 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
1622-A5-RV 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 Maritex | 3403.0162.24 | Schurter Electronic Components | SMD fuse; time-lag T; 400mA; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C RoHS : Compliant |
| 12,000 | |
SN74LVTH162245DGGR | Texas Instruments | Buffers/Drivers/Transceivers; SN74LVTH162245DGGR; TEXAS INSTRUMENTS; 48; 3.6 V; 2.7 V; 2.8 ns RoHS : Compliant |
| 3,312 | ||
OPA1622IDRCR | Texas Instruments | Multimedia Amplifiers; OPA1622IDRCR; TEXAS INSTRUMENTS; 10; 1 mm; 3 mm; 3 mm RoHS : Compliant |
| 2,937 | ||
| CF16221V0T0-LF | Cvilux Corporation | Non-ZIF connector for FFC/FPC; pitch 1.00mm; 22-contacts; THT; top entry |
| 2,577 | ||
| C16226_STRADELLA-8-HV-ME | LEDIL | Lens for LED high power; mid power; angle: asymmetric; Number of LEDs: 8; Dimensions: 50x50mm; Height: 5.5mm; meterial: PMMA; Fastening: pin; screw |
| 2,364 | ||
| 3413.0216.22 | Schurter Electronic Components | SMD fuse; quick-acting F; 1A; 32V AC/63V DC; 3.2�1.6�0.6mm; -55�C to +125�C RoHS : Compliant |
| 1,000 | ||
| RNP18-PK1016-222K | RDA Microelectronics | Inductor: wire; THT; 2200uH; 0.65A; 2.5R; 11.5x17.5mm; 10% |
| 100 | ||
SN74LVCR162245DL | Texas Instruments | Buffers/Drivers/Transceivers; SN74LVCR162245DL; TEXAS INSTRUMENTS; 48; 2.7 V; 3.6 V; 8.5 ns RoHS : Compliant |
| 44 | ||
| AD16-22HS/B/24V | Onpow | Signal lamp; 22mm; screw terminals; plastic; yellow full illumination; IP65 |
| 30 | ||
| SW-GQ1622DY6-NL-JZ-HB | HBAN | Push button switch; bistable; 16mm; solder terminals; nickled; dot blue illumination; IP67 |
| 11 | ||
| SW-GQ1622DR6-NL-JZ-HB | HBAN | Push button switch; bistable; 16mm; solder terminals; nickled; dot blue illumination; IP67 |
| 2 | ||
| AD16-22M/24V | Onpow | Buzzer; 22mm; screw terminals; plastic; IP40 |
| 1 | ||
 Pasternack Enterprises US | PE1622 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: 2.92mm, DC Port Connector Series: Pin, Minimum Frequency: 500 MHz, Maximum Frequency: 40 GHz, RF Port Maximum VSWR: 2:1, Maximum Voltage: 50 Volts, Maximum DC Current: 1,000 mA. 500 MHz to 40 GHz 2.92mm Bias Tee Rated to 1000 mA and 50 Volts DC. PE1622 bias tee (also called bias T) has an 2.92mm connector RF port that is female gender. This Pasternack female 2.92mm bias tee design is rated for a minimum frequency of 500 MHz and a maximum frequency of 40 GHz. Our RF coaxial bias tee has a pin DC port connector with a female gender. This 2.92mm bias tee / T is rated for a max. DC voltage of 50 Volts and a max. current of 1,000 mA. The PE1622 bias T with 2.92mm connector series for RF port is designed with a maximum VSWR of 2:1. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.92mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. |
| 5 | |
| PE3W01622LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using PE-P195 Coax with HeatShrink, LF Solder. PE3W01622LF/HS is a N male right angle to N male cable using PE-P195 coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01622LF/HS N male right angle to N male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3C2162-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to N Female Bulkhead Low Loss Cable 200 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE3C2162-200CM, can also be known as a low loss SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C2162-200CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2162-200CM can also be used in the other direction and will be N type female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3W16229 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to Reverse Polarity SMA Female Bulkhead Cable Using LMR-LW195 Coax. PE3W16229 is a reverse polarity SMA male to reverse polarity SMA female bulkhead cable using LMR-LW195 coax. This Pasternack reverse polarity SMA male to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male SMA to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16229 SMA reverse polarity male to SMA reverse polarity female bulkhead cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W16223 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. SMA Male to 2.4mm Male Cable Using PE-SR405AL Coax. PE3W16223 is a SMA male to 2.4mm male cable using PE-SR405AL coax. This Pasternack SMA male to 2.4mm male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 2.4mm for connector 2. Our male SMA to male 2.4mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W16223 SMA male to 2.4mm male cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W16224LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using RG174 Coax with HeatShrink, LF Solder. PE3W16224LF/HS is a N male right angle to N male right angle cable using RG174 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16224LF/HS N male right angle to N male right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W16221 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to Water Blue FAKRA Jack Cable Using LMR-100 Coax. PE3W16221 is a MCX plug right angle to FAKRA jack cable using LMR-100A coax. This Pasternack MCX plug right angle to FAKRA jack cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm FAKRA for connector 2. MCX right angle to FAKRA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16221 MCX plug right angle to FAKRA jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE34162-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 24 inches. BNC Male to BNC Male Cable 24 Inch Length Using PE-SR405AL Coax., Radio frequency assembly BNC male to BNC male cable 24 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 24 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34162-24, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34162-24 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 24 inch length using PE-SR405AL coax. |
| 0 | ||
| PE3W16222/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm. SMA Male to N Male Cable Using TCOM-240 Coax with HeatShrink. PE3W16222/HS is a SMA male to N male cable using TCOM-240 coax. This Pasternack SMA male to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16222/HS SMA male to N male cable assembly is constructed with TCOM-240 coax. | 0 | |||
| PE3W16227 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to Reverse Polarity SMA Female Bulkhead Cable Using LMR-LW195 Coax. PE3W16227 is a reverse polarity SMA male right angle to reverse polarity SMA female bulkhead cable using LMR-LW195 coax. This Pasternack reverse polarity SMA male right angle to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16227 SMA reverse polarity male right angle to SMA reverse polarity female bulkhead cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W16224/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using RG174 Coax with HeatShrink. PE3W16224/HS is a N male right angle to N male right angle cable using RG174 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16224/HS N male right angle to N male right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W16220LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Jack to Black FAKRA Jack Cable Using LMR-100 Coax, LF Solder. PE3W16220LF is a MCX jack to FAKRA jack cable using LMR-100A coax. This Pasternack MCX jack to FAKRA jack cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm FAKRA for connector 2. Our jack MCX to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16220LF MCX jack to FAKRA jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W01622/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using PE-P195 Coax with HeatShrink. PE3W01622/HS is a N male right angle to N male cable using PE-P195 coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01622/HS N male right angle to N male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3W16224 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using RG174 Coax. PE3W16224 is a N male right angle to N male right angle cable using RG174 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16224 N male right angle to N male right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W16225 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Bulkhead Cable Using LMR-LW195 Coax. PE3W16225 is a SMA male right angle to SMA female bulkhead cable using LMR-LW195 coax. This Pasternack SMA male right angle to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16225 SMA male right angle to SMA female bulkhead cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 Relay Specialties | TR-51622-10 | Macromatic Industrial Controls Inc | Time Delay Relay; 1.8...180 s Off Delay; 120V AC/DC; 2C DPDT Plug In; Socketable |
| 5 | |
| TR-51622-14 | Macromatic Industrial Controls Inc | Time Delay Relay; 9 s...15 min Off Delay; 120V AC/DC; 2C DPDT Plug In; Socketable |
| 1 | ||
 Venkel Ltd. | HPTF0805-TE-1622CT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�25PPM;16.2K;�0.25% RoHS : Compliant | 0 | ||
| HPTF1210-UN-1622FT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�10PPM;16.2K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-XC-1622BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;16.2K;�0.1% RoHS : Compliant | 0 | |||
| MELFM0204-TE-1622CT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�25PPM;16.2K;�0.25% RoHS : Not Compliant | 0 | |||
| HPTF1206-TP-1622AT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�5PPM;16.2K;�0.05% RoHS : Compliant | 0 | |||
| HPTF2010-UP-1622DT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;16.2K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-VC-1622FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;16.2K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VE-1622BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;16.2K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-VZ-1622CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�15PPM;16.2K;�0.25% RoHS : Compliant | 0 | |||
| MELFM0207-XC-1622BT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�50PPM;16.2K;�0.1% RoHS : Not Compliant | 0 | |||
| MELFM0207-VE-1622FT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�25PPM;16.2K;�1% RoHS : Not Compliant | 0 | |||
| PWCR0805-VK-1622FT | VENKEL LTD | Pulse Withstanding CR;0805;1/2W;�100PPM;16.2K;�1% RoHS : Compliant | 0 | |||
| PWCR2010-XK-1622FT | VENKEL LTD | Pulse Withstanding CR;2010;1W;�100PPM;16.2K;�1% RoHS : Compliant | 0 | |||
| CR0805-10W-1622DT | VENKEL LTD | Chip Resistor;0805;1/10W;16.2K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1622FT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;16.2K;�1% RoHS : Compliant | 0 | |||
 Waytek, Inc. | 12162280 | Aptiv PLC | Aptiv 12162280 Metri-Pack 150.2 Series sealed connector is a 3-way female connector rated to 14A max. It is suited for space-limited in-line connections and low-energy electronic circuits, with a pull-to-seat design for high-demand sealed applications. RoHS : Compliant |
| 2,283 | |
| 12162279 | Aptiv PLC | Aptiv 12162279 Metri-Pack 150.2 Series sealed connector is a 3-way female connector rated to 14A max. Designed for space-limited in-line connections and low-energy electronic circuits, it uses a pull-to-seat connection and is made for high-demand sealed applications. |
| 2,202 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand