| データシートサーチシステム |
|
409G-AE2-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() ComSIT USA | 5084098 | QUAIL ELECTRONICS | AVAILABLE EU | 29 | ||
| LM3409HVMYNOPB | AVAILABLE EU | 2,125 | ||||
| 3044092 | Phoenix Contact | AVAILABLE EU RoHS : Compliant | 487 | |||
| 10044092001 | Supercon Inc | AVAILABLE EU | 44 | |||
| 835409A | CHUNXING | AVAILABLE EU | 2,742 | |||
| JZ505417409 | STORA ENSO | AVAILABLE EU | 4,500 | |||
| DPB09PN7409SN74S2 | Deltron / DEM Manufacturing | AVAILABLE EU | 131 | |||
| PAK0040902B | GRANPACK | AVAILABLE EU | 173 | |||
![]() ComSIT USA | HEF4093BT![]() | NXP Semiconductors | QUAD 2-INPUT NAND SCHMITT TRIGGER NAND Gate, 4000/14000/40000 Series, 4-Func, 2-Input, CMOS, PDSO14 RoHS : Compliant | 5,675 | ||
| L1304090002011001 | Lumileds | highest drive current 3V mid power LED Visible LED RoHS : Compliant | 5,000 | |||
| B45196P6106K409 | TDK Electronics | PERFORMANCE, HIGH RELIABILITY TANTALUM CHIP CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6.3V, 10% +Tol, 10% -Tol, 10uF, Surface Mount, 2917 RoHS : Not Compliant | 4,785 | |||
74LV4094DB![]() | NXP Semiconductors | 8-STAGE SHIFT-AND-STORE BUS REGISTER Serial In Parallel Out RoHS : Compliant | 2,000 | |||
| VB409 | SGS Semiconductor Ltd | DOUBLE OUTPUT HIGH VOLTAGE REGULATOR POWER I.C. Fixed Positive Standard Regulator, 2 Output, 5V1, 16V2, BIPolar, PZFM5 RoHS : Not Compliant | 1,990 | |||
| AS7C409615TC | Alliance Memory Inc | 5V 512K X 8 CMOS SRAM Standard SRAM, 512KX8, 15ns, CMOS, PDSO44 RoHS : Not Compliant | 264 | |||
| 5134091400 | VOIGT electronic GmbH | ETHERNET MODULE TRANSFORMER Datacom Transformer, 10/100 BASE-T; ETHERNET Application(s), 1CT:1CT; 1CT:1CT RoHS : Not Compliant | 220 | |||
| MGVC5409PGE | Conexant Systems Inc | Electronic Component RoHS : Not Compliant | 198 | |||
HCF4098BM1![]() | STMicroelectronics | DUAL MONOSTABLE MULTIVIBRATOR Monostable Multivibrator, 4000/14000/40000 Series, 2-Func, CMOS, PDSO16 RoHS : Not Compliant | 190 | |||
| AM27C4096100DC | AMD | 4 MEGABIT (256 K X 16-BIT) CMOS EPROM UVPROM, 256KX16, 100ns, CMOS, CDIP40 RoHS : Not Compliant | 135 | |||
| HN27C4096ACP12 | Hitachi Ltd | 262144-WORD X 16-BIT CMOS ONE TIME PROGRAMMABLE ROM OTP ROM, 256KX16, 120ns, CMOS, PQCC44 RoHS : Not Compliant | 106 | |||
| AT49F04090JI | Atmel Corporation | 4-MEGABIT (512K X 8) 5-VOLT ONLY FLASH MEMORY Flash, 512KX8, 90ns, PQCC32 RoHS : Not Compliant | 100 | |||
TMS320VC5409PGE100![]() | Texas Instruments | FIXED-POINT DIGITAL SIGNAL PROCESSOR Digital Signal Processor, 16-Bit Size, 16-Ext Bit, 20MHz, CMOS, PQFP144 RoHS : Compliant | 40 | |||
CD4093BPW![]() | Texas Instruments | CMOS QUAD 2-INPUT NAND SCHMITT TRIGGER NAND Gate, 4000/14000/40000 Series, 4-Func, 2-Input, CMOS, PDSO14 RoHS : Compliant | 35 | |||
| V62C21164096LL70B | Mosel Vitelic Corporation | 256K X 16 CMOS STATIC RAM Standard SRAM, 256KX16, 70ns, CMOS, PBGA48 RoHS : Not Compliant | 10 | |||
![]() Interstate Connecting Components | 1-1624094-7 | TE Connectivity | 3613C 470UH 10% RoHS : Compliant |
| 0 | |
| 1-409284-6 | TE Connectivity | SHEAR,FLOAT FRONT | 0 | |||
| 1618240-9 | TE Connectivity | K43B234=RELAY, VACUUM, SPST-NC RoHS : Compliant |
| 0 | ||
| 122409RP | Amphenol RF | TNC STRAIGHT CRIMP JACK F |
| 0 | ||
| 10-645409-8G | Amphenol Aerospace | SA-AAO | 0 | |||
| 10140903-1824B2LF | Amphenol FCi | EHPCE VR PF 18MP24S NO-1014090 | 0 | |||
| 111434-4098 | ITT Interconnect Solutions | KJAM0T25K8SB | 0 | |||
| 010524409500-M | TE Connectivity | CORE.188X9.50 4-40 ANNEAL | 0 | |||
| 04-0974-0033 | TE Connectivity | PT9101-0200-124-1110 | 0 | |||
| 04-0974-0114 | TE Connectivity | PT9101-0250-121-1110 RoHS : Not Compliant | 0 | |||
| 04-0974-0439 | TE Connectivity | PT9101-0350-111-4110 | 0 | |||
| 04-0975-0069 | TE Connectivity | PT9150-10000-111-1110 RoHS : Not Compliant | 0 | |||
| 04-0975-0645 | TE Connectivity | PT9150-0400-211-3140 RoHS : Not Compliant | 0 | |||
| 04-0979-0191 | TE Connectivity | PT9420-0150-222-1120 | 0 | |||
| 04-0979-0227 | TE Connectivity | PT9420-1000-112-1130 RoHS : Not Compliant | 0 | |||
![]() PEI Genesis | GTC00AF40-9PW-B30 | Amphenol Corporation |
| 0 | ||
| GTC00AF40-9S-025 | Amphenol Corporation |
| 0 | |||
| GTC00AF40-9S-025-RDS | Amphenol Corporation |
| 0 | |||
| GTC00AF40-9SX-025 | Amphenol Corporation |
| 0 | |||
| GTC00AF40-9SX-LC | Amphenol Corporation |
| 0 | |||
| GTC06AF40-9PY-B30 | Amphenol Corporation |
| 0 | |||
| GTC06AF40-9SZ-025 | Amphenol Corporation |
| 0 | |||
| GTC06AF40-9SZ-025-B30 | Amphenol Corporation |
| 0 | |||
| GTC06F40-9SY-RDS | Amphenol Corporation |
| 0 | |||
| GTC08AF40-9S-023 | Amphenol Corporation |
| 0 | |||
| GTC08AF40-9S-023-B30 | Amphenol Corporation |
| 0 | |||
| GTC08AF40-9SZ | Amphenol Corporation |
| 0 | |||
| GTC08F40-9P-025 | Amphenol Corporation |
| 0 | |||
| GTC08F40-9PX | Amphenol Corporation |
| 0 | |||
| GTC08F40-9PX-023 | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | DW-04-09-L-D-391 | Samtec Inc | Flexible Board Stacking Header, 0.100 Pi RoHS : Compliant |
| 1,389 | |
| DW-04-09-T-D-423 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 483 | ||
| DW-04-09-L-T-250 | Samtec Inc | Flexible Board Stacking Header, 0.100 Pi RoHS : Compliant |
| 469 | ||
| 122409RP | Amphenol RF | RP-TNC Straight Cable Jack 50 Ohm |
| 274 | ||
| DW-04-09-T-S-275 | Samtec Inc | Cable Assembly, Wire-to-Board, Dual-Row RoHS : Compliant |
| 216 | ||
| DW-04-09-T-S-400 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 216 | ||
| DW-04-09-T-S-437 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 216 | ||
| DW-04-09-T-S-236-002 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 192 | ||
| TW-14-09-G-D-215-120 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 152 | ||
| TW-24-09-S-D-189-110 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 120 | ||
| ZW-14-09-L-S-409-116 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 106 | ||
| TW-44-09-G-T-171-157 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 35 | ||
| 1618240-9 | TE Connectivity | Relays RoHS : Compliant |
| 3 | ||
| 3459W409S | Amphenol Corporation | MIL-C 5015 AMPHENOL/MATRIX CONNECTOR |
| 2 | ||
| 04-0988-0632 | TE Connectivity | SENSOR 04-0988-0632 |
| 1 | ||
![]() PUI | 12.60409 | 4,010 | ||||
| 900004093 | 4 | |||||
![]() Richardson RFPD | 122409RP | Amphenol Corporation | Conn TNC 0Hz to 11GHz 50Ohm Crimp ST Cable Mount F RoHS : Compliant |
| 0 | |
| DMJ3944-099 | Skyworks Solutions Inc | RF SCHOTTKY DIODE RoHS : Compliant | 0 | |||
| 640907-1 | TE Connectivity | PIDG Quick Disconnect Terminal 10-12AWG Brass Yell RoHS : Compliant |
| 0 | ||
| SI5334A-B14099-GM | Skyworks Solutions Inc | Pin Controlled Any Frequency, Any Output Quad Cloc RoHS : Compliant | 0 | |||
| R0.25S-2409-R | RECOM Power GmbH | Module DC-DC 24VIN 1-OUT 9V 0.028A 0.25W 5-Pin SMD RoHS : Compliant |
| 0 | ||
| R1D12-2409/P | RECOM Power GmbH | Module DC-DC 24VIN 2-OUT 9V/-9V 0.056A/-0.056A 1W RoHS : Compliant |
| 0 | ||
| R2S12-2409-R | RECOM Power GmbH | Module DC-DC 24VIN 1-OUT 9V 0.222A 2W Medical 10-P RoHS : Compliant |
| 0 | ||
| 84094200 | HUBER+SUHNER | Conn MBX 0Hz to 6GHz 50Ohm Crimp ST SMD RCP SUCOPR RoHS : Compliant | 0 | |||
| ADA4097-2HRZ-RL7 | Analog Devices Inc | Op Amp Dual Precision Amplifier R-R I/O ±25V/50V 8 RoHS : Compliant |
| 0 | ||
| ADA4099-1BUJZ-R5 | Analog Devices Inc | Op Amp Single Precision Amplifier R-R I/O ±25V/50V RoHS : Compliant |
| 0 | ||
ADG5409BRUZ![]() | Analog Devices Inc | Analog Multiplexer Single 4:1 16-Pin TSSOP Tube RoHS : Compliant |
| 0 | ||
AT27C040-90JU![]() | Microchip Technology Inc | EPROM OTP 4M-bit 512K x 8 90ns 32-Pin PLCC Tube RoHS : Compliant | 0 | |||
| ADA4097-2BRMZ-RL7 | Analog Devices Inc | Op Amp Dual Precision Amplifier R-R I/O ±25V/50V 8 RoHS : Compliant |
| 0 | ||
| R1M-2409S/SMD | RECOM Power GmbH | Module DC-DC 24VIN 1-OUT 9V 0.112A 1W 6-Pin SMD Mo RoHS : Compliant |
| 0 | ||
| REC3-2409SRW/H6/A/M/CTRL | RECOM Power GmbH | Module DC-DC 24VIN 1-OUT 9V 0.33A 3W Medical 9-Pin RoHS : Compliant |
| 0 | ||
![]() Rutronik | CR40-91R0-FY | ASJ Holdings Limited | RC1210 91R 1% 0,5W TK100 RoHS : Compliant |
| 80,000 | |
| 430450409 | Molex | 04P Micro-Fit Header SMT W/NAILS RoHS : Compliant |
| 27,600 | ||
| CR40-9100-FL | ASJ Holdings Limited | RC1210 910R 1% 0,5W TK100 RoHS : Compliant |
| 10,000 | ||
| THF 409 220 2 | Fischer Elektronik GmbH & Co KG | TRANSISTOR RETAINING SPRING RoHS : Compliant |
| 6,500 | ||
| MSM04091 | Sauro srl | 04P Terminal Block 5.00mm RoHS : Compliant |
| 800 | ||
| 4301.1409 | Schurter Electronic Components | FUSE DRAWE 1P 10A EXTRA SAFE RoHS : Compliant |
| 400 | ||
AS7C34098A-12TIN![]() | Alliance Memory Inc | SRAM 256Kx16 12ns TSOP44 3.3V RoHS : Compliant |
| 270 | ||
| MKP1848E54090JI2 | Vishay Intertechnologies | FP 4,0uF 900Vdc 5% P22,5 MKP RoHS : Compliant |
| 180 | ||
| MKP1848E54090JK2 | Vishay Intertechnologies | FP 4,0uF 900Vdc 5% P27,5 MKP RoHS : Compliant |
| 160 | ||
AS7C4098A-12TIN![]() | Alliance Memory Inc | SRAM 256Kx16 12ns TSOP44 5V RoHS : Compliant |
| 135 | ||
| RS3-2409D | RECOM Power GmbH | DC/DC Mod 24V to +/-09V 3W 1kV 1kV SMD RoHS : Compliant |
| 44 | ||
| RO-2409S | RECOM Power GmbH | DC/DC Mod 24V to 09V 1W 1kV 1kV SMD RoHS : Compliant |
| 42 | ||
| Q65113A5409 | ams OSRAM Group | Mira220-2QI1WA FT SE RoHS : Compliant |
| 6 | ||
| 409-3-100L2-010-550808-BS-0055 | MPE-Garry GmbH | FFC-Cable 10P pitch=1.00mm L=055mm RoHS : Compliant |
| 3 | ||
| SP005409892 | Infineon Technologies AG | EVALBOARD EVAL-IMOTION2GO RoHS : Compliant |
| 1 | ||
![]() Chip 1 Exchange | M74HC4094RM13TR | INSTOCK | 40,000 | |||
| HEF4093BT | Philips Semiconductors | INSTOCK RoHS : Compliant | 2,273 | |||
| B45196-E2336-M409 | INSTOCK | 2,250 | ||||
| B45196H4476K409 | TDK Electronics | INSTOCK | 1,718 | |||
| CV032994-091LF | INSTOCK | 1,600 | ||||
| B45196-H3686-M409 | TDK Electronics | INSTOCK RoHS : Compliant | 1,500 | |||
| NT-2101409-03 | OMRON Corporation | INSTOCK | 1,032 | |||
| B45196E2336K409 | INSTOCK | 750 | ||||
| MG3A 4.096MHZ | INSTOCK | 606 | ||||
| B45196-E2336-M409 | TDK Electronics | INSTOCK | 149 | |||
| 350.064.095-3-01 | INSTOCK | 137 | ||||
| HEF4093BTD | INSTOCK | 130 | ||||
| 840925- | INSTOCK | 69 | ||||
| HEF4093BT | Philips Semiconductors | INSTOCK RoHS : Compliant | 30 | |||
| 409506 | INSTOCK | 3 | ||||
![]() ECCO | 97-45-1622S-4(0920) | Amphenol Industrial Operations |
| 1,365 | ||
| SR-4090B | Essentra Components |
| 1,000 | |||
| 2370409000 | ITT Interconnect Solutions |
| 74 | |||
| 237-0409-000 | ITT Interconnect Solutions |
| 74 | |||
| 97-45-1418P-4(0920) | Amphenol Industrial Operations | 65 | ||||
| 97-45-1418P-4(0920) | Amphenol Industrial Operations |
| 65 | |||
| 10-826074-09P | Amphenol Aerospace |
| 5 | |||
![]() Pasternack Enterprises US | PE34098 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50. N Male to 7/16 DIN Male Cable Using RG213 Coax. PE34098 is a type N male to 7/16 DIN male cable using RG213 coax. This Pasternack N type male to 7/16 DIN male cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male N type to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34098 type N male to 7/16 DIN male cable assembly is constructed with RG213 coax. | 631 | ||
| PE3W04099-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: RP, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: RP, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Plug to Reverse Polarity SMA Plug Right Angle Low Loss Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly reverse polarity SMA plug to reverse polarity SMA plug right angle low loss cable 12 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to reverse polarity SMA plug right angle low loss cable 12 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with rp SMA cable connection on one end and right angle rp SMA cable connection on the other. Our low loss rp SMA to right angle rp SMA cable assemblies have a plug gender on end 1 and plug on end 2. PE3W04099-12 can also be known as a low loss rp SMA male to right angle rp SMA male cable assembly and will be shipped same-day as it is purchased. Rp SMA male to rp SMA male cable assembly PE3W04099-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible rp SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this rp SMA plug to rp SMA right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04099-12 can also be used in the other direction and will be right angle rp SMA plug to rp SMA plug cable assembly if the opposite connectivity is required. Low loss SMA rp male to SMA rp right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to reverse polarity SMA plug right angle low loss cable 12 inch length using LMR-195 coax. |
| 489 | ||
| PE3W04099-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: RP, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: RP, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Reverse Polarity SMA Plug to Reverse Polarity SMA Plug Right Angle Low Loss Cable 48 Inch Length Using LMR-195 Coax., Radio frequency assembly reverse polarity SMA plug to reverse polarity SMA plug right angle low loss cable 48 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to reverse polarity SMA plug right angle low loss cable 48 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with rp SMA cable connection on one end and right angle rp SMA cable connection on the other. Our low loss rp SMA to right angle rp SMA cable assemblies have a plug gender on end 1 and plug on end 2. PE3W04099-48 can also be known as a low loss rp SMA male to right angle rp SMA male cable assembly and will be shipped same-day as it is purchased. Rp SMA male to rp SMA male cable assembly PE3W04099-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible rp SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this rp SMA plug to rp SMA right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04099-48 can also be used in the other direction and will be right angle rp SMA plug to rp SMA plug cable assembly if the opposite connectivity is required. Low loss SMA rp male to SMA rp right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to reverse polarity SMA plug right angle low loss cable 48 inch length using LMR-195 coax. |
| 489 | ||
| PE3FCA409 | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to SC UPC, OM3 Multimode Distribution Cable, 6.2mm Plenum, 2.0mm breakout, Aqua. Pasternack’s PE3FCA409 fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 12-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA409 fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. | 280 | |||
| PE34098-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to 7/16 DIN Male Cable 36 Inch Length Using RG213 Coax., Radio frequency assembly N male to 7/16 DIN male cable 36 inch length using RG213 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male cable 36 inch length using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our N type to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE34098-36, can also be known as a type N plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. N type plug to 7/16 DIN plug cable assembly PE34098-36 is built with RG213 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34098-36 can also be used in the other direction and will be 7/16 DIN male to N type male cable assembly if the opposite connectivity is required. Type N plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male cable 36 inch length using RG213 coax. |
| 86 | ||
| PE3FCA409-25M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to SC UPC, OM3 Multimode Distribution Cable, 6.2mm Plenum, 2.0mm breakout, Aqua-25M. Pasternack’s PE3FCA409-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 12-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA409-25M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 56 | ||
| PE3FCA409-15M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to SC UPC, OM3 Multimode Distribution Cable, 6.2mm Plenum, 2.0mm breakout, Aqua-15M. Pasternack’s PE3FCA409-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 12-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA409-15M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 56 | ||
| PE3C4099 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50. Push-On 4.3-10 Male to 7/16 DIN Male Cable Using RG402 Coax. PE3C4099 is a 4.3-10 male to 7/16 DIN male cable using RG402 coax. This Pasternack 4.3-10 male to 7/16 DIN male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 4.3-10 to male 7/16 DIN cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C4099 4.3-10 male to 7/16 DIN male cable assembly is constructed with RG402 coax. | 0 | |||
| PE3W03409/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male Right Angle to TNC Male Cable Using LMR-195 Coax with HeatShrink. PE3W03409/HS is a N male right angle to TNC male cable using LMR-195 coax. This Pasternack N male right angle to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03409/HS N male right angle to TNC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W05409-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. HN Male to N Male Cable 60 Inch Length Using RG213 Coax., Radio frequency assembly HN male to N male cable 60 inch length using RG213 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to N male cable 60 inch length using RG213 coax, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and type N cable connection on the other. Our HN to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W05409-60 can also be known as a HN plug to N type plug cable assembly and will be shipped same-day as it is purchased. HN plug to type N plug cable assembly PE3W05409-60 is built with RG213 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency HN male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05409-60 can also be used in the other direction and will be type N male to HN male cable assembly if the opposite connectivity is required. HN plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to type N cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to N male cable 60 inch length using RG213 coax. |
| 0 | ||
| PE34093/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Female to SMA Female Bulkhead Cable Using RG316 Coax with HeatShrink. PE34093/HS is a SMA female to SMA female bulkhead cable using RG316 coax. This Pasternack SMA female to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34093/HS SMA female to SMA female bulkhead cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C4098 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50. Push-On 4.3-10 Male to QMA Male Cable Using RG402 Coax. PE3C4098 is a 4.3-10 male to QMA male cable using RG402 coax. This Pasternack 4.3-10 male to QMA male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm QMA for connector 2. Our male 4.3-10 to male QMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C4098 4.3-10 male to QMA male cable assembly is constructed with RG402 coax and the maximum VSWR is 1.21:1. | 0 | |||
| PE3C1409-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable 24 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable 24 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male right angle to TNC male right angle low loss cable 24 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE3C1409-24, can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C1409-24 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1409-24 can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable 24 inch length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3M0409-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P141, RF Cable Type: Coax, RF Cable Specification: PE-P141 datasheet, RF Cable Impedance : 50 Ohm. MIL Size 8 Contact Socket to MIL Size 8 Contact Socket Cable 12 Inch Length Using PE-P141 Coax with HeatShrink, LF Solder. The PE3M0409-12 from Pasternack is a D38999 contact cable assembly that is built with a size 8 M39029 socket contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. The PE3M0409-12 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0409-12 in-series RF cable has 0.8 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. M39029 socket to M39029 socket cable assembly is built with PE-P141, which is a flexible coax type. The Pasternack PE3M0409-12 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 socket to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. |
| 0 | ||
| PE34094LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to N Female Bulkhead Cable Using RG400 Coax with HeatShrink, LF Solder. PE34094LF/HS is a TNC male right angle to N female bulkhead cable using RG400 coax. This Pasternack TNC male right angle to N female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. TNC right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34094LF/HS TNC male right angle to N female bulkhead cable assembly is constructed with RG400 coax. | 0 | |||
![]() Teledyne HiRel | 5962-8751409YA | Teledyne HiRel | PROM, ELECTR. ERASABLE, 8K X 8, 200 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
5962-8961409MXA![]() | Teledyne HiRel | PROM, UV ERASABLE, 128K X 8, 55 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8751409XA | Teledyne HiRel | PROM, ELECTR. ERASABLE, 8K X 8, 200 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8961409MYC![]() | Teledyne HiRel | PROM, UV ERASABLE, 128K X 8, 55 NS ACCESS TIME | 0 | |||
5962-8961409MYA![]() | Teledyne HiRel | PROM, UV ERASABLE, 128K X 8, 55 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| CD4093BMJ/883 | Teledyne HiRel | QUAD 2-INPUT NAND SCHMITT TRIGGER | 0 | |||
![]() Wuhan P&S | MC14094BDR2G![]() | onsemi | 8 Stage Shift/Store Register with Three State Outputs RoHS : Compliant |
| 287,500 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |