 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
5242P-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 NexGen Digital | MMSZ5242BS-7-F | Diodes Incorporated | RoHS : Compliant | 4,444 | ||
| SZMMSZ5242BT1G | onsemi | RoHS : Compliant | 3,000 | |||
| MMSZ5242BT1 | Motorola Semiconductor Products | RoHS : Not Compliant | 3,000 | |||
| 1N5242B | Microsemi FPGA & SoC (now Microchip) | 600 | ||||
 Powell Electronics | 5-2425507-2 | TE Connectivity | Connectors RoHS : Compliant |
| 15,178 | |
| 52421-3 | TE Connectivity | TERMINAL,PIDG SPR SPD 16-14 8 RoHS : Compliant |
| 9,775 | ||
| 55FA0524-24-7L/7L6CS2881 | TE Connectivity | Connectors |
| 1,815 | ||
| 52420 | TE Connectivity | Connectors RoHS : Compliant |
| 1,286 | ||
| 5120524-2 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 704 | ||
| 776524-2 | TE Connectivity | Electronic Component RoHS : Compliant |
| 334 | ||
| 1452426-1 | TE Connectivity | EXTRACTION TOOL RoHS : Not Compliant |
| 193 | ||
| T4052425003-001 | TE Connectivity | Cable Assemblies RoHS : Compliant |
| 129 | ||
| 1-1452424-2 | TE Connectivity | Connectors RoHS : Compliant |
| 46 | ||
| TX40AC45-2420 | TE Connectivity | Connectors RoHS : Compliant |
| 28 | ||
| BZ-2R352420-A2 | Honeywell Sensing and Control | Switch |
| 24 | ||
| 10-190524-28S | Amphenol Corporation | CONNECTOR |
| 12 | ||
| 10-214524-28J | Amphenol Corporation | CONNECTOR |
| 3 | ||
| 10-214524-28S | Amphenol Corporation | CONNECTOR |
| 3 | ||
| CS64H2-25-24-2-Z-CC-BS | TE Connectivity | Connectors |
| 2 | ||
 PUI | 2011-2X06G01S-5.2-4.2B-H1 | 140 | ||||
 Richardson RFPD | 776524-2 | TE Connectivity | Conn Housing PL 4 POS 4.5mm Crimp ST Cable Mount B RoHS : Compliant |
| 0 | |
| 515CCAM524288AAG | Skyworks Solutions Inc | Oscillator VCXO 0.524288MHz ±20ppm (Stability) CMO RoHS : Compliant |
| 0 | ||
REC3.5-2424SRW/R10/C/X1 | RECOM Power GmbH | Module DC-DC 24VIN 1-OUT 24V 0.145A 3.5W 9-Pin DIP RoHS : Compliant |
| 0 | ||
| REC3.5-2424SRW/R8/A/X1 | RECOM Power GmbH | Module DC-DC 24VIN 1-OUT 24V 0.145A 3.5W 6-Pin DIP RoHS : Compliant |
| 0 | ||
| R574F52425 | Radiall | RF Switch SP4T 0MHz to 26.5GHz 50dB RoHS : Not Compliant |
| 0 | ||
| REC3.5-2424SRW/R8/A/CTRL/X1 | RECOM Power GmbH | Module DC-DC 24VIN 1-OUT 24V 0.145A 3.5W 7-Pin DIP RoHS : Compliant |
| 0 | ||
| ATS-52425B-C1-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive BGA Spread SMD Aluminum 4.28C/W RoHS : Compliant |
| 0 | ||
| R573452425 | Radiall | 18Ghz Sma Latching S.P.4T. Switch RoHS : Not Compliant |
| 0 | ||
| 510KAAM524288AAGR | Skyworks Solutions Inc | Oscillator XO 0.524288MHz ±100ppm CMOS 52% 1.8V 4- RoHS : Compliant |
| 0 | ||
| REC3.5-2424SRW/R10/C | RECOM Power GmbH | Module DC-DC 24VIN 1-OUT 24V 0.145A 3.5W 9-Pin DIP RoHS : Compliant |
| 0 | ||
| 510CCAM524288AAGR | Skyworks Solutions Inc | Oscillator XO 0.524288MHz ±30ppm CMOS 52% 3.3V 4-P RoHS : Compliant |
| 0 | ||
| 510CAAM524288AAGR | Skyworks Solutions Inc | Oscillator XO 0.524288MHz ±100ppm CMOS 52% 3.3V 4- RoHS : Compliant |
| 0 | ||
| 413524-2 | TE Connectivity | Conn Decoupled BNC 0Hz to 1GHz 50Ohm Solder RA Thr RoHS : Not Compliant | 0 | |||
| RC7620_1105242 | Sierra Wireless | RC7620,GENERIC,GENERIC,R10;SWI9X07H_00.09.10.00,LE RoHS : Not Compliant | 0 | |||
| REC3.5-2424SRW/R10/A/CTRL | RECOM Power GmbH | Module DC-DC 24VIN 1-OUT 24V 0.145A 3.5W 7-Pin DIP RoHS : Compliant |
| 0 | ||
 Rutronik | MMSZ5242A_R1_00001 | PanJit Touch Screens | Z-DIODE 0,5W SOD - 123 RoHS : Compliant |
| 6,000 | |
| MMSZ5242B_R1_00301 | PanJit Touch Screens | Z-DIODE 0,5W SOD - 123 RoHS : Compliant |
| 6,000 | ||
 Chip 1 Exchange | 1-1452424-1 | TE Connectivity | INSTOCK RoHS : Compliant | 104,370 | ||
| 182524-2 | TE Connectivity | INSTOCK RoHS : Compliant | 9,050 | |||
| MMSZ5242B-7-F | Diodes Incorporated | INSTOCK RoHS : Compliant | 4,501 | |||
| MT095-24230 | MCI | INSTOCK | 4,000 | |||
| MT095-24230 | MITCA | INSTOCK | 3,913 | |||
PCM5242RHBR | Texas Instruments | INSTOCK RoHS : Compliant | 2,910 | |||
| MMBZ52428 | INSTOCK | 2,805 | ||||
| 1N5242B-TR | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 2,400 | |||
| AD5242BRU100 | INSTOCK | 1,910 | ||||
| AD5242BRU100-REEL7 | INSTOCK | 799 | ||||
| MMBZ5242BLT | INSTOCK | 635 | ||||
TC524258BJ-80 | Toshiba America Electronic Components | INSTOCK RoHS : Not Compliant | 359 | |||
| TC524258BJ80 | INSTOCK | 236 | ||||
| 43045-2428 | Molex | INSTOCK RoHS : Compliant | 26 | |||
| 136307-016-524-201 | INSTOCK | 1 | ||||
 Avnet Abacus | MF-MSMF075/24-2 | Bourns Inc | - Tape and Reel (Alt: MF-MSMF075/24-2) RoHS : Compliant | 20,000 | ||
| 10155242-08111LF | Amphenol Corporation | - Tape and Reel (Alt: 10155242-08111LF) RoHS : Compliant | 16,000 | |||
| 10155242-12111LF | Amphenol Corporation | - Tape and Reel (Alt: 10155242-12111LF) RoHS : Compliant | 12,000 | |||
| 10155242-04111LF | Amphenol Corporation | - Tape and Reel (Alt: 10155242-04111LF) RoHS : Compliant | 11,000 | |||
| 936524-2 | TE Connectivity | (Alt: 936524-2) RoHS : Compliant | 4,644 | |||
| 1452421-1 | TE Connectivity | Connector Accessory Cover Assembly AMP MCON Series 154POS Automotive Connectors MCON (Alt: 1452421-1) RoHS : Compliant | 300 | |||
| 4752.4200 | Schurter Electronic Components | (Alt: 4752.4200) RoHS : Compliant | 150 | |||
| 52420 | TE Connectivity | Spring Spade Terminal 1416AWG 2369mm 635mm Tin Loose Piece (Alt: 52420) RoHS : Compliant | 0 | |||
| 52420 | TE Connectivity | Spring Spade Terminal 1416AWG 2369mm 635mm Tin Loose Piece (Alt: 52420) RoHS : Compliant | 0 | |||
| 776524-2 | TE Connectivity | Conn Housing PL 4 POS 45mm Crimp ST Cable Mount (Alt: 776524-2) RoHS : Compliant | 0 | |||
| 878315242 | Molex | MilliGrid Header Shrouded 2mm Pitch Dual Row Vertical 6 Circuits 076m Gold Plating Through Hole (Alt: 878315242) RoHS : Compliant | 0 | |||
| 430452425 | Molex | Conn Wire to Board HDR 24 POS 3mm Solder ST ThruHole Tray (Alt: 430452425) RoHS : Compliant | 0 | |||
| DF65-2428SCF | Hirose Electric Co Ltd | (Alt: CL0666-6003-2-00) RoHS : Compliant | 0 | |||
| EC11B15242AU | Alpine Electronics (Asia) Ltd | ENCODE Tray with nuts and washers (Alt: EC11B15242AU) RoHS : Compliant | 0 | |||
| 40IMX15-24-24-8G | Bel Fuse | Converter DCDC Boardmountable 15W 40Vdc in Dual 24Vdc035A Out 40C85C RoHS (Alt: 40IMX15-24-24-8G) RoHS : Compliant | 0 | |||
 Avnet Asia | MMSZ5242BS | PanJit Semiconductor | Diode Zener Single 12V 5% 200mW 2-Pin SOD-323 T/R (Alt: MMSZ5242BS) RoHS : Compliant | 5,000 | ||
| MMSZ5242A | PanJit Semiconductor | (Alt: MMSZ5242A) RoHS : Compliant | 0 | |||
| 51952-426LF | Amphenol Corporation | (Alt: 51952-426LF) RoHS : Compliant | 0 | |||
| 0430452427 | Molex | (Alt: 0430452427) RoHS : Compliant | 0 | |||
| 935152422522-T5S | Murata Manufacturing Co Ltd | MUR935152422522-T5S SILICON CAPACITOR 22 (Alt: 935152422522-T5S) RoHS : Compliant | 0 | |||
| 10155242-06111LF | Amphenol Corporation | (Alt: 10155242-06111LF) RoHS : Compliant | 0 | |||
| 935152422522-T3N | Murata Manufacturing Co Ltd | (Alt: 935152422522-T3N) RoHS : Compliant | 0 | |||
| 4752.4200 | Schurter Electronic Components | (Alt: 4752.4200) RoHS : Compliant | 0 | |||
| TZM5242B-GS08 | Vishay Intertechnologies | (Alt: TZM5242B-GS08) RoHS : Compliant | 0 | |||
| SZMMSZ5242BT1G | onsemi | (Alt: SZMMSZ5242BT1G) RoHS : Compliant |
| 0 | ||
| 0430452425 | Molex | Pin Header, 24 Contacts, 2 Rows, 3mm, Gold, 8.5A, Straight, Shrouded, Brass Alloy, Wire-to-Board (Alt: 0430452425) RoHS : Compliant | 0 | |||
| MMSZ5242B-HE3_A-08 | Vishay Intertechnologies | ZENER DIODE SOD123-HE3 (Alt: MMSZ5242B-HE3_A-08) RoHS : Compliant | 0 | |||
| 0430452428 | Molex | Pin Header, 24 Contacts, 2 Rows, 3mm, Gold, 8.5A, Straight, Shrouded, Brass Alloy, Wire-to-Board (Alt: 0430452428) RoHS : Compliant | 0 | |||
| 98424-F52-42ALF | Amphenol Corporation | Pin Header, Board-to-Board, Wire-to-Board, 2 mm, 2 Rows, 42 Contacts, Surface Mount Straight (Alt: 98424-F52-42ALF) RoHS : Compliant | 0 | |||
| MMSZ5242B-E3-08 | Vishay Intertechnologies | ZENER DIODE SOD123 (Alt: MMSZ5242B-E3-08) RoHS : Compliant | 0 | |||
 Avnet Silica | MMBZ5242BLT3G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: MMBZ5242BLT3G) RoHS : Compliant | 50,000 | ||
| MMSZ5242B _R1 _00001 | PanJit Semiconductor | SOD 123500mW12VZener DiodeSMD 5 (Alt: MMSZ5242B_R1_00001) RoHS : Compliant | 33,000 | |||
| MMBZ5242BLT1G | onsemi | Zener Single Diode 12 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: MMBZ5242BLT1G) RoHS : Compliant | 18,000 | |||
| MMSZ5242ET1G | onsemi | Zener Single Diode 12 V 500 mW SOD123 2 Pins 150 C Surface Mount (Alt: MMSZ5242ET1G) RoHS : Compliant | 9,000 | |||
BD5242G-TR | ROHM Semiconductor | (Alt: BD5242G-TR) RoHS : Compliant | 0 | |||
| SZMMSZ5242BT1G | onsemi | Zener Single Diode 12 V 500 mW SOD123 2 Pins 150 C Surface Mount (Alt: SZMMSZ5242BT1G) RoHS : Compliant | 0 | |||
| 1N5242B _AY _10001 | PanJit Semiconductor | (Alt: 1N5242B_AY_10001) RoHS : Compliant | 0 | |||
| BZQ5242B _R1 _10001 | PanJit Semiconductor | (Alt: BZQ5242B_R1_10001) RoHS : Compliant | 0 | |||
| MMBZ5242B _R1 _00001 | PanJit Semiconductor | (Alt: MMBZ5242B_R1_00001) RoHS : Compliant | 0 | |||
| MMSZ5242A _R1 _00001 | PanJit Semiconductor | (Alt: MMSZ5242A_R1_00001) RoHS : Compliant | 0 | |||
| MMSZ5242B-AU_R1_000A1 | PanJit Semiconductor | (Alt: MMSZ5242B-AU_R1_000A1) RoHS : Compliant | 0 | |||
| MMBZ5242BW_ R2 _00001 | PanJit Semiconductor | SOT 323200mW12VZener DiodeSMD 5 (Alt: MMBZ5242BW_R2_00001) RoHS : Compliant | 0 | |||
| MMSZ5242BS _R1 _00001 | PanJit Semiconductor | (Alt: MMSZ5242BS_R1_00001) RoHS : Compliant | 0 | |||
| MMBZ5242BW _R1 _00001 | PanJit Semiconductor | (Alt: MMBZ5242BW_R1_00001) RoHS : Compliant | 0 | |||
| MMBZ5242BTW _R1 _00001 | PanJit Semiconductor | (Alt: MMBZ5242BTW_R1_00001) RoHS : Compliant | 0 | |||
 DB Roberts | S-0524-2ZI | PennEngineering (PEM) | Type S SS CLS and CLSS nuts provide load-bearing threads in thin sheets with high pushout and torque-out resistance.Type SP PEM 300� nuts provide strong load-bearing threads in stainless steel sheets as thin as .030. Types S / SS are recommended for u |
| 1,765 | |
| BN5242M8 | Bossard Group | HEX LOCK NUT-METAL DIN980V A2 STAINLESS |
| 26 | ||
| NAS1352-4-28P | Military Specifications |
| 2 | |||
| DSR423-1524-25 | Sugatsune Kogyo Co Ltd | CONCEALED DOOR STRAIGHTENER A | 0 | |||
| 5242-N-125 | RAF Electronic Hardware | 0 | ||||
| ADHS-85-24-200 | Sugatsune Kogyo Co Ltd | SUPER HEAVY DUTY STEEL LEVELIN | 0 | |||
| G5242 | Heyco | PRT 200-14 | 0 | |||
| CLS-0524-2 | PennEngineering (PEM) | Type S SS CLS and CLSS nuts provide load-bearing threads in thin sheets with high pushout and torque-out resistance.Type SP PEM 300� nuts provide strong load-bearing threads in stainless steel sheets as thin as .030. Types S / SS are recommended for u | 0 | |||
| 47-81-524-22 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| DSR403-1524-25 | Sugatsune Kogyo Co Ltd | CONCEALED DOOR STRAIGHTENER A | 0 | |||
| AEOS-524-200 | PennEngineering (PEM) | 0 | ||||
| 47-10-524-22 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| AEOS10-524-200 | PennEngineering (PEM) | Features a low-profile.Allows near-flush installations with no need for special hole preparations such as countersinking or dimpling.Additional thread sizes and grip ranges available. | 0 | |||
| 47-80-524-22 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 96-52-420-11 | Southco | 0 | ||||
 ECCO | MS24524-27 | Honeywell Sensing and Control |
| 3 | ||
 FDH Electronics | MS24524-22 | Safran Electrical & Power UK | Switches | 0 | ||
| MS24524-22 | Honeywell Sensing and Control | Switches |
| 0 | ||
| 3905-035-2420 | Amphenol Aerospace | Cable Assembly | 0 | |||
| 152-42-J-W24 | HellermannTyton | Harness Mgmt | 0 | |||
| 152-42-G-W8 | HellermannTyton | Harness Mgmt | 0 | |||
| MS24524-26 | Safran Electrical & Power UK | Switches | 0 | |||
| MS24524-26 | Honeywell Sensing and Control | Switches | 0 | |||
| 152-42-G-WM250 | HellermannTyton | Harness Mgmt | 0 | |||
| 52421-3 | TE Connectivity | Harness Mgmt RoHS : Compliant | 0 | |||
| 152-42-B7 | HellermannTyton | Harness Mgmt | 0 | |||
| 152-42-J-W21 | HellermannTyton | Harness Mgmt | 0 | |||
| MS24524-29 | Honeywell Sensing and Control | Switches | 0 | |||
| MS24524-29 | Safran Electrical & Power UK | Switches | 0 | |||
| 3905-035-2421 | Amphenol Aerospace | Cable Assembly | 0 | |||
| 152-42-B7-WM250 | HellermannTyton | Heat Shrink Prd | 0 | |||
 Flip Electronics | SZMMSZ5242ET1G | onsemi | Stock, Ship Today RoHS : Compliant | 444,000 | ||
| 1N5242BTR | onsemi | Stock, Ship Today RoHS : Compliant | 40,000 | |||
| MMBZ5242BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 27,000 | |||
| SZMMBZ5242BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 21,000 | |||
| SZMMSZ5242BT1G | onsemi | Stock, Ship Today RoHS : Compliant | 12,000 | |||
| MMSZ5242ET1G | onsemi | Stock, Ship Today RoHS : Compliant | 1,145 | |||
 Neutron USA | 5242 | Keystone Electronics Corp | Cylindrical Battery Contacts, Clips, Holders & Springs C Cell dual Spring Contact RoHS : Compliant |
| 50 | |
| 09365242601 | HARTING Technology Group | Heavy Duty Power Connectors Han 24E Ex male scrw terminal insert RoHS : Compliant |
| 18 | ||
| 5242 | ABB Low Voltage Products and Systems | Conduit Fittings & Accessories 1/2 NON-INSUL 45 DEG LIQTIGHT CONN |
| 0 | ||
| THL 25-2423 | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| ATS-52425B-C1-R0 | Advanced Thermal Solutions Inc | Heat Sinks maxiFLOW BGA Heat Sink, Thermal Tape, Blue-Anodized RoHS : Compliant |
| 0 | ||
| THN 15-2423 | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| TIM 3.5-2423SM | Traco Power | Isolated DC/DC Converters 3.5W 18-36Vin SMD16 +/-15V +/-117mA Med |
| 0 | ||
| THL 25-2422WI | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| 09352420401 | HARTING Technology Group | Headers & Wire Housings Han PushPull SCRJ Fiber Optic, Metal - hood side, crimp termination, including SCRJ Fiber Optic, Metal insert and POF contacts RoHS : Compliant |
| 0 | ||
| THD 15-2423N | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| THD 15-2422WIN | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| TEN 5-2421WI | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| TVN 5-2422WI | Traco Power | Isolated DC/DC Converters +/-12Vout +/-208mA 5W 9-36Vin ISO DIP24 |
| 0 | ||
| TVN 5-2425WI | Traco Power | Isolated DC/DC Converters +/-24Vout +/-104mA 5W 9-36Vin ISO DIP24 |
| 0 | ||
| 5242CDB | APEM Inc | Toggle Switches DPDT 0.4VA 20VAC/DC On-Mom RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W05242-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. TNC Male to TNC Male Cable 100 cm Length Using LMR-195-FR Coax., Radio frequency assembly TNC male to TNC male cable 100 cm length using LMR-195-FR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable 100 cm length using LMR-195-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3W05242-100CM, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W05242-100CM is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 100 cm length using LMR-195-FR coax. |
| 2,031 | |
| PE35242 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50. SMA Male to Reverse Polarity TNC Male Cable Using RG178 Coax. PE35242 is a SMA male to reverse polarity TNC male cable using RG178 coax. This Pasternack SMA male to reverse polarity TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35242 SMA male to TNC reverse polarity male cable assembly is constructed with RG178 coax. | 486 | |||
| PE35242-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to Reverse Polarity TNC Male Cable 36 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to reverse polarity TNC male cable 36 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse polarity TNC male cable 36 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity TNC cable connection on the other. Our SMA to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity TNC cable is a male to male coax assembly, PE35242-36, can also be known as a SMA plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity TNC plug cable assembly PE35242-36 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35242-36 can also be used in the other direction and will be reverse polarity TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity TNC male cable 36 inch length using RG178 coax. |
| 81 | ||
| PE35242-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Male to Reverse Polarity TNC Male Cable 72 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to reverse polarity TNC male cable 72 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse polarity TNC male cable 72 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity TNC cable connection on the other. Our SMA to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity TNC cable is a male to male coax assembly, PE35242-72, can also be known as a SMA plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity TNC plug cable assembly PE35242-72 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35242-72 can also be used in the other direction and will be reverse polarity TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity TNC male cable 72 inch length using RG178 coax. |
| 81 | ||
| PE35242-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to Reverse Polarity TNC Male Cable 60 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to reverse polarity TNC male cable 60 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse polarity TNC male cable 60 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity TNC cable connection on the other. Our SMA to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity TNC cable is a male to male coax assembly, PE35242-60, can also be known as a SMA plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity TNC plug cable assembly PE35242-60 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35242-60 can also be used in the other direction and will be reverse polarity TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity TNC male cable 60 inch length using RG178 coax. |
| 81 | ||
| PE35242LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to Reverse Polarity TNC Male Cable 24 Inch Length Using RG178 Coax, RoHS., Radio frequency assembly SMA male to reverse polarity TNC male cable 24 inch length using RG178 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse polarity TNC male cable 24 inch length using RG178 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity TNC cable connection on the other. Our SMA to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity TNC cable is a male to male coax assembly, PE35242LF-24, can also be known as a SMA plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity TNC plug cable assembly PE35242LF-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35242LF-24 can also be used in the other direction and will be reverse polarity TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity TNC male cable 24 inch length using RG178 coax, RoHS. |
| 81 | ||
| PE3W05242LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C5242-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P160LL, RF Cable Type: PE-P160LL, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 24 Inch Length Using PE-P160LL Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 24 inch length using PE-P160LL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA female bulkhead low loss cable 24 inch length using PE-P160LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3C5242-24, can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C5242-24 is built with PE-P160LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5242-24 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 24 inch length using PE-P160LL coax. |
| 0 | ||
| PE3W15242/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Blue FAKRA Jack to SMA Male Right Angle Low Loss Cable 100 CM Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly blue FAKRA jack to SMA male right angle low loss cable 100 cm length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The blue FAKRA jack to SMA male right angle low loss cable 100 cm length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FAKRA cable connection on one end and a right angle SMA cable connection on the other. Our low loss FAKRA to right angle SMA cable assembly has a jack gender on end 1 and a male on end 2. PE3W15242/HS-100CM can also be known as a low loss FAKRA female to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15242/HS-100CM RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our FAKRA jack to right angle SMA male cable has a maximum VSWR of 1.4:1. FAKRA female to SMA plug cable assembly PE3W15242/HS-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15242/HS-100CM can also be used in the other direction and will be a right angle SMA male to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to SMA cable assembly for quick shipment worldwide. Variations of FAKRA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C5242-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P160LL, RF Cable Type: PE-P160LL, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 60 Inch Length Using PE-P160LL Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 60 inch length using PE-P160LL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA female bulkhead low loss cable 60 inch length using PE-P160LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3C5242-60, can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C5242-60 is built with PE-P160LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5242-60 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 60 inch length using PE-P160LL coax. |
| 0 | ||
| PE3W25242 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to MMCX Plug Cable Using RG196 Coax. PE3W25242 is a SMA female bulkhead to MMCX plug cable using RG196 coax. This Pasternack SMA female bulkhead to MMCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. Our female SMA bulkhead to plug MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25242 SMA female bulkhead to MMCX plug cable assembly is constructed with RG196 coax. | 0 | |||
| PE3W15242/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack to SMA Male Right Angle Low Loss Cable Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly blue FAKRA jack to SMA male right angle low loss cable using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The blue FAKRA jack to SMA male right angle low loss cable using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FAKRA cable connection on one end and a right angle SMA cable connection on the other. Our low loss FAKRA to right angle SMA cable assembly has a jack gender on end 1 and a male on end 2. PE3W15242/HS can also be known as a low loss FAKRA female to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15242/HS RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our FAKRA jack to right angle SMA male cable has a maximum VSWR of 1.4:1. FAKRA female to SMA plug cable assembly PE3W15242/HS is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15242/HS can also be used in the other direction and will be a right angle SMA male to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to SMA cable assembly for quick shipment worldwide. Variations of FAKRA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C5242-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P160LL, RF Cable Type: PE-P160LL, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 50 CM Length Using PE-P160LL Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 50 cm length using PE-P160LL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA female bulkhead low loss cable 50 cm length using PE-P160LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3C5242-50CM, can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C5242-50CM is built with PE-P160LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5242-50CM can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 50 cm length using PE-P160LL coax. |
| 0 | ||
| PE3W15242/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Blue FAKRA Jack to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly blue FAKRA jack to SMA male right angle low loss cable 48 inch length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The blue FAKRA jack to SMA male right angle low loss cable 48 inch length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FAKRA cable connection on one end and a right angle SMA cable connection on the other. Our low loss FAKRA to right angle SMA cable assembly has a jack gender on end 1 and a male on end 2. PE3W15242/HS-48 can also be known as a low loss FAKRA female to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15242/HS-48 RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our FAKRA jack to right angle SMA male cable has a maximum VSWR of 1.4:1. FAKRA female to SMA plug cable assembly PE3W15242/HS-48 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15242/HS-48 can also be used in the other direction and will be a right angle SMA male to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to SMA cable assembly for quick shipment worldwide. Variations of FAKRA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W15242/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Blue FAKRA Jack to SMA Male Right Angle Low Loss Cable 200 CM Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly blue FAKRA jack to SMA male right angle low loss cable 200 cm length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The blue FAKRA jack to SMA male right angle low loss cable 200 cm length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FAKRA cable connection on one end and a right angle SMA cable connection on the other. Our low loss FAKRA to right angle SMA cable assembly has a jack gender on end 1 and a male on end 2. PE3W15242/HS-200CM can also be known as a low loss FAKRA female to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15242/HS-200CM RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our FAKRA jack to right angle SMA male cable has a maximum VSWR of 1.4:1. FAKRA female to SMA plug cable assembly PE3W15242/HS-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15242/HS-200CM can also be used in the other direction and will be a right angle SMA male to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to SMA cable assembly for quick shipment worldwide. Variations of FAKRA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 Win Source Electronics | MMSZ5242B-7-F | Diodes Incorporated | DIODE ZENER 12V 500MW SOD123 RoHS : Compliant |
| 396,000 | |
| MMSZ5242B-TP | Micro Commercial Components | DIODE ZENER 12V 500MW SOD123 RoHS : Compliant |
| 60,000 | ||
| MMSZ5242BS-7-F | Diodes Incorporated | Zener Diode Single 12V 5% 30Ohm 200mW 2-Pin SOD-323 T/R / DIODE ZENER 12V 200MW SOD323 RoHS : Compliant |
| 43,581 | ||
| TZM5242B-GS08 | Vishay Huntington | DIODE ZENER 12V 500MW SOD80 |
| 32,500 | ||
| PCM5242RHBT | Texas Instruments | AUDIO MINI-DSP WITH DAC OUTPUT RoHS : Compliant |
| 18,590 | ||
| TPS565242DRLR | Texas Instruments | IC REG BUCK ADJ 6A SOT563 / Buck Switching Regulator IC Positive Adjustable 0.6V 1 Output 6A SOT-563, SOT-666 RoHS : Compliant |
| 18,230 | ||
| MMBZ5242BLT3G | onsemi | DIODE ZENER 12V 225MW SOD23-3 RoHS : Compliant |
| 11,000 | ||
AD5242BRZ10-REEL7 | Analog Devices Inc | IC POT DGTL DUAL 256POS 16SOIC RoHS : Compliant |
| 8,614 | ||
ADUM5242ARZ | Analog Devices Inc | Dual-Channel Isolators with isoPower Integrated DC-to-DC Converter, 50 mW | DGTL ISO 2.5KV GEN PURP 8SOIC RoHS : Compliant |
| 6,000 | ||
| ADUM5242ARZ-RL7 | Analog Devices Inc | Dual-Channel Isolators with isoPower Integrated DC-to-DC Converter, 50 mW RoHS : Compliant |
| 6,000 | ||
AD5242BRUZ100 | Analog Devices Inc | I2C-Compatible, 256-Position Digital Potentiometers | IC DGT POT 100KOHM 256TP 16TSSOP RoHS : Compliant |
| 3,000 | ||
| AD5242BRZ100 | Analog Devices Inc | I2C-Compatible, 256-Position Digital Potentiometers | IC DGT POT 100KOHM 256TAP 16SOIC RoHS : Compliant |
| 1,976 | ||
| AD5242BRZ100-REEL7 | Analog Devices Inc | IC DGT POT 100KOHM 256TAP 16SOIC / I2C-Compatible, 256-Position Digital Potentiometers RoHS : Compliant |
| 1,860 | ||
| AD5242BRUZ10-RL7 | Analog Devices Inc | IC POT DGTL 256POS 16-TSSOP RoHS : Compliant |
| 927 | ||
| AD5242BRUZ10 | Analog Devices Inc | I2C-Compatible, 256-Position Digital Potentiometers RoHS : Compliant |
| 469 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand