| データシートサーチシステム |
|
27AL-XX-AF5-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() RS | AS138-27A (AS13827AY1) | Caplugs | PLASTIC DUST CAP, SAE AEROSPACE SPECS AS85049/138, 81 ID, AS138 SERIES |
| 4,405 | |
| UE27-AE54-10H | Amphenol Commercial | CONNECTOR USB TERMINAL 4 PHOSPHOR BRONZE GOLD COPPER ALLOY NICKEL PCBS |
| 1,778 | ||
| 19073-0027 (AA-822-56) | Woodhead Molex | AVIKRIMP RING TONGUE TERMINAL FOR 18 TO 22 AWG WIRE STUD SIZE 5/16" (M8) LENG |
| 418 | ||
| 1413227 (ATP-MBK) | Phoenix Contact | PARTITION PLATE TERM BLK GRAY 42.5 MM L 2.5 MM W 41 MM H |
| 254 | ||
| 0423027 (AKG 16 GNYE) | Phoenix Contact | CONN TERM BLK CONNECTION 16 TO 6 AWG 300 V 76 A CONNECTION TERMINAL BLOCK SERIES |
| 155 | ||
| TC127A | Steel City | SET SCREW CONNECTOR, CONCRETE TIGHT, 2.5", ZINC PLATED STEEL |
| 10 | ||
| P27A-BL (026-00999000 | P27A-BL | P27ABL) | Carling Technologies | PUSHBUTTON SWITCH, SP NO, MOMENTARY, 6A 125VAC, SOLDER, P27 SERIES |
| 9 | ||
| PEH200OO427AMB2 (A451QM272M420AV00A) | KEMET Corporation | CAPACITOR, ALUMINUM ELECTROLYTIC, CAP 2700UF, TOL 20%, STUD CAN, 420V, LOW ESR |
| 4 | ||
| 704.002.7A | EAO AG | INDICATOR ACTUATOR, ROUND,29MM, LED ILLUMINATIVE, CLEAR LENS, ALUMINUM BEZEL, SCREW |
| 2 | ||
| VM104527AB213B | Norgren | VALVE, NH4T 5/2 SOL/SPRING |
| 2 | ||
| VM107527AB313B | Norgren | VALVE, NHZU 5/2 SOL/SPR EF PBMO |
| 2 | ||
| V61R427A-A213JB | Norgren | VALVE, AIR, 1/4NPT, 3/2NC, SOL/SPRING, 24VDC |
| 2 | ||
| 2688527 (AXL F AO4 1H) | Phoenix Contact | PLC EXPANSION MODULE, DIGITAL 4 OUTPUTS, 5 VDC, AXIOLINE F SERIES |
| 2 | ||
| 191203.00 (C6T34NK27A) | Leeson | AC MOTOR, WASHDOWN DUTY, 1/2HP..3450RPM.56.TENV.208-230/460V.3PH.60HZ.CONT.40C. |
| 2 | ||
| PN-1327-ACMB | BUD Industries Inc | ENCLOSURE, IP68,NEMA,6P, POLYCARBONATE, CLEARCOVER, MOUNTINGBRACKETS,6.73X4.76X3.15 |
| 1 | ||
![]() Microchip Technology Inc | MCP1727-ADJE/MFVAO | Microchip Technology Inc | 1.5A LOW VOLTAGE LDO, DFN, Projected EOL: 2045-11-08 RoHS : Compliant |
| 10,637 | |
PIC16F627A-E/SO![]() | Microchip Technology Inc | N/A, SOIC, Projected EOL: 2036-05-23 RoHS : Compliant |
| 3,458 | ||
PIC16LF627A-I/P![]() | Microchip Technology Inc | N/A, PDIP, Projected EOL: 2036-03-05 RoHS : Compliant |
| 2,608 | ||
PIC16F627AT-E/SO![]() | Microchip Technology Inc | N/A, SOIC, Projected EOL: 2036-05-23 RoHS : Compliant |
| 2,200 | ||
MCP1827-ADJE/AT![]() | Microchip Technology Inc | 1.5A LDO Regulator, TO-220, Projected EOL: 2036-09-06 RoHS : Compliant |
| 2,100 | ||
PIC16LF627AT-I/SS![]() | Microchip Technology Inc | N/A, SSOP, Projected EOL: 2036-03-05 RoHS : Compliant |
| 1,600 | ||
PIC16LF627AT-I/SO![]() | Microchip Technology Inc | N/A, SOIC, Projected EOL: 2036-03-05 RoHS : Compliant |
| 1,100 | ||
PIC16F627A-I/ML![]() | Microchip Technology Inc | Flash Microcontroller with Comparator, CCP, & USART., VQFN, Projected EOL: 2036-03-05 RoHS : Compliant |
| 764 | ||
PIC16F627A-E/SS![]() | Microchip Technology Inc | N/A, SSOP, Projected EOL: 2036-05-23 RoHS : Compliant |
| 561 | ||
PIC16LF627A-I/SO![]() | Microchip Technology Inc | N/A, SOIC, Projected EOL: 2036-03-05 RoHS : Compliant |
| 491 | ||
| EV04B27A | Microchip Technology Inc | MIC2128 + UCS3205 PD 1HOT, Projected EOL: |
| 258 | ||
PIC16F627AT-I/SS![]() | Microchip Technology Inc | Flash Microcontroller with Comparator, CCP, & USART., SSOP, Projected EOL: 2036-03-05 RoHS : Compliant |
| 72 | ||
| EV68G27A | Microchip Technology Inc | WINCS02 Add-on Board, Projected EOL: |
| 71 | ||
| EV75W27A | Microchip Technology Inc | MCP16701 Socket Board, Projected EOL: |
| 18 | ||
| EV19L27A | Microchip Technology Inc | MCP9604 Thermocouple Eval Bd, Projected EOL: |
| 4 | ||
![]() Rochester Electronics | NZX27A,133![]() | NXP Semiconductors | Zener Diode Single 25.9V 500mW ALF2 Ammo RoHS : Compliant |
| 5,550 | |
| CP7627ATT | Infineon Technologies AG | MM-Legacy PSoC135 |
| 4,500 | ||
OP727ARZ-REEL![]() | Analog Devices Inc | Op Amp Standard 700kHz 8-SOIC T/R RoHS : Compliant |
| 77 | ||
AD627ARZ-RL![]() | Analog Devices Inc | Op Amp Instrumentation 8-SOIC T/R RoHS : Compliant |
| 30 | ||
ADR827ARMZ-REEL7![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 500uV Offset-Max, PDSO10 RoHS : Compliant |
| 16,161 | ||
ADG527ABQ![]() | Analog Devices Inc | Differential Multiplexer, 1 Func, 8 Channel, CMOS, CDIP28 RoHS : Not Compliant |
| 1,755 | ||
ADM6316AY27ARJZ-R7![]() | Analog Devices Inc | Supervisory Circuit 2.7V SOT-23-5 T/R RoHS : Compliant |
| 9,154 | ||
AM29827APC![]() | AMD | Buffer/Line Driver Buffer, Non-Inverting 1 Element 10 Bits 5V 24-DIP RoHS : Not Compliant |
| 23,729 | ||
| ISL12027IV27AZ-T | Intersil Corporation | Real Time Clocks Clock/Calendar I²C 8-SOP T/R RoHS : Compliant |
| 742 | ||
| ISL6527ACBZ | Intersil Corporation | IC VOLT REG Transistor Driver Step-Down Buck 1 OUT 2.97V - 3.63V 14-SOIC Tube RoHS : Compliant |
| 2,408 | ||
X5043PI-2.7A![]() | Intersil Corporation | Supervisory Circuit 2.92V 8-DIP RoHS : Not Compliant |
| 333 | ||
| X5043S8Z-2.7A | Intersil Corporation | Supervisory Circuit 2.92V 8-SOIC Tube RoHS : Compliant |
| 5,051 | ||
| X5168S8Z-2.7A | Intersil Corporation | Voltage Supervisor/Reset IC RoHS : Compliant |
| 234 | ||
| X5043M8IZ-2.7A | Renesas Electronics Corporation | Supervisory Circuit 2.92V 8-SOP Tube RoHS : Compliant |
| 342 | ||
| X5043PI-2.7A | Xicor Inc | Supervisory Circuit 2.92V 8-DIP RoHS : Not Compliant |
| 2,231 | ||
![]() Sager | 27ASL112C3-US | Eaton Bussmann | Specialty Fuses SECTIONALAZING LINK | 0 | ||
| 27ASL40CR5-2 | Eaton Bussmann | Specialty Fuses 27KV 40A ASL-2 SHOT | 0 | |||
| AML27ABK2BC30BA | Honeywell Sensing and Control / MICRO SWITCH | Keylock Switches UNSEALED OI |
| 0 | ||
| P082D-27ABR50K | TT electronics / BI Technologies | Potentiometers |
| 0 | ||
| P082D-27ACR2K | TT electronics / BI Technologies | Potentiometers |
| 0 | ||
| P084D-27AAR200K | TT electronics / BI Technologies | Potentiometers |
| 0 | ||
| YC9Z-RHN27A50P | IDEC Corporation | Contactor Accessories Thermal Overload 37-50A | 0 | |||
| PWR-727A | Murata Power Solutions | Isolated DC/DC Converters - Through Hole | 0 | |||
| AML27ABK2AA23BA | Honeywell Sensing and Control / MICRO SWITCH | Keylock Switches Unsealed OI ADVANCE MAN LINE PB |
| 0 | ||
| 3-3927A-00-0003-R200 | OMRON Electronic Components | Omron | 0 | |||
| PN-1327-ACMB | BUD Industries Inc | IP68 NEMA 6P BOX WITH CLEAR COVER AND MOUNTING BRACKETS (6.7 X 4.8 X 3.2 IN) |
| 0 | ||
| P082D-27ABR200K | TT electronics / BI Technologies | Potentiometers |
| 0 | ||
| P27A-RD/POLY | Carling Technologies | Pushbutton Switches P27ARD/POLY |
| 0 | ||
| 3-3927A-00-0007-A200 | OMRON Electronic Components | Omron | 0 | |||
| P082D-27ACR1K | TT electronics / BI Technologies | Potentiometers |
| 0 | ||
![]() TME | 1.5KE27A-E3/54 | Vishay Intertechnologies | Diode: TVS; 1.5kW; 27.05V; 40A; unidirectional; DO201; TransZorb® RoHS : Compliant |
| 1,023 | |
| 18127A562JAT1A | KYOCERA Corporation | Capacitor: ceramic; 5.6nF; 500V; C0G (NP0); ±5%; SMD; 1812 |
| 400 | ||
| 27 AT5 32-200ZA | OPTIBELT GmbH | Belt pulley; AT5; W: 16mm; whell width: 27mm; Ø: 49.7mm; aluminium |
| 7 | ||
| 05-27-A-0127-A-4-06-4-T-HF | Global Connector Technology | FFC tape; tinned; 500mA; 60V; Tape ph: 0.5mm; Cores: 27; L: 127mm |
| 0 | ||
| 05-27-A-0127-A-4-06-4-T | Global Connector Technology | FFC tape; tinned; 500mA; 60V; FFC5-TIN; Tape ph: 0.5mm; Cores: 27 RoHS : Compliant |
| 0 | ||
| 05-27-A-0127-A-4-06-4-G | Global Connector Technology | FFC tape; gold-plated; 500mA; 60V; Tape ph: 0.5mm; Cores: 27 RoHS : Compliant |
| 0 | ||
| 05-05-A-0127-A-4-06-4-G | Global Connector Technology | FFC tape; gold-plated; 500mA; 60V; Tape ph: 0.5mm; Cores: 5; L: 127mm RoHS : Compliant |
| 0 | ||
| 05-06-D-0127-A-4-06-4-T-HF | Global Connector Technology | FFC tape; tinned; 500mA; 60V; Tape ph: 0.5mm; Cores: 6; L: 127mm |
| 0 | ||
| 05-15-A-0127-A-4-06-4-G | Global Connector Technology | FFC tape; gold-plated; 500mA; 60V; Tape ph: 0.5mm; Cores: 15 RoHS : Compliant |
| 0 | ||
| 05-25-A-0127-A-4-06-4-G | Global Connector Technology | FFC tape; gold-plated; 500mA; 60V; Tape ph: 0.5mm; Cores: 25 RoHS : Compliant |
| 0 | ||
| 05-27-A-0228-A-4-06-4-G | Global Connector Technology | FFC tape; gold-plated; 500mA; 60V; Tape ph: 0.5mm; Cores: 27 RoHS : Compliant |
| 0 | ||
| 05-29-A-0127-A-4-06-4-T | Global Connector Technology | FFC tape; tinned; 500mA; 60V; FFC5-TIN; Tape ph: 0.5mm; Cores: 29 RoHS : Compliant |
| 0 | ||
| 05-31-D-0127-A-4-06-4-T-HF | Global Connector Technology | FFC tape; tinned; 500mA; 60V; Tape ph: 0.5mm; Cores: 31; L: 127mm |
| 0 | ||
| 05-45-A-0127-A-4-06-4-G | Global Connector Technology | FFC tape; gold-plated; 500mA; 60V; Tape ph: 0.5mm; Cores: 45 RoHS : Compliant |
| 0 | ||
| 05-11-A-0127-A-4-06-4-T | Global Connector Technology | FFC tape; tinned; 500mA; 60V; FFC5-TIN; Tape ph: 0.5mm; Cores: 11 RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | NSSM227AT | AVAILABLE EU | 2,621 | |||
| 835827A | WINGAIN MACHINERY AND ELE | AVAILABLE EU | 19,915 | |||
![]() ComSIT USA | MC33464N27ATR | Motorola Semiconductor Products | Power Management Circuit, Fixed, +2.7VV, CMOS, PDSO5 RoHS : Not Compliant | 181,083 | ||
| VJ9127A471FXAMY22 | Vishay Intertechnologies | Electronic Component RoHS : Not Compliant | 38,680 | |||
| SMA27AE361T | Vishay Intertechnologies | Surface-Mount TRANSZORB Transient Voltage Suppressor Trans Voltage Suppressor Diode, 400W, 23.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC RoHS : Compliant | 9,000 | |||
| HC027A | Taimag Corp | Electronic Component RoHS : Compliant | 3,865 | |||
| 15SMC27AT3G | onsemi | Electronic Component RoHS : Compliant | 3,615 | |||
AM29C827AJC![]() | AMD | 10-BIT DRIVER Bus Driver, CMOS Series, 1-Func, 10-Bit, True Output, CMOS, PQCC28 RoHS : Not Compliant | 2,678 | |||
| UE27AE5410H | TE Connectivity | UNIVERSAL SERIAL BUS RECEPTACLE, STRAIGHT PCB TAIL, VERTICAL MOUNT USB Connector, 4 Contact(s), Female, Straight, Solder Terminal, Locking, Receptacle RoHS : Compliant | 2,200 | |||
| MAX16927AGTMV+GA | Maxim Integrated Products | Electronic Component RoHS : Compliant | 875 | |||
| AT25020NSI27A | Atmel Corporation | Electronic Component RoHS : Not Compliant | 389 | |||
| TC90527AFGCBSDR | Toshiba America Electronic Components | Electronic Component RoHS : Compliant | 100 | |||
| DS90LV027ATM | National Semiconductor Corporation | LVDS DUAL HIGH SPEED DIFFERENTIAL DRIVER Line Driver, 2 Func, 2 Driver, CMOS, PDSO8 RoHS : Not Compliant | 85 | |||
| XRD9827ACUF | Exar Corporation | 12-BIT LINEAR CIS/CCD SENSOR SIGNAL PROCESSOR WITH SERIAL CONTROL Analog Circuit, 1 Func, CMOS, PDSO20 RoHS : Not Compliant | 58 | |||
| 74LVC827AQ | Integrated Device Technology Inc | Buffer/Line Driver Buffer, Non-Inverting 1 Element 10 Bits 1.5V, 1.8V, 2.5V, 3.3V 24-SOP Tube RoHS : Not Compliant | 55 | |||
| X5043S8IZ27A | Intersil Corporation | 4K, 512 x 8 Bit CPU Supervisor with 4K SPI EEPROM Power Supply Management Circuit, Fixed, 1 Channel, +4.38V, CMOS, PDSO8 RoHS : Compliant | 40 | |||
ADG527AKPZ![]() | Analog Devices Inc | CMOS LATCHED 8 CHANNEL ANALOG MULTIPLEXER Differential Multiplexer, 1 Func, 8 Channel, CMOS, PQCC28 RoHS : Compliant | 20 | |||
![]() Interstate Connecting Components | MS3402D20-27A | Conesys | CONNECT BOX MT RCPT |
| 84 | |
| MLDM2L-21S-4K5-18M-527A | Glenair Inc | LOW PROFILE MICRO-D |
| 1 | ||
| 260-002-72ZR20-27A | Glenair Inc | 0 | ||||
| 260-002-74NF20-27A | Glenair Inc | 0 | ||||
| M85049/3Z27A1 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S | 0 | |||
| WWRF-27-AMTR-B | Amphenol Industrial Operations | 0 | ||||
| MS3454W22-7A | Amphenol Aerospace | RECEPT 3454W227A | 0 | |||
| MS3188B27A | Glenair Inc | ENVIRONMENTAL ADAPTER | 0 | |||
| MS3406D20-27AX | Conesys | CONNECT STRT PLUG |
| 0 | ||
| MS3454W20-27A | Amphenol Aerospace | RECEPT 3454W2027A | 0 | |||
| 260-002-75ZR20-27A | Glenair Inc | 0 | ||||
| D38999/20TG27AN | Glenair Inc | RoHS : Compliant | 0 | |||
| D38999/24FG27AB | Glenair Inc | RoHS : Compliant | 0 | |||
| 803-001-06M12-7AY | Glenair Inc | RoHS : Compliant | 0 | |||
| 803-003-02ZN12-7AN | Glenair Inc | 0 | ||||
![]() PEI Genesis | 4B69142-127A | SOURIAU-SUNBANK |
| 0 | ||
| 27A075 | SOURIAU-SUNBANK |
| 0 | |||
| SE27A1905S-2.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| MS3437C127A | SOURIAU-SUNBANK |
| 0 | |||
| WA27AS | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| MS3188B27A | SOURIAU-SUNBANK |
| 0 | |||
| J827-A8A-14-34 | SOURIAU-SUNBANK |
| 0 | |||
| CT6FA22-22SS-F127-A206 | ITT Interconnect Solutions |
| 0 | |||
| CA3102E18-12SF127A206 | ITT Interconnect Solutions |
| 0 | |||
| CT6E16-11SSF127A232 | ITT Interconnect Solutions |
| 0 | |||
| 127A757-2 | Filconn |
| 0 | |||
| 09A1027A12N | SOURIAU-SUNBANK |
| 0 | |||
| MS3188A27A | SOURIAU-SUNBANK |
| 0 | |||
| UE27AE5410H | Amphenol Corporation |
| 0 | |||
| WA27AF | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
![]() PUI | P6KE27A-G | 3,000 | ||||
![]() Chip 1 Exchange | MC33464N27ATR | INSTOCK | 20,999 | |||
| 1.5SMC27AT3 | Motorola Semiconductor Products | INSTOCK RoHS : Not Compliant | 8,978 | |||
| SQ3427AEEV-T1_GE3 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 3,397 | |||
| P6KE27A-G | Comchip Technology Corporation Ltd | INSTOCK RoHS : Compliant | 3,000 | |||
| B41827A5227M | TDK Electronics | INSTOCK | 3,000 | |||
| 744761127A | INSTOCK | 2,100 | ||||
| DS90LV027ATM | INSTOCK | 1,375 | ||||
| S-80127ANMC-JCMT2G | INSTOCK | 789 | ||||
| 74FCT827AT50 | INSTOCK | 493 | ||||
| SN74ALS27AD | INSTOCK | 350 | ||||
| B03524DE27AA | SMSC | INSTOCK | 211 | |||
| 227AXZ035M | Knowles CDE | INSTOCK RoHS : Compliant | 100 | |||
| B25667-A3127A375 | INSTOCK | 6 | ||||
| B25667-A3127A375 | TDK Electronics | INSTOCK | 5 | |||
| B32526R0227A000 | TDK Electronics | INSTOCK RoHS : Compliant | 3 | |||
![]() Avnet Abacus | UE27-AE54-100 | Amphenol Corporation | USB Connector USB Type A USB 20 Receptacle 4 Ways PCB Mount Vertical (Alt: UE27-AE54-100) RoHS : Compliant | 14,760 | ||
| ECS-327ATQMV-AS-TR | ECS International Inc | Oscillator 32768 kHz 100 ppm SMD 32mm x 25mm 33 V CMOS ECS327ATQMV - Tape and Reel (Alt: ECS-327ATQMV-AS-TR) RoHS : Compliant | 6,000 | |||
| UE27-AC54-10H | Amphenol Corporation | USB Connector USB Type A USB 20 Receptacle 4 Positions Through Hole Mount Right Angle (Alt: UE27-AC54-10H) RoHS : Compliant | 4,800 | |||
| B43727A9109M600 | TDK Corporation | Electrolytic Capacitor 001 F 400 V 20 Screw 12000 hours 85C Polar B43727 Series (Alt: B43727A9109M600) RoHS : Not Compliant | 112 | |||
| P4KE27A/B | YAGEO Corporation | (Alt: P4KE27A/B) RoHS : Compliant | 0 | |||
| 1.5KE27A/B | YAGEO Corporation | (Alt: 1.5KE27A/B) RoHS : Compliant | 0 | |||
| B41827A3478M | TDK Corporation | 4700UF 10V 125x25 Single Ended (Alt: B41827A3478M000) RoHS : Compliant | 0 | |||
| 1.0SMB27A/TR7 | YAGEO Corporation | (Alt: 1.0SMB27A/TR7) RoHS : Compliant | 0 | |||
| UE27-AC54-100 | Amphenol Corporation | (Alt: UE27-AC54-100) RoHS : Compliant | 0 | |||
| KB827A-B (SMD) | Kingbright | KINKB827AB SMD (Alt: KB827A-B (SMD)) RoHS : Compliant | 0 | |||
18127A102JAT2A![]() | Kyocera AVX Components | SMD Multilayer Ceramic Capacitor 1000 pF 500 V 1812 4532 Metric 5 C0G NP0 45 mm - Tape and Reel (Alt: KGM43BCG2H102JV) RoHS : Compliant | 0 | |||
| MDF27A-1416PCF | Hirose Electric Co Ltd | Contact PL Crimp RA ThruHole TR (Alt: CL0547-0296-3-00) RoHS : Compliant | 0 | |||
| 1.5SMC27A-AT/13 | YAGEO Corporation | 15SMC DO214AB 231V 375V AUTO Reel 13 (Alt: 1.5SMC27A-AT/13) RoHS : Compliant | 0 | |||
| P4SMA27A-AT/TR13 | YAGEO Corporation | (Alt: P4SMA27A-AT/TR13) RoHS : Compliant | 0 | |||
| POS300JT-77-R27AA | Vitrohm Portuguesa LDA | Resistor 270 Milliohms 5 3 W Axial Leaded Metal Oxide Power - Tape and Reel (Alt: POS300JT-77-R27AA) RoHS : Compliant | 0 | |||
![]() Avnet Asia | UE27-AC54-100 | Amphenol Corporation | (Alt: UE27-AC54-100) RoHS : Compliant |
| 3,600 | |
| UE27-AE54-100 | Amphenol Corporation | USB Connector, USB Type A, USB 2.0, Receptacle, 4 Ways, PCB Mount, Vertical (Alt: UE27-AE54-100) RoHS : Compliant | 0 | |||
| 10-EZ12PMA010SC-L927A08T | MACOM | (Alt: 10-EZ12PMA010SC-L927A08T) RoHS : Compliant | 0 | |||
R5F1027AANA#W0![]() | Renesas Electronics Corporation | (Alt: R5F1027AANA#W0) RoHS : Compliant | 0 | |||
| R5F1027AGNA#05 | Renesas Electronics Corporation | MCU 16-Bit RL78 CISC 16KB Flash 1.8V to 5.5V 24-Pin HWQFN Tray (Alt: R5F1027AGNA#05) RoHS : Compliant | 0 | |||
| PESD1IVN27A-QX | Nexperia | (Alt: PESD1IVN27A-QX) RoHS : Compliant | 0 | |||
| ECS-327ATQMV-AS-TR | ECS International Inc | (Alt: ECS-327ATQMV-AS-TR) RoHS : Compliant | 0 | |||
| UE27AE5410H | Amphenol Corporation | (Alt: UE27AE5410H) RoHS : Compliant | 0 | |||
18127A472JAT2A![]() | Kyocera AVX Components | R102 HIGH VOLT (Alt: 18127A472JAT2A) RoHS : Compliant | 0 | |||
| G8327A038 | Diodes Incorporated | Crystal, Tuning Fork, 32.768 kHz, SMD, 3.2mm x 1.5mm x 0.9mm, G8 (Alt: G8327A038) RoHS : Compliant | 0 | |||
| UE27-AE54-10H | Amphenol Corporation | (Alt: UE27-AE54-10H) RoHS : Compliant | 0 | |||
| FMB2227A | onsemi | NPN & PNP Complementary Dual Transistor. (Alt: FMB2227A) RoHS : Compliant |
| 0 | ||
| SR227A3R3CAR | Kyocera AVX Components | SKYCAPS (Alt: SR227A3R3CAR) RoHS : Compliant | 0 | |||
| UE27AE54100 | Amphenol Corporation | (Alt: UE27AE54100) RoHS : Compliant | 0 | |||
| UE27AC54100 | Amphenol Corporation | (Alt: UE27AC54100) RoHS : Compliant | 0 | |||
![]() Pasternack Enterprises US | PE7627A-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.6 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 25 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, TNC Male to TNC Female Black Anodized Aluminum Body Rated to 25 Watts Up to 6 GHz. PE7627A-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7627A-10 in-series fixed attenuator is available with a typical attenuation accuracy of 0.6 dB. The max input power rating (CW) of this RF attenuator is 25 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7627A-10 attenuator is rated for maximum frequency up to 6 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 10 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7627A-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | |
| PE7627A-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 0.6 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 25 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, TNC Male to TNC Female Black Anodized Aluminum Body Rated to 25 Watts Up to 6 GHz. PE7627A-3 is a 3 dB fixed attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7627A-3 in-series fixed attenuator is available with a typical attenuation accuracy of 0.6 dB. The max input power rating (CW) of this RF attenuator is 25 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7627A-3 attenuator is rated for maximum frequency up to 6 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 3 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7627A-3 will ship the same business day as purchased from Pasternack’s production facility. This 3 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7627A-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 0.8 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 25 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, TNC Male to TNC Female Black Anodized Aluminum Body Rated to 25 Watts Up to 6 GHz. PE7627A-40 is a 40 dB fixed attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7627A-40 in-series fixed attenuator is available with a typical attenuation accuracy of 0.8 dB. The max input power rating (CW) of this RF attenuator is 25 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 40 dB. The Pasternack PE7627A-40 attenuator is rated for maximum frequency up to 6 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 40 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7627A-40 will ship the same business day as purchased from Pasternack’s production facility. This 40 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7627A-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 6 dB, Attenuation Accuracy, Typ: 0.6 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 25 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, TNC Male to TNC Female Black Anodized Aluminum Body Rated to 25 Watts Up to 6 GHz. PE7627A-6 is a 6 dB fixed attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7627A-6 in-series fixed attenuator is available with a typical attenuation accuracy of 0.6 dB. The max input power rating (CW) of this RF attenuator is 25 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 6 dB. The Pasternack PE7627A-6 attenuator is rated for maximum frequency up to 6 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 6 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7627A-6 will ship the same business day as purchased from Pasternack’s production facility. This 6 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7627A-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 0.65 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 25 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, TNC Male to TNC Female Black Anodized Aluminum Body Rated to 25 Watts Up to 6 GHz. PE7627A-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7627A-30 in-series fixed attenuator is available with a typical attenuation accuracy of 0.65 dB. The max input power rating (CW) of this RF attenuator is 25 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7627A-30 attenuator is rated for maximum frequency up to 6 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 30 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7627A-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7627A-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 0.65 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 25 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, TNC Male to TNC Female Black Anodized Aluminum Body Rated to 25 Watts Up to 6 GHz. PE7627A-20 is a 20 dB fixed attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7627A-20 in-series fixed attenuator is available with a typical attenuation accuracy of 0.65 dB. The max input power rating (CW) of this RF attenuator is 25 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 20 dB. The Pasternack PE7627A-20 attenuator is rated for maximum frequency up to 6 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 20 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7627A-20 will ship the same business day as purchased from Pasternack’s production facility. This 20 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
![]() Wuhan P&S | P6SMB27A![]() | Littelfuse Inc | TVS Diodes RoHS : Compliant |
| 72,000 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |