| データシートサーチシステム |
|
2LFS 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() TME | D6C40F2LFS | Littelfuse Inc | -20÷85°C; THT; D6; Leads: for soldering; 12x11.4x14.8mm; 2.5N RoHS : Compliant |
| 7,604 | |
| D6L90F2LFS | Littelfuse Inc | -20÷85°C; THT; D6; Leads: for soldering; 12x11.8x11.6mm; 2.5N RoHS : Compliant |
| 2,800 | ||
| PTS125SJM73-2 LFS | C&K Switches | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/12VDC; THT; none; 1.6N |
| 2,357 | ||
| BH3B-XH-2(LF)(SN) | JST Manufacturing | Connector: wire-board; XH; plug; male; data; Inom: 3A; 250V; PIN: 3 RoHS : Compliant |
| 1,115 | ||
| S02B-PASK-2(LF)(SN)(P) | JST Manufacturing | Connector: wire-board; data; PIN: 2; shrouded; angled; soldering |
| 950 | ||
| PTS645SK952 LFS | C&K Switches | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/12VDC; THT; none; 2.6N |
| 920 | ||
| D6R40F2LFS | Littelfuse Inc | Red; none; THT; Leads: for soldering; Switch.method: OFF-(ON); D6 RoHS : Compliant |
| 131 | ||
| PTS525SK08SMTR2 LFS | C&K Switches | Microswitch TACT; SPST-NO; Pos: 2; 0.02A/15VDC; SMT; none; 2.5N |
| 129 | ||
| PTS641SM25SMTR2 LFS | C&K Switches | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/12VDC; SMT; 1.6N; 2.5mm |
| 0 | ||
| KSL0M312 LFS | C&K Switches | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/32VDC; THT; none; 1.4N |
| 0 | ||
| KSA0M212 LFS | C&K Switches | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/32VDC; THT; none; 1.4N |
| 0 | ||
| KSC441J ST2 LFS | C&K Switches | Microswitch TACT; SPST; Pos: 2; 0.05A/32VDC; SMD; 3.5N; 5.2mm; KSC |
| 0 | ||
| KSC461G ST2 LFS | C&K Switches | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/32VDC; SMT; none; 6.25N |
| 0 | ||
| PTS125SJM73SMTR2LFS | C&K Switches | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/12VDC; SMT; none; 1.6N RoHS : Compliant |
| 0 | ||
| PTS645SK13SMTR92 LFS | C&K Switches | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/12VDC; SMT; none; 2.6N |
| 0 | ||
![]() Avnet Americas | TCR3DM12,LF(SE | Toshiba America Electronic Components | - Tape and Reel (Alt: TCR3DM12,LF(SE) RoHS : Compliant |
| 0 | |
| TCR3DM32,LF(SE | Toshiba America Electronic Components | - Tape and Reel (Alt: TCR3DM32,LF(SE) RoHS : Compliant |
| 0 | ||
| TCR2LN12,LF(SE | Toshiba America Electronic Components | - Tape and Reel (Alt: TCR2LN12,LF(SE) RoHS : Compliant |
| 0 | ||
| TCR2EN12,LF(SE | Toshiba America Electronic Components | - Tape and Reel (Alt: TCR2EN12,LF(SE) RoHS : Compliant |
| 0 | ||
| TCR2EN32,LF(SE | Toshiba America Electronic Components | - Tape and Reel (Alt: TCR2EN32,LF(SE) RoHS : Compliant |
| 0 | ||
| TCR2LN32,LF(SE | Toshiba America Electronic Components | - Tape and Reel (Alt: TCR2LN32,LF(SE) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | PTS645SK43SMTR92 LFS | C&K Switches | Tactile Switches 6 mm Tact Switches RoHS : Compliant |
| 87,112 | |
| TCR2LN12,LF(SE | Toshiba America Electronic Components | LDO Voltage Regulators SDFN4 CMOS LDO REGULATOR Vout=1.2V I=200mA F=1MHz RoHS : Compliant |
| 76,298 | ||
| B2B-XH-2(LF)(SN) | JST Manufacturing | Headers & Wire Housings XH HEADER (TOP) RoHS : Compliant |
| 29,659 | ||
| S04B-PASK-2(LF)(SN) | JST Manufacturing | Headers & Wire Housings PA HEADER (SIDE) RoHS : Compliant |
| 23,868 | ||
| PTS645SM43-2 LFS | C&K Switches | Tactile Switches PTS645SM43-2 LFS RoHS : Compliant |
| 18,795 | ||
| TCR3DM32,LF(SE | Toshiba America Electronic Components | LDO Voltage Regulators Low Dropout (LDO) Linear Voltage Regulator Iout: 300mA Pd: 420mW Vin: 6V Vout:3.2V RoHS : Compliant |
| 17,024 | ||
| S05B-PASK-2(LF)(SN) | JST Manufacturing | Headers & Wire Housings PA HEADER (SIDE) RoHS : Compliant |
| 14,868 | ||
| PTS641 TM31 SMTR2 LFS | C&K Switches | Tactile Switches |
| 13,633 | ||
| PTS645SM70-2 LFS | C&K Switches | Tactile Switches PTS645SM70-2 LFS RoHS : Compliant |
| 12,175 | ||
| PTS645SJM73-2 LFS | C&K Switches | Tactile Switches PTS645SJM73-2 LFS RoHS : Compliant |
| 9,401 | ||
| S03B-PASK-2(LF)(SN) | JST Manufacturing | Headers & Wire Housings PA HEADER (SIDE) RoHS : Compliant |
| 8,891 | ||
| BH2B-XH-2(LF)(SN) | JST Manufacturing | Headers & Wire Housings XH HEADER (TOP) RoHS : Compliant |
| 1,366 | ||
| S12B-PASK-2(LF)(SN) | JST Manufacturing | Headers & Wire Housings PA HEADER (SIDE) RoHS : Compliant |
| 871 | ||
| LF-SNSR-ETH-EVN | Lattice Semiconductor Corporation | Programmable Logic IC Development Tools CertusPro-NX Sensor to Ethernet Bridge Board RoHS : Compliant |
| 22 | ||
| LF-SNSR-ETH-EVK-EVN | Lattice Semiconductor Corporation | Programmable Logic IC Development Tools CertusPro-NX Sensor to Ethernet Bridge Board Holoscan Kit |
| 15 | ||
![]() Newark | TCR3DM12,LF(SE | Toshiba America Electronic Components | Ldo, Fixed, 1.2V, 0.3A, -40 To 85Deg C; |Toshiba TCR3DM12,LF(SE RoHS : Compliant |
| 20,000 | |
| PTS645SK73JSMTR92LFS | C&K Switches | Tactile Switch, 0.05A, 12Vdc, 260Gf, Smd; |C&k Components PTS645SK73JSMTR92LFS RoHS : Compliant |
| 19,506 | ||
| PTS645SJM73JSMTR92LFS | C&K Switches | Tactile Switch, 0.05A, 12Vdc, 160Gf, Smd; |C&k Components PTS645SJM73JSMTR92LFS RoHS : Compliant |
| 13,621 | ||
| TCR3DM12,LF(SE | Toshiba America Electronic Components | Ldo, Fixed, 1.2V, 0.3A, -40 To 85Deg C; |Toshiba TCR3DM12,LF(SE RoHS : Compliant |
| 10,000 | ||
| TCR3DM12,LF(SE | Toshiba America Electronic Components | Ldo, Fixed, 1.2V, 0.3A, -40 To 85Deg C; |Toshiba TCR3DM12,LF(SE RoHS : Compliant |
| 10,000 | ||
| PTS645SJM73JSMTR92LFS | C&K Switches | Tactile Sw, Square Button, Top Actuated; Available Until Stocks Are Exhausted Alternative Available |C&k Components PTS645SJM73JSMTR92LFS RoHS : Compliant |
| 6,445 | ||
| PTS645SK73JSMTR92LFS | C&K Switches | Tactile Switch, 0.05A, 12Vdc, 260Gf, Smd; Available Until Stocks Are Exhausted Alternative Available |C&k Components PTS645SK73JSMTR92LFS RoHS : Compliant |
| 5,599 | ||
| PTS645VL58-2 LFS | C&K Switches | Tactile Switch, 0.05A, 12Vdc, 130Gf, Tht; |C&k Components PTS645VL58-2 LFS RoHS : Compliant |
| 4,257 | ||
| PTS525SK15SMTR2 LFS | C&K Switches | Tactile Switch, Spst, 0.02A, 15Vdc, Smd; |C&k Components PTS525SK15SMTR2 LFS RoHS : Compliant |
| 3,820 | ||
| PTS525SK15SMTR2 LFS | C&K Switches | Tactile Switch, Spst, 0.02A, 15Vdc, Smd; |C&k Components PTS525SK15SMTR2 LFS RoHS : Compliant |
| 3,820 | ||
| PTS525 SM08 SMTR2 LFS | C&K Switches | Tact; Available Until Stocks Are Exhausted Alternative Available |C&k Components PTS525 SM08 SMTR2 LFS RoHS : Not Compliant |
| 3,000 | ||
| PTS525 SM08 SMTR2 LFS | C&K Switches | Tact; Available Until Stocks Are Exhausted Alternative Available |C&k Components PTS525 SM08 SMTR2 LFS RoHS : Not Compliant |
| 3,000 | ||
| PTS525SM08SMTR2 LFS | C&K Switches | Tactile Switch, Spst, 0.02A, 15Vdc, Smd; |C&k Components PTS525SM08SMTR2 LFS RoHS : Compliant |
| 1,997 | ||
| PTS645SK70SMTR92 LFS | C&K Switches | Tactile Switch, 0.05A, 12Vdc, 260Gf, Smd; Product Range:Pts645 Series; Actuator Orientation:Top Actuated; Switch Mounting:Surface Mount; Actuator Style:Round Button; Actuating Force:260Gf; Contact Rating:50Ma At 12Vdc; Ip Rating:- Rohs Compliant: Yes RoHS : Compliant |
| 690 | ||
| D6L90 F2 LFS | C&K Switches | Pb Keyboard Sw, Spst, 0.1A, 32Vdc, Black; Switch Operation:Off-(On); Contact Configuration:Spst-No; Contact Voltage Ac Nom:-; Contact Voltage Dc Nom:32V; Contact Current Max:100Ma; Switch Terminals:Pc Pin; Product Range:D6 Series Rohs Compliant: Yes RoHS : Compliant |
| 421 | ||
![]() RS | PTS645SM43SMTR92 LFS | C&K Switches | SWITCH;TACTILE;SPST-NO;OFF-MOM;TOP ACTUATOR;160 GRAMS;4.3MM;.05A;12VDC;GULL WING |
| 9,215 | |
| PTS645SK43SMTR92 LFS | C&K Switches | SWITCH;TACTILE;SPST-NO;OFF-MOM;TOP ACTUATOR;260 GRAMS;4.3MM;.05A;12VDC;GULL WING |
| 683 | ||
| PTS525SM15SMTR2 LFS | C&K Switches | SWITCH;TACTILE;SPST-NO;OFF-MOM;TOP ACT;SURFACE MNT;4.3MM;0.02A;15VDC;GULL WING |
| 170 | ||
| 772LFSS1/4X1/4 | Brennan Industries | BRANCH TEE, SS316 F FITTING, 1/4 IN X 1/4 IN X F NPT 1/4 IN, HAM-LET |
| 0 | ||
| HP2LFSAFSA0605 | Amphenol Commercial | HP2 FSA TO FSA L=605MM |
| 0 | ||
| 772LFSS1/8X1/8 | Brennan Industries | BRANCH TEE, SS316 F FITTING, 1/8 IN X 1/8 IN X F NPT 1/8 IN, HAM-LET |
| 0 | ||
| 772LFSS10MMX1/4 | Brennan Industries | BRANCH TEE, SS316 F FITTING,10MM X 10MM X F NPT 1/4 IN, HAM-LET |
| 0 | ||
| 772LFSS12MMX1/4 | Brennan Industries | BRANCH TEE, SS316 F FITTING,12MM X 12MM X F NPT 1/4 IN, HAM-LET |
| 0 | ||
| PTS645TL50-2 LFS | C&K Switches | SWITCH, TACT, SPST-NO, OFF-MOM, TOP ACTUATED,5.00MM ACT,0.05A,12VDC, THRUHOLE, PC PIN |
| 0 | ||
| 772LFSS6MMX1/4OC | Brennan Industries | BRANCH TEE, SS316 F, 6MM X M NPT 6MM X 1/4 IN, O2 CLEAN, HAM-LET |
| 0 | ||
| 772LFSS1/4X1/4LF | Brennan Industries | BRANCH TEE, SS316 F, 1/4 INXM NPT 1/4 IN X 1/4 IN, LUBE FREE, HAM-LET |
| 0 | ||
| 772LFSS12MMX1/4OC | Brennan Industries | BRANCH TEE, SS316 F,12MM X M NPT 12MM X 1/4 IN, O2 CLEAN, HAM-LET |
| 0 | ||
| PTS645SH50SMTR92 LFS | C&K Switches | SWITCH;TACTILE;SPST-NO;OFF-MOM;TOP ACTUATOR;200 GRAMS;4.3MM;.05A;12VDC;GULL WING |
| 0 | ||
| PTS 647 SN50 SMTR2 LFS | C&K Switches | SWITCH;TACTILE;100 GRAM ACTUATION FORCE;4.5 X 4.5MM;5.0MM HEIGHT;12VDC;50MA;REEL |
| 0 | ||
| PTS 647 SK38 SMTR2 LFS | C&K Switches | SWITCH;TACTILE;250 GRAM ACTUATION FORCE;4.5 X 4.5MM;3.8MM HEIGHT;12VDC;50MA;REEL |
| 0 | ||
![]() Bisco Industries | PTS645SM502LFS | MISC. SWITCHES | 11 | |||
![]() Onlinecomponents.com | PTS645SL43-2LFS | C&K Switches | 6 mm Tact Switches RoHS : Compliant |
| 9,650 | |
| PTS667SK110-2LFS | C&K Switches | Tact |C&k Components PTS667SK110-2LFS RoHS : Compliant |
| 0 | ||
| SMB3528-2LF | Gowanda Electronics Corporation | RoHS : Compliant |
| 0 | ||
| PTS645TH70-2LFS | C&K Switches | 6 mm Tact Switches RoHS : Compliant |
| 0 | ||
| PTS645VJL61-2LFS | C&K Switches | Switch Tactile N.O. SPST Square Button PC Pins 1.27N Bracket Mount/Through Hole RoHS : Compliant |
| 0 | ||
| PTS645SJL73-2LFS | C&K Switches | Tactile RoHS : Compliant |
| 0 | ||
| GP3010-2LF | Gowanda Electronics Corporation | RoHS : Compliant |
| 0 | ||
| PTS125SK43PSMTR-2LFS | C&K Switches | Tactile RoHS : Compliant |
| 0 | ||
| PTS645VJM61-2LFS | C&K Switches | Tactile RoHS : Compliant |
| 0 | ||
| PTS645TK50-2LFS | C&K Switches | 6 mm Tact Switches RoHS : Compliant |
| 0 | ||
| PTS645TH50-2LFS | C&K Switches | 6 mm Tact Switches RoHS : Compliant |
| 0 | ||
| PTS645VM39-2LFS | C&K Switches | 6 mm Tact Switches RoHS : Compliant |
| 0 | ||
| PTS125SM43PSMTR-2LFS | C&K Switches | Tactile RoHS : Compliant |
| 0 | ||
| PTS125SM85PSMTR-2LFS | C&K Switches | Tactile RoHS : Compliant |
| 0 | ||
| 10167521-2LF | Amphenol FCi | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | TCR3DG12,LF(S | Toshiba America Electronic Components | Fixed Positive LDO Regulator |
| 110,000 | |
| TCR3DG32,LF(S | Toshiba America Electronic Components | Low Dropout (LDO) Linear Voltage Regulator |
| 50,000 | ||
| TCR3DM32,LF(S | Toshiba America Electronic Components | TCR3DM32 - Low Dropout (LDO) Linear Voltage Regulator |
| 90,000 | ||
![]() Sager | PTS645SL432LFS | C&K Switches | Tactile Switches SWITCH TACTILE RoHS : Compliant |
| 12 | |
| PTS526SK17SMTR2LFS | C&K Switches | Tactile Switches 5.20 x 5.20 Tact Switch for SMT |
| 0 | ||
| PTS645SL502LFS | C&K Switches | Tactile Switches SWITCH TACTILE RoHS : Compliant |
| 0 | ||
| PTS645VJM612LFS | C&K Switches | Tactile Switches PTS645VJM61-2 LFS RoHS : Compliant | 0 | |||
| PTS847MM350SMTR2LFS | C&K Switches | Tactile Switches SWITCH TACTILE RoHS : Compliant |
| 0 | ||
| PTS125SJK73SMTR2LFS | C&K Switches | Tactile Switches 50mA 12VDC, 250gf 7.3mm Sqr Act SnapIn RoHS : Compliant |
| 0 | ||
PTS645SH70SMTR92LFS![]() | C&K Switches | Tactile Switches 6 mm Tact Switches RoHS : Compliant |
| 0 | ||
PTS645SM95SMTR92LFS![]() | C&K Switches | Tactile Switches 50mA 12VDC 160gf .374mm thru-hole/SMT RoHS : Compliant |
| 0 | ||
| PTS645TH702LFS | C&K Switches | Tactile Switches PTS645TH70-2 LFS RoHS : Compliant | 0 | |||
| PTS645VM312LFS | C&K Switches | Tactile Switches PTS645VM31-2 LFS RoHS : Compliant |
| 0 | ||
| PTS645VSM19PSMTR92LFS | C&K Switches | Tactile Switches RoHS : Compliant |
| 0 | ||
KSC441GST2LFS![]() | C&K Switches | Tactile Switches 30Db 340Gf Gullwing RoHS : Compliant |
| 0 | ||
| D6R40F2LFS | C&K Switches | Pushbutton Switches Key Switch N.O. SPDT 100 mA RoHS : Compliant |
| 0 | ||
| PTS526SM20SMTR2LFS | C&K Switches | Tactile Switches 5.20 x 5.20 Tact Switch for SMT |
| 0 | ||
PTS641SP34SMTR2LFS![]() | C&K Switches | Tactile Switches SMT Top Actuated Switches RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | PTS645SM13SMTR92LFS | CK tools | 6 MM TACT SWITCH Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 1.57N, Solder Terminal, Surface Mount-straight RoHS : Compliant | 10,000 | ||
| B2P3VB2LFSN | JST Manufacturing | 5.08 MM DISCONNECTABLE CRIMP STYLE CONNECTOR Board Connector, 2 Contact(s), 1 Row(s), Male, Straight, Solder Terminal RoHS : Compliant | 975 | |||
| PTS645VM582LFS | CK tools | 6 MM TACT SWITCH Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 1.57N, 4 PCB Hole Cnt, Solder Terminal, Through Hole-right Angle RoHS : Compliant | 805 | |||
| S05BPASK2LFSN | JST Manufacturing | THROUGH-HOLE TYPE SHROUDED SIDE ENTRY HEADER CONNECTOR Board Connector, 5 Contact(s), 1 Row(s), Male, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, White Insulator RoHS : Compliant | 500 | |||
