| データシートサーチシステム |
|
18BXEA-E1-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() STMicroelectronics | STT818B | STMicroelectronics | HIGH GAIN LOW VOLTAGE PNP POWER TRANSISTOR RoHS : Compliant |
| 4,500 | |
ITA18B1RL![]() | STMicroelectronics | 4 line 25 A - 8/20 ?s, 15 V TVS in S0-8 RoHS : Compliant |
| 1,435 | ||
| TDA7718BTR | STMicroelectronics | 3 band car audio processor RoHS : Compliant |
| 0 | ||
| L9918B-BDTR | STMicroelectronics | Alternator voltage regulator with LIN interface for 12 V applications |
| 0 | ||
| TDA7718B | STMicroelectronics | 3 band car audio processor RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | 1032X18BARBELBOWORING | FASTNL | AVAILABLE EU | 112 | ||
| LMK05318BRGZR | TEXAS INSTRUMENTS INC | AVAILABLE EU | 3,290 | |||
PRF18BE471QS5RB![]() | Murata Manufacturing Co Ltd | AVAILABLE EU RoHS : Compliant | 69,261 | |||
![]() PUI | AB0818B | PUI Audio |
| 200 | ||
| 2111-2X05G00S-4.1-8B | 6 | |||||
| 318BT | 1 | |||||
| F221B1/8 BK100 | 1 | |||||
![]() Braemac Americas-Symmetry | CM118B | C-Media Electronics Inc | USB Audio Codec with stereo mic, mic only mode, I2S out/I2C and crystal-less |
| 1 | |
| CM118B-EVAL | C-Media Electronics Inc | Eval Board for CM118B |
| 1 | ||
ABM11-25.000MHZ-18-B2Y-T![]() | Abracon Corporation | CRYSTAL 25.0000MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| C30618BFCH | Excelitas Technologies Corporation | InGaAs PIN, 350 m, TO-18, FC Receptacle RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | BLM18BB220SN1D | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 7,700 | |
| BLM18BD601SN1D | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,482 | ||
| FPR2-T218B-R033-0.5% | Riedon | IN STOCK SHIP TODAY |
| 400 | ||
| CPX-100-1/8-BLACK-1000 | DSG-Canusa | IN STOCK SHIP TODAY | 400 | |||
| FPR2-T218B-R068-0.5% | Powertronix | IN STOCK SHIP TODAY |
| 388 | ||
| DS18B20+ | Dallas Semiconductor | IN STOCK SHIP TODAY |
| 200 | ||
| FP-301-1/8-BL500 | 3M | IN STOCK SHIP TODAY |
| 132 | ||
CY2318BNZPVI-11![]() | Cypress Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 51 | ||
| HEF4018BP | IN STOCK SHIP TODAY | 25 | ||||
| GR-1/8B | Festo | IN STOCK SHIP TODAY | 11 | |||
| GXL-18-BLK/GRN/YEL | IN STOCK SHIP TODAY | 6 | ||||
| 53711-5538518-B | United Microelectronics Corporation | IN STOCK SHIP TODAY | 5 | |||
| CD4518BE | RCA | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| MS24264R18B31PY | RMS | IN STOCK SHIP TODAY |
| 4 | ||
MAX518BCSA+![]() | Maxim Integrated Products | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
![]() Flip Electronics | NCP718BSN150T1G | onsemi | Stock, Ship Today RoHS : Compliant | 21,000 | ||
| R5F52318BGFL#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 6,624 | |||
| FAN48618BUC53X | onsemi | Stock, Ship Today RoHS : Compliant | 6,000 | |||
| R5F52318BGFP#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 4,695 | |||
| R5F52318BGFM#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 4,376 | |||
| R5F52618BGFP#70 | Renesas Electronics Corporation | Stock | 2,070 | |||
| NCV8718BMT330TBG | onsemi | Stock, Ship Today RoHS : Compliant | 2,056 | |||
| R5F52318BDLA#20 | Renesas Electronics Corporation | Stock RoHS : Compliant | 1,309 | |||
| R5F52318BDFM#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 1,176 | |||
| R5F52318BDFL#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 934 | |||
| R5F52318BDFP#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 709 | |||
| KTDM4G3C818BGIEAT | SmartSemi | Stock, Ship Today |
| 210 | ||
| KTDM2G3C818BGIEAT | SmartSemi | Stock, Ship Today |
| 210 | ||
| R5F52318BDND#20 | Renesas Electronics Corporation | Stock RoHS : Compliant | 202 | |||
| R5F52318BDNE#20 | Renesas Electronics Corporation | Stock RoHS : Compliant | 68 | |||
![]() Neutron USA | XS218BLPAL2 | Telemechanique Sensors | Inductive Proximity Sensor 0.315" (8mm) IP67 Cylinder, Threaded - M18 |
| 50 | |
| RM3U18BRKT | Hammond Manufacturing | Racks & Rack Cabinet Accessories Rear Bracket Kit For RM Series Racks RoHS : Compliant |
| 50 | ||
| MC-18B-DC24V | Altech Corporation | MC 3 Pole Contactor; Non-Rev; Screw; 18A; 7.5 KW; S00; 24 VDC Coil |
| 29 | ||
| XS518B1DAM12 | Telemechanique Sensors | Inductive Proximity Sensor 0.197" (5mm) IP67, IP69K Cylinder, Threaded - M18 |
| 6 | ||
| XS518B1NAM12 | Telemechanique Sensors | Proximity Sensors PROXIMITY SENSOR 18MM DC NPN XS5 |
| 3 | ||
| ST8000NM018B | Seagate Technology | EXOS 7E10 8TB 512E/4KN SAS 3.5INCH |
| 3 | ||
| ACE-A618B-RS-R10 | iEi Integration Corporation | 1U flex ATX 180W Power Supply;90~264VAC;ERP;CCL;RoHS |
| 1 | ||
| PAA500-18B | TT Electronics / Power Partners | Power Supplies - Chassis Mount 500W/48V U Bracket |
| 0 | ||
| GST18B18-P1J | Mean Well | Desktop AC Adapters 18W 18V 1A Level VI 2 pole RoHS : Compliant |
| 0 | ||
| HTB18-B4A2BAD06 | SICK AG | PE Prox Sensor, BGS, M18 Nose, R: 5-150mm, 631nm, 10-30VDC, 1kHz PNP/NPN,LO, M12 M Conn |
| 0 | ||
| GSC18B-1400 | Mean Well | LED Power Supplies 18.2W 6-13V 1400mA 90-277Vin CC LED PS |
| 0 | ||
| KF436C18BB/16 | Kingston Technology Company | 16GB 3600 DDR4 CL18 DIMM FURY BEAST BLK |
| 0 | ||
| FWE030018B-10A | Inventus Power | Power Supply; 30 WATT DESKTOPCLASS II18V 1.7A |
| 0 | ||
| GST18B12-P1J | Mean Well | Desktop AC Adapters 18W 12V 1.5A Level VI 2 pole RoHS : Compliant |
| 0 | ||
| KF436C18BBK2/64 | Kingston Technology Company | 64GB 3600 DDR4 CL18 KIT 2 FURY BEAST BLK |
| 0 | ||
![]() Pasternack Enterprises US | PE3C8818/BL | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BL coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/BL, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/BL is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BL coax. | 495 | ||
| PE3C8818/BR | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BR, RF Cable Type: Belden 1694A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-BR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/BR, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/BR is built with Belden 1694A-BR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BR coax. | 484 | |||
| PE3C8818/BK | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BK, RF Cable Type: Belden 1694A-BK, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-BK Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BK coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BK coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/BK, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/BK is built with Belden 1694A-BK which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BK coax. | 449 | |||
| PE3C8818/BK-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BK, RF Cable Type: Belden 1694A-BK, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-BK Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BK coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BK coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/BK-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/BK-12 is built with Belden 1694A-BK which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BK coax. |
| 105 | ||
| PE3C8818/BK-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BK, RF Cable Type: Belden 1694A-BK, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-BK Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BK coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BK coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/BK-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/BK-120 is built with Belden 1694A-BK which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BK coax. |
| 96 | ||
| PE3W22318/BR/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 20KV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. 20KV Male to 7/16 DIN Male Right Angle Cable Using RG225 with HeatShrink. PE3W22318/BR/HS is a 20KV male to 7/16 DIN male right angle cable using RG225 coax. This Pasternack 20KV male to 7/16 DIN male right angle cable assembly uses a 50 Ohm 20KV for connector 1 and a 50 Ohm 7/16 DIN for connector 2. 20KV to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 20KV to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22318/BR/HS 20KV male to 7/16 DIN male right angle cable assembly is constructed with RG225 coax. | 0 | |||
| PE3W05018/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 10KV, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. 1.0/2.3 Male Right Angle to 10KV Male Cable Using LMR-195-FR Coax with HeatShrink., Pasternack’s PE3W05018/BK/HS right angle 1.0/2.3 male to 10KV male RF cable assembly using LMR-195-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 male to 10KV male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.0/2.3 to 10KV cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle 1.0/2.3 cable connection on one end and a 10KV cable connection on the other. Our 1.0/2.3 to 10KV cable assembly has a male gender on end 1 and a male on end 2. PE3W05018/BK/HS can also be known as a right angle 1.0/2.3 plug to 10KV plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05018/BK/HS RF cable has an frpe jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. This PE3W05018/BK/HS 1.0/2.3 plug to 10KV plug cable assembly is built with LMR-195-FR, which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with right angle 1.0/2.3 to 10KV cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp attachment method and a brass body with copper-tin-zinc alloy plating, while the other has the crimp/solder attachment method and a brass body with nickel over copper plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05018/BK/HS can also be used in the other direction and will be a 10KV male to right angle 1.0/2.3 male cable assembly if the opposite connectivity is required. This 1.0/2.3 right angle plug to 10KV plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 10KV cable assembly for quick shipment worldwide. Variations of 1.0/2.3 and 10KV cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0/2.3 to 10KV RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE9936-18-B | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Spade, Connector Gender 2: Lug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: BK18AWGWire, RF Cable Type: Black Wire. Banana Plug to Spade Lug Cable 18 Inch Length Using Black Wire. Very low frequency equipment test lead cable assembly PE9936-18-B from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a spade connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and lug for side 2. Banana plug to spade lug cable test lead for RF is constructed with Black Wire cable and the impedance is. PE9936-18-B Banana plug to spade lug test equipment lead using Black Wire cable has a 18 inch length. Pasternack banana to spade Black Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to spade connectors and Black Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE3C9418/BL/HS | Pasternack Enterprises | 0 | ||||
| PE3C9418/BL/HS2 | Pasternack Enterprises | 0 | ||||
| PE9931-18-B | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: BK18AWGWire, RF Cable Type: Black Wire. Banana Plug to Alligator Clip Cable 18 Inch Length Using Black Wire. Very low frequency equipment test lead cable assembly PE9931-18-B from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a alligator connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and clip for side 2. Banana plug to alligator clip cable test lead for RF is constructed with Black Wire cable and the impedance is. PE9931-18-B Banana plug to alligator clip test equipment lead using Black Wire cable has a 18 inch length. Pasternack banana to alligator Black Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to alligator connectors and Black Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9933-18-B | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Mini Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: BK18AWGWire, RF Cable Type: Black Wire. Banana Plug to Mini Alligator Clip Cable 18 Inch Length Using Black Wire. Very low frequency equipment test lead cable assembly PE9933-18-B from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a mini alligator connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and clip for side 2. Banana plug to mini alligator clip cable test lead for RF is constructed with Black Wire cable and the impedance is. PE9933-18-B Banana plug to mini alligator clip test equipment lead using Black Wire cable has a 18 inch length. Pasternack banana to mini alligator Black Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to mini alligator connectors and Black Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE3C0218/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-400-UF Coax with HeatShrink, LF Solder., Pasternack’s PE3C0218/BK/HS type N male to type N male RF cable assembly using LMR-400-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0218/BK/HS can also be known as a type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0218/BK/HS RF cable has a tpe jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. This PE3C0218/BK/HS type N plug to type N plug cable assembly is built with LMR-400-UF, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE9935-18-B | Pasternack Enterprises | Key Specifications, Connector Series 1: Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Spade, Connector Gender 2: Lug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: BK18AWGWire, RF Cable Type: Black Wire. Alligator Clip to Spade Lug Cable 18 Inch Length Using Black Wire. Very low frequency equipment test lead cable assembly PE9935-18-B from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a alligator cable connector on side 1. Our alligator test lead assembly has a spade connector on side 2. Alligator to alligator RF test equipment lead cable is manufactured with clip gender for side 1 and lug for side 2. Alligator clip to spade lug cable test lead for RF is constructed with Black Wire cable and the impedance is. PE9935-18-B Alligator clip to spade lug test equipment lead using Black Wire cable has a 18 inch length. Pasternack alligator to spade Black Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with alligator to spade connectors and Black Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE3W05118/BK/HS | Pasternack Enterprises | 0 | ||||
![]() Venkel Ltd. | MELFC0207-XC-1R18BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;1.18R;�0.1% RoHS : Compliant | 0 | ||
| MELFC0207-VC-1R18BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;1.18R;�0.1% RoHS : Compliant | 0 | |||
| MELFC0204-TC-1R18BT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;1.18R;�0.1% RoHS : Compliant | 0 | |||
![]() Vyrian | XXA18B1PM12 | Schneider Electric | Ultrasonic Sensor RoHS : Compliant | 14,495 | ||
| XS518B1PBM12 | Schneider Electric | Inductive Sensor, Cylindrical, Flush Mount RoHS : Compliant | 12,508 | |||
| ZSSC3018BA1B | Renesas Electronics Corporation | Analog Circuit RoHS : Compliant | 10,378 | |||
| VMMK-1218-BLKG | Broadcom Limited | RF Small Signal Field-Effect Transistor, 1-Element, KU Band, Gallium Arsenide, N-Channel, High Electron Mobility FET RoHS : Compliant | 9,725 | |||
| XS118BLPAM12 | Schneider Electric | Inductive Sensor, Cylindrical RoHS : Compliant | 9,442 | |||
| TP4018BJ | Texas Instruments | Decade Counter, Synchronous, Up Direction, CMOS, CDIP16 RoHS : Not Compliant | 8,990 | |||
| UFZVTE-1718B | ROHM Semiconductor | Zener Diode, 18V V(Z), 2.72%, 0.5W, Silicon, Unidirectional RoHS : Compliant | 8,602 | |||
| MT49H32M18BM-18-B-TR | Micron Technology Inc | 7,075 | ||||
| XDRA718BIGCBD | Texas Instruments | RISC Microcontroller | 6,422 | |||
| TMDXIDK5718-BTA | Texas Instruments | 5,654 | ||||
| MT49H16M18BM-18:B | Micron Technology Inc | DDR DRAM, 16MX18, CMOS, PBGA144 RoHS : Compliant | 5,589 | |||
MT49H32M18BM-18:B![]() | Micron Technology Inc | DDR DRAM, 32MX18, 15ns, CMOS, PBGA144 RoHS : Compliant | 4,616 | |||
| TP4018BN | Texas Instruments | Decade Counter, Synchronous, Up Direction, CMOS, PDIP16 RoHS : Not Compliant | 3,947 | |||
| XS618B1PAL2EX | Schneider Electric | Inductive Sensor RoHS : Compliant | 341 | |||
| VDZT2R18B | ROHM Semiconductor | Zener Diode, 18V V(Z), 2.2%, 0.1W, Silicon RoHS : Compliant | 323 | |||
![]() Waytek, Inc. | 7618B | Egis Mobile Electric | Universal Voltage Sensitive Relay w/ Optional Time Delay 160 AMP |
| 50 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |