 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
480ACNDNNFZCWC 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 Pasternack Enterprises US | PE3480LF-180 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC Twinax, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 78 Ohm, Connector Series 2: BNC Twinax, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 78 Ohm, RF Cable Part Number: RG108A/U, RF Cable Type: RG108, RF Cable Impedance: 78 Ohm, Length: 180 inches. BNC Twinax Plug to BNC Twinax Plug Cable 180 Inch Length Using 78 Ohm RG108 Coax, RoHS., Radio frequency assembly BNC twinax plug to BNC twinax plug cable 180 inch length using 78 Ohm RG108 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC twinax plug to BNC twinax plug cable 180 inch length using 78 Ohm RG108 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC twinax to BNC twinax cable assembly orders will ship same day as well. Pasternack RF twinax cable assembly is built with BNC twinax cable connection on one end and BNC twinax cable connection on the other. Our BNC twinax to BNC twinax cable assemblies have a plug gender on end 1 and plug on end 2. This BNC twinax to BNC twinax cable is a plug to plug twinax assembly, PE3480LF-180, can also be known as a BNC twinax male to BNC twinax male cable assembly and will be shipped same-day as it is purchased. BNC twinax male to BNC twinax male cable assembly PE3480LF-180 is built with RG108 which is a flexible twinax type. The Pasternack flexible BNC Twinax cable assembly is manufactured with BNC twinax to BNC twinax cable connectors, has a 78 Ohm impedance and is single shielded. RF specs on this BNC twinax plug to BNC twinax plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC twinax male to BNC twinax male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC twinax to BNC twinax cable assembly for quick shipment worldwide. Variations of BNC twinax cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC twinax plug to BNC twinax plug cable 180 inch length using 78 Ohm RG108 coax, RoHS. |
| 1,097 | |
| PE3480-900 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC Twinax, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 78 Ohm, Connector Series 2: BNC Twinax, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 78 Ohm, RF Cable Part Number: RG108A/U, RF Cable Type: RG108, RF Cable Impedance: 78 Ohm, Length: 900 inches. BNC Twinax Plug to BNC Twinax Plug Cable 900 Inch Length Using 78 Ohm RG108 Coax., Radio frequency assembly BNC twinax plug to BNC twinax plug cable 900 inch length using 78 Ohm RG108 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC twinax plug to BNC twinax plug cable 900 inch length using 78 Ohm RG108 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC twinax to BNC twinax cable assembly orders will ship same day as well. Pasternack RF twinax cable assembly is built with BNC twinax cable connection on one end and BNC twinax cable connection on the other. Our BNC twinax to BNC twinax cable assemblies have a plug gender on end 1 and plug on end 2. This BNC twinax to BNC twinax cable is a plug to plug twinax assembly, PE3480-900, can also be known as a BNC twinax male to BNC twinax male cable assembly and will be shipped same-day as it is purchased. BNC twinax male to BNC twinax male cable assembly PE3480-900 is built with RG108 which is a flexible twinax type. The Pasternack flexible BNC Twinax cable assembly is manufactured with BNC twinax to BNC twinax cable connectors, has a 78 Ohm impedance and is single shielded. RF specs on this BNC twinax plug to BNC twinax plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC twinax male to BNC twinax male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC twinax to BNC twinax cable assembly for quick shipment worldwide. Variations of BNC twinax cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC twinax plug to BNC twinax plug cable 900 inch length using 78 Ohm RG108 coax. |
| 426 | ||
| PE3C4807-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 12 inches. Snap-On MMBX Plug Right Angle to SMA Female Bulkhead Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly snap-on MMBX plug right angle to SMA female bulkhead cable 12 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug right angle to SMA female bulkhead cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMBX cable connection on one end and SMA bulkhead cable connection on the other. Our right angle MMBX to SMA cable assemblies have a plug gender on end 1 and female on end 2. This MMBX to SMA cable is a plug to female coax assembly, PE3C4807-12, can also be known as a right angle MMBX male to SMA jack cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA jack cable assembly PE3C4807-12 is built with RG178 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MMBX right angle plug to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4807-12 can also be used in the other direction and will be SMA female bulkhead to right angle MMBX plug cable assembly if the opposite connectivity is required. MMBX right angle male to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug right angle to SMA female bulkhead cable 12 inch length using RG178 coax. |
| 291 | ||
| PE48085 | Pasternack Enterprises |
| 25 | |||
| PE3W04805-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male Right Angle to TNC Male Right Angle Low Loss Cable 300 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male right angle to TNC male right angle low loss cable 300 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to TNC male right angle low loss cable 300 inch length using LMR-400-UF coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle N type to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04805-300 can also be known as a low loss right angle N type plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W04805-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04805-300 can also be used in the other direction and will be right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male right angle low loss cable 300 inch length using LMR-400-UF coax. |
| 17 | ||
| PE3W04805/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male Right Angle to TNC Male Right Angle Low Loss Cable 12 Inch Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly N male right angle to TNC male right angle low loss cable 12 inch length using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to TNC male right angle low loss cable 12 inch length using LMR-400-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle N type to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04805/HS-12 can also be known as a low loss right angle type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3W04805/HS-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04805/HS-12 can also be used in the other direction and will be right angle TNC male to right angle N type male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male right angle low loss cable 12 inch length using LMR-400-UF coax with heatshrink. |
| 17 | ||
| PE7480-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 2 dB, Input Power, Max (CW): 50 Watts, Body Material: Black Anodized Aluminum Heatsink, Connector-In Series: N, Connector-In Gender: Female, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 75 deg C, Min Operating Temperature: -40 deg C. Low PIM 10dB Fixed Attenuator N-type female to N-type female Black Anodized Aluminum Body to 50 Watts 0.6 GHz to 6 GHz. The PE7480-10 is a low PIM fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This low PIM threaded RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Pasternack's PE7480-10 fixed attenuator is available with a typical attenuation accuracy of 2 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. Our low PIM radio frequency attenuator with N-type connectors is constructed with black anodized aluminum heatsink body material. This passive connectorized radio frequency attenuator has -160 dBc typical passive intermodulation. The connectorized directional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This N-type attenuator has a female gender on side 1 and a N-type female connector on side 2. Our low PIM RF attenuator is rated for a maximum attenuation value of 10 dB. The Pasternack PE7480-10 attenuator is rated for frequency range between 600 MHz to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The attenuator has a black anodized aluminum heatsink N-type connector with gold-plated beryllium copper contact. Our fixed RF attenuator PE7480-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE3W04801 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male Bulkhead to SMP Female Right Angle Cable Using PE-SR405AL Coax. PE3W04801 is a SMP male bulkhead to SMP female right angle cable using PE-SR405AL coax. This Pasternack SMP male bulkhead to SMP female right angle cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. SMP to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMP bulkhead to female SMP right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04801 SMP male bulkhead to SMP female right angle cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W04807LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. N Male to Reverse Polarity SMA Male Cable Using LMR-195-FR Coax, LF Solder. PE3W04807LF is a N male to reverse polarity SMA male cable using LMR-195-FR coax. This Pasternack N male to reverse polarity SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04807LF N male to SMA reverse polarity male cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W24809 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. SMA Female to 7/16 DIN Male Cable Using RG393 Coax. PE3W24809 is a SMA female to 7/16 DIN male cable using RG393 coax. This Pasternack SMA female to 7/16 DIN male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our female SMA to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24809 SMA female to 7/16 DIN male cable assembly is constructed with RG393 coax. | 0 | |||
| PE48034 | Pasternack Enterprises |
| 0 | |||
| PE3C4803 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Mini SMP Female to SMA Female Cable Using PE-SR405FL Coax., Radio frequency assembly mini SMP female to SMA female cable using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Mini SMP female to SMA female cable using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMP cable connection on one end and SMA cable connection on the other. Our mini SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. This mini SMP to SMA cable is a female to female coax assembly, PE3C4803, can also be known as a mini SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA jack cable assembly PE3C4803 is built with PE-SR405FL which is a formable coax type. The Pasternack formable Mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency mini SMP female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4803 can also be used in the other direction and will be SMA female to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female to SMA female cable using PE-SR405FL coax. | 0 | |||
| PE3W04807 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Male Cable Using LMR-195-FR Coax. PE3W04807 is a reverse polarity SMA male to N male cable using LMR-195-FR coax. This Pasternack reverse polarity SMA male to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04807 SMA reverse polarity male to N male cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03480/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Cable Using Tinned RG402 Coax with HeatShrink. PE3W03480/HS is a SMA male right angle to SMA male cable using RG402 Tinned coax. This Pasternack SMA male right angle to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W03480/HS SMA male right angle to SMA male cable assembly is constructed with RG402 Tinned coax. | 0 | |||
| PE3W04803 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMP Female Right Angle Cable Using RG405 Coax. PE3W04803 is a SMP female right angle to SMP female right angle cable using RG405 coax. This Pasternack SMP female right angle to SMP female right angle cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. SMP right angle to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to female SMP right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04803 SMP female right angle to SMP female right angle cable assembly is constructed with RG405 coax. | 0 | |||
 Teledyne HiRel | 5962-8764805YA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 8, 90 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
| 5962-8764805ZA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 8, 90 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-9214801QSA | Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, WITH INVERTING 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-8764801YA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 8, 150 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-9314801QRA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-8764803YA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8764802XA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 8, 200 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8764801ZA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 8, 150 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-9314801QSA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-8764804YA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 8, 120 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8764803ZA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8764802YA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 8, 200 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8764802ZA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 8, 200 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8764806ZA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 8, 70 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8764804ZA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 8, 120 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | MELFM0204-TC-3480FT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�50PPM;348R;�1% RoHS : Not Compliant | 0 | ||
| MELFM0204-TE-3480BT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�25PPM;348R;�0.1% RoHS : Not Compliant | 0 | |||
| MELFM0204-ZC-3480DT | VENKEL LTD | MELF Molded Thin Film CR;0204;2/5W;�50PPM;348R;�0.5% RoHS : Not Compliant | 0 | |||
| UPTF0603-16W-N-4480BT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;448R;�0.1% RoHS : Compliant | 0 | |||
| UPTF0805-10W-N-4480UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�10PPM;448R;�0.01% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-4480CT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;448R;�0.25% RoHS : Compliant | 0 | |||
| HPCR1210-W-3480FT | VENKEL LTD | High Power CR;1210;3/4W;348R;�1% RoHS : Compliant | 0 | |||
| HPTF0603-QE-3480AT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�25PPM;348R;�0.05% RoHS : Compliant | 0 | |||
| HPTF0805-TE-3480BT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�25PPM;348R;�0.1% RoHS : Compliant | 0 | |||
| HPTF1206-TP-3480UT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�5PPM;348R;�0.01% RoHS : Compliant | 0 | |||
| HPTF1210-UE-3480FT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�25PPM;348R;�1% RoHS : Compliant | 0 | |||
| PWCR0603-UK-3480FT | VENKEL LTD | Pulse Withstanding CR;0603;1/3W;�100PPM;348R;�1% RoHS : Compliant | 0 | |||
| PWCR1210-XK-3480DT | VENKEL LTD | Pulse Withstanding CR;1210;1W;�100PPM;348R;�0.5% RoHS : Compliant | 0 | |||
| MELFM0207-VE-3480FT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�25PPM;348R;�1% RoHS : Not Compliant | 0 | |||
| UPTF0402-16W-N-4480CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;448R;�0.25% RoHS : Compliant | 0 | |||
 Waytek, Inc. | 12048074 | Aptiv PLC | Metri-Pack 150 Series Female 18-16GA 12048074 Terminal Reel 3000/Reel Tang RoHS : Compliant |
| 84,000 | |
| 35232480 | Aptiv PLC | Metri-Pack 480 Cavity Plug 8.5 MM DELPHI PN 12066082 |
| 52,699 | ||
| 12048074-L | Aptiv PLC | The Aptiv 12048074 is a Metri-Pack 150 Series sealed female terminal designed for reliable automotive electrical connections in harsh environments. Compatible with 1816 Ga. wire (0.51.0 mm), it features a crimp termination with dual crimp zones for both the conductor and seal, ensuring secure electrical contact and environmental protection. Constructed from tin-plated copper alloy, it provides excellent conductivity and corrosion resistance, with a current rating up to ~14A. Designed for use with Metri-Pack 150 connector housings, it includes a locking lance for secure terminal retention and operates reliably from -40C to +125C, making it ideal for automotive, marine, and industrial applications. |
| 44,605 | ||
| 33472-4801 | Molex | The Molex 33472-4801 is an MX150 1.5 mm sealed female connector housing designed for compact, high-reliability wire-to-wire connections in automotive and harsh environments. It features an 8-circuit (8-pin), dual-row (2x4) configuration with keying option A, ensuring proper mating and preventing misconnection. Constructed from durable thermoplastic, it provides environmental sealing when used with MX150 terminals and seals, protecting against moisture, dirt, and vibration. With a 3.5 mm pitch and -40C to +125C operating range, it is ideal for automotive, marine, and industrial applications. RoHS : Compliant |
| 2,703 | ||
| T250R0X2 111-24801 | HellermannTyton | HellermannTyton T250R0X2 heavy-duty cable tie is a 20" long high-strength tie built for securing large wire bundles, hoses, and tubing. Its one-piece self-locking design supports fast installation and dependable hold in demanding electrical, industrial, and harness-routing applications. |
| 2,150 | ||
| 57480 OR 611-048 | Ideal Clamp Products Inc | Standard Stainless Steel Band Hose Clamp #48 Band 1/2" 1-1/2" TO 3-1/2" |
| 780 | ||
| 1648-009-070-15 | MP | 70A Circuit Breaker UL1500 50V Ignition Proof Panel Mount UL 1077 7/16" 28 DIECAST MOUNT |
| 548 | ||
| 1648-009-050-15 | MP | 50A Circuit Breaker UL1500 50V Ignition Proof Panel Mount UL 1077 7/16" 28 DIECAST MOUNT |
| 101 | ||
| M-448-02 | Cole Hersee | Terminal Block Common BusBar 20-Gang Screw TypeTin-Plated |
| 34 | ||
| 48090 | Cole Hersee | 90A Battery Isolator 3 Studs 1/4" |
| 26 | ||
| 5990-480V | Hillsdale Terminal & Tool Inc | The Hillsdale Termimal 22258 Vinyl Terminal Kit is a 480-piece assortment of solderless, vinyl-insulated terminals designed for versatile wire termination and repair. It includes a mix of ring, spade, and butt connectors, and quick-disconnect terminals covering 2210 Ga. wire sizes (red, blue, yellow). Packaged in an organized case, it provides durable, corrosion-resistant connections for automotive, marine, and industrial applications. |
| 3 | ||
| 1648-009-060-15 | MP | 60A Circuit Breaker UL1500 50V Ignition Proof Panel Mount UL 1077 7/16" 28 DIECAST MOUNT |
| 0 | ||
| 1648-009-040-15 | MP | 40A Circuit Breaker UL1500 50V Ignition Proof Panel Mount UL 1077 7/16" 28 DIECAST MOUNT |
| 0 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand