| データシートサーチシステム |
|
3401A-R3 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() ComSIT USA | A03401A | ALPHA AND OMEGA SEMICONDUCTOR | AVAILABLE EU | 646 | ||
| 7443340100 | Wurth Electronics Midcom | AVAILABLE EU | 888 | |||
| 7443340100 | WURTH ELEKTRONIK (WURTH ELECTRONICS) | AVAILABLE EU | 135 | |||
| C25DNA3401TGL | Eaton Corporation | AVAILABLE EU | 148 | |||
| RK73H2ETTD3401F | KOA Speer Electronics Inc | AVAILABLE EU RoHS : Compliant | 150,000 | |||
| CD95000033401 | PACTECH | AVAILABLE EU | 71 | |||
| RK73H2BTTD3401F | KOA Speer Electronics Inc | AVAILABLE EU RoHS : Compliant | 926,250 | |||
![]() Rutronik | MX34012PF1 | JAE Electronics | 12P Pin Header STRAIGHT GRAY TIN RoHS : Compliant |
| 900 | |
| MX34012UF1 | JAE Electronics | 12P Pin Header 2,20mm GRAY 2R RoHS : Compliant |
| 782 | ||
| MX34016UF1 | JAE Electronics | 16P Pin Header 2,20mm 2R GRAY RoHS : Compliant |
| 760 | ||
| MX34012NF1 | JAE Electronics | 12P Pin Header RIGHTANGLE GRAY RoHS : Compliant |
| 513 | ||
| MX34012NF3 | JAE Electronics | 12P Pin Header RIGHTANGLE GRAY RoHS : Compliant |
| 54 | ||
| MMFTP3401 | Diotec Semiconductor AG | N-CH 30V 4A 65mOhm SOT-23 RoHS : Compliant |
| 10 | ||
![]() Avnet Asia | ME1016813401311 | Amphenol Corporation | Card Edge Connector, Dual Side, 1.57 mm, 168 Contacts, Straddle Mount, Straight, Solder (Alt: ME1016813401311) RoHS : Compliant |
| 15,000 | |
| 1-2834011-2 | TE Connectivity | Conn PC Board 2 POS 3.5mm 45? Angle Through Hole 6A Tray (Alt: 1-2834011-2) RoHS : Compliant |
| 1,701 | ||
| ME6016833401101 | Amphenol Corporation | (Alt: ME6016833401101) RoHS : Compliant |
| 9 | ||
| 3003634011 | Molex | (Alt: 3003634011) RoHS : Compliant | 5 | |||
| M8340108K1001GGD03 | Vishay Intertechnologies | (Alt: M8340108K1001GGD03) RoHS : Not Compliant | 0 | |||
| ME6016843401R71 | Amphenol Corporation | (Alt: ME6016843401R71) RoHS : Compliant | 0 | |||
| PA4340.102NLT | Pulse Electronics Corporation | Power Inductor (SMD), 1 uH, ? 20%, 7 A, Shielded, 11 A, 6mm x 5.4mm x 3mm (Alt: PA4340.102NLT) RoHS : Compliant | 0 | |||
| ME1008433401401 | Amphenol Corporation | CONN MINI COOLEDGE 0.6MM 84S,STRADDLE MO (Alt: ME1008433401401) RoHS : Compliant | 0 | |||
| ME1016813401411 | Amphenol Corporation | Card Edge Connector, Dual Side, 1.57 mm, 168 Contacts, Straddle Mount, Straight, Solder (Alt: ME1016813401411) RoHS : Compliant | 0 | |||
| M8340109K1001FCD03 | Vishay Intertechnologies | Resistor, Network, 1 kOhm, ? 1%, 1.08 W, 9 Resistors, Bussed, SIP, PC Pin, Through Hole, Thick Film (Alt: M8340109K1001FCD03) RoHS : Not Compliant | 0 | |||
| M8340109K3301GCD03 | Vishay Intertechnologies | (Alt: M8340109K3301GCD03) RoHS : Not Compliant | 0 | |||
| 1703401020 | Molex | Connector, Backplane, 120 Contacts, 12 Rows, 10 Columns, THT, Right Angle, Gold, 25 GBPS (Alt: 1703401020) RoHS : Compliant | 0 | |||
| 10142243-401TV02LF | Amphenol Corporation | (Alt: 10142243-401TV02LF) RoHS : Compliant | 0 | |||
| ME1016863401311 | Amphenol Corporation | MINI-EDGE CARD,V/T,BLA,0.6MM,30U,G,SMD-1 (Alt: ME1016863401311) RoHS : Compliant | 0 | |||
| ME1016863401311 | Amphenol Corporation | MINI-EDGE CARD,V/T,BLA,0.6MM,30U,G,SMD-1 (Alt: ME1016863401311) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 4330-030-33401 | Philips Semiconductors | IN STOCK SHIP TODAY | 44,147 | ||
| RM04F3401CTLF | Cal-Chip Electronics | IN STOCK SHIP TODAY |
| 20,000 | ||
| MF1/4DLT52R3401F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,500 | ||
| 597-3401-107F | Dialight | IN STOCK SHIP TODAY RoHS : Compliant |
| 770 | ||
| M8340102M33R0GA | Bourns Inc | IN STOCK SHIP TODAY |
| 226 | ||
| M8340105K1500JGD03 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 130 | ||
| M8340106K3000GCD03 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 120 | ||
| M8340109M5100JCD03 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 88 | ||
| 534-010-25.0000MHZ | MtronPTI | IN STOCK SHIP TODAY | 60 | |||
| MC34017-3P | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant | 49 | |||
| 142-4303-401 | Johnson Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 14 | ||
| M8340104M4701GC | TECHNO | IN STOCK SHIP TODAY |
| 14 | ||
| M8340108K1002BG | TT Electronics Resistors | IN STOCK SHIP TODAY |
| 2 | ||
| 393-4016-000A21 | SL Power Electronics | IN STOCK SHIP TODAY | 1 | |||
| LTS-3401LE | Lite-On Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
![]() DB Roberts | FTH-34-01![]() | Essentra Components | Cbl Tie HldrScrew MntNatural |
| 578 | |
| 3401 | Heyco | LTTP PG 21 SHORT THREAD G | 0 | |||
| 82-28-340-16 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin | 0 | |||
| M3-40-110-11 | Southco | 0 | ||||
| 1340130 | Essentra Components | 0 | ||||
| 0403401360E | Essentra Components | 0 | ||||
| LCBS-3-4-01 | Essentra Components | 0 | ||||
| 71210-03401 | Avdel | 0 | ||||
| H3-60-340-150 | Southco | The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use. | 0 | |||
| 82-12-340-16 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin | 0 | |||
| 1340136 | Essentra Components | 0 | ||||
| M3-40-120-25 | Southco | The M3 system uses multiple over-center latch mechanisms to provide the ultimate in consistent compression along the entire edge of an enclosure door. Available with multiple choices of stylish flush-handle actuators it can be installed to meet industry | 0 | |||
| 3401120731E | Essentra Components | 0 | ||||
| 301340141556 | Essentra Components | 0 | ||||
| 0403401334E | Essentra Components | 0 | ||||
![]() ECCO | 0400034012 | ITT Interconnect Solutions |
| 442 | ||
| 040-0034-012 | ITT Interconnect Solutions |
| 442 | |||
| 040-0034-014 | ITT Interconnect Solutions |
| 151 | |||
| 0400034014 | ITT Interconnect Solutions |
| 151 | |||
| 040-0034-016 | ITT Interconnect Solutions |
| 104 | |||
| 0400034016 | ITT Interconnect Solutions |
| 104 | |||
| 040-0034-018 | ITT Interconnect Solutions |
| 77 | |||
| 0400034018 | ITT Interconnect Solutions |
| 77 | |||
![]() FDH Electronics | MS3401D16-10PW-LC | Corsair Electrical Connectors Inc | Connector |
| 77 | |
| MS3401D18-3PY-LC | Corsair Electrical Connectors Inc | Connector |
| 74 | ||
| MS3401D18-6P-LC | Corsair Electrical Connectors Inc | Connector |
| 74 | ||
| MS3401D12S-3PZ-LC | Corsair Electrical Connectors Inc | Connector |
| 47 | ||
| MS3401D18-22SY-LC | Corsair Electrical Connectors Inc | Connector |
| 40 | ||
| MS3401D18-20DX | Corsair Electrical Connectors Inc | Connector |
| 25 | ||
| MS3401D18-22P-LC | Corsair Electrical Connectors Inc | Connector |
| 22 | ||
| MS3401D18-5DY-LC | Corsair Electrical Connectors Inc | Connector |
| 21 | ||
| MS3401D18-8D-LC | Corsair Electrical Connectors Inc | Connector |
| 21 | ||
| MS3401D18-15P | Corsair Electrical Connectors Inc | Connector 5015 |
| 19 | ||
| MS3401D16-9DW-LC | Corsair Electrical Connectors Inc | Connector |
| 15 | ||
| MS3401D16S-4DY-LC | Corsair Electrical Connectors Inc | Connector |
| 8 | ||
| MS3401D16S-4SX | Corsair Electrical Connectors Inc | Connector |
| 8 | ||
| MS3401D12S-3EW | Corsair Electrical Connectors Inc | Connector |
| 5 | ||
| MS3401D16-9EX | Corsair Electrical Connectors Inc | Connector |
| 5 | ||
![]() Flip Electronics | LV3401DM-TLM-E | onsemi | Stock, Ship Today |
| 81,000 | |
| LTE3401LX | NXP Semiconductors | Stock RoHS : Compliant | 40,000 | |||
| LPC11U24FHN33/401, | NXP Semiconductors | Stock, Ship Today |
| 2,380 | ||
![]() Pasternack Enterprises US | PE33401/HS2 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm BNC Male Cable Using 75 Ohm RG179 Coax with Double HeatShrink., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable using 75 Ohm RG179 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male cable using 75 Ohm RG179 coax with double heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE33401/HS2 can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33401/HS2 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable using 75 Ohm RG179 coax with double heatshrink. | 1,465 | ||
| PE3C3401-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 36 inches. TNC Male to BNC Male Cable 36 Inch Length Using RG188 Coax., Radio frequency assembly TNC male to BNC male cable 36 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to BNC male cable 36 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to BNC cable is a male to male assembly, PE3C3401-36, can also be known as a TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE3C3401-36 is built with RG188 which is a flexible type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance. RF specs on this 500 MHz maximum frequency TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3401-36 can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to BNC male cable 36 inch length using RG188 coax. |
| 483 | ||
| PE33401/HS2-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 24 Inch Length Using 75 Ohm RG179 Coax with Double HeatShrink., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 24 inch length using 75 Ohm RG179 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male cable 24 inch length using 75 Ohm RG179 coax with double heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE33401/HS2-24 can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33401/HS2-24 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 24 inch length using 75 Ohm RG179 coax with double heatshrink. |
| 297 | ||
| PE33401LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 36 Inch Length Using 75 Ohm RG179 Coax, RoHS., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG179 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG179 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33401LF-36, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33401LF-36 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG179 coax, RoHS. |
| 292 | ||
| PE3FCA340-15M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 5.6 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 8-Fiber LC UPC to ST UPC, OM3 Multimode Distribution Cable, 5.6mm Plenum, 2.0mm breakout, Aqua-15M. Pasternack’s PE3FCA340-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 8-fiber cable assembly is equipped with LC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA340-15M fiber optic cable with a 5.6 mm cable diameter and 42 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 21 | ||
| PE3C6340-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Outdoor Rated 4.3-10 Male Right Angle to 7/16 DIN Male Low PIM Cable 100 cm Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 male right angle to 7/16 DIN male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 male right angle to 7/16 DIN male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-250-4310M-RA-LP 4.3-10 cable connection on one end and TC-SPP250-716M-LP 7/16 DIN cable connection on the other. Our low PIM right angle TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable is a male to male coax assembly, PE3C6340-100CM, can also be known as a low PIM right angle TC-250-4310M-RA-LP 4.3-10 plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-RA-LP 4.3-10 plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly PE3C6340-100CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-RA-LP 4.3-10 cable assembly is manufactured with right angle TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-RA-LP 4.3-10 right angle male to TC-SPP250-716M-LP 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6340-100CM can also be used in the other direction and will be TC-SPP250-716M-LP 7/16 DIN male to right angle TC-250-4310M-RA-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-RA-LP 4.3-10 right angle plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-250-4310M-RA-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 male right angle to 7/16 DIN male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts. |
| 8 | ||
| PE3W08340-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 18 inches. BNC Male to BNC Male Cable 18 Inch Using LMR-240-UF Coax., Radio frequency assembly BNC male to BNC male cable 18 inch using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 18 inch using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W08340-18, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W08340-18 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 18 inch using LMR-240-UF coax. |
| 3 | ||
| PE3W08340-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Male Cable 12 Inch Using LMR-240-UF Coax., Radio frequency assembly BNC male to BNC male cable 12 inch using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 12 inch using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W08340-12, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W08340-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 12 inch using LMR-240-UF coax. |
| 3 | ||
| PE3W08340-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. BNC Male to BNC Male Cable 150 cm Using LMR-240-UF Coax., Radio frequency assembly BNC male to BNC male cable 150 cm using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 150 cm using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W08340-150CM, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W08340-150CM is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 150 cm using LMR-240-UF coax. |
| 3 | ||
| PE3401-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female Bulkhead to N Female Bulkhead Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly N female bulkhead to N female bulkhead cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to N female bulkhead cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with N type bulkhead cable connection on one end and type N bulkhead cable connection on the other. Our type N to N type cable assembly has female gender on end 1 and female on end 2. PE3401-12 can also be known as a N type jack to type N jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. Type N jack to N type jack cable assembly PE3401-12 is built with RG316 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3401-12 RF cable are available on our downloadable PDF datasheet. Type N jack bulkhead to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements. |
| 0 | ||
| PE340-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to SMA Female Low Loss Test Cable 100 CM Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA male to SMA female low loss test cable 100 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female low loss test cable 100 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss test SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE340-100CM, can also be known as a low loss test SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE340-100CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE340-100CM can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss test SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female low loss test cable 100 cm length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3401-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. N Female Bulkhead to N Female Bulkhead Cable 72 Inch Length Using RG316 Coax., Radio frequency assembly N female bulkhead to N female bulkhead cable 72 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to N female bulkhead cable 72 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with N type bulkhead cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assembly has female gender on end 1 and female on end 2. PE3401-72 can also be known as a type N jack to N type jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. Type N jack to N type jack cable assembly PE3401-72 is built with RG316 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3401-72 RF cable are available on our downloadable PDF datasheet. Type N jack bulkhead to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W03401 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using LMR-100 Coax. PE3W03401 is a N male to SMA male cable using LMR-100A coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03401 N male to SMA male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE33401-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 36 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33401-36, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33401-36 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG179 coax. | 0 | |||
| PE3W03401/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using LMR-100 Coax with HeatShrink., Pasternack’s PE3W03401/BK/HS type N male to SMA male RF cable assembly using LMR-100A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and an SMA cable connection on the other. Our type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W03401/BK/HS can also be known as a type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03401/BK/HS RF cable has a pvc jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W03401/BK/HS type N plug to SMA plug cable assembly is built with LMR-100A, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder (captive contact) attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W03401/BK/HS can also be used in the other direction and will be an SMA male to type N male cable assembly if the opposite connectivity is required. This type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
![]() TE Connectivity | 770340-1 | TE Connectivity | 02P .062 COMM P&S PLUG HSG Number of Positions: 2 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Standard Rectangular Connector | 2 Plug Housing Crimp | Part Number: 770340-1 | Internal Number: 770340-1 | TE Connectivity RoHS : Compliant |
| 39,890 | |
| 2834010-3 | TE Connectivity | SLIM CONTACT FOR WIRE 20-24AWG Connector System: Wire-to-Board Connector & Contact Terminates To: Printed Circuit Board Connector Height: .096 in Connector Height: 2.45 mm Termination Method to PCB: Surface Mount Wire-to-Board Printed Circuit Board .096" 2.45 mm | Poke-In Connector | Part Number: 2834010-3 | Internal Number: 2834010-3 | .096" | TE Connectivity RoHS : Compliant |
| 27,073 | ||
| 2834012-3 | TE Connectivity | SLIM CONTACT FOR WIRE 16-20AWG Connector System: Wire-to-Board Connector & Contact Terminates To: Printed Circuit Board Connector Height: .122 in Connector Height: 3.1 mm Termination Method to PCB: Surface Mount Wire-to-Board Printed Circuit Board .122" 3.1 mm | Poke-In Connector | Part Number: 2834012-3 | Internal Number: 2834012-3 | .122" | TE Connectivity RoHS : Compliant |
| 23,686 | ||
| 1-2834018-2 | TE Connectivity | 2POS 5.0MM TEPS CONN. Number of Positions: 2 Terminal Block Connector Type: Receptacle Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 2 Receptacle Wire-to-Board .197" | Part Number: 1-2834018-2 | Internal Number: 1-2834018-2 | .197" | TE Connectivity RoHS : Compliant |
| 11,791 | ||
| RTD34012F | TE Connectivity | RTD34012F Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form A SPST-NO Contact Current Rating: 16 A General Purpose Power Relay DC Monostable 1 Form A SPST-NO | Electromechanical Relay | Part Number: RTD34012F | Internal Number: 3-1419108-6 | TE Connectivity RoHS : Compliant |
| 8,038 | ||
| 1-2834017-2 | TE Connectivity | 2POS 3.81MM TEPS CONN. Number of Positions: 2 Terminal Block Connector Type: Receptacle Connector System: Wire-to-Board Number of Rows: 1 Wire Entry Angle: 90° PCB Terminal Block | 2 Receptacle Wire-to-Board 1 | Part Number: 1-2834017-2 | Internal Number: 1-2834017-2 | TE Connectivity RoHS : Compliant |
| 5,643 | ||
| 1-2834015-3 | TE Connectivity | 3POS 2.54MM TES CONN. Number of Positions: 3 Terminal Block Connector Type: Receptacle Connector System: Wire-to-Board Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm PCB Terminal Block | 3 Receptacle Wire-to-Board .1" | Part Number: 1-2834015-3 | Internal Number: 1-2834015-3 | .1" | TE Connectivity RoHS : Compliant |
| 4,438 | ||
| 2386340-1 | TE Connectivity | DIA 14MM,TERMINAL,FAM SLD/UNSLD,CB Terminal Type: Socket Interface Plating: Silver (Ag) Primary Locking Feature: Clean Body Sealable: No Mating Pin Diameter: 14 mm Socket Silver (Ag) Clean Body | Automotive Terminal | Part Number: 2386340-1 | Internal Number: 2386340-1 | 14 mm | TE Connectivity RoHS : Compliant |
| 2,260 | ||
| 1-2834015-6 | TE Connectivity | 6POS 2.54MM TES CONN. Number of Positions: 6 Terminal Block Connector Type: Receptacle Connector System: Wire-to-Board Number of Rows: 1 Wire Entry Angle: 180° PCB Terminal Block | 6 Receptacle Wire-to-Board 1 | Part Number: 1-2834015-6 | Internal Number: 1-2834015-6 | TE Connectivity RoHS : Compliant |
| 1,148 | ||
| RT334012F | TE Connectivity | RT334012F Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form A SPST-NO Contact Current Rating: 16 A General Purpose Power Relay DC Monostable 1 Form A SPST-NO | Electromechanical Relay | Part Number: RT334012F | Internal Number: 2-1393237-5 | TE Connectivity RoHS : Compliant |
| 1,035 | ||
| 1123340-1 | TE Connectivity | 025/040 ECU PLUG HSG ASSY 35P Nominal Voltage Architecture: 12 V Number of Positions: 35 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Board Mating Tab Width: .64 mm 1 mm Th/.025 Connector System & Housing | 12 V 35 Housing for Female Terminals Wire-to-Board | Part Number: 1123340-1 | Internal Number: 1123340-1 | .64 mm | TE Connectivity RoHS : Compliant |
| 621 | ||
| 5104340-1 | TE Connectivity | A/L LOW PRO HDR 10P RA HT Connector System: Wire-to-Board Number of Positions: 10 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: With Wire-to-Board 10 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5104340-1 | Internal Number: 5104340-1 | TE Connectivity RoHS : Compliant |
| 575 | ||
| 1-2308340-1 | TE Connectivity | FULL METAL HOODS SIZE 1 Connector Backshell Product Style: Shielded Connector Backshell Product Type: Backshell Primary Product Material: Zinc Body Orientation: Straight Compatible With Connector Shell Size: 1 Shielded Backshell Zinc Straight | D-Sub Backshell Size 1 | Part Number: 1-2308340-1 | Internal Number: 1-2308340-1 | TE Connectivity RoHS : Compliant |
| 227 | ||
| T4113401041-000 | TE Connectivity | M12,MALE,RA,B CODE,4P,PG7,GOLD Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Plug Number of Positions: 4 Circular Connector Shell Size: 20 Sealable: Yes Cable-to-Cable Circular Connector Plug 4 20 | M12 Field Installable Unshielded | Part Number: T4113401041-000 | Internal Number: T4113401041-000 | TE Connectivity RoHS : Compliant |
| 60 | ||
| T1340160140-000 | TE Connectivity | H16B-TGH-RO-M40 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1340160140-000 | Internal Number: T1340160140-000 | TE Connectivity RoHS : Compliant |
| 5 | ||
![]() Teledyne HiRel | 5962-9093401MFA | Teledyne HiRel | REGISTER, QUAD DUAL-PORT, TTL-COMPATIBLE RoHS : Not Compliant | 0 | ||
| 5962-9093401QEA | Teledyne HiRel | REGISTER, QUAD DUAL-PORT, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
M38510/33401BCA![]() | Teledyne HiRel | AND-OR-INVERT GATE, 4-2-2-2 INPUT RoHS : Not Compliant | 0 | |||
| 5962-8973401DA | Teledyne HiRel | HEX INVERTER, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-9093401MEA | Teledyne HiRel | REGISTER, QUAD DUAL-PORT, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
M38510/33401BBA![]() | Teledyne HiRel | AND-OR-INVERT GATE, 4-2-2-2 INPUT RoHS : Not Compliant | 0 | |||
| 5962-9093401M2A | Teledyne HiRel | REGISTER, QUAD DUAL-PORT, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
| 5962-9093401Q2A | Teledyne HiRel | REGISTER, QUAD DUAL-PORT, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
| 5962-8853401EA | Teledyne HiRel | FLIP-FLOP, JK, DUAL, POSITIVE EDGE-TRIGGERED, WITH TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
M38510/33401BDA![]() | Teledyne HiRel | AND-OR-INVERT GATE, 4-2-2-2 INPUT RoHS : Not Compliant | 0 | |||
| 5962-89734012A | Teledyne HiRel | HEX INVERTER, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
M38510/33401BAA![]() | Teledyne HiRel | AND-OR-INVERT GATE, 4-2-2-2 INPUT RoHS : Not Compliant | 0 | |||
M38510/33401B2A![]() | Teledyne HiRel | AND-OR-INVERT GATE, 4-2-2-2 INPUT RoHS : Not Compliant | 0 | |||
| 5962-88534012A | Teledyne HiRel | FLIP-FLOP, JK, DUAL, POSITIVE EDGE-TRIGGERED, WITH TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-8973401CA | Teledyne HiRel | HEX INVERTER, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | AGCR0603-TK-3401DT | VENKEL LTD | Auto Grade Resistor;0603;1/4W;�100PPM;3.4K;�0.5% RoHS : Compliant | 0 | ||
| MELFC0102-RE-3401BT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;3.4K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0102-UZ-3401FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�15PPM;3.4K;�1% RoHS : Compliant | 0 | |||
| MELFC0204-TC-3401CT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;3.4K;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-N-3401AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;3.4K;�0.05% RoHS : Compliant | 0 | |||
| UPTF2512-2W-N-3401DT | VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�10PPM;3.4K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-3401DT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;3.4K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-3401BT | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;3.4K;�0.1% RoHS : Compliant | 0 | |||
| TFCR1206-4W-K-3401DT | VENKEL LTD | Thin Film CR;1206;1/4W;�100PPM;3.4K;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-3401FT | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;3.4K;�1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-E-3401BT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�25PPM;3.4K;�0.1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-E-3401DT | VENKEL LTD | Thin Film CR;2010;1/4W;�25PPM;3.4K;�0.5% RoHS : Compliant | 0 | |||
| HPTF0603-QP-3401AT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�5PPM;3.4K;�0.05% RoHS : Compliant | 0 | |||
| HPTF1206-TC-3401AT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�50PPM;3.4K;�0.05% RoHS : Compliant | 0 | |||
| HPTF1210-UP-3401FT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�5PPM;3.4K;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | T3401005 | Amphenol Corporation | Circular Connector, 6 Contact(s), Brass, Female, Solder Terminal | 12,954 | ||
| HW-05-09-S-D-340-110 | Samtec Inc | Board Stacking Connector, 10 Contact(s), 2 Row(s), Male, Straight, Solder Terminal RoHS : Compliant | 12,218 | |||
ESR10EZPF3401![]() | ROHM Semiconductor | Fixed Resistor, Metal Glaze/thick Film, 0.4W, 3400ohm, 150V, 1% +/-Tol, 100ppm/Cel, 0805 RoHS : Compliant | 11,967 | |||
SSL3401HN/1Y![]() | NXP Semiconductors | Display Driver, PQCC32 RoHS : Compliant | 11,904 | |||
| 5B34-01 | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Not Compliant | 11,701 | |||
| LM3401EVAL | Texas Instruments | 9,759 | ||||
ADUM3401CRWZ![]() | Analog Devices Inc | CMOS, PDSO16 RoHS : Compliant | 9,120 | |||
| TW-24-05-L-D-340-110 | Samtec Inc | Board Stacking Connector, 48 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Solder Terminal, Black Insulator RoHS : Compliant | 8,600 | |||
LM3401-MR16DEMO/NOPB![]() | Texas Instruments | Development kits/Accessories RoHS : Compliant | 8,371 | |||
TMS34010-60FNR![]() | Texas Instruments | Graphics Processor, CMOS, PQCC68 | 7,335 | |||
7603401EX![]() | Texas Instruments | Binary Counter, LS Series, Synchronous, Positive Edge Triggered, 4-Bit, Up Direction, TTL, CDIP16 | 7,182 | |||
| 1-2308340-1 | TE Connectivity | Connector Accessory, Zinc Alloy RoHS : Not Compliant | 6,460 | |||
84134012X![]() | Texas Instruments | Multiplexer, ALS Series, 2-Func, 4 Line Input, 1 Line Output, True Output, TTL, CQCC20 | 4,927 | |||
| 34016 | Vanguard Electronics | Wire And Cable, 200 Conductor(s), 19AWG, 225V, Communication Cable | 570 | |||
| 1734016 | Phoenix Contact | Barrier Strip Terminal Block RoHS : Compliant | 387 | |||
![]() Waytek, Inc. | 0343401001 | The Bosch Group | Glow-plug Starter Switch, 100A at 24V |
| 10 | |
![]() Win Source Electronics | AO3401A | Alpha & Omega Semiconductor | MOSFET P-CH 30V 4A SOT23 RoHS : Compliant |
| 300,000 | |
| B340-13-F | Diodes Incorporated | DIODE SCHOTTKY 40V 3A SMC RoHS : Compliant |
| 114,000 | ||
| DAC53401DSGRQ1 | Texas Instruments | AUTOMOTIVE, 10-BIT, 1-CHANNEL, S / 10 Bit Digital to Analog Converter 1 8-WSON (2x2) RoHS : Compliant |
| 56,740 | ||
| MX34012SF1 | JAE Electronics | CONN SOCKET 12POS HOUSING 2.2MM / 12 Rectangular Connectors - Housings Receptacle Gray 0.087" (2.20mm) |
| 55,209 | ||
TLV3401IDBVT![]() | Texas Instruments | IC COMPARATOR SGL OD OUT SOT23-5 RoHS : Compliant |
| 35,860 | ||
TLV3401IDBVR![]() | Texas Instruments | IC OUT COMPARATR NANOPWR SOT23-5 RoHS : Compliant |
| 34,840 | ||
TLV3401IDBVRG4![]() | Texas Instruments | IC COMPARATOR SGL OD OUT SOT23-5 RoHS : Compliant |
| 34,390 | ||
| SI3401AHE3-TP | Micro Commercial Components | P-CHANNEL MOSFET,SOT-23 / P-Channel 30 V 4.4A 1.2W Surface Mount SOT-23 RoHS : Compliant |
| 20,032 | ||
| SP3401-02UTG | Littelfuse Inc | RoHS : Compliant |
| 19,680 | ||
DAC53401DSGR![]() | Texas Instruments | RoHS : Compliant |
| 18,026 | ||
| MX34016UF1 | JAE Electronics | CONN HEADER VERT 16POS 2.2MM |
| 12,560 | ||
ADUM3401BRWZ-RL![]() | Analog Devices Inc | DGTL ISO 2.5KV GEN PURP 16SOIC RoHS : Compliant |
| 11,000 | ||
| MX34016NF1 | JAE Electronics | CONN HEADER R/A 16POS 2.2MM |
| 10,000 | ||
DAC53401DSGT![]() | Texas Instruments | IC DAC 10BIT V-OUT 8WSON RoHS : Compliant |
| 9,250 | ||
LTC3401EMS#PBF![]() | Linear Technology | IC REG BOOST ADJ 1A SYNC 10MSOP RoHS : Compliant |
| 6,200 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |