 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
15VS-D6-R/ 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 ComSIT USA | EFIT16A115V0V10PAENGSELFCLNOFUSE | WTLO | AVAILABLE EU | 4 | ||
 GLYN GmbH & Co. KG | TK115V65Z5,LQ(S | Toshiba America Electronic Components | MOSFET single N-CH 650V 23A 0.115ÿΩ DFN8x8 | 12,500 | ||
 PUI | CZRQR15VB-HF | 35,000 | ||||
 Rutronik | PTS060315V005 | Eaton Electronics | Resettable Fuse 0.05A 15V 0603 RoHS : Compliant |
| 5,000 | |
| BK1-H15-V-1-B | Eaton Electronics | HOLDER 5x20 CLIP SINGLE RoHS : Compliant |
| 2 | ||
 Avnet Asia | MMBZ15VDL-QR | Nexperia | (Alt: MMBZ15VDL-QR) RoHS : Compliant |
| 99,000 | |
| PESD15VL2BT-QR | Nexperia | (Alt: PESD15VL2BT-QR) RoHS : Compliant | 45,000 | |||
| MPI4015V2-R33-R | Eaton Corporation | (Alt: MPI4015V2-R33-R) RoHS : Compliant |
| 15,000 | ||
| PESD15VL1BA-QX | Nexperia | (Alt: PESD15VL1BA-QX) RoHS : Compliant | 6,000 | |||
| F1206HA15V024TM | AEM Inc | (Alt: F1206HA15V024TM) RoHS : Compliant |
| 3,000 | ||
PESD15VS5UD,115 | Nexperia | TVS Diode, PESDxS5UD Series (Alt: PESD15VS5UD,115) RoHS : Compliant |
| 3,000 | ||
PTVS15VS1UR,115 | Nexperia | TVS Diode, PTVSxS1UR Series, Unidirectional, 15 V, 24.4 V, SOD-123, 2 Pins (Alt: PTVS15VS1UR,115) RoHS : Compliant | 0 | |||
| MPI4015V2-R22-R | Eaton Corporation | (Alt: MPI4015V2-R22-R) RoHS : Compliant |
| 0 | ||
PESD15VS2UQ,115 | Nexperia | TVS Diode, PESDxS2UQ Series (Alt: PESD15VS2UQ,115) RoHS : Compliant | 0 | |||
| MM5Z15VT1G | onsemi | 500 mW Standard Tolerance Zener Diode Voltage Regulators 15 V. (Alt: MM5Z15VT1G) RoHS : Compliant | 0 | |||
| MMBZ15VAL-QR | Nexperia | (Alt: MMBZ15VAL-QR) RoHS : Compliant | 0 | |||
| SZMMBZ15VDLT3G | onsemi | Zener Diode Protection, 40 Watt Peak Power, SOT-23. (Alt: SZMMBZ15VDLT3G) RoHS : Compliant | 0 | |||
MMBZ15VDL,215 | Nexperia | ESD Suppressor TVS 30KV 3-Pin TO-236AB T/R (Alt: MMBZ15VDL,215) RoHS : Compliant | 0 | |||
PTS120615V050 | Eaton Corporation | Resettable Fuse, PPTC, 1206 (3216 Metric), PolyTron PTS1206, 15 VDC, 500 mA, 1 A, 0.1 s (Alt: PTS120615V050) RoHS : Compliant | 0 | |||
| PTVS15VS1UTR,115 | Nexperia | TVS Diode, PTVSxS1UTR Series, Unidirectional, 15 V, 24.4 V, CFP3, 2 Pins (Alt: PTVS15VS1UTR,115) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | DBP.915.V.A.30 | Taoglas Antenna Solutions | DBP.915.V.A.30 Dielectric Band Pass Filter for 915MHz 8.7*6.0*3.0mm, Bandwidth 5MHz |
| 0 | |
 Chip-Germany GmbH | PSA313-500/5A-KL1-5VA | Mirmer | 6 | |||
| PW230V.15V | Rinck Electronics Germany GmbH | 2 | ||||
| ASK 21.3 500/5A KL.1 5VA | Mbsmer | 1 | ||||
 DB Roberts | 4215V | Heyco | CH RA-119 ABV NATURAL | 0 | ||
| 7015VA | Sugatsune Kogyo Co Ltd | POINTFIX 60 GLASS STANDOFF | 0 | |||
 FDH Electronics | 326402A115V400HZ | STPI Siege Social | Relays & Cont | 168 | ||
| MS3320-E15V | Crouzet | Circuit Breaker |
| 0 | ||
| M28804/1-5V | Aptiv PLC | Connector |
| 0 | ||
| KC-18/115VDC | TE Connectivity | Relays RoHS : Not Compliant |
| 0 | ||
| M85049/130-15V | Glenair Inc | Connector |
| 0 | ||
| HC-1/115VDC | TE Connectivity | Relays RoHS : Not Compliant |
| 0 | ||
| HC-2/115VDC | TE Connectivity | Relays RoHS : Not Compliant |
| 0 | ||
| HC-3/115VDC | TE Connectivity | Relays RoHS : Not Compliant |
| 0 | ||
| HC-4/115VDC | TE Connectivity | Relays RoHS : Not Compliant |
| 0 | ||
| HC-5/115VDC | TE Connectivity | Relays RoHS : Not Compliant |
| 0 | ||
 Maritex | ULO-TB01-15VC/3.5-03P-4 | ULO | Pluggable terminal block; pitch 3.50mm; 3-ways; male; straight pin header; closed type; UL 300V/8A; TUV:250V/7A |
| 12,501 | |
| ULO-TB13-15VC/3.81-05P-4 | ULO | Pluggable terminal block; pitch 3.81mm; 5-ways; male; straight pin header; closed type; UL 300V/10A; TUV:300V/10.5A |
| 6,748 | ||
| ULO-TB13-15VC/3.81-08P-4 | ULO | Pluggable terminal block; pitch 3.81mm; 8-ways; male; straight pin header; closed type; UL 300V/10A; TUV:300/10.5A |
| 5,974 | ||
| ULO-TB01-15VC/3.5-05P-4 | ULO | Pluggable terminal block; pitch 3.50mm; 5-ways; male; straight pin header; closed type; UL 300V/8A; TUV:250V/7A |
| 5,400 | ||
| ULO-TB01-15VC/3.5-07P-4 | ULO | Pluggable terminal block; pitch 3.50mm; 7-ways; male; straight pin header; closed type; UL 300V/8A; TUV:250V/7A |
| 2,712 | ||
| ULO-TB13-15VC/3.81-04P-4 | ULO | Pluggable terminal block; pitch 3.81mm; 4-ways; male; straight pin header; closed type; UL 300V/10A; TUV:300V/10.5A |
| 2,540 | ||
| ULO-TB13-15VC/3.81-06P-4 | ULO | Pluggable terminal block; pitch 3.81mm; 6-ways; male; straight pin header; closed type; UL 300V/10A; TUV:300V/10.5A |
| 2,357 | ||
| ULO-TB01-15VC/3.5-09P-4 | ULO | Pluggable terminal block; pitch 3.50mm; 9-ways; male; straight pin header; closed type; UL 300V/8A; TUV:250V/7A |
| 2,303 | ||
| ULO-TB13-15VC/3.81-03P-4 | ULO | Pluggable terminal block; pitch 3.81mm; 3-ways; male; straight pin header; closed type; UL 300V/10A; TUV:300V/10.5A |
| 1,332 | ||
| ULO-TB13-15VC/3.81-09P-4 | ULO | Pluggable terminal block; pitch 3.81mm; 9-ways; male; straight pin header; closed type; UL 300V/10A; TUV:3000V/10.5A |
| 1,254 | ||
| ULO-TB01-15VC/3.5-04P-4 | ULO | Pluggable terminal block; pitch 3.50mm; 4-ways; male; straight pin header; closed type; UL 300V/8A; TUV:250V/7A |
| 1,204 | ||
| ULO-TB01-15VM/3.5-08P-4 | ULO | Pluggable terminal block; pitch 3.50mm; 8-ways; male; straight pin header; flanged with screws type; UL 300V/8A; TUV:250V/7A |
| 800 | ||
| ULO-TB13-15VC/3.81-10P-4 | ULO | Pluggable terminal block; pitch 3.81mm; 10-ways; male; straight pin header; closed type; UL 300V/10A; TUV:300V/10.5A |
| 507 | ||
| ULO-TB01-15VC/3.5-06P-4 | ULO | Pluggable terminal block; pitch 3.50mm; 6-ways; male; straight pin header; closed type; UL 300V/8A; TUV:250V/7A |
| 479 | ||
| ULO-TB01-15VC/3.5-10P-4 | ULO | Pluggable terminal block; pitch 3.50mm; 10-ways; male; straight pin header; closed type; UL 300V/8A; TUV:250V/7A |
| 354 | ||
 Pasternack Enterprises US | PE3C8815/VL | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-VL, RF Cable Type: Belden 1694A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-VL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-VL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/VL, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/VL is built with Belden 1694A-VL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/VL can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-VL coax. | 755 | ||
| PE3C8815/VL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-VL, RF Cable Type: Belden 1694A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-VL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-VL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/VL-12, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/VL-12 is built with Belden 1694A-VL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/VL-12 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-VL coax. |
| 209 | ||
| PE3C8815/VL-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-VL, RF Cable Type: Belden 1694A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-VL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-VL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/VL-36, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/VL-36 is built with Belden 1694A-VL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/VL-36 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-VL coax. |
| 209 | ||
| PE3C8815/VL-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-VL, RF Cable Type: Belden 1694A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-VL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-VL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/VL-72, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/VL-72 is built with Belden 1694A-VL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/VL-72 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-VL coax. |
| 183 | ||
| PE3C8815/VL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-VL, RF Cable Type: Belden 1694A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-VL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-VL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/VL-120, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/VL-120 is built with Belden 1694A-VL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/VL-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-VL coax. |
| 110 | ||
| PE3C8815/VL-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-VL, RF Cable Type: Belden 1694A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-VL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-VL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/VL-300, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/VL-300 is built with Belden 1694A-VL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/VL-300 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-VL coax. |
| 44 | ||
 TE Connectivity | 2MM-HSP-D15-VT-02-H-TB | TE Connectivity | 30P,2MM,PL HDR,DRVT,2.8,0.76AU,TB Part Number: 2MM-HSP-D15-VT-02-H-TB | Internal Number: 3-2823408-0 | TE Connectivity RoHS : Compliant |
| 1,463 | |
| ANT-915-VHETH | TE Connectivity | Antenna Vert Coil 915MHz Base THM Antenna Type: Helical Band Type: Single Band Primary Application: LoRaWAN LPWAN Communication Protocol: Wi-Fi LoRaWAN LPWAN Mounting Location: Internal/Embedded Helical Single Band LoRaWAN Wi-Fi | Antenna | Part Number: ANT-915-VHETH | Internal Number: ANT-915-VHETH | TE Connectivity RoHS : Compliant |
| 780 | ||
| 4525DO-SS3BS015VPF | TE Connectivity | PRESS,XDCR,4525DO-SS3BS015VPF Pressure Sensor Type: Digital Pressure and Altimeter Sensor Modules Pressure Type: Vacuum Proof Pressure Range: 300 psi Pressure: 15 psi Output Signal Details: 14 bit ADC Digital Pressure and Altimeter Sensor Modules Vacuum 300 psi 15 psi | Board Mount Pressure Sensor | Part Number: 4525DO-SS3BS015VPF | Internal Number: 10207704-00 | TE Connectivity RoHS : Compliant |
| 29 | ||
| 15VT6 | TE Connectivity | 15VT6=F7336 S0 Current Rating: 15 A Input Termination Type: Stud Output Termination Type: Stud Leakage Current (Max) (120VAC, 60Hz): 1.2 mA Leakage Current (Max) (250VAC, 50Hz): 2 mA Single Phase Filters & Corcom T Series | 15 A Stud 1.2 mA | Part Number: 15VT6 | Internal Number: 6609047-4 | TE Connectivity RoHS : Compliant |
| 13 | ||
 Vyrian | PESD15VS2UQ | Nexperia | Trans Voltage Suppressor Diode, 150W, 15V V(RWM), Unidirectional, 2 Element, Silicon RoHS : Compliant | 14,053 | ||
| PESD15VS5UD | Nexperia | Trans Voltage Suppressor Diode, 200W, 15V V(RWM), Unidirectional, 5 Element, Silicon RoHS : Compliant | 13,525 | |||
| CY7C1021BN-15VXI | Infineon Technologies AG | Standard SRAM, 64KX16, 15ns, CMOS, PDSO44 | 12,441 | |||
| MMBZ15VDL/DG | Nexperia | Trans Voltage Suppressor Diode, 12.8V V(RWM), Unidirectional, 1 Element, Silicon, TO-236AB | 11,855 | |||
| MMBZ15VAL-QR | Nexperia | RoHS : Compliant | 10,452 | |||
| PESD15VW1BCSF | Nexperia | Trans Voltage Suppressor Diode RoHS : Compliant | 8,581 | |||
| 40PC015V2A | Honeywell Sensing And Control | Vacuum Gage, 0Psi Min, -15Psi Max, 0.4%, 4.5V, Rectangular, Surface Mount | 8,533 | |||
| HLMP-CW15-VYBDD | Broadcom Limited | RoHS : Compliant | 8,442 | |||
BQ24170EVM-610-15V | Texas Instruments | Development kits/Accessories RoHS : Compliant | 7,804 | |||
| PESD15VL1BA-Q | Nexperia | Trans Voltage Suppressor Diode RoHS : Compliant | 7,481 | |||
| PTVS15VS1UR-Q | Nexperia | Trans Voltage Suppressor Diode RoHS : Compliant | 7,251 | |||
| MM5Z15VT1G | onsemi | Zener Diode, 15V V(Z), 4.98%, 0.5W, Silicon, Unidirectional RoHS : Compliant | 6,503 | |||
| PTVS15VS1UR | Nexperia | Trans Voltage Suppressor Diode, 400W, 15V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant | 4,934 | |||
| HLMP-EL15-VYKDD | Broadcom Limited | RoHS : Compliant | 3,317 | |||
| PTVS15VP1UTP | Nexperia | Trans Voltage Suppressor Diode, 600W, 15V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant | 3,194 | |||
 Waytek, Inc. | 14/1 UL1015 VIOLET | Unified Wire and Cable Inc | 14GA Violet MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 17,900 | |
| 16/1 UL1015 VIOLET | Unified Wire and Cable Inc | 16GA Violet MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 14,250 | ||
| 18/1 UL1015 VIOLET | Unified Wire and Cable Inc | 18GA Violet MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 2,500 | ||
 Win Source Electronics | PESD15VL1BA | Nexperia | ESD Suppressor Diode TVS Bi-Dir 15V Automotive 2-Pin SOD-323 / Low capacitance bidirectional ESD protection diodes in RoHS : Compliant |
| 619,007 | |
| MM3Z15VT1G | onsemi | DIODE ZENER 15V 300MW SOD323 / Zener Diode Single 15V 5% 30Ohm 300mW 2-Pin SOD-323 T/R RoHS : Compliant |
| 291,000 | ||
MMBZ15VALT1G | onsemi | TVS DIODE 12VWM 21VC SOT23 RoHS : Compliant |
| 264,000 | ||
| MMBZ15VAL-QR | Nexperia | MMBZ15VAL-Q/SOT23/TO-236AB RoHS : Compliant |
| 180,000 | ||
| MM5Z15VT1G | onsemi | DIODE ZENER 15V 200MW SOD523 RoHS : Compliant |
| 91,980 | ||
| PTVS15VS1UR | Nexperia | 400 W Transient Voltage Suppressor / TVS Diode Single Uni-Dir 15V 400W Automotive 2-Pin SOD-123W RoHS : Compliant |
| 90,000 | ||
| JS1-5V-F | Panasonic Electronic Components | RELAY GEN PURPOSE SPDT 10A 5V RoHS : Compliant |
| 80,000 | ||
| MMBZ15VALQ-7-F | Diodes Incorporated | IC TRANSISTOR ARRAY SMD / Clamp Ipp Tvs Diode RoHS : Compliant |
| 55,220 | ||
| PESD15VS1UL | Nexperia | ESD protection diodes in a SOD882 package RoHS : Compliant |
| 40,000 | ||
| MMBZ15VAL | Diodes Incorporated | 24W AND 40W PEAK POWER DUAL SURFACE MOUNT TVS RoHS : Not Compliant |
| 30,000 | ||
| G5V-1-5VDC | OMRON Corporation |
| 27,030 | |||
| PESD15VS2UQ | Nexperia | Double ESD protection diodes in SOT663 package RoHS : Compliant |
| 16,000 | ||
XC9536-15VQG44C | AMD Xilinx | IC CPLD 36MC 15NS 44VQFP RoHS : Compliant |
| 1,661 | ||
| CY7C199CNL-15VXIT | Cypress Semiconductor | IC SRAM 256KBIT PARALLEL 28SOJ / SRAM - Asynchronous Memory IC 256Kb (32K x 8) Parallel 15 ns 28-SOJ RoHS : Compliant |
| 990 | ||
| MPXV6115V6U | Nexperia | PRESSURE SENSOR |
| 174 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand