535SE9ZS-RV Price, 販売店, Stock

This versatile design offers a comprehensive range of low-cost grip-tolerant solutions for high volume production applications. It provides a detent and positive stop for consistent positioning and vibration-resistant performance. Quick-access/quick-rele

20835354

Essentra Components

RRH-175-95-350

Essentra Components

M0535-3-A-7

RAF Electronic Hardware

M2185-3506-S-12

RAF Electronic Hardware

SC053515A

Essentra Components

ROUND END CAPSILICON NATURAL

1254535

Essentra Components

FDH Electronics

M23053/5-107/307-4-IN

SUMITOMO ELECTRIC Industries Ltd

Harness Mgmt

2,195

M23053/5-103/303-9-4FT

SUMITOMO ELECTRIC Industries Ltd

Heat Shrink Prd

860

M23053/5-115-9

SUMITOMO ELECTRIC Industries Ltd

Heat Shrink Prd

556

M23053/5-101-0-4FT

SUMITOMO ELECTRIC Industries Ltd

Heat Shrink Prd

100

553-50025

HellermannTyton

Wire Management
RoHS : Compliant

233-104-07MT25-35PC-03

Glenair Inc

Connector Misc

233-103-H7Z125-35SN-03

Glenair Inc

Connector Misc

233-103-H7Z125-35SC-03

Glenair Inc

Connector 38999
RoHS : Compliant

440HS030NF2535-4

Glenair Inc

Connector
RoHS : Not Compliant

M23053/5-103-9

SUMITOMO ELECTRIC Industries Ltd

Heat Shrink Prd

M23053/5-211-C

SUMITOMO ELECTRIC Industries Ltd

Heat Shrink Prd

RNJ46T1535SN023

Amphenol PCD

Connector

1 : $820.82
5 : $765.171
10 : $684.017
25 : $673.807
50 : $673.807
100 : $663.899
250 : $644.93
500 : $627.015
1,000 : $618.426
2,500 : $618.426
10,000 : $618.426

M23053/5-111-3

SUMITOMO ELECTRIC Industries Ltd

Heat Shrink Prd

TV07WCI2535PAF404

Amphenol PCD

Connector

1 : $442.58
5 : $412.575
10 : $368.817
25 : $363.312
50 : $363.312
100 : $357.969
250 : $347.741
500 : $338.082
1,000 : $333.451
2,500 : $333.451
10,000 : $333.451

TV07WCI2535PF404LFC

Amphenol PCD

Connector

1 : $426.854
5 : $397.914
10 : $355.711
25 : $350.402
50 : $350.402
100 : $345.249
250 : $335.385
500 : $326.069
1,000 : $321.602
2,500 : $321.602
10,000 : $321.602

Maritex

PBSS5350Z,135

Nexperia

Bipolar Transistors (BJT); PBSS5350Z,135; NEXPERIA; PNP; 4; 50 V; 3 A
RoHS : Compliant

4,000 : $0.191
2,500 : $0.208
500 : $0.25
150 : $0.317
50 : $0.375
5 : $0.519
1 : $1.624

21,526

66535

Kang Yang Hardware Enterprise Co Ltd

Insulation sleeve for flat connector 6.3 terminal; max cable OD=3.5mm L=24mm W=6.5mm; transparent

1,000 : $0.029
500 : $0.034
100 : $0.039
1 : $0.044

10,363

PCA9535BS,118

NXP Semiconductors

I/O Port Expanders; PCA9535BS,118; NXP SEMICONDUCTORS; I2C, SMBus; 24; 16; 400 kHz
RoHS : Compliant

1,000 : $1.241
500 : $1.355
250 : $1.406
100 : $1.53
25 : $1.725
10 : $1.908
1 : $2.272

8,954

PCA9535PWR

Texas Instruments

I/O Port Expanders; PCA9535PWR; TEXAS INSTRUMENTS; 24; 16; 400 kHz; I2C, SMBus
RoHS : Compliant

1,000 : $0.892
500 : $0.948
100 : $1.079
30 : $1.302
10 : $1.51
1 : $1.935

4,486

PCAL9535AHF,128

NXP Semiconductors

I/O Port Expanders; PCAL9535AHF,128; NXP SEMICONDUCTORS; I2C; 24; 16; 400 kHz
RoHS : Compliant

2,500 : $1.837
1,000 : $2.128
500 : $2.224
250 : $2.326
100 : $2.46
25 : $2.974
10 : $3.238
1 : $3.803

4,188

PCA9535PW

NXP Semiconductors

I/O Port Expanders; PCA9535PW; NXP SEMICONDUCTORS; 24; 16; 400 kHz; I2C, SMBus, Serial
RoHS : Compliant

1,000 : $1.629
300 : $1.784
100 : $1.958
30 : $2.113
10 : $2.612
1 : $3.205

2,724

T4145535041-001

TE Connectivity

Circular Connectors; T4145535041-001; TE CONNECTIVITY; 4; 5; Panel; No
RoHS : Compliant

100 : $15.702
10 : $20.434
1 : $32.41

2,622

TCA9535RGER

Texas Instruments

I/O Port Expanders; TCA9535RGER; TEXAS INSTRUMENTS; 24; 16; 400 kHz; I2C, SMBus
RoHS : Compliant

1,000 : $5.89
500 : $6.46
100 : $7.253
30 : $7.702
10 : $10.103
1 : $11.623

2,307

PCA9535PW,118

NXP Semiconductors

I/O Port Expanders; PCA9535PW,118; NXP SEMICONDUCTORS; I2C, SMBus, Serial; 24; 16; 400 kHz
RoHS : Compliant

1,000 : $0.909
500 : $0.975
100 : $1.178
30 : $1.358
10 : $1.588
1 : $2.024

2,169

PBSS5350X

Nexperia

Bipolar Transistors (BJT); PBSS5350X; NEXPERIA; PNP; 4; 50 V; 3 A
RoHS : Compliant

1,000 : $0.235
300 : $0.256
100 : $0.279
30 : $0.332
10 : $0.415
1 : $0.484

1,989

66535(R)

Kang Yang Hardware Enterprise Co Ltd

Insulation sleeve for flat connector 6.3 terminal; max cable OD=3.5mm L=24mm W=6.5mm; red

1,000 : $0.029
500 : $0.034
100 : $0.039
1 : $0.044

1,752

PLM-25-350

Mean Well

Power Supply; LED; 25.2W; 42-72V; 0.35A; 110-295VAC; 156-417VDC; IP30
RoHS : Compliant

20 : $11.8
10 : $12.099
5 : $12.7
1 : $13.3

133

PCD-25-350B

Mean Well

Power Supply; LED; 20.3W; 40-58V; 350mA; 180-295VAC; IP42
RoHS : Compliant

20 : $15.0
10 : $15.4
5 : $16.1
1 : $16.9

PI4IOE5V9535ZDEX

Diodes Incorporated

Integrated Circuit ;Interface; I/O Expander; I2C,SMBus; Ch:16; 2.3V-5.5V; -40+85 deg.C; SMD; TQFN24
RoHS : Compliant

3,000 : $0.94
1,000 : $1.064
100 : $1.13
25 : $1.193
1 : $1.254

PCA9535PW,112

NXP Semiconductors

I/O Port Expanders; PCA9535PW,112; NXP SEMICONDUCTORS; I2C, SMBus; 24; 16; 400 kHz
RoHS : Compliant

1,000 : $1.649
500 : $1.735
100 : $1.984
30 : $2.255
10 : $2.66
1 : $3.828

Neutron USA

153.5631.6121

Littelfuse Inc

Automotive Fuses 125A 32VDC BF1 PINK M5 TWO HOLES
RoHS : Compliant

1 : $29.99

3-5353652-6

TE Connectivity

CONNECTOR, PLUG, HARD TRAY, 440 POSITION, 0.50 MM, VERTICAL, COM EXPRESS
RoHS : Compliant

1 : $164.99

4412F/2GP-535

ebm-papst

DC Fans DC Axial Fan+Wallring, 119x119x25mm, 10.8-12.6VDC, 168m3/h, Open Collector Tach

1 : $184.99

ATS-55350K-C1-R0

Advanced Thermal Solutions Inc

Heat Sinks BGA Heat Sink, X-CUT, Square Pin Fin, 2 Side Thermal Tape, Black, 35x35x14.5mm
RoHS : Compliant

1 : $34.99

1416535

Phoenix Contact

Sensor Cables / Actuator Cables SAC-2P-MINMR/10-547 Signal - 18AWG
RoHS : Compliant

1 : $105.95

HVGC-65-350A

Mean Well

LED Power Supplies 350mA 18-186Vout 65.1W CC IP65
RoHS : Compliant

1 : $181.43

1558535

Phoenix Contact

Circular Metric Connectors SACC-DSI-MS-4 CON-L180/12 SCOSH
RoHS : Compliant

1 : $59.99

SFP-535-AX

Axiom Manufacturing

Axiom 10GBASE-LRM SFP+ for Gigamon

1 : $456.48

0305352

Phoenix Contact

DIN Rail Terminal Blocks PSBJ-GSK/S GN
RoHS : Compliant

1 : $80.89

VLD25-350-DIP

CUI Inc

LED Power Supplies LED driver (dc) , 350 mA, 5.5 46 Vdc input, 3.3 36 Vdc output, DIP
RoHS : Compliant

1 : $72.1

K75351WW

Kensington Computer Products Group

GRAY SURETRACK WRLS MOUSE DUAL WRLS BLUETOOTH USB

1 : $25.69

RH80535NC013512

Intel Corporation

INTEL CELERON M 1.2 GHZ PROCESSOR ( MOBILE )
RoHS : Compliant

1 : $99.42

09000005352

HARTING Technology Group

Heavy Duty Power Connectors HAN SPLIT HD 4-5MM CBL ENTRY GLAND
RoHS : Compliant

1 : $79.35

1535927

Phoenix Contact

Sensor Cables / Actuator Cables SAC-3P-MS/0.6-PUR/ M 8FS SCO
RoHS : Compliant

1 : $59.99

2905355

Phoenix Contact

REPLACEMENT PLUG FOR SURGE ARRESTERS;VAL-SEC-T2-175-P
RoHS : Compliant

1 : $199.99

Pasternack Enterprises US

PE3C5535/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: FME, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. FME Jack to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly FME jack to SMA male right angle low loss cable 48 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The FME jack to SMA male right angle low loss cable 48 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FME to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FME cable connection on one end and a right angle SMA cable connection on the other. Our low loss FME to right angle SMA cable assembly has a jack gender on end 1 and a male on end 2. PE3C5535/HS-48 can also be known as a low loss FME female to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5535/HS-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. FME female to SMA plug cable assembly PE3C5535/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5535/HS-48 can also be used in the other direction and will be a right angle SMA male to FME jack cable assembly if the opposite connectivity is required. Low loss FME female to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FME to SMA cable assembly for quick shipment worldwide. Variations of FME and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FME to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $74.89
25 : $71.15
50 : $67.4
100 : $64.41

384

PE35353

Pasternack Enterprises

354

PE35356-48

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 48 inches. 75 Ohm TNC Male to 75 Ohm TNC Male Cable 48 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly 75 Ohm TNC male to 75 Ohm TNC male cable 48 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm TNC male to 75 Ohm TNC male cable 48 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE35356-48, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE35356-48 is built with RG59 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm TNC male to 75 Ohm TNC male cable 48 inch length using 75 Ohm RG59 coax.

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

108

PE35353-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Thread, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 36 inches. Reverse Thread SMA Male to Reverse Thread SMA Male Cable 36 Inch Length Using RG142 Coax., Radio frequency assembly reverse thread SMA male to reverse thread SMA male cable 36 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse thread SMA male to reverse thread SMA male cable 36 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse thread SMA cable connection on one end and reverse thread SMA cable connection on the other. Our reverse thread SMA to reverse thread SMA cable assemblies have a male gender on end 1 and male on end 2. This reverse thread SMA to reverse thread SMA cable is a male to male coax assembly, PE35353-36, can also be known as a reverse thread SMA plug to reverse thread SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse thread SMA plug to reverse thread SMA plug cable assembly PE35353-36 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse thread SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse thread SMA male to reverse thread SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA reverse thread plug to SMA reverse thread plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse thread SMA male to reverse thread SMA male cable 36 inch length using RG142 coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE3FCA535-10M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: ST, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 0 deg C, Min Operating Temperature: 60 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex ST UPC to ST UPC, MM OM4, 2.0mm Plenum, Aqua-10M. Pasternack’s PE3FCA535-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long duplex cable assembly is equipped with ST/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 60 to 0 degrees C, this cable provides reliable performance across diverse conditions. As an OM4 fiber optic jumper, Pasternack’s PE3FCA535-10M is designed for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber.The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA535-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA535-10M fiber optic cable with a 2 mm cable diameter and 30 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual ST/UPC to dual ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements.

1 : $36.49
5 : $35.03
10 : $33.57
25 : $32.11

PE3C5356

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. QMA Male Right Angle to SMA Female Cable Using RG58 Coax., Radio frequency assembly QMA male right angle to SMA female cable using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QMA male right angle to SMA female cable using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle QMA cable connection on one end and SMA cable connection on the other. Our right angle QMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This QMA to SMA cable is a male to female coax assembly, PE3C5356, can also be known as a right angle QMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. QMA plug to SMA jack cable assembly PE3C5356 is built with RG58 which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency QMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5356 can also be used in the other direction and will be SMA female to right angle QMA male cable assembly if the opposite connectivity is required. QMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male right angle to SMA female cable using RG58 coax.

PE3C6535

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Reverse Polarity TNC Female Cable Using PE-C400 Coax., Radio frequency assembly reverse polarity TNC male to reverse polarity TNC female cable using PE-C400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity TNC male to reverse polarity TNC female cable using PE-C400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC cable connection on one end and reverse polarity TNC cable connection on the other. Our reverse polarity TNC to reverse polarity TNC cable assemblies have a male gender on end 1 and female on end 2. This reverse polarity TNC to reverse polarity TNC cable is a male to female coax assembly, PE3C6535, can also be known as a reverse polarity TNC plug to reverse polarity TNC jack cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC plug to reverse polarity TNC jack cable assembly PE3C6535 is built with PE-C400 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity TNC male to reverse polarity TNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6535 can also be used in the other direction and will be reverse polarity TNC female to reverse polarity TNC male cable assembly if the opposite connectivity is required. TNC reverse polarity plug to TNC reverse polarity jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC male to reverse polarity TNC female cable using PE-C400 coax.

PE3C7853-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. NEX10 Male Right Angle to NEX10 Male Right Angle Low PIM Cable 50 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly NEX10 male right angle to NEX10 male right angle low PIM cable 50 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. NEX10 male right angle to NEX10 male right angle low PIM cable 50 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom NEX10 to NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle NEX10 cable connection on one end and right angle NEX10 cable connection on the other. Our low PIM right angle NEX10 to right angle NEX10 cable assemblies have a male gender on end 1 and male on end 2. This NEX10 to NEX10 cable is a male to male coax assembly, PE3C7853-50CM, can also be known as a low PIM right angle NEX10 plug to right angle NEX10 plug cable assembly and will be shipped same-day as it is purchased. NEX10 plug to NEX10 plug cable assembly PE3C7853-50CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with right angle NEX10 to right angle NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM NEX10 right angle male to NEX10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM NEX10 right angle plug to NEX10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this NEX10 male right angle to NEX10 male right angle low PIM cable 50 cm length using 1/4 inch superflexible coax.

1 : $139.99
25 : $132.99
50 : $125.99
100 : $120.39

PE3W00535

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. 3.5mm Female to 3.5mm Female Cable Using PE-SR402F. PE3W00535 is a 3.5mm female to 3.5mm female cable using PE-SR402FLJ coax. This Pasternack 3.5mm female to 3.5mm female cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our female 3.5mm to female 3.5mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W00535 3.5mm female to 3.5mm female cable assembly is constructed with PE-SR402FLJ coax.

PE3W06535/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. SMB Plug Right Angle to SMA Male Right Angle Cable Using 53 Ohm RG55 Coax with HeatShrink. PE3W06535/HS is a SMB plug right angle to SMA male right angle cable using RG55 coax. This Pasternack SMB plug right angle to SMA male right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMA for connector 2. SMB right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to male SMA right angle cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W06535/HS SMB plug right angle to SMA male right angle cable assembly is constructed with RG55 coax.

PE7535-40

Pasternack Enterprises

Key Specifications, Design: Continuously Variable, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.5:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 40 dB, Step Type: Dial. 0 to 40 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 4 GHz to 12.4 GHz. PE7535-40 is a continuously variable attenuator from Pasternack. Our coaxial adjustable attenuator has an impedance of 50 Ohm and is precision manufactured to RF and microwave industry specifications. This RF variable attenuator comes with a maximum insertion loss of 0.5 dB. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7535-40 variable RF attenuator has a SMA female connector configuration and a rotary dial for continuous attenuation level adjustment. Our PE7535-40 variable attenuator has a maximum attenuation of 40 dB. This microwave RF variable attenuator has a frequency range of 7 GHz to 12.4 GHz and a maximum VSWR of 1.5:1. Our continuously variable attenuator is rated to 5 Watts (CW) at the stated attenuation. Our continuously variable attenuator has an overall length of 2 inches, a width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 40 dB variable attenuator are on our downloadable PDF datasheet above. Our variable attenuator PE7535-40 is shipped the same business day as purchased from Pasternack’s facility. This attenuator is part of our RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements.

1 : $2,250.0
5 : $2,205.0
10 : $2,160.0
25 : $2,115.0

PE35359LF-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to Reverse Thread SMA Male Cable 36 Inch Length Using RG174 Coax, RoHS., Radio frequency assembly SMA male to reverse thread SMA male cable 36 inch length using RG174 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse thread SMA male cable 36 inch length using RG174 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse thread SMA cable connection on the other. Our SMA to reverse thread SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse thread SMA cable is a male to male coax assembly, PE35359LF-36, can also be known as a SMA plug to reverse thread SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse thread SMA plug cable assembly PE35359LF-36 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse thread SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35359LF-36 can also be used in the other direction and will be reverse thread SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA reverse thread plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse thread SMA male cable 36 inch length using RG174 coax, RoHS.

1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9

PE35359

Pasternack Enterprises

PE3W05353-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Water Blue FAKRA Jack to MCX Plug Low Loss Cable 48 Inch Length Using LMR-100 Coax., Radio frequency assembly water blue FAKRA jack to MCX plug low loss cable 48 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Water blue FAKRA jack to MCX plug low loss cable 48 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to MCX cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and MCX cable connection on the other. Our low loss FAKRA to MCX cable assemblies have a jack gender on end 1 and plug on end 2. PE3W05353-48 can also be known as a low loss FAKRA female to MCX male cable assembly and will be shipped same-day as it is purchased. FAKRA female to MCX male cable assembly PE3W05353-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to MCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency FAKRA jack to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05353-48 can also be used in the other direction and will be MCX plug to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to MCX cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to MCX plug low loss cable 48 inch length using LMR-100 coax.

1 : $54.59
25 : $51.86
50 : $49.13
100 : $46.95

PE3W24535

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. N Female Bulkhead to QMA Male Right Angle Cable Using 53 Ohm RG55 Coax. PE3W24535 is a N female bulkhead to QMA male right angle cable using RG55 coax. This Pasternack N female bulkhead to QMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. N to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to male QMA right angle cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W24535 N female bulkhead to QMA male right angle cable assembly is constructed with RG55 coax.

535SE9ZS-RV 販売店

リンク URL