| データシートサーチシステム |
|
1812B-D8-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() Coilcraft Direct | 1812FS-154JRC | Coilcraft Inc | Inductor, shielded, 5% tol, SMT, RoHS RoHS : Compliant |
| 2,749 | |
| 1812FS-105JLC | Coilcraft Inc | Inductor, shielded, 5% tol, SMT, RoHS RoHS : Compliant |
| 980 | ||
| 1812FS-472JRC | Coilcraft Inc | Inductor, shielded, 5% tol, SMT, RoHS RoHS : Compliant |
| 828 | ||
| 1812PS-393JLC | Coilcraft Inc | Power inductor, shielded, 5% tol, SMT, RoHS RoHS : Compliant |
| 480 | ||
| 1812PS-474JLC | Coilcraft Inc | Power inductor, shielded, 5% tol, SMT, RoHS RoHS : Compliant |
| 25 | ||
| CMT1-.8-12L | Coilcraft Inc | Common mode choke, toroid, RoHS RoHS : Compliant |
| 6 | ||
| 1812FS-102JRC | Coilcraft Inc | Inductor, shielded, 5% tol, SMT, RoHS RoHS : Compliant |
| 6 | ||
| 1812CS-223XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
| 1812DPS-102MLD | Coilcraft Inc | Power inductor, coupled, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1812FS-224KLC | Coilcraft Inc | Inductor, shielded, 10% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1812PS-104JLC | Coilcraft Inc | Power inductor, shielded, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1812PS-153JRC | Coilcraft Inc | Power inductor, shielded, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1812PS-522JRC | Coilcraft Inc | Power inductor, shielded, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1812CS-103XGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
| 1812CS-683XJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | CC1812KKX7R9BB105![]() | YAGEO Corporation | RoHS : Compliant | 8,000 | ||
| CC1812KKX7REBB102 | NXP Semiconductors | 1,201 | ||||
| 1812Y1K00473KST | Keystone Electronics Corp | 973 | ||||
| LS1812N222K302NXTM | Keystone Electronics Corp | 801 | ||||
| CC1812KKX7R9BB474 | NXP Semiconductors | 17 | ||||
![]() ComSIT USA | 1812B104M501LT![]() | Walsin Technology Corporation | MULTILAYER CERAMIC CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 500V, 20% +Tol, 20% -Tol, X7R, 15% TC, 0.1uF, Surface Mount, 1812 RoHS : Not Compliant | 28,000 | ||
| C1812X103KGRAUTO | KEMET Corporation | Electronic Component RoHS : Compliant | 10,000 | |||
| 49SSMD1431818125050E | CompoTEK | Electronic Component RoHS : Compliant | 5,000 | |||
| ST0D1812PUR | STMicroelectronics | Power management IC, STM RoHS : Compliant | 3,000 | |||
1812HA221JAT1A![]() | Kyocera AVX Components | HIGH VOLTAGE CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 3000V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.00022uF, Surface Mount, 1812 RoHS : Compliant | 2,940 | |||
1812J5000223KXT![]() | Syfer Technology | SURFACE MOUNT MLC CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 500V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.022uF, Surface Mount, 1812 RoHS : Compliant | 2,512 | |||
1812HC272KAZ1A![]() | Kyocera AVX Components | HIGH VOLTAGE MLC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 3000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.0027uF, Surface Mount, 1812 RoHS : Compliant | 2,000 | |||
1812N120J202CT![]() | Walsin Technology Corporation | Ceramic Capacitor, Multilayer, Ceramic, 2000V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.000012uF, Surface Mount, 1812 RoHS : Compliant | 2,000 | |||
| VJ1812Y684KXXAT | Vishay Intertechnologies | Ceramic Capacitor, Multilayer, Ceramic, 25V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.68uF, Surface Mount, 1812 RoHS : Compliant | 2,000 | |||
ISL9R18120S3ST![]() | Fairchild Semiconductor Corporation | 18 A, 1200 V, STEALTH DIODE Rectifier Diode, 1 Phase, 1 Element, 18A, 1200V V(RRM), Silicon, TO-263AB RoHS : Compliant | 1,600 | |||
1812B104M501CT![]() | Walsin Technology Corporation | MULTILAYER CERAMIC CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 500V, 20% +Tol, 20% -Tol, X7R, 15% TC, 0.1uF, Surface Mount, 1812 RoHS : Compliant | 1,000 | |||
| TCC1812X7R104K631GT | Chaozhou Three-circle (group) co Ltd | Electronic Component RoHS : Compliant | 1,000 | |||
1812PC222KAT1A![]() | Kyocera AVX Components | Ceramic Capacitor, Multilayer, Ceramic, 250V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.0022uF, Surface Mount, 1812 RoHS : Compliant | 1,000 | |||
| UPD78F1812GAA2GAMGJM | Renesas Electronics Corporation | 16-Bit Single-Chip Microcontroller Microcontroller, 16-Bit, FLASH, UPD78K0R CPU, 24MHz, CMOS, PQFP48 RoHS : Compliant | 29 | |||
C1812C225M1RACTU![]() | KEMET Corporation | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 100V, 20% +Tol, 20% -Tol, X7R, 15% TC, 2.2uF, Surface Mount, 1812 RoHS : Not Compliant | 5 | |||
![]() Powell Electronics | 1-1318120-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 16,728 | |
| D-181-2222-90/9 | TE Connectivity | Connectors RoHS : Not Compliant |
| 386 | ||
| ZW-18-12-G-D-550-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 201 | ||
| GTC08-18-12P-B30-LC | Amphenol Corporation | CONNECTOR |
| 98 | ||
| ACC02A18-12P-025 | Amphenol Corporation | CONNECTOR |
| 98 | ||
| ACC02A18-12PZ-025 | Amphenol Corporation | CONNECTOR |
| 98 | ||
| DW-18-12-G-S-600 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 90 | ||
| EW-18-12-G-S-435 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 90 | ||
| DW-18-12-T-D-600 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 84 | ||
| 1218125-3 | TE Connectivity | 25 POS,ASSY,PLUG,LOW PROF,109 RoHS : Not Compliant |
| 51 | ||
| 75-190218-12P | Amphenol Corporation | CONNECTOR |
| 50 | ||
| ACC06AF18-12P-025-B30 | Amphenol Corporation | CONNECTOR |
| 49 | ||
| ESQ-118-12-G-S | Samtec Inc | .100 PC104 Elevated Skt Strip RoHS : Compliant |
| 30 | ||
| 75-68118-12S | Amphenol Corporation | CONNECTOR |
| 2 | ||
| GTC00-18-12P | Amphenol Corporation | CONNECTOR |
| 1 | ||
![]() PUI | R1812-075-33-R | 1,500 | ||||
![]() Richardson RFPD | C1812C104JAGACAUTO | KEMET Corporation | Cap Ceramic 0.1uF 250V C0G 5% Pad SMD 1812 125C Au RoHS : Compliant | 0 | ||
| R411812000 | Radiall | Fixed Coaxial Attenuators 15GHz 11dB RoHS : Compliant |
| 0 | ||
| R412418124 | Radiall | Attenuator 3GHz RoHS : Compliant |
| 0 | ||
| R411812122 | Radiall | Attenuator 26.5GHz 12dB RoHS : Compliant | 0 | |||
| 570BAB001812DGR | Skyworks Solutions Inc | 570BAB001812DGR RoHS : Compliant |
| 0 | ||
C1812C104KDRACAUTO![]() | KEMET Corporation | Cap Ceramic 0.1uF 1000V X7R 10% Pad SMD 1812 125C RoHS : Compliant | 0 | |||
| AISM-1812-102K-T | Abracon Corporation | Inductor RF Molded Wirewound 1000uH 10% 252KHz 20Q RoHS : Compliant | 0 | |||
| R412718124 | Radiall | Attenuator 6GHz RoHS : Not Compliant |
| 0 | ||
| PTS181260V014 | Eaton Corporation | PTC Resettable Fuse 0.14A(hold) 0.34A(trip) 60VDC RoHS : Compliant | 0 | |||
| R411818124 | Radiall | Attenuator 6GHz RoHS : Compliant |
| 0 | ||
| R411818121 | Radiall | Attenuator 18GHz RoHS : Compliant |
| 0 | ||
| R411818122 | Radiall | Fixed Coax Attenuatr RoHS : Compliant | 0 | |||
| LT1812IS6#TRMPBF | Analog Devices Inc | Op Amp Single High Speed Amplifier ±6.3V/12.6V Aut RoHS : Compliant |
| 0 | ||
| 034-1118-12G | Amphenol Corporation | Conn HD-BNC 0Hz to 18GHz 75Ohm Crimp RA Cable Moun RoHS : Compliant |
| 0 | ||
| PTS181230V020 | Eaton Corporation | PTC Resettable Fuse 0.2A(hold) 0.4A(trip) 30VDC 10 RoHS : Compliant | 0 | |||
![]() Rutronik | 02181.25MXP | Littelfuse Inc | 1.25A 250V slow 5x20 glass IEC RoHS : Compliant |
| 10,000 | |
| VJ1812A101JXGTW1HV | Vishay Intertechnologies | KC 100pF 1812 5% 1000V NP0 RoHS : Compliant |
| 2,000 | ||
| VJ1812A101JXHTW1HV | Vishay Intertechnologies | KC 100pF 1812 5% 3000V NP0 RoHS : Compliant |
| 2,000 | ||
| VJ1812A102JXGTW1HV | Vishay Intertechnologies | KC 1,0nF 1812 5% 1000V NP0 RoHS : Compliant |
| 2,000 | ||
| VJ1812A102KXGTW1HV | Vishay Intertechnologies | KC 1,0nF 1812 10% 1000V NP0 RoHS : Compliant |
| 2,000 | ||
| VJ1812A221KXFTW1HV | Vishay Intertechnologies | KC 220pF 1812 10% 2000V NP0 RoHS : Compliant |
| 2,000 | ||
| VJ1812Y152KXFTW1HV | Vishay Intertechnologies | KC 1,5nF 1812 10% 2000V X7R RoHS : Compliant |
| 2,000 | ||
| PTS181216V050 | Eaton Electronics | 0.5A resettable PTC 16V 1812 RoHS : Compliant |
| 2,000 | ||
| 0218.125MXP | Littelfuse Inc | 125mA 250V slow 5x20 glass IEC RoHS : Compliant |
| 2,000 | ||
| SMD1812B014TF | YAGEO Corporation | 140mA 60V 1812 resettable fuse RoHS : Compliant |
| 1,500 | ||
18121C105KAT2A![]() | Kyocera AVX Components | KC 1,0µF 1812 10% 100V X7R RoHS : Compliant |
| 1,000 | ||
18121C225KAT2A![]() | Kyocera AVX Components | KC 2,2µF 1812 10% 100V X7R RoHS : Compliant |
| 1,000 | ||
18125C105MAT2A![]() | Kyocera AVX Components | KC 1,0µF 1812 20% 50V X7R RoHS : Compliant |
| 1,000 | ||
| SMD1812B020TF | YAGEO Corporation | 200mA 30V 1812 resettable fuse RoHS : Compliant |
| 10 | ||
| NJG1812ME4-TE1 | Nisshinbo Micro Devices | DPDT Switch GaAs MMIC QFN12 SMD RoHS : Compliant |
| 6 | ||
![]() Chip 1 Exchange | 1812LS474XJBC | INSTOCK | 5,946 | |||
| CR181243FM | INSTOCK | 3,642 | ||||
| HI1812T800R-00 | STW | INSTOCK | 2,483 | |||
| C1812C472KDRAC | INSTOCK | 2,000 | ||||
| IMC-1812 | INSTOCK | 1,912 | ||||
| 1812CA471KAT | Kyocera AVX Components | INSTOCK | 1,438 | |||
C1812C334K5RAC7800![]() | KEMET Corporation | INSTOCK RoHS : Compliant | 1,000 | |||
NMC1812NPO103J50TRPLP![]() | NIC Components Corp | INSTOCK RoHS : Not Compliant | 961 | |||
1812Y3K00150JCT![]() | Syfer Technology | INSTOCK RoHS : Compliant | 895 | |||
| 1812LS-393XJBC | Coilcraft Inc | INSTOCK RoHS : Not Compliant | 800 | |||
| CR18-1243FM | INSTOCK | 563 | ||||
| 1812LS-684XKBC | INSTOCK | 529 | ||||
C1812V334KCRACTU![]() | KEMET Corporation | INSTOCK RoHS : Compliant | 57 | |||
| M15FAH001812VDC | FEME | INSTOCK | 37 | |||
| ISC1812-68UH10% | INSTOCK | 30 | ||||
![]() Avnet Asia | C1812C104J2GACAUTO![]() | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.1 uF, 200 V, 1812 [4532 Metric], ? 5%, C0G / NP0, C Series (Alt: C1812C104J2GACAUTO) RoHS : Compliant |
| 5,000 | |
C1812V334KCRACTU![]() | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.33 uF, 500 V, 1812 [4532 Metric], ? 10%, X7R (Alt: C1812V334KCRACTU) RoHS : Compliant |
| 2,500 | ||
18123D106MAT2A![]() | Kyocera AVX Components | (Alt: 18123D106MAT2A) RoHS : Compliant | 2,000 | |||
18121C104KAT2A![]() | Kyocera AVX Components | (Alt: 18121C104KAT2A) RoHS : Compliant | 2,000 | |||
1812GC472KAT1A![]() | Kyocera AVX Components | SMD Multilayer Ceramic Capacitor, 4700 pF, 2 kV, 1812 [4532 Metric], ? 10%, X7R, 4.5 mm, 3.2 mm (Alt: 1812GC472KAT1A) RoHS : Compliant | 1,000 | |||
18121C474KAT2A![]() | Kyocera AVX Components | SMD Multilayer Ceramic Capacitor, 0.47 uF, 100 V, 1812 [4532 Metric], ? 10%, X7R, 4.5 mm, 3.2 mm (Alt: 18121C474KAT2A) RoHS : Compliant | 1,000 | |||
1812CC104KAT2A![]() | Kyocera AVX Components | (Alt: 1812CC104KAT2A) RoHS : Compliant | 0 | |||
| 1812HA101KAT2A | Kyocera AVX Components | SMD Multilayer Ceramic Capacitor, 100 pF, 3 kV, 1812 [4532 Metric], ? 10%, C0G / NP0, 4.5 mm, 3.2 mm (Alt: 1812HA101KAT2A) RoHS : Compliant | 0 | |||
| EDC18-125-3P | Eaton Corporation | (Alt: EDC18-125-3P) RoHS : Compliant | 0 | |||
| VJ1812Y105KXBAT4X | Vishay Intertechnologies | SMD Multilayer Ceramic Capacitor, 1 ?F, 100 V, 1812 [4532 Metric], ? 10%, X7R, VJ OMD Series, 4.5 mm (Alt: VJ1812Y105KXBAT4X) RoHS : Compliant | 0 | |||
| C1812V334KCRAC7800 | KEMET Corporation | (Alt: C1812V334KCRAC7800) RoHS : Compliant | 0 | |||
18121C105MAT2A![]() | Kyocera AVX Components | (Alt: 18121C105MAT2A) RoHS : Compliant | 0 | |||
18122C104KAT2A![]() | Kyocera AVX Components | SMD Multilayer Ceramic Capacitor, 0.1 uF, 200 V, 1812 [4532 Metric], ? 10%, X7R, 4.5 mm, 3.2 mm (Alt: 18122C104KAT2A) RoHS : Compliant | 0 | |||
| 1812AA101KAT2A | Kyocera AVX Components | (Alt: 1812AA101KAT2A) RoHS : Compliant | 0 | |||
| ISC1812ER100K | Vishay Intertechnologies | ISC-1812 10 10% ER E3 (Alt: ISC1812ER100K) RoHS : Compliant | 0 | |||
![]() Avnet Silica | PIC16F18125-E/7NVAO | Microchip Technology Inc | 14KB Flash 1KB RAM 256B EEPROM 12b Diff ADCC 2x16bit dual PWM 2x8bit DAC (Alt: PIC16F18125-E/7NVAO) RoHS : Compliant | 273 | ||
| MD1812K6-G | Microchip Technology Inc | MOSFET DRVR 2A 4OUT HiLo Side InvNonInv 16Pin QFN TR (Alt: MD1812K6-G) RoHS : Compliant | 0 | |||
| EMC1812T-AE/RW | Microchip Technology Inc | (Alt: EMC1812T-AE/RW) RoHS : Compliant | 0 | |||
| PIC16F18124-I/ST | Microchip Technology Inc | (Alt: PIC16F18124-I/ST) RoHS : Compliant | 0 | |||
| MCP1812AT-028/TT | Microchip Technology Inc | LDO Regulator Pos 28V 300mA 3Pin SOT23 TR (Alt: MCP1812AT-028/TT) RoHS : Compliant | 0 | |||
| PIC16F18126T-I/7N | Microchip Technology Inc | (Alt: PIC16F18126T-I/7N) RoHS : Compliant | 0 | |||
| L2C5-40801812G2300 | Lumileds | (Alt: L2C5-40801812G2300) RoHS : Compliant | 0 | |||
| L2C5-40801812F2300 | Lumileds | (Alt: L2C5-40801812F2300) RoHS : Compliant | 0 | |||
| L2C5-30801812F2300 | Lumileds | (Alt: L2C5-30801812F2300) RoHS : Compliant | 0 | |||
| L2C5-30801812G2300 | Lumileds | (Alt: L2C5-30801812G2300) RoHS : Compliant | 0 | |||
| L2C5-40701812F2300 | Lumileds | (Alt: L2C5-40701812F2300) RoHS : Compliant | 0 | |||
| MCS1812GY-5-030-BA-Z | Monolithic Power Systems | Isolated Coreless 5A to 100A Linear HallEffect Current Sensor with Fast OCD (Alt: MCS1812GY-5-030-BA-Z) RoHS : Compliant | 0 | |||
| MCS1812GY-3-050-BA-Z | Monolithic Power Systems | SOIC16 Isolated Coreless 5A to 100A Linear HallEffect Current Sensor with Fast OCD (Alt: MCS1812GY-3-050-BA-Z) RoHS : Compliant | 0 | |||
| MCS1812GY-5-030-BA-P | Monolithic Power Systems | Isolated Coreless 5A to 100A Linear HallEffect Current Sensor with Fast OCD (Alt: MCS1812GY-5-030-BA-P) RoHS : Compliant | 0 | |||
| ALVIUM G1-812 UV C-MOUNT | Allied Vision Technologies GmbH | Sony IMX487 UV 23 2856x2912 CMOS GS CMount closed 14fps GigE 29x29x41mm 65g (Alt: 18363) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AISM-1812H-2R7K-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| EA2532LA18-12.000M TR | Abracon Corporation | CRYSTAL, SMD, 2.5x3.2, 15/30, 18pF, 12.000MHz, -40+85C |
| 0 | ||
| AISM-1812-R39M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812H-8R2K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-3R9K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-820K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812H-330K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ILCX13-FF5F18-12.000 MHZ | Abracon Corporation |
| 0 | |||
| AISM-1812H-121K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1812H-220-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-102K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-391K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812H-270K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-R22M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-101K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() Chip-Germany GmbH | 4,18121E+11 | Wurth Elektronik | 322 | |||
| HNP18-120 | HN Electronic Components GmbH & Co Kg | 15 | ||||
![]() Component Electronics, Inc | IMC-1812-1UH-10%-R13 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 5,600 | |
| RMC1/8-120R-5% | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 4,900 | ||
| RMC18-1211FT | Megastar Electroniques | IN STOCK SHIP TODAY |
| 3,000 | ||
| 18125C394KAT060M | Kyocera AVX Components | IN STOCK SHIP TODAY |
| 1,250 | ||
| 18125E474MAT1A | Kyocera AVX Components | IN STOCK SHIP TODAY |
| 1,200 | ||
18125E105MAT2A![]() | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,024 | ||
C1812X7R500-105KNE![]() | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant | 800 | |||
| 1812N821J202NT | Novacap | IN STOCK SHIP TODAY | 730 | |||
VJ1812Y274MXAAT![]() | Vishay Vitramon | IN STOCK SHIP TODAY RoHS : Compliant |
| 700 | ||
| IMC-1812-10UH-10% | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 700 | ||
| CTCB1812-125S | Central Technologies | IN STOCK SHIP TODAY | 400 | |||
| 1812WBT-5LB | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 363 | ||
| LCM1812-1R0K-TR | ISI | IN STOCK SHIP TODAY | 148 | |||
C1812C271JZGACTU![]() | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 18 | ||
| 1812B224K251N | Novacap | IN STOCK SHIP TODAY | 10 | |||
![]() DB Roberts | 1812 | Heyco | RDD 200-2-90 BLACK | 0 | ||
| E3-121-1812 | Southco | E3-121-1812 | 0 | |||
| HV9018120A | Essentra Components | HOOK V-90 STYLESPRING STEEL | 0 | |||
| FHD-0518-12ZI | PennEngineering (PEM) | STUD, FLUSH, STEEL; DOG POINT 5/16-18THREAD | 0 | |||
| FLEX18-12026 | SHEREX FASTENING SO | 0 | ||||
| HFHDS-0518-12 | PennEngineering (PEM) | STUD, HVY HEAD, STEEL W/DOG PT 5/16-18THREAD | 0 | |||
| FLEX18-12011 | SHEREX FASTENING SO | 0 | ||||
| FLEX18-12048 | SHEREX FASTENING SO | 0 | ||||
| FLEX18-12093 | SHEREX FASTENING SO | 0 | ||||
| 47-63-181-25 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-93-181-20 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| STKC-0518-12 | Standard Insert | Uniform knurl diameter reduces the risk of sink marks.Available in varying lengths for injection molding assemblies.Aluminum inserts ideal for light weight designs.Aluminum and stainless steel inserts offer lead-free alternative. | 0 | |||
| 18123B-S-0632 | RAF Electronic Hardware | 0 | ||||
| 1818-1224-S-12 | RAF Electronic Hardware | 0 | ||||
| 018120300001 | Essentra Components | 0 | ||||
![]() EBV Elektronik | F18127_DAISY-MINI-WWW-D | LEDIL | Linear Lens 65 PMMA 2795 X 21 X 133mm Milky Box (Alt: F18127_DAISY-MINI-WWW-D) RoHS : Compliant | 96 | ||
STM1812MWX7F![]() | STMicroelectronics | Processor Supervisor 437V 3V33V5V 3Pin SOT23 TR (Alt: STM1812MWX7F) RoHS : Compliant | 0 | |||
| EMC1812T-AE/RW | Microchip Technology Inc | (Alt: EMC1812T-AE/RW) RoHS : Compliant | 0 | |||
| EMC1812T-1E/RW | Microchip Technology Inc | (Alt: EMC1812T-1E/RW) RoHS : Compliant | 0 | |||
LPC1812JET100E![]() | NXP Semiconductors | ARM MCU LPC Family LPC1800 Series Microcontrollers ARM CortexM3 32 bit 180 MHz 512 KB (Alt: LPC1812JET100E) RoHS : Compliant | 0 | |||
| PIC16F18124-I/ST | Microchip Technology Inc | (Alt: PIC16F18124-I/ST) RoHS : Compliant | 0 | |||
| PIC16F18125-I/7N | Microchip Technology Inc | (Alt: PIC16F18125-I/7N) RoHS : Compliant | 0 | |||
| PIC16F18124-I/SL | Microchip Technology Inc | (Alt: PIC16F18124-I/SL) RoHS : Compliant | 0 | |||
| PIC16F18126-E/7N | Microchip Technology Inc | (Alt: PIC16F18126-E/7N) RoHS : Compliant | 0 | |||
| MCP1812AT-012/7QX | Microchip Technology Inc | (Alt: MCP1812AT-012/7QX) RoHS : Compliant | 0 | |||
| PIC16F18125T-I/7N | Microchip Technology Inc | (Alt: PIC16F18125T-I/7N) RoHS : Compliant | 0 | |||
| MCP1812AT-040/7QX | Microchip Technology Inc | (Alt: MCP1812AT-040/7QX) RoHS : Compliant | 0 | |||
| MCP1812AT-018/7QX | Microchip Technology Inc | (Alt: MCP1812AT-018/7QX) RoHS : Compliant | 0 | |||
| BXEP-50C-181-24B-00-00-0 | Bridgelux Inc | Full Flux and Full Vf Bins (Alt: BXEP-50C-181-24B-00-00-0) RoHS : Compliant | 0 | |||
| BXEP-40G-181-24B-00-00-0 | Bridgelux Inc | Full Flux and Full Vf Bins (Alt: BXEP-40G-181-24B-00-00-0) RoHS : Compliant | 0 | |||
![]() ECCO | 97-3106A-18-12SW | Amphenol Industrial Operations |
| 101 | ||
| 97-3102A-18-12S(621) | Amphenol Industrial Operations |
| 101 | |||
| 97-3102A-18-12SY | Amphenol Industrial Operations |
| 101 | |||
| 97-3100A-18-12SW | Amphenol Industrial Operations |
| 101 | |||
| MS3100A18-12SW | Amphenol Industrial Operations |
| 101 | |||
| 97-3102A-18-12S | Amphenol Industrial Operations |
| 101 | |||
| MS3100A18-12S | Amphenol Industrial Operations |
| 101 | |||
| 97-3106A-18-12S(417) | Amphenol Industrial Operations |
| 101 | |||
| 97-418-12P | Amphenol Industrial Operations |
| 100 | |||
| 97-4106A-18-12P(621) | Amphenol Industrial Operations |
| 100 | |||
| 97-3101A-18-12S(621) | Amphenol Industrial Operations |
| 50 | |||
| 97-4107A-18-12P(662) | Amphenol Industrial Operations |
| 34 | |||
| 97-3101A-18-12P(946) | Amphenol Industrial Operations |
| 31 | |||
| 97-3106A-18-12P(946) | Amphenol Industrial Operations |
| 31 | |||
| MS3101A18-12S | Amphenol Industrial Operations |
| 10 | |||
![]() Flip Electronics | LPC1812JBD144E![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 452 | |
LPC1812JBD144![]() | NXP Semiconductors | Stock RoHS : Compliant | 240 | |||
![]() Neutron USA | FTD1812GRM | Altech Corporation | Terminals WIRE CONNECTOR,2x18AWG/1.0sqmm |
| 50 | |
| 004181213 | Altech Corporation | Specialty Fuses Fuse,NH00C,gG,M,80A,500VAC |
| 6 | ||
| 72.01.8.125.0000 | FINDER SpA | Level Monitoring Relay with SPDT Contacts; 1 Phase; 110 - 125 V ac RoHS : Compliant |
| 5 | ||
| 1812540500 | Weidmüller Interface GmbH & Co. KG | Sensor Cables / Actuator Cables SAIL-M12BG-4S5.0U RoHS : Compliant |
| 1 | ||
| 09451812580XL | HARTING Technology Group | Plug Connector, Male, 10pos, 8contacts, Right Angle, Solder, ix Industrial 10A-1 plug A1-S RoHS : Compliant |
| 0 | ||
| IME18-12NNOZC0S | SICK AG | Proximity Sensor,Inductive, R: 12mm, M18 Barrel Non-flush, DC 3-wire NPN,NC, M12,M Conn |
| 0 | ||
| E2K-C25MY1-8 1.2M | OMRON Corporation | Proximity Sensors E2K-C25MY1 w/ Ground Wire |
| 0 | ||
| FLX18-12M30, 84748 | Banner Engineering Corp | Banner Engineering FLX18-12M30 Lighting, Accessories Lighting, Brackets |
| 0 | ||
| LPH-18-12 | Mean Well | Switching Power Supply 18W 12V 1.5A, Wire Leads, Free air, Iso Plastic Case, 180-264VACin RoHS : Compliant |
| 0 | ||
| 09451812581XL | HARTING Technology Group | Modular Connector, Male, Contacts: 8 + 2x GND, Angled bottom, IDC term, ix Industrial 10A-1 plug A1-I26 RoHS : Compliant |
| 0 | ||
| IME18-12NPPZC0S | SICK AG | ProXimity Sensor,9.72mm Range,M18 Barrel NF, DC 4 wire NO/NC PNP, M12, 4-Pin Male connector |
| 0 | ||
| VL18-54-MS/40A/118/128 | PEPPERL + FUCHS AUTOMATION | PE Sensor, Retro Polar, M18 Barrel Flush, 3° Opening, NPN/PNP, D/L, R: 3.5m, 10-30VDC, M12 Conn |
| 0 | ||
| A1481812 | Amphenol Lutze | High Flexing Control Cable; 18 AWG/1.0mm 12C ; Grey PVC; 600V UL AWM |
| 0 | ||
| 1812830 | Phoenix Contact | Pluggable Terminal Blocks GMSTB 2 5 HCV 10-ST-7 62-LR RoHS : Compliant |
| 0 | ||
| IF-18-12 | Signal Transformer Inc | Semi-Toroidal 18VA Power Transformer 115V, 230V Primary Parallel 6V, Series 12V Secondary Parallel 3A, Series 1.5A Through Hole |
| 0 | ||
![]() Pasternack Enterprises US | PE3FCA181-25M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to LC UPC, OM1 Multimode Distribution Cable, 4.5mm Plenum, 2.0mm breakout, Orange-25M. Pasternack’s PE3FCA181-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 4-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our orange fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA181-25M fiber optic cable with a 4.5 mm cable diameter and 45 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 84 | |
| PE3M0318-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Pin to SMA Female Cable 12 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0318-12 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0318-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0318-12 between-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMZ pin to SMA female cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0318-12 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements. |
| 48 | ||
| PE3C11118-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female to TNC Male Low Loss Cable 12 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11118-12 low loss SMA female to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11118-12 can also be known as a low loss SMA jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11118-12 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our SMA female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11118-12 SMA jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11118-12 can also be used in the other direction and will be a TNC male to SMA female cable assembly if the opposite connectivity is required. This low loss SMA jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W18126LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to SMA Male Cable Using LMR-240 Coax with HeatShrink, LF Solder. PE3W18126LF/HS is a reverse polarity TNC male to SMA male cable using LMR-240 coax. This Pasternack reverse polarity TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18126LF/HS TNC reverse polarity male to SMA male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C4418-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 12 inches. SSMC Plug Right Angle to TNC Male Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly SSMC plug right angle to TNC male cable 12 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug right angle to TNC male cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SSMC cable connection on one end and TNC cable connection on the other. Our right angle SSMC to TNC cable assemblies have a plug gender on end 1 and male on end 2. This SSMC to TNC cable is a plug to male coax assembly, PE3C4418-12, can also be known as a right angle SSMC male to TNC plug cable assembly and will be shipped same-day as it is purchased. SSMC male to TNC plug cable assembly PE3C4418-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with right angle SSMC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 500 MHz maximum frequency SSMC right angle plug to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4418-12 can also be used in the other direction and will be TNC male to right angle SSMC plug cable assembly if the opposite connectivity is required. SSMC right angle male to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to TNC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug right angle to TNC male cable 12 inch length using RG316 coax. |
| 0 | ||
| PE3C8181-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to SSMC Plug Low Loss Cable 200 CM Length Using LMR-100 Coax., Radio frequency assembly SMA male to SSMC plug low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SSMC plug low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SSMC cable connection on the other. Our low loss SMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C8181-200CM can also be known as a low loss SMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8181-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SMA plug to SSMC male cable assembly PE3C8181-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder (captive contact) attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8181-200CM can also be used in the other direction and will be a SSMC plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C8181-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SSMC Plug Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to SSMC plug low loss cable 24 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SSMC plug low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SSMC cable connection on the other. Our low loss SMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C8181-24 can also be known as a low loss SMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8181-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SMA plug to SSMC male cable assembly PE3C8181-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder (captive contact) attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8181-24 can also be used in the other direction and will be a SSMC plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W18127 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Male Right Angle Cable Using LMR-600 Coax. PE3W18127 is a N female bulkhead to N male right angle cable using LMR-600 coax. This Pasternack N female bulkhead to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18127 N female bulkhead to N male right angle cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W18122LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to Reverse Polarity TNC Male Cable Using RG8X Coax, LF Solder. PE3W18122LF is a reverse polarity SMA male to reverse polarity TNC male cable using RG8X coax. This Pasternack reverse polarity SMA male to reverse polarity TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male SMA to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18122LF SMA reverse polarity male to TNC reverse polarity male cable assembly is constructed with RG8X coax. | 0 | |||
| PE3W18125 | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. SHV Plug to SHV Plug Right Angle Cable Using RG393 Coax. PE3W18125 is a SHV plug to SHV plug right angle cable using RG393 coax. This Pasternack SHV plug to SHV plug right angle cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. SHV to SHV right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SHV to plug SHV right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18125 SHV plug to SHV plug right angle cable assembly is constructed with RG393 coax. | 0 | |||
| PE3W18120 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. TNC Male to TNC Female 4 Hole Flange Cable Using RG316-DS Coax. PE3W18120 is a TNC male to TNC female 4 hole flange cable using RG316-DS coax. This Pasternack TNC male to TNC female 4 hole flange cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to female TNC 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18120 TNC male to TNC female 4 hole flange cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3W18120/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. TNC Female 4 Hole Flange to TNC Male Cable Using RG316-DS Coax with HeatShrink. PE3W18120/HS is a TNC female 4 hole flange to TNC male cable using RG316-DS coax. This Pasternack TNC female 4 hole flange to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our female TNC 4 hole flange to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18120/HS TNC female 4 hole flange to TNC male cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3W18129LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack 2 Hole Flange to Snap-On BMA Jack Cable Using PE-SR402FLJ Coax with HeatShrink, LF Solder. PE3W18129LF/HS is a BMA jack 2 hole flange to BMA jack cable using PE-SR402FLJ coax. This Pasternack BMA jack 2 hole flange to BMA jack cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm BMA for connector 2. Our jack BMA 2 hole flange to jack BMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W18129LF/HS BMA jack 2 hole flange to BMA jack cable assembly is constructed with PE-SR402FLJ coax. | 0 | |||
| PE3W16318-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Female Bulkhead to N Female Bulkhead Low Loss Cable 120 Inch Length Using LMR-600-UF Coax with Times Microwave Components., Radio frequency assembly N female bulkhead to N female bulkhead low loss cable 120 inch length using LMR-600-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to N female bulkhead low loss cable 120 inch length using LMR-600-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a type N bulkhead cable connection on the other. Our low loss type N to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W16318-120 can also be known as a low loss type N jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16318-120 RF cable has a TPE jacket of 0.590-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our bulkhead type N female to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N jack to type N jack cable assembly PE3W16318-120 is built with LMR-600-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N jack bulkhead to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W18128/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SSMA Male to SSMA Male Cable Using PE-SR405FLJ Coax with HeatShrink. PE3W18128/HS is a SSMA male to SSMA male cable using PE-SR405FLJ coax. This Pasternack SSMA male to SSMA male cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SSMA for connector 2. Our male SSMA to male SSMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W18128/HS SSMA male to SSMA male cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
![]() Venkel Ltd. | C1812X7R102-222KNE![]() | VENKEL LTD | HV Chip Capacitor;1812;X7R;1000V;2200pF;�10% RoHS : Compliant | 3,000 | ||
C1812X7R101-274KNE![]() | VENKEL LTD | Chip Capacitor;1812;X7R;100V;0.27uF;�10% RoHS : Compliant | 0 | |||
C1812X7R202-272KNE![]() | VENKEL LTD | HV Chip Capacitor;1812;X7R;2000V;2700pF;�10% RoHS : Compliant | 0 | |||
C1812X7R250-105MNE![]() | VENKEL LTD | Chip Capacitor;1812;X7R;25V;1uF;�20% RoHS : Compliant | 0 | |||
| C1812X7R250-226MNU | VENKEL LTD | Chip Capacitor;1812;X7R;25V;22uF;�20% RoHS : Compliant | 0 | |||
C1812X7R250-475MNE![]() | VENKEL LTD | Chip Capacitor;1812;X7R;25V;4.7uF;�20% RoHS : Compliant | 0 | |||
C1812X7R251-821KNE![]() | VENKEL LTD | HV Chip Capacitor;1812;X7R;250V;820pF;�10% RoHS : Compliant | 0 | |||
C1812X7R500-154KNE![]() | VENKEL LTD | Chip Capacitor;1812;X7R;50V;0.15uF;�10% RoHS : Compliant | 0 | |||
C1812X7R501-102KNE![]() | VENKEL LTD | HV Chip Capacitor;1812;X7R;500V;1000pF;�10% RoHS : Compliant | 0 | |||
| C1812X7R501-184KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;500V;0.18uF;�10% RoHS : Compliant | 0 | |||
C1812X7R501-391KNE![]() | VENKEL LTD | HV Chip Capacitor;1812;X7R;500V;390pF;�10% RoHS : Compliant | 0 | |||
C1812X7R501-472KNE![]() | VENKEL LTD | HV Chip Capacitor;1812;X7R;500V;4700pF;�10% RoHS : Compliant | 0 | |||
| C1812X7R601-152KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;600V;1500pF;�10% RoHS : Compliant | 0 | |||
| C1812X7R631-102KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;630V;1000pF;�10% RoHS : Compliant | 0 | |||
| C1812X7R631-472KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;630V;4700pF;�10% RoHS : Compliant | 0 | |||
![]() Vyrian | Z1812C202BPWZT | KEMET Corporation | Passive Filter | 18,175 | ||
| VJ1812A472KBBAT4X | Vishay Intertechnologies | Ceramic Capacitor, Multilayer, Ceramic, 100V, 10% +Tol, 10% -Tol, C0G, 30ppm/Cel TC, 0.0047uF, Surface Mount, 1812 RoHS : Compliant | 16,117 | |||
| VCAS06AG18120YAT3A | KYOCERA AVX | Varistor, Surface Mount | 16,114 | |||
| VJ1812Y222KXGAT | Vishay Intertechnologies | Ceramic Capacitor, Multilayer, Ceramic, 1000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.0022uF, Surface Mount, 1812 RoHS : Compliant | 14,452 | |||
| V45MLA1812NT | Littelfuse Inc | Varistor, 45V, 4J, Surface Mount RoHS : Compliant | 12,468 | |||
| VC06AG18120YAT3A | KYOCERA AVX | Varistor, 18V, Surface Mount | 12,379 | |||
| VJ1812A221KXEAT | Vishay Intertechnologies | Ceramic Capacitor, Multilayer, Ceramic, 500V, 10% +Tol, 10% -Tol, C0G, 30ppm/Cel TC, 0.00022uF, Surface Mount, 1812 RoHS : Compliant | 12,343 | |||
| V18MLA1812NT | Littelfuse Inc | Varistor, 18V, 2.9J, Surface Mount RoHS : Compliant | 12,287 | |||
| V30MLA1812NT | Littelfuse Inc | Varistor, 30V, 3.7J, Surface Mount RoHS : Compliant | 7,179 | |||
| VGAS181226P570DP | KYOCERA AVX | Varistor, 26V, 2.5J, Surface Mount | 4,041 | |||
| VCAT06AG18120YAT1A | KYOCERA AVX | Varistor, 18V, Surface Mount | 833 | |||
| VJ1812Y104KXEAT2L | Vishay Intertechnologies | Ceramic Capacitor, Multilayer, Ceramic, 500V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.1uF, Surface Mount, 1812 | 801 | |||
| VJ1812A101KXHAT4X | Vishay Intertechnologies | Ceramic Capacitor, Multilayer, Ceramic, 3000V, 10% +Tol, 10% -Tol, C0G, 30ppm/Cel TC, 0.0001uF, Surface Mount, 1812 | 661 | |||
| VJ1812Y104KXEATA2 | Vishay Intertechnologies | Ceramic Capacitor, Multilayer, Ceramic, 500V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.1uF, Surface Mount, 1812 | 544 | |||
| VCAT06AG18120YAT3A | KYOCERA AVX | Varistor, 18V, Surface Mount | 388 | |||
![]() Waytek, Inc. | 39100-1812 | Molex | 22-12 GA Terminal Block 8 MM EuroStyle 600V 12 POLE 20A REPLACED 47163 47157 |
| 1,846 | |
![]() Win Source Electronics | MF-MSMF050-2/0.5A/1812 | Bourns Inc |
| 183,150 | ||
| 1812L150ZR | Littelfuse Inc | PTC 1.50A 8VDC RESETTABLE RoHS : Compliant |
| 76,000 | ||
| SMD1812P150TF/24 | Littelfuse Inc | RoHS : Unknown |
| 71,435 | ||
| 1812L035/30DR | Littelfuse Inc | FUSE PTC RESET .35A 30V 1812 RoHS : Compliant |
| 60,000 | ||
| PE-1812ACC510STS | Pulse Electronics Corporation | CMC 230MA 2LN 3.5KOHM SMD RoHS : Compliant |
| 50,000 | ||
| TLV7111812DSE | Texas Instruments | Dual Linear Voltage Regulator 200mA/200mA 1.8V/1.2V Output WSON-6 |
| 27,018 | ||
| 1812L260THDR | Littelfuse Inc | PTC Resettable Fuse 2.6A(hold) 5.2A(trip) 8VDC 100A 0.8W 2.5s 0.015Ohm SMD Solder Pad 1812 T/R / PTC 2.60A 8VDC RESETTABLE 1812L RoHS : Compliant |
| 21,688 | ||
| 1812L300/24SLER | Littelfuse Inc | PTC RESET FUSE 3.0A 24V 1812 RoHS : Compliant |
| 18,888 | ||
| 1-1318120-3 | TE Connectivity | CONN RECEPT 2.5 3POS KEY-X RoHS : Compliant |
| 16,056 | ||
| 1812L200/16DR | Littelfuse Inc | PTC 16V POLYFUSE SMT 1812 2.00A RoHS : Compliant |
| 6,500 | ||
| 1812L014DR | Littelfuse Inc | PTC RESETTABLE 60V 140MA 1812L RoHS : Compliant |
| 5,750 | ||
1812B474K251CT![]() | Walsin Technology Corporation | CAP CER 0.47UF 250V X7R 1812 / 0.47 μF ±10% 250V Ceramic Capacitor X7R 1812 (4532 Metric) RoHS : Compliant |
| 4,950 | ||
ISL9R18120S3ST![]() | Fairchild Semiconductor Corporation | DIODE GEN PURP 1.2KV 18A TO263-2 RoHS : Compliant |
| 3,991 | ||
LT1812IS5![]() | Linear Technology | 3mA, 100MHz, 750V/us Operational Amplifier with Shutdown RoHS : Not Compliant |
| 3,550 | ||
C1812C102KHRAC7800![]() | KEMET Corporation | CAP CER 1000PF 3KV X7R 1812 / 1000 pF ±10% 3000V (3kV) Ceramic Capacitor X7R 1812 (4532 Metric) RoHS : Compliant |
| 2,870 | ||
![]() Wuhan P&S | 1812L110/33MR | Littelfuse Inc | 33V,20A,1812 Surface Mount PTC RoHS : Compliant |
| 2,000 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |