3659SLASH09SOSF Price, 販売店, Stock

1 : $94.782
5 : $88.356
10 : $78.985
25 : $77.806
50 : $77.806
100 : $76.662
250 : $74.471
500 : $72.403
1,000 : $71.411
2,500 : $71.411
10,000 : $71.411

1365-917-0914

Aero-Electric Connector Inc

Shell

Neutron USA

1803659

Phoenix Contact

Pluggable Terminal Blocks 10 Pos 3.81mm pitch Plug 28-16 AWG Screw
RoHS : Compliant

1 : $39.99

RST 3-RKT/LED A 4-3-659/2M

Lumberg Connect GmbH

Sensor Cables / Actuator Cables

1 : $99.99

RST 3-RKWT/LED A 4-3-659/1M

Lumberg Connect GmbH

Cordset,M12,M Strt,3Pole to M12,F RtAng,LED PNP,3Pole,PVC Grey,3x22 wg,600006364

1 : $74.99

RSWT 3-RKT 4-3-659/0.6M

Lumberg Connect GmbH

Cordset, RA M12 M 3p-Str M12 F 4p, 3wire 0.6m cable, PVC Gray 4.82mm OD, 600006342

1 : $70.59

8365940000

Weidmüller Interface GmbH & Co. KG

Solid State Relays - SSRs MCZ O 24VUC
RoHS : Compliant

1 : $99.99

8365980000

Weidmüller Interface GmbH & Co. KG

Industrial Relays MCZ R 24VDC
RoHS : Compliant

1 : $79.99

A7303659-AX

Axiom Manufacturing

Axiom 32GB Quad Rank Low Voltage LRDIMM PC3L-12800L Load Reduced LRDIMM 1600MHz 1.35v

1 : $380.0

AXG93659

Axiom Manufacturing

1000BASE-SX SFP TRANSCEIVER FOR MERAKI NETWORKS

1 : $89.99

2903659

Phoenix Contact

Power Relay, DPDT, 12VDC Coil, 250VAC/DC, 12A, REL-IR2/LDP- 12DC/2X21
RoHS : Compliant

1 : $113.89

Pasternack Enterprises US

PE33659/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. HN Male Right Angle to N Male Cable Using RG393 Coax with HeatShrink. PE33659/HS is a HN male right angle to N male cable using RG393 coax. This Pasternack HN male right angle to N male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm N for connector 2. HN right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33659/HS HN male right angle to N male cable assembly is constructed with RG393 coax.

PE3659-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to Straight Cut Lead Cable 48 Inch Length Using RG58 Coax., Radio frequency assembly SMA male to straight cut lead cable 48 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to straight cut lead cable 48 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a straight cut lead cable connection on the other. Our SMA to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3659-48 can also be known as a SMA plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. The minimum bend radius for this cable is 2 inches, allowing for a single bend without damaging the cable. Our PE3659-48 RF cable has a PVC (NC) jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 65.9% and a minimum RF shielding of 45 dB. SMA plug to straight cut lead sexless cable assembly PE3659-48 is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3659-48 can also be used in the other direction and will be a straight cut lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Straight Cut Lead RF cable assembly as per your requirements.

1 : $52.89
25 : $50.25
50 : $47.6
100 : $45.49

PE36593

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm F Male Cable Using 75 Ohm RG179 Coax. PE36593 is a type N male to F type male cable using RG179 coax. This Pasternack type N male to type F male cable assembly uses a 75 Ohm N type for connector 1 and a 75 Ohm type F for connector 2. Our male type N to male type F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE36593 N type male to type F male cable assembly is constructed with RG179 coax.

PE3W23659

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. N Male to SMA Female Bulkhead Cable Using 53 Ohm RG55 Coax. PE3W23659 is a N male to SMA female bulkhead cable using RG55 coax. This Pasternack N male to SMA female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to female SMA bulkhead cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W23659 N male to SMA female bulkhead cable assembly is constructed with RG55 coax.

PE3659-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to Straight Cut Lead Cable 200 CM Length Using RG58 Coax., Radio frequency assembly SMA male to straight cut lead cable 200 cm length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to straight cut lead cable 200 cm length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a straight cut lead cable connection on the other. Our SMA to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3659-200CM can also be known as a SMA plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. The minimum bend radius for this cable is 2 inches, allowing for a single bend without damaging the cable. Our PE3659-200CM RF cable has a PVC (NC) jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 65.9% and a minimum RF shielding of 45 dB. SMA plug to straight cut lead sexless cable assembly PE3659-200CM is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3659-200CM can also be used in the other direction and will be a straight cut lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Straight Cut Lead RF cable assembly as per your requirements.

1 : $56.79
25 : $53.95
50 : $51.11
100 : $48.84

PE3659-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to Straight Cut Lead Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly SMA male to straight cut lead cable 12 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to straight cut lead cable 12 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a straight cut lead cable connection on the other. Our SMA to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3659-12 can also be known as a SMA plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. The minimum bend radius for this cable is 2 inches, allowing for a single bend without damaging the cable. Our PE3659-12 RF cable has a PVC (NC) jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 65.9% and a minimum RF shielding of 45 dB. SMA plug to straight cut lead sexless cable assembly PE3659-12 is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3659-12 can also be used in the other direction and will be a straight cut lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Straight Cut Lead RF cable assembly as per your requirements.

1 : $48.79
25 : $46.35
50 : $43.91
100 : $41.96

PE36594

Pasternack Enterprises

PE36598LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to UHF Female Cable Using RG58 Coax with HeatShrink, LF Solder, RoHS. PE36598LF/HS is a N male to UHF female cable using RG58 coax. This Pasternack N male to UHF female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm UHF for connector 2. Our male N to female UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE36598LF/HS N male to UHF female cable assembly is constructed with RG58 coax.

PE36593LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm F Male Cable Using 75 Ohm RG179 Coax, LF Solder. PE36593LF is a N male to F male cable using RG179 coax. This Pasternack N male to F male cable assembly uses a 75 Ohm N for connector 1 and a 75 Ohm F for connector 2. Our male N to male F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE36593LF N male to F male cable assembly is constructed with RG179 coax.

PE36598LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to UHF Female Cable Using RG58 Coax, LF Solder. PE36598LF is a N male to UHF female cable using RG58 coax. This Pasternack N male to UHF female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm UHF for connector 2. Our male N to female UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE36598LF N male to UHF female cable assembly is constructed with RG58 coax.

PE3659

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SMA Male to Straight Cut Lead Cable Using RG58 Coax., Radio frequency assembly SMA male to straight cut lead cable using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to straight cut lead cable using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a straight cut lead cable connection on the other. Our SMA to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3659 can also be known as a SMA plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. The minimum bend radius for this cable is 2 inches, allowing for a single bend without damaging the cable. Our PE3659 RF cable has a PVC (NC) jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 65.9% and a minimum RF shielding of 45 dB. SMA plug to straight cut lead sexless cable assembly PE3659 is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3659 can also be used in the other direction and will be a straight cut lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Straight Cut Lead RF cable assembly as per your requirements.

PE3659-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to Straight Cut Lead Cable 36 Inch Length Using RG58 Coax., Radio frequency assembly SMA male to straight cut lead cable 36 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to straight cut lead cable 36 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a straight cut lead cable connection on the other. Our SMA to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3659-36 can also be known as a SMA plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. The minimum bend radius for this cable is 2 inches, allowing for a single bend without damaging the cable. Our PE3659-36 RF cable has a PVC (NC) jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 65.9% and a minimum RF shielding of 45 dB. SMA plug to straight cut lead sexless cable assembly PE3659-36 is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3659-36 can also be used in the other direction and will be a straight cut lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Straight Cut Lead RF cable assembly as per your requirements.

1 : $51.59
25 : $49.01
50 : $46.43
100 : $44.37

PE3C3659

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50. N Female to N Female Bulkhead Cable Using RG402 Coax. PE3C3659 is a type N female to type N female bulkhead cable using RG402 coax. This Pasternack N type female to N type female bulkhead cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm N type for connector 2. Our female type N to female type N bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C3659 type N female to type N female bulkhead cable assembly is constructed with RG402 coax.

PE3W03659

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. N Male to SMA Male Right Angle Cable Using RG188 Coax. PE3W03659 is a N male to SMA male right angle cable using RG188 coax. This Pasternack N male to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03659 N male to SMA male right angle cable assembly is constructed with RG188 coax.

PE3W13659/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm. NEX10 Male to N Male Right Angle Cable Using 1/4 inch Superflexible Coax with HeatShrink. PE3W13659/HS is a NEX10 male to N male right angle cable using 1/4" Superflexible coax. This Pasternack NEX10 male to N male right angle cable assembly uses a 50 Ohm NEX10 for connector 1 and a 50 Ohm N for connector 2. NEX10 to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male NEX10 to male N right angle cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W13659/HS NEX10 male to N male right angle cable assembly is constructed with 1/4" Superflexible coax.

TE Connectivity

2365990-1

TE Connectivity

Grace Inertia 5.8mm 3P Tab Contact Contact Mating Area Plating Material: Tin (Sn) Contact Type: Blade Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 14 – 16 AWG Operating Voltage: 600 VAC Tin (Sn) Blade Pre-Tin 14 – 16 AWG | Connector Contact | Part Number: 2365990-1 | Internal Number: 2365990-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.09
1,000 : $0.11
500 : $0.11
250 : $0.12
100 : $0.14
50 : $0.15
25 : $0.17
10 : $0.19
1 : $0.26

7,890

3-1393659-9

TE Connectivity

V42254B1202R480=PC612 MESSERLE Connector & Housing Type: Plug Connector System: Board-to-Board Termination Post & Tail Length: .177 in Termination Post & Tail Length: 4.5 mm Number of Positions: 48 Plug Board-to-Board .177" 4.5 mm | Eurocard Connector | Part Number: 3-1393659-9 | Internal Number: 3-1393659-9 | Alias Number: V42254B1202R480 | TE Connectivity
RoHS : Compliant

1,000 : $3.88
500 : $3.99
250 : $4.12
100 : $4.25
50 : $4.38
1 : $4.8

215

3659SLASH09SOSF 販売店

リンク URL