length Using RG174 Coax., Radio frequency assembly MCX plug right angle to MCX jack bulkhead cable 24 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug right angle to MCX jack bulkhead cable 24 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MCX cable connection on one end and MCX bulkhead cable connection on the other. Our right angle MCX to MCX cable assemblies have a plug gender on end 1 and jack on end 2. This MCX to MCX cable is a plug to jack coax assembly, PE3W01300-24, can also be known as a right angle MCX male to MCX female cable assembly and will be shipped same-day as it is purchased. MCX male to MCX female cable assembly PE3W01300-24 is built with RG174 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX right angle plug to MCX jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01300-24 can also be used in the other direction and will be MCX jack bulkhead to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to MCX female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug right angle to MCX jack bulkhead cable 24 inch length using RG174 coax. |
| 0 | ||
| PE3W11300LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. MMCX Jack to SMA Male Cable Using RG174 Coax with HeatShrink, LF Solder. PE3W11300LF/HS is a MMCX jack to SMA male cable using RG174 coax. This Pasternack MMCX jack to SMA male cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our jack MMCX to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11300LF/HS MMCX jack to SMA male cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W13009LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Female Bulkhead Cable Using RG141 Coax, LF Solder. PE3W13009LF is a SMA female bulkhead to SMA female bulkhead cable using RG141 coax. This Pasternack SMA female bulkhead to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13009LF SMA female bulkhead to SMA female bulkhead cable assembly is constructed with RG141 coax. | 0 | |||
| PE3W11300 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W13004 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. 7/16 DIN Female Bulkhead to 7/16 DIN Female Bulkhead Cable Using RG58 Coax. PE3W13004 is a 7/16 DIN female bulkhead to 7/16 DIN female bulkhead cable using RG58 coax. This Pasternack 7/16 DIN female bulkhead to 7/16 DIN female bulkhead cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our female 7/16 DIN bulkhead to female 7/16 DIN bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13004 7/16 DIN female bulkhead to 7/16 DIN female bulkhead cable assembly is constructed with RG58 coax. | 0 | |||
![]() Venkel Ltd. | PWCR0805-VL-1300DT | VENKEL LTD | Pulse Withstanding CR;0805;1/2W;�200PPM;130R;�0.5% RoHS : Compliant | 0 | ||
| PWCR2010-YK-1300DT | VENKEL LTD | Pulse Withstanding CR;2010;1.25W;�100PPM;130R;�0.5% RoHS : Compliant | 0 | |||
| HPTF1206-TN-1300BT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�10PPM;130R;�0.1% RoHS : Compliant | 0 | |||
| HPTF2010-UP-1300AT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;130R;�0.05% RoHS : Compliant | 0 | |||
| HPTF2512-WC-1300CT | VENKEL LTD | High Power Thin Film CR;2512;3/4W;�50PPM;130R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-1300FT | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;130R;�1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-1300FT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;130R;�1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-1300BT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;130R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-1300DT | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;130R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-4W-E-1300CT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�25PPM;130R;�0.25% RoHS : Compliant | 0 | |||
| AGCR1206-TK-1300FT | VENKEL LTD | Auto Grade Resistor;1206;1/4W;�100PPM;130R;�1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-1300DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;130R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0603-16W-E-1300AT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�25PPM;130R;�0.05% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-1300AT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;130R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-1300BT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;130R;�0.1% RoHS : Compliant | 0 | |||
![]() Vyrian | 591-3001-007F | Dialight | Dual Color LED, Super Red/green, T-1, 2.84mm RoHS : Compliant | 13,676 | ||
| 1300060221 | Molex | Mains Power Connector, 13A, 600V, Female RoHS : Compliant | 13,209 | |||
| 1300350085 | Molex | Circular Connector Adapter RoHS : Compliant | 11,268 | |||
| AD9695BCPZ-1300 | Analog Devices Inc | ADC, Proprietary Method, 14-Bit, 1 Func, 2 Channel, Serial Access RoHS : Compliant | 8,547 | |||
STH13009![]() | STMicroelectronics | Power Bipolar Transistor, 12A I(C), 400V V(BR)CEO, 1-Element, NPN, Silicon, TO-220AB, Plastic/Epoxy, 3 Pin RoHS : Compliant | 6,625 | |||
| HCPL-2231-300E | Broadcom Limited | RoHS : Compliant | 4,565 | |||
| ACNW3130-000E | Broadcom Limited | RoHS : Compliant | 4,276 | |||
MJE13006![]() | STMicroelectronics | Power Bipolar Transistor, 8A I(C), 300V V(BR)CEO, 1-Element, NPN, Silicon, TO-220AB, Plastic/Epoxy, 3 Pin RoHS : Not Compliant | 3,440 | |||
LF13006N![]() | Texas Instruments | Analog Circuit, 1 Func, PDIP16 | 3,018 | |||
| 1300238029 | Molex | Circular Connector | 721 | |||
| 1300060549 | Molex | Circular Connector RoHS : Compliant | 587 | |||
| 1300130076 | Molex | Circular Connector RoHS : Compliant | 555 | |||
1300100875![]() | Molex | Cable Assembly RoHS : Compliant | 527 | |||
| 1300550004 | Molex | Cable Assembly RoHS : Compliant | 387 | |||
| 2600130082 | Wurth Elektronik | Mobile Station Antenna | 247 | |||
![]() Waytek, Inc. | 19130-0005 | Molex | 22-18 GA #6 Spade Terminal Red Vinyl Insulated 30110 30553 30753 30523 30113 |
| 18,155 | |
| 19130-0045 | Molex | 16-14 GA #8 Spade Terminal Blue Vinyl Insulated |
| 18,118 | ||
| 19130-0044 | Molex | 16-14 GA #6 Spade Terminal Insulated Blue Vinyl |
| 11,386 | ||
| 19130-0046 | Molex | 16-14 GA #10 Spade Terminal Blue Insulated Vinyl |
| 10,400 | ||
| 19130-0006 | Molex | 22-18 GA #8 Spade Terminal Red Vinyl Insulated |
| 9,611 | ||
| 19130-04M | Eaton Electronics | 30 AMP MAXI Circuit Breaker ATC Blade Buss 19130-04M |
| 438 | ||
| 21130-00 | Eaton Electronics | 30 AMP Mini Circuit Breaker Type I Bussmann 21130-00 CB211-30 |
| 160 | ||
| 22130-000 | Eaton Electronics | 30 AMP Circuit Breaker Type 1 ATC Blade Bussmann 22130-000 |
| 125 | ||
| 8710-1300B | Egis Mobile Electric | XD Series - Programmable ACR |
| 62 | ||
| MG-1300 | Advanced Cable Ties Inc | The ACT MG-1300 is a cable tie removal tool designed to safely cut and remove cable ties without damaging bundled wires or components. Compatible with 18250 lb. cable ties, it features dual safety guards that slide behind the strap to protect cables during removal. Built with heat-treated alloy steel blades and an ergonomic cushion grip, it provides durable, controlled cutting for automotive, electrical, and industrial applications. |
| 52 | ||
| 3130-000N | QuickCable Corporation | 3/0 GA Crimpable Battery Lug Negative, Right Elbow |
| 50 | ||
| 6001-3001B | Egis Mobile Electric | TH Series Time Delay Relay 200A, OEM Bulk Pack |
| 36 | ||
![]() Win Source Electronics | TCUT1300X01 | Vishay Huntington | Subminiature Dual Channel Transmissive Optical Sensor with |
| 28,000 | |
AMC1300DWV![]() | Texas Instruments | IC ISOLATION 8SOIC / Isolation IC Current Sensing, Power Management 8-SOIC RoHS : Compliant |
| 25,547 | ||
| HCNW2201-300E | Broadcom Limited | OPTOISO 5KV PUSH PULL 8DIP GW RoHS : Compliant |
| 12,940 | ||
| VLMS1300-GS08 | Vishay Huntington | LED RED 0603 SMD |
| 9,000 | ||
ADUM1300ARWZ![]() | Analog Devices Inc | DGTL ISO 2.5KV GEN PURP 16SOIC RoHS : Compliant |
| 4,320 | ||
ADUM1300ARW-RL![]() | Analog Devices Inc | DGTL ISO 2.5KV GEN PURP 16SOIC RoHS : Not Compliant |
| 4,210 | ||
| SPL13-001 | Goertek | 30Kpa~1.1bar LGA-8(3.7x3.7) Pressure Sensors, Transducers - Industrial RoHS |
| 3,700 | ||
HD6413003TF16V![]() | Renesas Electronics Corporation | MCU 8-bit H8/300H CISC ROMLess 5V 112-Pin PQFP RoHS : Compliant |
| 3,662 | ||
| FJP13009 | onsemi | High Voltage Switch Mode Application | TRANS NPN 400V 12A TO-220 |
| 3,205 | ||
| GX1-300B-85-2.0 | Texas Instruments | RoHS : Not Compliant |
| 2,000 | ||
ADUM1300BRW![]() | Analog Devices Inc | Triple-Channel Digital Isolators | DGTL ISO 2.5KV GEN PURP 16SOIC RoHS : Not Compliant |
| 1,764 | ||
| HCPL-5501#300 | Broadcom Limited | OPTOISO 1.5KV TRANS W/BASE 8SMD RoHS : Not Compliant |
| 1,555 | ||
| AD9695BCPZ-1300 | Analog Devices Inc | IC ADC 14BIT PIPELINED 64LFCSP RoHS : Compliant |
| 1,450 | ||
| FI-RE41S-VF-R1300 | JAE Electronics | CONN RCPT 0.5MM 41 POS / Conn High Speed Fine Pitch Connector RCP 41 POS 0.5mm Solder ST SMD T/R |
| 1,089 | ||
ADUM1300BRWZ-RL![]() | Analog Devices Inc | DGTL ISO 2.5KV GEN PURP 16SOIC RoHS : Compliant |
| 920 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |