 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
6312JI3JB-T 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
 ComSIT USA | 701631265 | BELLWETHER | AVAILABLE EU | 725 | ||
ComSIT USA | FDC6312P | Fairchild Semiconductor Corporation | DUAL P-CHANNEL 1.8V POWERTRENCH SPECIFIED MOSFET Small Signal Field-Effect Transistor, 2.3A I(D), 20V, 2-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 69,000 | ||
| MAX6312UK46D3T | Maxim Integrated Products | 5-PIN, MULTIPLE-INPUT, PROGRAMMABLE RESET IC Power Supply Support Circuit, Fixed, 1 Channel, +4.6VV, CMOS, PDSO5 RoHS : Not Compliant | 2,470 | |||
| Y31B63127FPLFG | C&K Switches | Pushbutton Switch, SMD, rated for signal-level applications, for user interface and control functions RoHS : Compliant | 2,000 | |||
| XTL661500HIK28636312TR | SIWARD Crystal Technology Co Ltd | Electronic Component RoHS : Compliant | 1,000 | |||
| 0263125HAT1L | Littelfuse Inc | AXIAL LEAD AND CARTRIDGE FUSE Electric Fuse, Very Fast Blow, 0.125A, 250VAC, 50A (IR), Through Hole, PICO RoHS : Compliant | 200 | |||
| 736312 | WAGO Innovative Connections | PCB TERMINAL STRIP Strip Terminal Block, 10A, 2.5mm2, 2 Row(s), 2 Deck(s) RoHS : Not Compliant | 100 | |||
| 9663127602 | HARTING Technology Group | STAMPED SOLDER PIN, ANGLED WITHOUT GROUNDING BOARD LOCK FEMALE CONNECTOR D Subminiature Connector, 25 Contact(s), Female, 0.109 inch Pitch, Solder Terminal, #4-40, Plug RoHS : Compliant | 41 | |||
 NexGen Digital | 1-329631-2 | TE Connectivity | RoHS : Compliant | 90 | ||
| 203263-1234 | Molex | 20 | ||||
 Rutronik | CR63-123-JE | ASJ Holdings Limited | RC2512 12K 5% 1W TK100 RoHS : Compliant |
| 12,000 | |
 Avnet Asia | PGL6312.121AHLT | Pulse Electronics Corporation | POWER INDUCTOR, 120NH (Alt: PGL6312.121AHLT) RoHS : Compliant | 38,000 | ||
| PGL6312.221AHLT | Pulse Electronics Corporation | POWER INDUCTOR 220 NH (Alt: PGL6312.221AHLT) RoHS : Compliant |
| 31,500 | ||
| PGL6312.121HLT | Pulse Electronics Corporation | Ind Power Shielded Wirewound 120nH 15% 100kHz 82A T/R (Alt: PGL6312.121HLT) RoHS : Compliant |
| 21,000 | ||
| G42V16312HR | Amphenol Corporation | Card Edge Connector, Dual Side, 1.57 mm, 148 Contacts, Surface Mount, Straight, Solder (Alt: G42V16312HR) RoHS : Compliant |
| 1,800 | ||
| G97R26312HR | Amphenol Corporation | Card Edge Connector, Dual Side, 1.57 mm, 148 Contacts, Surface Mount, Right Angle, Solder (Alt: G97R26312HR) RoHS : Compliant |
| 40 | ||
| PGL6312.221HLT | Pulse Electronics Corporation | POWER INDUCTOR, 120NH (Alt: PGL6312.221HLT) RoHS : Compliant | 0 | |||
| GH10R16312HR | Amphenol Corporation | (Alt: GH10R16312HR) RoHS : Compliant | 0 | |||
| G64V36312HR | Amphenol Corporation | (Alt: G64V36312HR) RoHS : Compliant | 0 | |||
| FK6312ZW-C01A-TT30G-50 | Amphenol Corporation | (Alt: FK6312ZW-C01A-TT30G-50) RoHS : Compliant | 0 | |||
| RJMG163128101NR | Amphenol Corporation | (Alt: RJMG163128101NR) RoHS : Compliant | 0 | |||
| AT62-201-1631-22 | Amphenol Corporation | Size 16 female solid machined contact, 22-24AWG, gold-plated (Alt: AT62-201-1631-22) RoHS : Compliant | 0 | |||
| GH10V16312HR | Amphenol Corporation | MINI COOL EDGE IO 85OHM V/T 148PIN, PCIE GEN6 (Alt: GH10V16312HR) RoHS : Compliant | 0 | |||
| PGL6312.900AHLT | Pulse Electronics Corporation | POWER INDUCTOR (Alt: PGL6312.900AHLT) RoHS : Compliant | 0 | |||
| 1563125-1 | TE Connectivity | (Alt: 1563125-1) RoHS : Compliant | 0 | |||
| AT60-202-1631-22 | Amphenol Corporation | Size 16 male solid machined contact, 22-24AWG, gold-plated (Alt: AT60-202-1631-22) RoHS : Compliant | 0 | |||
 Avnet Silica | AP7363-12D-13 | Diodes Incorporated | DIIAP736312D13 (Alt: AP7363-12D-13) RoHS : Compliant | 2,500 | ||
| FDC6312P | onsemi | Dual MOSFET P Channel 20 V 23 A (Alt: FDC6312P) RoHS : Compliant | 0 | |||
| JANS1N6312US | Microchip Technology Inc | (Alt: JANS1N6312US) RoHS : Not Compliant | 0 | |||
| MCP16312-E/MS | Microchip Technology Inc | (Alt: MCP16312-E/MS) RoHS : Compliant | 0 | |||
| MCP16312T-E/MS | Microchip Technology Inc | (Alt: MCP16312T-E/MS) RoHS : Compliant | 0 | |||
| MCP16312T-E/MNY | Microchip Technology Inc | (Alt: MCP16312T-E/MNY) RoHS : Compliant | 0 | |||
| DSC1123DE5-320.6312 | Microchip Technology Inc | MEMS OSC LVDS 3206312MHz 10PPM 2533V 20 to 70C 25 x 20mm (Alt: DSC1123DE5-320.6312) RoHS : Compliant | 0 | |||
 DB Roberts | OFNS-16-312-01 | Essentra Components | FIBER WIRE SDL,ARROW MNT,NATUR |
| 6,200 | |
| CAH2-3716-312 | SHEREX FASTENING SO | RNUT 3/8-16 312 STL SEMIHEX |
| 3,842 | ||
| D3-316-312-170 | Southco | D3-316-312-170 | 0 | |||
| MA-366-3124 | SHEREX FASTENING SO | 0 | ||||
| AEHSS-616-312-1088 | PennEngineering (PEM) | 3/8-16 | 0 | |||
| AELS8-616-312S | PennEngineering (PEM) | 0 | ||||
| AESS-616-312-838 | PennEngineering (PEM) | Provides strong external threads in blind applications.Easy to install using spin/spin tooling.The standard is assembled with an AEL insert but can also be assembled with an AEK or an AEH insert.Other materials available. | 0 | |||
| AELS8-616-312BS | PennEngineering (PEM) | 0 | ||||
| 1631-256-AL | RAF Electronic Hardware | 0 | ||||
| AEKC-616-312 | PennEngineering (PEM) | 0 | ||||
| 70815-06-312 | Dodge | ULTRASERT I - INCH | 0 | |||
| 47-63-121-60 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 063120437E | Essentra Components | 0 | ||||
| 063120700 | Essentra Components | LATCH, CAM- KEY CH751 | 0 | |||
| 58-36-31-26 | Southco | 0 | ||||
 Flip Electronics | CPH6312-TL-E | onsemi | Stock, Ship Today |
| 252,000 | |
 Maritex | 1563124-1 | TE Connectivity | Automotive Connectors; 1563124-1; TE CONNECTIVITY; Red; Yes RoHS : Compliant |
| 505,877 | |
| 1563126-1 | TE Connectivity | Automotive Connectors; 1563126-1; TE CONNECTIVITY; Red; Yes; 16.2 mm RoHS : Compliant |
| 10,134 | ||
| 1563123-1 | TE Connectivity | Automotive Connectors; 1563123-1; TE CONNECTIVITY; Black; 10; Yes RoHS : Compliant |
| 591 | ||
| FDC6312P | onsemi | MOSFETs; FDC6312P; ON SEMICONDUCTOR; 2.3 A; 115 m?; 960 mW; 2 RoHS : Compliant |
| 107 | ||
 Pasternack Enterprises US | PE3C6663-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Male Low Loss Cable 12 Inch Length Using LMR-400-DB Coax., Radio frequency assembly BNC male to BNC male low loss cable 12 inch length using LMR-400-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male low loss cable 12 inch length using LMR-400-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C6663-12, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C6663-12 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 12 inch length using LMR-400-DB coax. |
| 113 | |
| PE37163-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG6A/U, RF Cable Type: RG6, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm F Male to 75 Ohm F Male Cable 12 Inch Length Using 75 Ohm RG6 Coax., Radio frequency assembly 75 Ohm F male to 75 Ohm F male cable 12 inch length using 75 Ohm RG6 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm F male to 75 Ohm F male cable 12 inch length using 75 Ohm RG6 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom F type to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type F cable connection on one end and F type cable connection on the other. Our type F to type F cable assemblies have a male gender on end 1 and male on end 2. This type F to type F cable is a male to male coax assembly, PE37163-12, can also be known as a F type plug to type F plug cable assembly and will be shipped same-day as it is purchased. F type plug to type F plug cable assembly PE37163-12 is built with RG6 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to F type cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this type F male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type F plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality F type to type F cable assembly for quick shipment worldwide. Variations of F type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm F male cable 12 inch length using 75 Ohm RG6 coax. |
| 108 | ||
| PE3W17863-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Female Bulkhead to NEX10 Female Bulkhead Low PIM Cable 12 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 12 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 12 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 bulkhead cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W17863-12 can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17863-12 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 jack to NEX10 jack cable assembly PE3W17863-12 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack bulkhead to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 74 | ||
| PE363-12 | Pasternack Enterprises |
| 42 | |||
| PE3C4963-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Plug Bulkhead to BNC Male Cable 12 Inch Length Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to BNC male cable 12 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to BNC male cable 12 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BNC cable connection on the other. Our BMA to BNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to BNC cable is a plug to male coax assembly, PE3C4963-12, can also be known as a BMA male to BNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to BNC plug cable assembly PE3C4963-12 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BMA plug bulkhead to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4963-12 can also be used in the other direction and will be BNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to BNC male cable 12 inch length using RG400 coax. |
| 18 | ||
| PE3M0063-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 12 inches. MIL-DTL-17 BNC Male to TNC Male Cable 12 Inch Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 BNC male to TNC male cable 12 inch length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to TNC male cable 12 inch length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0014 BNC to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0014 BNC cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our M39012/16-0014 BNC to M39012/26-0011 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0014 BNC to M39012/26-0011 TNC cable is a male to male coax assembly, PE3M0063-12, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0014 BNC plug to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/16-0014 BNC plug to M39012/26-0011 TNC plug cable assembly PE3M0063-12 is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/16-0014 BNC cable assembly is manufactured with M39012/16-0014 BNC to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 4 GHz maximum frequency M39012/16-0014 BNC male to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0063-12 can also be used in the other direction and will be M39012/26-0011 TNC male to M39012/16-0014 BNC male cable assembly if the opposite connectivity is required. M39012/16-0014 BNC plug to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0014 BNC to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/16-0014 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to TNC male cable 12 inch length using M17/128-RG400 coax. |
| 8 | ||
| PE3MSA00563-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Lead Free 3-Lug TRB Jack to TRB Threaded Plug for PE-30-02001, 12 Inch Cable., Radio frequency assembly lead free 3-Lug TRB jack to TRB threaded plug for PE-30-02001, 12 inch cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 3-Lug TRB jack to TRB threaded plug for PE-30-02001, 12 inch cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and plug on end 2. PE3MSA00563-12 can also be known as a 1553 TRB female to TRB male cable assembly and will be shipped same-day as it is purchased. TRB female to TRB male cable assembly PE3MSA00563-12 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB jack to TRB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00563-12 can also be used in the other direction and will be TRB plug to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to TRB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 3-Lug TRB jack to TRB threaded plug for PE-30-02001, 12 inch cable. |
| 2 | ||
| PE3C8263-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 12 inches. 4.3-10 Male Right Angle to N Male Low PIM Cable 12 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male right angle to N male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.3-10 cable connection on one end and type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assemblies have a male gender on end 1 and male on end 2. This 4.3-10 to type N cable is a male to male coax assembly, PE3C8263-12, can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to N type plug cable assembly PE3C8263-12 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8263-12 can also be used in the other direction and will be N type male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male right angle to N male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3W03663-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm Push-On MCX Plug Right Angle to 75 Ohm BNC Female Bulkhead Cable 12 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm push-on MCX plug right angle to 75 Ohm BNC female bulkhead cable 12 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm push-on MCX plug right angle to 75 Ohm BNC female bulkhead cable 12 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle MCX cable connection on one end and BNC bulkhead cable connection on the other. Our right angle MCX to BNC cable assembly has plug gender on end 1 and female on end 2. PE3W03663-12 can also be known as a right angle MCX male to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. MCX male to BNC jack cable assembly PE3W03663-12 is built with RG179 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to BNC cable connectors, has a 75 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with gold plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W03663-12 RF cable are available on our downloadable PDF datasheet.PE3W03663-12 can also be used in the other direction and will be BNC female bulkhead to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to BNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7863-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Male Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly SMA male to SMA male low PIM cable 12 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male low PIM cable 12 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C7863-12, can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C7863-12 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low PIM cable 12 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3W18063-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: LC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. LC Male to HN Male Right Angle Cable 12 Inch Length Using RG393 Coax., Radio frequency assembly LC male to HN male right angle cable 12 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The LC male to HN male right angle cable 12 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom LC to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a LC cable connection on one end and a right angle HN cable connection on the other. Our LC to right angle HN cable assembly has a male gender on end 1 and a male on end 2. PE3W18063-12 can also be known as a LC plug to right angle HN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18063-12 RF cable has a FEP jacket of 0.390-inch diameter. The flexible RF cable has a between series connection. LC plug to HN plug cable assembly PE3W18063-12 is built with RG393 which is a flexible coax type. The Pasternack flexible LC cable assembly is manufactured with LC to right angle HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W18063-12 can also be used in the other direction and will be a right angle HN male to LC male cable assembly if the opposite connectivity is required. LC plug to HN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality LC to HN cable assembly for quick shipment worldwide. Variations of LC and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal LC to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE35563-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Female Bulkhead to MMCX Plug Right Angle Cable 12 Inch Length Using RG316-DS Coax., Radio frequency assembly TNC female bulkhead to MMCX plug right angle cable 12 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female bulkhead to MMCX plug right angle cable 12 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to MMCX cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and right angle MMCX cable connection on the other. Our TNC to right angle MMCX cable assembly has female gender on end 1 and plug on end 2. PE35563-12 can also be known as a TNC jack to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. TNC jack to MMCX male cable assembly PE35563-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle MMCX cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE35563-12 RF cable are available on our downloadable PDF datasheet.PE35563-12 can also be used in the other direction and will be right angle MMCX plug to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to MMCX cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C6312 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: LC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to LC Male Right Angle Cable Using RG214 Coax., Radio frequency assembly 7/16 DIN male to LC male right angle cable using RG214 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to LC male right angle cable using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to LC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle LC cable connection on the other. Our 7/16 DIN to right angle LC cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to LC cable is a male to male coax assembly, PE3C6312, can also be known as a 7/16 DIN plug to right angle LC plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to LC plug cable assembly PE3C6312 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle LC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN male to LC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6312 can also be used in the other direction and will be right angle LC male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to LC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to LC cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to LC male right angle cable using RG214 coax. | 0 | |||
| PE3C10263-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: F, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Nickel, Connector 1 Body Plating: Gold over Copper, RF Cable Part Number: LMR-240-75-DB, RF Cable Type: LMR-240-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm F Male to 75 Ohm N Male Low Loss Cable 12 Inch Length Using 75 Ohm LMR-240-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm F male to 75 Ohm N male low loss cable 12 inch length using 75 Ohm LMR-240-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm F male to 75 Ohm N male low loss cable 12 inch length using 75 Ohm LMR-240-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to type N cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type F cable connection on one end and N type cable connection on the other. Our low loss F type to type N cable assembly has male gender on end 1 and male on end 2. PE3C10263-12 can also be known as a low loss F type plug to N type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10263-12 RF cable has a PE jacket of 0.240-inch diameter. The RF cable has a between series connection. Type F plug to type N plug cable assembly PE3C10263-12 is built with LMR-240-75-DB which is a coax type. The Pasternack F cable assembly is manufactured with type F to type N cable connectors, has a 75 Ohm impedance. One connector features the crimp/solder attachment method and a nickel body with gold over copper plating, while the other has crimp/non-solder contact attachment method and nickel body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10263-12 can also be used in the other direction and will be type N male to F type male cable assembly if the opposite connectivity is required. Low loss type F plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to type N cable assembly for quick shipment worldwide. Variations of type F and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal F to N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C10363-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 120 Inch Length Using TCOM-600 Coax With Times Microwave Components., Radio frequency assembly 7/16 DIN male to 7/16 DIN male low PIM cable 120 inch length using TCOM-600 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male low PIM cable 120 inch length using TCOM-600 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 7/16 DIN to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10363-120 can also be known as a low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10363-120 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C10363-120 is built with TCOM-600 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
 Teledyne HiRel | 5962-8606312YA | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
5962-8606312QXA | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8606312QYA | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8606312UA | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8606312XA | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | C1206X7R631-223KNE | VENKEL LTD | HV Chip Capacitor;1206;X7R;630V;0.022uF;�10% RoHS : Compliant | 12,000 | ||
| FTC2220X7R631-224KNE | VENKEL LTD | Flex Termination Ceramic Cap;2220;X7R;630V;0.22uF;�10% RoHS : Compliant | 2,000 | |||
| C1210C0G631-220JNE | VENKEL LTD | HV Chip Capacitor;1210;C0G;630V;22pF;�5% RoHS : Compliant | 0 | |||
| C1210C0G631-270JNE | VENKEL LTD | HV Chip Capacitor;1210;C0G;630V;27pF;�5% RoHS : Compliant | 0 | |||
| C1825C0G631-272JNE | VENKEL LTD | HV Chip Capacitor;1825;C0G;630V;2700pF;�5% RoHS : Compliant | 0 | |||
| C0805C0G631-2R0CNP | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;2.0pF;�0.25pF RoHS : Compliant | 0 | |||
| C1812C0G631-220JNE | VENKEL LTD | HV Chip Capacitor;1812;C0G;630V;22pF;�5% RoHS : Compliant | 0 | |||
| AGC1206C0G631-220JNP | VENKEL LTD | Auto Grade Capacitor;1206;C0G;630V;22pF;�5% RoHS : Compliant | 0 | |||
| AGC1206X7R631-272KNE | VENKEL LTD | Auto Grade Capacitor;1206;X7R;630V;2700pF;�10% RoHS : Compliant | 0 | |||
| C1808X7R631-272KNE | VENKEL LTD | HV Chip Capacitor;1808;X7R;630V;2700pF;�10% RoHS : Compliant | 0 | |||
| C0805C0G631-270GNP | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;27pF;�2% RoHS : Compliant | 0 | |||
| C1210C0G631-222JNE | VENKEL LTD | HV Chip Capacitor;1210;C0G;630V;2200pF;�5% RoHS : Compliant | 0 | |||
| C1808C0G631-2R0CNE | VENKEL LTD | HV Chip Capacitor;1808;C0G;630V;2.0pF;�0.25pF RoHS : Compliant | 0 | |||
| C1812C0G631-222JNE | VENKEL LTD | HV Chip Capacitor;1812;C0G;630V;2200pF;�5% RoHS : Compliant | 0 | |||
| C0805C0G631-220FNP | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;22pF;�1% RoHS : Compliant | 0 | |||
 Vyrian | 86312CYSL005 | Alpha Wire | Wire And Cable, 12 Conductor(s), 22AWG, 300V, Flexible Cord And Fixture Wire RoHS : Compliant | 16,305 | ||
| MAX6312EUK39D3+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.9V, CMOS, PDSO5 RoHS : Compliant | 11,093 | |||
| MAX6312EUK31D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.08V, CMOS, PDSO5 RoHS : Compliant | 9,160 | |||
| MAX6312EUK30D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3V, CMOS, PDSO5 RoHS : Compliant | 9,025 | |||
| MAX6312EUK28D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.8V, CMOS, PDSO5 RoHS : Compliant | 8,679 | |||
| MAX6312UK43D3 | Analog Devices (Maxim Integrated) | 8,584 | ||||
| MAX6312EUK45D3+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.5V, CMOS, PDSO5 RoHS : Compliant | 7,958 | |||
| MAX6312UK26D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.63V, CMOS, PDSO5 RoHS : Compliant | 7,812 | |||
| MAX6312UK27D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.7V, CMOS, PDSO5 RoHS : Compliant | 6,890 | |||
| MAX6312UK32D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.2V, CMOS, PDSO5 RoHS : Compliant | 6,165 | |||
| HCPL-5631#200 | Broadcom Limited | RoHS : Not Compliant | 5,449 | |||
| JANS1N6312DUS | Microchip Technology Inc | Zener Diode, 3.3V V(Z), 1%, 0.5W, Silicon, Unidirectional RoHS : Not Compliant | 4,221 | |||
| JANS1N6312US | Microchip Technology Inc | Zener Diode, 3.3V V(Z), 5%, 0.5W, Silicon, Unidirectional RoHS : Not Compliant | 2,566 | |||
MAX6312EUK46D3-T | Maxim Integrated Products | Power Supply Support Circuit, Fixed, 1 Channel, +4.63V, CMOS, PDSO5 RoHS : Not Compliant | 1,165 | |||
| ZPED-1616-312PN | Amphenol Corporation | Circular Connector, 19 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Plug RoHS : Compliant | 425 | |||
 Waytek, Inc. | 956-3124 | Littelfuse Inc | The Cole Hersee 956-3124 is a heavy-duty 3-position ignition switch designed for reliable engine control in automotive and equipment applications. Featuring OFFIGN/ACCSTART positions with anti-restart protection, it prevents accidental re-engagement of the starter. Rated for 12V (10A ACC/IGN, 5A start), it includes five screw terminals, a lever actuator, and sealed construction with O-ring and gasket for durability in harsh environments. |
| 32 | |
 Win Source Electronics | MCP16312T-E/MS | Microchip Technology Inc | IC REG BUCK ADJUSTABLE 1A 8MSOP / Buck Switching Regulator IC Positive Adjustable 2V 1 Output 1A 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) RoHS : Compliant |
| 14,783 | |
| SKY66312-11 | Skyworks Solutions Inc | IC AMP 4G/5G 2.3-2.4GHZ 16MCM RoHS : Compliant |
| 4,438 |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼ 
English
Chinese
German
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand