15336-R2 Price, 販売店, Stock

1 : $31.818
5 : $29.661
10 : $26.515
25 : $26.119
50 : $26.119
100 : $25.735
250 : $25.0
500 : $24.306
1,000 : $23.973
2,500 : $23.973
10,000 : $23.973

6326-208-15336

TE Connectivity

Circular Conn

1 : $14.691
5 : $13.695
10 : $12.242
25 : $12.06
50 : $12.06
100 : $11.882
250 : $11.543
500 : $11.222
1,000 : $11.068
2,500 : $11.068
10,000 : $11.068

202D153-3-60-0-CS5077

TE Connectivity

Harness Mgmt
RoHS : Compliant

1 : $55.95
5 : $55.95
10 : $55.95
25 : $55.95
50 : $55.95
100 : $55.95
250 : $55.95
500 : $49.733
1,000 : $47.617
2,500 : $47.617
10,000 : $38.586

Y6326-208-15336000

TE Connectivity

Connector 38999

1 : $42.364
5 : $39.492
10 : $35.303
25 : $34.776
50 : $34.776
100 : $34.265
250 : $33.286
500 : $32.361
1,000 : $31.918
2,500 : $31.918
10,000 : $31.918

Master Electronics

15336674

Aptiv PLC

Connector Accessories Seal Blue Individual
RoHS : Compliant

75,000 : $0.0227
56,250 : $0.0232
37,500 : $0.0293
18,750 : $0.0476
10,000 : $0.0501
1,000 : $0.0527
500 : $0.0555
210 : $0.0584

115,000

15336703

Aptiv PLC

Seal Cbl 1W M/P Blue
RoHS : Compliant

150,000 : $0.0785
100,000 : $0.0787
50,000 : $0.0806
30,000 : $0.0808
10,000 : $0.0854
5,000 : $0.0906
500 : $0.1107

2,500

115336-2024

ITT Interconnect Solutions

KPSE0E2039P-DX; MIL-DTL 26482 Series I & Mil Batte
RoHS : Not Compliant

50 : $77.62
38 : $79.2
25 : $114.05
13 : $207.14

202D153-3-60/42-0

TE Connectivity

202D153-3-60/42-0 MOQ Reduction
RoHS : Compliant

125 : $25.58
94 : $26.1
63 : $36.89
32 : $68.6

115336-2043

ITT Interconnect Solutions

KPSE0E1626S-DX; MIL-DTL 26482 Series I & Mil Batte
RoHS : Not Compliant

50 : $53.74
38 : $54.84
25 : $70.19
13 : $109.67

ZPF000000000015336

TE Connectivity

DMC-M 42 W 01 MOQ Reduction
RoHS : Not Compliant

50 : $149.8
38 : $152.85
25 : $225.23
13 : $410.33

115336-0016

ITT Interconnect Solutions

KPT0E1210PDX; MIL-DTL 26482 Series I & Mil Battery
RoHS : Not Compliant

50 : $39.97
38 : $40.79
25 : $52.21
13 : $81.58

115336-2005

ITT Interconnect Solutions

KPSE0E1210S-DX; MIL-DTL 26482 Series I & Mil Batte
RoHS : Not Compliant

50 : $41.99
38 : $42.85
25 : $54.85
13 : $85.7

115336-2037-X

ITT Interconnect Solutions

KPSE0E1419PX-DX; MIL-DTL 26482 Series I & Mil Batt
RoHS : Not Compliant

50 : $49.71
38 : $50.73
25 : $64.93
13 : $101.45

011533613

TE Connectivity

ABB-CONNECTION - SNA SERIES SCREW TERMINAL BLOC MOQ Reduction
RoHS : Compliant

45 : $28.45
34 : $29.03
23 : $36.14
12 : $56.29

1533628

Phoenix Contact

SAC-3P-M 8 MS/2 5-PUR/M 8FS
RoHS : Compliant

5 : $27.01
1 : $28.43

1SNA115336R1300

TE Connectivity

ABB-CONNECTION - SNA SERIES SCREW TERMINAL BLOC MOQ Reduction
RoHS : Compliant

45 : $28.45
34 : $29.03
23 : $36.14
12 : $56.29

115336-2014

ITT Interconnect Solutions

KPSE0E168P-DX; MIL-DTL 26482 Series I & Mil Batter
RoHS : Not Compliant

50 : $47.77
38 : $48.75
25 : $62.4
13 : $97.5

115336-2015

ITT Interconnect Solutions

KPSE0E168S-DX; MIL-DTL 26482 Series I & Mil Batter
RoHS : Not Compliant

50 : $60.22
38 : $61.45
25 : $78.66
13 : $122.9

115336-2044

ITT Interconnect Solutions

Conn MIL-C-26482 Circular SKT 41 POS Crimp ST Wall Mount 41 Terminal 1 Port
RoHS : Not Compliant

50 : $73.77
38 : $75.28
25 : $108.4
13 : $196.87

Neutron USA

1533615

Phoenix Contact

Sensor/Actuator Cable, Male straight M12 5p --- Female str M12 5p, 5wire 5m, PUR B-G, SAC-5P-M12MS/5,0-PUR/M12FS
RoHS : Compliant

1 : $57.97

Pasternack Enterprises US

PE34153-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to N Female Bulkhead Cable 36 Inch Length Using PE-SR047FL Coax., Radio frequency assembly SMA male to N female bulkhead cable 36 inch length using PE-SR047FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead cable 36 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type bulkhead cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly, PE34153-36, can also be known as a SMA plug to N type jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE34153-36 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34153-36 can also be used in the other direction and will be type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead cable 36 inch length using PE-SR047FL coax.

1 : $171.99
25 : $163.39
50 : $154.79

132

PE3W15336/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Water Blue FAKRA Jack to TNC Female Bulkhead Low Loss Cable Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack to TNC female bulkhead low loss cable using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The water blue FAKRA jack to TNC female bulkhead low loss cable using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FAKRA cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss FAKRA to TNC cable assembly has a jack gender on end 1 and a female on end 2. PE3W15336/HS can also be known as a low loss FAKRA female to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15336/HS RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. FAKRA female to TNC jack cable assembly PE3W15336/HS is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15336/HS can also be used in the other direction and will be a TNC female bulkhead to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3W15336/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Water Blue FAKRA Jack to TNC Female Bulkhead Low Loss Cable 36 Inch Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack to TNC female bulkhead low loss cable 36 inch length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The water blue FAKRA jack to TNC female bulkhead low loss cable 36 inch length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FAKRA cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss FAKRA to TNC cable assembly has a jack gender on end 1 and a female on end 2. PE3W15336/HS-36 can also be known as a low loss FAKRA female to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15336/HS-36 RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. FAKRA female to TNC jack cable assembly PE3W15336/HS-36 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15336/HS-36 can also be used in the other direction and will be a TNC female bulkhead to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $86.69
25 : $82.36
50 : $78.02
100 : $74.55

PE3W15336/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Water Blue FAKRA Jack to TNC Female Bulkhead Low Loss Cable 24 Inch Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack to TNC female bulkhead low loss cable 24 inch length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The water blue FAKRA jack to TNC female bulkhead low loss cable 24 inch length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FAKRA cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss FAKRA to TNC cable assembly has a jack gender on end 1 and a female on end 2. PE3W15336/HS-24 can also be known as a low loss FAKRA female to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15336/HS-24 RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. FAKRA female to TNC jack cable assembly PE3W15336/HS-24 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15336/HS-24 can also be used in the other direction and will be a TNC female bulkhead to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86

PE3W15336/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Water Blue FAKRA Jack to TNC Female Bulkhead Low Loss Cable 48 Inch Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack to TNC female bulkhead low loss cable 48 inch length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The water blue FAKRA jack to TNC female bulkhead low loss cable 48 inch length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FAKRA cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss FAKRA to TNC cable assembly has a jack gender on end 1 and a female on end 2. PE3W15336/HS-48 can also be known as a low loss FAKRA female to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15336/HS-48 RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. FAKRA female to TNC jack cable assembly PE3W15336/HS-48 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15336/HS-48 can also be used in the other direction and will be a TNC female bulkhead to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

PE3W15336/HS-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Water Blue FAKRA Jack to TNC Female Bulkhead Low Loss Cable 100 CM Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack to TNC female bulkhead low loss cable 100 cm length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The water blue FAKRA jack to TNC female bulkhead low loss cable 100 cm length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FAKRA cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss FAKRA to TNC cable assembly has a jack gender on end 1 and a female on end 2. PE3W15336/HS-100CM can also be known as a low loss FAKRA female to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15336/HS-100CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. FAKRA female to TNC jack cable assembly PE3W15336/HS-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15336/HS-100CM can also be used in the other direction and will be a TNC female bulkhead to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $86.69
25 : $82.36
50 : $78.02
100 : $74.55

PE3W15336/HS-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Water Blue FAKRA Jack to TNC Female Bulkhead Low Loss Cable 200 CM Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack to TNC female bulkhead low loss cable 200 cm length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The water blue FAKRA jack to TNC female bulkhead low loss cable 200 cm length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FAKRA cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss FAKRA to TNC cable assembly has a jack gender on end 1 and a female on end 2. PE3W15336/HS-200CM can also be known as a low loss FAKRA female to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15336/HS-200CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. FAKRA female to TNC jack cable assembly PE3W15336/HS-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15336/HS-200CM can also be used in the other direction and will be a TNC female bulkhead to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

PE36153-36

Pasternack Enterprises

Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 36 inches. 75 Ohm F Male to 75 Ohm BNC Male Cable 36 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm F male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm F male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with F type cable connection on one end and BNC cable connection on the other. Our type F to BNC cable assemblies have a male gender on end 1 and male on end 2. This type F to BNC cable is a male to male coax assembly, PE36153-36, can also be known as a type F plug to BNC plug cable assembly and will be shipped same-day as it is purchased. F type plug to BNC plug cable assembly PE36153-36 is built with RG179 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type F male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36153-36 can also be used in the other direction and will be BNC male to F type male cable assembly if the opposite connectivity is required. Type F plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to BNC cable assembly for quick shipment worldwide. Variations of F type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG179 coax.

1 : $54.59
25 : $51.86
50 : $49.13
100 : $46.95

PE3C2153-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to BNC Male Cable 36 Inch Length Using RG223 Coax., Radio frequency assembly N male to BNC male cable 36 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to BNC male cable 36 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and BNC cable connection on the other. Our type N to BNC cable assembly has male gender on end 1 and male on end 2. PE3C2153-36 can also be known as a type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Type N plug to BNC plug cable assembly PE3C2153-36 is built with RG223 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to BNC cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this PE3C2153-36 RF cable are available on our downloadable PDF datasheet.PE3C2153-36 can also be used in the other direction and will be BNC male to N type male cable assembly if the opposite connectivity is required. Type N plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements.

1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61

Vyrian

1715336

Phoenix Contact

Barrier Strip Terminal Block, 17.5A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

8,983

15336-R2 販売店

リンク URL