| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow |
 Pasternack Enterprises US | PE3W16242LF
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-LW240, RF Cable Type: LMR-LW240, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Plug to SMA Male Low Loss Cable Using LMR-LW240 Coax, LF Solder., Radio frequency assembly reverse polarity SMA plug to SMA male low loss cable using LMR-LW240 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA plug to SMA male low loss cable using LMR-LW240 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity SMA cable connection on one end and a SMA cable connection on the other. Our low loss reverse polarity SMA to SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3W16242LF can also be known as a low loss reverse polarity SMA male to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16242LF RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our SMA plug to SMA male cable has a maximum VSWR of 1.4:1. Reverse polarity SMA male to SMA plug cable assembly PE3W16242LF is built with LMR-LW240 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16242LF can also be used in the other direction and will be a SMA male to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | | 2,355
 |
PE3W06424-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to TNC Male Low Loss Cable 24 Inch Length Using LMR-240-UF Coax., Radio frequency assembly SMA male right angle to TNC male low loss cable 24 inch length using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male low loss cable 24 inch length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our low loss right angle SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W06424-24 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06424-24 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3W06424-24 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W06424-24 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $70.69 10 : $69.28 25 : $67.86 100 : $66.45
|
| 988
 |
PE3W16242LF-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-LW240, RF Cable Type: LMR-LW240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Reverse Polarity SMA Plug to SMA Male Low Loss Cable 36 Inch Length Using LMR-LW240 Coax, LF Solder., Radio frequency assembly reverse polarity SMA plug to SMA male low loss cable 36 inch length using LMR-LW240 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA plug to SMA male low loss cable 36 inch length using LMR-LW240 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity SMA cable connection on one end and a SMA cable connection on the other. Our low loss reverse polarity SMA to SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3W16242LF-36 can also be known as a low loss reverse polarity SMA male to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16242LF-36 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our SMA plug to SMA male cable has a maximum VSWR of 1.4:1. Reverse polarity SMA male to SMA plug cable assembly PE3W16242LF-36 is built with LMR-LW240 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16242LF-36 can also be used in the other direction and will be a SMA male to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $111.99 25 : $106.39 50 : $100.79 100 : $96.31
|
| 524
 |
PE410-06573-242
| Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: TRB, Connector Gender: Plug, Impedance: 78 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 500 MHz, Interface Type 1: 30-02002, Interface Type 2: TWAC-78-1F2. 78 Ohm TRB Plug 1553 Connector Crimp/Solder Attachment for 30-02002, TWAC-78-1F2,. PE410-06573-242 TRB plug coaxial connector has an interface type of TRB plug 30-02002, TWAC-78-1F2 and a 78 Ohm impedance.Pasternack TRB plug connector uses shield/contact crimp/solder as an attachment method. Our plug TRB coaxial connector provides a minimum frequency of DC and a maximum frequency of 500 MHz. The Pasternack TRB coaxial connector has a brass body with nickel plating. This TRB plug coaxial RF connector is REACH compliant. Our high quality PE410-06573-242 features a ASTM-B-733 body plating specification. We also build TRB custom connector cable assemblies that will ship the same day as well. Our TRB plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you to the perfect RF connector as per your requirement. | 1 : $51.39 25 : $48.82 50 : $46.25 100 : $44.2
|
| 484
 |