| BH4BXH2LFSN | JST Manufacturing | 2.5 MM PITCH SHROUDED HEADER CONNECTOR Board Connector, 4 Contact(s), 1 Row(s), Male, Straight, Solder Terminal RoHS : Compliant | 414 | |||
![]() Interstate Connecting Components | S03B-PASK-2(LF)(SN) | JST Manufacturing | RoHS : Compliant |
| 258 | |
| S04B-PASK-2(LF)(SN) | JST Manufacturing | RoHS : Compliant |
| 159 | ||
| BH10B-XH-2(LF)(SN) | JST Manufacturing | RoHS : Compliant |
| 88 | ||
![]() PEI Genesis | SAL-12L-FSH4FE-0.2 | Amphenol Corporation |
| 0 | ||
![]() Rutronik | PTS645SM43SMTR92 LFS | C&K Switches | TACT 6x6 SMT H4,3mm 1,6N RoHS : Compliant |
| 226,000 | |
| PTS645SM70SMTR92 LFS | C&K Switches | TACT 6x6 SMT H7,0mm 1,6N RoHS : Compliant |
| 26,600 | ||
| PTS526SM15SMTR2 LFS | C&K Switches | TACT 5,3x5,2x1,5mm SMT 1,6N SMT RoHS : Compliant |
| 16,000 | ||
| PTS645SM95-2 LFS | C&K Switches | TACT 6x6 THT H9,5mm 1,6N RoHS : Compliant |
| 10 | ||
![]() Chip 1 Exchange | TCR3DM12,LF(SE | Toshiba America Electronic Components | INSTOCK | 19,520 | ||
| PTS645SM13SXTR92LFS | C&K Switches | INSTOCK | 15 | |||
| S09B-PASK-2 LF SN | JST Manufacturing | INSTOCK | 5 | |||
![]() Avnet Abacus | 2026-42-C2LF-S02 | Bourns Inc | BNS202642C2LFS02 (Alt: 2026-42-C2LF-S02) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | PTS645SH50SMTR92LFS![]() | C&K Switches | IN STOCK SHIP TODAY RoHS : Compliant |
| 850 | |
PTS645SM43SMTR92LFS![]() | C&K Switches | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
![]() EBV Elektronik | TCR2DG12,LF(S | Toshiba America Electronic Components | (Alt: TCR2DG12,LF(S) RoHS : Compliant | 0 | ||
| TCR2LN12,LF(SE | Toshiba America Electronic Components | LDO Regulator Positive 12V 200mA 4Pin SDFN (Alt: TCR2LN12,LF(SE) RoHS : Compliant | 0 | |||
![]() Maritex | S04B-PASK-2(LF)(SN) | JST Manufacturing | Male Pin Headers; S04B-PASK-2(LF)(SN); JST; 1; Tin; 4 RoHS : Compliant |
| 42,799 | |
![]() Master Electronics | PTS645SM50-2LFS | C&K Switches | A 6x6 mm thru-hole SPST tactile switch with momentary action a 5.0 mm height and a 160g actuation force. RoHS : Compliant |
| 24,000 | |
| PTS645VH31-2LFS | C&K Switches | 6 mm Tact Switches RoHS : Compliant |
| 7,988 | ||
| D6R40F2LFS | C&K Switches | Switch Key N.O. SPST 0.1A 32VDC 3VA 2.5N PC Pins Thru-Hole Box RoHS : Compliant |
| 5,134 | ||
| PTS526SK17SMTR2LFS | C&K Switches | Tactile Switches 5.20 x 5.20 Tact Switch for SMT RoHS : Compliant |
| 4,000 | ||
PTS125SJK73-2LFS![]() | C&K Switches | Tactile Switch - SPST-NO - 0.05A @ 12VDC - 250gf - Top Actuated - PC Pin - Through Hole. RoHS : Compliant |
| 1,503 | ||
PTS125SJM73-2LFS![]() | C&K Switches | Switch Tactile N.O. SPST Square Button PC Pins 0.05A 12VDC 200000Cycles 1.77N Thru-Hole Bulk RoHS : Compliant |
| 1,500 | ||
| PTS645SH95-2LFS | C&K Switches | 6 mm Tact Switches RoHS : Compliant |
| 585 | ||
| PTS847MM350SMTR2LFS | C&K Switches | Tactile Switch - SMT - Edge Mount - Side Activation - 350gf RoHS : Compliant |
| 0 | ||
PTS645SH70SMTR92LFS![]() | C&K Switches | 6 mm Tact Switches RoHS : Compliant |
| 0 | ||
| PTS645VSM19PSMTR92LFS | C&K Switches | Tactile Switches RoHS : Compliant |
| 0 | ||
KSC441GST2LFS![]() | C&K Switches | SMT Tactile Switch - 4N - 32VDC - 50mA - Silver Contacts - Gullwing - Soft Actuator - 5.2mm High - Lead Free - IP67 RoHS : Compliant |
| 0 | ||
| PTS526SM20SMTR2LFS | C&K Switches | Switch Tactile N.O. SPST Round Button Gull Wing 0.05A 12VDC 500000Cycles 1.57N SMD T/R RoHS : Compliant |
| 0 | ||
PTS641SP34SMTR2LFS![]() | C&K Switches | SMT Top Actuated Switches RoHS : Compliant |
| 0 | ||
| D6R60F2LFS | C&K Switches | Switch Key N.O. SPST 0.1A 32VDC 3VA 2.5N PC Pins Thru-Hole Box RoHS : Compliant |
| 0 | ||
| PTS526SPG15SMTR2LFS | C&K Switches | Tactile RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C2252LF/SP1 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable Using LMR-240 Coax with 90 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable using LMR-240 coax with 90 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable using LMR-240 coax with 90 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP1 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP1 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP1 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable using LMR-240 coax with 90 deg. clock, LF solder. | 4,940 | ||
| PE3C2252LF/SP | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable Using LMR-240 Coax with 270 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable using LMR-240 coax with 270 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable using LMR-240 coax with 270 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable using LMR-240 coax with 270 deg. clock, LF solder. | 4,940 | |||
| PE3C2252LF/SP1-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240 Coax with 90 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 12 inch length using LMR-240 coax with 90 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 12 inch length using LMR-240 coax with 90 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP1-12 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP1-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP1-12 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 12 inch length using LMR-240 coax with 90 deg. clock, LF solder. |
| 988 | ||
| PE3C2252LF/SP1-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax with 90 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 48 inch length using LMR-240 coax with 90 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 48 inch length using LMR-240 coax with 90 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP1-48 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP1-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP1-48 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 48 inch length using LMR-240 coax with 90 deg. clock, LF solder. |
| 988 | ||
| PE3C2252LF/SP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240 Coax with 270 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 36 inch length using LMR-240 coax with 270 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 36 inch length using LMR-240 coax with 270 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP-36 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP-36 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 36 inch length using LMR-240 coax with 270 deg. clock, LF solder. |
| 988 | ||
| PE3C2252LF/SP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax with 270 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 48 inch length using LMR-240 coax with 270 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 48 inch length using LMR-240 coax with 270 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP-48 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP-48 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 48 inch length using LMR-240 coax with 270 deg. clock, LF solder. |
| 988 | ||
| PE3C2252LF/SP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240 Coax with 270 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 24 inch length using LMR-240 coax with 270 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 24 inch length using LMR-240 coax with 270 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP-24 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP-24 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 24 inch length using LMR-240 coax with 270 deg. clock, LF solder. |
| 988 | ||
| PE3C2252LF/SP-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240 Coax with 270 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 12 inch length using LMR-240 coax with 270 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 12 inch length using LMR-240 coax with 270 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP-12 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP-12 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 12 inch length using LMR-240 coax with 270 deg. clock, LF solder. |
| 988 | ||
| PE3C2252LF/SP1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240 Coax with 90 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 36 inch length using LMR-240 coax with 90 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 36 inch length using LMR-240 coax with 90 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP1-36 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP1-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP1-36 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 36 inch length using LMR-240 coax with 90 deg. clock, LF solder. |
| 988 | ||
| PE3C2252LF/SP1-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240 Coax with 90 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 24 inch length using LMR-240 coax with 90 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 24 inch length using LMR-240 coax with 90 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP1-24 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP1-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP1-24 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 24 inch length using LMR-240 coax with 90 deg. clock, LF solder. |
| 988 | ||
| PE3C2252LF/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240 Coax with 270 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 60 inch length using LMR-240 coax with 270 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 60 inch length using LMR-240 coax with 270 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP-60 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP-60 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 60 inch length using LMR-240 coax with 270 deg. clock, LF solder. |
| 988 | ||
| PE3C2252LF/SP1-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240 Coax with 90 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 60 inch length using LMR-240 coax with 90 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 60 inch length using LMR-240 coax with 90 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP1-60 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP1-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP1-60 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 60 inch length using LMR-240 coax with 90 deg. clock, LF solder. |
| 988 | ||
| PE36152LF/SP | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMP Female to SMP Female Cable Using PE-SR405FL Coax, LF Solder., Radio frequency assembly SMP female to SMP female cable using PE-SR405FL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female to SMP female cable using PE-SR405FL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMP cable connection on the other. Our SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE36152LF/SP, can also be known as a SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE36152LF/SP is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency SMP female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMP female cable using PE-SR405FL coax, LF solder. | 0 | |||
![]() Vyrian | XCVU33P-2LFSVH2104E | AMD Xilinx | Field Programmable Gate Array RoHS : Compliant | 25 | ||
| XCVU9P-2LFSGD2104E | AMD Xilinx | Field Programmable Gate Array | 25 | |||
| XCZU27DR-2LFSVG1517E | AMD Xilinx | FPGA SOC RoHS : Compliant | 21 | |||
| XCZU25DR-2LFSVG1517E | AMD Xilinx | Micro Peripheral IC RoHS : Compliant | 18 | |||
| XCVU37P-2LFSVH2892E | AMD Xilinx | Field Programmable Gate Array RoHS : Compliant | 15 | |||
| XCVU11P-2LFSGD2104E | AMD Xilinx | Field Programmable Gate Array | 15 | |||
| XCZU25DR-2LFSVE1156E | AMD Xilinx | Micro Peripheral IC RoHS : Compliant | 14 | |||
| XCZU27DR-2LFSVE1156E | AMD Xilinx | FPGA SOC RoHS : Compliant | 14 | |||
| XCVU35P-2LFSVH2892E | AMD Xilinx | Field Programmable Gate Array RoHS : Compliant | 7 | |||
| XCVU35P-2LFSVH2104E | AMD Xilinx | Field Programmable Gate Array RoHS : Compliant | 6 | |||
| XCVU31P-2LFSVH1924E | AMD Xilinx | Field Programmable Gate Array RoHS : Compliant | 3 | |||
| XCZU29DR-2LFSVF1760E | AMD Xilinx | Micro Peripheral IC RoHS : Compliant | 3 | |||
| XCZU28DR-2LFSVG1517E | AMD Xilinx | Micro Peripheral IC RoHS : Compliant | 3 | |||
| XCZU28DR-2LFSVE1156E | AMD Xilinx | Micro Peripheral IC RoHS : Compliant | 2 | |||
| XCZU46DR-2LFSVH1760I | AMD Xilinx | FPGA SOC RoHS : Compliant | 1 | |||
![]() Win Source Electronics | S03B-PASK-2(LF)(SN) | JST Manufacturing | CONN HEADER R/A 3POS 2MM RoHS : Compliant |
| 32,000 | |
| PTS645SM43SMTR92 LFS | C&K Switches | SWITCH TACTILE SPST-NO 0.05A 12V |
| 25,433 | ||
PTS645SM43SMTR92LFS![]() | C&K Switches | SWITCH TACTILE SPST-NO 0.05A 12V RoHS : Compliant |
| 25,433 | ||
| S04B-PASK-2(LF)(SN) | JST Manufacturing | CONN HEADER R/A 4POS 2MM / Connector Header Through Hole, Right Angle 4 position 0.079" (2.00mm) RoHS : Compliant |
| 22,950 | ||
| S02B-PASK-2(LF)(SN) | JST Manufacturing | CONN HEADER PA 2POS SIDE 2MM TIN RoHS : Compliant |
| 18,789 | ||
| S10B-PASK-2(LF)(SN) | JST Manufacturing | CONN HEADER R/A 10POS 2MM / Connector Header Through Hole, Right Angle 10 position 0.079" (2.00mm) RoHS : Compliant |
| 13,068 | ||
| PTS645SK50SMTR92 LFS | C&K Switches | SWITCH TACTILE SPST-NO 0.05A 12V |
| 10,000 | ||
PTS645SK50SMTR92LFS![]() | C&K Switches | Tactile Switches 6 mm Tact Switches RoHS : Compliant |
| 10,000 | ||
| S06B-PASK-2(LF)(SN) | JST Manufacturing | CONN HEADER R/A 6POS 2MM RoHS : Compliant |
| 8,500 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |