160CCNSWNTZCWC Price, 販売店, Stock

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Female Cable 60 Inch Length Using RG142 Coax., Radio frequency assembly SMA male to SMA female cable 60 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 60 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3611-60, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3611-60 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3611-60 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 60 inch length using RG142 coax.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

806

PE33421-60

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 60 inches. 75 Ohm BNC Male to 75 Ohm BNC Female Bulkhead Cable 60 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC female bulkhead cable 60 inch length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC female bulkhead cable 60 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE33421-60, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE33421-60 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33421-60 can also be used in the other direction and will be BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC female bulkhead cable 60 inch length using 75 Ohm RG179 coax.

1 : $75.99
25 : $72.19
50 : $68.39
100 : $65.35

194

PE3C9831-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to SMA Male Right Angle Low Loss Cable 60 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly N male to SMA male right angle low loss cable 60 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male right angle low loss cable 60 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle SMA cable connection on the other. Our low loss type N to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C9831-60 can also be known as a low loss type N plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C9831-60 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9831-60 can also be used in the other direction and will be right angle SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA male right angle low loss cable 60 inch length using TCOM-240 coax with Times Microwave components.

1 : $84.99
25 : $80.74
50 : $76.49
100 : $73.09

PE3M0021-60

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 60 inches. MIL-DTL-17 N Female Bulkhead to SMA Male Right Angle Cable 60 Inch Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to SMA male right angle cable 60 inch length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to SMA male right angle cable 60 inch length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 type N to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 type N bulkhead cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our M39012/03-0503 N type to right angle M39012/56-3109 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 type N to M39012/56-3109 SMA cable is a female to male coax assembly, PE3M0021-60, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 type N jack to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 N type jack to M39012/56-3109 SMA plug cable assembly PE3M0021-60 is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 type N female bulkhead to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0021-60 can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/03-0503 N type female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 type N jack bulkhead to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 type N to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/03-0503 N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to SMA male right angle cable 60 inch length using M17/60-RG142 coax.

1 : $387.99
25 : $368.59
50 : $349.19

PE1603

Pasternack Enterprises

Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: Solder Pin, Minimum Frequency: 1 GHz, Maximum Frequency: 5 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 50 Volts, Maximum DC Current: 1,000 mA. 1 GHz to 5 GHz SMA Bias Tee Rated to 1000 mA and 50 Volts DC. PE1603 bias tee (also called bias T) has an SMA connector RF port that is female gender. This Pasternack female SMA bias tee design is rated for a minimum frequency of 1 GHz and a maximum frequency of 5 GHz. Our RF coaxial bias tee has a solder pin DC port connector with a female gender. This SMA bias tee / T is rated for a max. DC voltage of 50 Volts and a max. current of 1,000 mA. The PE1603 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 25 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $610.0
10 : $585.6
25 : $561.2

PE3MSA00481-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Lead Free 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02003, 60" Cable., Radio frequency assembly lead free 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00481-60 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00481-60 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00481-60 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 60" cable.

1 : $163.99
25 : $155.79
50 : $147.59
100 : $141.03

PE36160-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMP Female to SMP Female Right Angle Cable 36 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMP female to SMP female right angle cable 36 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female to SMP female right angle cable 36 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and right angle SMP cable connection on the other. Our SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE36160-36, can also be known as a SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE36160-36 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 26.5 GHz maximum frequency SMP female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36160-36 can also be used in the other direction and will be right angle SMP female to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMP female right angle cable 36 inch length using PE-SR405FL coax.

1 : $107.99
25 : $102.59
50 : $97.19

PE3C1609/HS2-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMB Plug to SMA Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMB plug to SMA male low loss cable 36 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug to SMA male low loss cable 36 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C1609/HS2-36 can also be known as a low loss SMB male to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SMA plug cable assembly PE3C1609/HS2-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1609/HS2-36 can also be used in the other direction and will be SMA male to SMB plug cable assembly if the opposite connectivity is required. Low loss SMB male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMA male low loss cable 36 inch length using LMR-195 coax with double heatshrink.

1 : $95.99
25 : $91.19
50 : $86.39
100 : $82.55

PE3C4911-60

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 60 inches. Snap-On BMA Jack to SMA Male Right Angle Cable 60 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly snap-on BMA jack to SMA male right angle cable 60 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to SMA male right angle cable 60 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and right angle SMA cable connection on the other. Our BMA to right angle SMA cable assemblies have a jack gender on end 1 and male on end 2. This BMA to SMA cable is a jack to male coax assembly, PE3C4911-60, can also be known as a BMA female to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. BMA female to SMA plug cable assembly PE3C4911-60 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency BMA jack to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4911-60 can also be used in the other direction and will be right angle SMA male to BMA jack cable assembly if the opposite connectivity is required. BMA female to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to SMA male right angle cable 60 inch length using PE-SR402FLJ coax.

1 : $249.99
25 : $237.49
50 : $224.99

PE3C6331-60

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 60 inches. Outdoor Rated 4.3-10 Female to 4.3-10 Female Low PIM Cable 60 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 4.3-10 female low PIM cable 60 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 4.3-10 female low PIM cable 60 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and TC-SPP250-4310F-LP 4.3-10 cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assemblies have a female gender on end 1 and female on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable is a female to female coax assembly, PE3C6331-60, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-4310F-LP 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-4310F-LP 4.3-10 jack cable assembly PE3C6331-60 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-SPP250-4310F-LP 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-4310F-LP 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 4.3-10 female low PIM cable 60 inch length using SPO-250 coax using Times Microwave parts.

1 : $157.99
25 : $150.09
50 : $142.19
100 : $135.87

PE3M0391-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-P141, RF Cable Type: Coax, RF Cable Specification: PE-P141 datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 Contact Socket to BMA Size 8 Contact Socket Cable 60 Inch Length Using PE-P141 Coax with HeatShrink, LF Solder. The PE3M0391-60 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA socket contact connection on one end and a BMA socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to BMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0391-60 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our BMA socket to BMA socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0391-60 in-series RF cable has 0.8 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMA socket to BMA socket cable assembly is built with PE-P141, which is a flexible coax type. The Pasternack PE3M0391-60 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMA to BMA RF cable are available on our downloadable PDF datasheet. BMA socket to BMA socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to BMA RF cable assembly as per your requirements.

1 : $349.99
10 : $335.99
25 : $321.99
100 : $307.99

PE3W14160

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using RG316 Coax. PE3W14160 is a TNC male to SMA male cable using RG316 coax. This Pasternack TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14160 TNC male to SMA male cable assembly is constructed with RG316 coax.

PE3W16023

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SHV Jack Bulkhead to MCX Plug Cable Using RG316 Coax. PE3W16023 is a SHV jack bulkhead to MCX plug cable using RG316 coax. This Pasternack SHV jack bulkhead to MCX plug cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm MCX for connector 2. Our jack SHV bulkhead to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16023 SHV jack bulkhead to MCX plug cable assembly is constructed with RG316 coax.

PE3W16092LF

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. MCX Jack to SMB Jack Cable Using RG316-DS Coax, LF Solder. PE3W16092LF is a MCX jack to SMB jack cable using RG316-DS coax. This Pasternack MCX jack to SMB jack cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMB for connector 2. Our jack MCX to jack SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16092LF MCX jack to SMB jack cable assembly is constructed with RG316-DS coax.

PE3160/HS

Pasternack Enterprises

TE Connectivity

160655-2

TE Connectivity

FASTON 110 REC 20-15 AWG PTPB Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 15 AWG Wire Size: .51 – 1.65 mm² Mating Tab Width: 2.8 mm Receptacle Uninsulated 20 – 15 AWG .51 – 1.65 mm² | Quick Disconnect | Part Number: 160655-2 | Internal Number: 160655-2 | Alias Number: F49671-000 | TE Connectivity
RoHS : Compliant

1,000 : $0.12
100 : $0.16
10 : $0.19
1 : $0.25

77,150

5-160526-9

TE Connectivity

FF 250 REC 0.5-1.5MM2 TPPB Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 15 AWG Wire Size: .51 – 1.65 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 20 – 15 AWG .51 – 1.65 mm² | Quick Disconnect | Part Number: 5-160526-9 | Internal Number: 5-160526-9 | TE Connectivity
RoHS : Compliant

1,000 : $0.31
100 : $0.41
10 : $0.51
1 : $0.64

25,318

CPF0603B160RE1

TE Connectivity

CPF 0603 160R 0.1% 25PPM 1K RL Resistance Value: 160 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0603 Surface Mount Resistor | 160 Ω Thin Film Precision Resistor .1 % | Part Number: CPF0603B160RE1 | Internal Number: 3-1676481-6 | TE Connectivity
RoHS : Compliant

500 : $0.31
250 : $0.32
100 : $0.33
50 : $0.34
25 : $0.36
10 : $0.37
1 : $0.38

22,140

RR02J160RTB

TE Connectivity

RR02 5% 160R AMMO Resistance Value: 160 Ω Element Type: Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 2 W Through-Hole Resistor | 160 Ω Metal Film Power Resistor 5 % | Part Number: RR02J160RTB | Internal Number: 6-1879352-6 | TE Connectivity
RoHS : Compliant

1,000 : $0.13
500 : $0.14
250 : $0.14
100 : $0.14
50 : $0.15
25 : $0.15
10 : $0.15
1 : $0.16

3,039

2-1761608-5

TE Connectivity

IDC LOW PRO HDR 14P VERT SHT L Connector System: Wire-to-Board Number of Positions: 14 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 14 2.54 mm .1" | Ribbon Cable Connector | Part Number: 2-1761608-5 | Internal Number: 2-1761608-5 | TE Connectivity
RoHS : Compliant

1,000 : $4.87
500 : $5.01
250 : $5.17
100 : $5.34
50 : $5.49
1 : $6.03

2,658

6PCV-16-006

TE Connectivity

6PCV-16-006=6PCV ASSEMBLY Number of Positions: 16 Barrier Strip Style: Tri-Barrier Bottom Termination Type: Printed Circuit Pin Connector System: Wire-to-Board Centerline (Pitch): .375 in Barrier Strip | 16 Tri-Barrier Printed Circuit Pin Wire-to-Board | Part Number: 6PCV-16-006 | Internal Number: 8-1437653-0 | .375" | TE Connectivity
RoHS : Compliant

2,500 : $14.15
1,000 : $14.54
500 : $14.92
250 : $15.3
100 : $15.68
50 : $16.07
25 : $16.45
10 : $16.83
1 : $17.21

1,649

1600798-2

TE Connectivity

STR RCPT ASSY MBXL W/KEYS 2ACP Number of Positions: 2 Connector & Housing Type: Receptacle Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Cable-to-Board Cable-to-Panel Standard Rectangular Connector | 2 Receptacle Housing Crimp | Part Number: 1600798-2 | Internal Number: 1600798-2 | TE Connectivity
RoHS : Compliant

1,000 : $6.69
500 : $6.88
250 : $7.1
100 : $7.34
50 : $7.55
1 : $8.28

1,292

SPSW10160RJ

TE Connectivity

SPS10 160R 5% Resistance Value: 160 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 10 W Wirewound Resistor: Vertical Mount | 160 Ω Wire Wound Power Resistor 5 % | Part Number: SPSW10160RJ | Internal Number: 1623778-7 | TE Connectivity
RoHS : Compliant

500 : $3.23
250 : $3.34
100 : $3.45
50 : $3.56
25 : $3.67
10 : $3.78
1 : $3.89

985

AVH25MSSFEA241604

TE Connectivity

AVH25 FLT SS MT RNG R&G 24V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: Momentary 1 NO & 1 NC Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With Momentary Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH25MSSFEA241604 | Internal Number: 2-2364700-3 | TE Connectivity
RoHS : Compliant

50 : $57.18
25 : $60.55
10 : $63.91
1 : $67.27

T1329160116-000

TE Connectivity

H16A-TG-PG16 Hood & Base Connector Product Type: Hood Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Hood Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1329160116-000 | Internal Number: T1329160116-000 | TE Connectivity
RoHS : Compliant

25 : $17.86
10 : $19.24
1 : $20.61

T1420160000-000

TE Connectivity

H16B-AG-BO Hood & Base Connector Product Type: Base Housing Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1420160000-000 | Internal Number: T1420160000-000 | TE Connectivity
RoHS : Compliant

25 : $19.13
10 : $20.6
1 : $22.07

T1210160116-000

TE Connectivity

H16B-TS-PG16 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1210160116-000 | Internal Number: T1210160116-000 | TE Connectivity
RoHS : Compliant

25 : $17.1
10 : $18.41
1 : $19.73

T1330160129-000

TE Connectivity

H16B-TSH-RO-PG29 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Hood Side Locking | Rectangular Connector Hoods & Base | Part Number: T1330160129-000 | Internal Number: T1330160129-000 | TE Connectivity
RoHS : Compliant

25 : $25.92
10 : $27.91
1 : $29.9

T1220100116-000

TE Connectivity

H10B-TG-PG16 Hood & Base Connector Product Type: Hood Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Hood Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1220100116-000 | Internal Number: T1220100116-000 | TE Connectivity
RoHS : Compliant

25 : $17.12
10 : $18.44
1 : $19.76

FN3288HVIT-160-40-C26-R60

TE Connectivity

FN3288HVIT-160-40-C26-R60 Current Rating: 160 A Input Termination Type: Terminal Block Output Termination Type: Terminal Block Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 760 VAC 3-Phase Filters & Fn3288 Compact High-Performance Emc/rfi Filter For Inverters And Drive System | 160 A Terminal Block DELTA (3 wire + ground) | Part Number: FN3288HVIT-160-40-C26-R60 | Internal Number: 820880-SF | FN3288HVIT-160-40-C26-R60 Current Rating: 160 A Input Termination Type: Terminal Block Output Termination Type: Terminal Block Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 760 VAC 3-Phase Filters & Fn3288 Compact High-Performance Emc/rfi Filter For Inverters And Drive System | 160 A Terminal Block DELTA (3 wire + ground) | Part# FN3288HVIT-160-40-C26-R60
RoHS : Compliant

1 : $2,585.13

Teledyne HiRel

5962-9160401MEA

Teledyne HiRel

MULTIPLEXER, QUAD 2-INPUT, 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9091601B2A

Teledyne HiRel

MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE AND PULL-UP RESISTORS
RoHS : Not Compliant

5962-9160301MEA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN
RoHS : Not Compliant

5962-9091601MSA

Teledyne HiRel

MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE AND PULL-UP RESISTORS
RoHS : Not Compliant

M38510/31603BFA

Teledyne HiRel

LATCH, 8-BIT ADDRESSABLE
RoHS : Not Compliant

M38510/31603BEA

Teledyne HiRel

LATCH, 8-BIT ADDRESSABLE
RoHS : Not Compliant

5962-9581601QXA

Teledyne HiRel

TRANSCEIVER/REGISTER, 16-BIT, WITH 3-STATE INPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9221602MRA

Teledyne HiRel

SHIFT REGISTER, 8-BIT UNIVERSAL, TTL-COMPATIBLE WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9160401M2A

Teledyne HiRel

MULTIPLEXER, QUAD 2-INPUT, 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9221606MSA

Teledyne HiRel

SHIFT REGISTER, 8-BIT UNIVERSAL, TTL-COMPATIBLE WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9160301M2A

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN
RoHS : Not Compliant

5962-9160601MLA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9160601MKA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9221606M2A

Teledyne HiRel

SHIFT REGISTER, 8-BIT UNIVERSAL, TTL-COMPATIBLE WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9091601BSA

Teledyne HiRel

MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE AND PULL-UP RESISTORS
RoHS : Not Compliant

Venkel Ltd.

AGC0603X7R160-333MNP

VENKEL LTD

Auto Grade Capacitor;0603;X7R;16V;0.033uF;�20%
RoHS : Compliant

AGC0805X7R160-105MNE

VENKEL LTD

Auto Grade Capacitor;0805;X7R;16V;1uF;�20%
RoHS : Compliant

LMCI1608-R10KT

VENKEL LTD

Low Value Multilayer Chip Inductor;0603;100nH;�10%
RoHS : Compliant

LMCI1608-R39JT

VENKEL LTD

Low Value Multilayer Chip Inductor;0603;390nH;�5%
RoHS : Compliant

MEHF0207-VC-1600FT

VENKEL LTD

High Frequency MELF;0207;1/2W;�50PPM;160R�1%
RoHS : Not Compliant

MELFC0102-RZ-1600BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�15PPM;160R;�0.1%
RoHS : Compliant

MELFC0102-YC-1602FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�50PPM;16K;�1%
RoHS : Compliant

MELFC0102-YE-1602BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�25PPM;16K;�0.1%
RoHS : Compliant

MELFC0102-YZ-1602CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�15PPM;16K;�0.25%
RoHS : Compliant

MELFC0204-ZK-1602FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�100PPM;16K;�1%
RoHS : Compliant

MELFC0207-XZ-1600BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�15PPM;160R;�0.1%
RoHS : Compliant

MELFM0204-TE-1600FT

VENKEL LTD

MELF Molded Thin Film CR;0204;1/4W;�25PPM;160R;�1%
RoHS : Not Compliant

MELFM0204-TE-3160CT

VENKEL LTD

MELF Molded Thin Film CR;0204;1/4W;�25PPM;316R;�0.25%
RoHS : Not Compliant

MELFM0204-ZE-1600DT

VENKEL LTD

MELF Molded Thin Film CR;0204;2/5W;�25PPM;160R;�0.5%
RoHS : Not Compliant

MELFM0207-VE-1601FT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�25PPM;1.6K;�1%
RoHS : Not Compliant

Waytek, Inc.

AT62-16-0144

Amphenol Sine Systems

Amphenol Sine Systems AT62-16-0144 AT Series female socket terminal is a size 16, gold-plated copper alloy contact for 18-16 gauge wire. Designed for Deutsch DT-compatible AT connector assemblies, it supports sealed crimp terminations where a loose socket contact is required.

10 : $0.3761
50 : $0.3632
100 : $0.3529
200 : $0.34
500 : $0.3297
1,000 : $0.322

18,883

AT60-16-0144

Amphenol Sine Systems

AT Series Gold-Plated,Male Stamped & Formed,Contact (Waytek Disco'd) (4K on Reel)

4,000 : $0.1817
20,000 : $0.1754

16,000

AT60-16-0144

Amphenol Sine Systems

Amphenol Sine Systems AT60-16-0144 A Series male pin terminal is a size 16, gold-plated copper alloy contact for 18-16 gauge wire. Designed as a Deutsch 1060-16-0144 and DT Series drop-in replacement, it supports sealed AT connector assemblies.

10 : $0.259
50 : $0.2518
100 : $0.2411
200 : $0.2358
500 : $0.2286
1,000 : $0.2233

13,094

AT62-16-0144

Amphenol Sine Systems

AT Series Stamped & Formed, Gold-Plated,Female Contact, Size 16,16-18GA, 4K on Reel

4,000 : $0.3314
20,000 : $0.3061

8,000

160-012

AFC Cable Systems Inc

Non-Metallic Electrical Tubing Black 3/8" 100 FT UL LIQUID TIGHT

100 : $0.9533
500 : $0.9005

1,700

7158-3111-60

Yazaki Corp

18-16 GA Yazaki 2.8 Cable Seal

10 : $0.2354
50 : $0.2107
100 : $0.1911
200 : $0.1842
500 : $0.1783
1,000 : $0.1715

1,030

57160 OR 611-016

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #16 Band 1/2" 11/16" TO 1-1/2"

10 : $1.6016
50 : $1.4236
100 : $1.2919
200 : $1.2523
500 : $1.2062
1,000 : $1.1601

904

160-040

AFC Cable Systems Inc

Non-Metallic Electrical Tubing Black 1-1/2" 100 FT UL LIQUID TIGHT

100 : $2.3972
500 : $2.2297

500

C01600V00001012

Amphenol Sine Systems

Amphenol Sine Systems C01600V00001012 protective cap is a plastic cover for ecomate female cable connectors and receptacles. Built for shell size 2, it fits 3- and 6-position connectors to help protect unmated interfaces during storage or service.

1 : $9.53
5 : $8.89
10 : $7.98
50 : $7.52
100 : $6.88
200 : $6.47

200

11-609E

Pollak

6-Way Socket Trailer Connector DIE-CAST POLLAK E-LINE SEE ALSO PN 37664

1 : $10.35
10 : $9.29
50 : $8.56
100 : $8.27
200 : $8.01
500 : $7.8

199

11-604EP

Pollak

6-Way Plug Trailer Connector Die-Cast Pollak Economy Version

1 : $7.37
10 : $6.65
50 : $6.1
100 : $5.89
200 : $5.71
500 : $5.52

640160204

Molex

Molex Ratchet Hand Tool MLX 640160204 REPLACED 427 TYCO 90546-1
RoHS : Compliant

1 : $200.94
10 : $188.46

TT-F3A-160RWL

NASON

Temperature Switch UL CSA 160F SPST No Rising 6" UL3173 3A@ 240 VAC 2A@24VDC

1 : $64.37
5 : $57.5
10 : $53.65
50 : $49.25
100 : $47.05
200 : $44.01

624 1604 3 01 RT

Rennsteig Tools Inc

HES 2.4 (SIZE 12) Regular Wall Crimp Die Tool Delphi 13926169 USE WITH PN 385

1 : $393.88
10 : $369.57

19160-0047

Molex

Wing Lock Wire Connector Blue 14-6 GA
RoHS : Compliant

50 : $0.1483
200 : $0.1368
500 : $0.1253
1,000 : $0.1189

Wuhan P&S

MURS160-E3/5BT

Vishay Intertechnologies

Surface-Mount Ultrafast Plastic Rectifier
RoHS : Compliant

1 : $0.79
100 : $0.27
500 : $0.25
1,000 : $0.24

348,800

MBRA160T3G

onsemi

Surface Mount Schottky Barrier Power Rectifier
RoHS : Compliant

1 : $0.23
100 : $0.15
500 : $0.12
1,000 : $0.11

215,000

NCP114AMX160TCG

onsemi

RoHS : Compliant

1 : $0.11
100 : $0.07
500 : $0.06
1,000 : $0.06

132,000

FGY160T65SPD-F085

onsemi

650V,160A,Field Stop Trench IGBT
RoHS : Compliant

1 : $23.46
100 : $14.98
500 : $12.35
1,000 : $11.35

53,100

NVMFS5A160PLZT1G

onsemi

P-CH Power MOSFET,-60V,-100A,7.7m��
RoHS : Compliant

1 : $3.47
100 : $2.22
500 : $1.83
1,000 : $1.68

36,000

NCP160AMX350TBG

onsemi

250mA,3.5V,LDO for RF and Analog Circuit
RoHS : Compliant

1 : $0.18
100 : $0.12
500 : $0.1
1,000 : $0.09

20,000

SQRS160EP-T1_GE3

Vishay Intertechnologies

N-CHANNEL 60-V (D-S) 175C MOSFET
RoHS : Compliant

1 : $6.36
100 : $2.12
500 : $1.96
1,000 : $1.91

15,000

P6SMB160A-E3/52

Vishay Intertechnologies

Surface-Mount TRANSZORB Transient Voltage Suppressors
RoHS : Compliant

1 : $1.11
100 : $0.37
500 : $0.34
1,000 : $0.34

5,250

IXBH9N160G

Littelfuse Inc

IGBT 1600V 9A
RoHS : Compliant

1 : $19.18
100 : $12.24
500 : $10.1
1,000 : $9.28

5,010

M95160-DWDW4TP/K

STMicroelectronics

Automotive 16-Kbit SPI bus EEPROM with high speed clock
RoHS : Compliant

1 : $0.29
100 : $0.29
500 : $0.29
1,000 : $0.29

4,000

SF1600-TAP

Vishay Intertechnologies

1600V,1A,Ultrafast Avalanche Diode
RoHS : Compliant

1 : $0.61
100 : $0.22
500 : $0.16
1,000 : $0.15

2,500

M95160-RMN6TP

STMicroelectronics

16K Serial SPI EEPROM with Positive Clock Strobe
RoHS : Compliant

1 : $0.21
100 : $0.2
500 : $0.2
1,000 : $0.18

2,500

VOM160RT

Vishay Intertechnologies

Phototriac Output Optocoupler Non-Zero Crossing, 0.5 kV/?s dV/dt, 600 V
RoHS : Compliant

1 : $2.84
100 : $0.95
500 : $0.88
1,000 : $0.85

2,000

71600-026LF

Amphenol FCi

IDC Receptacle,Double row,26 P,2.54mm
RoHS : Compliant

1 : $1.4
100 : $1.36
500 : $1.33
1,000 : $1.3

1,080

STEVAL-MKI160V1

STMicroelectronics

LSM6DS3 Adapter Board

1 : $18.31
100 : $18.31
500 : $18.31
1,000 : $18.31

160CCNSWNTZCWC 販売店

リンク URL