PE3C2427/HS-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Jack to Reverse Polarity SMA Plug Low Loss Cable 12 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA jack to reverse polarity SMA plug low loss cable 12 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA jack to reverse polarity SMA plug low loss cable 12 inch length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity SMA cable connection on one end and a reverse polarity SMA cable connection on the other. Our low loss reverse polarity SMA to reverse polarity SMA cable assembly has a jack gender on end 1 and a plug on end 2. PE3C2427/HS-12 can also be known as a low loss reverse polarity SMA female to reverse polarity SMA male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2427/HS-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA jack to SMA plug cable has a maximum VSWR of 1.4:1. Reverse polarity SMA female to reverse polarity SMA male cable assembly PE3C2427/HS-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2427/HS-12 can also be used in the other direction and will be a reverse polarity SMA plug to reverse polarity SMA jack cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity female to SMA reverse polarity male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $136.99 25 : $130.14 50 : $123.29 100 : $117.81
|
| 67
 |
PE3M0242-300CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL-27478, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 118.11 inches. Temperature Conditioned TNC Male to N Male Right Angle Low Loss Cable 300 cm Length Using PE-P300LL Coax., Pasternack temperature conditioned TNC male to N male right angle low loss cable 300 cm length using PE-P300LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0242-300CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability TNC to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with TNC connection on one end and right angle N type connection on the other. Our low loss TNC to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This TNC to N type cable is a male to male coax assembly. PE3M0242-300CM can also be known as a temperature conditioned low loss TNC plug to right angle type N plug cable assembly and will be shipped the same day after it is purchased. TNC plug to type N plug cable assembly PE3M0242-300CM is built with PE-P300LL which is a flexible coax. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency TNC male to type N right angle male cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0242-300CM can be used in the other direction and will be right angle type N male to TNC male cable assembly. Pasternack high reliability low loss TNC plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for same-day shipment worldwide. Variations of PE44810 TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned TNC male to N male right angle low loss cable 300 cm length using PE-P300LL coax. | 1 : $1,370.0 25 : $1,301.5 50 : $1,233.0 100 : $1,178.2
|
| 8
 |
PE3W24242
| Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to Violet FAKRA Jack Right Angle Cable Using RG174 Coax. PE3W24242 is a MMCX plug right angle to FAKRA jack right angle cable using RG174 coax. This Pasternack MMCX plug right angle to FAKRA jack right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm FAKRA for connector 2. MMCX right angle to FAKRA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to jack FAKRA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24242 MMCX plug right angle to FAKRA jack right angle cable assembly is constructed with RG174 coax. | | 0
 |
PE3C7824-200CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 4.1/9.5 Mini DIN Male Right Angle to 4.1/9.5 Mini DIN Female Low PIM Cable 200 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.1/9.5 mini DIN male right angle to 4.1/9.5 mini DIN female low PIM cable 200 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male right angle to 4.1/9.5 mini DIN female low PIM cable 200 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.1/9.5 mini DIN cable connection on one end and 4.1/9.5 mini DIN cable connection on the other. Our low PIM right angle 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable is a male to female coax assembly, PE3C7824-200CM, can also be known as a low PIM right angle 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack cable assembly PE3C7824-200CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with right angle 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.1/9.5 mini DIN right angle male to 4.1/9.5 mini DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7824-200CM can also be used in the other direction and will be 4.1/9.5 mini DIN female to right angle 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN right angle plug to 4.1/9.5 mini DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male right angle to 4.1/9.5 mini DIN female low PIM cable 200 cm length using 1/4 inch superflexible coax. | 1 : $160.99 25 : $152.94 50 : $144.89 100 : $138.45
|
| 0
 |
PE3W00242/HS
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Right Angle Low Loss Cable Using LMR-200 Coax with HeatShrink., Radio frequency assembly TNC male to TNC male right angle low loss cable using LMR-200 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male right angle low loss cable using LMR-200 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00242/HS can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W00242/HS is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00242/HS can also be used in the other direction and will be right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male right angle low loss cable using LMR-200 coax with heatshrink. | | 0
 |
PE3W17242
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using RG58 Coax. PE3W17242 is a SMA male to SMA male cable using RG58 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17242 SMA male to SMA male cable assembly is constructed with RG58 coax. | | 0
 |
PE3W24244
| Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to Violet FAKRA Jack Right Angle Cable Using RG316 Coax. PE3W24244 is a MMCX plug right angle to FAKRA jack right angle cable using RG316 coax. This Pasternack MMCX plug right angle to FAKRA jack right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm FAKRA for connector 2. MMCX right angle to FAKRA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to jack FAKRA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24244 MMCX plug right angle to FAKRA jack right angle cable assembly is constructed with RG316 coax. | | 0
 |
PE3W15024-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to TNC Male Cable 24 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA male to TNC male cable 24 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to TNC male cable 24 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W15024-24 can also be known as a SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.57-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15024-24 RF cable has a FEP jacket of 0.114-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 85 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3W15024-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15024-24 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC RF cable assembly as per your requirements. | 1 : $117.99 25 : $112.09 50 : $106.19 100 : $101.47
|
| 0
 |
PE3W24243
| Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to Violet FAKRA Jack Right Angle Cable Using RG188 Coax. PE3W24243 is a MMCX plug right angle to FAKRA jack right angle cable using RG188 coax. This Pasternack MMCX plug right angle to FAKRA jack right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm FAKRA for connector 2. MMCX right angle to FAKRA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to jack FAKRA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24243 MMCX plug right angle to FAKRA jack right angle cable assembly is constructed with RG188 coax. | | 0
 |
PE3W10242
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to SMA Male Right Angle Cable Using RG142 Coax. PE3W10242 is a reverse polarity SMA female to SMA male right angle cable using RG142 coax. This Pasternack reverse polarity SMA female to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity female SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10242 SMA reverse polarity female to SMA male right angle cable assembly is constructed with RG142 coax. | | 0
 |
PE3W24265
| Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to N Female 4 Hole Flange Cable Using RG188 Coax. PE3W24265 is a MMCX plug right angle to N female 4 hole flange cable using RG188 coax. This Pasternack MMCX plug right angle to N female 4 hole flange cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm N for connector 2. MMCX right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to female N 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24265 MMCX plug right angle to N female 4 hole flange cable assembly is constructed with RG188 coax. | | 0
 |
 Venkel Ltd. | CR01005-32W-3242FT
| VENKEL LTD | Chip Resistor;01005;1/32W;32.4K;�1% RoHS : Compliant | | 0
 |
CR0805-10W-4242FT
| VENKEL LTD | Chip Resistor;0805;1/10W;42.4K;�1% RoHS : Compliant | | 0
 |
CR0805-8W-1242FT
| VENKEL LTD | Chip Resistor;0805;1/8W;12.4K;�1% RoHS : Compliant | | 0
 |
TFCR0603-10W-K-1242DT
| VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;12.4K;�0.5% RoHS : Compliant | | 0
 |
TFCR0603-16W-K-3242FT
| VENKEL LTD | Thin Film CR;0603;1/16W;�100PPM;32.4K;�1% RoHS : Compliant | | 0
 |
TFCR0805-10W-C-3242CT-1K
| VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;32.4K;�0.25% RoHS : Compliant | | 0
 |
TFCR0805-8W-K-3242CT
| VENKEL LTD | Thin Film CR;0805;1/8W;�100PPM;32.4K;�0.25% RoHS : Compliant | | 0
 |
TFCR1206-4W-C-1242CT
| VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;12.4K;�0.25% RoHS : Compliant | | 0
 |
TFCR1206-4W-K-1242BT-1K
| VENKEL LTD | Thin Film CR;1206;1/4W;�100PPM;12.4K;�0.1% RoHS : Compliant | | 0
 |
TFCR1206-8W-K-1242BT-1K
| VENKEL LTD | Thin Film CR;1206;1/8W;�100PPM;12.4K;�0.1% RoHS : Compliant | | 0
 |
TFCR1210-4W-C-1242DT
| VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;12.4K;�0.5% RoHS : Compliant | | 0
 |
TFCR1210-4W-E-1242CT-1K
| VENKEL LTD | Thin Film CR;1210;1/4W;�25PPM;12.4K;�0.25% RoHS : Compliant | | 0
 |
TFCR2010-4W-K-1242BT-1K
| VENKEL LTD | Thin Film CR;2010;1/4W;�100PPM;12.4K;�0.1% RoHS : Compliant | | 0
 |
TFCR2512-2W-C-3242BT
| VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;32.4K;�0.1% RoHS : Compliant | | 0
 |
UPTF0603-16W-N-1242BT-1K
| VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;12.4K;�0.1% RoHS : Compliant | | 0
 |
 Waytek, Inc. | TY242MX
| Thomas & Betts | Thomas & Betts TY242MX Ty-Rap cable tie is a self-locking nylon tie built for secure wire, cable, hose, and tubing bundling. Its one-piece Ty-Rap locking-head design supports dependable fastening and clean harness organization, and this version is packaged in quantities of 1,000. | 1,000 : $0.2941 5,000 : $0.2555
|
| 10,000
 |
12124264
| Aptiv PLC | Aptiv 12124264 is a medium gray 10-contact TPA secondary lock for Metri-Pack 150 Series connectors. The terminal position assurance component holds terminals firmly in the connector body and also acts as strain relief for a secure 10-circuit assembly. RoHS : Compliant | 40 : $0.206 50 : $0.1878 100 : $0.1637 200 : $0.1558 500 : $0.145 1,000 : $0.1389
|
| 8,911
 |
AHDP04-24-23PR-SRA
| Amphenol Sine Systems | Amphenol Sine Systems AHDP06-24-23PR-SRA DuraMate AHDP plug is a shell size 24, 23-position pin circular connector with reduced diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. | 1 : $8.37 10 : $7.68 50 : $6.98 100 : $6.51 200 : $6.02 500 : $5.71
|
| 583
 |
784-2421-020-20
| Trombetta | 24V Starter Solenoid 100A Continuous - High Performance | 1 : $21.2 5 : $18.92 10 : $17.68 50 : $16.64 100 : $15.92 200 : $15.1
|
| 528
 |
AHDP02-24-29PR-SRA
| Amphenol Sine Systems | Amphenol Sine Systems AHDP02-24-29PR-SRA DuraMate AHDP sealed panel-mount receptacle is a shell size 24, 29-position pin circular connector with reduced diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. | 1 : $9.86 10 : $8.99 50 : $8.56 100 : $8.3 200 : $8.19 500 : $8.03
|
| 523
 |
AHDP02-24-23SR-SRA
| Amphenol Sine Systems | Amphenol Sine Systems AHDP02-24-23SR-SRA DuraMate AHDP sealed panel-mount receptacle is a shell size 24, 23-position socket circular connector with reduced diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. | 1 : $11.8 10 : $11.46 50 : $10.96 100 : $10.23 200 : $9.97 500 : $9.59
|
| 473
 |
AHDP02-24-21SR-SRA
| Amphenol Sine Systems | Amphenol Sine Systems AHDP02-24-21SR-SRA DuraMate AHDP sealed panel-mount receptacle is a shell size 24, 21-position socket circular connector with reduced diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. | 1 : $7.69 5 : $7.63 10 : $7.56 50 : $7.5 100 : $7.43 200 : $7.36
|
| 392
 |
AHDP02-24-23PN-SRA
| Amphenol Sine Systems | Amphenol Sine Systems AHDP02-24-23PN-SRA DuraMate AHDP sealed panel-mount receptacle is a shell size 24, 23-position pin circular connector with normal diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. | 1 : $8.42 10 : $8.3 50 : $8.12 100 : $7.99 200 : $7.81 500 : $7.68
|
| 302
 |
AHDP02-24-29SR-SRA
| Amphenol Sine Systems | Amphenol Sine Systems AHDP02-24-29SR-SRA DuraMate AHDP sealed panel-mount receptacle is a shell size 24, 29-position socket circular connector with reduced diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. | 1 : $13.08 10 : $11.99 50 : $11.15 100 : $10.46 200 : $9.92 500 : $9.54
|
| 219
 |
AHDP06-24-23SR-SRA
| Amphenol Sine Systems | Amphenol Sine Systems AHDP06-24-23SR-SRA DuraMate AHDP plug is a shell size 24, 23-position socket circular connector with reduced diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. | 1 : $13.55 5 : $13.05 10 : $11.97 50 : $11.4 100 : $10.25 200 : $9.9
|
| 200
 |
684-2421-032-02
| Trombetta | Sealed 24V DC Contactor Continuous Duty, Flat Bracket Silver Contacts | 1 : $41.41 5 : $36.98 10 : $34.51 50 : $32.53 100 : $31.06 200 : $29.58
|
| 89
 |
684-2421-012-02
| Trombetta | 24V Powerseal DC Relay Contactor 4 Terminals | 1 : $24.26 5 : $21.66 10 : $20.24 50 : $19.05 100 : $18.22 200 : $17.28
|
| 85
 |
24200
| Cole Hersee | SPST Latching Solenoid 12V 110 A Continuous Duty 24200 | 1 : $96.02 5 : $92.65 10 : $77.61 20 : $73.68 25 : $73.61 50 : $73.61
|
| 80
 |
AHDP02-24-21PN-SRA
| Amphenol Sine Systems | Amphenol Sine Systems AHDP02-24-21PN-SRA DuraMate AHDP sealed panel-mount receptacle is a shell size 24, 21-position pin circular connector with normal diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. | 1 : $14.59 5 : $14.0 10 : $13.41 50 : $13.08 100 : $12.82 200 : $12.56
|
| 65
 |
4300-3242
| Pressmaster AB | Weather Pack Die Set 20-12GA For 560 Crimper | | 50
 |
 Win Source Electronics | M24256-BRMN6TP
 | STMicroelectronics | IC EEPROM 256KBIT 1MHZ 8SO RoHS : Compliant | 1,490 : $0.202 1,110 : $0.2253 860 : $0.2331 625 : $0.2409 405 : $0.2486 170 : $0.303
|
| 275,967
 |
MMSZ5242BS-7-F
| Diodes Incorporated | Zener Diode Single 12V 5% 30Ohm 200mW 2-Pin SOD-323 T/R / DIODE ZENER 12V 200MW SOD323 RoHS : Compliant | 152 : $1.9848 113 : $2.2138 88 : $2.2901 64 : $2.3665 41 : $2.4428 17 : $2.9771
|
| 43,581
 |
BQ24210DQCT
 | Texas Instruments | 800mA, Single-Input, Single Cell Li-Ion Battery Solar Charger RoHS : Compliant | 99 : $3.0438 74 : $3.395 57 : $3.5121 42 : $3.6292 27 : $3.7462 11 : $4.5657
|
| 16,808
 |
0242.050UR
| Littelfuse Inc | FUSE CARTRIDGE 50MA 250VAC/VDC RoHS : Compliant | 310 : $0.9691 250 : $1.0085 195 : $1.0479 135 : $1.1267 90 : $1.1661 45 : $1.2449
|
| 15,000
 |
MMBZ5242BLT3G
 | onsemi | DIODE ZENER 12V 225MW SOD23-3 RoHS : Compliant | 10,990 : $0.0273 8,225 : $0.0304 6,350 : $0.0315 4,620 : $0.0325 2,980 : $0.0336 1,225 : $0.0409
|
| 11,000
 |
BQ24298RTWR
 | Texas Instruments | IC BATT CHARGER USB 3A 24VQFN / Controlled 3A Single Cell USB Charger RoHS : Compliant | 205 : $1.4701 153 : $1.6397 118 : $1.6963 86 : $1.7528 56 : $1.8094 23 : $2.2051
|
| 10,800
 |
10118242-001RLF
| Amphenol FCi | Micro-HDMI D Type Connector For Multimedia Device Market | CONN RCP MICRO HDMI 19POS SMD RA RoHS : Compliant | 400 : $0.7542 300 : $0.8413 230 : $0.8703 170 : $0.8993 110 : $0.9283 45 : $1.1313
|
| 10,289
 |
B82422H1102K000
| TDK Electronics | FIXED IND 1UH 1.15A 100 MOHM SMD RoHS : Compliant | 1,485 : $0.2026 1,110 : $0.226 860 : $0.2338 625 : $0.2416 405 : $0.2494 165 : $0.3039
|
| 9,743
 |
AD2428BCPZ
| Analog Devices Inc | AUDIO A2B TRANSCEIVR 1CH 32LFCSP / Audio Audio Transceiver 1 Channel 32-LFCSP (5x5) RoHS : Compliant | 35 : $8.6659 26 : $9.6659 21 : $9.9992 15 : $10.3325 10 : $10.6658 4 : $12.9989
|
| 5,000
 |
BTS5242-2L
 | Infineon Technologies AG | Smart High-Side Power Switch RoHS : Compliant | 4 : $86.9254 3 : $96.9553 2 : $100.2986 1 : $103.6419
|
| 5,000
 |
BTS52422LAUMA1
| Infineon Technologies AG | IC PWR SWITCH HISIDE PG-DSO-12-9 | 4 : $86.9254 3 : $96.9553 2 : $100.2986 1 : $103.6419
|
| 4,500
 |
0242.125UR
| Littelfuse Inc | FUSE CARTRIDGE 125MA 250VAC/VDC / 125mA 250 V AC 250 V DC Fuse Cartridge Surface Mount RoHS : Compliant | 221 : $1.3579 166 : $1.5146 128 : $1.5669 93 : $1.6191 60 : $1.6713 25 : $2.0369
|
| 2,000
 |
AD5242BRUZ100
 | Analog Devices Inc | I2C-Compatible, 256-Position Digital Potentiometers | IC DGT POT 100KOHM 256TP 16TSSOP RoHS : Compliant | 77 : $3.93 58 : $4.3834 45 : $4.5346 33 : $4.6857 21 : $4.8369 9 : $5.8949
|
| 1,953
 |
BQ24202DGN
 | Texas Instruments | SINGLE CHIP U-I ONAND LI-POL CHARGE MANAGEMENT IC FOR CURRENT LIMITED APPLICATIONS RoHS : Compliant | 52 : $5.8431 39 : $6.5173 30 : $6.742 22 : $6.9668 14 : $7.1915 6 : $8.7646
|
| 470
 |
ADUM242D0BRWZ
| Analog Devices Inc | DGTL ISO 5000VRMS 4CH GP 16SOIC RoHS : Compliant | 16 : $19.697 12 : $21.9697 9 : $22.7273 7 : $23.4849 5 : $24.2425 2 : $29.5455
|
| 458
 |
 Wuhan P&S | MCS04020D3242BE000
| Vishay Intertechnologies | Precision Thin Film Chip Resistors 32.4 k�� ��0.1% 0.063W RoHS : Compliant | 1 : $0.37 100 : $0.13 500 : $0.12 1,000 : $0.11
|
| 50,000
 |
M24256E-FDW6TP
| STMicroelectronics | EEPROM memory RoHS : Compliant | 1 : $0.91 100 : $0.31 500 : $0.28 1,000 : $0.28
|
| 100
 |