564L-TN3-R Price, 販売店, Stock

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. MCX Plug Right Angle to SMA Male Low Loss Cable 200 cm Length Using PE-C100-LSZH Coax with HeatShrink, LF Solder., Radio frequency assembly MCX plug right angle to SMA male low loss cable 200 cm length using PE-C100-LSZH coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX plug right angle to SMA male low loss cable 200 cm length using PE-C100-LSZH coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a MCX cable connection on one end and a SMA cable connection on the other. Our low loss right angle a MCX to a SMA cable assembly has plug gender on end 1 and male on end 2. PE3W05648LF/HS-200CM can also be known as a low loss right angle MCX male to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05648LF/HS-200CM RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX male to SMA plug cable assembly PE3W05648LF/HS-200CM is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W05648LF/HS-200CM can also be used in the other direction and will be SMA male to right angle MCX plug cable assembly if the opposite connectivity is required. Low loss MCX right angle male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements.

1 : $104.99
25 : $99.74
50 : $94.49
100 : $90.29

745

PE3C5640LF

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable using PE-SR405AL coax, LF solder.

100

PE36156-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMP Female to SMP Female Right Angle Cable 48 Inch Length Using PE-SR047FL Coax., Radio frequency assembly SMP female to SMP female right angle cable 48 inch length using PE-SR047FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female to SMP female right angle cable 48 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and right angle SMP cable connection on the other. Our SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE36156-48, can also be known as a SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE36156-48 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36156-48 can also be used in the other direction and will be right angle SMP female to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMP female right angle cable 48 inch length using PE-SR047FL coax.

1 : $173.99
25 : $165.29
50 : $156.59

PE3W02356-48

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to TNC Male Cable 48 Inch Length Using LMR-600-DB Coax., Radio frequency assembly N male to TNC male cable 48 inch length using LMR-600-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to TNC male cable 48 inch length using LMR-600-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our N type to TNC cable assemblies have a male gender on end 1 and male on end 2. This N type to TNC cable is a male to male coax assembly, PE3W02356-48, can also be known as a type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W02356-48 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02356-48 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. N type plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male cable 48 inch length using LMR-600-DB coax.

1 : $162.99
25 : $154.84
50 : $146.69
100 : $140.17

PE3W06564LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm. MMCX Plug to MMCX Plug Cable Using PE-SR047AL Coax with HeatShrink, LF Solder. PE3W06564LF/HS is a MMCX plug to MMCX plug cable using PE-SR047AL coax. This Pasternack MMCX plug to MMCX plug cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MMCX for connector 2. Our plug MMCX to plug MMCX cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W06564LF/HS MMCX plug to MMCX plug cable assembly is constructed with PE-SR047AL coax.

PE3W20564

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female Bulkhead to 1.0/2.3 Jack Bulkhead Cable Using LMR-100 Coax. PE3W20564 is a reverse polarity SMA female bulkhead to 1.0/2.3 jack bulkhead cable using LMR-100A coax. This Pasternack reverse polarity SMA female bulkhead to 1.0/2.3 jack bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. Our reverse polarity female SMA bulkhead to jack 1.0/2.3 bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20564 SMA reverse polarity female bulkhead to 1.0/2.3 jack bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W25640

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Male to SMC Jack Bulkhead Cable Using RG316-DS Coax. PE3W25640 is a SMA male to SMC jack bulkhead cable using RG316-DS coax. This Pasternack SMA male to SMC jack bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMC for connector 2. Our male SMA to jack SMC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25640 SMA male to SMC jack bulkhead cable assembly is constructed with RG316-DS coax.

PE44564

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Clamp/Solder, Mount Method: None, Interface Type 1: 1/2 inch Annular, Interface Type 2: 1/2 inch Flexible, Interface Type 3: PE-1/2FAC. N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Annular, 1/2 inch Flexible, PE-1/2FAC. PE44564 type N male right angle coaxial connector has an interface type of 1/2 inch Annular, 1/2 inch Flexible, PE-1/2FAC and a 50 Ohm impedance. Pasternack type N male connector uses shield/contact clamp/solder as an attachment method. The Pasternack right angle type N male coaxial connector has a teflon dielectric type. The Pasternack type N coaxial connector has a brass body with tri-metal plating. Our PE44564 type Nright angle connector uses brass contact. This type N male right angle coaxial RF connector is RoHS and REACH compliant. This Pasternack right angle male type N connector will ship the same day as purchased. Our type N right angle male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom N type connector cable assemblies that will ship the same day as well.

1 : $69.59
25 : $66.81
50 : $64.72
100 : $63.33

PE3C0564LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Female to SMA Male Cable Using LMR-195 Coax, LF Solder. PE3C0564LF is a N female to SMA male cable using LMR-195 coax. This Pasternack N female to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0564LF N female to SMA male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C3564/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50. SMA Male Right Angle to SMB Plug Right Angle Cable Using LMR-100 Coax. PE3C3564/HS is a SMA male right angle to SMB plug right angle cable using LMR-100A coax. This Pasternack SMA male right angle to SMB plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. SMA right angle to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to plug SMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3564/HS SMA male right angle to SMB plug right angle cable assembly is constructed with LMR-100A coax and the maximum VSWR is 1.4:1, * LMR™ is a trademark of Times Microwave Systems.

PE3C3564LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMB Plug Right Angle Cable Using LMR-100 Coax, LF Solder. PE3C3564LF is a SMA male right angle to SMB plug right angle cable using LMR-100A coax. This Pasternack SMA male right angle to SMB plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. SMA right angle to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to plug SMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3564LF SMA male right angle to SMB plug right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3FCA564-15M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC APC to ST UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Yellow-15M. Pasternack’s PE3FCA564-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 4-fiber cable assembly is equipped with LC/APC to ST/UPC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA564-15M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/APC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $156.99
5 : $150.71
10 : $144.43
25 : $138.15

PE3W02656-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to N Male Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to N male cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N male cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our SMA to type N cable assembly has male gender on end 1 and male on end 2. PE3W02656-48 can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to type N plug cable assembly PE3W02656-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3W02656-48 RF cable are available on our downloadable PDF datasheet.PE3W02656-48 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

PE3W05645-36

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 36 inches. MCX Plug to TNC Female Bulkhead Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly MCX plug to TNC female bulkhead cable 36 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug to TNC female bulkhead cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and TNC bulkhead cable connection on the other. Our MCX to TNC cable assemblies have a plug gender on end 1 and female on end 2. This MCX to TNC cable is a plug to female coax assembly, PE3W05645-36, can also be known as a MCX male to TNC jack cable assembly and will be shipped same-day as it is purchased. MCX male to TNC jack cable assembly PE3W05645-36 is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MCX plug to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05645-36 can also be used in the other direction and will be TNC female bulkhead to MCX plug cable assembly if the opposite connectivity is required. MCX male to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to TNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to TNC female bulkhead cable 36 inch length using RG316 coax.

1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45

PE3W25643

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SMA Male to SSMA Female Cable Using RG188-DS Coax. PE3W25643 is a SMA male to SSMA female cable using RG188-DS coax. This Pasternack SMA male to SSMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMA for connector 2. Our male SMA to female SSMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25643 SMA male to SSMA female cable assembly is constructed with RG188-DS coax.

TE Connectivity

1-1564542-1

TE Connectivity

2POS,AMP MCP6.3/4.8K,REC HSG,A Nominal Voltage Architecture: 24 V 12 V 48 V Number of Positions: 2 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 5.8 mm 48V Ready 6.3Mm Sealed Connector | 24 V | Part Number: 1-1564542-1 | Internal Number: 1-1564542-1 | 5.8 mm | TE Connectivity
RoHS : Compliant

1 : $2.01

12,707

3-644564-2

TE Connectivity

02P MTA100 CONN ASSY F/T 26AWG Number of Positions: 2 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: With Mating Alignment Type: Polarization Nylon Tin Plated Receptacle: 2.54 Mm & With Mating Alignment & Mta 100 | 2 Receptacle Connector Assembly With | Part Number: 3-644564-2 | Internal Number: 3-644564-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.19
100 : $0.25
10 : $0.31
1 : $0.4

9,345

165564-1

TE Connectivity

110 PIDG FASTON REC Quick Disconnect Terminal Type: Receptacle Insulation Option: Partially Insulated Wire Size: 22 – 16 AWG Wire Size: .3 – 1.5 mm² Wire Size: 592 – 3260 CMA Receptacle Partially Insulated 22 – 16 AWG .3 – 1.5 mm² | Quick Disconnect | Part Number: 165564-1 | Internal Number: 165564-1 | TE Connectivity
RoHS : Compliant

5,000 : $1.02
2,500 : $1.04
1,000 : $1.07
500 : $1.09
250 : $1.12
100 : $1.14
50 : $1.17
25 : $1.19
10 : $1.22
1 : $1.24

6,841

4-644456-4

TE Connectivity

14P MTA100 HDR ASSY (NARROW) PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 14 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 14 | Polyester Vertical PCB Header: 2.54Mm & Breakaway & Mta 100 | Part Number: 4-644456-4 | Internal Number: 4-644456-4 | TE Connectivity
RoHS : Compliant

1,000 : $0.38
100 : $0.51
10 : $0.63
1 : $0.8

4,598

1-965640-3

TE Connectivity

JUN-POW-TIM GEH 6P Nominal Voltage Architecture: 12 V Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Wire-to-Board Mating Tab Width: 2.8 mm Timer Connector Housing | 12 V 6 Housing for Female Terminals Wire-to-Wire | Part Number: 1-965640-3 | Internal Number: 1-965640-3 | 2.8 mm | TE Connectivity
RoHS : Compliant

2,500 : $0.3
1,000 : $0.37
500 : $0.45
250 : $0.57
100 : $0.75
50 : $0.9

1,288

5646956-3

TE Connectivity

UPM PIN ASSY, SEQUENCED, 6 POS PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Co-Planar Number of Positions: 6 PCB Mount Header Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 5646956-3 | Internal Number: 5646956-3 | TE Connectivity
RoHS : Compliant

1,000 : $13.93
500 : $14.33
250 : $14.77
100 : $15.26
50 : $15.71
1 : $17.24

926

3-1564414-1

TE Connectivity

12POS,TAB 1.6X0.6,TAB HSG,ASSY Nominal Voltage Architecture: 12 V 24 V 48 V Number of Positions: 12 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Tab Width: 1.6 mm Heavy Duty Sealed Connector Series Housing | 12 V | Part Number: 3-1564414-1 | Internal Number: 3-1564414-1 | 1.6 mm | TE Connectivity
RoHS : Compliant

1 : $3.77

786

2490856-4

TE Connectivity

18POS,Sz16,SOC HSG ASSY,SLD,COD D Nominal Voltage Architecture: 24 V Number of Positions: 18 Connector & Housing Type: Plug Connector System: Cable-to-Cable Sealable: Yes Ntseal Socket Housings For Female Terminals. | 24 V 18 Plug Cable-to-Cable | Part Number: 2490856-4 | Internal Number: 2490856-4 | TE Connectivity
RoHS : Compliant

1 : $9.77

540

5646446-1

TE Connectivity

2MM HM,ASY,T-F,REC,TWIST TULIP PCB Connector Type: PCB Mount Receptacle Data Rate: ≤1 Gb/s Number of Columns: 11 Number of Rows: 8 Backplane Architecture: Mezzanine PCB Mount Receptacle ≤1 Gb/s 11 8 | Hard Metric Backplane Connector | Part Number: 5646446-1 | Internal Number: 5646446-1 | TE Connectivity
RoHS : Compliant

1,000 : $12.09
500 : $12.43
250 : $12.82
100 : $13.25
50 : $13.64
1 : $14.96

458

2071556-4

TE Connectivity

OJS-SS-112HMF,00000 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form A SPST-NO Contact Current Rating: 10 A General Purpose Power Relay DC Monostable 1 Form A SPST-NO | Electromechanical Relay | Part Number: 2071556-4 | Internal Number: 2071556-4 | TE Connectivity
RoHS : Compliant

500 : $3.03
250 : $3.14
100 : $3.24
50 : $3.34
25 : $3.45
10 : $3.56
1 : $3.67

392

965643-1

TE Connectivity

ABDECKKAPPE F42P Number of Positions: 42 Primary Product Color: Black Protection & Strain Relief Accessory Type: Cover Primary Product Material: PBT Strain Relief: Without Automotive Connector Cap & Cover | 42 Black Cover PBT | Part Number: 965643-1 | Internal Number: 965643-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.92
500 : $1.16
250 : $1.76
100 : $2.31
50 : $2.77

285

1564411-5

TE Connectivity

SLIDE,TAB HSG GROUP E Primary Product Color: Gray Primary Product Material: PBT GF Automotive Connector Accessory Type: Mounting Clip Operating Temperature Range: -40 – 140 °C Operating Temperature Range: -40 – 284 °F Gray PBT GF | Heavy Duty Sealed Connector Series Fixing Slide | Part Number: 1564411-5 | Internal Number: 1564411-5 | TE Connectivity
RoHS : Compliant

1 : $0.65

181

5646488-1

TE Connectivity

2MM H.M., A/B-19 RECEPT. ASSY. PCB Connector Type: PCB Mount Receptacle Data Rate: ≤1 Gb/s Number of Columns: 19 Number of Rows: 5 Backplane Architecture: Mezzanine PCB Mount Receptacle ≤1 Gb/s 19 5 | Hard Metric Backplane Connector | Part Number: 5646488-1 | Internal Number: 5646488-1 | TE Connectivity
RoHS : Compliant

1,000 : $17.79
500 : $18.3
250 : $18.87
100 : $19.5
50 : $20.07
1 : $22.02

148

3-5646547-0

TE Connectivity

Z-PACK A-B 25 COLUMN SHLD ASSY PCB Connector Type: PCB Mount Receptacle Data Rate: ≤1 Gb/s Number of Columns: 25 Number of Rows: 5 Backplane Architecture: Traditional Backplane PCB Mount Receptacle ≤1 Gb/s 25 | Hard Metric Backplane Connector | Part Number: 3-5646547-0 | Internal Number: 3-5646547-0 | TE Connectivity
RoHS : Compliant

1,000 : $19.6
500 : $20.15
250 : $20.78
100 : $21.47
50 : $22.1
1 : $24.25

282856-4

TE Connectivity

TERMI-BLOK PCB MOUNT 4P Number of Positions: 4 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 4 Header Wire-to-Board .197" | Part Number: 282856-4 | Internal Number: 282856-4 | .197" | TE Connectivity
RoHS : Compliant

1,000 : $2.68
500 : $2.76
250 : $2.84
100 : $2.92
50 : $3.0
25 : $3.08
10 : $3.16
1 : $3.24

Teledyne HiRel

5962-9056401XA

Teledyne HiRel

CONTROLLER, 8-BIT, HIGH-PERFORMANCE, WITH 16K BYTES EPROM PROGRAM MEMORY
RoHS : Not Compliant

5962-9056402XA

Teledyne HiRel

CONTROLLER, 8-BIT, HIGH=PERFORMANCE, WITH 16K BYTES EPROM PROGRAM MEMORY
RoHS : Not Compliant

5962-9056401MA

Teledyne HiRel

CONTROLLER, 8-BIT, HIGH-PERFORMANCE, WITH 16K BYTES EPROM PROGRAM MEMORY
RoHS : Not Compliant

5962-9056402MA

Teledyne HiRel

CONTROLLER, 8-BIT, HIGH=PERFORMANCE, WITH 16K BYTES EPROM PROGRAM MEMORY
RoHS : Not Compliant

Venkel Ltd.

AGCR0805-YK-564JT

VENKEL LTD

Auto Grade Resistor;0805;1/3W;�100PPM;560K;�5%
RoHS : Compliant

HPCR1210-W-564JT

VENKEL LTD

High Power CR;1210;3/4W;560K;�5%
RoHS : Compliant

PWCR1210-WK-564JT

VENKEL LTD

Pulse Withstanding CR;1210;3/4W;�100PPM;560K;�5%
RoHS : Compliant

TFCR2512-2W-E-1564CT-1K

VENKEL LTD

Thin Film CR;2512;1/2W;�25PPM;1.56M;�0.25%
RoHS : Compliant

PWCR1206-WK-564JT

VENKEL LTD

Pulse Withstanding CR;1206;3/4W;�100PPM;560K;�5%
RoHS : Compliant

AGCR0201-NL-564JT

VENKEL LTD

Auto Grade Resistor;0201;1/20W;�200PPM;560K;�5%
RoHS : Compliant

HPCR1206-V-564JT

VENKEL LTD

High Power CR;1206;1/2W;560K;�5%
RoHS : Compliant

CRG1206-T-564JT

VENKEL LTD

RoHS 10/10 Green CR;1206;1/4W;560K;�5%
RoHS : Compliant

CR1206-8W-564JT

VENKEL LTD

Chip Resistor;1206;1/8W;560K;�5%
RoHS : Compliant

AGCR2512-2XK-564JT

VENKEL LTD

Auto Grade Resistor;2512;2W;�100PPM;560K;�5%
RoHS : Compliant

SWCR1206-VK-564MT

VENKEL LTD

Surge Withstanding CR;1206;1/2W;�100PPM;560K;�20%
RoHS : Compliant

SWCR1210-XK-564JT

VENKEL LTD

Surge Withstanding CR;1210;1W;�100PPM;560K;�5%
RoHS : Compliant

PWCR2010-YK-564JT

VENKEL LTD

Pulse Withstanding CR;2010;1.25W;�100PPM;560K;�5%
RoHS : Compliant

AGCR0402-RK-564JT

VENKEL LTD

Auto Grade Resistor;0402;1/8W;�100PPM;560K;�5%
RoHS : Compliant

AGCR1210-VK-564JT

VENKEL LTD

Auto Grade Resistor;1210;1/2W;�100PPM;560K;�5%
RoHS : Compliant

Vyrian

5962-9564201VRA

Texas Instruments

Bus Transceiver, LVT Series, 1-Func, 8-Bit, True Output, BICMOS, CDIP20
RoHS : Not Compliant

9,862

MAX22564CAAP-V+

Analog Devices (Maxim Integrated)

8,213

AD5640CRM-1

Analog Devices Inc

D/A Converter, 1 Func, Serial Input Loading, 8us Settling Time, PDSO8
RoHS : Not Compliant

7,521

AD8564ARZ-REEL

Analog Devices Inc

Comparator, 4 Func, 10000uV Offset-Max, 8ns Response Time, PDSO16
RoHS : Compliant

6,889

MT28C128564W18DFW-F605P70KBBWT

Micron Technology Inc

Memory Circuit, 4MX16, CMOS, PBGA77

6,114

AD5645RBCPZ-REEL7

Analog Devices Inc

D/A Converter, 1 Func, Serial Input Loading, 3.5us Settling Time, PDSO10
RoHS : Compliant

5,873

AD5645RBRUZ

Analog Devices Inc

D/A Converter, 1 Func, Serial Input Loading, 3.5us Settling Time, PDSO14
RoHS : Compliant

5,601

HEDL-5645#A13

Broadcom Limited

Optoelectronic Device
RoHS : Compliant

5,450

MAXQ61HX-2564

Analog Devices (Maxim Integrated)

5,343

5962-9564002QDA

Texas Instruments

Operational Amplifier, 4 Func, 1000000uV Offset-Max, CMOS, CDFP14
RoHS : Not Compliant

4,733

MT28C128564W18DFW-F606P85TTWT

Micron Technology Inc

Memory Circuit, 4MX16, CMOS, PBGA77

2,771

PL375-64

Bel Fuse

RF Triaxial-TNC Connector, 1 Contact(s), Male, Cable Mount, Crimp Terminal, Plug
RoHS : Compliant

761

R5F564MGCDBG#21

Renesas Electronics Corporation

RISC Microcontroller, 32-Bit, FLASH, RX64M CPU, 120MHz, CMOS, PBGA176
RoHS : Compliant

673

564AAAA002114ABGR

Skyworks Solutions Inc

LVPECL Output Clock Oscillator, 0.2MHz Min, 3000MHz Max
RoHS : Compliant

627

56400001009

Littelfuse Inc

Fuses/Accessories
RoHS : Compliant

101

Waytek, Inc.

146564-91W

General Cable Technologies Corporation

12GA TXL Violet Cross-Link Automotive Wire XLPE -51C to 125C

250 : $0.4342
500 : $0.3292
1,000 : $0.2665
3,000 : $0.2335

14,000

280756-4

TE Connectivity

The TE Connectivity 280756-4 is a FASTIN-FASTON 375 series female quick disconnect terminal designed for reliable relay and harness connections. It accepts 1210 Ga. wire and mates with 0.375" (9.5 mm) tabs, providing secure electrical contact in high-current applications. Constructed from tin-plated phosphor bronze with an open-barrel F-crimp design, it ensures strong mechanical retention and excellent conductivity for automotive and industrial use.
RoHS : Compliant

10 : $0.7073
50 : $0.6807
100 : $0.6587
200 : $0.6233
500 : $0.6012
1,000 : $0.5835

3,122

2-1564514-1

TE Connectivity

10 Position AMP MCP 1.5/2.8 Female Receptacle disc way, no repl
RoHS : Compliant

1 : $3.1141
10 : $2.831
50 : $2.5926
100 : $2.2499
200 : $2.1158
500 : $2.0264

1,069

80610456446

12-10GA Heat Shrink Snap Spade #1/4 STUD

20 : $1.5863
50 : $1.4689
100 : $1.3298
200 : $1.2821
500 : $1.2298
1,000 : $1.1821

548

1-1564542-1

TE Connectivity

2 Position AMP MCP 6.3 Female Receptacle
RoHS : Compliant

1 : $3.848
10 : $3.5001
50 : $3.2264
100 : $2.812
200 : $2.6344
500 : $2.516

169

956-4107

Cole Hersee

Cole Hersee 956-4107 heavy-duty ignition switch is a 4-position ACC-Off-Ign/ACC-Start switch rated 10A accessory, 10A ignition, and 5A start at 12VDC. It features a 1" mounting stem, screw terminals, SAE J259 ignition protection, an O-ring stem seal, and a Hencol key.

1 : $82.16
5 : $76.62
10 : $73.35
20 : $67.12
50 : $64.88
100 : $61.62

100

Wuhan P&S

CAV25640VE-GT3

onsemi

RoHS : Compliant

1 : $0.88
100 : $0.56
500 : $0.47
1,000 : $0.43

87,000

564R60GAT10

Vishay Intertechnologies

564R 6KVDC 100PF ��20% X5F BULK E3
RoHS : Compliant

1 : $10.08
100 : $3.36
500 : $3.11
1,000 : $3.03

2,000

564L-TN3-R 販売店

リンク URL