 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
505-28VM-R1 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 Pasternack Enterprises US | PE3W01505/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Reverse Polarity TNC Male to SMA Male Right Angle Cable 100 cm Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity TNC male to SMA male right angle cable 100 cm length using LMR-240 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity TNC male to SMA male right angle cable 100 cm length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC cable connection on one end and right angle SMA cable connection on the other. Our reverse polarity TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity TNC to SMA cable is a male to male coax assembly, PE3W01505/HS-100CM, can also be known as a reverse polarity TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC plug to SMA plug cable assembly PE3W01505/HS-100CM is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity TNC male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01505/HS-100CM can also be used in the other direction and will be right angle SMA male to reverse polarity TNC male cable assembly if the opposite connectivity is required. TNC reverse polarity plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC male to SMA male right angle cable 100 cm length using LMR-240 coax with heatshrink. |
| 1,015 | |
| PE3C8505-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Outdoor Rated 7/16 DIN Male Right Angle to N Female Low PIM Cable 200 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male right angle to N female low PIM cable 200 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male right angle to N female low PIM cable 200 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 7/16 DIN cable connection on one end and type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to type N cable is a male to female coax assembly, PE3C8505-200CM, can also be known as a low PIM right angle 7/16 DIN plug to N type jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N jack cable assembly PE3C8505-200CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN right angle male to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8505-200CM can also be used in the other direction and will be type N female to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male right angle to N female low PIM cable 200 cm length using SPO-250 coax using Times Microwave parts. |
| 10 | ||
| PE3C2505-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMP Female Right Angle to MMCX Plug Right Angle Cable 48 Inch Length Using RG196 Coax., Radio frequency assembly SMP female right angle to MMCX plug right angle cable 48 inch length using RG196 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to MMCX plug right angle cable 48 inch length using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMP cable connection on one end and a right angle MMCX cable connection on the other. Our right angle SMP to right angle MMCX cable assembly has a female gender on end 1 and a plug on end 2. PE3C2505-48 can also be known as a right angle SMP jack to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3C2505-48 RF cable has a PTFE jacket of 0.080-inch diameter. The flexible RF cable has a between series connection. Our right angle SMP female to right angle MMCX plug cable has a maximum VSWR of 1.4:1. SMP jack to MMCX male cable assembly PE3C2505-48 is built with RG196 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C2505-48 can also be used in the other direction and will be a right angle MMCX plug to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to MMCX cable assembly for quick shipment worldwide. Variations of SMP and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to MMCX RF cable assembly as per your requirements. |
| 0 | ||
| PE3W21505/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. MMCX Plug to MCX Jack Bulkhead Cable Using RG188-DS Coax with HeatShrink. PE3W21505/HS is a MMCX plug to MCX jack bulkhead cable using RG188-DS coax. This Pasternack MMCX plug to MCX jack bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MCX for connector 2. Our plug MMCX to jack MCX bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21505/HS MMCX plug to MCX jack bulkhead cable assembly is constructed with RG188-DS coax. | 0 | |||
| PE3W25051 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using RG316 Coax. PE3W25051 is a SMA male to SMA female bulkhead cable using RG316 coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25051 SMA male to SMA female bulkhead cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W18505 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm. SSMA Female to SMA Male Cable Using PE-SR047FL Coax. PE3W18505 is a SSMA female to SMA male cable using PE-SR047FL coax. This Pasternack SSMA female to SMA male cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SSMA to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W18505 SSMA female to SMA male cable assembly is constructed with PE-SR047FL coax. | 0 | |||
| PE3W25057 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Female to Beige FAKRA Jack Right Angle Cable Using RG174 Coax. PE3W25057 is a SMA female to FAKRA jack right angle cable using RG174 coax. This Pasternack SMA female to FAKRA jack right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm FAKRA for connector 2. SMA to FAKRA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to jack FAKRA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25057 SMA female to FAKRA jack right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3C1505 | Pasternack Enterprises | 0 | ||||
| PE3C7505/BK/HS | Pasternack Enterprises | 0 | ||||
| PE3W05053/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.6/5.6, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm 1.6/5.6 Plug Cable Using 75 Ohm RG59 Coax with HeatShrink., Pasternack’s PE3W05053/BK/HS BNC male to 1.6/5.6 plug RF cable assembly using RG59 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to 1.6/5.6 plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to 1.6/5.6 cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a 1.6/5.6 cable connection on the other. Our BNC to 1.6/5.6 cable assembly has a male gender on end 1 and a plug on end 2. PE3W05053/BK/HS can also be known as a BNC plug to 1.6/5.6 male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PE dielectric type. Our PE3W05053/BK/HS RF cable has a pvc (nc) jacket of 0.242-inch diameter. The flexible RF cable has a between series connection. This PE3W05053/BK/HS BNC plug to 1.6/5.6 male cable assembly is built with RG59, which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.6/5.6 cable connectors, has a 75 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05053/BK/HS can also be used in the other direction and will be a 1.6/5.6 plug to BNC male cable assembly if the opposite connectivity is required. This BNC plug to 1.6/5.6 male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.6/5.6 cable assembly for quick shipment worldwide. Variations of BNC and 1.6/5.6 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to 1.6/5.6 RF cable assembly as per your requirements. | 0 | |||
| PE3W05056-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Push-On SMP Female Right Angle to SMA Male Right Angle Cable 200 cm Length Using RG316 Coax., Radio frequency assembly push-on SMP female right angle to SMA male right angle cable 200 cm length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Push-on SMP female right angle to SMA male right angle cable 200 cm length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMA cable connection on the other. Our right angle SMP to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This SMP to SMA cable is a female to male coax assembly, PE3W05056-200CM, can also be known as a right angle SMP jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA plug cable assembly PE3W05056-200CM is built with RG316 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05056-200CM can also be used in the other direction and will be right angle SMA male to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female right angle to SMA male right angle cable 200 cm length using RG316 coax. |
| 0 | ||
| PE3W05058/BL/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMP Female to TNC Male Cable Using PE-P086HF Coax with HeatShrink., Pasternack’s PE3W05058/BL/HS SMP female to TNC male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMP cable connection on one end and a TNC cable connection on the other. Our SMP to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3W05058/BL/HS can also be known as a SMP jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W05058/BL/HS RF cable has an FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This PE3W05058/BL/HS SMP jack to TNC plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with SMP to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05058/BL/HS can also be used in the other direction and will be a TNC male to SMP female cable assembly if the opposite connectivity is required. This SMP jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to TNC cable assembly for quick shipment worldwide. Variations of SMP and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to TNC RF cable assembly as per your requirements. | 0 | |||
| PE3W25053 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Female to Violet FAKRA Jack Right Angle Cable Using RG174 Coax. PE3W25053 is a SMA female to FAKRA jack right angle cable using RG174 coax. This Pasternack SMA female to FAKRA jack right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm FAKRA for connector 2. SMA to FAKRA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to jack FAKRA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25053 SMA female to FAKRA jack right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3505LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50. BNC Female to BNC Female Cable Using RG316 Coax, RoHS. PE3505LF is a BNC female to BNC female cable using RG316 coax. This Pasternack BNC female to BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3505LF BNC female to BNC female cable assembly is constructed with RG316 coax and the maximum VSWR is 1.4:1. | 0 | |||
| PE3C8050-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. 2.2-5 Male to 4.3-10 Male Low PIM Cable 50 CM Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male to 4.3-10 male low PIM cable 50 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male to 4.3-10 male low PIM cable 50 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 2.2-5 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to 4.3-10 cable is a male to male coax assembly, PE3C8050-50CM, can also be known as a low PIM 2.2-5 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 4.3-10 plug cable assembly PE3C8050-50CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8050-50CM can also be used in the other direction and will be 4.3-10 male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to 4.3-10 male low PIM cable 50 cm length using 1/4 inch superflexible coax. |
| 0 | ||
 Venkel Ltd. | C0402C0G250-5R6DNP | VENKEL LTD | Chip Capacitor;0402;C0G;25V;5.6pF;�0.5pF RoHS : Compliant | 30,000 | ||
| C0201HQN250-5R6DNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;25V;5.6pF;�0.5pF RoHS : Compliant | 0 | |||
| C0505HQN101-110FNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;100V;11pF;�1% RoHS : Compliant | 0 | |||
| C0505HQN101-2R0BNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;100V;2pF;�0.1pF RoHS : Compliant | 0 | |||
| C0505HQN101-4R7CNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;100V;4.7pF;�0.25pF RoHS : Compliant | 0 | |||
| C0505HQN101-6R6BNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;100V;6.6pF;�0.1pF RoHS : Compliant | 0 | |||
| C0505HQN101-7R3DNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;100V;7.3pF;�0.5pF RoHS : Compliant | 0 | |||
| C0505HQN101-9R2CNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;100V;9.2pF;�0.25pF RoHS : Compliant | 0 | |||
| C0505HQN251-200FNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;250V;20pF;�1% RoHS : Compliant | 0 | |||
| C0505HQN251-2R8BNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;250V;2.8pF;�0.1pF RoHS : Compliant | 0 | |||
| C0505HQN251-4R7ANE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;250V;4.7pF;�0.05pF RoHS : Compliant | 0 | |||
| C0505HQN251-5R4CNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;250V;5.4pF;�0.25pF RoHS : Compliant | 0 | |||
| C0505HQN251-7R3BNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;250V;7.3pF;�0.1pF RoHS : Compliant | 0 | |||
| C0505HQN251-820FNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;250V;82pF;�1% RoHS : Compliant | 0 | |||
| C0505HQN251-8R0DNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;250V;8pF;�0.5pF RoHS : Compliant | 0 | |||
 Vyrian | MGJ3T24150505MC-R13 | Murata Manufacturing | DC-DC Regulated Power Supply Module, 2 Output, 3W, Hybrid | 18,627 | ||
| XGL5050-501MEC | Coilcraft Inc | General Purpose Inductor, 0.5uH, 20%, 1 Element, Composite-Core, SMD, 2221 RoHS : Compliant | 17,117 | |||
| MGJ3T24150505MC-R7 | Murata Manufacturing | DC-DC Regulated Power Supply Module, 2 Output, 3W, Hybrid | 15,939 | |||
| MGJ3T12150505MC-R7 | Murata Manufacturing | DC-DC Regulated Power Supply Module, 2 Output, 3W, Hybrid | 15,601 | |||
| XAL5050-562MEC | Coilcraft Inc | General Purpose Inductor, 5.6uH, 20%, 1 Element, Composite-Core, SMD, 2221 RoHS : Compliant | 13,803 | |||
| 1850505 | Phoenix Contact | Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,168 | |||
| DRV5055-5057EVM | Texas Instruments | 9,358 | ||||
| MGJ3T24150505MC | Murata Manufacturing | DC-DC Regulated Power Supply Module | 759 | |||
| MGJ6T24150505MC-R13 | Murata Manufacturing | DC-DC Regulated Power Supply Module | 686 | |||
REC3.5-0505DRW/R8/A/CTRL | RECOM Power GmbH | DC-DC Regulated Power Supply Module, 2 Output, 3.5W, Hybrid RoHS : Compliant | 616 | |||
| REC3.5-0505DRW/R8/C | RECOM Power GmbH | DC-DC Regulated Power Supply Module, 2 Output, 3.5W, Hybrid RoHS : Compliant | 613 | |||
| MGJ6T24150505MC | Murata Manufacturing | DC-DC Regulated Power Supply Module | 490 | |||
| REC3.5-0505SRW/R10/C | RECOM Power GmbH | DC-DC Regulated Power Supply Module, 1 Output, 3.5W, Hybrid RoHS : Compliant | 407 | |||
| MGJ6T24150505MC-R7 | Murata Manufacturing | DC-DC Regulated Power Supply Module | 316 | |||
| MGJ6T12150505MC-R7 | Murata Manufacturing | DC-DC Regulated Power Supply Module | 251 | |||
 Waytek, Inc. | AL-07-50-5-C | Advanced Cable Ties Inc | ACT AL-07-50-5-C nylon cable tie is a 7.56" self-locking tie with 50 lb. tensile strength for bundling wire, cable, hoses, and tubing. Its one-piece nylon construction supports reliable general-purpose fastening and color-based identification in harness and panel applications. |
| 11,400 | |
| 0695050.PXPS | Littelfuse Inc | MCase+ 32VDC Slotted 50A RoHS : Compliant |
| 2,482 | ||
| 5550500BK00R3 | ShawCor Ltd | DSG-Canusa 5550500BK00R3 CPA-300 heat shrink tubing is black adhesive-lined tubing with a .500" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing. |
| 400 | ||
| 55054 | Cole Hersee | Cole Hersee 55054 standard heavy-duty metal toggle switch is a DPDT (On)-Off-(On) momentary switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features six screw terminals, silver contacts, and a standard 11/16" handle. |
| 261 | ||
| 24505-03 | Littelfuse Inc | Yellow Lockout Lever Kit for 7.9mm Shackle Size |
| 160 | ||
| 55055 | Cole Hersee | Cole Hersee 55055 long-handle heavy-duty metal toggle switch is an SPST On-Off switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features two 0.250" blade terminals, silver contacts, and a 1-1/2" long handle. |
| 153 | ||
| 24505-02 | Littelfuse Inc | Red Lockout Lever Kit for 7.9mm Shackle Size |
| 109 | ||
| HDBB-505-1-250 | 3M | 3M HDBB-505-1-250 heat shrinkable cable breakout boot is a 5-way molded heat shrink shape for multiconductor armored or sheathed cables. It provides electrical and mechanical protection, uses adhesive-sealed polyolefin construction, and has 2.36"/0.96" outlet dimensions for larger breakout sealing. |
| 43 | ||
| VCM-05-05SF | InPower Semiconductor Company Ltd | Solid State One Shot Timer Relay 12V 15A 5 Seconds Fixed DUAL INPUTS |
| 19 | ||
| 8730-1505B | Egis Mobile Electric | XD Flex 2 Triple-(2 Pole Relay w/Knobs - Flying Wire |
| 6 | ||
| VCM-05-05SA | InPower Semiconductor Company Ltd | Solid State One Shot Timer Relay 12V 15A 0-5 Seconds ADJ DUAL INPUTS |
| 4 | ||
| 285050F-121-S | Eaton Electronics | 50A Bussmann Circuit Breaker 285050F-121-S Surface Type III TYPE III M6 |
| 4 | ||
| 7B5051N02W | VTE Incorporated | 500A Weather Proof Power Bushing Red 1/8 - 1/4" 12V USCG 33 CFR SAE J2120 8.5 |
| 0 | ||
| 55054-04 | Cole Hersee | Cole Hersee 55054-04 long-handle heavy-duty metal toggle switch is a DPDT (On)-Off-(On) momentary switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features six screw terminals, silver contacts, and a 1-1/2" long handle. |
| 0 | ||
| 5550500RD00R3 | ShawCor Ltd | DSG-Canusa 5550500RD00R3 CPA-300 heat shrink tubing is red adhesive-lined tubing with a .500" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing. |
| 0 | ||
 Wuhan P&S | IHLP5050FDEK5R6M01 | Vishay Intertechnologies | IHLP? Commercial Inductors, High Saturation Series RoHS : Compliant |
| 3,500 | |
| IHLP5050FDEK2R2M01 | Vishay Intertechnologies | IHLP? Commercial Inductors, High Saturation Series RoHS : Compliant |
| 2,000 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand