| データシートサーチシステム |
|
4953-S08-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() TME | 2-84953-0 | TE Connectivity | Connector: FFC/FPC; data; tinned; SMT; 1A; 200V; FPC; PIN: 20; right RoHS : Compliant |
| 78,000 | |
| 2-84953-4 | TE Connectivity | Connector: FFC/FPC; data; tinned; SMT; 1A; 200V; FPC; PIN: 24; right RoHS : Compliant |
| 16,800 | ||
| 4953 | Keystone Electronics Corp | Tip: solder lug; THT; brass; tinned RoHS : Compliant |
| 2,913 | ||
| 31404-9532 | Molex | Female; PIN: 8; straight; crimped; black; PBT; 2.54mm; Type: sealed |
| 650 | ||
| M85049/53-10W | Amphenol Corporation | Enclosure for connectors: D-Sub; straight; unshielded RoHS : Not Compliant |
| 320 | ||
| 1249530 | Lapp Group | Wire; ÖLFLEX® HEAT 180 SiF A; silicone; SiF A; 1x16mm2; stranded RoHS : Compliant |
| 55 | ||
| 2904953 | Phoenix Contact | Automation module: safety relay; 24VDC; IN: 2; PSRmini; -40÷60°C RoHS : Compliant |
| 2 | ||
| 0034953 | Lapp Group | Wire; ÖLFLEX® CLASSIC 100 CY; 3G10mm2; PVC; transparent,grey RoHS : Compliant |
| 0 | ||
| 1-84953-4 | TE Connectivity | Connector: FFC/FPC; data; SMT; PIN: 14; 1mm; horizontal RoHS : Compliant |
| 0 | ||
| 1495300000 | Weidmüller Interface GmbH & Co. KG | Tip: ring; M4; 4÷4mm2; for cable; non-insulated; 4.3mm RoHS : Compliant |
| 0 | ||
| 2649530000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; power supply; CH; 15A; 630V |
| 0 | ||
| 10049530 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 28; SMT; 3A; 250V |
| 0 | ||
| 10054953 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 32; THT; 3A; 250V |
| 0 | ||
| 17 X 4953 | OPTIBELT GmbH | Wedge belt |
| 0 | ||
| 10049531 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 28; SMT; 3A; 250V |
| 0 | ||
![]() Avnet Americas | 84953-6 | TE Connectivity | - Tape and Reel (Alt: 84953-6) RoHS : Compliant |
| 33,000 | |
| 84953-8 | TE Connectivity | - Tape and Reel (Alt: 84953-8) RoHS : Compliant |
| 9,000 | ||
| 1-84953-1 | TE Connectivity | - Tape and Reel (Alt: 1-84953-1) RoHS : Compliant |
| 6,000 | ||
| 84953-4 | TE Connectivity | - Tape and Reel (Alt: 84953-4) RoHS : Compliant |
| 3,000 | ||
| 2-84953-0 | TE Connectivity | - Tape and Reel (Alt: 2-84953-0) RoHS : Compliant |
| 1,200 | ||
| 1-174953-1 | TE Connectivity | - Rail/Tube (Alt: 1-174953-1) RoHS : Compliant |
| 78 | ||
| A495303 | Eaton Corporation | - Bulk (Alt: A495303) RoHS : Compliant |
| 75 | ||
| M85049/53-10N | Glenair Inc | - Bulk (Alt: M85049/53-10N) RoHS : Not Compliant |
| 0 | ||
| 2842495-3 | TE Connectivity | 2x3P TB HDR VT (180) w/ Flg 3.5, BK - Boxed Product (Development Kits) (Alt: 2842495-3) RoHS : Not Compliant |
| 0 | ||
| 2-84953-7 | TE Connectivity | - Tape and Reel (Alt: 2-84953-7) RoHS : Compliant |
| 0 | ||
CS495314-CVZ![]() | Cirrus Logic | - Bulk (Alt: CS495314-CVZ) RoHS : Compliant |
| 0 | ||
| H4953RDYA | TE Connectivity | - Boxed Product (Development Kits) (Alt: 9-1879633-6) RoHS : Not Compliant |
| 0 | ||
| M85049/53-10N | Amphenol Corporation | - Bulk (Alt: A850495310N) RoHS : Not Compliant |
| 0 | ||
| M850495312X | Amphenol Corporation | M85049/53-12X - Bulk (Alt: A850495312X) RoHS : Not Compliant | 0 | |||
| KPT45495-381 | ITT Interconnect Solutions | - Bulk (Alt: KPT45495-381) RoHS : Not Compliant | 0 | |||
![]() Newark | 794953-4 | TE Connectivity | Plug And Socket Connector Housing; Product Range:Val-U-Lok Series Connector System; Gender:Plug; No. Of Positions:4Positions; Pitch Spacing:4.2Mm; For Use With:Val-U-Lok Series Connector System; Colour:Natural Rohs Compliant: Yes RoHS : Compliant |
| 4,000 | |
| 84953-5 | TE Connectivity | Fpc Connector, Receptacle 5Pos 1Mmpitch; |Te Connectivity Amp 84953-5 RoHS : Compliant |
| 2,490 | ||
| 4953 | Keystone Electronics Corp | Test Point, Pcb, Through Hole; Product Range:-; Connector Colour:-; Connector Mounting:Through Hole Mount; Mounting Hole Dia:1.19Mm; Contact Material:Brass; Contact Plating:Tin Plated Contacts Rohs Compliant: Yes |Keystone 4953 RoHS : Compliant |
| 1,681 | ||
| 2-794953-4 | TE Connectivity | Plug Housing, Panel Mount, 94V-2, 24Way; |Te Connectivity Amp 2-794953-4 RoHS : Compliant |
| 1,538 | ||
| TLE4953CHAMA3 | Infineon Technologies AG | Hall Effect Sensor Sso 2Pin 4.5V 20 V; |Infineon Technologies TLE4953CHAMA3 RoHS : Compliant |
