 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
4533-R10-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 Ameya Holding Limited | ESR03EZPF4533 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 25,000 | |
| KTR03EZPF4533 | ROHM Semiconductor | High Voltage Resistance Chip Resistors RoHS : Unknown |
| 10,000 | ||
| SDR03EZPF4533 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 5,000 | ||
 ComSIT USA | TPS7A4533DCQR | TEXAS INSTRUMENTS INC | AVAILABLE EU | 1,875 | ||
ComSIT USA | CKCS604533UHM | Cenker Coil | Electronic Component RoHS : Not Compliant | 15,000 | ||
| BFC236545333 | Vishay Intertechnologies | Film Capacitor, Polyester, 250V, 10% +Tol, 10% -Tol, 0.033uF, Through Hole Mount RoHS : Not Compliant | 6,000 | |||
| SDR7045330M | Bourns Inc | SMD POWER INDUCTOR General Purpose Inductor, 33uH, 20%, 1 Element, Ferrite-Core, SMD, 2828 RoHS : Compliant | 1,000 | |||
| 235453331017 | WAGO Innovative Connections | Electronic Component RoHS : Compliant | 840 | |||
| CY7C45330JC | Cypress Semiconductor | 2KX9 CASCADABLE CLOCKED FIFO WITH PROGRAMMABLE FLAGS FIFO, 2KX9, 20ns, Synchronous, CMOS, PQCC32 RoHS : Not Compliant | 400 | |||
| ERJ6ENF4533V | Panasonic Electronic Components | PRECISION THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.125W, 453000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Not Compliant | 45 | |||
| 4533600 | Trimble Navigation Limited | Electronic Component RoHS : Not Compliant | 40 | |||
 NexGen Digital | OSC066050D-45-3.3-TS-TR | SQC Technology Ltd | 624 | |||
 PEI Genesis | 71-453314-06S | Amphenol Corporation |
| 618 | ||
| DPXB-45-33S-0120 | ITT Interconnect Solutions |
| 0 | |||
| DPXB-45-33S-0201 | ITT Interconnect Solutions |
| 0 | |||
| AP-145/3-3 | Amphenol Corporation |
| 0 | |||
| 104-533-9042 | SOURIAU-SUNBANK |
| 0 | |||
| 104-533-9024 | SOURIAU-SUNBANK |
| 0 | |||
| DPD-45-33S-1B | ITT Interconnect Solutions |
| 0 | |||
| 104-533-9025 | SOURIAU-SUNBANK |
| 0 | |||
| DPXAMA-45-33S | ITT Interconnect Solutions |
| 0 | |||
| DPXBME-45-33S-0000 | ITT Interconnect Solutions |
| 0 | |||
| 104-533-9045 | SOURIAU-SUNBANK |
| 0 | |||
| 45-333 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| DPDMA-45-33S-1L | ITT Interconnect Solutions |
| 0 | |||
| 104-533-9023 | SOURIAU-SUNBANK |
| 0 | |||
| 2DD96453-3 | ITT Interconnect Solutions |
| 0 | |||
 Rutronik | RK73H2ATTD4533F | KOA Speer Electronics Inc | RC0805 453K 1% 0,25W TK100 RoHS : Compliant |
| 15,000 | |
| BWVS00606045331M00 | Pulse Electronics Corporation | BWVS606045 330uH 350mA 20% WWT RoHS : Compliant |
| 2 | ||
 Chip 1 Exchange | ERJ-2RKF4533X | Panasonic Electronic Components | INSTOCK | 7,404 | ||
| 164533-4 | TE Connectivity | INSTOCK RoHS : Compliant | 6,765 | |||
| CR16-4533-F# | ASJ Holdings Limited | INSTOCK | 3,096 | |||
| ERJ-3EKF4533V | INSTOCK | 2,553 | ||||
| RC1005F4533CS | Samsung Electro-Mechanics | INSTOCK RoHS : Compliant | 510 | |||
CY7C453-30JC | Cypress Semiconductor | INSTOCK RoHS : Not Compliant | 451 | |||
| CY7C45330JC | INSTOCK | 436 | ||||
MAX4533CAP | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 116 | |||
| 164533-4 | INSTOCK | 12 | ||||
| 1D49345-33 | INSTOCK | 8 | ||||
 Avnet Silica | ACT4533BYH-T | Qorvo | (Alt: ACT4533BYH-T) RoHS : Compliant | 0 | ||
| ACT4533AYH-T | Qorvo | (Alt: ACT4533AYH-T) RoHS : Compliant | 0 | |||
| DA14533-00A02RN2 | Renesas Electronics Corporation | (Alt: DA14533-00A02RN2) RoHS : Compliant | 0 | |||
| DA14533-00RNDB-P | Renesas Electronics Corporation | (Alt: DA14533-00RNDB-P) RoHS : Compliant | 0 | |||
MIC5245-3.3YM5-TR | Microchip Technology Inc | (Alt: MIC5245-3.3YM5-TR) RoHS : Compliant | 0 | |||
| F14533_ANGELETTE-M | LEDIL | LEDF14533ANGELETTEM (Alt: F14533_ANGELETTE-M) RoHS : Compliant | 0 | |||
| DA14533-00RNDEVKT-P | Renesas Electronics Corporation | (Alt: DA14533-00RNDEVKT-P) RoHS : Compliant | 0 | |||
 Chip-Germany GmbH | RT4533GJ6 | Richtek Technology Corp | RoHS : Compliant | 371 | ||
 EBV Elektronik | HFBR-4533Z | Broadcom Limited | Conn Fiber Optic Simplex Plug Straight Cable Mount (Alt: HFBR-4533Z) RoHS : Compliant | 15,000 | ||
STIEC45-33AS | STMicroelectronics | Transient Voltage Suppressor Unidirectional 33V standoff 500A DO214 (Alt: STIEC45-33AS) RoHS : Compliant | 0 | |||
TLE824533SAAUMA1 | Infineon Technologies AG | 3 Channel HighSide and LowSide Linear Solenoid Driver IC 36Pin DSO TR (Alt: SP001257854) RoHS : Compliant | 0 | |||
| MIC5245-3.3YM5-TR | Microchip Technology Inc | (Alt: MIC5245-3.3YM5-TR) RoHS : Compliant | 0 | |||
| F14533_ANGELETTE-M | LEDIL | LEDF14533ANGELETTEM (Alt: F14533_ANGELETTE-M) RoHS : Compliant | 0 | |||
| SGM2045-3.30XXDH4G/TR | SG Micro Corp | LDO Voltage Regulator Fixed 11 to 55V in 70 mV Drop 33V 03A Out XTDFNEP4 40 to 125 C (Alt: SGM2045-3.30XXDH4G/TR) RoHS : Compliant | 0 | |||
 FDH Electronics | M16878/4-BFE-4/5-.333" | Whitmore/Wirenetics | Wire and Cable | 11,000 | ||
| RNC60H4533FS | Vishay Intertechnologies | Other Products | 499 | |||
| SAE J1453-3 6 520112C | WORLD WIDE FITTINGS INC | Uncategorized | 99 | |||
| SAE J1453-3 12 520112C | WORLD WIDE FITTINGS INC | Uncategorized | 24 | |||
| 104-533-9043 | SOURIAU-SUNBANK | Connector Acc |
| 0 | ||
| 104-533-9022 | SOURIAU-SUNBANK | Backshells & Ac |
| 0 | ||
 Flip Electronics | CY8C24533-24PVXIT | Cypress Semiconductor | Stock | 46,732 | ||
| CY8C24533-24PVXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 46,732 | ||
 Maritex | RNP18-NR6045-330M | RDA Microelectronics | Inductor; SMD; 33uH; 1.5A; 0.188R; 6.0x6.0x4.5mm; 20% |
| 2,722 | |
| SRN6045-330M | Bourns Inc | Inductor; SMD; 33uH; 1.5A; 0.188R; 6x6x4.5mm; 20% RoHS : Compliant |
| 609 | ||
| RPS-45-3.3 | Mean Well | Power Supply; medical; 26.4W; 3.3V; 8A; 80-264VAC RoHS : Compliant |
| 3 | ||
 Pasternack Enterprises US | PE3W04533 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Plug to N Male Right Angle Low Loss Cable Using LMR-195 Coax., Radio frequency assembly reverse polarity SMA plug to N male right angle low loss cable using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to N male right angle low loss cable using LMR-195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle type N cable connection on the other. Our low loss reverse polarity SMA to right angle type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W04533 can also be known as a low loss reverse polarity SMA male to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to type N plug cable assembly PE3W04533 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04533 can also be used in the other direction and will be right angle N type male to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to N male right angle low loss cable using LMR-195 coax. | 590 | ||
| PE3C3453-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 36 inches. BNC Male to BNC Female Cable 36 Inch Length Using RG188 Coax., Radio frequency assembly BNC male to BNC female cable 36 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC female cable 36 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE3C3453-36, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE3C3453-36 is built with RG188 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3453-36 can also be used in the other direction and will be BNC female to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC female cable 36 inch length using RG188 coax. |
| 555 | ||
| PE3W04533-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Reverse Polarity SMA Plug to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-195 Coax., Radio frequency assembly reverse polarity SMA plug to N male right angle low loss cable 36 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to N male right angle low loss cable 36 inch length using LMR-195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle type N cable connection on the other. Our low loss reverse polarity SMA to right angle type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W04533-36 can also be known as a low loss reverse polarity SMA male to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to type N plug cable assembly PE3W04533-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04533-36 can also be used in the other direction and will be right angle type N male to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to N male right angle low loss cable 36 inch length using LMR-195 coax. |
| 118 | ||
| PE3W04533-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Plug to N Male Right Angle Low Loss Cable 24 Inch Length Using LMR-195 Coax., Radio frequency assembly reverse polarity SMA plug to N male right angle low loss cable 24 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to N male right angle low loss cable 24 inch length using LMR-195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle type N cable connection on the other. Our low loss reverse polarity SMA to right angle type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W04533-24 can also be known as a low loss reverse polarity SMA male to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to N type plug cable assembly PE3W04533-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04533-24 can also be used in the other direction and will be right angle type N male to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to N male right angle low loss cable 24 inch length using LMR-195 coax. |
| 118 | ||
| PE3W04533-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Reverse Polarity SMA Plug to N Male Right Angle Low Loss Cable 60 Inch Length Using LMR-195 Coax., Radio frequency assembly reverse polarity SMA plug to N male right angle low loss cable 60 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to N male right angle low loss cable 60 inch length using LMR-195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle type N cable connection on the other. Our low loss reverse polarity SMA to right angle N type cable assemblies have a plug gender on end 1 and male on end 2. PE3W04533-60 can also be known as a low loss reverse polarity SMA male to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to N type plug cable assembly PE3W04533-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04533-60 can also be used in the other direction and will be right angle N type male to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to N male right angle low loss cable 60 inch length using LMR-195 coax. |
| 118 | ||
| PE3C4453-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 36 inches. SSMC Plug to TNC Male Cable 36 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SSMC plug to TNC male cable 36 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug to TNC male cable 36 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and TNC cable connection on the other. Our SSMC to TNC cable assemblies have a plug gender on end 1 and male on end 2. This SSMC to TNC cable is a plug to male coax assembly, PE3C4453-36, can also be known as a SSMC male to TNC plug cable assembly and will be shipped same-day as it is purchased. SSMC male to TNC plug cable assembly PE3C4453-36 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SSMC cable assembly is manufactured with SSMC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SSMC plug to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4453-36 can also be used in the other direction and will be TNC male to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to TNC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to TNC male cable 36 inch length using PE-SR405FLJ coax. |
| 57 | ||
| PE45334 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: BMA, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: 4 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 22 GHz, Interface Type 1: Stub. BMA Jack Slide-On Connector Solder Attachment 4 Hole Flange Mount Stub Terminal, .340 inch Hole Spacing. PE45334 BMA jack 4 hole flange terminal slide-on connector has an interface type of stub and a 50 Ohm impedance. Pasternack BMA jack 4 hole flange connector uses shield/contact solder as an attachment method. Our jack BMA terminal connector provides a minimum frequency of DC and a maximum frequency of 22 GHz. The Pasternack BMA jack 4 hole flange terminal slide-on connector has a PTFE dielectric type and a VSWR of 1.25. The Pasternack BMA terminal connector has a passivated stainless steel body. Our PE45334 BMA connector uses beryllium copper contact and a gold plating material. This BMA jack 4 hole flange terminal slide-on RF connector is REACH compliant. This Pasternack jack BMA 4 hole flange connector will ship the same day as purchased. Our 4 hole flange BMA jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BMA connector cable assemblies that will ship the same day as well. |
| 50 | ||
| PE45335 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: BMA, Connector Gender: Plug, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 22 GHz, Interface Type 1: Thru Hole. BMA Plug Slide-On Connector Solder Attachment Thru Hole PCB, Extended Version. PE45335 BMA plug pcb slide-on connector has an interface type of thru hole and a 50 Ohm impedance. Pasternack BMA plug connector uses shield/contact solder as an attachment method. Our plug BMA pcb connector provides a minimum frequency of DC and a maximum frequency of 22 GHz. The Pasternack BMA plug pcb slide-on connector has a PTFE dielectric type and a VSWR of 1.25. The Pasternack BMA pcb connector has a stainless steel body with gold plating. Our PE45335 BMA connector uses beryllium copper contact. This BMA plug pcb slide-on RF connector is REACH compliant. This Pasternack plug BMA connector will ship the same day as purchased. Our BMA plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BMA connector cable assemblies that will ship the same day as well. |
| 29 | ||
| PE3MSA00453-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. Lead Free 3-Lug TRB Jack with Blunt Cut for 78 Ohm M17/176-00002, 36" Cable., Radio frequency assembly lead free 3-Lug TRB jack with blunt cut for 78 Ohm M17/176-00002, 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 3-Lug TRB jack with blunt cut for 78 Ohm M17/176-00002, 36" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00453-36 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00453-36 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 GHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00453-36 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 3-Lug TRB jack with blunt cut for 78 Ohm M17/176-00002, 36" cable. |
| 28 | ||
| PE34453-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 36 inches. SC Male to SC Male Cable 36 Inch Length Using RG400 Coax., Radio frequency assembly SC male to SC male cable 36 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SC male to SC male cable 36 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SC to SC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SC cable connection on one end and SC cable connection on the other. Our SC to SC cable assemblies have a male gender on end 1 and male on end 2. This SC to SC cable is a male to male coax assembly, PE34453-36, can also be known as a SC plug to SC plug cable assembly and will be shipped same-day as it is purchased. SC plug to SC plug cable assembly PE34453-36 is built with RG400 which is a flexible coax type. The Pasternack flexible SC cable assembly is manufactured with SC to SC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SC male to SC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SC plug to SC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SC to SC cable assembly for quick shipment worldwide. Variations of SC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SC male to SC male cable 36 inch length using RG400 coax. |
| 4 | ||
| PE7453-30 | Pasternack Enterprises | Key Specifications. Design Fixed Maximum Frequency 6 GHz Impedance 50 Ohm Power Maximum 100 Watt VSWR Maximum 1.35:1 Attenuation 30 dB Connector Series 1 4.3-10 Connector Gender 1 Male Connector Series 2 4.3-10 Connector Gender 2 Female Body Material Aluminum Body Plating Black Anodized. 30 dB Fixed Attenuator, 4.3-10 Male to 4.3-10 Female Rated to 100 Watts Up to 6 GHz. PE7453-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line resistive pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 4.3-10 attenuator has a male gender on side 1 and a 4.3-10 female connector on side 2. The Pasternack PE7453-30 30 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7453-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 1 | ||
| PE3W14533 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to SMA Male Cable Using LMR-100A-UF Coax. PE3W14533 is a BNC male right angle to SMA male cable using LMR-100A-UF coax. This Pasternack BNC male right angle to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. BNC right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14533 BNC male right angle to SMA male cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE45333 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: BMA, Connector Gender: Plug, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: Surface Mount. BMA Plug Right Angle Slide-On Connector Solder Attachment Surface Mount PCB. PE45333 BMA plug right angle pcb slide-on connector has an interface type of surface mount and a 50 Ohm impedance. Pasternack BMA plug connector uses shield/contact solder as an attachment method. Our plug BMA right angle pcb connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack right angle BMA plug pcb slide-on connector has a PTFE dielectric type. The Pasternack BMA pcb connector has a brass body with gold plating. Our PE45333 BMAright angle connector uses brass contact. This BMA plug right angle pcb slide-on RF connector is REACH compliant. This Pasternack right angle plug BMA connector will ship the same day as purchased. Our BMA right angle plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BMA connector cable assemblies that will ship the same day as well. |
| 0 | ||
| PE3C10453-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.92mm Female to 2.92mm Female Cable 36 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm female to 2.92mm female cable 36 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to 2.92mm female cable 36 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10453-36 can also be known as a 2.92mm jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our 2.92mm female to 2.92mm female cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm jack cable assembly PE3C10453-36 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 2.92mm jack to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE45330 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: BMA, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Solder/Solder, Mount Method: 2 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 12.4 GHz, Interface Type 1: RG405, Interface Type 2: PE-SR405AL, Interface Type 3: PE-SR405FL, Interface Type 4: PE-SR405FLJ. BMA Jack Right Angle Slide-On Connector Solder Attachment 2 Hole Flange Mount for RG405, PE-SR405AL, PE-SR405FL, PE-SR405FLJ, Gold Body. PE45330 BMA jack right angle 2 hole flange coaxial slide-on connector has an interface type of RG405, PE-SR405AL, PE-SR405FL, PE-SR405FLJ and a 50 Ohm impedance. Pasternack BMA jack 2 hole flange connector uses shield/contact solder/solder as an attachment method. Our jack BMA right angle coaxial connector provides a minimum frequency of DC and a maximum frequency of 12.4 GHz. The Pasternack right angle BMA jack 2 hole flange coaxial slide-on connector has a PTFE dielectric type and a VSWR of 1.46. The Pasternack BMA coaxial connector has a stainless steel body with gold plating. Our PE45330 BMAright angle connector uses beryllium copper contact and a gold plating material. This BMA jack right angle 2 hole flange coaxial slide-on RF connector is REACH compliant. This Pasternack right angle jack BMA 2 hole flange connector will ship the same day as purchased. Our 2 hole flange BMA right angle jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BMA connector cable assemblies that will ship the same day as well. |
| 0 | ||
 TE Connectivity | 1445336-1 | TE Connectivity | LOOSE PC CONTACT TIN PLATED Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 26 – 22 AWG Operating Voltage: 250 VAC Tin (Sn) Socket Pre-Tin 26 – 22 AWG | TE Connectivity RoHS : Compliant |
| 33,045 | |
| 84533-6 | TE Connectivity | 1.25MM FFC POST PLATED H 6P Centerline (Pitch): .049 in Centerline (Pitch): 1.25 mm Insertion Force Type: Non ZIF PCB Mount Orientation: Right Angle Contact Mating Location: Top 0.049" 1.25 mm Non ZIF Right Angle | .049" | TE Connectivity RoHS : Compliant |
| 18,585 | ||
| 1-84533-6 | TE Connectivity | 1.25MM FFC POST PLATED H 16P Centerline (Pitch): .049 in Centerline (Pitch): 1.25 mm Insertion Force Type: Non ZIF PCB Mount Orientation: Right Angle Contact Mating Location: Top 0.049" 1.25 mm Non ZIF Right Angle | .049" | TE Connectivity RoHS : Compliant |
| 17,120 | ||
| 2-84533-0 | TE Connectivity | 1.25MM FFC POST PLATED H 20P Centerline (Pitch): .049 in Centerline (Pitch): 1.25 mm Insertion Force Type: Non ZIF PCB Mount Orientation: Right Angle Contact Mating Location: Top 0.049" 1.25 mm Non ZIF Right Angle | .049" | TE Connectivity RoHS : Compliant |
| 16,449 | ||
| 84533-8 | TE Connectivity | 1.25MM FFC POST PLATED H 8P Centerline (Pitch): .049 in Centerline (Pitch): 1.25 mm Insertion Force Type: Non ZIF PCB Mount Orientation: Right Angle Contact Mating Location: Top 0.049" 1.25 mm Non ZIF Right Angle | .049" | TE Connectivity RoHS : Compliant |
| 12,226 | ||
| 1445336-2 | TE Connectivity | LOOSE PC CONTACT 15 AU PLATED Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Flash Wire Size: 26 – 22 AWG Operating Voltage: 250 VAC Gold (Au) Socket Gold Flash 26 – 22 AWG | TE Connectivity RoHS : Compliant |
| 6,885 | ||
| 640453-3 | TE Connectivity | 03P MTA100 HDR ASSY SQ R/A PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 3 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 5,570 | ||
| 84533-5 | TE Connectivity | 1.25MM FFC POST PLATED H 5P Centerline (Pitch): .049 in Centerline (Pitch): 1.25 mm Insertion Force Type: Non ZIF PCB Mount Orientation: Right Angle Contact Mating Location: Top 0.049" 1.25 mm Non ZIF Right Angle | .049" | TE Connectivity RoHS : Compliant |
| 5,419 | ||
| 1-84533-0 | TE Connectivity | 1.25MM FFC POST PLATED H 10P Centerline (Pitch): .049 in Centerline (Pitch): 1.25 mm Insertion Force Type: Non ZIF PCB Mount Orientation: Right Angle Contact Mating Location: Top 0.049" 1.25 mm Non ZIF Right Angle | .049" | TE Connectivity RoHS : Compliant |
| 3,971 | ||
| 324533 | TE Connectivity | TERMINAL,PIDG R 16-14 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.04 – 2.62 mm² Wire Size: 2050 – 5180 CMA Stud Size: #10 Closed Ring Tongue Terminal 16 – 14 AWG 1.04 – 2.62 mm² 2050 – 5180 CMA | Pidg Spade Tongue Terminal | TE Connectivity RoHS : Compliant |
| 3,138 | ||
| 2-324533-2 | TE Connectivity | TERMINAL,PIDG R 16-14 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.04 – 2.62 mm² Wire Size: 2050 – 5180 CMA Stud Size: #10 Closed Ring Tongue Terminal 16 – 14 AWG 1.04 – 2.62 mm² 2050 – 5180 CMA | Pidg Spade Tongue Terminal | TE Connectivity RoHS : Compliant |
| 1,450 | ||
| 164533-4 | TE Connectivity | 25P.HDP20 REC.ASSY. Number of Positions: 25 Connector & Housing Type: Receptacle Connector System: Cable-to-Panel Connector Mounting Type: Panel Mount Connector Shell Size: 3 Ampseal Header | 25 Receptacle Cable-to-Panel Panel Mount | TE Connectivity RoHS : Compliant |
| 839 | ||
 Venkel Ltd. | CRG1206-T-4533FT | VENKEL LTD | RoHS 10/10 Green CR;1206;1/4W;453K ;�1% RoHS : Compliant | 0 | ||
| UPTF2010-2W-N-4533UT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�10PPM;453K ;�0.01% RoHS : Compliant | 0 | |||
| UPTF2512-2W-N-4533BT | VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�10PPM;453K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-4533CT | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;453K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-4533FT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;453K ;�1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-K-4533CT | VENKEL LTD | Thin Film CR;0805;1/10W;�100PPM;453K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-10W-K-4533DT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�100PPM;453K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-4W-K-4533BT | VENKEL LTD | Thin Film CR;1206;1/4W;�100PPM;453K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-4533DT | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;453K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-4533BT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;453K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-4533CT | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;453K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR2010-4W-C-4533FT | VENKEL LTD | Thin Film CR;2010;1/4W;�50PPM;453K ;�1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-E-4533BT | VENKEL LTD | Thin Film CR;2010;1/4W;�25PPM;453K ;�0.1% RoHS : Compliant | 0 | |||
| PWCR0805-BK-4533DT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�100PPM;453K;�0.5% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-4533UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;453K ;�0.01% RoHS : Compliant | 0 | |||
 Vyrian | Y1453321R000V9L | Vishay Precision Group Inc | Fixed Resistor, Metal Foil, 0.6W, 321ohm, 300V, 0.005% +/-Tol, 0.2ppm/Cel, Through Hole Mount RoHS : Compliant | 14,575 | ||
| MAX4533EWP+ | Analog Devices Inc | SPDT, 4 Func, 1 Channel, PDSO20 RoHS : Compliant | 11,843 | |||
ADR4533ARZ | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 3.3V, PDSO8 RoHS : Compliant | 10,937 | |||
| MAX4533EAP+T | Analog Devices Inc | SPDT, 4 Func, 1 Channel, PDSO20 RoHS : Compliant | 10,666 | |||
| ADR4533BRZ | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 3.3V, PDSO8 RoHS : Compliant | 9,663 | |||
| 1754533 | Phoenix Contact | Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,536 | |||
BQ294533DRVR | Texas Instruments | Power Supply Support Circuit, Adjustable, 3 Channel, PDSO6 RoHS : Compliant | 8,152 | |||
| MAX4533CAP+ | Analog Devices Inc | SPDT, 4 Func, 1 Channel, PDSO20 RoHS : Compliant | 8,019 | |||
| MAX4533CPP+ | Analog Devices Inc | SPDT, 4 Func, 1 Channel, PDIP20 RoHS : Compliant | 7,488 | |||
| PPS74533PCQWDRVRQ1 | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.16V Dropout, PDSO6 | 6,945 | |||
| CT453330 | Micron Technology, Inc | 6,645 | ||||
| MAX4533EAP-T | Maxim Integrated Products | SPDT, 4 Func, 1 Channel, PDSO20 RoHS : Not Compliant | 6,461 | |||
TPS7A4533KTTT | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.45V Dropout, BIPolar, PSSO5 | 5,992 | |||
PPS74533PQWDRBRQ1 | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.16V Dropout, PDSO8 RoHS : Not Compliant | 5,757 | |||
| CT453326 | Micron Technology, Inc | 3,092 | ||||
 Win Source Electronics | MIC5245-3.3BM5 | Microchip Technology Inc | IC REG LDO 3.3V 0.15A SOT23-5 |
| 54,925 | |
| STIEC45-33AS | STMicroelectronics | TVS DIODE 33VWM 59VC DO214AB RoHS : Compliant |
| 18,888 | ||
TPS7A4533DCQR | Texas Instruments | IC REG LDO 3.3V 1.5A SOT223-6 RoHS : Compliant |
| 11,450 | ||
| MIC5245-3.3BM5 TR | Microchip Technology Inc | IC REG LDO 3.3V 0.15A SOT23-5 |
| 8,200 | ||
| TPS7A4533KT | Texas Instruments | 1.5A 20V Low-Dropout Regulator (LDO) Fixed 3.3V DDPAK/TO-263-5 |
| 6,836 | ||
| TPS7A4533KTT | Texas Instruments |
| 6,360 | |||
| SRN6045-330M | Bourns Inc | FIXED IND 33UH 1.4A 188 MOHM SMD RoHS : Compliant |
| 6,000 | ||
| CY8C24533-24PVXI | Cypress Semiconductor | IC MCU 8BIT 8KB FLASH 28SSOP / MCU 8-bit M8C CISC 8KB Flash 3.3V/5V 28-Pin SSOP RoHS : Compliant |
| 5,750 | ||
| CY8C24533-24PVXIT | Cypress Semiconductor | IC MCU 8BIT 8KB FLASH 28SSOP |
| 5,410 | ||
| 04533.15MR | Littelfuse Inc | FUSE BOARD MNT 3.15A 125VAC/VDC RoHS : Compliant |
| 4,943 | ||
| ADR4533BR | Analog Devices Inc | 3.3V Ultra-Low Noise, Low Power Voltage Reference 8-SOIC |
| 4,000 | ||
| ADR4533BRZ | Analog Devices Inc | IC VREF SERIES 3.3V 8SOIC RoHS : Compliant |
| 3,000 | ||
| ADR4533BRZ-R7 | Analog Devices Inc | IC VREF SERIES 0.02% 8SOIC RoHS : Compliant |
| 2,740 | ||
| ADR4533AR | Analog Devices Inc | 3.3V Ultra-Low Noise, Low Power Voltage Reference 8-SOIC |
| 2,000 | ||
| ADR4533ARZ | Analog Devices Inc | Ultralow Noise, High Accuracy RoHS : Compliant |
| 1,840 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand