5100L-SMB-R Price, 販売店, Stock

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 10 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 10 dB. The Pasternack PE7510-10 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 10 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $495.99
10 : $486.07
25 : $476.15
100 : $466.23

PE7510-1

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 1 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 1 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-1 is a fixed 1 dB attenuator from Pasternack. This 1 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 1 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 1 dB. The Pasternack PE7510-1 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 1 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-1 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 1 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $645.0
10 : $632.1
25 : $619.2
100 : $606.3

PE7385-10

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.3:1, Attenuation: 10 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, N Male to N Female Black Anodized Aluminum Heatsink Body Rated to 100 Watts Up to 3 GHz. PE7385-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7385-10 10 dB attenuator is rated for up to 3 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7385-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $755.0
10 : $724.8
25 : $694.6

PEWAN510-15

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-510, Frequency, Min: 1.45 GHz, Frequency, Max: 2.2 GHz, Beam Width V: 30, Beam Width H: 30. WR-510 Waveguide Standard Gain Horn Antenna Operating From 1.45 GHz to 2.2 GHz, 15 dBi Gain with CPR-510F Flange. Pasternack’s PEWAN510-15 WR-510 waveguide horn is also known as a waveguide horn antenna. This WR-510 standard gain horn waveguide antenna has a nominal gain of 15 dBi. Our waveguide horn can operate at frequencies ranging from 1.45 to 2.2 GHz. The standard gain horn antenna with linear polarization is suitable for test and measurement industries. This 15 dBi waveguide horn from Pasternack has an overall length of 14.4 inches, a width of 18 inches, and a weight of 7.5 lbs. Our WR-510 waveguide horn antenna has a typical vertical beam width of 30 degrees and a horizontal beam width of 30 degrees at 3 dB. Our antenna comes with a cpr-510f flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-510 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-510 waveguide horn antenna with 15 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $3,220.0
5 : $3,091.2
10 : $2,962.4
25 : $2,833.6

PE3C3510

Pasternack Enterprises

PE3C4535-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. SMA Male to TNC Male Cable Using LMR-195 Coax In 100 CM Length., Radio frequency assembly SMA male to TNC male cable using LMR-195 coax in 100 cm length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to TNC male cable using LMR-195 coax in 100 cm length, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE3C4535-100CM, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C4535-100CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4535-100CM can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable using LMR-195 coax in 100 cm length.

1 : $54.99
25 : $52.24
50 : $49.49
100 : $47.29

PE3C7295-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. TNC Male to BNC Male Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly TNC male to BNC male low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to BNC male low loss cable 100 cm length using LMR-100 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our low loss TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C7295-100CM can also be known as a low loss TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE3C7295-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7295-100CM can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to BNC male low loss cable 100 cm length using LMR-100 coax.

1 : $81.99
25 : $77.89
50 : $73.79
100 : $70.51

PE3W25105

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. SMA Female to SMB Plug Right Angle Cable Using 53 Ohm RG55 Coax. PE3W25105 is a SMA female to SMB plug right angle cable using RG55 coax. This Pasternack SMA female to SMB plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. SMA to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to plug SMB right angle cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W25105 SMA female to SMB plug right angle cable assembly is constructed with RG55 coax.

PE3C7955-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 4.3-10 Male to 4.3-10 Female Bulkhead Low PIM Cable 100 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 female bulkhead low PIM cable 100 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male to 4.3-10 female bulkhead low PIM cable 100 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 bulkhead cable connection on the other. Our low PIM 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This 4.3-10 to 4.3-10 cable is a male to female coax assembly, PE3C7955-100CM, can also be known as a low PIM 4.3-10 plug to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 jack cable assembly PE3C7955-100CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 male to 4.3-10 female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7955-100CM can also be used in the other direction and will be 4.3-10 female bulkhead to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 female bulkhead low PIM cable 100 cm length using TFT-402 coax using Times Microwave components.

1 : $95.99
25 : $91.19
50 : $86.39
100 : $82.55

PE3C8305-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. 4.3-10 Male Right Angle to 7/16 DIN Male Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to 7/16 DIN male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM right angle 4.3-10 to 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3C8305-100CM can also be known as a low PIM right angle 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8305-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to 7/16 DIN male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C8305-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8305-100CM can also be used in the other direction and will be a 7/16 DIN male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements.

1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25

PE3W15510

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Black FAKRA Jack to SMB Jack Cable Using LMR-100 Coax. PE3W15510 is a FAKRA jack to SMB jack cable using LMR-100A coax. This Pasternack FAKRA jack to SMB jack cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMB for connector 2. Our jack FAKRA to jack SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15510 FAKRA jack to SMB jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W25104

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SMA Female to SMB Plug Right Angle Cable Using RG58 Coax. PE3W25104 is a SMA female to SMB plug right angle cable using RG58 coax. This Pasternack SMA female to SMB plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. SMA to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to plug SMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25104 SMA female to SMB plug right angle cable assembly is constructed with RG58 coax.

PE35107/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. MCX Plug to SMA Male Right Angle Cable Using RG178 Coax with HeatShrink. PE35107/HS is a MCX plug to SMA male right angle cable using RG178 coax. This Pasternack MCX plug to SMA male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. MCX to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35107/HS MCX plug to SMA male right angle cable assembly is constructed with RG178 coax.

PE35108-18

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly SMA female 2 hole flange to SMA female 2 hole flange cable 18 inch length using PE-SR402FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to SMA female 2 hole flange cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 2 hole flange cable connection on one end and SMA 2 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE35108-18, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE35108-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 2 hole flange to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to SMA female 2 hole flange cable 18 inch length using PE-SR402FL coax.

1 : $119.99
25 : $113.99
50 : $107.99
100 : $103.19

TE Connectivity

5-103673-2

TE Connectivity

3 MTE HDR SRRA LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 3 | PCB Header & Receptacle | Part Number: 5-103673-2 | Internal Number: 5-103673-2 | TE Connectivity
RoHS : Compliant

2,500 : $1.15
1,000 : $1.18
500 : $1.21
250 : $1.24
100 : $1.27
50 : $1.3
25 : $1.33
10 : $1.36
1 : $1.39

6,945

5-103634-4

TE Connectivity

05 MTE HDR SRRA LATCH.100CL LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 5 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 5 | PCB Header & Receptacle | Part Number: 5-103634-4 | Internal Number: 5-103634-4 | TE Connectivity
RoHS : Compliant

5,000 : $1.43
2,500 : $1.47
1,000 : $1.5
500 : $1.54
250 : $1.57
100 : $1.61
50 : $1.64
25 : $1.68
10 : $1.71
1 : $1.75

5,378

5-103944-1

TE Connectivity

8X2 MTE SHRD PIN SR POL .100CL Number of Positions: 2 Connector & Housing Type: Plug Connector Product Type: Connector Assembly Mating Retention: With Mating Retention Type: Latching Feature Standard Rectangular Connector | 2 Plug Connector Assembly With | Part Number: 5-103944-1 | Internal Number: 5-103944-1 | TE Connectivity
RoHS : Compliant

2,500 : $1.64
1,000 : $1.69
500 : $1.73
250 : $1.77
100 : $1.82
50 : $1.86
25 : $1.91
10 : $1.95
1 : $2.0

3,371

5-104363-5

TE Connectivity

06 MTE HDR SRST LATCH .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 5-104363-5 | Internal Number: 5-104363-5 | TE Connectivity
RoHS : Compliant

2,500 : $2.1
1,000 : $2.16
500 : $2.21
250 : $2.27
100 : $2.33
50 : $2.38
25 : $2.44
10 : $2.5
1 : $2.55

3,104

5-104652-4

TE Connectivity

40 50/50 GRID DRST SFMNT RCPT PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Perpendicular Number of Positions: 40 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-104652-4 | Internal Number: 5-104652-4 | TE Connectivity
RoHS : Compliant

1,000 : $12.7
500 : $13.08
250 : $13.47
100 : $13.85
50 : $14.24
25 : $14.62
10 : $15.01
1 : $15.39

2,621

5-102618-4

TE Connectivity

12 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 12 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-102618-4 | Internal Number: 5-102618-4 | TE Connectivity
RoHS : Compliant

2,500 : $3.46
1,000 : $3.55
500 : $3.64
250 : $3.74
100 : $3.83
50 : $3.92
25 : $4.02
10 : $4.11
1 : $4.2

1,992

5-103634-5

TE Connectivity

06 MTE HDR SRRA LATCH.100CL LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 5-103634-5 | Internal Number: 5-103634-5 | TE Connectivity
RoHS : Compliant

2,500 : $1.85
1,000 : $1.9
500 : $1.95
250 : $2.0
100 : $2.06
50 : $2.11
25 : $2.16
10 : $2.21
1 : $2.26

982

3560510KFT

TE Connectivity

3560 510K 1% Resistance Value: 510K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Power Rating: 6 W Surface Mount Resistor | 510K Ω Thick Metal Film Power Resistor 1 % | Part Number: 3560510KFT | Internal Number: 3-2176407-9 | TE Connectivity
RoHS : Compliant

1,000 : $2.63
500 : $2.71
250 : $2.79
100 : $2.87
50 : $2.95
25 : $3.03
10 : $3.11
1 : $3.19

953

3550510RFT

TE Connectivity

3550 510R 1% Resistance Value: 510 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Power Rating: 5 W Surface Mount Resistor | 510 Ω Thick Metal Film Power Resistor 1 % | Part Number: 3550510RFT | Internal Number: 6-2176403-6 | TE Connectivity
RoHS : Compliant

1,000 : $2.03
500 : $2.09
250 : $2.15
100 : $2.21
50 : $2.27
25 : $2.33
10 : $2.4
1 : $2.46

741

5106510-1

TE Connectivity

2MMHM PIN HDR,TYPE B, 175P 7-R PCB Connector Type: PCB Mount Header Data Rate: ≤1 Gb/s Number of Columns: 25 Number of Rows: 7 Backplane Architecture: Mezzanine PCB Mount Header ≤1 Gb/s 25 7 | Hard Metric Backplane Connector | Part Number: 5106510-1 | Internal Number: 5106510-1 | TE Connectivity
RoHS : Compliant

1,000 : $19.94
500 : $20.5
250 : $21.14
100 : $21.85
50 : $22.48
1 : $24.68

570

5-104069-2

TE Connectivity

50 sys 50 hdr drra shrd sn PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 50 PCB Mount Header Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 5-104069-2 | Internal Number: 5-104069-2 | TE Connectivity
RoHS : Compliant

2,500 : $19.73
1,000 : $20.26
500 : $20.8
250 : $21.33
100 : $21.86
50 : $22.39
25 : $22.93
10 : $23.46
1 : $23.99

429

5104338-9

TE Connectivity

A/L LOW PRO HDR 50P VERT HT Connector System: Wire-to-Board Number of Positions: 50 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: With Wire-to-Board 50 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5104338-9 | Internal Number: 5104338-9 | TE Connectivity
RoHS : Compliant

1,000 : $4.69
500 : $4.82
250 : $4.97
100 : $5.13
50 : $5.28
1 : $5.8

397

2-1445100-8

TE Connectivity

MICRO MNL HDR ASSY S/ROW LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 8 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 8 | PCB Header & Receptacle | Part Number: 2-1445100-8 | Internal Number: 2-1445100-8 | Alias Number: BM0614-000 | TE Connectivity
RoHS : Compliant

1,000 : $2.36
100 : $2.93
25 : $3.09
10 : $3.58
1 : $3.99

146

TAD14745101-005

TE Connectivity

M12D4-MS-MS-PUR TYPE C GREEN-5.0M Cable Assembly Type: M12 to M12 Number of Positions: 4 Cable Assembly Length: 5 m Cable Assembly Length: 16.4 ft M8/M12 Application Type: Industrial Ethernet M12 to M12 4 5 m 16.4 ft | Ethernet & Profinet M12-D 4Pos Pur De | Part Number: TAD14745101-005 | Internal Number: TAD14745101-005 | TE Connectivity
RoHS : Compliant

25 : $115.54
10 : $124.43
1 : $133.32

5-103167-4

TE Connectivity

14 MODII HDR DRRA SHRD LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 14 Number of Rows: 2 PCB Mount Header Right Angle Wire-to-Board 14 | PCB Header & Receptacle | Part Number: 5-103167-4 | Internal Number: 5-103167-4 | TE Connectivity
RoHS : Compliant

5,000 : $4.69
2,500 : $4.81
1,000 : $4.92
500 : $5.04
250 : $5.15
100 : $5.27
50 : $5.38
25 : $5.5
10 : $5.61
1 : $5.72

Teledyne HiRel

M38510/35101B2A

Teledyne HiRel

BUFFER/DRIVER, HEX, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/75101B2A

Teledyne HiRel

NOR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/15102BCA

Teledyne HiRel

HEX INVERTER, SCHMITT TRIGGER
RoHS : Not Compliant

M38510/15102BAA

Teledyne HiRel

HEX INVERTER, SCHMITT TRIGGER
RoHS : Not Compliant

M38510/15102BBA

Teledyne HiRel

HEX INVERTER, SCHMITT TRIGGER
RoHS : Not Compliant

M38510/15102BDA

Teledyne HiRel

HEX INVERTER, SCHMITT TRIGGER
RoHS : Not Compliant

M38510/35101BEA

Teledyne HiRel

BUFFER/DRIVER, HEX, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/75101BCA

Teledyne HiRel

NOR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/35101BFA

Teledyne HiRel

BUFFER/DRIVER, HEX, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/75101BDA

Teledyne HiRel

NOR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/00105BBA

Teledyne HiRel

HEX INVERTER
RoHS : Not Compliant

M38510/00301BDA

Teledyne HiRel

BUFFER/DRIVER, NAND, DUAL 4-INPUT
RoHS : Not Compliant

M38510/30102BDA

Teledyne HiRel

DUAL POSITIVE-EDGE-TRIGGERED D FLIP-FLOPS WITH PRESET, CLEAR AND COMPLEMENTARY OUTPUTS

M38510/30902B2A

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT
RoHS : Not Compliant

M38510/31002BXA

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT, WITH OPEN-COLLECTOR INPUTS
RoHS : Not Compliant

Venkel Ltd.

TFCR0805-10W-K-5100DT

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;510R;�0.5%
RoHS : Compliant

TFCR0805-10W-K-5101DT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;5.1K;�0.5%
RoHS : Compliant

TFCR0805-10W-E-5101FT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�25PPM;5.1K;�1%
RoHS : Compliant

TFCR0805-10W-C-5101DT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;5.1K;�0.5%
RoHS : Compliant

TFCR0805-10W-C-5100BT

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;510R;�0.1%
RoHS : Compliant

TFCR0805-10W-C-5103BT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;510K;�0.1%
RoHS : Compliant

TFCR0805-10W-C-5102BT

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;51K ;�0.1%
RoHS : Compliant

TFCR0805-10W-E-5100BT

VENKEL LTD

Thin Film CR;0805;1/10W;�25PPM;510R;�0.1%
RoHS : Compliant

UPTF0805-10W-P-5101BT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;5.1K;�0.1%
RoHS : Compliant

TFCR0805-10W-E-5102DT

VENKEL LTD

Thin Film CR;0805;1/10W;�25PPM;51K;�0.5%
RoHS : Compliant

TFCR0805-10W-K-5103CT

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;510K;�0.25%
RoHS : Compliant

TFCR0805-10W-K-5103DT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;510K;�0.5%
RoHS : Compliant

TFCR0805-10W-C-5101CT

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;5.1K;�0.25%
RoHS : Compliant

TFCR0805-10W-C-5103DT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;510K;�0.5%
RoHS : Compliant

TFCR0805-10W-K-5100BT

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;510R;�0.1%
RoHS : Compliant

Vyrian

JM38510/15102BCB

Texas Instruments

Inverter, TTL/H/L Series, 6-Func, 1-Input, TTL, CDIP14

9,268

M38510/65104SCA

Texas Instruments

NOR Gate, HC/UH Series, 2-Func, 4-Input, CMOS

8,763

JM38510/65102SCA

Texas Instruments

8,534

JM38510/65102SDA

Texas Instruments

8,435

M38510/65101SCX

Texas Instruments

NOR Gate, HC/UH Series, 4-Func, 2-Input, CMOS

8,375

M38510/65101BDX

Texas Instruments

NOR Gate, HC/UH Series, 4-Func, 2-Input, CMOS, CDFP14

6,711

M38510/65102BCX

Texas Instruments

NOR Gate, HC/UH Series, 3-Func, 3-Input, CMOS, CDIP14

6,530

JM38510/65101BCA

National Semiconductor Corporation

NOR Gate, HC Series, 4-Func, 2-Input, CMOS, CDIP14

6,461

M38510/65104SDX

Texas Instruments

NOR Gate, HC/UH Series, 2-Func, 4-Input, CMOS

6,320

JM38510/15103BCB

Texas Instruments

NAND Gate, TTL/H/L Series, 4-Func, 2-Input, TTL, CDIP14

5,221

M38510/31510BC

Texas Instruments

Divide By 12 Counter, Asynchronous, Up Direction, TTL, CDIP14

5,054

M38510/65104BDA

Texas Instruments

NOR Gate, HC/UH Series, 2-Func, 4-Input, CMOS
RoHS : Not Compliant

4,604

M38510/65102B2A

Texas Instruments

NOR Gate, HC/UH Series, 3-Func, 3-Input, CMOS

3,849

JM38510/15101BDB

Texas Instruments

NAND Gate, TTL/H/L Series, 2-Func, 4-Input, TTL, CDFP14

3,704

1.15.108.551/0000

Rafi & Kg

Pushbutton Switch

895

5100L-SMB-R 販売店

リンク URL