| 1,336 | ||
| 1-84953-0 | TE Connectivity | Ffc/Fpc Board Connector, Surface Mount; |Te Connectivity Amp 1-84953-0 RoHS : Compliant |
| 1,062 | ||
| 1-84953-6 | TE Connectivity | Ffc/Fpc Connector, Receptacle 16 Positio; |Te Connectivity Amp 1-84953-6 RoHS : Compliant |
| 752 | ||
| 1-84953-6 | TE Connectivity | Connector, Ffc/Fpc, Rcpt, 16Pos, 1Mm; Pitch Spacing:1Mm; No. Of Contacts:16Contacts; Gender:Receptacle; Product Range:Fpc Series; Contact Termination Type:Surface Mount; Contact Position:Top; No. Of Rows:1 Row Rohs Compliant: Yes RoHS : Compliant |
| 607 | ||
| 1-84953-0 | TE Connectivity | Fpc Connetcor, Plug, 10Pos, 1Row; Pitch Spacing:1Mm; No. Of Contacts:10Contacts; Gender:Plug; Product Range:-; Contact Termination Type:Surface Mount; Contact Position:Top; No. Of Rows:1 Row; Contact Plating:Tin Plated Contacts Rohs Compliant: Yes RoHS : Compliant |
| 541 | ||
| 84953-5 | TE Connectivity | Fpc Connector, Receptacle 5 Position 1Mmpitch; Pitch Spacing:1Mm; No. Of Contacts:5Contacts; Gender:Receptacle; Product Range:Fpc Series; Contact Termination Type:Surface Mount; Contact Position:Top; No. Of Rows:1 Row Rohs Compliant: Yes RoHS : Compliant |
| 392 | ||
| ZW-05-12-G-S-495-395 | Samtec Inc | Conn Stack Brd, 2.54Mm, 5Pos, Hdr; |Samtec, Inc. ZW-05-12-G-S-495-395 RoHS : Compliant |
| 326 | ||
| 2-794953-0 | TE Connectivity | Plug Housing, Panel Mount, 94V-2, 20Way; |Te Connectivity Amp 2-794953-0 RoHS : Compliant |
| 153 | ||
| 2904953 | Phoenix Contact | Safety Relay, 250Vac, 6A, Din Rail; |Phoenix Contact 2904953 (Alternate Part Number: 4046356905015 RoHS : Compliant |
| 43 | ||
| MP014953 | SPC Multicomp | Cable, Triumph, 10Awg, Transparent, 100; |Multicomp Pro MP014953 RoHS : Compliant |
| 31 | ||
| 4953 | Adafruit Industries | Kailh Mechanical Key Switches - Linear Black - 10 Pack - Cherry Mx Black Compatible |Adafruit 4953 RoHS : Not Compliant |
| 0 | ||
![]() RS | 1-84953-5 | TE Connectivity | 1MM FPC HORZ.TOP CONT.ASSY 15P, FPC CONNECTORS RoHS : Compliant |
| 245 | |
| 7649536 | RS Pro | NON-RESETTABLE WIRE ENDED FUSE 3.18MM DIAMETER EPOXY COATED 0.5A 250VAC |
| 130 | ||
| A495305 | Eaton Electronics | DISCONNECT BLOCK |
| 50 | ||
| 4953598 | RS Pro | COMBINATION WRENCH CHROME VANADIUM STEEL 0.94" (24MM) SIZE 12.48" LENGTH |
| 9 | ||
| 2454953 (25532574) (SSCIA0430150-050RS) | RS Pro | SCREW, 7/16-14 X 1 1/2 SOCKET SET SCREW-CUP POINT PLAIN FINISH |
| 5 | ||
| 4953475 | RS Pro | COMBINATION WRENCH CHROME VANADIUM STEEL 0.51" (13MM) SIZE 7.09" LENGTH |
| 4 | ||
| 4953611 | RS Pro | COMBINATION WRENCH CHROME VANADIUM STEEL 1.18" (30MM) SIZE 15.51" LENGTH |
| 3 | ||
| 4953447 | RS Pro | COMBINATION WRENCH CHROME VANADIUM STEEL 0.39" (10MM) SIZE 6.34" LENGTH |
| 3 | ||
| XT2NU3100FFF000XXX (1SDA074953R1) | ABB Low Voltage Products and Systems | XT2 125A FRAME 3P W/ELECTRONIC LSI TRIP UNIT 25K -480V W/O LUGS 100 AMP |
| 2 | ||
| 149535 | Gems Sensors & Controls | CONTROLLER; SPDT; 5A;115VAC; 1/4-IN. MALE SPADE TERM.; LED INDICATORS; NEMA 4X |
| 1 | ||
| 4953784 | RS Pro | OPEN ENDED WRENCH 0.24 X 0.28(6 X 7MM) DOUBLE ENDED CHROME VANADIUM STEEL |
| 1 | ||
| ZB2BY4953 | Schneider Electric | LEGEND, 30 X 40 MM, WHITE, RAISE, SLOW-FAST |
| 1 | ||
| 658-2495-303F | Dialight | INDICATOR, PANEL MOUNT, DOME, RED/GREEN/YELLOW, 8-30VDC, 658 SERIES |
| 1 | ||
| 4953 | Adafruit Industries | KAILH MECHANICAL KEY SWITCHES - LINEAR BLACK - 10 PACK - MX BLACK COMPATIBLE |
| 0 | ||
| 4953 | Keystone Electronics Corp | PC LOOP TEST POINT;THRU-HOLE;BRASS RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | TLE4953CHAMA3 | Infineon Technologies AG | TLE4953C - SPEED & CURRENT SENSORS RoHS : Compliant |
| 1,252 | |
| TLE4953C | Infineon Technologies AG | Hall Effect Sensor, -500mT Min, 500mT Max, Rectangular, 2 Pin, Through Hole Mount RoHS : Compliant |
| 22 | ||
| TLE4953 | Infineon Technologies AG | Hall Effect Sensor, -500mT Min, 500mT Max, Rectangular, 2 Pin, Through Hole Mount RoHS : Compliant |
| 8,018 | ||
| TLE4953CNBAMA1 | Infineon Technologies AG | Hall Effect Sensor RoHS : Compliant |
| 55,500 | ||
| TLE4953E0184HALA1 | Infineon Technologies AG | TLE4953 E0184 - SPEED & CURRENT SENSORS RoHS : Compliant |
| 597 | ||
| TLE4953CBAMA1 | Infineon Technologies AG | Hall Effect Sensor, -500mT Min, 500mT Max, Rectangular, 2 Pin, Through Hole Mount RoHS : Compliant |
| 428 | ||
| TLE4953HALA1 | Infineon Technologies AG | Hall Effect Sensor, -500mT Min, 500mT Max, Rectangular, 2 Pin, Through Hole Mount RoHS : Compliant |
| 1,395 | ||
| LM4953SD/NOPB | Texas Instruments | Audio Amplifier, 1 Channel(s), 1 Func, PDSO14 RoHS : Compliant |
| 7,000 | ||
SI4953DY![]() | Fairchild Semiconductor Corporation | Power Field-Effect Transistor, 4.9A I(D), 30V, 0.053ohm, 2-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant |
| 2,500 | ||
| LM4953SDX/NOPB | National Semiconductor Corporation | Audio Amplifier, 1 Func, PDSO14 RoHS : Compliant |
| 4,500 | ||
![]() Sager | 4953 | Keystone Electronics Corp | Test Plugs & Test Jacks PCB TEST POINT .512 RoHS : Compliant |
| 0 | |
| 2842495-3 | TE Connectivity | 2X3P TB HDR VT (180) W/ FLG 3.5, BK RoHS : Compliant |
| 0 | ||
| 2-84953-7 | TE Connectivity | FFC & FPC Connectors 1MM FPC HORZ.TOP CONT. ASSY 27P RoHS : Compliant |
| 0 | ||
| 4953A25 | Honeywell Sensing and Control / MICRO SWITCH | Speed Sensors | 0 | |||
| 82495-3672 | OMRON Electronic Components | DIP Switches / SIP Switches UM5-3672-SC1 | 0 | |||
| MTMS-149-53-S-S-230 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DWM-49-53-G-S-250 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| MTMS-149-53-G-S-230 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 84953-5 | TE Connectivity | FFC & FPC Connectors 5P 1MM FPC Horz. Top Cont. Assy RoHS : Compliant |
| 0 | ||
| 0764953107 | Molex | High Speed / Modular Connectors Impact 4X10 GL Open RAM Assy 4.90 0.39 RoHS : Compliant |
| 0 | ||
| A495312 | Eaton Bussmann | Barrier Terminal Blocks DISCONNECT BLOCK |
| 0 | ||
| MTMS-149-53-G-D-230 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| RCV-00104953 | Carling Technologies | Rocker Switches VVGACBC-1H5 | 0 | |||
| 4953(3.25LBS.KIT)NOAIRG | BOYD Laconia | Aavid, Thermal Division of Boyd Corporation | 0 | |||
| AA1-B0-26-495-3B2-C | Carling Technologies | Circuit Breakers AA1B0264953B2C RoHS : Compliant | 0 | |||
![]() ComSIT USA | 11749531 | TE Connectivity | AVAILABLE EU | 3,944 | ||
![]() ComSIT USA | 3849530 | TE Connectivity | 1.0 MM, FPC CONNECTOR RIGHT ANGLE, SMT, TOP CONTACT FFC/FPC Connector, 30 Contact(s), 1 Row(s), Female, Right Angle, 0.039 inch Pitch, Surface Mount Terminal, Locking, Natural Insulator RoHS : Not Compliant | 2,400 | ||
FDS4953![]() | Fairchild Semiconductor Corporation | DUAL 30V P-CHANNEL POWERTRENCH MOSFET Power Field-Effect Transistor, 5A I(D), 30V, 0.055ohm, 2-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 525 | |||
| A4953ELJTRT | Evergreen/Vinnic | FULL-BRIDGE DMOS PWM MOTOR DRIVER Brush DC Motor Controller, 2A, DMOS, PDSO8 RoHS : Compliant | 134 | |||
| AP4953GMHF | apec | Electronic Component RoHS : Not Compliant | 30 | |||
| TGA4953SL | TriQuint Semiconductor | 9.9-12.5 GIGABITS/SECOND OPTICAL MODULATOR DRIVER Telecom Circuit, 1-Func, PBGA27 RoHS : Compliant | 3 | |||
![]() Interstate Connecting Components | M85049/53-16A | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Tie Wrap |
| 9 | |
| M85049/53-24A | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant |
| 1 | ||
| 2842495-3 | TE Connectivity | 2X3P TB HDR VT (180) W/ FLG RoHS : Compliant | 0 | |||
| 2-84953-7 | TE Connectivity | 1MM FPC HORZ.TOP CONT.ASSY 27P RoHS : Compliant |
| 0 | ||
| M85049/53-10N | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 0 | ||
| M85049/53-10N | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Tie Wrap |
| 0 | ||
| A850495324X | Amphenol PCD | M8504953-24X | 0 | |||
| M85049/53-24A | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Tie Wrap |
| 0 | ||
| 88-637495-35S | Amphenol Aerospace | 38999 SER 1 CON JT 55C 55#22D SKT RECP | 0 | |||
| 84953-5 | TE Connectivity | 1MM FPC HORZ.TOP CONT.ASSY 5P RoHS : Compliant |
| 0 | ||
| A850495320X | Amphenol PCD | M8504953-20X | 0 | |||
| M85049/53-20W | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Tie Wrap |
| 0 | ||
| M85049/53-20W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 0 | ||
| M85049/53-16A | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant |
| 0 | ||
| M85049/53-20Z | Amphenol PCD | M8504953-20Z | 0 | |||
![]() PEI Genesis | M85049/53-10N | SOURIAU-SUNBANK |
| 0 | ||
| M85049/53-10N | Amphenol PCD |
| 0 | |||
| S85049/53-16W-212 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/53-24A | SOURIAU-SUNBANK |
| 0 | |||
| M85049/53-24A | Amphenol PCD |
| 0 | |||
| 88-637495-35S | Amphenol Corporation |
| 0 | |||
| M85049/53-20W | Amphenol PCD |
| 0 | |||
| M85049/53-20W | SOURIAU-SUNBANK |
| 0 | |||
| M85049/53-16A | Amphenol PCD |
| 0 | |||
| M85049/53-16A | SOURIAU-SUNBANK |
| 0 | |||
| M85049/53-20Z | Amphenol PCD |
| 0 | |||
| M85049/53-22N | Amphenol PCD |
| 0 | |||
| M85049/53-22N | SOURIAU-SUNBANK |
| 0 | |||
| M85049/53-03W | SOURIAU-SUNBANK |
| 0 | |||
| S4953C2203S2L34 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 2-84953-4 | TE Connectivity | FFC / FPC RoHS : Compliant |
| 11,550 | |
| 1-84953-3 | TE Connectivity | FFC / FPC RoHS : Compliant |
| 8,712 | ||
| 1-794953-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 8,482 | ||
| 84953-5 | TE Connectivity | FFC / FPC RoHS : Compliant |
| 3,960 | ||
| 794953-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 3,041 | ||
| 2-84953-7 | TE Connectivity | FFC / FPC RoHS : Compliant |
| 1,584 | ||
| 2-794953-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1,387 | ||
| 1-84953-0 | TE Connectivity | FFC / FPC RoHS : Compliant |
| 944 | ||
| 2-794953-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 589 | ||
| 2-794953-0 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 124 | ||
| 2-2338495-3 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 32 | ||
| M85049/53-10N | Glenair Inc | QWIK-TY STRAIN RELIEF RoHS : Not Compliant |
| 4 | ||
| M85049/53-20W | Amphenol PCD | Quick Clamp |
| 2 | ||
| 690495-3 | TE Connectivity | Tools RoHS : Compliant |
| 2 | ||
| M85049/53-16W | Glenair Inc | QWIK-TY STRAIN RELIEF RoHS : Not Compliant |
| 1 | ||
![]() Chip 1 Exchange | 84953-6 | TE Connectivity | INSTOCK RoHS : Compliant | 147,171 | ||
| 2-84953-0 | TE Connectivity | INSTOCK RoHS : Compliant | 87,288 | |||
| 5-330495-3 | TE Connectivity | INSTOCK RoHS : Compliant | 78,000 | |||
| 2-84953-4 | TE Connectivity | INSTOCK RoHS : Compliant | 22,750 | |||
| 1-84953-3 | TE Connectivity | INSTOCK RoHS : Compliant | 14,040 | |||
| 1-84953-6 | TE Connectivity | INSTOCK RoHS : Compliant | 14,040 | |||
| 2-84953-7 | TE Connectivity | INSTOCK RoHS : Compliant | 12,378 | |||
| MBB/SMA0207-50-1%-RBN4953K | INSTOCK | 12,000 | ||||
| 0-0926495-3 | INSTOCK | 8,017 | ||||
| 1495352-1 | TE Connectivity | INSTOCK | 6,432 | |||
| 794953-4 | INSTOCK | 6,000 | ||||
| SM049532M2030F | INSTOCK | 1,000 | ||||
FDS4953![]() | Fairchild Semiconductor Corporation | INSTOCK RoHS : Compliant | 993 | |||
| 1849532 | INSTOCK | 90 | ||||
| FDS4953 | INSTOCK | 7 | ||||
![]() Avnet Abacus | 1-84953-0 | TE Connectivity | FFC FPC Board Connector 1 mm 10 Contacts Plug Surface Mount Straight Top - Tape and Reel (Alt: 1-84953-0) RoHS : Compliant | 34,500 | ||
| 84953-6 | TE Connectivity | FFC FPC Board Connector 1 mm 6 Contacts Receptacle FPC Surface Mount Top (Alt: 84953-6) RoHS : Compliant | 15,000 | |||
| 84953-4 | TE Connectivity | FFC FPC Board Connector 1 mm 4 Contacts Receptacle Surface Mount Top (Alt: 84953-4) RoHS : Compliant | 15,000 | |||
| 1-84953-2 | TE Connectivity | FFC FPC Board Connector 1 mm 12 Contacts Receptacle FPC Surface Mount Top - Tape and Reel (Alt: 1-84953-2) RoHS : Compliant | 6,000 | |||
| 84953-6 | TE Connectivity | FFC FPC Board Connector 1 mm 6 Contacts Receptacle FPC Surface Mount Top (Alt: 84953-6) RoHS : Compliant | 4,500 | |||
| 1-84953-8 | TE Connectivity | Conn FPC Connector SKT 18 POS 1mm Solder RA SMD TR (Alt: 1-84953-8) RoHS : Compliant | 3,600 | |||
| 84953-4 | TE Connectivity | FFC FPC Board Connector 1 mm 4 Contacts Receptacle Surface Mount Top (Alt: 84953-4) RoHS : Compliant | 1,500 | |||
| 1-84953-2 | TE Connectivity | FFC FPC Board Connector 1 mm 12 Contacts Receptacle FPC Surface Mount Top - Tape and Reel (Alt: 1-84953-2) RoHS : Compliant | 1,200 | |||
| 84953-5 | TE Connectivity | FFCFPC Connector Socket 5 Position 1 mm Solder Right Angle Surface Mount TR (Alt: 84953-5) RoHS : Compliant | 0 | |||
| 2842495-3 | TE Connectivity | 2x3P TB HDR VT 180 w Flg 35 BK (Alt: 2842495-3) RoHS : Compliant | 0 | |||
| 2-84953-7 | TE Connectivity | Conn FPC Connector SKT 27 POS 1mm Solder RA SMD TR (Alt: 2-84953-7) RoHS : Compliant | 0 | |||
| H4953RDYA | TE Connectivity | Resistor 953 Ohm 05 500 mW Axial Leaded Metal Film Precision (Alt: 9-1879633-6) RoHS : Compliant | 0 | |||
| 2495380000 | Weidmüller Interface GmbH & Co. KG | (Alt: 2495380000) RoHS : Not Compliant | 0 | |||
| M85049/53-10N | Glenair Inc | (Alt: M85049/53-10N) RoHS : Compliant | 0 | |||
| M85049/53-24A | Glenair Inc | (Alt: M85049/53-24A) RoHS : Compliant | 0 | |||
![]() Avnet Asia | JDS-LT13BE4953 | Qnity Laird | DSTRHOL,ECE081,PSA (Alt: JDS-LT13BE4953) RoHS : Compliant | 0 | ||
![]() Avnet Silica | L4953G | STMicroelectronics | Standard Regulator Pos 92V5V5V 05A1A01A 15Pin15Tab MULTIWATT V Tube (Alt: L4953G) RoHS : Compliant | 0 | ||
| CRD49530-USB | Cirrus Logic | Development Kit For CS4953xx Audio DSP (Alt: CRD49530-USB) RoHS : Not Compliant | 0 | |||
CS495314-CVZR![]() | Cirrus Logic | (Alt: CS495314-CVZR) RoHS : Compliant | 0 | |||
CS495303-CVZR![]() | Cirrus Logic | Audio Decoder 128Pin LQFP TR (Alt: CS495303-CVZR) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 1-330495-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 14,000 | |
| 495-351-20250 | Amphenol Corporation | IN STOCK SHIP TODAY | 13 | |||
| 495-351-50250 | Amphenol Corporation | IN STOCK SHIP TODAY | 8 | |||
| 495-351-30050 | Amphenol Corporation | IN STOCK SHIP TODAY | 7 | |||
| ERC-55-104-95.3K-1%-T-2 | Vishay Dale | IN STOCK SHIP TODAY |
| 6 | ||
| 595-4953-01 | Sun Microsystems Inc | IN STOCK SHIP TODAY | 1 | |||
| 495-351-50150 | Amphenol Corporation | IN STOCK SHIP TODAY | 1 | |||
| 495-351-20050 | Amphenol Corporation | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | SPL49532 | Spiralock | #10-32 SPL HI LIMIT PD GAGE |
| 13 | |
| SPL49530 | Spiralock | #10-32 SPL GO GAGE Standard Gage |
| 4 | ||
| SPL49531 | Spiralock | #10-32 SPL GO HANDLE Standard Gage |
| 4 | ||
| SPL49532-223453 | Spiralock | 2 | ||||
| SPL49533-223453 | Spiralock | 2 | ||||
| 49538 | Pop Rivets | FAM400-284 | 0 | |||
| 49535 | Pop Rivets | DPM400-366 | 0 | |||
| 49534 | Pop Rivets | FAM400-365 | 0 | |||
| 14953 | Heyco | BRASS CGHT PG29-275X8MMTHD | 0 | |||
| SPL49533 | Spiralock | #10-32 SPL Hi Limit Ramp Gage Standard Gage | 0 | |||
| 49539 | Pop Rivets | FAM400-285 | 0 | |||
| 52-49-53-4-000 | Southco | Captive fastening in tight spaces is no problem with the reduced footprint of these Miniature Series captive screws. Combination tool-head recesses and knurled screw options provide lots of versatility for fastening/unfastening by hand or with tools. | 0 | |||
| 52-49-53-4 | Southco | Captive fastening in tight spaces is no problem with the reduced footprint of these Miniature Series captive screws. Combination tool-head recesses and knurled screw options provide lots of versatility for fastening/unfastening by hand or with tools. | 0 | |||
| SPL49538 | Spiralock | #10-32 SPL Gage Set | 0 | |||
| 49536 | Pop Rivets | DPM400-363 | 0 | |||
![]() EBV Elektronik | TLE4953E0184HALA1 | Infineon Technologies AG | Hall Effect Sensor (Alt: SP000844996) RoHS : Compliant | 16,000 | ||
| TLE4953CHAMA3 | Infineon Technologies AG | Hall Effect Sensor SSO 2 Pins 45 V 20 V 10 C (Alt: SP001952920) RoHS : Compliant | 0 | |||
![]() Maritex | 84953-5 | TE Connectivity | FFC/FPC Connectors; 84953-5; TE CONNECTIVITY; 1 A; Yes; 5; 1 RoHS : Compliant |
| 1,500 | |
| CJQ4953 | Changjiang Electronics Tech (CJ) | Transistor: 2XP-MOSFET; unipolar; -30V; -5A; 1.25W;-55+150 deg.C; SMD; SOP8 |
| 500 | ||
| 1-84953-0 | TE Connectivity | FFC/FPC Connectors; 1-84953-0; TE CONNECTIVITY; Tin; Right Angle; 1 A; Surface Mount RoHS : Compliant |
| 160 | ||
| 84953-4 | TE Connectivity | FFC/FPC Connectors; 84953-4; TE CONNECTIVITY; 1 A; Yes; 4; 1 RoHS : Compliant |
| 4 | ||
![]() Master Electronics | 84953-5 | TE Connectivity | 1MM FPC HORZ.TOP CONT.ASSY 5P RoHS : Compliant |
| 18,645 | |
| 2495380000 | Weidmüller Interface GmbH & Co. KG | Fastening Element for maxGUARD Electronic Load Monitor RoHS : Compliant |
| 229 | ||
| 2842495-3 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2-84953-7 | TE Connectivity | 1MM FPC HORZ.TOP CONT.ASSY 27P RoHS : Compliant |
| 0 | ||
| FFSD-25-D-49.53-01-N-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| H4953RDYA | TE Connectivity | H4 953R 0.5% 15PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| HDWM-49-53-S-S-250 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 658-2495-303F | Dialight | 658 LED PMI 1 DOME RGY 10-30VDC RoHS : Not Compliant |
| 0 | ||
| HDWM-49-53-G-S-250 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMS-149-53-S-S-230 | Samtec Inc | .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| DWM-49-53-G-S-250 | Samtec Inc | .050 x .100 Flex Stack Flexible Micro Board Stacker RoHS : Compliant |
| 0 | ||
| MTMS-149-53-G-S-230 | Samtec Inc | .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| A850495312W | Amphenol PCD | Backshell - Tie Wrap - Cadmium RoHS : Compliant |
| 0 | ||
| DWM-49-53-L-S-275 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMS-149-53-G-D-230 | Samtec Inc | .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W01495-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to TNC Male Low Loss Cable 36 Inch Length Using LMR-240 Coax., Radio frequency assembly SMA male to TNC male low loss cable 36 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 36 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W01495-36 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W01495-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01495-36 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male low loss cable 36 inch length using LMR-240 coax. |
| 4,213 | |
| PE4953 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: C, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Interface Type 1: RG174, Interface Type 2: RG316, Interface Type 3: RG188. C Male Connector Clamp/Solder Attachment for RG174, RG316, RG188. PE4953 type C male coaxial connector has an interface type of RG174, RG316, RG188 and a 50 Ohm impedance. Pasternack type C male connector uses shield/contact clamp/solder as an attachment method. The Pasternack type C coaxial connector has a brass body with nickel plating. This type C male coaxial RF connector is REACH compliant. This Pasternack male C type connector will ship the same day as purchased. Our type C male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom type C connector cable assemblies that will ship the same day as well. |
| 320 | ||
| PE3C4953 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to Snap-On BMA Jack Cable Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to snap-on BMA jack cable using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to snap-on BMA jack cable using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4953, can also be known as a BMA male to BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4953 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4953 can also be used in the other direction and will be BMA jack to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to snap-on BMA jack cable using RG400 coax. | 90 | |||
| PE3C4953-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Plug Bulkhead to Snap-On BMA Jack Cable 12 Inch Length Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to snap-on BMA jack cable 12 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to snap-on BMA jack cable 12 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4953-12, can also be known as a BMA male to BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4953-12 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4953-12 can also be used in the other direction and will be BMA jack to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to snap-on BMA jack cable 12 inch length using RG400 coax. |
| 18 | ||
| PE3C4953-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Plug Bulkhead to Snap-On BMA Jack Cable 60 Inch Length Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to snap-on BMA jack cable 60 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to snap-on BMA jack cable 60 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4953-60, can also be known as a BMA male to BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4953-60 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4953-60 can also be used in the other direction and will be BMA jack to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to snap-on BMA jack cable 60 inch length using RG400 coax. |
| 18 | ||
| PE3C4953-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 36 inches. Slide-On BMA Plug Bulkhead to Snap-On BMA Jack Cable 36 Inch Length Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to snap-on BMA jack cable 36 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to snap-on BMA jack cable 36 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4953-36, can also be known as a BMA male to BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4953-36 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4953-36 can also be used in the other direction and will be BMA jack to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to snap-on BMA jack cable 36 inch length using RG400 coax. |
| 18 | ||
| PE3C4953-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 6 inches. Slide-On BMA Plug Bulkhead to Snap-On BMA Jack Cable 6 Inch Length Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to snap-on BMA jack cable 6 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to snap-on BMA jack cable 6 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4953-6, can also be known as a BMA male to BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4953-6 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4953-6 can also be used in the other direction and will be BMA jack to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to snap-on BMA jack cable 6 inch length using RG400 coax. |
| 18 | ||
| PE3C9495-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. SHV Jack to SHV Jack Cable 36 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly SHV jack to SHV jack cable 36 inch length using 75 Ohm RG59 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack to SHV jack cable 36 inch length using 75 Ohm RG59 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SHV cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9495-36 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9495-36 is built with RG59 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency SHV jack to SHV jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female to SHV female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack to SHV jack cable 36 inch length using 75 Ohm RG59 coax. |
| 11 | ||
| PE44953 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: SMP, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: Thread-In, Interface Type 1: Hermetic Seal Pins. SMP Male Limited Detent Shroud Thread-In Mount. PE44953 SMP male thread-in shroud limited detent connector has an interface type of SMP male, which is compatible with hermetic seal pins cables, and has an impedance of 50 Ohms. Pasternack’s SMP male thread-in connector uses solder as an attachment method. This SMP male RF connector is stocked to be readily available for same business day shipment and can also be designed onto custom cable configurations using our online cable creator. Pasternack’s SMP shroud connector has a passivated stainless steel body. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. Our high-quality PE44953 RF connector features a QQ-P-35 body plating specification. Our SMP male connector has a length of 0.16 inches, a width of 0.12 inches, and a weight of 0.003 lbs. This Pasternack male SMP thread-in connector will ship the same business day as purchased. Our thread-in SMP male shroud connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. |
| 5 | ||
| PE3W24953 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to MMCX Jack Cable Using PE-SR405FLJ Coax. PE3W24953 is a SMA female bulkhead to MMCX jack cable using PE-SR405FLJ coax. This Pasternack SMA female bulkhead to MMCX jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. Our female SMA bulkhead to jack MMCX cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W24953 SMA female bulkhead to MMCX jack cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE38495-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Female to QN Male Right Angle Cable 36 Inch Length Using RG213 Coax., Radio frequency assembly N female to QN male right angle cable 36 inch length using RG213 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female to QN male right angle cable 36 inch length using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle QN cable connection on the other. Our N type to right angle QN cable assemblies have a female gender on end 1 and male on end 2. This type N to QN cable is a female to male coax assembly, PE38495-36, can also be known as a type N jack to right angle QN plug cable assembly and will be shipped same-day as it is purchased. N type jack to QN plug cable assembly PE38495-36 is built with RG213 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle QN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N female to QN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38495-36 can also be used in the other direction and will be right angle QN male to N type female cable assembly if the opposite connectivity is required. Type N jack to QN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to QN cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to QN male right angle cable 36 inch length using RG213 coax. |
| 0 | ||
| PE3495-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 36 inches. BNC Male to BNC Male Cable 36 Inch Length Using RG142 Coax., Radio frequency assembly BNC male to BNC male cable 36 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 36 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3495-36, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3495-36 is built with RG142 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 36 inch length using RG142 coax. | 0 | |||
| PE3C3495-36 | Pasternack Enterprises |
| 0 | |||
| PE3W04953/BK/HS | Pasternack Enterprises | 0 | ||||
| PE3W03495-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Clamped TNC Male to TNC Male Low Loss Cable 36 Inch Length Using LMR-400 Coax., Radio frequency assembly clamped TNC male to TNC male low loss cable 36 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Clamped TNC male to TNC male low loss cable 36 inch length using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W03495-36 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W03495-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped TNC male to TNC male low loss cable 36 inch length using LMR-400 coax. |
| 0 | ||
![]() Vyrian | A495303 | Eaton Corporation | Barrier Strip Terminal Block, 50A, 1 Row(s), 1 Deck(s) | 12,895 | ||
| ADIS16495-3BMLZ | Analog Devices Inc | Analog Circuit, 1 Func, Hybrid RoHS : Compliant | 12,282 | |||
| 1-2338495-3 | TE Connectivity | Connector Accessory RoHS : Compliant | 11,882 | |||
| 2-84953-3 | TE Connectivity | FFC/FPC Connector, 23 Contact(s), 1 Row(s), Female, Right Angle, 0.039 inch Pitch, Surface Mount Terminal, Locking, Natural Insulator RoHS : Compliant | 11,239 | |||
| 1754953 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,371 | |||
| L4953G | STMicroelectronics | Fixed Positive Standard Regulator, 4 Output, 9.2V1, 5V2, PZFM15 RoHS : Compliant | 9,273 | |||
| TLE4953CBAMA1 | Infineon Technologies AG | Hall Effect Sensor, -500mT Min, 500mT Max, Rectangular, Through Hole Mount RoHS : Compliant | 8,421 | |||
| LM4953SD-N | Texas Instruments | Audio Amplifier, 1 Func, PDSO14 RoHS : Not Compliant | 8,197 | |||
| 554953-1 | TE Connectivity | Telecom and Datacom Connector, 50 Contact(s), Male, IDC Terminal, Plug RoHS : Compliant | 7,050 | |||
| LM4953SDBD | Texas Instruments | 6,587 | ||||
| LM4953SDBD-NOPB | Texas Instruments | 4,424 | ||||
LM4953SD![]() | Texas Instruments | Audio Amplifier, 1 Channel(s), 1 Func RoHS : Not Compliant | 4,111 | |||
LM4953SDX![]() | Texas Instruments | Audio Amplifier, 1 Channel(s), 1 Func RoHS : Not Compliant | 3,984 | |||
| 926495-3 | TE Connectivity | Connector Accessory, Keying Item, Glass Filled Polycarbonate RoHS : Compliant | 883 | |||
| 2904953 | Phoenix Contact | Special Relay RoHS : Compliant | 437 | |||
![]() Win Source Electronics | APM4953KC-TRG | Anpec Electronics Corporation |
| 58,888 | ||
A4953ELJTR-T![]() | Allegro MicroSystems LLC | IC MOTOR DRIVER PAR 8SOIC RoHS : Compliant |
| 29,290 | ||
| APM4953 | Nexperia | SOP-8 MOSFETS ROHS |
| 25,000 | ||
| MGF4953A | Mitsubishi Electric | SUPER LOW NOISE InGaAs HEMT (Leadless Ceramic Package) RoHS : Compliant |
| 3,100 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |