 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
5BL-AF5-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 TME | TRS5-105BLRVU | YAGEO Corporation | Sensor: thermostat; SPST-NC; -10÷130°C; 50mm |
| 531 | |
| TRS5-115BLRU | YAGEO Corporation | Sensor: thermostat; SPST-NC; -20÷130°C |
| 50 | ||
| TRS5-125BLRU | YAGEO Corporation | Sensor: thermostat; SPST-NC; -20÷130°C |
| 50 | ||
| TRS5-115BLRVU | YAGEO Corporation | Sensor: thermostat; SPST-NC; -20÷130°C |
| 49 | ||
TS26-68-25-BL-260-SMT-TR | Same Sky | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/12VDC; SMT; LED; blue; 2.6N RoHS : Compliant |
| 0 | ||
| VSFK 8500 / 1 / 25 / BL | Schutzinger GmbH | Test lead: single; 16A; banana plug 4mm,both sides; Urated: 1kV |
| 0 | ||
| VSFK 8500 / 2.5 / 25 / BL | Schutzinger GmbH | Test lead: single; 32A; banana plug 4mm,both sides; Urated: 1kV |
| 0 | ||
| VSFK 8500 / SIL1 / 25 / BL | Schutzinger GmbH | Test lead: single; 16A; banana plug 4mm,both sides; Urated: 1kV |
| 0 | ||
| VSFK 8501 / 1 / 25 / BL | Schutzinger GmbH | Test lead: single; 16A; banana plug 4mm,both sides; Urated: 1kV |
| 0 | ||
| VSFK 8700 / 1 / 25 / BL | Schutzinger GmbH | Test lead: single; 16A; banana plug 4mm,both sides; Urated: 1kV |
| 0 | ||
| VSFK 8700 / 2.5 / 25 / BL | Schutzinger GmbH | Test lead: single; 32A; banana plug 4mm,both sides; Urated: 1kV |
| 0 | ||
| VSFK 8700 / SIL1 / 25 / BL | Schutzinger GmbH | Test lead: single; 16A; banana plug 4mm,both sides; Urated: 1kV |
| 0 | ||
| VSFK 8701 / 1 / 25 / BL | Schutzinger GmbH | Test lead: single; 16A; banana plug 4mm,both sides; Urated: 1kV |
| 0 | ||
| VSFK 8701 / 2.5 / 25 / BL | Schutzinger GmbH | Test lead: single; 32A; banana plug 4mm,both sides; Urated: 1kV |
| 0 | ||
| SW45 BLACK 25 FT | Alpha Wire | Spiral wrapping; Øbundle : 7.62mm; polyetylene; black; L: 7.62m |
| 0 | ||
 Avnet Americas | MMBZ5245BLT1G | onsemi | - Tape and Reel (Alt: MMBZ5245BLT1G) RoHS : Compliant |
| 579,000 | |
| ISOM5-175-B-L2 | Bourns Inc | TVS Varistor, 175 VAC, 225 VDC, IsoMOV, 470 V, Disc, Radial Leaded, 17 mm - Bulk (Alt: ISOM5-175-B-L2) RoHS : Compliant |
| 12,395 | ||
| ISOM5-175-B-L5 | Bourns Inc | IsoMOV 5KA 175Vrms Bulk In-Line - Bulk (Alt: ISOM5-175-B-L5) RoHS : Not Compliant |
| 9,823 | ||
| MMBZ5235BLT1G | onsemi | - Tape and Reel (Alt: MMBZ5235BLT1G) RoHS : Compliant |
| 6,000 | ||
| AB2025B-LW100-R | PUI Audio | Piezo Bender, 2.5 kHz, 0.08 UF, 500 ohm, 0.79" Dia, 0.01"" H" - Bag (Alt: AB2025B-LW100-R) RoHS : Compliant |
| 4,500 | ||
TLP185(BLL-TL,SE | Toshiba America Electronic Components | - Tape and Reel (Alt: TLP185(BLL-TL,SE) RoHS : Compliant |
| 3,000 | ||
| IS42VM16800H-75BLI | Integrated Silicon Solution Inc | - Trays (Alt: IS42VM16800H-75BLI) RoHS : Compliant | 490 | |||
| 2027-35-BLF | Bourns Inc | - Bulk (Alt: 2027-35-BLF) RoHS : Compliant |
| 400 | ||
| PI6C557-05BLE | Diodes Incorporated | Clock Generator, 200MHz, 3.135 V to 3.465 V, 4 Outputs, WTSSOP-20, -40 ?C to 85 ?C - Rail/Tube (Alt: PI6C557-05BLE) RoHS : Compliant |
| 56 | ||
V110C5C75BL | Vicor Power | - Boxed Product (Development Kits) (Alt: V110C5C75BL) RoHS : Not Compliant |
| 0 | ||
| V300C15C75BL2 | Vicor Power | - Boxed Product (Development Kits) (Alt: V300C15C75BL2) RoHS : Not Compliant |
| 0 | ||
| V375C15C75BL2 | Vicor Power | - Boxed Product (Development Kits) (Alt: V375C15C75BL2) RoHS : Not Compliant |
| 0 | ||
| V48C3V3T75BL | Vicor Power | - Boxed Product (Development Kits) (Alt: V48C3V3T75BL) RoHS : Not Compliant |
| 0 | ||
| UTP28X125BL | Panduit Corp | - Bulk (Alt: UTP28X125BL) RoHS : Compliant |
| 0 | ||
| UTP28X35BL | Panduit Corp | - Bulk (Alt: UTP28X35BL) RoHS : Compliant |
| 0 | ||
 Newark | NBNC75BLP7 | Neutrik USA Inc | Conn, Rf/Coax, Neutrik Nbnc75Blp7; |Neutrik NBNC75BLP7 RoHS : Compliant |
| 1,067 | |
| CLP_125_BLK | Visual Communications Company | Led Mounting Clip; No. Of Leds:1Leds; Holder Type:Clip; Product Range:-; Accessory Type:Led Mounting Clip; External Diameter:7.62Mm; External Length:6.1Mm; For Use With:5Mm Leds; Holder Colour:Black; Holder Material:Polycarbonate Rohs Compliant: Yes RoHS : Compliant |
| 820 | ||
| AT175 BLACK 50M X 50MM | Advance Tapes International Ltd | Tape, Polycloth, 50M X 50Mm; |Advance Tapes AT175 BLACK 50M X 50MM RoHS : Compliant |
| 103 | ||
| NBTC75BLI4 | Neutrik USA Inc | Rf Coaxial, Hd Bnc Plug, 75 Ohm, Cable; |Neutrik NBTC75BLI4 RoHS : Compliant |
| 66 | ||
| BIM2005/15-BLK/BLK | CamdenBoss Ltd | Enclosure Plast, Pcb Box, Abs, 50Mm; |Camdenboss BIM2005/15-BLK/BLK RoHS : Compliant |
| 54 | ||
| TRD815BL-50 | L-com Inc | Patch Cord, Cat 5E, 50Ft, Blue; Lan Cate |L-Com TRD815BL-50 RoHS : Compliant |
| 35 | ||
| TRDE695BLU-30 | L-com Inc | Enet Cbl, Cat6, Rj45 Plug To Rj45 Plug; |L-Com TRDE695BLU-30 RoHS : Compliant |
| 23 | ||
| TRD795BLK-7.5M | L-com Inc | Enet Cable, Cat7, Rj45 Plug-Plug, 7.5M; |L-Com TRD795BLK-7.5M RoHS : Compliant |
| 21 | ||
| TRD815RA15BLU-1 | L-com Inc | Ethernet Cbl, Cat5E; |L-Com TRD815RA15BLU-1 RoHS : Compliant |
| 20 | ||
| KUT35/BLUE | Elkay | Terminal Block, Din Rail, 2Pos, 1Awg; |Elkay KUT35/BLUE RoHS : Compliant |
| 15 | ||
| TRD795BLU-2M | L-com Inc | Enet Cbl, Cat7, Rj45 Plug To Rj45 Plug; |L-Com TRD795BLU-2M RoHS : Compliant |
| 14 | ||
| TRD695RA5BL-3 | L-com Inc | Ethernet Cbl, Cat6; |L-Com TRD695RA5BL-3 RoHS : Compliant |
| 6 | ||
| SBPE22-2525-BL-2 | TE Connectivity | Label, Vinyl, Blue, 25.4Mm X 95.3Mm; Available Until Stocks Are Exhausted |Te Connectivity Entrelec SBPE22-2525-BL-2 RoHS : Compliant |
| 4 | ||
| TRD695BLK-60 | L-com Inc | Enet Cord, Cat6, Rj45 Plug-Plug, 60'; |L-Com TRD695BLK-60 RoHS : Compliant |
| 3 | ||
| 3055 BL005 | Alpha Wire | Hook-Up Wire; |Alpha Wire 3055 BL005 RoHS : Compliant |
| 1 | ||
 RS | PUN-H-10X1,5-BL (197386) | Festo | POLYURETHANE TUBING, BLUE, 1 EA1 METER, 50M LENGTH, 10MMOD, TUV, FOOD-SAFE |
| 650 | |
| CLP_125_BLK | Visual Communications Company | CLP125BLK, CLP125 LED MOUNT FOR 5 MM PCB BOARD LEDS |
| 227 | ||
| 35-BLUE-3/4X66FT (7000006095) | 3M | TAPE, COLOR CODING, ELECTRICAL, VINYL, BLUE, 66 FT., 0.75 IN. |
| 55 | ||
| PEN-12X1,75-BL (551460) | Festo | TUBING, POLYETHYLENE, 12MM OD, BLUE, 50M COIL |
| 50 | ||
| PUN-H-F-10X1,5-BL (8153402) | Festo | POLYURETHANE TUBING, FOOD-SAFE, 10MM, BLUE, 1 EA 1 M |
| 50 | ||
| N001-005-BL | Tripp Lite | TRIPP LITE 5FT CAT5E / CAT5 350MHZ SNAGLESS PATCH CABLE RJ45 M/M BLUE 5 RoHS : Compliant |
| 46 | ||
| 365 BLACK CX/500 | Olympic Wire & Cable Corp | HOOK-UP WIRE, 14 AWG, 41X30, TC, PVC INS, BLACK, UL1015, UL1032, MTW, BC-5W2,TEW |
| 10 | ||
| LUCB05BL | Schneider Electric | TESYS 1.5 KW CONTROL MODULE, 24 VDC, 1.25, 5 A RoHS : Compliant |
| 9 | ||
| 364A595BL | Bomar Interconnect Products Inc | CONN, RF, BNC, RIGHT ANGLE, PCB JACK, 50OHMS, BODY:WHITE VALOX, CNTPLATING:GOLD RoHS : Compliant |
| 6 | ||
| 6715 BL001 | Alpha Wire | HOOK-UP WIRE, ECOWIRE, 6715, BLUE, 18 AWG, 16X30, MPPE INS, 600V, ECOWIRE SERIES |
| 3 | ||
| 365 BLACK CX/100 | Olympic Wire & Cable Corp | HOOK-UP WIRE, 14 AWG, 41X30, TC, PVC INS, BLACK, UL1015, UL1032, MTW, BC-5W2,TEW |
| 2 | ||
| M4C-1000-595-BL-WT | Brady Worldwide Inc | ALL-WEATHER VINYL LABELS 1 IN W X 25FT WHITE ON BLUE |
| 2 | ||
| TRD815BL-50 | L-com Inc | NETWORK CABLE ASSEMBLY, CAT 5E, RJ45/RJ45, BLUE, 50FT, TRD815 SERIES |
| 1 | ||
| 305 BLUE CX/100 | Olympic Wire & Cable Corp | HOOK-UP WIRE, 24 AWG, 19X36, SC, BLU TFE INS, -65 TO +200C, 600V |
| 1 | ||
| DP8005 BLACK (7100089475) | 3M | STRUCTURAL PLASTIC ADHESIVE, OFF BLK,3 MIN. WORK-TIME,2000 LB FORCE,45ML DUO-PAK |
| 1 | ||
 STMicroelectronics | Z00607MA 5BL2 | STMicroelectronics | 0.8A standard Triacs |
| 278 | |
 Bisco Industries | MPP-1605 BLACK | Caplugs | 4,548 | |||
| CEC-05 BLACK | Caplugs | 2,423 | ||||
| DOP-375 BLACK | Caplugs | 2,400 | ||||
| BPF-SI-415 BLACK | Caplugs | 850 | ||||
| SLV-105-12X.295 BLACK | Misc Wire Cable Tubing Sleeve | 500 | ||||
| SFSW10F24CPS15BL | MISC. INDUSTRIAL HRD | 200 | ||||
| 3075 BL005 | Alpha Wire | 200 | ||||
| 4635 BLACK 3/4" 100FT ROLL | Dunbar | 200 | ||||
| STB15-BLANK-1 | TE Connectivity | 146 | ||||
| HTSEC90-075-BLK | MISC. FITTINGS/ELBOWS | 100 | ||||
| 2815-BLK | MISC. VIBRATION MOUNTS & BUMPERS | 81 | ||||
| RD1-35-BLUE | MISC. VIBRATION MOUNTS & BUMPERS | 50 | ||||
| MPC45D55-BLK | MISC. INDUSTRIAL CONNECTORS | 40 | ||||
| C6ASLSS-15BLU | MISC CABLE ASSEMBLY | 16 | ||||
| DCC-15 BLACK | Caplugs | 8 | ||||
 Rochester Electronics | SZMMBZ5245BLT3G | onsemi | Zener Diode Single 15V 225mW SOT-23-3 T/R RoHS : Compliant |
| 11,976 | |
| MMBZ5255BLT1G | onsemi | Zener Diode Single 5.1V 225mW SOT-23-3 T/R RoHS : Compliant |
| 30,284 | ||
| SZMMBZ5235BLT1G | onsemi | Zener Diode Single 6.8V 225mW SOT-23-3 T/R RoHS : Compliant |
| 777,000 | ||
| SZMMBZ5245BLT1G | onsemi | Zener Diode Single 15V 225mW SOT-23-3 T/R RoHS : Compliant |
| 59,635 | ||
AM27S25/BLA | AMD | PROM 4kbit 512 x 8 4.5V - 5.5V Parallel 55ns 24-DIP RoHS : Not Compliant |
| 336 | ||
| LM5575BLDT/NOPB | National Semiconductor Corporation | Switching Regulator RoHS : Compliant |
| 22 | ||
HZ5BLL-E | Renesas Electronics Corporation | Zener Diode Single 4.8V 250mW DO35 RoHS : Compliant |
| 10,000 | ||
| HZ5BLLTA-E | Renesas Electronics Corporation | Zener Diode Single 4.8V 250mW DO35 RoHS : Compliant |
| 4,500 | ||
| HZ5BLLTD-E | Renesas Electronics Corporation | Zener Diode, 0.25W RoHS : Compliant |
| 20,000 | ||
| HZK5BLL-JTL | Renesas Electronics Corporation | Zener Diode Single 4.8V 250mW MELF RoHS : Not Compliant |
| 375,000 | ||
| HZK5BLL-JTR | Renesas Electronics Corporation | Zener Diode Single 4.8V 250mW MELF T/R RoHS : Compliant |
| 19,177 | ||
| HZS5BLL-JTA | Renesas Electronics Corporation | Zener Diode Single 4.8V 250mW DO34 |
| 5,000 | ||
| HZU5BLL-JTLF | Renesas Electronics Corporation | Zener Diode Single 4.8V 150mW SOD323 RoHS : Compliant |
| 3,000 | ||
| HZU5BLL-JTLF-E | Renesas Electronics Corporation | Zener Diode Single 4.8V 150mW SOD323 RoHS : Compliant |
| 99,000 | ||
| UC1825BL883B | Unitrode Corporation | Dual marked (5965-87681032A) RoHS : Not Compliant |
| 234 | ||
 Sager | 215-BL/ON-OFF/POLY | Carling Technologies | Toggle Switches 215BL/ONOFF/POLY |
| 0 | |
| AT34/100/45/BLY | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| AT42/125/S45/BLB | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| UJRBU65BL | Panduit Corp | Ethernet Cables / Networking Cables Zone Cord, Cat 6 UTP Solid Riser Blue Ca RoHS : Compliant | 0 | |||
| UTP28X125BL | Panduit Corp | Ethernet Cables / Networking Cables Cat 6A 28AWG UTP Patch Cord, CM/LSZH, Bl RoHS : Compliant |
| 0 | ||
| UTP28X35BL | Panduit Corp | Ethernet Cables / Networking Cables Cat 6A 28AWG UTP Patch Cord, CM/LSZH, Bl RoHS : Compliant |
| 0 | ||
| UTP6ASD125BL | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A (SD), Black UT RoHS : Compliant | 0 | |||
| UTP6ASD55BL | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A (SD), Black UT RoHS : Compliant | 0 | |||
| CX06M-0000-S5BL | e10cel SYS | COOLX 600W FANLESS MEDICAL COOLPAC, RUGGEDIZED AND CONFORMAL COATING, IEC TERMINAL, LOW LEAKAGE (150UA), 4 SLOTS, 5V AUX WITH LID , MUST BE USED WITH COOLX MOD |
| 0 | ||
| HLCD-10-20.85-BL-TR-1 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
| SRX25-BLK-1 | Kycon Inc | STRAIN RELIEF 25P BLK ROHS COMPLIANT |
| 0 | ||
| SY4S05-BLACK | IDEC Corporation | Relay Sockets & Hardware BLACK W/O MARK TAIWAN | 0 | |||
| 215-BL | Carling Technologies | Toggle Switches 215BL |
| 0 | ||
| LS1511-55-BL-BL-012 | Carling Technologies | Rocker Switches LS151155BLBL012 RoHS : Compliant |
| 0 | ||
| UJPBU35BL | Panduit Corp | Ethernet Cables / Networking Cables Zone Cord, Cat 6 UTP Solid Plenum Blue C RoHS : Compliant | 0 | |||
 Ameya Holding Limited | MMBZ5245BLT1G | onsemi | MMBZ5245BL Series 225 mW 10 mA 15 V SMT Zener Voltage Regulator - SOT-23-3 RoHS : Compliant | 120,000 | ||
| IS62WV25616BLL55BLI | Integrated Silicon Solution Inc | 2,032 | ||||
| IS62WV102416EBLL-45BLI | Infineon Technologies AG | 248 | ||||
| TLP785BL | Toshiba America Electronic Components | 128 | ||||
IS62WV51216BLL-55BLI | Integrated Silicon Solution Inc | 8MB, LOW POWER/POWER SAVER,ASYNC,512K X 16,55NS,2.5V~3.6V,48 BALL MBGA (7.2 RoHS : Compliant | 10 | |||
 ComSIT USA | S7825BL | U LINE | AVAILABLE EU | 86 | ||
ComSIT USA | Z00607MA5BL2 | STMicroelectronics | 0.8A STANDARD TRIAC 4 Quadrant Logic Level TRIAC, 600V V(DRM), 0.8A I(T)RMS, TO-92 RoHS : Compliant | 8,000 | ||
| MMA020415BL13K7D | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 6,000 | |||
| HSMP3895BLKG | Avago Technologies | SURFACE MOUNT RF PIN SWITCH DIODE Pin Diode, 100V V(BR), Silicon RoHS : Compliant | 5,800 | |||
| HSMS2865BLKG | Avago Technologies | SURFACE MOUNT MICROWAVE SCHOTTKY DETECTOR DIODE Mixer Diode, C Band, Silicon RoHS : Compliant | 4,600 | |||
| HSMS2825BLKG | Avago Technologies | SURFACE MOUNT RF SCHOTTKY BARRIER DIODE Mixer Diode, C Band, Silicon RoHS : Compliant | 4,374 | |||
| MMU010225BL6K19D | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 3,000 | |||
| MMU010225BL402RF | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 3,000 | |||
| MMA020415BL402RB | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 3,000 | |||
| TLP185BLLTPLEO | Toshiba America Electronic Components | PHOTOCOUPLER GAAS IRED AND PHOTO-TRANSISTOR Transistor Output Optocoupler, 1-Element, 3750V Isolation RoHS : Compliant | 2,135 | |||
| HSMS2855BLKG | Avago Technologies | SURFACE MOUNT ZERO BIAS SCHOTTKY DETECTOR DIODE Mixer Diode, Zero Barrier, L Band, Silicon RoHS : Compliant | 1,400 | |||
| IS62WV12816BLL55BLI | Integrated Silicon Solution Inc | 128K X 16 LOW VOLTAGE, ULTRA LOW POWER CMOS STATIC RAM Standard SRAM, 128KX16, 55ns, CMOS, PBGA48 RoHS : Compliant | 346 | |||
| ACPM9005BLK | Avago Technologies | CDMA BC0 and BC10, UMTS B5, LTEB26 GPIO APT PA Power Amplifier Module RF and Baseband Circuit RoHS : Compliant | 300 | |||
| IS42S32160A75BLITR | Integrated Silicon Solution Inc | 4M WORDS X 32 BITS X 4 BANKS (512-MBIT) SYNCHRONOUS DYNAMIC RAM Synchronous DRAM, 16MX32, 6ns, CMOS, PBGA90 RoHS : Compliant | 250 | |||
| HSMS2805BLKG | Avago Technologies | SURFACE MOUNT RF SCHOTTKY BARRIER DIODE Mixer Diode, Silicon RoHS : Compliant | 200 | |||
| IS62WV102416EBLL45BLI | Integrated Silicon Solution Inc | Standard SRAM, 1MX16, 45ns, CMOS, PBGA48 RoHS : Not Compliant | 156 | |||
 Interstate Connecting Components | STB15-BLANK-5 | TE Connectivity | 8-1768039-4 |
| 37 | |
| 3055 BL005 | Alpha Wire | 3055 BLUE 100 FT |
| 22 | ||
| 39-01-2045-BLU | Molex | 4CKT RECEPTACLE HOUSING DYED BLUE |
| 1 | ||
| SDHH15BL | Cinch Connectivity Solutions | D-SUB |
| 0 | ||
| ITS3106AGG36-6SN2N5-BL | Glenair Inc | 0 | ||||
| AB-BD05BL-BDBL-QD002 | Amphenol LTW Technology | X-LOK, STANDARD SIZE, PLASTIC, OVERMOLDED | 0 | |||
| AT04-4P-PM05BLK | Amphenol Sine Systems | 4 POSITION PANEL MOUNT RECEPTA | 0 | |||
| 171-008-20P-P5BL-513 | Glenair Inc | MICRO-D CONNECTOR | 0 | |||
| AB-CB05BL-CBBL-QD004 | Amphenol LTW Technology | X-LOK, MIDDLE SIZE, PLASTIC, 1 OVERMOLDED | 0 | |||
| AB-CB05BL-CBBR-QD010 | Amphenol LTW Technology | X-LOK, MIDDLE SIZE, PLASTIC, 1 OVERMOLDED | 0 | |||
| SDHH-25BLL | Cinch Connectivity Solutions | HOOD,25 POS, LCO (7024925026) | 0 | |||
| AT04-3P-PM05BLU | Amphenol Sine Systems | Receptacle, 3 way, flange, blu | 0 | |||
| TP-105BL | Amphenol Nexus | Telephone Plug 5 conductors | 0 | |||
| TP-105BL | Amphenol Nexus | 0 | ||||
| ITS4106RGG20-2SB0N5-BL | Glenair Inc | 0 | ||||
 PEI Genesis | CPA100-0125-BLK-STK4FT | DSG-Canusa |
| 2,904 | ||
| DCC.16.25B.LAG | LEMO connectors | RoHS : Compliant |
| 9 | ||
| 21A1015BL1606CN | SOURIAU-SUNBANK |
| 0 | |||
| CPA100-0375-BLK | DSG-Canusa |
| 0 | |||
| 04E00055-BL06 | SOURIAU-SUNBANK |
| 0 | |||
| CPA100-0125-BLK | DSG-Canusa |
| 0 | |||
| CPX100-0375-BLK | DSG-Canusa |
| 0 | |||
| DERAY-V25-0375-BLK-SP200 | DSG-Canusa |
| 0 | |||
| 04E00055-BL20 | SOURIAU-SUNBANK |
| 0 | |||
| 21A1015BL1404CN | SOURIAU-SUNBANK |
| 0 | |||
| 04E00055-BL14 | SOURIAU-SUNBANK |
| 0 | |||
| 04E00055-BL22 | SOURIAU-SUNBANK |
| 0 | |||
| 21A1015BL1003CN | SOURIAU-SUNBANK |
| 0 | |||
| CPA100-0375-BLK-SP200 | DSG-Canusa |
| 0 | |||
| SDH-25BLL | Cinch Connectivity Solutions |
| 0 | |||
 PUI | AB2025B-LW100-R | PUI Audio | 1,000 | |||
 Rutronik | TLP785(BL-TP6,F(C | Toshiba America Electronic Components | COUPLER SMD4 200-600% 5mA 80V RoHS : Compliant |
| 16,000 | |
| EPDX00KY3005BLUE | LYNXEO | Wire Cable KY30 05 BLUE RoHS : Compliant |
| 4,250 | ||
| TLP185(BLL-TL,SE(T | Toshiba America Electronic Components | COUPLER SO-6 200-400% 5mA RoHS : Compliant |
| 3,000 | ||
 Chip 1 Exchange | DS-02005-B(LV) | Littelfuse Inc | INSTOCK | 39,000 | ||
| HZ5BLLTA-E | INSTOCK | 20,000 | ||||
| IS65WV12816BLL-55BLA3 | Integrated Silicon Solution Inc | INSTOCK RoHS : Compliant | 7,388 | |||
| MMA0204-25BL99K+-0,1% | Vishay Intertechnologies | INSTOCK | 5,518 | |||
| NBNC75BLP9-D | NTRK | INSTOCK | 4,290 | |||
| MMA0204-50-5%-BLR33 | INSTOCK | 2,467 | ||||
| IS65WV12816BLL-55BLA3 | INSTOCK | 1,888 | ||||
| 88E6065B##-LAJ1C000 | Marvell Technology Group Ltd | INSTOCK | 1,541 | |||
| MMA020425BL05% | Vishay Beyschlag | INSTOCK | 1,200 | |||
| MMA0204-25BL100K+-0,1% | Vishay BCcomponents | INSTOCK | 729 | |||
| MMA0204-25BL261K+-0,1% | Vishay Beyschlag | INSTOCK | 707 | |||
| BU9103R25BL | INSTOCK | 623 | ||||
| MMA0204-25BL100K+-0,1% | Vishay Beyschlag | INSTOCK | 280 | |||
FT245BL | FTDI Chip | INSTOCK RoHS : Compliant | 14 | |||
| 1SCU/W701-24/CAT5-BL/REV.1 | INSTOCK | 1 | ||||
 Avnet Abacus | 15BL5822 | ITT Interconnect Solutions | Connector Accessories Individual Wire Seals Blue (Alt: 121668-0033) RoHS : Compliant | 20,000 | ||
| 2027-15-BLF | Bourns Inc | (Alt: 2027-15-BLF) RoHS : Compliant | 0 | |||
| 2036-15-BLF | Bourns Inc | Gas Discharge Tube GDT MiniTRIGARD 2036 150 V Axial Leaded 20 kA 500 V (Alt: 2036-15-BLF) RoHS : Compliant | 0 | |||
| 2045-35-BLF | Bourns Inc | Gas Discharge Tube GDT 2045 350 V Axial Leaded 15 kA 900 V (Alt: 2045-35-BLF) RoHS : Compliant | 0 | |||
| 2027-25-BLF | Bourns Inc | (Alt: 2027-25-BLF) RoHS : Compliant | 0 | |||
| V375C12H75BL | Vicor Power | (Alt: V375C12H75BL) RoHS : Not Compliant | 0 | |||
| DX0505/BL/12 | Bulgin | (Alt: DX0505/BL/12) RoHS : Compliant | 0 | |||
| V300C28C75BL | Vicor Power | Module DCDC SingleOut 28V 268A 75W Screw MountThrough Hole 7Pin Quarter Brick (Alt: V300C28C75BL) RoHS : Not Compliant | 0 | |||
| TRS5-65BLRVU | KEMET Corporation | Thermal Reed Switch 25C Analog Flange Mount 2Pin Axial Box (Alt: TRS5-65BLRVU) RoHS : Compliant | 0 | |||
| V375C3V3H75BL | Vicor Power | (Alt: V375C3V3H75BL) RoHS : Not Compliant | 0 | |||
| P295BL332M500A | KEMET Corporation | Safety Capacitor Metallized Paper Radial Box 2 Pin 3300 pF 20 Y1 Through Hole 500 VAC (Alt: P295BL332M500A) RoHS : Compliant | 0 | |||
| ISOM5-175-B-L2 | Bourns Inc | TVS Varistor 175 VAC 225 VDC IsoMOV 470 V Disc Radial Leaded 17 mm (Alt: ISOM5-175-B-L2) RoHS : Compliant | 0 | |||
| P295BL252M500A | KEMET Corporation | Safety Capacitor Metallized Paper Radial Box 2 Pin 2500 pF 20 Y1 Through Hole 500 VAC (Alt: P295BL252M500A) RoHS : Compliant | 0 | |||
| AB2065B-LW100-R | PUI Audio | Piezo Bender 65 kHz 0014 UF 500 ohm 079 Dia 002 H (Alt: AB2065B-LW100-R) RoHS : Compliant | 0 | |||
| BNC(75)-BLR-PC-12G(02) | Hirose Electric Co Ltd | (Alt: CL0302-0081-0-02) RoHS : Compliant | 0 | |||
Avnet Asia | 10129382-924005BLF | Amphenol Corporation | FCI10129382-924005BLF BOARD TO BOARD CON (Alt: 10129382-924005BLF) RoHS : Compliant | 19,200 | ||
| DP1608-A2455BLT/LF | Advanced Ceramic X Corporation | (Alt: DP1608-A2455BLT/LF) RoHS : Compliant |
| 4,040 | ||
| IS62WV12816FBLL-45BLI | Integrated Silicon Solution Inc | SRAM Chip 2M-bit 128k-bit x 16bit 45ns 48-Pin VFBGA (Alt: IS62WV12816FBLL-45BLI) RoHS : Compliant | 0 | |||
| IS46R16160F-5BLA2-TR | Integrated Silicon Solution Inc | ISNIS46R16160F-5BLA2-TR DDR 256M BGA60 - (Alt: IS46R16160F-5BLA2-TR) RoHS : Compliant | 0 | |||
| TLP185(BLL-TL,SE(T | Toshiba America Electronic Components | (Alt: TLP185(BLL-TL,SE(T) RoHS : Compliant | 0 | |||
| TLP185(BL-TPL,SE(T | Toshiba America Electronic Components | (Alt: TLP185(BL-TPL,SE(T) RoHS : Compliant | 0 | |||
| TLP185(BLL-TR,SE(T | Toshiba America Electronic Components | (Alt: TLP185(BLL-TR,SE(T) RoHS : Compliant | 0 | |||
| IS62WV6416FBLL-45BLI | Integrated Silicon Solution Inc | SRAM Chip Asynchronous Single 3V 1Mbit 64K X 16 45ns 48-Pin VFBGA (Alt: IS62WV6416FBLL-45BLI) RoHS : Compliant | 0 | |||
| T1200B-45BLI-TR | Integrated Silicon Solution Inc | SRAM 4MB (256K X 16) ASYNC SRAM (Alt: T1200B-45BLI-TR) RoHS : Compliant | 0 | |||
| IS62WV20488FBLL-45BLI | Integrated Silicon Solution Inc | (Alt: IS62WV20488FBLL-45BLI) RoHS : Compliant | 0 | |||
| TLP785(BLL,F(C | Toshiba America Electronic Components | (Alt: TLP785(BLL,F(C) RoHS : Compliant | 0 | |||
| MMBZ5235BLT1G | onsemi | (Alt: MMBZ5235BLT1G) RoHS : Compliant | 0 | |||
| SZMMBZ5245BLT1G | onsemi | (Alt: SZMMBZ5245BLT1G) RoHS : Compliant | 0 | |||
IS62WV102416EBLL-45BLI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 3.3V 16M-Bit 1M x 16 45ns 48-Pin VFBGA T/R (Alt: IS62WV102416EBLL-45BLI-TR) RoHS : Compliant | 0 | |||
| MMBZ5245BLT1G | onsemi | (Alt: MMBZ5245BLT1G) RoHS : Compliant |
| 0 | ||
 Avnet Silica | SZMMBZ5235BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5235BLT1G) RoHS : Compliant | 6,000 | ||
| IS62WV10248BLL-55BLI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 3V 8MBit 1M x 8 55ns 48Pin MiniBGA TR (Alt: IS62WV10248BLL-55BLI-TR) RoHS : Compliant | 5,000 | |||
| IS62WV102416EBLL-55BLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 25V33V 16MBit 1M x 16 55ns 48Pin VFBGA (Alt: IS62WV102416EBLL-55BLI) RoHS : Compliant | 480 | |||
| IS43LD16640D-25BL | Integrated Silicon Solution Inc | (Alt: IS43LD16640D-25BL) RoHS : Compliant | 0 | |||
| IS43LD32320C-25BLI | Integrated Silicon Solution Inc | Mobile LPDDR2 S4 SDRAM 1Gb 32Mx32 400MHz 25ns 134Pin FBGA Tray (Alt: IS43LD32320C-25BLI) RoHS : Compliant | 0 | |||
| IS64WV6416BLL-15BLA3 | Integrated Silicon Solution Inc | SRAM Chip Async Single 33V 1MBit 64K x 16 15ns 48Pin MiniBGA (Alt: IS64WV6416BLL-15BLA3) RoHS : Compliant | 0 | |||
| IS62WV10248BLL-55BLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 33V 8MBit 1M x 8 55ns 48Pin MiniBGA (Alt: IS62WV10248BLL-55BLI) RoHS : Compliant | 0 | |||
| IS46LQ32128A-125BLA2 | Integrated Silicon Solution Inc | 4Gb LPDDR4 SDRAM (Alt: IS46LQ32128A-125BLA2) RoHS : Compliant | 0 | |||
| IS62WV5128EBLL-45BLI | Integrated Silicon Solution Inc | (Alt: IS62WV5128EBLL-45BLI) RoHS : Compliant | 0 | |||
| IS42SM16800J-75BLI-TR | Integrated Silicon Solution Inc | DRAM 128M 33V Mobile SDRAM 8Mx16 133Mhz 54 ball BGA 8mmx8mm RoHS IT TR (Alt: IS42SM16800J-75BLI-TR) RoHS : Compliant | 0 | |||
| IS66WVE2M16TBLL-55BLI | Integrated Silicon Solution Inc | (Alt: IS66WVE2M16TBLL-55BLI) RoHS : Compliant | 0 | |||
| IS62WV20488EBLL-55BLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 25V33V 16MBit 2M x 8 55ns 48Pin TFBGA (Alt: IS62WV20488EBLL-55BLI) RoHS : Compliant | 0 | |||
| IS62WV12816BLL-55BLI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 33V 2MBit 128K x 16 55ns 48Pin TFBGA TR (Alt: IS62WV12816BLL-55BLI-TR) RoHS : Compliant | 0 | |||
IS62WV20488EBLL-45BLI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 33V 16MBit 2M x 8 45ns 48Pin TFBGA TR (Alt: IS62WV20488EBLL-45BLI-TR) RoHS : Compliant | 0 | |||
| IS65WV12816BLL-55BLA3-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 33V 2MBit 128K x 16 55ns 48Pin MiniBGA TR (Alt: IS65WV12816BLL-55BLA3-TR) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | IC-SN85BLCCSN1C | iC-Haus | 850 nm IR LED |
| 0 | |
| IC-SD85 BLCC SD1C | iC-Haus | IR LED, 850 nm, with lens, SMT compatible |
| 0 | ||
 Component Electronics, Inc | MMBZ5245BLT1G | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,940 | |
| NBNC75BLP7-D | Neutrik USA Inc | IN STOCK SHIP TODAY |
| 609 | ||
| NBTC75BLI4 | Neutrik USA Inc | IN STOCK SHIP TODAY |
| 548 | ||
| NBNC75BLP9 | Neutrik USA Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 127 | ||
| NBNC75BLP9-D | Neutrik USA Inc | IN STOCK SHIP TODAY |
| 77 | ||
| 15BL8MX | Switchcraft Conxall | IN STOCK SHIP TODAY |
| 27 | ||
| MMBZ5255BLT1G | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 16 | ||
| 5BLH | Wiremold | IN STOCK SHIP TODAY | 11 | |||
| W211-125-BLACK | Sifam Meters | IN STOCK SHIP TODAY | 2 | |||
| W151-125-BLACK | Sifam Meters | IN STOCK SHIP TODAY | 2 | |||
| 2875-BL005 | Alpha Wire | IN STOCK SHIP TODAY | 1 | |||
| F39-JCR5B-L | OMRON Corporation | IN STOCK SHIP TODAY |
| 1 | ||
| PR175B1675BLK | L-com Inc | IN STOCK SHIP TODAY |
| 1 | ||
| S111-125-BLACK | Sifam Meters | IN STOCK SHIP TODAY | 1 | |||
| DTZK-15-BLK | MH Connectors | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | CL-5-BLPT-4.00-C | Carr Lane Manufacturing Co Inc | BALL LOCK PIN |
| 111 | |
| DSI-3250-35-BL | Sugatsune Kogyo Co Ltd | BLACK SS SLIDING DOOR HANDLE | 0 | |||
| SN-95/BL | Sugatsune Kogyo Co Ltd | 0 | ||||
| DSI-4251-45-BL | Sugatsune Kogyo Co Ltd | SS SLIDING DOOR HANDLE 44.5MM | 0 | |||
| UTA-105BL | Sugatsune Kogyo Co Ltd | RECESSED PULL WITH VENTILATOR, | 0 | |||
| 38860-25/BLK | Sugatsune Kogyo Co Ltd | 0 | ||||
| DSH-P5-25-BL | Sugatsune Kogyo Co Ltd | COAT HOOK, BLACK FINISH | 0 | |||
| HK-CH35-BL | Sugatsune Kogyo Co Ltd | COUNTER HOOK BLACK | 0 | |||
| DSI-4254-100-45-BL | Sugatsune Kogyo Co Ltd | BLACK SS SLIDING DOOR HANDLE | 0 | |||
| 38845-25/BLK | Sugatsune Kogyo Co Ltd | ALUMINUM FOLDING BRACKET, BLAC | 0 | |||
| DSI-4258-45-BL | Sugatsune Kogyo Co Ltd | BLACK SS SLIDING DOOR HANDLE | 0 | |||
| OVN-5/BLK | Sugatsune Kogyo Co Ltd | ORDER PARTS SEPARATELY R L | 0 | |||
| DSI-3250-45-BL | Sugatsune Kogyo Co Ltd | BLACK SS SLIDING DOOR HANDLE | 0 | |||
| HG-MF15-BL | Sugatsune Kogyo Co Ltd | 0 | ||||
| DSI-4254S300-45-BL | Sugatsune Kogyo Co Ltd | SS HANDLE H300, W45, D50 | 0 | |||
 EBV Elektronik | TLP185(BLL-TL,SE(T | Toshiba America Electronic Components | Optocoupler DCIN 1CH Transistor With Base DCOUT 4Pin SOIC TR (Alt: TLP185(BLL-TL,SE(T) RoHS : Compliant | 24,000 | ||
| MMBZ5245BLT1G | onsemi | Zener Single Diode 15 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: MMBZ5245BLT1G) RoHS : Compliant | 21,000 | |||
| TLP785(BLL-TP6,F(C | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 4Pin PDIP SMD TR (Alt: TLP785(BLL-TP6,F(C) RoHS : Compliant | 8,000 | |||
| TLP185(BLL-TR,SE(T | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 4Pin SO TR (Alt: TLP185(BLL-TR,SE(T) RoHS : Compliant | 3,000 | |||
| TLP785(BLL,F(C | Toshiba America Electronic Components | Optocoupler DCIN 1CH Transistor DCOUT 4Pin DIP (Alt: TLP785(BLL,F(C) RoHS : Compliant | 1,200 | |||
| MMBZ5255BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: MMBZ5255BLT1G) RoHS : Compliant | 0 | |||
| MMBZ5235BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: MMBZ5235BLT1G) RoHS : Compliant | 0 | |||
| ACPF-W065-BLK | Broadcom Limited | (Alt: ACPF-W065-BLK) RoHS : Compliant | 0 | |||
| 75K72100S125BL | Broadcom Limited | Communication ICs (Alt: 75K72100S125BL) RoHS : Compliant | 0 | |||
| SZMMBZ5245BLT3G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5245BLT3G) RoHS : Compliant | 0 | |||
| SZMMBZ5235BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5235BLT1G) RoHS : Compliant | 0 | |||
| SZMMBZ5245BLT1G | onsemi | Zener Single Diode 15 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: SZMMBZ5245BLT1G) RoHS : Compliant | 0 | |||
| TLP385(BL-TPL,E(T | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 4Pin SO6L Emboss TR (Alt: TLP385(BL-TPL,E(T) RoHS : Compliant | 0 | |||
| TLP785(BL-TP6,F(C | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 4Pin PDIP SMD TR (Alt: TLP785(BL-TP6,F(C) RoHS : Compliant | 0 | |||
| TLP185(BL-TPL,SE(T | Toshiba America Electronic Components | (Alt: TLP185(BL-TPL,SE(T) RoHS : Compliant | 0 | |||
 Flip Electronics | MMBZ5235BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 27,000 | ||
| SZMMBZ5225BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 27,000 | |||
| MMBZ5245BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 24,000 | |||
| SZMMBZ5235BLT3G | onsemi | Stock, Ship Today RoHS : Compliant | 9,600 | |||
| SZMMBZ5235BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 2,372 | |||
| MMBZ5225BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 700 | |||
 Master Electronics | CLP_125_BLK | Visual Communications Company | PLC Clip 5mm Black RoHS : Compliant |
| 2,705 | |
| 2027-15-BLF | Bourns Inc | Gas Discharge Tubes 150VDC 10KADC 10AAC 1pF Axial Thru-Hole RoHS : Compliant |
| 679 | ||
| NBNC75BLP7 | Neutrik USA Inc | rearTWIST HD BNC Cable Connectors - The rearTWIST HD BNC cable connector offers a true 75 Ω design and is perfectly suitable for HD applications. The patented rearTWIST boot guarantees easy access even in high density applications and offers color coding. RoHS : Compliant |
| 519 | ||
| 1855-BLACK-1000 | Alpha Wire | Hook-up Wire 22AWG 1.27mm Tinned Copper Black 600V - 304.8m (1000ft)/Spool RoHS : Compliant |
| 2 | ||
| 1805-BLACK-1000 | Alpha Wire | Hook-up Wire 30AWG 0.5mm Solid Silver Plated Copper Black - 304.8m (1000ft)/Spool RoHS : Compliant |
| 1 | ||
| 215-BL/ON-OFF/POLY | Carling Technologies | Switch Toggle ON OFF SPST Toggle Screw 20A 250VAC 372.85VA Panel Mount with Snap-In RoHS : Compliant |
| 0 | ||
| AT34/100/45/BLY | Thomas & Betts | Adaptalok ATS - 45 Degree Conduit Fitting - Fixed External Male Thread - Nominal Conduit Size 34mm - 1 Inch NPT Thread - Polyamide (Nylon) 66/TPE - Black with Yellow Elastomer. RoHS : Compliant |
| 0 | ||
| AT42/125/S45/BLB | Thomas & Betts | Adaptalok ATS - 45 Degree Conduit Fitting - Swivel Male Thread - Conduit 42mm - 1-1/4 Inch NPT Thread - Black/Blue Elastomer. RoHS : Compliant |
| 0 | ||
| CCSFPQ275BL | OMRON Industrial Automation | LOW ANGLED SQ DIFFUSED RoHS : Compliant |
| 0 | ||
| HLCD-10-20.85-BL-TR-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| G3JT205BLCDC1224NC | OMRON Industrial Automation | SSR Controller RoHS : Compliant |
| 0 | ||
| STB15-BLANK-5 | TE Connectivity | Snap on wire markers - Halogen free - Temp -40 to 106°C RoHS : Compliant |
| 0 | ||
| 215-BL | Carling Technologies | Switch Toggle ON OFF SPST Toggle Screw 20A 250VAC 372.85VA Panel Mount with Snap-In RoHS : Compliant |
| 0 | ||
| 215-BL/ON-OFF-SC-BULK | Carling Technologies | MAAOA/215-SERIES TOGGLE SW RoHS : Compliant |
| 0 | ||
| LS1511-55-BL-BL-012 | Carling Technologies | LS-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C8815/BL | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/BL, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/BL is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/BL can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BL coax. | 490 | ||
| PE3C8875/BL | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BL, RF Cable Type: Belden 1855A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-BL Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-BL coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8875/BL, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8875/BL is built with Belden 1855A-BL which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-BL coax. | 255 | |||
| PE3C8815/BL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/BL-12, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/BL-12 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/BL-12 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax. |
| 209 | ||
| PE3C8875/BL-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BL, RF Cable Type: Belden 1855A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BL-300, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BL-300 is built with Belden 1855A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BL coax. |
| 51 | ||
| PE3C8875/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BL, RF Cable Type: Belden 1855A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BL-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BL-120 is built with Belden 1855A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-BL coax. |
| 51 | ||
| PE3C8875/BL-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BL, RF Cable Type: Belden 1855A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BL-72, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BL-72 is built with Belden 1855A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BL coax. |
| 51 | ||
| PE3C8815/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/BL-120, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/BL-120 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/BL-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax. |
| 44 | ||
| PE3C8815/BL-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/BL-300, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/BL-300 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/BL-300 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-BL coax. |
| 17 | ||
| PE3C8745/BL-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/BL-300, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/BL-300 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/BL-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-BL coax. |
| 0 | ||
| PE3C8745/BL-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 36 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/BL-36, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/BL-36 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/BL-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-BL coax. |
| 0 | ||
| PE3C8745/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/BL-120, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/BL-120 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/BL-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax. |
| 0 | ||
| PE3W05155/BL/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 2.92mm Female Bulkhead to N Male Cable Using PE-P086HF Coax with HeatShrink., Pasternack’s PE3W05155/BL/HS 2.92mm female bulkhead to type N male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a type N cable connection on the other. Our 2.92mm to type N cable assembly has a female gender on end 1 and a male on end 2. PE3W05155/BL/HS can also be known as a 2.92mm jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W05155/BL/HS RF cable has an FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This PE3W05155/BL/HS 2.92mm jack to type N plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05155/BL/HS can also be used in the other direction and will be a type N male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. This 2.92mm jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements. | 0 | |||
| PE3C8745/BL-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/BL-72, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/BL-72 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/BL-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-BL coax. |
| 0 | ||
| PE3W05035/BL/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to Mini SMP Female Right Angle Cable Using PE-P047HF Coax with HeatShrink, LF Solder., Pasternack’s PE3W05035/BL/HS right angle mini SMP female to right angle mini SMP female RF cable assembly using PE-P047HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to mini SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle mini SMP cable connection on one end and a right angle mini SMP cable connection on the other. Our mini SMP to mini SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W05035/BL/HS can also be known as a right angle mini SMP jack to right angle mini SMP jack cable assembly and will be shipped the same day as it is purchased. This high flex RF cable assembly has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05035/BL/HS RF cable has an FEP jacket of 0.060-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. The high flex RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our right angle mini SMP female to right angle mini SMP female cable has a maximum VSWR of 1.4:1. This PE3W05035/BL/HS mini SMP jack to mini SMP jack cable assembly is built with PE-P047HF, which is a high flex coax type. The Pasternack high flex mini SMP cable assembly is manufactured with right angle mini SMP to right angle mini SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This mini SMP right angle jack to mini SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to mini SMP cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to mini SMP RF cable assembly as per your requirements. | 0 | |||
| PE3C8745/BL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/BL-12, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/BL-12 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/BL-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-BL coax. |
| 0 | ||
 Venkel Ltd. | PWCR0805-BL-10R7FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;10.7R;�1% RoHS : Compliant | 0 | ||
| PWCR0805-BL-1100FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;110R;�1% RoHS : Compliant | 0 | |||
| PWCR0805-BL-1210DT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;121R;�0.5% RoHS : Compliant | 0 | |||
| PWCR0805-BL-1470FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;147R;�1% RoHS : Compliant | 0 | |||
| PWCR0805-BL-150JT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;15R;�5% RoHS : Compliant | 0 | |||
| PWCR0805-BL-1580DT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;158R;�0.5% RoHS : Compliant | 0 | |||
| PWCR0805-BL-1R1JT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;1.1R;�5% RoHS : Compliant | 0 | |||
| PWCR0805-BL-21R5FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;21.5R;�1% RoHS : Compliant | 0 | |||
| PWCR0805-BL-31R6DT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;31.6R;�0.5% RoHS : Compliant | 0 | |||
| PWCR0805-BL-4R22FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;4.22R;�1% RoHS : Compliant | 0 | |||
| PWCR0805-BL-5R76FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;5.76R;�1% RoHS : Compliant | 0 | |||
| PWCR0805-BL-9R09FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;9.09R;�1% RoHS : Compliant | 0 | |||
| SWCR0805-BL-130JT | VENKEL LTD | Surge Withstanding CR;0805;2/5W;�200PPM;13R;�5% RoHS : Compliant | 0 | |||
| SWCR0805-BL-2R7KT | VENKEL LTD | Surge Withstanding CR;0805;2/5W;�200PPM;2.7R;�10% RoHS : Compliant | 0 | |||
| SWCR0805-BL-300KT | VENKEL LTD | Surge Withstanding CR;0805;2/5W;�200PPM;30R;�10% RoHS : Compliant | 0 | |||
 Vyrian | 5875BL001 | Alpha Wire | Wire And Cable, 1 Conductor(s), 22AWG, 1000V, Flexible Cord And Fixture Wire RoHS : Compliant | 18,049 | ||
| HSMS-2815-BLKG | Broadcom Limited | RoHS : Compliant | 9,459 | |||
| MT46V64M8BG-5BL | Micron Technology Inc | DRAM RoHS : Compliant | 7,175 | |||
| VMMK-1225-BLKG | Broadcom Limited | RF Small Signal Field-Effect Transistor, 1-Element, L Band, Gallium Arsenide, N-Channel, High Electron Mobility FET RoHS : Compliant | 4,939 | |||
MT46V16M16FG-5BLAT:F | Micron Technology Inc | DDR1 DRAM, 16MX16, 0.7ns, CMOS, PBGA60 RoHS : Not Compliant | 4,633 | |||
| MT46V64M8CV-5BLAAT:J | Micron Technology Inc | DDR1 DRAM, 64MX8, CMOS, PBGA60 | 4,595 | |||
| MT46V64M16TG-5BLIT | Micron Technology Inc | DRAM RoHS : Not Compliant | 4,489 | |||
| MT46V32M8BG-5BLIT | Micron Technology Inc | DDR1 DRAM, 32MX8, 0.7ns, CMOS, PBGA60 RoHS : Compliant | 4,214 | |||
MT46V128M4TG-5BLAT:D | Micron Technology Inc | DDR1 DRAM, 128MX4, 0.7ns, CMOS, PDSO66 | 4,179 | |||
| MT46V8M16FJ-5BL | Micron Technology Inc | DDR1 DRAM, 8MX16, 0.7ns, CMOS, PBGA60 RoHS : Not Compliant | 3,760 | |||
| MT46V32M16P-5BLIT | Micron Technology Inc | DDR1 DRAM, 32MX16, 0.7ns, CMOS, PDSO66 RoHS : Compliant | 3,334 | |||
| MT46V8M16P-5BLIT:A | Micron Technology Inc | DDR1 DRAM, 8MX16, 0.7ns, CMOS, PDSO66 RoHS : Compliant | 3,017 | |||
| MT46V16M16FG-5BLIT | Micron Technology Inc | DDR1 DRAM, 16MX16, 0.7ns, CMOS, PBGA60 RoHS : Not Compliant | 2,995 | |||
| MT46V16M16BG-5BLIT:F | Micron Technology Inc | DDR1 DRAM, 16MX16, 0.7ns, CMOS, PBGA60 RoHS : Compliant | 2,332 | |||
| 2SC1815-BL | Toshiba America Electronic Components | Small Signal Bipolar Transistor, 0.15A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon, TO-92 RoHS : Not Compliant | 870 | |||
 Waytek, Inc. | 18/1 UL1015 BLACK | Unified Wire and Cable Inc | 18GA Black MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 46,250 | |
| 12/1 UL1015 BLACK | Unified Wire and Cable Inc | 12GA Black MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 30,000 | ||
| 14/1 UL1015 BLUE | Unified Wire and Cable Inc | 14GA Blue MTW/AWM Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 22,750 | ||
| 16/1 UL1015 BLUE | Unified Wire and Cable Inc | 16GA Blue MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 21,500 | ||
| 10/1 UL1015 BLUE | Unified Wire and Cable Inc | 10GA Blue MTW/AWM Wire Bare Copper 600V,1000V UL 1015/1230/1032 CSA TEW |
| 16,750 | ||
| 20/1 UL1015 BLUE | Unified Wire and Cable Inc | 20GA Blue MTW/AWM Wire Tinned Copper 600V, 1000V DISC WAY |
| 11,000 | ||
| 12/1 UL1015 BLUE | Unified Wire and Cable Inc | 12GA Blue MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 6,000 | ||
| 18/1 UL1015 BLUE | Unified Wire and Cable Inc | 18GA Blue MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 5,000 | ||
| HST155BL-48-BULK | NSPA | NSPA HST155BL-48 HST150 Series flexible thin-wall heat shrink tubing is blue polyolefin tubing built for insulating and protecting wires, terminals, and splices. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable harness insulation. |
| 40 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand