| データシートサーチシステム |
|
4815L-S08-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() TME | AM6TW-4815SH30-NZ![]() | Aimtec | Converter: DC/DC; 6W; Uin: 18÷75VDC; Uout: 15VDC; Iout: 400mA; DIP24 RoHS : Compliant |
| 2 | |
| 4815 | Keystone Electronics Corp | Screwed spacer sleeve; hexagonal; polyamide; UNC6-32; UNC6-32 |
| 0 | ||
| 5DAW_4815S2 | GAPTEC Electronic GmbH & Co. KG | Converter: DC/DC; 5W; Uin: 36÷75VDC; Uout: 15VDC; Iout: 340mA; DIP24 |
| 0 | ||
| 7000-40541-3481500 | Murrelektronik GmbH | Cable: for sensors; PIN: 5; M12 male straight,M12 female angled |
| 0 | ||
| AM10BRW-4815SZ | Aimtec | Converter: DC/DC; 10W; Uin: 18÷75VDC; Uout: 15VDC; DIP; THT; OUT: 1 RoHS : Compliant |
| 0 | ||
AM15C-4815SZ![]() | Aimtec | Converter: DC/DC; 15W; Uin: 36÷75VDC; Uout: 15VDC; THT; AM15C-Z RoHS : Compliant |
| 0 | ||
| AM15CW-4815SLPZ | Aimtec | Converter: DC/DC; 15W; Uin: 18÷75VDC; Uout: 15VDC; Iout: 1A; DIP6; THT RoHS : Compliant |
| 0 | ||
AM15EW-4815DZ![]() | Aimtec | Converter: DC/DC; 15W; Uin: 18÷72VDC; Uout: 15VDC; Uout2: -15VDC RoHS : Compliant |
| 0 | ||
AM3TW-4815D-RZ![]() | Aimtec | Converter: DC/DC; 3W; Uin: 18÷72VDC; Uout: 15VDC; Uout2: -15VDC; THT RoHS : Compliant |
| 0 | ||
AM5T-4815DZ![]() | Aimtec | Converter: DC/DC; 5W; Uin: 36÷72VDC; Uout: 15VDC; Uout2: -15VDC; THT RoHS : Compliant |
| 0 | ||
AM6G-4815SZ![]() | Aimtec | Converter: DC/DC; 6W; Uin: 36÷75VDC; Uout: 15VDC; SIP8; THT; AM6G-Z RoHS : Compliant |
| 0 | ||
AM6T-4815SZ![]() | Aimtec | Converter: DC/DC; 6W; Uin: 36÷72VDC; Uout: 15VDC; Iout: 400mA; DIP24 RoHS : Compliant |
| 0 | ||
AM6TI-4815DZ![]() | Aimtec | Converter: DC/DC; 6W; Uin: 36÷75VDC; Uout: 15VDC; Uout2: -15VDC; THT RoHS : Compliant |
| 0 | ||
AM6TIW-4815D-RZ![]() | Aimtec | Converter: DC/DC; 6W; Uin: 18÷75VDC; Uout: 15VDC; Uout2: -15VDC; THT RoHS : Compliant |
| 0 | ||
AM6TW-4815S-NZ![]() | Aimtec | Converter: DC/DC; 6W; Uin: 18÷75VDC; Uout: 15VDC; Iout: 400mA; DIP24 RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | BU4815G-TR![]() | ROHM Semiconductor | RoHS : Compliant |
| 50 | |
![]() ComSIT USA | THL304815WI | Traco Power | AVAILABLE EU | 24 | ||
![]() ComSIT USA | ATMEGA4815AT1 | Atmel Corporation | 8-BIT MICROCONTROLLER WITH 8K BYTES IN-SYSTEM PROGRAMMABLE FLASH RISC Microcontroller, 8-Bit, FLASH, AVR RISC CPU, 16MHz, CMOS, PQFP32 RoHS : Compliant | 1,145 | ||
| I4815421122101 | Vikay (Displays) | Electronic Component RoHS : Not Compliant | 399 | |||
| SC16C550BIB48151 | NXP Semiconductors | 5 V, 3.3 V AND 2.5 V UART WITH 16-BYTE FIFOS Serial I/O Controller, 1 Channel(s), 0.375MBps, CMOS, PQFP48 RoHS : Compliant | 234 | |||
| 7481521 | TE Connectivity | AMPLIMITE TRANSITION CONNECTOR (RS-232 TO MODULAR JACK) Rectangular Connector Adapter, 25 Contacts(Side1), 6 Contacts(Side2), Panel Mount, Female-Female RoHS : Not Compliant | 86 | |||
| AM27C2048150PC | AMD | 2 MEGABIT (128 K X 16-BIT) CMOS EPROM OTP ROM, 128KX16, 150ns, CMOS, PDIP40 RoHS : Not Compliant | 11 | |||
![]() Powell Electronics | 745481-5 | TE Connectivity | Connectors |
| 29,040 | |
| TW-05-12-L-D-648-150 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 166 | ||
| 6104-248-1502 | TE Connectivity | DEUTSCH CONNECTOR 6104-248-1502 |
| 163 | ||
| TSW-148-15-T-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 160 | ||
| 5617648-15 | TE Connectivity | D-150-1016CS821 |
| 96 | ||
| SST-48-15/226 | TE Connectivity | Connectors RoHS : Compliant |
| 83 | ||
| XFFR-48-15/97 | TE Connectivity | Connectors RoHS : Compliant |
| 66 | ||
| ZW-48-15-S-S-340-200 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 56 | ||
| MTMM-148-15-T-Q-315 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 46 | ||
| MTMM-148-15-T-Q-314 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 46 | ||
| DW-48-15-L-D-295 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 44 | ||
| 1106481-5 | TE Connectivity | Connectors RoHS : Compliant |
| 33 | ||
| 7-1437481-5 | TE Connectivity | TE COMPONENT (REF 7-1437481-5) RoHS : Not Compliant |
| 20 | ||
| 10-527248-15R | Amphenol Corporation | Connector |
| 17 | ||
| 10-527248-15T | Amphenol Corporation | Connector |
| 5 | ||
![]() Richardson RFPD | REC10-4815S/H2/M | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 0.667A 10W 5-Pin Tube RoHS : Compliant |
| 0 | |
| REC3-4815DRWZ/H6/C/SMD-R | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 15V/-15V 0.1A/-0.1A 3W Me RoHS : Compliant |
| 0 | ||
| REC3-4815SRW/H4/A/X2 | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 0.2A 3W 7-Pin DIP Mod RoHS : Compliant |
| 0 | ||
REC3.5-4815SRW/R8/A/X1![]() | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 0.233A 3.5W 6-Pin DIP RoHS : Compliant |
| 0 | ||
| REC5-4815DRW/H6/A | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 15V/-15V 0.17A/-0.17A 5W RoHS : Compliant |
| 0 | ||
| REC5-4815DRWZ/H4/C/M | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 15V/-15V 0.17A/-0.17A 5W RoHS : Compliant |
| 0 | ||
| REC5-4815SRW/H6/A/X2 | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 0.34A 5W 7-Pin DIP Mo RoHS : Compliant |
| 0 | ||
| REC6-4815SRW/R8/A/CTRL/X1 | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 0.4A 6W 7-Pin DIP Tub RoHS : Compliant |
| 0 | ||
| REC6-4815SRW/R8/C/X1 | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 0.4A 6W 9-Pin DIP Tub RoHS : Compliant |
| 0 | ||
| REM5E-4815D/R8/A/CTRL | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 15V/-15V 0.166A/-0.166A 5 RoHS : Compliant |
| 0 | ||
| RPM15-4815SFW | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 15W 7-Pin Box RoHS : Compliant |
| 0 | ||
| RPMD15-4815SFW | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 15W 8-Pin Box RoHS : Compliant |
| 0 | ||
| RS3-4815D/H2 | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 15V/-15V 0.1A/-0.1A 3W Me RoHS : Compliant |
| 0 | ||
RW2-4815D/H2/B![]() | RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 15V/-15V 0.067A/0.067A 2W RoHS : Compliant |
| 0 | ||
| RP120Q-4815SRW/P | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 15V 8A 120W 8-Pin Quarter RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 48153-0210 | Molex | INSTOCK RoHS : Compliant | 4,730 | ||
| 48153-0210 | INSTOCK | 4,600 | ||||
| 2414815 | Thomson Components-Mostek Corp | INSTOCK | 4,000 | |||
| 53048-1510 | INSTOCK | 2,039 | ||||
| 48151-0210 | Molex | INSTOCK RoHS : Compliant | 1,259 | |||
| 48151-0210 | INSTOCK | 1,250 | ||||
| MSS1048-154KLC | Coilcraft Inc | INSTOCK RoHS : Compliant | 673 | |||
| 48150-0001 | Molex | INSTOCK | 300 | |||
| 1D49481-501 | INSTOCK | 14 | ||||
![]() Avnet Abacus | SRU1048-151Y | Bourns Inc | - Tape and Reel (Alt: SRU1048-151Y) RoHS : Compliant | 3,600 | ||
| IM4815SA | XP Power | DCDC 2W reg single output 41 Input SIP (Alt: IM4815SA) RoHS : Compliant | 0 | |||
| PH02S4815A | Eltek | Isolated Through Hole DCDC Converter ITE Medical 41 2 W 1 Output Fixed 15 V 134 mA (Alt: PH02S4815A) RoHS : Compliant | 0 | |||
| DK03S4815A | Eltek | Isolated Through Hole DCDC Converter ITE Medical 21 3 W 1 Output Fixed 15 V 200 mA (Alt: DK03S4815A) RoHS : Compliant | 0 | |||
| PJ03S4815A | Eltek | Module DCDC SingleOUT 15V 02A 3W 8Pin SIP (Alt: PJ03S4815A) RoHS : Compliant | 0 | |||
AM2D-4815DZ![]() | Aimtec | (Alt: AM2D-4815DZ) RoHS : Compliant | 0 | |||
AM40U-4815DIZ![]() | Aimtec | Module DCDC DualOUT 15V15V 115A115A 40W 7Pin DIP Tube (Alt: AM40U-4815DIZ) RoHS : Compliant | 0 | |||
| AM10CW-4815DEZ | Aimtec | AM10CWEZ DCDC Converter (Alt: AM10CW-4815DEZ) RoHS : Compliant | 0 | |||
AM10TW-4815SIZ![]() | Aimtec | Module DCDC 1OUT 15V 066A 10W 24Pin DIP Tube (Alt: AM10TW-4815SIZ) RoHS : Compliant | 0 | |||
AM4T-4815DH35Z![]() | Aimtec | Isolated Through Hole DCDC Converter Household ITE 21 4 W 2 Outputs Fixed 15 V 133 mA (Alt: AM4T-4815DH35Z) RoHS : Compliant | 0 | |||
AM6TW-4815D-RZ![]() | Aimtec | Isolated Through Hole DCDC Converter Household ITE 41 6 W 2 Outputs Fixed 15 V 200 mA (Alt: AM6TW-4815D-RZ) RoHS : Compliant | 0 | |||
| AM50E-4815SZ-K | Aimtec | (Alt: AM50E-4815SZ-K) RoHS : Compliant | 0 | |||
| AM10TW-4815DLPZ | Aimtec | (Alt: AM10TW-4815DLPZ) RoHS : Compliant | 0 | |||
AM4TW-4815D-RVZ![]() | Aimtec | Module DCDC DualOUT 15V15V 0133A0133A 4W 8Pin DIP Tube (Alt: AM4TW-4815D-RVZ) RoHS : Compliant | 0 | |||
| BPPM00090748152X00 | Pulse Electronics Corporation | - Tape and Reel (Alt: BPPM00090748152X00) RoHS : Compliant | 0 | |||
![]() Avnet Asia | PKU4815CPI | Flex Ltd | (Alt: PKU4815CPI) RoHS : Compliant | 0 | ||
| 148152030035868+ | KYOCERA Corporation | (Alt: 148152030035868+) RoHS : Compliant | 0 | |||
| GBCC248-1538A650C1AH | Greenconn Corp | Plug male 1.0mm 30-pin (1-6 14,16 25-30) SMD (Alt: GBCC248-1538A650C1AH) RoHS : Compliant | 0 | |||
| PA4548.152NLT | Pulse Electronics Corporation | (Alt: PA4548.152NLT) RoHS : Compliant | 0 | |||
| SLG4CE48159V | Renesas Electronics Corporation | (Alt: SLG4CE48159V) RoHS : Compliant | 0 | |||
| AM6CW-4815DEZ | Aimtec | Isolated Through Hole DC/DC Converter, ITE & Industrial, 4:1, 6 W, 2 Outputs, Fixed, 15 V/-15 V (Alt: AM6CW-4815DEZ) RoHS : Compliant | 0 | |||
| 248152030035868+ | KYOCERA Corporation | (Alt: 248152030035868+) RoHS : Compliant | 0 | |||
![]() Avnet Silica | LPC2101FBD48,151![]() | NXP Semiconductors | MCU 16bit32bit LPC2000 ARM7TDMIS RISC 8KB Flash 18V33V 48Pin LQFP Tray (Alt: LPC2101FBD48,151) RoHS : Compliant | 5,750 | ||
BU4815G-TR![]() | ROHM Semiconductor | Volt Supervisor Detect 09V to 48V 5Pin SSOP TR (Alt: BU4815G-TR) RoHS : Compliant | 0 | |||
LPC1345FBD48,151![]() | NXP Semiconductors | MCU 32bit LPC1300 ARM Cortex M3 RISC 32KB Flash 25V33V 48Pin LQFP Tray (Alt: LPC1345FBD48,151) RoHS : Compliant | 0 | |||
LPC1347FBD48,151![]() | NXP Semiconductors | MCU 32bit LPC1300 ARM Cortex M3 RISC 64KB Flash 25V33V 48Pin LQFP Tray (Alt: LPC1347FBD48,151) RoHS : Compliant | 0 | |||
LPC1342FBD48,151![]() | NXP Semiconductors | MCU 32bit LPC1300 ARM Cortex M3 RISC 16KB Flash 33V 48Pin LQFP Tray (Alt: LPC1342FBD48,151) RoHS : Compliant | 0 | |||
LPC1343FBD48,151![]() | NXP Semiconductors | ARM MCU 32bit ARM CortexM3 72 MHz 32 KB 8 KB 48 Pins LQFP (Alt: LPC1343FBD48,151) RoHS : Compliant | 0 | |||
LPC2102FBD48,151![]() | NXP Semiconductors | ARM MCU LPC Family LPC2000 Series Microcontrollers ARM7TDMI 32 bit 70 MHz 16 KB 48 Pins (Alt: LPC2102FBD48,151) RoHS : Compliant | 0 | |||
LPC1313FBD48,151![]() | NXP Semiconductors | ARM MCU LPC Family LPC1300 Series Microcontrollers ARM CortexM3 32 bit 72 MHz 32 KB 48 Pins (Alt: LPC1313FBD48,151) RoHS : Compliant | 0 | |||
LPC1346FBD48,151![]() | NXP Semiconductors | ARM MCU LPC Family LPC1300 Series Microcontrollers ARM CortexM3 32 bit 72 MHz 48 KB 48 Pins (Alt: LPC1346FBD48,151) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AM10CW-4815DEZ | Aimtec | RoHS : Compliant |
| 0 | |
AM4T-4815DH35Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM6TW-4815D-RZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
| AM50E-4815SZ-K | Aimtec | RoHS : Compliant |
| 0 | ||
| AM12T-4815SZ | Aimtec | RoHS : Compliant |
| 0 | ||
| AM20CW-4815SEZ | Aimtec | RoHS : Compliant |
| 0 | ||
AM3TI-4815DH30-RZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM5T-4815SH35Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
| AM1G-4815SEZ | Aimtec | RoHS : Compliant |
| 0 | ||
AM20C-4815SZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM30EW-4815SZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM3T-4815SZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM40E-4815SZ-K![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM5TW-4815DH35Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM6GH-4815DH30Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
![]() DB Roberts | 048150011407 | Essentra Components | 0 | |||
| 14815 | Heyco | BRASS CGPHT M25-150 | 0 | |||
| 17M20DIN34815B | Essentra Components | RETAINING WASHER, FOR 78 SCREW | 0 | |||
| 17M05DIN34815B | Essentra Components | FLAT WASHER, 5.3MM ID, M5 10 | 0 | |||
| 17M12DIN34815 | Essentra Components | FLAT WASHER, 13MM ID, M12 / 1/ | 0 | |||
| 354-8154-00 | Acumnet / Camcar | SCREW OVAL FLAT HD, TORX 5 - 40 X 3/8 THERMAL BLACK OXI | 0 | |||
| 17M08DIN34815B | Essentra Components | FLAT WASHER, 8.4MM ID, M8 516 | 0 | |||
| RBF-4.8-15-16 | Essentra Components | 0 | ||||
| 47-80-248-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 17M06DIN34815 | Essentra Components | 0 | ||||
| M4815 | Heyco | RSCG 750 GRAY | 0 | |||
| RBF-4.8-15-8 | Essentra Components | RIVET,BARBED,BLK,.188 IN HOLE, | 0 | |||
| 17M12DIN34815B | Essentra Components | FLAT WASHER, 13MM ID, M12 12 | 0 | |||
| 34815 | Essentra Components | 0 | ||||
| 47-10-248-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
![]() EBV Elektronik | ACPL-P481-500E | Broadcom Limited | (Alt: ACPL-P481-500E) RoHS : Compliant | 0 | ||
| ACPL-W481-560E | Broadcom Limited | Optocoupler LogicOut TotemPole DCIN 1CH 6Pin SO TR (Alt: ACPL-W481-560E) RoHS : Compliant | 0 | |||
LPC2102FBD48,151![]() | NXP Semiconductors | ARM MCU LPC Family LPC2000 Series Microcontrollers ARM7TDMI 32 bit 70 MHz 16 KB 48 Pins (Alt: LPC2102FBD48,151) RoHS : Compliant | 0 | |||
LPC2101FBD48,151![]() | NXP Semiconductors | MCU 16bit32bit LPC2000 ARM7TDMIS RISC 8KB Flash 18V33V 48Pin LQFP Tray (Alt: LPC2101FBD48,151) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 44-81518-23-2 | BJG Electronics | Tooling - Conne | 35 | ||
| SSI-LXR4815ID | Digi International Inc | Placeholder | 25 | |||
| 44-81518-17-1 | BJG Electronics | Tooling - Conne | 12 | |||
| 44-81518-17-2 | BJG Electronics | Tooling - Conne | 7 | |||
| 44-81518-21-2 | BJG Electronics | Tooling - Conne | 7 | |||
| 44-81518-25-2 | BJG Electronics | Tooling - Conne | 1 | |||
| 10-527248-15R | Amphenol Aerospace | Connector 38999 | 0 | |||
| 10-527248-15T | Amphenol Aerospace | Connector 38999 | 0 | |||
| 901-148-15 | Amphenol RF | Connector |
| 0 | ||
![]() Flip Electronics | NTD4815N-35G | onsemi | Stock, Ship Today RoHS : Compliant |
| 49,425 | |
LPC1345FBD48,151![]() | NXP Semiconductors | Stock RoHS : Compliant | 14,000 | |||
SC16C652BIB48,151![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 5,427 | ||
SC16C652BIB48,157![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 3,977 | ||
![]() Neutron USA | 09068481521 | HARTING Technology Group | DIN 41612 Connectors DIN F D20 METAL |
| 0 | |
| MGFS34815 | Cosel USA Inc | Isolated DC/DC Converters 3W 18-76Vin 15Vout 0.2A PCB SIP4 RoHS : Compliant |
| 0 | ||
| TDN 1-4815WI | Traco Power | Isolated DC/DC Converters 1W DIP Iso 18-75Vin 24Vout 45mA |
| 0 | ||
| TEQ 160-4815WIR | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| MGFS1R54815 | Cosel USA Inc | Isolated DC/DC Converters 1.5W 18-76Vin 15Vout 0.1A PCB 4-SIP RoHS : Compliant |
| 0 | ||
| MGW154815 | Cosel USA Inc | Isolated DC/DC Converters 15W 15V/30V 0.5A Through Hole RoHS : Compliant |
| 0 | ||
| THD 10-4815WIN | Traco Power | Isolated DC/DC Converters 18-75Vin 24V 416mA 10W Iso DC/DC |
| 0 | ||
| TMR 6-4815WIR | Traco Power | Isolated DC/DC Converters - SMD 6W 18-75Vin 24Vout 250mA SIP8 Iso Reg |
| 0 | ||
| 1648157 | Phoenix Contact | Heavy Duty Power Connectors Male B6 6P For Crimp Contacts RoHS : Compliant |
| 0 | ||
| THM 10-4815 | Traco Power | Isolated DC/DC Converters 10W 36-75Vin 24V 416mA, Medical Iso DIP-24 |
| 0 | ||
| THM 10-4815WI | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| MGFW1R54815 | Cosel USA Inc | Isolated DC/DC Converters 1.5W 18-76Vin +/-15V or 30Vout 0.05A SIP6 RoHS : Compliant |
| 0 | ||
| TDN 5-4815WI | Traco Power | Isolated DC/DC Converters 18-75Vin 24Vout 210mA 5W Iso DIP |
| 0 | ||
| TEL 6-4815 | Traco Power | Isolated DC/DC Converters - Through Hole 6W 36-75Vin 24Vout 250mA DIP-16 Metal Case |
| 0 | ||
| TEP 200-4815WIRCMF | Traco Power | Isolated DC/DC Converters |
| 0 | ||
![]() Pasternack Enterprises US | PE3C6848-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. SMA Male to Straight Cut Lead Cable 150 CM Length Using RG188-DS Coax., Radio frequency assembly SMA male to straight cut lead cable 150 cm length using RG188-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to straight cut lead cable 150 cm length using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and straight cut lead cable connection on the other. Our SMA to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a male to sexless coax assembly, PE3C6848-150CM, can also be known as a SMA plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA plug to straight cut lead sexless cable assembly PE3C6848-150CM is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10 GHz maximum frequency SMA male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6848-150CM can also be used in the other direction and will be straight cut lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to straight cut lead cable 150 cm length using RG188-DS coax. |
| 284 | |
| PE3FCA348-15M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 5.6 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 8-Fiber LC UPC to SC UPC, OM4 Multimode Distribution Cable, 5.6mm LSZH, 2.0mm breakout, Aqua-15M. Pasternack’s PE3FCA348-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 8-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA348-15M fiber optic cable with a 5.6 mm cable diameter and 42 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 84 | ||
| PE3FCA248-15M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNP, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC APC to SC APC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Plenum, 2.0mm breakout, Yellow-15M. Pasternack’s PE3FCA248-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 4-fiber cable assembly is equipped with SC/APC to SC/APC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA248-15M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/APC to SC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 51 | ||
| PE3FCA448-15M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM5, Fiber Diameter: 50/125, Cable Assembly Color: Lime Green, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber SC UPC to SC UPC, OM5 Multimode Distribution Cable, 6.2mm Plenum, 2.0mm breakout, Lime Green-15M. Pasternack’s PE3FCA448-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 12-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our lime green fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM5 fiber that offers cutting-edge Wideband Multimode Fiber (WBMMF) technology, supporting at least four WDM channels at 28 Gbps per channel over the 850-953nm wavelength range and a bandwidth of 28000 MHz·km. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA448-15M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for indoor high-speed deployments, guarantees reliability and superior signal integrity. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM5 multimode fiber optic cable that meets your requirements. |
| 46 | ||
| PE3FCA548-15M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC APC to LC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Riser, 2.0mm breakout, Yellow-15M. Pasternack’s PE3FCA548-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 4-fiber cable assembly is equipped with LC/APC to LC/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA548-15M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/APC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 34 | ||
| PE3C6348-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. Fire Rated 4.3-10 Female to 4.3-10 Female Low PIM Cable 150 cm Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 4.3-10 female to 4.3-10 female low PIM cable 150 cm length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 4.3-10 female to 4.3-10 female low PIM cable 150 cm length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and TC-SPP250-4310F-LP 4.3-10 cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assemblies have a female gender on end 1 and female on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable is a female to female coax assembly, PE3C6348-150CM, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-4310F-LP 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-4310F-LP 4.3-10 jack cable assembly PE3C6348-150CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-SPP250-4310F-LP 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-4310F-LP 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.3-10 female to 4.3-10 female low PIM cable 150 cm length using SPF-250 coax using Times Microwave parts. |
| 0 | ||
| PE3W04815LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to MCX Plug Right Angle Cable Using RG405 Coax with HeatShrink, LF Solder, RoHS. PE3W04815LF/HS is a MCX plug right angle to MCX plug right angle cable using RG405 coax. This Pasternack MCX plug right angle to MCX plug right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MCX for connector 2. MCX right angle to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to plug MCX right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04815LF/HS MCX plug right angle to MCX plug right angle cable assembly is constructed with RG405 coax. | 0 | |||
| PE3C5848-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum 4.1/9.5 Mini DIN Male Right Angle to 7/16 DIN Male Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN male right angle to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN male right angle to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.1/9.5 mini DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM right angle 4.1/9.5 mini DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 7/16 DIN cable is a male to male coax assembly, PE3C5848-150CM, can also be known as a low PIM right angle 4.1/9.5 mini DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 7/16 DIN plug cable assembly PE3C5848-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with right angle 4.1/9.5 mini DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN right angle male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5848-150CM can also be used in the other direction and will be 7/16 DIN male to right angle 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN right angle plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male right angle to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder. |
| 0 | ||
| PE3W00148-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. BNC Male to SHV Plug Cable 150 cm Length Using RG58 Coax., Radio frequency assembly BNC male to SHV plug cable 150 cm length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to SHV plug cable 150 cm length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and SHV cable connection on the other. Our BNC to SHV cable assemblies have a male gender on end 1 and plug on end 2. This BNC to SHV cable is a male to plug coax assembly, PE3W00148-150CM, can also be known as a BNC plug to SHV male cable assembly and will be shipped same-day as it is purchased. BNC plug to SHV male cable assembly PE3W00148-150CM is built with RG58 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency BNC male to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00148-150CM can also be used in the other direction and will be SHV plug to BNC male cable assembly if the opposite connectivity is required. BNC plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SHV cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SHV plug cable 150 cm length using RG58 coax. |
| 0 | ||
| PE3W05481-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. Push-On SMP Female Right Angle to Reverse Polarity TNC Female Bulkhead Cable 50 cm Length Using LMR-100 Coax., Radio frequency assembly push-on SMP female right angle to reverse polarity TNC female bulkhead cable 50 cm length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Push-on SMP female right angle to reverse polarity TNC female bulkhead cable 50 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and reverse polarity TNC bulkhead cable connection on the other. Our right angle SMP to reverse polarity TNC cable assemblies have a female gender on end 1 and female on end 2. This SMP to reverse polarity TNC cable is a female to female coax assembly, PE3W05481-50CM, can also be known as a right angle SMP jack to reverse polarity TNC jack cable assembly and will be shipped same-day as it is purchased. SMP jack to reverse polarity TNC jack cable assembly PE3W05481-50CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to reverse polarity TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05481-50CM can also be used in the other direction and will be reverse polarity TNC female bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to TNC reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to TNC cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female right angle to reverse polarity TNC female bulkhead cable 50 cm length using LMR-100 coax. |
| 0 | ||
| PE3W24815 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to BNC Male Cable Using PE-SR405FLJ Coax. PE3W24815 is a SMA female bulkhead to BNC male cable using PE-SR405FLJ coax. This Pasternack SMA female bulkhead to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our female SMA bulkhead to male BNC cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W24815 SMA female bulkhead to BNC male cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3C4815 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 2.92mm Male to Straight Cut Lead Cable Using PE-P086HF Coax., Radio frequency assembly 2.92mm male to straight cut lead cable using PE-P086HF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm male to straight cut lead cable using PE-P086HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and straight cut lead cable connection on the other. Our 2.92mm to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. This 2.92mm to straight cut lead cable is a male to sexless coax assembly, PE3C4815, can also be known as a 2.92mm plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to straight cut lead sexless cable assembly PE3C4815 is built with PE-P086HF which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to straight cut lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 2.92mm male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4815 can also be used in the other direction and will be straight cut lead sexless to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to straight cut lead cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to straight cut lead cable using PE-P086HF coax. | 0 | |||
| PE3C7848-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. N Male Right Angle to N Female Bulkhead Low PIM Cable 150 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly N male right angle to N female bulkhead low PIM cable 150 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N female bulkhead low PIM cable 150 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle type N cable connection on one end and N type bulkhead cable connection on the other. Our low PIM right angle type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C7848-150CM, can also be known as a low PIM right angle N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C7848-150CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM N type right angle male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7848-150CM can also be used in the other direction and will be N type female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Low PIM type N right angle plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female bulkhead low PIM cable 150 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C8248-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 4.3-10 Male to 7/16 DIN Male Right Angle Low PIM Cable 150 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 7/16 DIN male right angle low PIM cable 150 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male to 7/16 DIN male right angle low PIM cable 150 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a male to male coax assembly, PE3C8248-150CM, can also be known as a low PIM 4.3-10 plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C8248-150CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8248-150CM can also be used in the other direction and will be right angle 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 7/16 DIN male right angle low PIM cable 150 cm length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE348-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 59.055 inches. TNC Male to TNC Female Bulkhead Low Loss Test Cable 150 CM Length Using PE-P142LL Coax, RoHS., Radio frequency assembly TNC male to TNC female bulkhead low loss test cable 150 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC female bulkhead low loss test cable 150 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with TNC cable connection on one end and TNC bulkhead cable connection on the other. Our low loss test TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. This TNC to TNC cable is a male to female coax assembly, PE348-150CM, can also be known as a low loss test TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE348-150CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency TNC male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE348-150CM can also be used in the other direction and will be TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss test TNC plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female bulkhead low loss test cable 150 cm length using PE-P142LL coax, RoHS. |
| 0 | ||
![]() Relay Specialties | STA-4815 | Stancor | AC-DC Power Supply 15V; 0.6A; 120V In; Enclosed; Wall Plug; External; 9W |
| 6 | |
| 4481-5 | Nolatron | Anti-Tiedown Monitors 115 VAC, Base Mnt .5-5 Second Output |
| 1 | ||
![]() TE Connectivity | 794815-1 | TE Connectivity | 02P UMNL CAP HSG,HI TEMP Number of Positions: 2 Connector & Housing Type: Cap Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Wire-to-Panel Standard Rectangular Connector | 2 Cap Housing Crimp | Part Number: 794815-1 | Internal Number: 794815-1 | TE Connectivity RoHS : Compliant |
| 11,479 | |
| 934815002 | TE Connectivity | SRC Male Conduit Cover Primary Product Color: Black Primary Product Material: PA 66 Automotive Connector Accessory Type: Backshell Operating Temperature Range: -40 – 125 °C Operating Temperature Range: -40 – 257 °F Black PA 66 | Automotive Connector Accessories | Part Number: 934815002 | Internal Number: 2500035-3 | TE Connectivity RoHS : Compliant |
| 936 | ||
| 646481-5 | TE Connectivity | 2MM H.M.,B-19 SHROUD 4.5MM Connector Cover Type: PCB Mount Shroud Primary Product Color: Gray Primary Product Material: Glass Filled Polyester Number of Positions: 133 Operating Temperature (Max): 125 °C PCB Mount Shroud Gray | Connector Cap & Cover | Part Number: 646481-5 | Internal Number: 646481-5 | Glass Filled Polyester | TE Connectivity RoHS : Compliant |
| 336 | ||
| 448153-4 | TE Connectivity | AMPLIMITE,3C3,SZ 2,PLUG Number of Positions: 3 Connector & Housing Type: Plug Connector System: Cable-to-Cable Connector Mounting Type: Panel Mount Connector Shell Size: 2 D-Shaped Connector | 3 Plug Cable-to-Cable Panel Mount | Part Number: 448153-4 | Internal Number: 448153-4 | 2 | TE Connectivity RoHS : Compliant |
| 201 | ||
| 5-448153-4 | TE Connectivity | AMPLIMITE,3C3,SZ 2,PLUG Number of Positions: 3 Connector & Housing Type: Plug Connector System: Cable-to-Cable Connector Mounting Type: Panel Mount Connector Shell Size: 2 D-Shaped Connector | 3 Plug Cable-to-Cable Panel Mount | Part Number: 5-448153-4 | Internal Number: 5-448153-4 | 2 | TE Connectivity RoHS : Compliant |
| 56 | ||
![]() Vyrian | BFC233848159 | Vishay Intertechnologies | Film Capacitor, Polypropylene, 800V, 20% +Tol, 20% -Tol, 10uF, Through Hole Mount RoHS : Compliant | 17,650 | ||
| NTD4815N-35G | onsemi | Power Field-Effect Transistor, 6.9A I(D), 30V, 0.025ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 12,874 | |||
| LA4815M-TLM-H | onsemi | Audio Amplifier, 1 Func, Bipolar, PDSO8 RoHS : Compliant | 12,677 | |||
RP08-4815SA![]() | RECOM Power GmbH | DC-DC Regulated Power Supply Module, 1 Output, 8W, Hybrid RoHS : Compliant | 10,523 | |||
| 1648157 | Phoenix Contact | Rectangular Connector RoHS : Compliant | 9,705 | |||
| ACPL-P481-560E | Broadcom Limited | Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation RoHS : Compliant | 7,918 | |||
LPC2106FBD48,151![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, ARM7 CPU, 60MHz, CMOS, PQFP48 RoHS : Compliant | 7,866 | |||
| MAX14815ETK | Analog Devices (Maxim Integrated) | 6,613 | ||||
| ACPL-P481-500E | Broadcom Limited | RoHS : Compliant | 6,577 | |||
| CT394815 | Micron Technology, Inc | 6,021 | ||||
| NTD4815NH-35G | onsemi | Power Field-Effect Transistor, 6.9A I(D), 30V, 0.015ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 3,916 | |||
| URB4815LD-20WR3A2S | Mornsun Guangzhou Science & Technology | DC-DC Regulated Power Supply Module | 615 | |||
| URB4815LD-20WH | Mornsun Guangzhou Science & Technology | Analog Circuit | 530 | |||
| 0481.500HXM | Littelfuse Inc | Electric Fuse, Fast Blow, 0.5A, 125VAC, 125VDC, 40A (IR), Inline/holder RoHS : Compliant | 428 | |||
| 0481.500V | Littelfuse Inc | Electric Fuse, Fast Blow, 0.5A, 125VAC, 125VDC, 40A (IR), Inline/holder RoHS : Compliant | 287 | |||
![]() Waytek, Inc. | 12048159 | Aptiv PLC | 20-18 GA Metri-Pack 280 Series Male 12048159 Terminal Reel 2200/Reel RoHS : Compliant |
| 24,200 | |
| 12048159-L | Aptiv PLC | 20-18 Ga Metri-Pack 280 Series Male 12048159 Loose Terminal LOOSE PIECE |
| 24,015 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |