375TAD-R Price, 販売店, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to N Male Cable Using PE-SR402AL Coax., Radio frequency assembly SMA male right angle to N male cable using PE-SR402AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to N male cable using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and type N cable connection on the other. Our right angle SMA to N type cable assemblies have a male gender on end 1 and male on end 2. PE37598 can also be known as a right angle SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE37598 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMA right angle male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37598 can also be used in the other direction and will be type N male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N male cable using PE-SR402AL coax.

746

PE3C3754-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to UHF Male Low Loss Cable 24 Inch Length Using LMR-195 Coax., Radio frequency assembly N male to UHF male low loss cable 24 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to UHF male low loss cable 24 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and UHF cable connection on the other. Our low loss type N to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3C3754-24 can also be known as a low loss N type plug to UHF plug cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF plug cable assembly PE3C3754-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency type N male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3754-24 can also be used in the other direction and will be UHF male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to UHF male low loss cable 24 inch length using LMR-195 coax.

1 : $62.09
25 : $58.99
50 : $55.88
100 : $53.4

488

PE3C6637-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P103, RF Cable Type: PE-P103, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. 2.92mm Male to 2.4mm Male Cable 50 CM Length Using PE-P103 Coax., Radio frequency assembly 2.92mm male to 2.4mm male cable 50 cm length using PE-P103 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm male to 2.4mm male cable 50 cm length using PE-P103 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 2.4mm cable connection on the other. Our 2.92mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 2.4mm cable is a male to male coax assembly, PE3C6637-50CM, can also be known as a 2.92mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.4mm plug cable assembly PE3C6637-50CM is built with PE-P103 which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 2.4mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 45 GHz maximum frequency 2.92mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6637-50CM can also be used in the other direction and will be 2.4mm male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.4mm male cable 50 cm length using PE-P103 coax.

1 : $353.99
25 : $336.29
50 : $318.59
100 : $304.43

PE33759LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMA Male Right Angle Cable Using RG400 Coax with HeatShrink, LF Solder. PE33759LF/HS is a TNC female bulkhead to SMA male right angle cable using RG400 coax. This Pasternack TNC female bulkhead to SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female TNC bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33759LF/HS TNC female bulkhead to SMA male right angle cable assembly is constructed with RG400 coax.

PE37500LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG6A/U, RF Cable Type: RG6, RF Cable Impedance: 75 Ohm. 75 Ohm F Male to 75 Ohm BNC Male Cable Using 75 Ohm RG6 Coax with HeatShrink, LF Solder, RoHS. PE37500LF/HS is a F male to BNC male cable using RG6 coax. This Pasternack F male to BNC male cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm BNC for connector 2. Our male F to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE37500LF/HS F male to BNC male cable assembly is constructed with RG6 coax.

PE3755-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMB Plug Cable 60 Inch Length Using RG188 Coax., Radio frequency assembly SMA male to SMB plug cable 60 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMB plug cable 60 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMB cable is a male to plug coax assembly, PE3755-60, can also be known as a SMA plug to SMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB male cable assembly PE3755-60 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3755-60 can also be used in the other direction and will be SMB plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB plug cable 60 inch length using RG188 coax.

1 : $57.79
25 : $54.9
50 : $52.01
100 : $49.7

PE3759/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 24 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 24 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA female bulkhead cable 24 inch length using RG142 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3759/HS-24 can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3759/HS-24 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our right angle SMA male to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMA plug to SMA jack cable assembly PE3759/HS-24 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3759/HS-24 can also be used in the other direction and will be a SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

PE37594-60

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm, Length: 60 inches. TNC Male to BNC Male Cable 60 Inch Length Using PE-C240 Coax., Radio frequency assembly TNC male to BNC male cable 60 inch length using PE-C240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. TNC male to BNC male cable 60 inch length using PE-C240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our low loss TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to BNC cable is a male to male coax assembly, PE37594-60, can also be known as a low loss TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE37594-60 is built with PE-C240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37594-60 can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to BNC male cable 60 inch length using PE-C240 coax.

1 : $64.19
25 : $60.98
50 : $57.77
100 : $55.2

PE33752-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to BNC Male Right Angle Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly SMA male right angle to BNC male right angle cable 12 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to BNC male right angle cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle BNC cable connection on the other. Our right angle SMA to right angle BNC cable assembly has male gender on end 1 and male on end 2. PE33752-12 can also be known as a right angle SMA plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE (LD) dielectric type. SMA plug to BNC plug cable assembly PE33752-12 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33752-12 RF cable are available on our downloadable PDF datasheet.PE33752-12 can also be used in the other direction and will be right angle BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $149.99
25 : $142.49
50 : $134.99
100 : $128.99

PE37554-108

Pasternack Enterprises

Key Specifications, Connector 1 Series: MHV, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 108 inches. MHV Male Right Angle to MHV Male Right Angle Cable 108 Inch Length Using RG214 Coax., Radio frequency assembly MHV male right angle to MHV male right angle cable 108 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHV male right angle to MHV male right angle cable 108 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to MHV cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle MHV cable connection on one end and right angle MHV cable connection on the other. Our right angle MHV to right angle MHV cable assembly has male gender on end 1 and male on end 2. PE37554-108 can also be known as a right angle MHV plug to right angle MHV plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE (LD) dielectric type. MHV plug to MHV plug cable assembly PE37554-108 is built with RG214 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with right angle MHV to right angle MHV cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37554-108 RF cable are available on our downloadable PDF datasheet. MHV right angle plug to MHV right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MHV RF cable assembly as per your requirements.

1 : $376.99
25 : $358.14
50 : $339.29
100 : $324.21

PE3756-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male Right Angle to BNC Male Cable 6 Inch Length Using RG188 Coax., Radio frequency assembly SMA male right angle to BNC male cable 6 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to BNC male cable 6 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and BNC cable connection on the other. Our right angle SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3756-6, can also be known as a right angle SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3756-6 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3756-6 can also be used in the other direction and will be BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to BNC male cable 6 inch length using RG188 coax.

1 : $70.69
25 : $67.16
50 : $63.62
100 : $60.79

PE37576/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to MMCX Plug Right Angle Cable Using RG174 Coax with HeatShrink. PE37576/HS is a reverse polarity SMA male right angle to MMCX plug right angle cable using RG174 coax. This Pasternack reverse polarity SMA male right angle to MMCX plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. SMA right angle to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to plug MMCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37576/HS SMA reverse polarity male right angle to MMCX plug right angle cable assembly is constructed with RG174 coax.

PE37581LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using RG141 Coax with HeatShrink, LF Solder. PE37581LF/HS is a BNC male to SMA male cable using RG141 coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37581LF/HS BNC male to SMA male cable assembly is constructed with RG141 coax.

PE3759LF-72

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 72 Inch Length Using RG142 Coax, RoHS., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 72 inch length using RG142 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 72 inch length using RG142 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3759LF-72, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3759LF-72 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3759LF-72 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 72 inch length using RG142 coax, RoHS.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

PE3W03757LF

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using LMR-195-FR Coax, LF Solder. PE3W03757LF is a BNC male to SMA male cable using LMR-195-FR coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03757LF BNC male to SMA male cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems.

Teledyne HiRel

CY37512P208-100UM

Teledyne HiRel

PROGRAMMABLE LOGIC DEVICE, 128 MACROCELL, ELECTRICALLY ALTERABLE, 100 MHZ

CY37512P208-83UMB

Teledyne HiRel

PROGRAMMABLE LOGIC DEVICE, 512 MACROCELL, ELECTRICALLY ALTERABLE, 83 MHZ

Vyrian

1375795-2

TE Connectivity

Board Connector, 104 Contact(s), 4 Row(s), Female, Straight, 0.1 inch Pitch, Press Fit Terminal, Black Insulator, Receptacle
RoHS : Compliant

6,100

1873375

Phoenix Contact

Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

5,750

1828375

Phoenix Contact

Modular Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

3,450

1792375

Phoenix Contact

Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

2,600

MAX7375AUR375-T

Analog Devices Inc

Analog Circuit, 1 Func, BICMOS, PDSO3
RoHS : Not Compliant

2,550

MAX6375XR46-T

Analog Devices Inc

Analog Circuit

1,750

MAX6375UR28+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +2.8V, PDSO3
RoHS : Compliant

1,500

M74HC375TTR

STMicroelectronics

1,250

MT48H8M16LFB3-75

Micron Technology Inc

930

MAX7375AXR805+

Maxim Integrated Products

CMOS Output Clock Oscillator, 0.6MHz Min, 9.99MHz Max
RoHS : Compliant

800

OM3750HNN3

NXP Semiconductors

490

MAX3753CCM

Analog Devices Inc

Telecom Circuit, 1-Func, PQFP48
RoHS : Not Compliant

320

1-1375870-0

TE Connectivity

Board Connector, 24 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Locking, Natural Insulator, Receptacle
RoHS : Not Compliant

220

MC9S12P32CFT-679375R

NXP Semiconductors

200

375

3m Electronic Products Division

Tapes

140

Waytek, Inc.

22CC37D0375B

Essentra Components

3/8" Nylon Cable Clamp Black Size 10 Stud 3/8" Wide

100 : $0.0864
200 : $0.0833
500 : $0.077
1,000 : $0.0713
5,000 : $0.0677

51,189

5700375BK00R3

ShawCor Ltd

DSG-Canusa CPA-100 dual-wall heat shrink tubing is black adhesive-lined polyolefin tubing with a 3/8" size for sealing and protecting wires, splices, and terminals. Its dual-wall construction supports moisture resistance, abrasion protection, and durable environmental sealing in spool applications.

200 : $1.056
1,000 : $0.9669

15,200

22CC50D0375B

Essentra Components

3/8" Nylon Cable Clamp Black Size 10 Stud 1/2" Wide

100 : $0.2349
200 : $0.2153
500 : $0.194
1,000 : $0.1763
5,000 : $0.1678

14,499

CPX 100 0375 BK 100'

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a .375" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

100 : $0.4254
500 : $0.3895

12,700

22CC37D0375

Essentra Components

3/8" Nylon Cable Clamp Natural Size 10 Stud 3/8" Wide
RoHS : Compliant

100 : $0.0859
200 : $0.0814
500 : $0.0757
1,000 : $0.0712
5,000 : $0.0622

7,183

22AWC00375

Essentra Components

Natural Adhesive Backed Clamp Bundle W .46" X H .310" UL APPROVED NYLON 94V-2

20 : $0.2133
200 : $0.2022
500 : $0.1882
1,000 : $0.1801

6,536

5700375RD00R3

ShawCor Ltd

DSG-Canusa CPA-100 dual-wall heat shrink tubing is red adhesive-lined polyolefin tubing with a .375" size for sealing and protecting wires, splices, and terminals. Its dual-wall construction supports moisture resistance, abrasion protection, and durable environmental sealing in spool applications.

200 : $1.0519
1,000 : $0.9631

3,400

22CC50D0375

Essentra Components

3/8" Nylon Cable Clamp Natural Size 10 Stud 1/2" Wide

100 : $0.1552
200 : $0.1491
500 : $0.1442
1,000 : $0.1368
5,000 : $0.132

3,328

CPX 100 0375 BK 200'

ShawCor Ltd

200 : $0.3904
1,000 : $0.3574

2,600

5550375RD00R3

ShawCor Ltd

DSG-Canusa 5550375RD00R3 CPA-300 heat shrink tubing is red adhesive-lined tubing with a .375" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

200 : $1.5182
1,000 : $1.39

800

22375-000

Eaton Electronics

7.5 AMP Circuit Breaker Type 3 ATC Blade Bussmann 22375-000

1 : $7.63
10 : $6.93
50 : $6.35
100 : $5.52
200 : $5.2
500 : $4.97

616

4200375RD0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is red tubing with a 3/8" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

5 : $2.6774
10 : $2.3131
50 : $2.0913
100 : $1.9248
500 : $1.806

462

4200375BK0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a 3/8" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

5 : $2.6774
10 : $2.3131
50 : $2.0913
100 : $1.9248
500 : $1.806

459

5550375BK00R3

ShawCor Ltd

DSG-Canusa 5550375BK00R3 CPA-300 heat shrink tubing is black adhesive-lined tubing with a .375" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

200 : $1.5789
1,000 : $1.4456

1-1563759-1

TE Connectivity

The TE Connectivity 1-1563759-1 HDSCS Series sealed female receptacle housing provides 18 circuits for commercial vehicle and off-road electrical systems. Rated IP67, 60VDC, and 40A, it accepts AMP MCP 1.5K female terminals and uses TE's stamped-and-formed contact system. An attached receptacle seal supports protected, dependable connections in demanding environments.
RoHS : Compliant

1 : $3.09
10 : $2.97
50 : $2.88
100 : $2.72
200 : $2.62
500 : $2.55

Win Source Electronics

AH375-WG-7

Diodes Incorporated

MAGNETIC SWITCH LATCH SC59-3
RoHS : Compliant

760 : $0.397
565 : $0.4428
440 : $0.4581
320 : $0.4733
205 : $0.4886
85 : $0.5955

36,000

TPS23750PWPR

Texas Instruments

IC INTEG IEEE PD CTRLR 20-HTSSOP
RoHS : Compliant

135 : $2.2287
101 : $2.4858
78 : $2.5715
57 : $2.6572
37 : $2.743
15 : $3.343

33,490

TPS23755

Texas Instruments

IEEE 802.3at PoE PD Controller with Integrated Flyback PWM Controller

380 : $0.7939
285 : $0.8855
220 : $0.9161
160 : $0.9466
105 : $0.9771
45 : $1.1909

33,000

OPA375IDCKT

Texas Instruments

IC OPAMP GP 1 CIRCUIT SC70-5
RoHS : Compliant

410 : $0.7407
305 : $0.8262
235 : $0.8547
170 : $0.8832
110 : $0.9117
50 : $1.1111

16,900

TPS23756PWP

Texas Instruments

IC POE INTERFACE SWITCH 20HTSSOP
RoHS : Compliant

171 : $1.7586
128 : $1.9615
99 : $2.0291
72 : $2.0968
47 : $2.1644
19 : $2.6379

16,000

LT3758AHMSE#PBF

Analog Devices Inc

IC REG CTRLR MULT TOP 10MSOP
RoHS : Compliant

36 : $8.3864
29 : $8.7273
23 : $9.0682
16 : $9.75
10 : $10.091
5 : $10.7728

15,060

CSD95375Q4M

Texas Instruments

Synchronous Buck NexFET™ Power Stage
RoHS : Compliant

119 : $2.8364
95 : $2.9518
74 : $3.067
51 : $3.2976
33 : $3.413
16 : $3.6435

12,500

TPS23753PWR

Texas Instruments

IC IEEE 802.3-2005 POE 14TSSOP
RoHS : Compliant

145 : $2.0699
109 : $2.3087
84 : $2.3883
61 : $2.468
40 : $2.5476
17 : $3.1048

2,500

LT3750EMS#TRPBF

Analog Devices Inc

IC Flyback Forw Converter 10MSOP
RoHS : Compliant

34 : $8.8637
26 : $9.8864
20 : $10.2273
15 : $10.5682
10 : $10.9091
4 : $13.2955

2,260

TMS320F28375DPTPT

Texas Instruments

IC MCU 32BIT 1MB FLASH 176HLQFP / MCU 32-bit C28x RISC 1MB Flash 1.2V/3.3V 176-Pin HLQFP EP
RoHS : Compliant

20 : $15.2728
15 : $17.035
12 : $17.6224
9 : $18.2098
6 : $18.7972
3 : $22.9091

2,000

0154.375DRT

Littelfuse Inc

FUSE BRD MT 375MA 125VAC/VDC SMD
RoHS : Compliant

72 : $4.2211
54 : $4.7082
42 : $4.8705
30 : $5.0329
20 : $5.1952
8 : $6.3316

2,000

LT3758EDD#PBF

Linear Technology

IC REG CTRLR MULT TOPOLOGY 10DFN / DC/DC Cntrlr Single-OUT Flyback/Step Up 330kHz Automotive 10-Pin DFN EP Tube
RoHS : Compliant

44 : $7.6633
33 : $8.5474
26 : $8.8422
19 : $9.1368
12 : $9.4316
5 : $11.4948

1,910

LT3758EDD#TRPBF

Analog Devices Inc

IC REG CTRLR MULT TOPOLOGY 10DFN
RoHS : Compliant

54 : $5.6139
40 : $6.2616
31 : $6.4776
23 : $6.6935
15 : $6.9094
6 : $8.4208

1,810

LT3756EMSE-2#PBF

Linear Technology

IC LED DRIVER CTRLR DIM 16MSOP
RoHS : Compliant

26 : $11.7346
20 : $13.0886
15 : $13.5399
11 : $13.9913
7 : $14.4426
3 : $17.6019

628

LT3758IMSE#PBF

Linear Technology

IC REG CTRLR MULT TOP 10MSOP
RoHS : Compliant

60 : $5.0048
45 : $5.5822
35 : $5.7747
26 : $5.9672
17 : $6.1597
7 : $7.5071

452

375TAD-R 販売店

リンク URL