| データシートサーチシステム |
|
5433-R2 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() TME | 505433-3481 | Molex | Connector: wire-board; male; data; 1.5A; PIN: 34; 1.25mm; tinned |
| 22,000 | |
| 505433-4081 | Molex | Connector: wire-board; male; data; Inom: 1.5A; PIN: 40; 1.25mm |
| 3,000 | ||
| 505433-3071 | Molex | Connector: wire-board; male; data; Inom: 1.5A; PIN: 30; shrouded |
| 1,000 | ||
| 825433-6 | TE Connectivity | Connector: pin strips; pin header; male; data; PIN: 6; THT; straight RoHS : Compliant |
| 362 | ||
| 825433-7 | TE Connectivity | Connector: pin strips; pin header; male; data; PIN: 7; THT; straight RoHS : Compliant |
| 194 | ||
| 54331-0501 | Molex | 54331-0501 RoHS : Compliant |
| 63 | ||
| 6954884543327 | KEYROAD | Pencil sharpener; single,with container; mix colours; plastic |
| 8 | ||
| 10054338 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 4; THR,THT; 3A |
| 0 | ||
| 1543369 | Gedore Torque Ltd | Wrench: hex key; HEX 1/4"; Overall len: 238mm |
| 0 | ||
| 4543380 | Gedore Torque Ltd | Puncher; Ø: 10mm; for stamping out; Tool length: 130mm |
| 0 | ||
| 4NC5433-2DH21 | Siemens | Transformer: current; Iin: 1200A; 10VA; 127.5x112x84.1mm; 720VAC |
| 0 | ||
| 10054337 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 4; THR,THT; 3A |
| 0 | ||
| 1543310000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 47A; 1kV RoHS : Compliant |
| 0 | ||
| 543382-5 | TE Connectivity | Tool: insertion/removal; HAN D-Sub contacts; AMPLIMITE RoHS : Compliant |
| 0 | ||
| 10054334 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 2; THR,THT; 3A |
| 0 | ||
![]() Avnet Americas | 1658543-3 | TE Connectivity | - Tape and Reel (Alt: 1658543-3) RoHS : Compliant |
| 20,000 | |
| 39543-3002 | Molex | - Bulk (Alt: 0395433002) |
| 2,100 | ||
| 1-543382-1 | TE Connectivity | - Bag (Alt: 1-543382-1) RoHS : Compliant |
| 8 | ||
| 505433-1291 | Molex | Pin Header, 12 Contacts, 2 Rows, 1.25mm, Gold, 1.5A, Straight, Shrouded, Brass, Wire-to-Board, SMT - Bulk (Alt: 65AH2990) RoHS : Compliant |
| 0 | ||
| 39543-3019 | Molex | - Bulk (Alt: 0395433019) RoHS : Compliant |
| 0 | ||
| 11543303 | TE Connectivity | - Tape and Reel (Alt: EC5536-000) RoHS : Compliant | 0 | |||
| 505433-0850 | Molex | 1.25WB DL ST ASSY 8CKT NAT G076 W/ KAP - Tape and Reel (Alt: 5054330850) RoHS : Compliant |
| 0 | ||
| 505433-1084 | Molex | MLP1.25 DUAL VT SMT SN ETP 10P BLU W KAP - Tape and Reel (Alt: 5054331084) RoHS : Compliant |
| 0 | ||
| 505433-1291 | Molex | Pin Header, 12 Contacts, 2 Rows, 1.25mm, Gold, 1.5A, Straight, Shrouded, Brass, Wire-to-Board, SMT - Tape and Reel (Alt: 5054331291) RoHS : Compliant |
| 0 | ||
| 505433-1660 | Molex | 1.25WB DL ST ASSY 16CKT NAT G010 W/O KAP - Tape and Reel (Alt: 5054331660) RoHS : Compliant |
| 0 | ||
| 505433-1822 | Molex | 1.25WB DL ST ASSY 18CKT RED G038 W/O KAP - Tape and Reel (Alt: 5054331822) RoHS : Compliant |
| 0 | ||
| 505433-2470 | Molex | MLP1.25 DUAL VT SMT SN ETP 24P NAT - Tape and Reel (Alt: 5054332470) RoHS : Compliant |
| 0 | ||
| 505433-2632 | Molex | 1.25WB DL ST ASSY 26CKT RED G038 W/ KAP - Tape and Reel (Alt: 5054332632) RoHS : Compliant |
| 0 | ||
| 505433-3280 | Molex | MLP1.25 DUAL VT SMT SN ETP 32P NAT W KAP - Tape and Reel (Alt: 5054333280) RoHS : Compliant |
| 0 | ||
| 505433-3442 | Molex | 1.25WB DL ST ASSY 34CKT RED G076 W/O KAP - Tape and Reel (Alt: 5054333442) RoHS : Compliant |
| 0 | ||
![]() Newark | 505433-1881 | Molex | Conn, Hdr, 18Pos, 2Row, 1.25Mm, Smt; |Molex 505433-1881 RoHS : Compliant |
| 4,000 | |
| 505433-1681 | Molex | Conn, Hdr, 16Pos, 2Row, 1.25Mm, Smt; |Molex 505433-1681 RoHS : Compliant |
| 2,000 | ||
| 505433-1291 | Molex | Pin Header, 505433-1291; |Molex 505433-1291 RoHS : Compliant |
| 531 | ||
| SC5433 | Fairview Microwave Inc | Rf/Coaxial Connector, Mini Smp Coaxial; |Fairview Microwave SC5433 RoHS : Compliant |
| 306 | ||
| 543382-7 | TE Connectivity | Insertion/Extraction Tool Tip; For Use With:D Sub Terminals; Product Range:- Rohs Compliant: Na |Te Connectivity Amp 543382-7 RoHS : Not Compliant |
| 244 | ||
| 505433-1881 | Molex | Conn, Hdr, 18Pos, 2Row, 1.25Mm, Smt; |Molex 505433-1881 RoHS : Compliant |
| 244 | ||
| 505433-2291 | Molex | Wtb Connector, Header, 22Pos, 2Row, Smt; Connector Systems:Signal, Wire To Board; Pitch Spacing:1.25Mm; No. Of Rows:2Rows; No. Of Contacts:22Contacts; Contact Termination Type:Surface Mount; Connector Shroud:Shrouded Rohs Compliant: Yes |Molex 505433-2291 RoHS : Compliant |
| 118 | ||
| 505433-0871 | Molex | Connector, Header, 8Pos, 2Row, 1.25Mm; |Molex 505433-0871 (Alternate Part Number: 889056765664 RoHS : Compliant |
| 54 | ||
| MP005433 | SPC Multicomp | Hook-Up Wire, 2.35Mm, Pink, 100M; |Multicomp Pro MP005433 RoHS : Compliant |
| 10 | ||
| 24-15433 | SPC Multicomp | Wire, Hook Up, Pvc, Orange, 24Awg, 25Ft; |Multicomp Pro 24-15433 RoHS : Compliant |
| 7 | ||
| 54332-3070 | Molex | I/O Conn Compact Robot Plg So Lg Socket; |Molex 54332-3070 RoHS : Compliant |
| 2 | ||
| 1-543382-1 | TE Connectivity | Extraction Tool Tip, 25 Pieces; For Use With:Amplimite 28-24Awg Hd-20 Contacts; Product Range:Te Connectivity/Amp 1-5; Accessory Type:Extraction Tool Tip Rohs Compliant: Yes |Te Connectivity 1-543382-1 RoHS : Compliant |
| 2 | ||
| RP225-4-3.3-QD | Astrodyne TDI Power Supplies & EMI Filters | Filter, 1-Phase, 4A, 250V, Chassis; Filter Applications:General Purpose; Voltage Rating:250V; Current Rating:4A; No. Of Phases:Single Phase; No. Of Stages:2 Stage; Filter Input Terminals:Quick Connect; Product Range:Rp225 Series Rohs Compliant: Yes RoHS : Compliant |
| 2 | ||
| FMCA2543-36 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2543-36 RoHS : Not Compliant |
| 1 | ||
| 5433 | Adafruit Industries | Pogo Pin Probe Clip - 6 Pins With 2.54Mm/0.1 Pitch |Adafruit 5433 (Alternate Part Number: 5018341054335 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX5433META+T | Analog Devices Inc | 32-Tap, Nonvolatile, I²C, Line RoHS : Compliant |
| 15,000 | |
AD5433YRUZ![]() | Analog Devices Inc | 10-BIT IOUT DAC PARALLEL ITF RoHS : Compliant |
| 9,091 | ||
AD5433YCPZ![]() | Analog Devices Inc | 10-BIT LOUT DAC PARELLED INT/F RoHS : Compliant |
| 9,066 | ||
| ADG5433WBRUZ | Analog Devices Inc | High V Latchup Proof Triple SP RoHS : Compliant |
| 2,417 | ||
AD5433YRUZ-REEL7![]() | Analog Devices Inc | 10-BIT Iout DAC Parallel ITF I RoHS : Compliant |
| 322 | ||
ADG5433BRUZ![]() | Analog Devices Inc | Triple SPDT & Quad SPDT Latch RoHS : Compliant |
| 20 | ||
| MAX5433LETA+ | Analog Devices Inc | 32-Tap, Nonvolatile, I²C, Line RoHS : Compliant | 0 | |||
| MAX5433LETA+T | Analog Devices Inc | 32-Tap, Nonvolatile, I²C, Line RoHS : Compliant |
| 0 | ||
ADG5433BCPZ-REEL7![]() | Analog Devices Inc | Triple SPDT & Quad SPDT Latch RoHS : Compliant |
| 0 | ||
AD5433YRUZ-REEL![]() | Analog Devices Inc | 10-BIT Iout DAC Parallel ITF I RoHS : Compliant |
| 0 | ||
ADG5433BRUZ-REEL7![]() | Analog Devices Inc | Triple SPDT & Quad SPDT Latch RoHS : Compliant |
| 0 | ||
| MAX5433META+ | Analog Devices Inc | 32-Tap, Nonvolatile, I²C, Line RoHS : Compliant | 0 | |||
![]() RS | 505433-0871 | Molex | PITCH 1.25MM, MICRO-LOCK PLUS PCB HEADER, DUAL ROW, SURFACE MOUNT, 8 CIRCUIT |
| 346 | |
| 825433-3 (6812408P) | TE Connectivity | PCB HEADER, 2.54 MM, VERTICAL, STRAIGHT, 3-WAY, GOLD, AMPMODU MOD II SERIES |
| 228 | ||
| 1-543382-1 | TE Connectivity | INSERTION & EXTRACTION COMBINATION TOOL, SIZE HD20,28-24 AWG, ONE PLUG, BROWN RoHS : Compliant |
| 27 | ||
| ML17-54/33/115/136-5M (909824) | PEPPERL+FUCHS GmbH | SENSOR PHOTOELECTRIC, RETROREFLECTIVE, 3.5M, LIGHT/DARK-ON 5M CABLE, ML17 SERIES |
| 6 | ||
| ASB 8/LED 5-4-331/10M | Lumberg Automation | M12 DISTRIBUTION BOX, 8 PORT, 4 POLE, 1SIGNAL/PORT, 10M, PUR, BLACK, 600003957 |
| 5 | ||
| ASB 8 5-4-331/5M (600003928) | Lumberg Automation | M12 DISTRIBUTION BOX, 8 PORT, 4 POLE, 1SIGNAL/PORT, 5M, PUR, BLACK, 600003928 |
| 5 | ||
| 2454338 (25532412) (SCIA0500800-025RS) | RS Pro | SCREW, 1/2-13 X 8 SOCKET HEAD CAP, PLAIN FINISH |
| 5 | ||
| 2454339 (25532414) (SCIA0500900-010RS) | RS Pro | SCREW, 1/2-13 X 9 SOCKET HEAD CAP, PLAIN FINISH |
| 5 | ||
| MHP-TLR33Q (454335) | PEPPERL+FUCHS GmbH | PHOTOELECTRIC SENSOR, THROUGH BEAM, 3.4M RANGE, 10-30 DC, V1 QC, LED, MHP SERIES |
| 3 | ||
| 1SNA165433R1700 (016543317) | TE Connectivity | MB6/8.P10 DISTRIBUTION, ENTRELEC |
| 3 | ||
| 2825433 | RS Pro | STRAIGHT MALE 4 WAY M12 TO STRAIGHT FEMALE 5 WAY M12 CABLE, PVC, UNSHIELDED, 10M |
| 2 | ||
| RF50543-30M | TURCK Inc | INSTRUMENTATION TRAY CABLE, GRAY PVC JACKET, 5X22 AWG, 30M LENGTH, IN BOX |
| 2 | ||
| VMPA1-B8-R1C2-C-10 (543339) | Festo | REGULATOR PLATE, AIR PRESSURE, FOR 1, MPA-S MFLD BLOCK, .5 TO 8.5 BAR, 10.5MM |
| 2 | ||
| A9F54332 (396791159) | Schneider Electric | MINIATURE CIRCUIT BREAKER, 3P 32A 440VAC, C CURVE, WHITE, DIN RAIL, ACTI9 SERIES |
| 1 | ||
| 5433 | Adafruit Industries | POGO PIN PROBE CLIP - 6 PINS WITH 2.54MM / 0.1" PITCH |
| 0 | ||
![]() Microchip Technology Inc | TC2054-3.3VCTTR![]() | Microchip Technology Inc | 50mA LDO with Shutdown & /Error output, TC1054 upgrade, SOT-23, Projected EOL: 2036-05-16 RoHS : Compliant |
| 20,800 | |
TC1054-3.3VCT713![]() | Microchip Technology Inc | 50mA LDO with Shutdown & /Error output, SOT-23, Projected EOL: 2036-01-01 RoHS : Compliant |
| 12,000 | ||
| DSC1122CI5-433.9200 | Microchip Technology Inc | MEMS OSC, PECL, 433.92MHz, 10PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2045-11-11 RoHS : Compliant |
| 1,000 | ||
| DSC1123CL5-433.0000 | Microchip Technology Inc | MEMS OSC, LVDS, 433MHz, 10PPM, 2.5-3.3V, -40 to 105C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-29 RoHS : Compliant |
| 1,000 | ||
| DSC1122CI5-433.9200T | Microchip Technology Inc | MEMS OSC, PECL, 433.92MHz, 10PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2045-11-11 RoHS : Compliant |
| 1,000 | ||
| DSC1123CL5-433.0000T | Microchip Technology Inc | MEMS OSC, LVDS, 433MHz, 10PPM, 2.5-3.3V, -40 to 105C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-29 RoHS : Compliant |
| 1,000 | ||
MCP1754-3302E/MC![]() | Microchip Technology Inc | 16V, High PSRR, 150mA LDO, Vout=3.3V, DFN, Projected EOL: 2041-08-16 RoHS : Compliant |
| 750 | ||
![]() Rochester Electronics | AD5433YRU-REEL7![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.03us Settling Time, PDSO20 RoHS : Not Compliant |
| 7,643 | |
AD5433YRU![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.03us Settling Time, PDSO20 RoHS : Not Compliant |
| 6,422 | ||
| MAX5433META+T | Analog Devices Inc | Digital Potentiometer, 1 Func, 100000ohm, 2-wire Serial Control Interface, 32 Positions, BICMOS RoHS : Compliant |
| 17,500 | ||
| ADG5433WBRUZ | Analog Devices Inc | IC SPDT 2:1 3 9V, ±9V - 40V, ±22V 16-SOP Tube RoHS : Compliant |
| 904 | ||
AD5433YRUZ-REEL7![]() | Analog Devices Inc | IC DAC 1 CONV 10Bits Multiplying DAC Parallel 20-SOP T/R RoHS : Compliant |
| 16 | ||
ADS5433IPJY![]() | Texas Instruments | ADC, Proprietary Method, 14-Bit, 1 Func, 1 Channel, Parallel, Word Access, Bipolar, PQFP52 RoHS : Compliant |
| 960 | ||
TPS54339DDAR![]() | Texas Instruments | TPS54339 4.5V to 23V Input, 3A Synchronous Step-Down Converter with D-CAP2 Mode RoHS : Compliant |
| 7,500 | ||
TPS54331QDRQ1![]() | Texas Instruments | IC VOLT REG Adjustable Step-Down Buck 1 OUT 800mV - 25V 3A 8-SOIC T/R RoHS : Compliant |
| 8 | ||
| TPS54335DDAR | Texas Instruments | Switching Regulator, Current-mode, 3A, 1800kHz Switching Freq-Max, PDSO8 RoHS : Compliant |
| 144 | ||
TPS54334DRCT![]() | Texas Instruments | IC VOLT REG Adjustable Step-Down Buck 1 OUT 800mV - 24V 3A 10-SON T/R RoHS : Compliant |
| 250 | ||
TPS54335ADRCT![]() | Texas Instruments | IC VOLT REG Adjustable Step-Down Buck 1 OUT 800mV - 24V 3A 10-SON T/R RoHS : Compliant |
| 27 | ||
TPS54331DDA![]() | Texas Instruments | IC VOLT REG Adjustable Step-Down Buck 1 OUT 800mV - 25V 3A 8-SOIC Tube RoHS : Compliant |
| 29 | ||
MAX5433LETA![]() | Maxim Integrated Products | MAX5433 32-Tap, Nonvolatile, I2C, Linear, Digital Potentiometer RoHS : Not Compliant |
| 5,230 | ||
MAX5433META+T![]() | Maxim Integrated Products | Digital Potentiometer, 1 Func, 100000ohm, 2-wire Serial Control Interface, 32 Positions, BICMOS RoHS : Compliant |
| 4,985 | ||
| 5433J/B | Rochester Electronics LLC | 5433 - Quad 2-Input Pos-NOR Buffers (OC) RoHS : Not Compliant |
| 1,014 | ||
![]() Sager | 1543333 | Phoenix Contact | Sensor Cables / Actuator Cables SAC4P-20.0-950/M8FS RoHS : Compliant |
| 0 | |
| 11543303 | TE Connectivity | Wire Labels & Markers | 0 | |||
| 825433-7 | TE Connectivity | Headers & Wire Housings 1X07 POS VERT AU RoHS : Compliant |
| 0 | ||
| AF1-B0-14-625-433-D | Carling Technologies | Circuit Breakers AF1B014625433D RoHS : Compliant |
| 0 | ||
| 5054330842 | Molex | 1.25WB DL ST ASSY 8CKT RED G076 W/O KAP RoHS : Compliant |
| 0 | ||
| 5054331490 | Molex | 1.25WB DL ST ASSY 14CKT NAT G010 W/ KAP RoHS : Compliant |
| 0 | ||
| 5054331652 | Molex | 1.25WB DL ST ASSY 16CKT RED G076 W/ KAP RoHS : Compliant |
| 0 | ||
| 5054332462 | Molex | 1.25WB DL ST ASSY 24CKT RED G010 W/O KAP RoHS : Compliant |
| 0 | ||
| 5054332624 | Molex | 1.25WB DL ST ASSY 26CKT BLU G038 W/O KAP RoHS : Compliant |
| 0 | ||
| 5054332831 | Molex | Headers & Wire Housings 1.25WB DL ST ASSY 28CKT BK G038 W/ KAP RoHS : Compliant |
| 0 | ||
| 5054333272 | Molex | MLP1.25 DUAL VT SMT SN ETP 32P RED RoHS : Compliant |
| 0 | ||
| 5054333434 | Molex | 1.25WB DL ST ASSY 34CKT BLU G038 W/ KAP RoHS : Compliant |
| 0 | ||
| 5054333641 | Molex | Headers & Wire Housings 1.25WB DL ST ASSY 36CKT BK G076 W/O KAP RoHS : Compliant |
| 0 | ||
| 5054334082 | Molex | MLP1.25 DUAL VT SMT SN ETP 40P RED W KAP RoHS : Compliant |
| 0 | ||
| 5054334244 | Molex | 1.25WB DL ST ASSY 42CKT BLU G076 W/O KAP RoHS : Compliant |
| 0 | ||
![]() Coilcraft Direct | SD54-333MLC | Coilcraft Inc | Power inductor, shielded, 10/20% tol, SMT, RoHS RoHS : Compliant |
| 330 | |
![]() ComSIT USA | 5054333481 | Molex | AVAILABLE EU RoHS : Compliant | 1,405 | ||
![]() ComSIT USA | TC105433VCT713 | mct | Electronic Component RoHS : Compliant | 4,095 | ||
| BFC237525433 | Vishay Intertechnologies | Film Capacitor, Polypropylene, 1000V, 3.5% +Tol, 3.5% -Tol, 0.043uF, Through Hole Mount RoHS : Compliant | 2,250 | |||
| 18254332 | TE Connectivity | MODU II PIN HEADER ECONOMY LINE Board Connector, 12 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Green Insulator, Receptacle RoHS : Not Compliant | 2,000 | |||
TPS54331DDAR![]() | Texas Instruments | Switching Regulator, Current-mode, 3A, 570kHz Switching Freq-Max, PDSO8 RoHS : Compliant | 1,475 | |||
| 566054334 | TE Connectivity | Telecom and Datacom Connector, 8 Contact(s), Male, Right Angle, Solder Terminal, Locking, Jack RoHS : Compliant | 999 | |||
| 8254337 | TE Connectivity | SINGLE ROW AMPMODU II PIN HEADER Board Connector, 7 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Green Insulator, Receptacle RoHS : Not Compliant | 500 | |||
| 58254330 | TE Connectivity | SINGLE ROW AMPMODU II PIN HEADER Board Connector, 50 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Green Insulator, Receptacle RoHS : Not Compliant | 300 | |||
| UPD65433N7151F6 | Renesas Electronics Corporation | Electronic Component RoHS : Not Compliant | 115 | |||
TPS54331QDRQ1![]() | Texas Instruments | 3-A, 28-V INPUT, STEP-DOWN SWIFT DC/DC CONVERTER WITH ECO-MODE Switching Regulator, Current-mode, 3A, 570kHz Switching Freq-Max, PDSO8 RoHS : Compliant | 44 | |||
TPS54335ADDAR![]() | Texas Instruments | 4.5-TO 28-VOLT INPUT, 3-AMP OUTPUT, SYNCHRONOUS STEP-DOWN DC-DC CONVERTER Switching Regulator, Current-mode, 3A, 1500kHz Switching Freq-Max, PDSO8 RoHS : Compliant | 13 | |||
![]() Interstate Connecting Components | 225433-0120 | Molex | 1.5 FPC CONN 1ROW REC ASSY RA |
| 135 | |
| 1-543382-1 | TE Connectivity | INSERT/EXTRACT TIP 25-KIT RoHS : Compliant |
| 3 | ||
| 825433-7 | TE Connectivity | MOD 2 PINHDR 1X7 P. RoHS : Compliant |
| 0 | ||
| 5-1372543-3 | TE Connectivity | DRIVESHAFT | 0 | |||
| 155543-3011 | ITT Interconnect Solutions | MKJ3A2T9-19SX | 0 | |||
| 825433-5 | TE Connectivity | MOD 2 PINHDR 1X5 P. RoHS : Compliant |
| 0 | ||
| 93-195433-08P | Amphenol Industrial Operations | Solder Plug, Blk Zn |
| 0 | ||
| 5575433001 | TE Connectivity | 100G0111-1.50-7 | 0 | |||
| 543382-7 | TE Connectivity | INSERT/EXTRACT TIP 25-KIT RoHS : Compliant |
| 0 | ||
| 1770-5433 | Glenair Inc | 1770-5433 | 0 | |||
| 54330-1 | TE Connectivity | CONTACTPWR LKSRS2LS PCSLDR RoHS : Compliant |
| 0 | ||
| 45433-1 | TE Connectivity |
| 0 | |||
| 155543-3031 | ITT Interconnect Solutions | MKJ3A2T9-19SZ | 0 | |||
| 121575-4335 | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| 121575-5433 | ITT Interconnect Solutions | CA3106E22-5S-B-A241-F42 | 0 | |||
![]() NexGen Digital | 505433-4021 | Molex | 160 | |||
![]() PEI Genesis | KPT45525-433 | ITT Interconnect Solutions |
| 18 | ||
| KPT45543-327 | ITT Interconnect Solutions |
| 0 | |||
| 5617635-433 | SOURIAU-SUNBANK |
| 0 | |||
| 533405-433 | SOURIAU-SUNBANK |
| 0 | |||
| D115433-3 | ITT Interconnect Solutions |
| 0 | |||
![]() Powell Electronics | 825433-7 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 4,382 | |
| 825433-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1,746 | ||
| 2-825433-0 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 471 | ||
| 54330-1 | TE Connectivity | Contacts RoHS : Compliant |
| 344 | ||
| 554330-2 | TE Connectivity | Connectors |
| 330 | ||
| 554337-1 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 264 | ||
| 825433-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 206 | ||
| 543382-8 | TE Connectivity | INSERT/EXTRACT TIP 25-KIT RoHS : Compliant |
| 132 | ||
| 6450543-3 | TE Connectivity | Backplane Connectors RoHS : Compliant |
| 101 | ||
| 1-543382-0 | TE Connectivity | INSERT/EXTRACT TIP 25-KIT RoHS : Compliant |
| 48 | ||
| 1-543382-1 | TE Connectivity | Tools RoHS : Compliant |
| 18 | ||
| MS-262-015-433-000R-FR8 | AirBorn a molex company | MS-262-015-433-000R-FR8 |
| 10 | ||
| 543382-7 | TE Connectivity | Tools RoHS : Compliant |
| 5 | ||
| 88-554335-35S | Amphenol Corporation | RECEPT |
| 4 | ||
| H445433-2 | Glenair Inc | CONNECTOR ACCESSORIES |
| 2 | ||
![]() Chip 1 Exchange | 505433-1881 | Molex | INSTOCK | 94,900 | ||
| 504754-3300 | Molex | INSTOCK RoHS : Compliant | 65,000 | |||
| 505433-2081 | Molex | INSTOCK | 62,400 | |||
| 505433-1681 | Molex | INSTOCK | 54,600 | |||
| 505433-1870 | Molex | INSTOCK | 41,600 | |||
| 504754-3320 | Molex | INSTOCK RoHS : Compliant | 32,500 | |||
| 505433-3670 | Molex | INSTOCK | 13,650 | |||
| 505433-1481 | Molex | INSTOCK | 11,050 | |||
| 505433-3281 | Molex | INSTOCK | 6,500 | |||
| 505433-4271 | Molex | INSTOCK | 3,900 | |||
| 1-825433-2 | TE Connectivity | INSTOCK RoHS : Compliant | 2,000 | |||
| 54331-0261 | Molex | INSTOCK RoHS : Compliant | 1,579 | |||
| 26254.331.178 | INSTOCK | 1,046 | ||||
| 0-0825433-5 | TE Connectivity | INSTOCK | 199 | |||
| 4543349201- | INSTOCK | 150 | ||||
![]() Avnet Abacus | 825433-3 | TE Connectivity | Conn Unshrouded Header HDR 3 POS 254mm Solder ST ThruHole (Alt: 825433-3) RoHS : Compliant | 16,500 | ||
| 825433-2 | TE Connectivity | Conn Unshrouded Header 2 POS 254mm Solder ST Through Hole (Alt: 825433-2) RoHS : Compliant | 12,000 | |||
| 5-825433-0 | TE Connectivity | Pin Header Vertical BoardtoBoard 254 mm 1 Rows 50 Contacts Through Hole Straight (Alt: 5-825433-0) RoHS : Compliant | 5,100 | |||
| 825433-4 | TE Connectivity | Pin Header WiretoBoard 254 mm 1 Rows 4 Contacts Through Hole Straight AMPMODU MOD II (Alt: 825433-4) RoHS : Compliant | 3,600 | |||
| 825433-6 | TE Connectivity | Pin Header WiretoBoard 254 mm 1 Rows 6 Contacts Through Hole Straight AMPMODU MOD II (Alt: 825433-6) RoHS : Compliant | 2,400 | |||
| 1-825433-0 | TE Connectivity | Pin Header WiretoBoard 254 mm 1 Rows 10 Contacts Through Hole Straight AMPMODU MOD II (Alt: 1-825433-0) RoHS : Compliant | 1,600 | |||
| M80-5433042 | Harwin | (Alt: M80-5433042) RoHS : Compliant | 90 | |||
| 825433-7 | TE Connectivity | Conn Unshrouded Header HDR 7 POS 254mm Solder ST ThruHole (Alt: 825433-7) RoHS : Compliant | 0 | |||
| 825433-7 | TE Connectivity | Conn Unshrouded Header HDR 7 POS 254mm Solder ST ThruHole (Alt: 825433-7) RoHS : Compliant | 0 | |||
| 15433700 | Aptiv PLC | (Alt: 15433700) RoHS : Compliant | 0 | |||
| 825433-5 | TE Connectivity | Pin Header WiretoBoard 254 mm 1 Rows 5 Contacts Through Hole Straight (Alt: 825433-5) RoHS : Compliant | 0 | |||
| 825433-5 | TE Connectivity | Pin Header WiretoBoard 254 mm 1 Rows 5 Contacts Through Hole Straight (Alt: 825433-5) RoHS : Compliant | 0 | |||
| 5054332831 | Molex | (Alt: 5054332831) RoHS : Compliant | 0 | |||
| 5054332621 | Molex | (Alt: 5054332621) RoHS : Compliant | 0 | |||
| MAL205154333E3 | Vishay Intertechnologies | (Alt: MAL205154333E3) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 0395433003 | Molex | (Alt: 0395433003) RoHS : Compliant | 7,200 | ||
| 0395433002 | Molex | (Alt: 0395433002) RoHS : Compliant | 6,300 | |||
| 825433-5 | TE Connectivity | (Alt: 825433-5) RoHS : Compliant | 0 | |||
| 2543385-6 | TE Connectivity | (Alt: 2543385-6) RoHS : Compliant | 0 | |||
| PJQ5433E-AU | PanJit Semiconductor | (Alt: PJQ5433E-AU) RoHS : Compliant | 0 | |||
| 2543385-8 | TE Connectivity | (Alt: 2543385-8) RoHS : Compliant | 0 | |||
| 2543385-7 | TE Connectivity | (Alt: 2543385-7) RoHS : Compliant | 0 | |||
| AP7354-33W5-7 | Diodes Incorporated | (Alt: AP7354-33W5-7) RoHS : Compliant |
| 0 | ||
| PA5433.202NLT | Pulse Electronics Corporation | (Alt: PA5433.202NLT) RoHS : Compliant | 0 | |||
| 2543385-5 | TE Connectivity | (Alt: 2543385-5) RoHS : Compliant | 0 | |||
| 2543385-1 | TE Connectivity | (Alt: 2543385-1) RoHS : Compliant | 0 | |||
| 2543385-2 | TE Connectivity | (Alt: 2543385-2) RoHS : Compliant | 0 | |||
| 2543385-3 | TE Connectivity | (Alt: 2543385-3) RoHS : Compliant | 0 | |||
| 5054331661 | Molex | (Alt: 5054331661) RoHS : Compliant | 0 | |||
| 2543385-4 | TE Connectivity | (Alt: 2543385-4) RoHS : Compliant | 0 | |||
![]() Avnet Silica | PJQ5433E_R2_00201 | PanJit Semiconductor | PJQ5433ETR13HF3KDFN5060X8LMOSDFNNFET30FKMPPJDFN5060X8LAS06PJQ5433EASHEDFN50608L (Alt: PJQ5433E_R2_00201) RoHS : Compliant | 60,000 | ||
| AP7354-33W5-7 | Diodes Incorporated | Low Quiescent Current Micropower LDO Regulator 015A Output Current 525V Maximum Input Voltage 33 (Alt: AP7354-33W5-7) RoHS : Compliant | 0 | |||
| AP7354-33SA-7 | Diodes Incorporated | (Alt: AP7354-33SA-7) RoHS : Compliant | 0 | |||
| AP7354-33FS4-7 | Diodes Incorporated | LDO Regulator Positive 33V 015A 4Pin X2DFN TR (Alt: AP7354-33FS4-7) RoHS : Compliant | 0 | |||
TC2054-3.3VCTTR![]() | Microchip Technology Inc | (Alt: TC2054-3.3VCTTR) RoHS : Compliant | 0 | |||
TC1054-3.3VCT713![]() | Microchip Technology Inc | (Alt: TC1054-3.3VCT713) RoHS : Compliant | 0 | |||
| PJQ5433E-AU_R2_006A1 | PanJit Semiconductor | Power MOSFET P Channel 30 V 75 A 84 Milliohms DFN5060 8 Pins Surface Mount (Alt: PJQ5433E-AU_R2_006A1) RoHS : Compliant | 0 | |||
![]() Chip-Germany GmbH | 2-825433-0 | TE Connectivity | RoHS : Compliant | 43 | ||
![]() Component Electronics, Inc | CRCW0805433JRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,850 | |
| 307-010-543-300 | EDAC Inc | IN STOCK SHIP TODAY | 100 | |||
| 115-43-308-41-003000 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 78 | ||
TPS54331DR![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| 2222-122-54339 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 17 | ||
TPS54331DRG4![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
2N5433![]() | Vishay Siliconix | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
![]() DB Roberts | 8554-3-30 | HeliCoil |
| 1 | ||
| 15433 | Heyco | HDLCC 625-265 GRAY | 0 | |||
| C5-43-35 | Southco | Streamlined looks and easy operation make this compression latch an ideal choice for highly visible installations requiring a secure sealed fit. Compressive action pulls door tight without rubbing action or wear on pawl or frame. | 0 | |||
| 20035433 | Essentra Components | 0 | ||||
| G5433 | Heyco | PISO 14 GREEN | 0 | |||
| M0543-3-S-12 | RAF Electronic Hardware | 0 | ||||
| M0543-3-AL | RAF Electronic Hardware | 6MM RD X 14MM X 3.2MM ID | 0 | |||
![]() EBV Elektronik | TSOP75433WTT | Vishay Intertechnologies | (Alt: TSOP75433WTT) RoHS : Compliant | 0 | ||
TC1054-3.3VCT713![]() | Microchip Technology Inc | (Alt: TC1054-3.3VCT713) RoHS : Compliant | 0 | |||
![]() Maritex | TPS54332DDAR![]() | Texas Instruments | DC DC Converters; TPS54332DDAR; TEXAS INSTRUMENTS; 8; Buck; 1; 3.9 mm RoHS : Compliant |
| 36,427 | |
| 5054333481 | Molex | Male Pin Headers; 5054333481; MOLEX; 2; 34 RoHS : Compliant |
| 2,473 | ||
TPS54339EDDAR![]() | Texas Instruments | DC DC Converters; TPS54339EDDAR; TEXAS INSTRUMENTS; 8; Buck; 1.7 mm; 1 RoHS : Compliant |
| 1,519 | ||
TPS54331DR![]() | Texas Instruments | LED Driver; buck; 570kHz; 3A; internal MOSFET transistor; 3.5-28V; -40+85 deg.C; SMD; SO8 RoHS : Compliant |
| 1,189 | ||
TPS54336ADRCR![]() | Texas Instruments | DC DC Converters; TPS54336ADRCR; TEXAS INSTRUMENTS; 10; Buck; 1; 3 mm RoHS : Compliant |
| 516 | ||
| 5054330881 | Molex | Male Pin Headers; 5054330881; MOLEX; 2; Vertical RoHS : Compliant |
| 475 | ||
| 5054331471 | Molex | Male Pin Headers; 5054331471; MOLEX; 2; Vertical RoHS : Compliant |
| 309 | ||
| 5054334271 | Molex | Male Pin Headers; 5054334271; MOLEX; 2; 42; Vertical RoHS : Compliant |
| 296 | ||
TPS54339DDAR![]() | Texas Instruments | DC DC Converters; TPS54339DDAR; TEXAS INSTRUMENTS; 8; Buck; 1.7 mm; 1 RoHS : Compliant |
| 139 | ||
| 5054331281 | Molex | Rectangular Connector Housings; 5054331281; MOLEX; 2; Vertical RoHS : Compliant |
| 123 | ||
| RNP18-SP54-330M | RDA Microelectronics | Inductor; SMD; 33uH; 0.88A; 0.23R; 5.2x5.8x4.5mm; 20% |
| 100 | ||
| 5054334081 | Molex | Male Pin Headers; 5054334081; MOLEX; 2; 40; Vertical RoHS : Compliant |
| 92 | ||
TPS54335ADRCR![]() | Texas Instruments | DC DC Converters; TPS54335ADRCR; TEXAS INSTRUMENTS; 10; Buck; 1; 3 mm RoHS : Compliant |
| 9 | ||
![]() Master Electronics | 54332-5001 | Molex | Conn CRC Connector PIN 50 POS 3mm Crimp ST Cable Mount CRC™ Tray RoHS : Compliant |
| 1 | |
| 1543333 | Phoenix Contact | Bus system cable - INTERBUS - 4-position - PUR halogen-free - black RAL 9005 - shielded - free cable end - on Socket straight M8 - cable length: 20 m RoHS : Compliant |
| 0 | ||
| 155433-2031 | ITT Interconnect Solutions | Connector Miniature Circular PIN 4 Position Crimp Straight Cable Mount 4 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| ABB-552A054-33 | Thomas & Betts | JUMPER GROUNDING ASSEMBLY RoHS : Compliant |
| 0 | ||
| 825433-7 | TE Connectivity | MOD 2 PINHDR 1X7 P. RoHS : Compliant |
| 0 | ||
| AF1-B0-14-625-433-D | Carling Technologies | AF1B014625433D RoHS : Compliant |
| 0 | ||
| 505433-1291 | Molex | Conn Wire to Board HDR 12 POS 1.25mm Solder ST Top Entry SMD T/R RoHS : Compliant |
| 0 | ||
| 016543317 | TE Connectivity | ABB-CONNECTION - SNA SERIES SCREW TERMINAL BLOC MOQ Reduction RoHS : Compliant |
| 0 | ||
| 155433-1011 | ITT Interconnect Solutions | Connector Miniature Circular PIN 4 Position Crimp Straight Cable Mount 4 Terminal 1 Port RoHS : Not Compliant |
| 0 | ||
| 155543-3011 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 000543320 | ITT Interconnect Solutions | Conn Circular M 6 POS Crimp ST Cable Mount 6 Terminal 1 Port Automotive RoHS : Not Compliant |
| 0 | ||
| 825433-5 | TE Connectivity | MOD 2 PINHDR 1X5 P. RoHS : Compliant |
| 0 | ||
| ESQT-119-02-GF-5-433 | Samtec Inc | Conn Board Stacker RCP 95 POS 2mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| 5575433001 | TE Connectivity | 100G0111-1.50-7 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 505433-1481 | Molex | Molex 505433-1481 Headers & Wire Housings Microlckplus Vrt Header Dual Row 14P Blk W/ RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE33543-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Female Bulkhead Cable 36 Inch Length Using RG213 Coax., Radio frequency assembly N male to N female bulkhead cable 36 inch length using RG213 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 36 inch length using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE33543-36, can also be known as a type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE33543-36 is built with RG213 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this N type male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33543-36 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 36 inch length using RG213 coax. |
| 162 | |
| PE3C7543-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Plenum N Male Right Angle to SMA Male Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum N male right angle to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum N male right angle to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a type N cable connection on one end and a SMA cable connection on the other. Our low PIM right angle a type N to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C7543-36 can also be known as a low PIM right angle type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. Our PE3C7543-36 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Type N plug to SMA plug cable assembly PE3C7543-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with right angle type N to SMA cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7543-36 can also be used in the other direction and will be SMA male to right angle type N male cable assembly if the opposite connectivity is required. Low PIM type N right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low PIM RF cable assembly as per your requirements. |
| 9 | ||
| PE45433 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: SPP-250-LLPL. SMA Male Connector Solder Attachment for SPP-250-LLPL, Low PIM. PE45433 SMA male coaxial connector has an interface type of SPP-250-LLPL and a 50 Ohm impedance. Pasternack SMA male connector uses shield/contact solder/solder as an attachment method. Our male SMA coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack SMA male coaxial connector has a PTFE dielectric type and a VSWR of 1.3. The Pasternack SMA coaxial connector has a brass body with tri-metal plating. Our PE45433 SMA connector uses brass contact. This SMA male coaxial RF connector is RoHS and REACH compliant. This Pasternack male SMA connector will ship the same day as purchased. Our SMA male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well. |
| 0 | ||
| PE3W15433-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable 24 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 24 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 24 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3W15433-24 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15433-24 RF cable has a FEP jacket of 0.100-inch diameter. The flexible RF cable has an in-series connection. BNC jack to BNC jack cable assembly PE3W15433-24 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W25433 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-240-UF Coax. PE3W25433 is a N male to N male cable using LMR-240-UF coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25433 N male to N male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3FCA543-3M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: ST, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: -20 deg C, Min Operating Temperature: 70 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex ST UPC to ST UPC, SM OS2, 2.0mm LSZH, Yellow-3M. Pasternack’s PE3FCA543-3M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long duplex cable assembly is equipped with ST/UPC to ST/UPC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 70 to -20 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA543-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA543-3M fiber optic cable with a 2 mm cable diameter and 30 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual ST/UPC to dual ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W05433 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Female to SSMA Female Cable Using RG405 Coax. PE3W05433 is a SMA female to SSMA female cable using RG405 coax. This Pasternack SMA female to SSMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMA for connector 2. Our female SMA to female SSMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W05433 SMA female to SSMA female cable assembly is constructed with RG405 coax. | 0 | |||
| PE3C5433 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to SSMB Plug Cable Using LMR-100 Coax., Radio frequency assembly SMA male to SSMB plug cable using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SSMB plug cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SSMB cable connection on the other. Our SMA to SSMB cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SSMB cable is a male to plug coax assembly, PE3C5433, can also be known as a SMA plug to SSMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMB male cable assembly PE3C5433 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SSMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5433 can also be used in the other direction and will be SSMB plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMB plug cable using LMR-100 coax. | 0 | |||
| PE3MP2543-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 36" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 36" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2543-36 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2543-36 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 36" cable. |
| 0 | ||
| PE3W15433LF | Pasternack Enterprises | 0 | ||||
| PE3W01543-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SSMA Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-100 Coax., Radio frequency assembly SSMA male to BNC male low loss cable 36 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMA male to BNC male low loss cable 36 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SSMA cable connection on one end and a BNC cable connection on the other. Our low loss SSMA to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W01543-36 can also be known as a low loss SSMA plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01543-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SSMA male to BNC male cable has a maximum VSWR of 1.4:1. SSMA plug to BNC plug cable assembly PE3W01543-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01543-36 can also be used in the other direction and will be a BNC male to SSMA male cable assembly if the opposite connectivity is required. Low loss SSMA plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to BNC cable assembly for quick shipment worldwide. Variations of SSMA and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W15433-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable 72 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 72 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 72 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3W15433-72 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15433-72 RF cable has a FEP jacket of 0.100-inch diameter. The flexible RF cable has an in-series connection. BNC jack to BNC jack cable assembly PE3W15433-72 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15433-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 48 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable 48 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 48 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 48 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3W15433-48 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15433-48 RF cable has a FEP jacket of 0.100-inch diameter. The flexible RF cable has an in-series connection. BNC jack to BNC jack cable assembly PE3W15433-48 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15433-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable 36 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 36 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 36 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3W15433-36 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15433-36 RF cable has a FEP jacket of 0.100-inch diameter. The flexible RF cable has an in-series connection. BNC jack to BNC jack cable assembly PE3W15433-36 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15433-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable 12 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 12 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 12 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3W15433-12 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15433-12 RF cable has a FEP jacket of 0.100-inch diameter. The flexible RF cable has an in-series connection. BNC jack to BNC jack cable assembly PE3W15433-12 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | 1543333 | Phoenix Contact | Circular Connector, 4 Contact(s), Female, Socket RoHS : Compliant | 11,673 | ||
MAX5433LETA-T![]() | Maxim Integrated Products | Digital Potentiometer, 1 Func, 100000ohm, 2-wire Serial Control Interface, 32 Positions, BICMOS RoHS : Not Compliant | 10,589 | |||
| 5433736 | Phoenix Contact | Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,525 | |||
| TPS54336DDA | Texas Instruments | Switching Regulator, Current-mode, 3A, 408kHz Switching Freq-Max, PDSO8 RoHS : Compliant | 8,820 | |||
AD5433YRU-REEL7![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.03us Settling Time, PDSO20 RoHS : Not Compliant | 8,504 | |||
| 5433W | Texas Instruments | NOR Gate, TTL/H/L Series, 4-Func, 2-Input, TTL, CDFP14 | 8,002 | |||
| TPS543320EVM | Texas Instruments | 7,234 | ||||
SNJ5433W![]() | Texas Instruments | NOR Gate, TTL/H/L Series, 4-Func, 2-Input, TTL, CDFP14 RoHS : Not Compliant | 6,916 | |||
| 5433079 | Phoenix Contact | Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,438 | |||
| 5433053 | Phoenix Contact | Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,616 | |||
AD5433YRU-REEL![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.03us Settling Time, PDSO20 RoHS : Not Compliant | 5,533 | |||
| TPS54334DDAT | Texas Instruments | Switching Regulator, Current-mode, 3A, 684kHz Switching Freq-Max, PDSO8 | 4,271 | |||
ADS5433IPJY![]() | Texas Instruments | ADC, Proprietary Method, 14-Bit, 1 Func, 1 Channel, Parallel, Word Access, Bipolar, PQFP52 RoHS : Compliant | 3,989 | |||
| SN75433JGP4 | Texas Instruments | Peripheral Driver, 2 Driver, BIPolar, CDIP8 RoHS : Not Compliant | 3,140 | |||
| 5433 | Tt Electronics Plc | Interface Circuit | 630 | |||
![]() Win Source Electronics | TPS54331DG4![]() | Texas Instruments | TPS54331 3-A, 28-V Input, Step Down DC-DC Converter With Eco-mode | IC REG BUCK ADJUSTABLE 3A 8SOIC RoHS : Compliant |
| 300,003 | |
TPS54331DRG4![]() | Texas Instruments | IC REG BUCK ADJ 3A 8SOIC RoHS : Compliant |
| 300,002 | ||
| AP7354-33W5-7 | Diodes Incorporated | IC REG LINEAR 3.3V 150MA SOT25 RoHS : Compliant |
| 164,950 | ||
TPS54331DR![]() | Texas Instruments | IC REG BUCK ADJ 3A 8SOIC RoHS : Compliant |
| 106,673 | ||
TPS54335ADRCT![]() | Texas Instruments | IC REG BUCK ADJ 3A SYNC 10VSON RoHS : Compliant |
| 96,130 | ||
TPS54331DDA![]() | Texas Instruments | 3A, 28V INPUT, STEP DOWN SWIFT™ DC/DC CONVERTER WITH ECO-MODE™ RoHS : Compliant |
| 90,000 | ||
TPS54336ADRCT![]() | Texas Instruments | IC REG BUCK ADJUSTABLE 3A 10VSON / Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3A 10-VFDFN Exposed Pad RoHS : Compliant |
| 38,260 | ||
TPS54339DDAR![]() | Texas Instruments | Conv DC-DC 4.5V to 23V Synchronous Step Down Single-Out 0.76V to 7V 3A 8-Pin HSOP EP T/R / IC REG BUCK ADJ 3A SYNC 8SOPWR RoHS : Compliant |
| 32,960 | ||
TPS54336ADDA![]() | Texas Instruments | IC REG BUCK ADJUSTABLE 3A 8SOPWR / Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3A 8-PowerSOIC (0.154", 3.90mm Width) RoHS : Compliant |
| 30,000 | ||
TPS54334DRCR![]() | Texas Instruments | IC REG BUCK ADJUSTABLE 3A 10VSON RoHS : Compliant |
| 11,130 | ||
TPS54334DRCT![]() | Texas Instruments | IC REG BUCK ADJ 3A SYNC 10VSON / Conv DC-DC 4.2V to 28V Synchronous Step Down Single-Out 0.8V to 28V 3A 10-Pin VSON EP T/R RoHS : Compliant |
| 11,080 | ||
TPS54335-2ADRCR![]() | Texas Instruments | IC REG BUCK ADJUSTABLE 3A 10VSON RoHS : Compliant |
| 5,650 | ||
ADG5433BRUZ-REEL7![]() | Analog Devices Inc | Analog Switch Triple SPDT 16-Pin TSSOP T/R RoHS : Compliant |
| 1,970 | ||
AD5433YRUZ-REEL![]() | Analog Devices Inc | 8-/10-/12-Bit, High Bandwidth Multiplying DACs with Parallel Interface | IC DAC 10BIT A-OUT 20TSSOP RoHS : Compliant |
| 70 | ||
AD5433YRUZ-REEL7![]() | Analog Devices Inc | IC DAC 10BIT MULTIPLYING 20TSSOP RoHS : Compliant |
| 60 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |