502-39QCL-R Price, 販売店, Stock

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 24 inches. Reverse Polarity SMA Male to Reverse Polarity SMA Male Cable 24 Inch Length Using RG142 Coax., Radio frequency assembly reverse polarity SMA male to reverse polarity SMA male cable 24 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA male to reverse polarity SMA male cable 24 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to reverse polarity SMA cable is a male to male coax assembly, PE34750-24, can also be known as a reverse polarity SMA plug to reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to reverse polarity SMA plug cable assembly PE34750-24 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA male to reverse polarity SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA reverse polarity plug to SMA reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to reverse polarity SMA male cable 24 inch length using RG142 coax.

1 : $102.99
25 : $97.84
50 : $92.69
100 : $88.57

1,146

PE3FCA502-10M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: FC, Connector 1 Polish Type: UPC, Connector 2 Series: FC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex FC UPC, NK to FC UPC, NK, SM OS2, 2.0mm Plenum, Yellow-10M. Pasternack’s PE3FCA502-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long duplex cable assembly is equipped with FC/UPC narrow key to FC/UPC narrow key connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA502-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA502-10M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual FC/UPC to dual FC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $38.39
5 : $36.85
10 : $35.32
25 : $33.78

PE3C8502-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Outdoor Rated 7/16 DIN Male to N Female Low PIM Cable 100 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N female low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N female low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low PIM 7/16 DIN to N type cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to type N cable is a male to female coax assembly, PE3C8502-100CM, can also be known as a low PIM 7/16 DIN plug to N type jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N jack cable assembly PE3C8502-100CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8502-100CM can also be used in the other direction and will be N type female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N female low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts.

1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9

PE38502-12

Pasternack Enterprises

Key Specifications, Connector Series 1: UMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 12 inches. UMCX Plug to MCX Plug Right Angle Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly UMCX plug to MCX plug right angle cable 12 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UMCX plug to MCX plug right angle cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UMCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle UMCX cable connection on one end and right angle MCX cable connection on the other. Our right angle UMCX to right angle MCX cable assemblies have a plug gender on end 1 and plug on end 2. This UMCX to MCX cable is a plug to plug coax assembly, PE38502-12, can also be known as a right angle UMCX male to right angle MCX male cable assembly and will be shipped same-day as it is purchased. UMCX male to MCX male cable assembly PE38502-12 is built with RG178 which is a flexible coax type. The Pasternack flexible UMCX cable assembly is manufactured with right angle UMCX to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this UMCX right angle plug to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38502-12 can also be used in the other direction and will be right angle MCX plug to right angle UMCX plug cable assembly if the opposite connectivity is required. UMCX right angle male to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UMCX to MCX cable assembly for quick shipment worldwide. Variations of UMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UMCX plug to MCX plug right angle cable 12 inch length using RG178 coax.

1 : $70.69
25 : $67.16
50 : $63.62
100 : $60.79

PE3C9502-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated, Length, Max: 24 inches. SHV Jack to SHV Jack Bulkhead Cable 24 Inch Length Using RG142 Coax., Radio frequency assembly SHV jack to SHV jack bulkhead cable 24 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack to SHV jack bulkhead cable 24 inch length using RG142 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9502-24 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9502-24 is built with RG142 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency SHV jack to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9502-24 can also be used in the other direction and will be SHV jack bulkhead to SHV jack cable assembly if the opposite connectivity is required. SHV female to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack to SHV jack bulkhead cable 24 inch length using RG142 coax.

1 : $162.99
25 : $154.84
50 : $146.69
100 : $140.17

PE71S5020

Pasternack Enterprises

Key Specifications, Connector Series: N, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 1 GHz, Maximum Frequency: 2 GHz, Impedance: 50 Ohm, Maximum Input VSWR: 1.8:1, Maximum Insertion Loss: 1 dB. Reflective SPDT PIN Diode Switch Operating From 1 GHz to 2 GHz Up to 70 Watt (+48.45 dBm) and Field Replaceable N-Type with Heatsink. The PE71S5020 PIN diode switch from Pasternack has a reflective design with a SPDT switch configuration. Our RF reflective PIN diode switch uses N-type connectors at 50 Ohm impedance. This N-type PIN diode reflective switch has a minimum frequency of 1 GHz and a maximum frequency of 2 GHz. Make your online purchase right now to take advantage of our same-business-day shipping. This reflective SPDT radio frequency PIN diode switch has a female gender configuration and is designed to withstand a series of environmental test conditions including altitude, vibration, shock and humidity. Our PE71S5020 PIN diode switch has a nickel-plated copper body. This PIN diode switch is rated at a 5 Vdc voltage. Our wideband RF PIN diode switch operates within a temperature range of -40 deg C to 85 deg C. This 50 Ohm SPDT PIN diode switch has a 1.8:1 maximum VSWR (Voltage Standing Wave Ratio). The maximum insertion loss of this N-type reflective switch is 1 dB with a typical isolation of 35 dB. Additional specifications for this wideband SPDT PIN diode switch can be found on its PDF specification datasheet and CAD drawings. The reflective PIN diode radio frequency switch PE71S5020 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our reflective N-type coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect wideband RF PIN diode switch for your requirement.

1 : $5,920.0
5 : $5,683.2
10 : $5,446.4
25 : $5,209.6

PE3M0350-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 12, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. MIL Size 12 D38999 Contact Socket to SMA Female Cable 24 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0350-24 from Pasternack is a D38999 contact cable assembly that is built with a size 12 M39029 socket contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. The PE3M0350-24 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0350-24 between-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. M39029 socket to SMA female cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0350-24 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to SMA RF cable are available on our downloadable PDF datasheet. M39029 socket to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to SMA RF cable assembly as per your requirements.

1 : $130.99
10 : $125.75
25 : $120.51
100 : $115.27

PE3W05020LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. BNC Female 4 Hole Flange to BNC Male Cable Using RG316-DS Coax with HeatShrink, LF Solder. PE3W05020LF/HS is a BNC female 4 hole flange to BNC male cable using RG316-DS coax. This Pasternack BNC female 4 hole flange to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC 4 hole flange to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05020LF/HS BNC female 4 hole flange to BNC male cable assembly is constructed with RG316-DS coax.

PE33502

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable Using RG402 Coax. PE33502 is a SMA female 4 hole flange to SMA female 4 hole flange cable using RG402 coax. This Pasternack SMA female 4 hole flange to SMA female 4 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA 4 hole flange to female SMA 4 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE33502 SMA female 4 hole flange to SMA female 4 hole flange cable assembly is constructed with RG402 coax and the maximum VSWR is 1.4:1.

PE35029LF

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to BNC Female Bulkhead Cable Using RG316-DS Coax, LF Solder. PE35029LF is a BNC female bulkhead to BNC female bulkhead cable using RG316-DS coax. This Pasternack BNC female bulkhead to BNC female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC bulkhead to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35029LF BNC female bulkhead to BNC female bulkhead cable assembly is constructed with RG316-DS coax.

PE3W05029LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to Reverse Polarity SMA Female Bulkhead Cable Using LMR-195 Coax, LF Solder. PE3W05029LF is a reverse polarity SMA male right angle to reverse polarity SMA female bulkhead cable using LMR-195 coax. This Pasternack reverse polarity SMA male right angle to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05029LF SMA reverse polarity male right angle to SMA reverse polarity female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W14502/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-FR, RF Cable Type: LMR-400-FR, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-400-FR Coax with HeatShrink. PE3W14502/HS is a TNC male to TNC male cable using LMR-400-FR coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14502/HS TNC male to TNC male cable assembly is constructed with LMR-400-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W16550-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMB Jack Bulkhead to MCX Plug Right Angle Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly SMB jack bulkhead to MCX plug right angle low loss cable 24 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to MCX plug right angle low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMB bulkhead cable connection on one end and a right angle MCX cable connection on the other. Our low loss SMB to right angle MCX cable assembly has a jack gender on end 1 and a plug on end 2. PE3W16550-24 can also be known as a low loss SMB female to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16550-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our bulkhead SMB jack to right angle MCX plug cable has a maximum VSWR of 1.4:1. SMB female to MCX male cable assembly PE3W16550-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16550-24 can also be used in the other direction and will be a right angle MCX plug to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to MCX cable assembly for quick shipment worldwide. Variations of SMB and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $75.99
25 : $72.19
50 : $68.39
100 : $65.35

PE3W21502

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMA Male Cable Using PE-P195 Coax. PE3W21502 is a TNC female bulkhead to SMA male cable using PE-P195 coax. This Pasternack TNC female bulkhead to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our female TNC bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21502 TNC female bulkhead to SMA male cable assembly is constructed with PE-P195 coax.

PE3C5020/HS-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male Right Angle to TNC Male Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male right angle to TNC male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our low loss right angle SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C5020/HS-200CM can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5020/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C5020/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5020/HS-200CM can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85

TE Connectivity

55PC0811-20-9CS2502

TE Connectivity

55PC0811-20-9CS2502 Cable Type: Spec 55 Operating Voltage: 600 V Wire & Cable Insulation Material: Modified Radiation Cross-linked ETFE Polymer Conductor Material: Tin-Coated Copper Wire Size: 20 AWG Spec 55 600 V Modified Radiation Cross-linked ETFE Polymer Tin-Coated Copper | Hook Up Wire | Part Number: 55PC0811-20-9CS2502 | Internal Number: 535609-000 | Alias Number: 2-1194205-0 | 20 AWG | TE Connectivity
RoHS : Compliant

1 : $0.5

4,764

3502220KJT

TE Connectivity

3502 220K 5% Resistance Value: 220K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Surface Mount Resistor | 220K Ω Thick Metal Film Power Resistor 5 % | Part Number: 3502220KJT | Internal Number: 3-2176399-6 | TE Connectivity
RoHS : Compliant

2,500 : $0.47
1,000 : $0.48
500 : $0.49
250 : $0.51
100 : $0.52
50 : $0.53
25 : $0.54
10 : $0.56
1 : $0.57

3,845

35026K8JT

TE Connectivity

3502 6K8 5% Resistance Value: 6.8K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Surface Mount Resistor | 6.8K Ω Thick Metal Film Power Resistor 5 % | Part Number: 35026K8JT | Internal Number: 1-2176399-8 | TE Connectivity
RoHS : Compliant

2,500 : $0.47
1,000 : $0.48
500 : $0.49
250 : $0.51
100 : $0.52
50 : $0.53
25 : $0.54
10 : $0.56
1 : $0.57

3,489

3550270KFT

TE Connectivity

3550 270K 1% Resistance Value: 270K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Power Rating: 5 W Surface Mount Resistor | 270K Ω Thick Metal Film Power Resistor 1 % | Part Number: 3550270KFT | Internal Number: 3-2176404-2 | TE Connectivity
RoHS : Compliant

1,000 : $2.03
500 : $2.09
250 : $2.15
100 : $2.21
50 : $2.27
25 : $2.33
10 : $2.4
1 : $2.46

1,920

35022K2JT

TE Connectivity

3502 2K2 5% Resistance Value: 2.2K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Surface Mount Resistor | 2.2K Ω Thick Metal Film Power Resistor 5 % | Part Number: 35022K2JT | Internal Number: 1-2176399-2 | TE Connectivity
RoHS : Compliant

2,500 : $0.47
1,000 : $0.48
500 : $0.49
250 : $0.51
100 : $0.52
50 : $0.53
25 : $0.54
10 : $0.56
1 : $0.57

964

350210RFT

TE Connectivity

3502 10R 1% Resistance Value: 10 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 10 Ω Thick Metal Film Power Resistor 1 % | Part Number: 350210RFT | Internal Number: 2-2176397-5 | TE Connectivity
RoHS : Compliant

2,500 : $0.58
1,000 : $0.6
500 : $0.61
250 : $0.63
100 : $0.65
50 : $0.66
25 : $0.68
10 : $0.69
1 : $0.71

786

RN214-0.5-02-39M

TE Connectivity

RN214-0.5-02-39M Operating Voltage (Max): 300 VDC Current Rating (Max): .5 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC .5 A PCB Terminal PD2 | Part Number: RN214-0.5-02-39M | Internal Number: 816549-SF | TE Connectivity
RoHS : Compliant

10 : $3.74
1 : $4.15

745

B-106-1502-S

TE Connectivity

B-106-1502-S Primary Product Color: Blue Wire Size: 14 – 16 AWG Wire Size: 2.5 – 1.5 mm² Insulation Option: Fully Insulated Sealable: No Blue 14 – 16 AWG 2.5 – 1.5 mm² Fully Insulated | Electrical Wire Splice | Part Number: B-106-1502-S | Internal Number: 157013-000 | Alias Number: 7-1191134-9 | TE Connectivity
RoHS : Compliant

1 : $0.91

695

RN214-0.5-02-56M

TE Connectivity

RN214-0.5-02-56M Operating Voltage (Max): 300 VDC Current Rating (Max): .5 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC .5 A PCB Terminal PD2 | Part Number: RN214-0.5-02-56M | Internal Number: 816550-SF | TE Connectivity
RoHS : Compliant

10 : $3.81
1 : $4.22

474

RN242-0.5-02-82M

TE Connectivity

RN242-0.5-02-82M Operating Voltage (Max): 300 VDC Current Rating (Max): .5 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC .5 A PCB Terminal PD2 | Part Number: RN242-0.5-02-82M | Internal Number: 816575-SF | TE Connectivity
RoHS : Compliant

10 : $7.44
1 : $8.27

259

RN204-1.5-02-1M6

TE Connectivity

RN204-1.5-02-1M6 Operating Voltage (Max): 300 VDC Current Rating (Max): 1.5 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC 1.5 A PCB Terminal PD2 | Part Number: RN204-1.5-02-1M6 | Internal Number: 815787-SF | TE Connectivity
RoHS : Compliant

25 : $4.75
10 : $5.13
1 : $5.49

232

HSA502R2J

TE Connectivity

HSA50 2R2 5% Resistance Value: 2.2 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 2.2 Ω Wire Wound 5 % Power Resistor | Part Number: HSA502R2J | Internal Number: 4-1625984-3 | TE Connectivity
RoHS : Compliant

100 : $7.98
50 : $8.36
25 : $8.74
10 : $9.12
1 : $9.5

226

HSC25022RJ

TE Connectivity

HSC250 22R 5% Resistance Value: 22 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 22 Ω Wire Wound 5 % Power Resistor | Part Number: HSC25022RJ | Internal Number: 2-1630024-6 | TE Connectivity
RoHS : Compliant

10 : $124.84
1 : $138.72

1-2186502-1

TE Connectivity

T3224-PRINTER Printer Media Type: Roll - Single Sided Print Head Resolution: 24 dpmm Print Head Resolution: 600 dpi Roll - Single Sided 24 dpmm 600 dpi | Thermal Label Printer | Part Number: 1-2186502-1 | Internal Number: 1-2186502-1 | TE Connectivity
RoHS : Compliant

1 : $16,207.94

350247RFT

TE Connectivity

3502 47R 1% Resistance Value: 47 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 47 Ω Thick Metal Film Power Resistor 1 % | Part Number: 350247RFT | Internal Number: 4-2176397-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.59
1,000 : $0.61
500 : $0.62
250 : $0.64
100 : $0.66
50 : $0.67
25 : $0.69
10 : $0.7
1 : $0.72

Teledyne HiRel

5962-9215502MYA

Teledyne HiRel

PROM, 32K X 8, REGISTERED, 40 NS ACCESS TIME
RoHS : Not Compliant

5962-87515023A

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-89755023A

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT AND-OR
RoHS : Not Compliant

5962-9215502MXA

Teledyne HiRel

PROM, 32K X 8, REGISTERED, 40 NS ACCESS TIME
RoHS : Not Compliant

5962-9450202QXA

Teledyne HiRel

BUS TRANSCEIVER/REGISTER, 16-BIT, W/3-STATE OUTPUTS, TTL COMPATIBLE INPUTS
RoHS : Not Compliant

5962-90555023A

Teledyne HiRel

PROG. LOGIC DEVICE, ASYNCHRONOUS, 25 NS
RoHS : Not Compliant

5962-9158502MXA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 80 NS ACCESS TIME
RoHS : Not Compliant

5962-9952502QZC

Teledyne HiRel

PROGRAMMABLE LOGIC DEVICE, 512 MACROCELL, ELECTRICALLY ALTERABLE, 100 MHZ

5962-8873502LA

Teledyne HiRel

PROM, ONE TIME, 2K X 8, REGISTERED, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-9055502KA

Teledyne HiRel

PROG. LOGIC DEVICE, ASYNCHRONOUS, 25 NS
RoHS : Not Compliant

5962-9317502QXA

Teledyne HiRel

BUS TRANSCEIVER, 16-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9071502MXA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 80 NS ACCESS TIME
RoHS : Not Compliant

5962-9071502MZA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 80 NS ACCESS TIME
RoHS : Not Compliant

5962-9158502MYA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 80 NS ACCESS TIME
RoHS : Not Compliant

5962-8873502KA

Teledyne HiRel

PROM, ONE TIME, 2K X 8, REGISTERED, 35 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

PHCR5020-105FKB

VENKEL LTD

Precision-High Value CR;5020;1M;�1%;100PPM
RoHS : Compliant

PWCR0603-TK-7502FT

VENKEL LTD

Pulse Withstanding CR;0603;1/4W;�100PPM;75K;�1%
RoHS : Compliant

PWCR1210-WK-7502DT

VENKEL LTD

Pulse Withstanding CR;1210;3/4W;�100PPM;75K;�0.5%
RoHS : Compliant

C1206C0G250-222GNP

VENKEL LTD

Chip Capacitor;1206;C0G;25V;2200pF;�2%
RoHS : Compliant

C1206X7R250-223KNP

VENKEL LTD

Chip Capacitor;1206;X7R;25V;0.022uF;�10%
RoHS : Compliant

AGC0603C0G250-221JNP

VENKEL LTD

Auto Grade Capacitor;0603;C0G;25V;220pF;�5%
RoHS : Compliant

SAFC1812C0G502-680JNE

VENKEL LTD

Safety Cap;1812;C0G;X1/Y2;68pF;�5%
RoHS : Compliant

SAFC2208C0G502-680JNE

VENKEL LTD

Safety Cap;2208;C0G;X1/Y2;68pF;�5%
RoHS : Compliant

SAFC2208X7R502-820KNE

VENKEL LTD

Safety Cap;2208;X7R;X1/Y2;82pF;�10%
RoHS : Compliant

SAFC2220C0G502-820JNE

VENKEL LTD

Safety Cap;2220;C0G;X1/Y2;82pF;�5%
RoHS : Compliant

SAFC2220X7R502-222KNE

VENKEL LTD

Safety Cap;2220;X7R;X1/Y2;2200pF;�10%
RoHS : Compliant

HPTF0603-QN-1502FT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�10PPM;15K;�1%
RoHS : Compliant

HPTF0603-QP-1502BT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;15K;�0.1%
RoHS : Compliant

HPTF0805-RN-7502AT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�10PPM;75K;�0.05%
RoHS : Compliant

HPTF0805-TC-7502BT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�50PPM;75K;�0.1%
RoHS : Compliant

Win Source Electronics

AT25020

Atmel Corporation

SPI Serial EEPROMs

2,495 : $0.1347
2,000 : $0.1402
1,540 : $0.1456
1,075 : $0.1566
695 : $0.1621
325 : $0.173

70,000

AD8502ARJZ-R2

Analog Devices Inc

IC OP AMP GP RRIO 7KHZ SOT23-8
RoHS : Compliant

300 : $1.2936
240 : $1.3476
185 : $1.4015
130 : $1.5093
85 : $1.5631
40 : $1.6708

47,780

DRV5023AJQLPGMQ1

Texas Instruments

MAGNETIC SWITCH UNIPOLAR TO92-3 / Digital Switch Unipolar Switch Open Drain Hall Effect TO-92-3
RoHS : Compliant

1,325 : $0.254
990 : $0.2834
765 : $0.2931
555 : $0.303
360 : $0.3127
150 : $0.381

38,653

502R29W102KV3E-****-SC

Johanson Dielectrics Inc

CAP CER 1000PF 250VAC X7R 1808

1,770 : $0.1695
1,325 : $0.189
1,025 : $0.1956
745 : $0.2021
480 : $0.2086
200 : $0.2542

23,590

FAN5026MTCX

Fairchild Semiconductor Corporation

IC CONTROLLER DDR 28TSSOP
RoHS : Compliant

110 : $3.5529
82 : $3.9628
64 : $4.0994
46 : $4.2362
30 : $4.3728
13 : $5.3294

23,480

MF-SM050-2

Bourns Inc

FUSE RESETTABLE .50A 60V SMD
RoHS : Compliant

2,600 : $0.1155
1,945 : $0.1288
1,505 : $0.1332
1,090 : $0.1377
705 : $0.1421
290 : $0.1732

20,000

LM5020MM-1

Texas Instruments

Current Mode PWM Controller -0.3V to 7V 1A 200kHz/630kHz 10-Pin VSSOP T/R / LM5020 100V Current Mode PWM Controller | IC REG CTRLR FLYBACK 10MSOP
RoHS : Not Compliant

260 : $1.3039
195 : $1.4544
150 : $1.5045
110 : $1.5547
70 : $1.6048
30 : $1.9559

13,000

3314J-1-502E/TS4YJ502

Bourns Inc

805 : $0.419
600 : $0.4674
465 : $0.4835
340 : $0.4996
220 : $0.5156
90 : $0.6284

11,919

RXEF050-2