| データシートサーチシステム |
|
4863-N20-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() Avnet Americas | TDA4863GXUMA2![]() | Infineon Technologies AG | Power Factor Correction CONTRLR 0.02mA 8-Pin DSO - Tape and Reel (Alt: TDA4863GXUMA2) RoHS : Compliant |
| 7,500 | |
| 2-644486-3 | TE Connectivity | - Bag (Alt: 2-644486-3) RoHS : Compliant |
| 300 | ||
| C10-737486-3AS3 | Amphenol Corporation | - Bag (Alt: C10-737486-3AS3) RoHS : Not Compliant | 50 | |||
| C10-737486-3YS4 | Amphenol Corporation | - Bag (Alt: C10-737486-3YS4) RoHS : Not Compliant | 46 | |||
| C10-737486-3AS4 | Amphenol Corporation | - Bag (Alt: C10-737486-3AS4) RoHS : Not Compliant | 37 | |||
| C10-737486-3YS3 | Amphenol Corporation | - Bag (Alt: C10-737486-3YS3) RoHS : Not Compliant | 37 | |||
| 5159009486394111LF | Amphenol Corporation | - Trays (Alt: 5159009486394111LF) RoHS : Compliant |
| 0 | ||
| SGM4863YPTS16G/TR | SG Micro Corp | - Tape and Reel (Alt: SGM4863YPTS16G/TR) RoHS : Not Compliant |
| 0 | ||
| 84863-9001 | Molex | NMEA M12 POWER TAP TEE 3 FT - Bulk (Alt: 0848639001) RoHS : Compliant |
| 0 | ||
| MKP1848630094Y2 | Vishay Intertechnologies | - Bulk (Alt: MKP1848630094Y2) RoHS : Compliant |
| 0 | ||
| MAL204863682E3 | Vishay Intertechnologies | - Bulk (Alt: MAL204863682E3) RoHS : Compliant |
| 0 | ||
| 776486-3 | TE Connectivity | Cap Terminal Position Assurance 4 Position Dual Row "C"" Key Polybutylene Terephthalate Yellow" - Bag (Alt: 776486-3) RoHS : Compliant |
| 0 | ||
| MAL214863223E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, 22000 uF, 6.3 V, ? 20%, 3000 hours @ 105?C, Radial Leaded - Bulk (Alt: MAL214863223E3) RoHS : Compliant |
| 0 | ||
| 5159009486394AAKLF | Amphenol Corporation | - Trays (Alt: 5159009486394AAKLF) RoHS : Compliant |
| 0 | ||
| 2748630000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 2748630000) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 284863-1 | TE Connectivity | Single Wire Seal, Orange, Silicone; |Te Connectivity Amp 284863-1 RoHS : Compliant |
| 22,843 | |
| MP014863 | SPC Multicomp | Conn Housing, Rcpt, 5Pos, 1Row, 1.25Mm; |Multicomp Pro MP014863 RoHS : Compliant |
| 3,000 | ||
| 2-644486-3 | TE Connectivity | Conn, Header, 3Pos, 1Row, 2.54Mm; |Te Connectivity Amp 2-644486-3 RoHS : Compliant |
| 2,957 | ||
| 354863-E | TE Connectivity | Microstac; |Te Connectivity Erni 354863-E RoHS : Compliant |
| 1,250 | ||
| 014.86.353 | ETTINGER | Mounting Brackets, 15X12-M3; |Ettinger 014.86.353 RoHS : Compliant |
| 1,248 | ||
| 014.86.313 | ETTINGER | Mounting Brackets, M3-10X11X7.2-Ni; |Ettinger 014.86.313 RoHS : Compliant |
| 1,174 | ||
| 0054486399 | Weller Hand Tools GmbH | Xnt Kn Soldering Tip 2.0Mm; |Weller (Apex Tool Group) 0054486399 RoHS : Compliant |
| 428 | ||
| 354863-E | TE Connectivity | Microstac; |Te Connectivity Erni 354863-E RoHS : Compliant |
| 400 | ||
| MKP1848630094Y2 | Vishay Intertechnologies | Film Capacitor, 30Uf, 900V, Radial; |Vishay MKP1848630094Y2 RoHS : Compliant |
| 45 | ||
| MKP1848630924Y5 | Vishay Intertechnologies | Film Capacitor, 30Uf, 1.2Kv, Radial; |Vishay MKP1848630924Y5 RoHS : Compliant |
| 30 | ||
| FMCA2486-36 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2486-36 RoHS : Not Compliant |
| 16 | ||
| 20848-636 | nVent Schroff | Rear Panel, 128.4Mm X 426.4Mm, Aluminium; Panel Type:Rear Panel; Rack U Height:3U; Panel Material:Aluminum; Body Color:-; For Use With:Ratiopacpro Desktop Cases; External Height - Metric:128.4Mm; External Width - Metric:426.4Mm Rohs Compliant: Yes RoHS : Compliant |
| 14 | ||
| 009176004863906 | Kyocera AVX Components | Connector, Receptacle, 4Pos, 1Row, 3.2Mm; |Kyocera Avx 009176004863906 RoHS : Compliant |
| 5 | ||
| 4863 | Keystone Electronics Corp | Broaching Type Force-Fit Threaded Stando; |Keystone 4863 RoHS : Compliant |
| 0 | ||
| 4863 | Adafruit Industries | Adafruit Cyberdeck Hat For Raspberry Pi 400 & 500 |Adafruit 4863 RoHS : Not Compliant |
| 0 | ||
![]() RS | 486306 | RS Pro | MANUAL BALL VALVE 2-WAY NICKEL PLATED BRASS 22MM BSPP COMPRESSION 232PSI |
| 94 | |
| 4548-632-SS | RAF Electronic Hardware | STANDOFF; 1/4 HEX MALE/FEMALE; 6-32 THREAD;STAINLESS STEEL; 1.375LENGTH |
| 51 | ||
| 486334 | RS Pro | CHROME PLATED BRASS LINE MOUNTING HYDRAULIC BALL VALVE G 1/4 |
| 40 | ||
| 486344 | RS Pro | 28MM MANUAL BALL VALVE NICKEL PLATED BRASS 28 MM BSPP |
| 29 | ||
| 3048632 (UK 10 3-CC HESILED N 600 3POL) | Phoenix Contact | LEVER-TYPE FUSE TERMINAL BLOCK UK SERIES |
| 12 | ||
| 2084863 | RS Pro | H10B TOP ENTRY, HEAVY DUTY POWER CONNECTOR HOUSING, HOOD 2 LOCKING POINTS, M25 |
| 4 | ||
| OT25F3C (1SCA104863R1001) | ABB Low Voltage Products and Systems | MANUAL TRANSFER SWITCH 30A 3 POLES 600VAC, DIN RAIL / PANEL MOUNT , UL508 |
| 3 | ||
| 2834863 | RS Pro | M8 TO ACTUATOR/SENSOR CABLE, STRAIGHT FEMALE 3 WAY, PVC, BLACK, 15M |
| 2 | ||
| 548630 (ISOTP70M16) | nVent ERIFLEX | INSULATOR ISO TP 70M16 |
| 2 | ||
| 24863 | CR Seals | SINGLE LIP GREASE SEAL, I.D. 2.5 IN, O.D. 3 IN, THICKNESS 0.25 IN |
| 1 | ||
| 486340 | RS Pro | CHROME PLATED BRASS LINE MOUNTING HYDRAULIC BALL VALVE G 3/8 |
| 1 | ||
| THT-17-486-3 | Brady Worldwide Inc | THERMAL TRANSFER METALLIZED POLYESTER LABEL 1"H X 2"W ROLL OF 3000 LABELS |
| 1 | ||
| THT-18-486-3 | Brady Worldwide Inc | THERMAL TRANSFER METALLIZED POLYESTER LABEL 1"H X 3"W ROLL OF 3000 LABELS RoHS : Compliant |
| 1 | ||
| 4863 | Keystone Electronics Corp | STANDOFF, FORCE-FIT, ROUND, THREADED 4-40, LENGTH .250, OD .219, STAINLESS STEEL |
| 0 | ||
| 4863 | Adafruit Industries | ADAFRUIT CYBERDECK HAT FOR RASPBERRY PI 400 |
| 0 | ||
![]() Bisco Industries | HL48-6-3 | West Coast Aerospace | 2,050 | |||
| SPT-0048-632 | Volt Industrial Plastics | 518 | ||||
| WJ4548-632-A-0 | W.J. Roberts Co Inc | 457 | ||||
| 4548-632-B | RAF Electronic Hardware | 149 | ||||
| 5614-86-31 | Seastrom Mfg | 136 | ||||
| 4863 | Keystone Electronics Corp | 106 | ||||
| 4648-632-SS-20 | RAF Electronic Hardware | 80 | ||||
| 4548-632-SS-20 | RAF Electronic Hardware | 67 | ||||
| AS4863K06 | Allan Aircraft Supply Co LLC | 50 | ||||
| 4548-632-B-5 | RAF Electronic Hardware | 14 | ||||
| WJ4548-632-B-12 | W.J. Roberts Co Inc | 8 | ||||
| 572-4863-01-05-16 | Cambion Electronics Ltd | RoHS : Not Compliant | 8 | |||
| AS4863J03 | Allan Aircraft Supply Co LLC | 6 | ||||
| 94863A201 | HEX HEAD CAP SCREWS | 3 | ||||
| 4648-632-B | RAF Electronic Hardware | 1 | ||||
![]() Rochester Electronics | FAN48630BUC33X | onsemi | Switching Regulator, Current-mode, 1.5A, 3000kHz Switching Freq-Max, PBGA16 RoHS : Compliant |
| 6,000 | |
| FAN48630BUC31JX | onsemi | IC VOLT REG Fixed Step-Up Boost 1 OUT 3.15V, 3.6V 1.5A 16-BGA T/R RoHS : Compliant |
| 54,358 | ||
| FAN48632UC35X | onsemi | IC VOLT REG Fixed Step-Up Boost 1 OUT 3.5V, 3.7V 1.5A 16-BGA T/R RoHS : Compliant |
| 240,000 | ||
| FAN48630UC315X | onsemi | IC VOLT REG Fixed Step-Up Boost 1 OUT 3.15V, 3.33V 1.5A 16-BGA T/R RoHS : Compliant |
| 36,000 | ||
| FAN48632UC33X | onsemi | IC VOLT REG Fixed Step-Up Boost 1 OUT 3.3V, 3.49V 1.5A 16-BGA T/R RoHS : Compliant |
| 30,000 | ||
| FAN48630UC45X | onsemi | IC VOLT REG Fixed Step-Up Boost 1 OUT 4.5V, 4.76V 1.5A 16-BGA T/R RoHS : Compliant |
| 8,830 | ||
| TDA48632XKLA1 | Infineon Technologies AG | Power Factor Correction Discontinuous Conduction (DCM) 22V 8-DIP Tube RoHS : Compliant |
| 11,393 | ||
TDA48632GXUMA2![]() | Infineon Technologies AG | AC/DC STANDALONE RoHS : Compliant |
| 2,400 | ||
TDA4863![]() | Infineon Technologies AG | Power Factor Correction Discontinuous Conduction (DCM) 22V 8-DIP Tube RoHS : Compliant |
| 640 | ||
| FAN48630BUC31JX | Fairchild Semiconductor Corporation | IC VOLT REG Fixed Step-Up Boost 1 OUT 3.15V, 3.6V 1.5A 16-BGA T/R RoHS : Compliant |
| 73,700 | ||
| FAN48630BUC33X | Fairchild Semiconductor Corporation | Switching Regulator, Current-mode, 1.5A, 3000kHz Switching Freq-Max, PBGA16 RoHS : Compliant |
| 134,729 | ||
| FAN48630BUC3AJX | Fairchild Semiconductor Corporation | Switching Regulator, Current-mode, 1.5A, 3000kHz Switching Freq-Max RoHS : Compliant |
| 18,000 | ||
| FAN48630UC315X | Fairchild Semiconductor Corporation | IC VOLT REG Fixed Step-Up Boost 1 OUT 3.15V, 3.33V 1.5A 16-BGA T/R RoHS : Compliant |
| 347,890 | ||
| FAN48630UC35X | Fairchild Semiconductor Corporation | IC VOLT REG Fixed Step-Up Boost 1 OUT 3.5V, 3.7V 1.5A 16-BGA T/R RoHS : Compliant |
| 14,515 | ||
| FAN48630UC45X | Fairchild Semiconductor Corporation | IC VOLT REG Fixed Step-Up Boost 1 OUT 4.5V, 4.76V 1.5A 16-BGA T/R RoHS : Compliant |
| 8,473 | ||
![]() Sager | 4863 | Keystone Electronics Corp | Standoffs & Spacers .25L 4-40 FORCE FIT |
| 0 | |
| 2176486-3 | TE Connectivity | Ferrite Beads BMC 0805 220R 25% A Gen C RoHS : Compliant |
| 0 | ||
| 2944863 | Phoenix Contact | Enclosures for Industrial Automation CM 62-LG/H 35/BO BK | 0 | |||
| 2-146486-3 | TE Connectivity | Headers & Wire Housings 46 MODII HDR DRST UNSHRD STKG RoHS : Not Compliant | 0 | |||
| 1-1589486-3 | TE Connectivity | Headers & Wire Housings STM015L82IQ = SMT CONN RoHS : Not Compliant | 0 | |||
| 292486-3 | TE Connectivity | Headers & Wire Housings MINI CT SGL DIP V 3P NAT W/TUBE RoHS : Compliant | 0 | |||
| CN1-X0-22-048-63H-H | Carling Technologies | Circuit Breakers | 0 | |||
| 0848639002 | Molex | Molex MICRO-CHANGE M12 POWER TAP FM RoHS : Compliant | 0 | |||
| 776486-3 | TE Connectivity | Automotive Connectors AS 16, 4P CAP TPA, KEY 3, YEL |
| 0 | ||
| 1414863 | Phoenix Contact | Sensor Cables / Actuator Cables 5POS Power Cable Gray 10m RoHS : Compliant |
| 0 | ||
| IEG1-34863-15-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| 7-146486-3 | TE Connectivity | Headers & Wire Housings 46 MODII HDR DRST UNSHRD STKG RoHS : Compliant | 0 | |||
| 109S486-30 | Sanyo-Denki Co Ltd | AC Fans Axial Fan, 120x120x25mm, 100VAC, Sensor Voltage 9.6VDC-14.4VDC for 12VDC, Alarm |
| 0 | ||
| 0734194863 | Molex | CBL ASSYMCX PLUG RA/MCX JACK BHRD316 |
| 0 | ||
| 1-2176486-3 | TE Connectivity | Ferrite Beads BMC 0805 100R 25% A Gen C RoHS : Compliant |
| 0 | ||
![]() TME | 284863-1 | TE Connectivity | Gasket for wire; orange; 1.2÷2.1mm RoHS : Compliant |
| 20,000 | |
| 4863 | BM Group spa | Nut; M63; polyamide; 75mm; grey; Pitch: 1.5 |
| 15 | ||
| 1748630000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; socket; power supply; 250V RoHS : Compliant |
| 4 | ||
| 4863 | Keystone Electronics Corp | Spacer sleeve; 6.35mm; Int.thread: UNC4-40; cylindrical; push-in |
| 0 | ||
| 10048634 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 5; THT; 3A; 250V |
| 0 | ||
| 1748639 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 76A; 1kV RoHS : Compliant |
| 0 | ||
| 2486380000 | Weidmüller Interface GmbH & Co. KG | 2486380000 RoHS : Compliant |
| 0 | ||
| 42486301 | Bopla | Mounting plate; steel; 2mm; Polysafe |
| 0 | ||
| 10048636 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 6; THT; 3A; 250V |
| 0 | ||
| 11G48630 | Lovato Electric Inc | Auxiliary contacts; side; Contacts: (NC + NO) lagging; Range: 30s |
| 0 | ||
| 10048637 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 6; THT; 3A; 250V |
| 0 | ||
| 00114863 | GSR | Tap: metric; M18; fine thread,right hand thread; 1.5; L: 80mm; 11mm |
| 0 | ||
| 10048635 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 5; THT; 3A; 250V |
| 0 | ||
| 1848639 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 10A RoHS : Compliant |
| 0 | ||
| 84863 | Delock | Cable; DisplayPort plug,both sides; DisplayPort 1.2; 10m; white |
| 0 | ||
![]() ComSIT USA | TDA48632G | Infineon Technologies AG | POWER FACTOR CONTROLLER IC FOR HIGH POWER FACTOR AND LOW THD Power Factor Controller, BIPolar, PDSO8 RoHS : Compliant | 1,810 | ||
| LM4863MTE | National Semiconductor Corporation | Audio Amplifier, 3.2W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant | 643 | |||
| LM4863MT | National Semiconductor Corporation | DUAL 2.2W AUDIO AMPLIFIER PLUS STEREO HEADPHONE FUNCTION Audio Amplifier, 1.5W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant | 404 | |||
| MKP1848635704P5 | Wima | METALLIZED POLYPROPYLENE FILM CAPACITOR Film Capacitor, Polypropylene, 700V, 5% +Tol, 5% -Tol, 35uF, Through Hole Mount RoHS : Compliant | 63 | |||
![]() Interstate Connecting Components | 354863-E | TE Connectivity | MICROSTAC 10-PIN VERTICAL SMT RoHS : Compliant |
| 325 | |
| IEG1-34863-15-V | Sensata Circuit Breakers |
| 1 | |||
| 2176486-3 | TE Connectivity | BMC 0805 220R 25% A GEN C RoHS : Compliant |
| 0 | ||
| 5159009486354AAKLF | Amphenol FCi | 5159009486354AAKLF-DIN TYP F R | 0 | |||
| 5159009486394111LF | Amphenol FCi | DIN PWR MALE RoHS : Compliant |
| 0 | ||
| 234863-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCTXR40BW00-1006BI RoHS : Compliant | 0 | |||
| ZPF000000000104863 | TE Connectivity | FDBA 50-12-10 SN-K-A6207 RoHS : Compliant | 0 | |||
| 1743486-3 | TE Connectivity | MTII INJECTOR 2P PLUG ASSY RoHS : Compliant | 0 | |||
| 2486356-1 | TE Connectivity | BRACKET PROTECTION PANE BCC | 0 | |||
| 776486-3 | TE Connectivity | AS 16, 4P CAP TPA, KEY 3, YEL |
| 0 | ||
| 5159009486394AAKLF | Amphenol FCi | DIN PWR HDR RA STB F RoHS : Compliant |
| 0 | ||
| 1-2176486-3 | TE Connectivity | BMC 0805 100R 25% A GEN C RoHS : Compliant |
| 0 | ||
| 172486-3 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| ZPF000000000204863 | TE Connectivity | DMC-MD 24 A-S | 0 | |||
| 2-644486-3 | TE Connectivity | 03P MTA100 SHRDED HDR ASSY SN RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | 21A00486-322416 | SOURIAU-SUNBANK |
| 0 | ||
| CA-628486-30807 | Amphenol Corporation |
| 0 | |||
| 73-2734863-1 | SOURIAU-SUNBANK |
| 0 | |||
| 21A00486-323216 | SOURIAU-SUNBANK |
| 0 | |||
| 21A00486-321616 | SOURIAU-SUNBANK |
| 0 | |||
![]() Rutronik | C10-737486-3YS3 | Amphenol Interconnect Products Inc | 03P EPOWER PLUG FOR 6,0MM CAB RoHS : Compliant |
| 50 | |
![]() Chip 1 Exchange | 5748634-1 | TE Connectivity | INSTOCK RoHS : Compliant | 36,263 | ||
| 5159009486394AAKLF | Amphenol Corporation | INSTOCK | 1,956 | |||
| 5748636-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,591 | |||
| XBT48634-01 | SOLEC | INSTOCK | 1,250 | |||
| LM4863MT | INSTOCK | 369 | ||||
| 48634-01 | INSTOCK | 240 | ||||
| NTD4863NT4G | onsemi | INSTOCK RoHS : Compliant | 238 | |||
| 14.86.313 | ETTGR | INSTOCK | 2 | |||
![]() Avnet Abacus | 848633-001![]() | TE Connectivity | Heat Shrink Boot Straight 16 4064 mm Black 385 978 mm (Alt: 848633-001) RoHS : Compliant | 450 | ||
| 354863-E | TE Connectivity | Mezzanine Connector Hermaphroditic 08 mm 1 Rows 10 Contacts Surface Mount Straight (Alt: 354863-E) RoHS : Compliant | 0 | |||
| 172486-3 | TE Connectivity | (Alt: 172486-3) RoHS : Compliant | 0 | |||
| 172486-3 | TE Connectivity | (Alt: 172486-3) RoHS : Compliant | 0 | |||
| 234863-000 | TE Connectivity | (Alt: 234863-000) RoHS : Compliant | 0 | |||
| 814863-000 | TE Connectivity | (Alt: 814863-000) RoHS : Compliant | 0 | |||
| 814863-000 | TE Connectivity | (Alt: 814863-000) RoHS : Compliant | 0 | |||
| 7-146486-3 | TE Connectivity | (Alt: 7-146486-3) RoHS : Compliant | 0 | |||
| 1848630000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1848630000) RoHS : Compliant | 0 | |||
| 1486360000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block F 23 POS 508mm Screw ST Cable Mount 10A Box (Alt: 1486360000) RoHS : Compliant | 0 | |||
| MAL204863682E3 | Vishay Intertechnologies | (Alt: MAL204863682E3) RoHS : Compliant | 0 | |||
| MAL214863223E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor 22000 uF 63 V 20 3000 hours 105C Radial Leaded (Alt: MAL214863223E3) RoHS : Compliant | 0 | |||
| MKP1848630094Y2 | Vishay Intertechnologies | Power Film Capacitor Metallized PP Radial Box 2 Pin 30 uF 5 Through Hole 900 V (Alt: MKP1848630094Y2) RoHS : Compliant | 0 | |||
| 5159009486394111LF | Amphenol Corporation | Conn DIN 41612 M 48 POS 508mm Solder RA ThruHole Box (Alt: 5159009486394111LF) RoHS : Compliant | 0 | |||
| 5159009486394AAKLF | Amphenol Corporation | DIN 41612 Connector 5159 Series 48 Contacts Header 508 mm 3 Row z b d (Alt: 5159009486394AAKLF) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2486390-3 | TE Connectivity | (Alt: 2486390-3) RoHS : Compliant | 0 | ||
| 2486390-2 | TE Connectivity | (Alt: 2486390-2) RoHS : Compliant | 0 | |||
| 2486390-5 | TE Connectivity | (Alt: 2486390-5) RoHS : Compliant | 0 | |||
| 2486390-6 | TE Connectivity | (Alt: 2486390-6) RoHS : Compliant | 0 | |||
| 2486390-7 | TE Connectivity | (Alt: 2486390-7) RoHS : Compliant | 0 | |||
| 2486390-8 | TE Connectivity | (Alt: 2486390-8) RoHS : Compliant | 0 | |||
| 2486390-1 | TE Connectivity | (Alt: 2486390-1) RoHS : Compliant | 0 | |||
| 2486390-4 | TE Connectivity | (Alt: 2486390-4) RoHS : Compliant | 0 | |||
![]() Avnet Silica | SLG4AX48636V | Renesas Electronics Corporation | STQFN14 GreenPAK Linwave (Alt: SLG4AX48636V) RoHS : Compliant | 0 | ||
| FAN48632UC33X | onsemi | (Alt: FAN48632UC33X) RoHS : Compliant | 0 | |||
| FAN48630UC50X | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC50X) RoHS : Compliant | 0 | |||
| FAN48630UC33X | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC33X) RoHS : Compliant | 0 | |||
| FAN48630UC37AX | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC37AX) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | LM4863LQ/NOPB![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,275 | |
| LM4863MTE | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 219 | ||
| 3448-63 | 3M | IN STOCK SHIP TODAY |
| 120 | ||
TDA4863G![]() | Infineon Technologies AG | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| 748634-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 24 | ||
TDA4863-2G![]() | Infineon Technologies AG | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
![]() DB Roberts | SO4-8632-6 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .0 |
| 135 | |
| 4548-632-A | RAF Electronic Hardware | 0 | ||||
| M4863 | Heyco | RSCG 1.750 GRAY | 0 | |||
| 4548-632-AL-7 | RAF Electronic Hardware | 0 | ||||
| 4548-632-S-1 | RAF Electronic Hardware | 0 | ||||
| 4148-632-A-7 | RAF Electronic Hardware | 0 | ||||
| BSO4-8632-26 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . | 0 | |||
| SO4-8632-26 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .0 | 0 | |||
| 2148-632-AL | RAF Electronic Hardware | 0 | ||||
| 4548-632-BMODB=3/8-5 | RAF Electronic Hardware | MALE-FEMALE STANDOFFS MOD | 0 | |||
| SO4-8632-22 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .0 | 0 | |||
| 4863-10 | HeliCoil | TAP M10X1.5 SPI/PT PLUG 4H | 0 | |||
| 464863 | Essentra Components | 0 | ||||
| BSO4-8632-12 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . | 0 | |||
| SO4-8632-24 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .0 | 0 | |||
![]() EBV Elektronik | FAN48632BUC33X | onsemi | (Alt: FAN48632BUC33X) RoHS : Compliant | 0 | ||
| FAN48630UC37AX | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC37AX) RoHS : Compliant | 0 | |||
| SGM4863YTQG20G/TR | SG Micro Corp | (Alt: SGM4863YTQG20G/TR) RoHS : Compliant | 0 | |||
![]() Flip Electronics | FAN48630UC315X | onsemi | Stock, Ship Today RoHS : Compliant |
| 30,000 | |
| FAN48630UC33X | onsemi | Stock, Ship Today RoHS : Compliant |
| 30,000 | ||
| FAN48630UC35X | onsemi | Stock, Ship Today RoHS : Compliant |
| 18,209 | ||
| FAN48632UC35X | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,000 | ||
![]() Master Electronics | 814863-000 | TE Connectivity | 202D932-4-0 RoHS : Compliant |
| 39 | |
| 2176486-3 | TE Connectivity | BMC 0805 220R 25% A Gen C RoHS : Compliant |
| 0 | ||
| 2-146486-3 | TE Connectivity | 46 MODII HDR DRST UNSHRD STKG MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 354863-E | TE Connectivity | MICROS STV 10 407 188 * 0007 J 3 354863 RoHS : Compliant |
| 0 | ||
| RLL-48634000 | Carling Technologies | LTILA6M1SBLRCFN BLK/250N RoHS : Compliant |
| 0 | ||
| 748636-1 | TE Connectivity | Conn Housing RCP 44 POS Crimp ST Bulk RoHS : Not Compliant |
| 0 | ||
| 24863-00 | Honeywell Sensing and Control | Obsolete (Pressure Type) Pressure Sensor RoHS : Compliant |
| 0 | ||
| 776486-3 | TE Connectivity | AS 16 4P CAP TPA KEY 3 YEL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1414863 | Phoenix Contact | Power cable - 5-position - PUR halogen-free - gray RAL 7001 - shielded (Advanced Shielding Technology) - Plug angled M12 - L-coded - on free cable end - cable length: 10 m - for direct current up to 16 A/63 V RoHS : Compliant |
| 0 | ||
| 5159009486394AAKLF | Amphenol FCi | Conn DIN 41612 HDR 48 POS 5.08mm Solder RA Thru-Hole Box RoHS : Compliant |
| 0 | ||
| IEG1-34863-15-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| 4863800 | Marathon Special Products | Fuse Block 60A 600VDC/600VAC Lug Screw Mount RoHS : Compliant |
| 0 | ||
| 7-146486-3 | TE Connectivity | 46 MODII HDR DRST UNSHRD STKG MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1-2176486-3 | TE Connectivity | BMC 0805 100R 25% A Gen C RoHS : Compliant |
| 0 | ||
| ZPF000000000004863 | TE Connectivity | 901-20 RT 2-7-0 SN-T MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C2486-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Low Loss Cable 36 Inch Length Using LMR-240-UF Coax., Radio frequency assembly SMA male to SMA male low loss cable 36 inch length using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 36 inch length using LMR-240-UF coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2486-36 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C2486-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 36 inch length using LMR-240-UF coax. |
| 5,190 | |
| PE3C8486-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 36 inches. Fire Rated 7/16 DIN Male to N Female Bulkhead Low PIM Cable 36 Inch Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 7/16 DIN male to N female bulkhead low PIM cable 36 inch length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 7/16 DIN male to N female bulkhead low PIM cable 36 inch length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and type N bulkhead cable connection on the other. Our low PIM 7/16 DIN to N type cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to type N cable is a male to female coax assembly, PE3C8486-36, can also be known as a low PIM 7/16 DIN plug to type N jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to N type jack cable assembly PE3C8486-36 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8486-36 can also be used in the other direction and will be type N female bulkhead to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 7/16 DIN male to N female bulkhead low PIM cable 36 inch length using SPF-250 coax using Times Microwave parts. |
| 42 | ||
| PE7486-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 20 Watts Up to 26.5 GHz. PE7486-30 is a fixed 30 dB attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 30 dB. The Pasternack PE7486-30 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 30 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7486-30 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 7 | ||
| PE3C6486-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX001, RF Cable Type: PE-SR047LL, RF Cable Impedance: 50 Ohm, Length: 36 inches. 2.92mm Male to 2.92mm Male Low Loss Cable 36 Inch Length Using 047 Coax., Radio frequency assembly 2.92mm male to 2.92mm male low loss cable 36 inch length using 047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 2.92mm male to 2.92mm male low loss cable 36 inch length using 047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our low loss 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 2.92mm cable is a male to male coax assembly, PE3C6486-36, can also be known as a low loss 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE3C6486-36 is built with PE-SR047LL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 45 GHz maximum frequency 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male low loss cable 36 inch length using 047 coax. |
| 4 | ||
| PE34486-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMC Plug Right Angle to SMC Jack Bulkhead Cable 36 Inch Length Using PE-B100 Coax., Radio frequency assembly SMC plug right angle to SMC jack bulkhead cable 36 inch length using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug right angle to SMC jack bulkhead cable 36 inch length using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMC cable connection on one end and SMC bulkhead cable connection on the other. Our right angle SMC to SMC cable assemblies have a plug gender on end 1 and jack on end 2. This SMC to SMC cable is a plug to jack coax assembly, PE34486-36, can also be known as a right angle SMC male to SMC female cable assembly and will be shipped same-day as it is purchased. SMC male to SMC female cable assembly PE34486-36 is built with PE-B100 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with right angle SMC to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMC right angle plug to SMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34486-36 can also be used in the other direction and will be SMC jack bulkhead to right angle SMC plug cable assembly if the opposite connectivity is required. SMC right angle male to SMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug right angle to SMC jack bulkhead cable 36 inch length using PE-B100 coax. |
| 0 | ||
| PE33486-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using RG393 Coax., Radio frequency assembly SMA male to SMA male cable 36 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 36 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and male on end 2. PE33486-36 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. SMA plug to SMA plug cable assembly PE33486-36 is built with RG393 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33486-36 RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C4863-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 60 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 60 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 60 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863-60, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863-60 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863-60 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 60 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE34863LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. Mini UHF Female to Mini UHF Male Cable Using RG58 Coax with HeatShrink, LF Solder. PE34863LF/HS is a Mini UHF female to Mini UHF male cable using RG58 coax. This Pasternack Mini UHF female to Mini UHF male cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm Mini UHF for connector 2. Our female Mini UHF to male Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34863LF/HS Mini UHF female to Mini UHF male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3C4486-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Female Bulkhead to SSMC Plug Right Angle Cable 36 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female bulkhead to SSMC plug right angle cable 36 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SSMC plug right angle cable 36 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle SSMC cable connection on the other. Our SMA to right angle SSMC cable assemblies have a female gender on end 1 and plug on end 2. This SMA to SSMC cable is a female to plug coax assembly, PE3C4486-36, can also be known as a SMA jack to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. SMA jack to SSMC male cable assembly PE3C4486-36 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA female bulkhead to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4486-36 can also be used in the other direction and will be right angle SSMC plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SSMC plug right angle cable 36 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3C4863 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to TNC Male Cable Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable using PE-SR405FLJ coax. | 0 | |||
| PE3W14863LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. N Male to QMA Male Cable Using TFT-5G-402 Coax with HeatShrink, LF Solder. PE3W14863LF/HS is a N male to QMA male cable using TFT-5G-402 coax. This Pasternack N male to QMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. Our male N to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14863LF/HS N male to QMA male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3W14863 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. N Male to QMA Male Cable Using TFT-5G-402 Coax. PE3W14863 is a N male to QMA male cable using TFT-5G-402 coax. This Pasternack N male to QMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. Our male N to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14863 N male to QMA male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3C4863-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863-12, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863-12 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE4863 | Pasternack Enterprises | Key Specifications, Polarity: Reverse Polarity, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: Bulkhead, Interface Type 1: RG178, Interface Type 2: RG196. RP-SMA Female Bulkhead Mount Connector Solder Attachment for RG178, RG196, .235 inch D Hole. PE4863 reverse polarity SMA female bulkhead coaxial connector has an interface type of RG178, RG196 and a 50 Ohm impedance. Pasternack reverse polarity SMA female bulkhead connector uses shield/contact solder/solder as an attachment method. The Pasternack SMA coaxial connector has a brass body with nickel plating. This reverse polarity SMA female bulkhead coaxial RF connector is REACH compliant. This Pasternack reverse polarity female SMA bulkhead connector will ship the same day as purchased. Our bulkhead SMA reverse polarity female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well. |
| 0 | ||
| PE3W24863 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SMA Female to BNC Female Bulkhead Cable Using RG188-DS Coax. PE3W24863 is a SMA female to BNC female bulkhead cable using RG188-DS coax. This Pasternack SMA female to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our female SMA to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24863 SMA female to BNC female bulkhead cable assembly is constructed with RG188-DS coax. | 0 | |||
![]() Vyrian | LM4863MTEX/NOPB | National Semiconductor Corporation | Audio Amplifier, 3.2W, 2 Channel(s), 1 Func, PDSO20 RoHS : Compliant | 16,445 | ||
| TDA4863 | NXP Semiconductors | Power Factor Controller, PDIP8 | 12,672 | |||
TDA4863-2![]() | Infineon Technologies AG | Power Factor Controller, BIPolar, PDIP8 RoHS : Compliant | 12,283 | |||
| NTD4863NA-1G | onsemi | Power Field-Effect Transistor, 9.2A I(D), 25V, 0.014ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 11,760 | |||
| NTD4863N-1G | onsemi | Power Field-Effect Transistor, 9.2A I(D), 25V, 0.014ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 10,302 | |||
LM4863MDC![]() | Texas Instruments | Audio Amplifier, 1.5W, 2 Channel(s), 1 Func | 6,822 | |||
| 1754863 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,288 | |||
| CT324863 | Micron Technology, Inc | 5,963 | ||||
TDA4863XKLA1![]() | Infineon Technologies AG | Power Factor Controller, PDIP8 RoHS : Compliant | 5,339 | |||
| CT148634 | Micron Technology, Inc | 5,322 | ||||
| 2944863 | Phoenix Contact | Enclosures/Accessories | 5,307 | |||
| LM4863M | Texas Instruments | Audio Amplifier, 1.5W, 2 Channel(s), 1 Func, PDSO16 | 4,501 | |||
LM4863LQ![]() | Texas Instruments | Audio Amplifier, 3.2W, 2 Channel(s), 1 Func RoHS : Not Compliant | 4,118 | |||
| LM4863MTEX | National Semiconductor Corporation | Audio Amplifier, 3.2W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant | 785 | |||
TDA48632GXUMA2![]() | Infineon Technologies AG | Power Factor Controller RoHS : Compliant | 452 | |||
![]() Waytek, Inc. | 148630-91W | General Cable Technologies Corporation | 10GA SXL Red Cross-Link Automotive Wire XLPE -51C to 125C |
| 10,250 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |