| データシートサーチシステム |
|
426G-S08-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() Powell Electronics | 796642-6 | TE Connectivity | 6POS 5.0MM CE VRT HDR,TRM BLK RoHS : Compliant |
| 1,056 | |
| 5-534267-1 | TE Connectivity | TE COMPONENT (REF 5-534267-1) RoHS : Compliant |
| 883 | ||
| 1-640426-1 | TE Connectivity | Connectors RoHS : Not Compliant |
| 660 | ||
| 91-542652-39P | Amphenol Corporation | PLUG |
| 13 | ||
| 91-542647-05S | Amphenol Corporation | PLUG |
| 10 | ||
| 91-542649-15P | Amphenol Corporation | PLUG |
| 9 | ||
| 91-542649-97P | Amphenol Corporation | PLUG |
| 9 | ||
| 91-542648-08E | Amphenol Corporation | PLUG |
| 8 | ||
| 91-542648-98F | Amphenol Corporation | PLUG |
| 8 | ||
| 10-42628-16P | Amphenol Corporation | CONNECTOR |
| 3 | ||
| 91-542601-35P | Amphenol Corporation | RECEPT |
| 3 | ||
| 91-542679-18T | Amphenol Corporation | RECEPT |
| 3 | ||
| 91-542638-35P | Amphenol Corporation | RECEPT |
| 2 | ||
| 91-542649-18W | Amphenol Corporation | PLUG |
| 1 | ||
| 91-542683-35P | Amphenol Corporation | RECEPT |
| 1 | ||
![]() PUI | 12.94260 | 12,340 | ||||
| 12.94265 | 8,324 | |||||
| 12.84266 | 1,037 | |||||
| 12.94264 | 838 | |||||
| 12.94268 | 570 | |||||
| 12.84265 | 319 | |||||
| 12.94262 | 110 | |||||
![]() Richardson RFPD | F426RK225K630CPHE426MR7220KR06L2 | KEMET Corporation | Film Capacitor RoHS : Compliant | 0 | ||
| R404262651 | Radiall | RF COAX TERMINATION | 0 | |||
| 20011426-01 | TE Connectivity | Accelerometer Triple ±500g 3.3V 2.5mV/g 12-PinCLLC RoHS : Compliant | 0 | |||
| 85174263 | HUBER+SUHNER | Cable Assembly Coaxial 0.101m SMPS to SMPS M-M RoHS : Compliant | 0 | |||
| 796642-6 | TE Connectivity | Conn Shrouded Header (4 Sides) M 6 POS 5mm Solder RoHS : Compliant |
| 0 | ||
| LFXTAL053426REEL | IQD Frequency Products | Crystal 16MHz ±50ppm (Tol) ±100ppm (Stability) 8pF RoHS : Compliant |
| 0 | ||
| SI5338A-B04261-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5338K-B14426-GM | Skyworks Solutions Inc | Quad Clock Generator RoHS : Compliant | 0 | |||
| LTC4268IDKD-1#PBF | Analog Devices Inc | Power Over Ethernet PD Controller 32-Pin DFN EP RoHS : Compliant |
| 0 | ||
| LTC4269CDKD-2#TRPBF | Analog Devices Inc | Power Over Ethernet PD Controller 60V 32-Pin DFN E RoHS : Compliant |
| 0 | ||
| J114ZM4-26L | Teledyne Relays | RF RELAY RoHS : Compliant |
| 0 | ||
| ER114M4-26A/S | Teledyne Relays | RF RELAY RoHS : Not Compliant |
| 0 | ||
| 412DVM4-26/SQ | Teledyne Relays | RF RELAY |
| 0 | ||
| R116426000 | Radiall | Conn SMB 0Hz to 4GHz 50Ohm Solder ST Thru-Hole RCP RoHS : Compliant |
| 0 | ||
| R142426020W | Radiall | Conn BNC 0Hz to 1.5GHz 75Ohm Solder ST Thru-Hole R RoHS : Compliant | 0 | |||
![]() Rutronik | Q24FA20H0042614 | Seiko Epson Corporation | FA-20H 16,000000M 8pF 10ppm RoHS : Compliant |
| 17,000 | |
| 10042618-002LF | Amphenol Communications Solutions | PCI-Express RETENTION MECHANISM RoHS : Compliant |
| 12,000 | ||
| D426SURWB/S530-A3 | Everlight Electronics Co Ltd | 7-SEG.DISPL.2DIGIT RED RoHS : Compliant |
| 4,900 | ||
| EX-HA011426 | Amphenol Interconnect Products Inc | PowerLok PL102X ORA RoHS : Compliant |
| 10 | ||
![]() Chip 1 Exchange | 964267-2 | TE Connectivity | INSTOCK RoHS : Compliant | 31,200 | ||
| GRM426Y5V474Z50 | INSTOCK | 10,200 | ||||
| 964268-1 | TE Connectivity | INSTOCK RoHS : Compliant | 5,434 | |||
| MT426410 | INSTOCK | 3,604 | ||||
| GRM42-605X7R562J50 | INSTOCK | 3,500 | ||||
| GRM426COG100C50500 | Murata Manufacturing Co Ltd | INSTOCK | 3,120 | |||
| GRM426C0G100D50500 | Murata Manufacturing Co Ltd | INSTOCK | 2,000 | |||
| GRM426C0G100D50500 | Murata Manufacturing Co Ltd | INSTOCK | 2,000 | |||
| TC4426CPA | INSTOCK | 1,380 | ||||
| 964267-2 | INSTOCK | 1,000 | ||||
| G612M426P3BEBA5D-081 | ITT Interconnect Solutions | INSTOCK | 240 | |||
| PHE426MD6100JR06L2 | INSTOCK | 234 | ||||
| R141426162 | Radial Magnet Inc | INSTOCK | 210 | |||
| DPA426R-TL | POWER | INSTOCK | 147 | |||
| NT-2100426-01 | INSTOCK | 131 | ||||
![]() Braemac Americas-Symmetry | ICM-42605 | TDK Invensense | 6-Axis Flagship Motion Sensor |
| 0 | |
| ICM-42686-P | TDK Invensense | 6-Axis Motion Sensor |
| 0 | ||
| DK-42688-V | TDK Invensense | Development Kit for ICM 42688 V |
| 0 | ||
| QCIOT-ICM42688P | TDK Invensense | PMOD Evaluation Board |
| 0 | ||
| ASEM4-26.000MHZ-LC-T | Abracon Corporation | MEMS OSC XO 26.0000MHZ LVCMOS |
| 0 | ||
| MD-42688-P-XB | TDK Invensense | Expansion board for SmartBug module |
| 0 | ||
| DK-42653 | TDK Invensense | Dev Kit for IIM-42653 |
| 0 | ||
| 91-31426-0670 | ADLINK Technology Inc | 4HP cPCI-6540 with Intel Core i7-9850HL and 16GB, DDR4-2666 soldered memory and 16GB SODIMM with 2x GbE, 2x USB 3.0, 1x RJ-45 COM and single PMC/XMC site |
| 0 | ||
| DK-42652 | TDK Invensense | Dev Kit for IIM-42652 |
| 0 | ||
| AMEPR30N-4260Z | Aimtec | RoHS : Compliant |
| 0 | ||
| ICM-42688-P | TDK Invensense | Next gen low-Power, High-Performance Integrated 6-Axis MEMS MotionTracking Device |
| 0 | ||
| DK-42670-P | TDK Invensense | Development Kit for ICM-42670-P |
| 0 | ||
| AMEPR30NC-4260Z | Aimtec | RoHS : Compliant |
| 0 | ||
| AMER250C-42600Z | Aimtec | RoHS : Compliant |
| 0 | ||
| ICM-42670-N | TDK Invensense | NCNR, High Performance 6-Axis MotionTracking IMU |
| 0 | ||
![]() Chip-Germany GmbH | ICM-42688-P | TDK Invensense | 10,000 | |||
| ICM-42607-P | TDK Invensense | 10,000 | ||||
| ICM-42670-P | TDK Invensense | 10,000 | ||||
| ICM-42607-C | TDK Invensense | 10,000 | ||||
| 09 33 024 2601 | Harmer & Simmons | 5 | ||||
![]() Component Electronics, Inc | GRM42-6C0G390F050BD![]() | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,000 | |
GRM42-6C0G391F050BD![]() | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,000 | ||
| GRM42-6C0G510G100AW | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 4,000 | ||
GRM42-6Y5V105Z016AL![]() | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,685 | ||
| GRM42-6C0G330G100AW | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 2,500 | ||
| GRM42-6C0G8R2C50-500 | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 2,250 | ||
| GRM42-6C0G330J050BE | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 1,320 | ||
| GRM42-6X7R106K16D539 | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 860 | ||
| GRM42-6X7R333K100C500 | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 849 | ||
GRM42-6X7R105K025AD![]() | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 400 | ||
| LH2426S | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 6 | |||
| MS24264R14B15S8 | Cinch Connectivity Solutions | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4 | ||
| MS24264R18B31PY | RMS | IN STOCK SHIP TODAY |
| 4 | ||
| 8734-2611 | Molex | IN STOCK SHIP TODAY |
| 2 | ||
| MS24264R22B55P8 | ITT Interconnect Solutions | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | MS20426A3-3A5 | Military Specifications |
| 378 | ||
| MS20426-A3-3.5 | Military Specifications |
| 24 | |||
| MS20426AD5-10 | Military Specifications |
| 17 | |||
| AENM50KB426 | PennEngineering (PEM) | 1/2 | 0 | |||
| D2-517-426-190 | Southco | This versatile design offers a comprehensive range of low-cost grip-tolerant solutions for high volume production applications. It provides a detent and positive stop for consistent positioning and vibration-resistant performance. Quick-access/quick-rele | 0 | |||
| S6426 | Heyco | SUNBUNDLER 28 100/BAG | 0 | |||
| 09-13-204-26 | Southco | Get the functionality of a quicker screw fastening solution and the ease of more forgiving alignment for frequently accessed applications. These fasteners use a modified Acme thread to combine quick and easy engagement like a quarter-turn fastener pr | 0 | |||
| AENM50B426 | PennEngineering (PEM) | 1/2 | 0 | |||
| RRH-142-64-150 | Essentra Components | 0 | ||||
| 4542-632-A | RAF Electronic Hardware | SPACER | 0 | |||
| 465426 | Essentra Components | 0 | ||||
| 42669 | Pop Rivets | PNT600-57 | 0 | |||
| AEA50-426 | PennEngineering (PEM) | 1/2 | 0 | |||
| 84-26-101-73 | Southco | 0 | ||||
| AESS50R426 | PennEngineering (PEM) | 1/2 | 0 | |||
![]() EBV Elektronik | NCV4264-2CST50T3G | onsemi | (Alt: NCV4264-2CST50T3G) RoHS : Compliant | 96,000 | ||
| TLE42642GHTMA1 | Infineon Technologies AG | LDO Voltage Regulator AECQ100 Fixed 5545V in 220 mV Drop 5 V150 mA out SOT2234 (Alt: SP005122430) RoHS : Compliant | 52,000 | |||
| KBDELSS2.12-THUH-34-2686-20-R18 | ams OSRAM Group | (Alt: Q65113A3855) RoHS : Compliant | 9,000 | |||
| SIA4263DJ-T1-GE3 | Vishay Intertechnologies | (Alt: SIA4263DJ-T1-GE3) RoHS : Compliant | 6,000 | |||
| IR4426STRPBF | Infineon Technologies AG | MOSFET DRVR 33A 2OUT Lo Side Inv 8Pin SOIC TR (Alt: SP001540232) RoHS : Compliant | 5,000 | |||
| TS4264CW50 RPG | Taiwan Semiconductor | LDO Regulator Pos 5V 150mA 4Pin SOT223 TR (Alt: TS4264CW50 RPG) RoHS : Compliant | 2,500 | |||
TC426EOA![]() | Microchip Technology Inc | MOSFET DRVR 15A 2OUT Lo Side Inv 8Pin SOIC N Tube (Alt: TC426EOA) RoHS : Compliant | 1,300 | |||
| CS14263_HB-IP-2X6-WWW | LEDIL | LED Array Rectangle Lens Assembly For Oslon Square PC XTE XPL LED (Alt: CS14263_HB-IP-2X6-WWW) RoHS : Compliant | 960 | |||
TC426CPA![]() | Microchip Technology Inc | MOSFET DRVR 15A 2OUT Lo Side Inv 8Pin PDIP Tube (Alt: TC426CPA) RoHS : Compliant | 240 | |||
TC426IJA![]() | Microchip Technology Inc | (Alt: TC426IJA) RoHS : Compliant | 56 | |||
MCP3426A0T-E/SN![]() | Microchip Technology Inc | (Alt: MCP3426A0T-E/SN) RoHS : Compliant | 0 | |||
MCP4261-104E/SL![]() | Microchip Technology Inc | Digital Potentiometer NonVolatile 100 kOhm Dual 257 Steps 150 ppmC 27 V to 55 V (Alt: MCP4261-104E/SL) RoHS : Compliant | 0 | |||
MCP4261-502E/ML![]() | Microchip Technology Inc | Digital Potentiometer NonVolatile 5 kOhm Dual 257 Steps 150 ppmC 27 V to 55 V 16 Pins (Alt: MCP4261-502E/ML) RoHS : Compliant | 0 | |||
| PIC16F18426T-I/JQ | Microchip Technology Inc | MCU 8Bit PIC RISC 28KB Flash 18V to 55V 16Pin UQFN TR (Alt: PIC16F18426T-I/JQ) RoHS : Compliant | 0 | |||
| CA11426_STRADA-T-DW | LEDIL | Lens For 119 219 LEDs Extremely Wide Batwing Design With Very And Uniform Light Distribution (Alt: CA11426_STRADA-T-DW) RoHS : Compliant | 0 | |||
![]() ECCO | 024269-0002 | ITT Interconnect Solutions | RoHS : Not Compliant |
| 190 | |
| 024264-0003 | ITT Interconnect Solutions | RoHS : Not Compliant |
| 103 | ||
![]() Maritex | 174264-2 | TE Connectivity | Automotive Connectors; 174264-2; TE CONNECTIVITY; Black; 6; Yes; 35.5 mm RoHS : Compliant |
| 15,940 | |
| 794269-1 | TE Connectivity | Connectors Accessories; 794269-1; TE CONNECTIVITY; Blue; 2; No; 2 RoHS : Compliant |
| 9,898 | ||
| 534260410 | Molex | Male Pin Headers; 534260410; MOLEX; 1; Right Angle; Tin; 4 RoHS : Compliant |
| 7,638 | ||
| 3-640426-6 | TE Connectivity | Panel Mount Connectors; 3-640426-6; TE CONNECTIVITY; 6; 1; Orange; Tin RoHS : Compliant |
| 5,760 | ||
| 534260910 | Molex | Male Pin Headers; 534260910; MOLEX; 1; Tin; 9; 9 RoHS : Compliant |
| 2,230 | ||
| 5031542690 | Molex | Female Socket Headers; 5031542690; MOLEX; 2; 26; Tin; Yes RoHS : Compliant |
| 1,819 | ||
| 206426-1 | TE Connectivity | Circular Connectors; 206426-1; TE CONNECTIVITY; 3; Cable, Free Hanging; 3; Pin RoHS : Compliant |
| 770 | ||
| 534260510 | Molex | Male Pin Headers; 534260510; MOLEX; 1; Right Angle; Tin; 5 RoHS : Compliant |
| 750 | ||
| 534260310 | Molex | Male Pin Headers; 534260310; MOLEX; 1; Right Angle; Tin; 3 |
| 575 | ||
| 534260810 | Molex | Male Pin Headers; 534260810; MOLEX; 1; Tin; Right Angle; 8 |
| 304 | ||
| 174265-7 | TE Connectivity | Rectangular Connector Housings; 174265-7; TE CONNECTIVITY; 6; Yellow RoHS : Compliant |
| 32 | ||
| 104-26PTWNS SELECTIVE | Xinya Electronics Co Ltd | D-Sub Connector; male; 26 contacts; 3 rows |
| 14 | ||
| DF14-2628SCFA | Hirose Electric Co Ltd | Terminal Accessories; DF14-2628SCFA; HIROSE ELECTRIC; Gold; Crimp; 1 A; Plug RoHS : Compliant |
| 13 | ||
| 104-26STWNS SELECTIVE | Xinya Electronics Co Ltd | D-Sub Connector; female; male; 26 contacts; 3 rows |
| 8 | ||
| 4-640426-6 | TE Connectivity | Panel Mount Connectors; 4-640426-6; TE CONNECTIVITY; 16; 1; Orange; Tin RoHS : Compliant |
| 8 | ||
![]() Pasternack Enterprises US | PE4262 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: SMC, Connector Gender: Plug, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 10 GHz, Interface Type 1: RG174, Interface Type 2: RG316, Interface Type 3: RG188, Interface Type 4: LMR-100, Interface Type 5: PE-B100, Interface Type 6: PE-C100, Interface Type 7: .100 inch. SMC Plug Right Angle Connector Clamp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, 0.100 inch. PE4262 SMC plug right angle coaxial connector has an interface type of RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, .100 inch and a 50 Ohm impedance. Pasternack SMC plug connector uses shield/contact clamp/solder as an attachment method. Our plug SMC right angle coaxial connector provides a minimum frequency of DC and a maximum frequency of 10 GHz. The Pasternack right angle SMC plug coaxial connector has a PTFE dielectric type. The Pasternack SMC coaxial connector has a brass body with nickel plating. Our PE4262 SMCright angle connector uses beryllium copper contact. This SMC plug right angle coaxial RF connector is RoHS and REACH compliant. This Pasternack right angle plug SMC connector will ship the same day as purchased. Our SMC right angle plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMC connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave. |
| 1,651 | |
| PE34268 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50. SMA Male to N Male Cable Using PE-SR047FL Coax. PE34268 is a SMA male to type N male cable using PE-SR047FL coax. This Pasternack SMA male to N type male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm type N for connector 2. Our male SMA to male N type cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE34268 SMA male to type N male cable assembly is constructed with PE-SR047FL coax. | 1,318 | |||
| PE34268-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to N Male Cable 18 Inch Length Using PE-SR047FL Coax., Radio frequency assembly SMA male to N male cable 18 inch length using PE-SR047FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 18 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to N type cable assemblies have a male gender on end 1 and male on end 2. This SMA to N type cable is a male to male coax assembly, PE34268-18, can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE34268-18 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34268-18 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 18 inch length using PE-SR047FL coax. |
| 200 | ||
| PE4264 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: SMB, Connector Gender: Plug, Impedance: 75 Ohm, Body Style: Right Angle, Attachment Method: Clamp/Solder, Mount Method: None, Interface Type 1: RG59, Interface Type 2: RG62. 75 Ohm SMB Plug Right Angle Connector Clamp/Solder Attachment For RG59, RG62. PE4264 SMB plug right angle coaxial connector has an interface type of RG59, RG62 and a 75 Ohm impedance. Pasternack SMB plug connector uses shield/contact clamp/solder as an attachment method. The Pasternack right angle SMB plug coaxial connector has a teflon dielectric type. The Pasternack SMB coaxial connector has a brass body with nickel plating. This SMB plug right angle coaxial RF connector is RoHS and REACH compliant. This Pasternack right angle plug SMB connector will ship the same day as purchased. Our SMB right angle plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMB connector cable assemblies that will ship the same day as well. |
| 99 | ||
| PE3W17842-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to N Female Bulkhead Cable 6 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 6 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 6 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3W17842-6 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17842-6 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. 2.92mm plug to type N jack cable assembly PE3W17842-6 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17842-6 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements. |
| 21 | ||
| PE3M0426-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMZ, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 Contact Pin to BMZ Size 8 Contact Socket Cable 48 Inch Length Using PE-SR405FL Coax with Heat Shrink, LF Solder. The PE3M0426-48 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a BMZ socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to BMZ cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to BMZ socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0426-48 in-series RF cable has 0.78 inches of repeated minimum bend radius. BMZ pin to BMZ socket cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0426-48 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to BMZ RF cable are available on our downloadable PDF datasheet. BMZ pin to BMZ socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to BMZ RF cable assembly as per your requirements. |
| 8 | ||
| PE3MSA00542-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Lead Free 78 Ohm 3-Slot TRB Solder/Clamp Plug to 3-Lug TRB Solder/Clamp Jack for PE-30-02001 Twinax (.242 O.D.) 60" Cable., Radio frequency assembly lead free 78 Ohm 3-Slot TRB solder/clamp plug to 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 78 Ohm 3-Slot TRB solder/clamp plug to 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 60" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00542-60 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MSA00542-60 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00542-60 can also be used in the other direction and will be TRB jack to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 78 Ohm 3-Slot TRB solder/clamp plug to 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 60" cable. |
| 3 | ||
| PE39842-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. BNC Male Right Angle to BNC Female Cable 6 Inch Length Using RG316-DS Coax., Radio frequency assembly BNC male right angle to BNC female cable 6 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to BNC female cable 6 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and BNC cable connection on the other. Our right angle BNC to BNC cable assembly has male gender on end 1 and female on end 2. PE39842-6 can also be known as a right angle BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. BNC plug to BNC jack cable assembly PE39842-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE39842-6 RF cable are available on our downloadable PDF datasheet.PE39842-6 can also be used in the other direction and will be BNC female to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE34261LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to N Male Cable 12 Inch Length Using PE-SR047AL Coax., Radio frequency assembly SMA male to N male cable 12 inch length using PE-SR047AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 12 inch length using PE-SR047AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to N type cable is a male to male coax assembly, PE34261LF-12, can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE34261LF-12 is built with PE-SR047AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34261LF-12 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 12 inch length using PE-SR047AL coax. |
| 0 | ||
| PE3W08426 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to N Male Cable Using RG178 Coax. PE3W08426 is a SMA female bulkhead to N male cable using RG178 coax. This Pasternack SMA female bulkhead to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our female SMA bulkhead to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08426 SMA female bulkhead to N male cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W17426/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to BNC Male Right Angle Cable Using RG174 Coax with HeatShrink. PE3W17426/HS is a reverse polarity SMA female to BNC male right angle cable using RG174 coax. This Pasternack reverse polarity SMA female to BNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity female SMA to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17426/HS SMA reverse polarity female to BNC male right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W24266 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to N Female 4 Hole Flange Cable Using RG405 Coax. PE3W24266 is a MMCX plug right angle to N female 4 hole flange cable using RG405 coax. This Pasternack MMCX plug right angle to N female 4 hole flange cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm N for connector 2. MMCX right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to female N 4 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W24266 MMCX plug right angle to N female 4 hole flange cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W24265 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to N Female 4 Hole Flange Cable Using RG188 Coax. PE3W24265 is a MMCX plug right angle to N female 4 hole flange cable using RG188 coax. This Pasternack MMCX plug right angle to N female 4 hole flange cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm N for connector 2. MMCX right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to female N 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24265 MMCX plug right angle to N female 4 hole flange cable assembly is constructed with RG188 coax. | 0 | |||
| PE3W04260 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 2.92mm Female to 3.5mm Female Cable Using RG405 Coax. PE3W04260 is a 2.92mm female to 3.5mm female cable using RG405 coax. This Pasternack 2.92mm female to 3.5mm female cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our female 2.92mm to female 3.5mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04260 2.92mm female to 3.5mm female cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W24268 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to N Female 4 Hole Flange Cable Using PE-SR405FLJ Coax. PE3W24268 is a MMCX plug right angle to N female 4 hole flange cable using PE-SR405FLJ coax. This Pasternack MMCX plug right angle to N female 4 hole flange cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm N for connector 2. MMCX right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to female N 4 hole flange cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W24268 MMCX plug right angle to N female 4 hole flange cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
![]() Venkel Ltd. | SMPI808042-680NU | VENKEL LTD | Square Miniature Power Inductor;808042;68uH;�30% RoHS : Compliant | 0 | ||
| SMPI808042-6R8MU | VENKEL LTD | Square Miniature Power Inductor;808042;6.8uH;�20% RoHS : Compliant | 0 | |||
| SMPI808042-681MU | VENKEL LTD | Square Miniature Power Inductor;808042;680uH;�20% RoHS : Compliant | 0 | |||
| SMPI808042-681NU | VENKEL LTD | Square Miniature Power Inductor;808042;680uH;�30% RoHS : Compliant | 0 | |||
| ICM-42688-P | VENKEL LTD | Accelerometer; Gyroscope RoHS : Not Compliant | 0 | |||
| CRN16-4-2611FT | VENKEL LTD | Chip Resistor Array;CRN16;4;2.61K;�1%;Convex RoHS : Compliant | 0 | |||
| SMPI808042-680MU | VENKEL LTD | Square Miniature Power Inductor;808042;68uH;�20% RoHS : Compliant | 0 | |||
| SMPI808042-6R8NU | VENKEL LTD | Square Miniature Power Inductor;808042;6.8uH;�30% RoHS : Compliant | 0 | |||
![]() Vyrian | MAX44265EVKIT | Analog Devices (Maxim Integrated) | 11,615 | |||
| IP4264CZ8-20-TTL | Nexperia | Data Line Filter, 3 Function(s), 2.5V, 8 Pin(s) RoHS : Compliant | 11,512 | |||
| MAX6426UK25+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.5V, BICMOS, PDSO5 RoHS : Compliant | 10,101 | |||
| MAX4426ESA+T | Analog Devices Inc | Buffer/Inverter Based MOSFET Driver, 1.5A, CMOS, PDSO8 RoHS : Compliant | 9,798 | |||
| LTC4268IDKD-1#PBF | Analog Devices Inc | Switching Controller, Current-mode, 1.65A, 250kHz Switching Freq-Max, PDSO32 RoHS : Compliant | 7,953 | |||
| 58426HV | Honeywell Sensing And Control | Magnetoresistive Sensor, 350mV, Cylindrical | 7,837 | |||
| LTC4268IDKD-1-TRPBF | Analog Devices Inc | 7,279 | ||||
| AD42622-REEL7 | Analog Devices Inc | 6,493 | ||||
| LTC4268IDKD-1#TR | Analog Devices Inc | Switching Controller, Current-mode, 1.65A, 250kHz Switching Freq-Max, PDSO32 RoHS : Not Compliant | 6,481 | |||
| PIC16LF18426-E/ST | Microchip Technology Inc | RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PDSO14 RoHS : Compliant | 4,906 | |||
| KF426C16BB1A/16 | Kingston Technology Company | 4,695 | ||||
MAX4426EPA![]() | Maxim Integrated Products | Buffer/Inverter Based MOSFET Driver, 1.5A, CMOS, PDIP8 RoHS : Not Compliant | 3,953 | |||
MAX7426EUA![]() | Maxim Integrated Products | Switched Capacitor Filter, 1 Func, Elliptic, Lowpass, BICMOS, PDSO8 RoHS : Not Compliant | 839 | |||
LTC4267IGN-1![]() | Linear Technology | Switching Controller, Current-mode, 1A, 240kHz Switching Freq-Max, PDSO16 RoHS : Not Compliant | 603 | |||
| MS24264R14T4PY | Defense Logistics Agency | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle | 452 | |||
![]() Waytek, Inc. | 7100164267 | 3M | 10-12GA #10 Stud Terminal Heat Shrink Sealed |
| 18,767 | |
| 12034269 | Aptiv PLC | 2-Way Metri-Pack 630 Connector Male DELPHI # 12034269 RoHS : Compliant |
| 5,722 | ||
| 15326426 | Aptiv PLC | 20 GA Female Terminal GT 150 Gold Plated DELPHI 15326426 4000/Reel RoHS : Compliant |
| 4,000 | ||
| 15326426-L | Aptiv PLC | 20 GA Female Terminal GT 150 Gold Plated DELPHI 15326426 Loose Piece |
| 2,418 | ||
| 12124264 | Aptiv PLC | Metri-Pack 10 Contact TPA Gray #12124264 150 Series RoHS : Compliant |
| 1,151 | ||
| DG-19426 | Essentra Components | Diaphragm Grommet - 16mm|.63in 11mm | .433in, 1 |
| 775 | ||
| 7100164266 | 3M | 12-10 GA #8 Ring Terminal Heat Shrink Sealed |
| 487 | ||
| 7100164268 | 3M | 12-10GA Heat Shrink Snap Spade #10 STUD |
| 158 | ||
| 4266-001 | QuickCable Corporation | Crimper Hammer Tool 8GA 4/0 BATTERY LUGS |
| 72 | ||
![]() Win Source Electronics | HSDL-4261 | Lite-On Semiconductor Corporation | High-Power T-1¾ (5mm) AlGaAs Infrared (870nm) Lamp | EMITTER IR 870NM 100MA RADIAL RoHS : Compliant |
| 161,500 | |
TLE2426IDR![]() | Texas Instruments | IC VREF GND REF ADJ 8SOIC RoHS : Compliant |
| 44,360 | ||
BQ27426YZFT![]() | Texas Instruments | SYSTEM-SIDE IMPEDANCE TRACK FUEL / Fuel Gauge Li-Ion/Li-Pol 9-Pin DSBGA T/R RoHS : Compliant |
| 30,470 | ||
BQ24266RGER![]() | Texas Instruments | IC BATT CHARGER LI-ION 24VQFN / Switching Battery Charger Li-Ion 3000mA 24-Pin VQFN EP T/R RoHS : Not Compliant |
| 16,235 | ||
| 794269-1 | TE Connectivity | CONN INTERFACE SEAL 2POS UMNL RoHS : Compliant |
| 14,000 | ||
| IP4264CZ8-20-TTL | Nexperia | RoHS : Compliant |
| 11,978 | ||
| ICM-42605 | TDK Invensense | IMU ACCEL/GYRO/TEMP I2C/SPI LGA |
| 10,550 | ||
| IPS4260L | STMicroelectronics | IC PWR SWTCH P-CHAN 1:1 20HTSSOP / Power Switch/Driver 1:1 N-Channel 2A 20-HTSSOP RoHS : Compliant |
| 10,000 | ||
TC4426AVOA713![]() | Microchip Technology Inc | IC MOSFET DVR 1.5A DUAL HS 8SOIC RoHS : Compliant |
| 9,900 | ||
| ICS9LPR426BGLFT | Integrated Device Technology Inc |
| 4,600 | |||
| AD8426ACPZ | Analog Devices Inc | Wide Supply Range, Dual R-R-O InAmp |
| 3,000 | ||
| PE426482A-X | pSemi | RF Switch SP8T 10MHz to 8GHz 25dB RoHS : Compliant |
| 1,825 | ||
ADG426BRS![]() | Analog Devices Inc | IC MULTIPLEXER 16X1 28SSOP RoHS : Not Compliant |
| 1,500 | ||
| MIC4426BM-TR | Microchip Technology Inc | IC DRIVER MOSFET 1.5A DUAL 8SOIC |
| 680 | ||
LTC4269IDKD-1#TRPBF![]() | Linear Technology | IC POE 802.3AT PD W/REG 32-DFN RoHS : Compliant |
| 470 | ||
![]() Wuhan P&S | NCV4266-2CST50T3G | onsemi | 150mA,5.0V Fixed Out LDO Linear Regulator with Enable RoHS : Compliant |
| 32,000 | |
| NCV4264-2CST33T3G | onsemi | RoHS : Compliant |
| 16,000 | ||
| NCV4264-2CST50T3G | onsemi | 100mA,5.0V,LDO,Linear Voltage Regulator RoHS : Compliant |
| 7,000 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |