| データシートサーチシステム |
|
6908L-SH2-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() TME | 87369-0800 | Molex | Connector: wire-board; female; data; PIN: 8; straight; crimped RoHS : Compliant |
| 422,430 | |
| 1006908 | Bossard Group | Screw; M4; M4x22; 0.7; Head: cheese head; hex key; HEX 3mm; steel |
| 700 | ||
| 14269088 | WIKA Instrument LP | Automation module: pressure switch; pressure; OUT 1: relay,SPDT |
| 17 | ||
| 1446908 | Bossard Group | Washer; specialist; h=4.8mm; M8; D=25mm; steel; zinc; BN 1277 |
| 0 | ||
| 03469080 | GSR | Screw starter; for metal; Ø: 8mm; L: 79mm; Working part len: 21mm |
| 0 | ||
| 1769080000 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; power supply; OMNIMATE; 10A,15A RoHS : Compliant |
| 0 | ||
| 001690881 | ETI Polam | Fuse disconnector; NH00; 160A; 690VAC; Poles: 3; 440VDC |
| 0 | ||
| 14269089 | WIKA Instrument LP | Automation module: pressure switch; pressure; OUT 1: relay,SPDT |
| 0 | ||
| 001690880 | ETI Polam | Fuse disconnector; NH00; 160A; 690VAC; Poles: 3; 440VDC |
| 0 | ||
| 1964690800 | Weidmüller Interface GmbH & Co. KG | Cable: for sensors; M12; PIN: 5; female; shielded,straight; plug; 4A RoHS : Compliant |
| 0 | ||
| 001690891 | ETI Polam | Fuse disconnector; NH1; 250A; 690VAC; Poles: 1; 440VDC |
| 0 | ||
| 1879690-8 | TE Connectivity | Resistor: thin film; 14.7kΩ; THT; 500mW; ±0.1%; Ø3.7x10mm; axial RoHS : Compliant |
| 0 | ||
| 36908000000 | Littelfuse Inc | Fuse: fuse; 8.5x4x8mm; TE5; THT; 800mA; 300VAC; time-lag; 369; copper RoHS : Compliant |
| 0 | ||
| 4269-08-90 | KING TONY | Extension; impact; 1/2"; 195mm |
| 0 | ||
| 001690892 | ETI Polam | Fuse disconnector; NH3; 630A; 690VAC; Poles: 1; 440VDC |
| 0 | ||
![]() Avnet Americas | 6469083-1 | TE Connectivity | - Rail/Tube (Alt: 6469083-1) RoHS : Compliant |
| 21,298 | |
| 6469081-1 | TE Connectivity | - Rail/Tube (Alt: 6469081-1) RoHS : Compliant |
| 9,692 | ||
| 1546908-1 | TE Connectivity | Conn RJ-45 RCP 8 POS Crimp ST Panel Mount 8 Terminal 1 Port Cat 5 - Bulk (Alt: 21R4270) RoHS : Compliant |
| 0 | ||
| 170M6908 | Eaton Corporation | - Bulk (Alt: 170M6908) RoHS : Compliant |
| 0 | ||
| 213069-0800 | Molex | FA2 Mechanical Feed Crimp Applicator, 207127 Series, Squba 3.6 Receptacle Terminals, 20 to 18 AWG - Bulk (Alt: 2130690800) RoHS : Compliant |
| 0 | ||
| 8-2176690-8 | TE Connectivity | MELF SMA-Q 9K09 0.1% 25PPM 0204 0.25W - Tape and Reel (Alt: 8-2176690-8) RoHS : Not Compliant |
| 0 | ||
| 2-2176690-8 | TE Connectivity | MELF SMA-Q 2K15 0.1% 25PPM 0204 0.25W - Tape and Reel (Alt: 2-2176690-8) RoHS : Not Compliant |
| 0 | ||
| MP6908LGJ-Z | Monolithic Power Systems | Fast Turn-Off Intelligent Rectifier IC, 4.5 V to 13 V Supply, TSOT-23-6, -40 ?C to 125 ?C - Tape and Reel (Alt: MP6908LGJ-Z) RoHS : Compliant |
| 0 | ||
| XUL536908.000000I | SiTime Corporation | - Tape and Reel (Alt: XUL536908.000000I) RoHS : Compliant | 0 | |||
| HM1690800000G | Amphenol Corporation | - Bulk (Alt: HM1690800000G) RoHS : Compliant |
| 0 | ||
| 1-2176690-8 | TE Connectivity | MELF SMA-Q 1K69 0.1% 25PPM 0204 0.25W - Tape and Reel (Alt: 1-2176690-8) RoHS : Not Compliant |
| 0 | ||
| 1069080000 | Weidmüller Interface GmbH & Co. KG | WS 10/6 MC M NE BL - Bulk (Alt: 1069080000) RoHS : Not Compliant |
| 0 | ||
| 7-2266908-7 | TE Connectivity | - Bag (Alt: 7-2266908-7) RoHS : Not Compliant |
| 0 | ||
| HM0690810000G | Amphenol Corporation | - Bulk (Alt: HM0690810000G) RoHS : Compliant |
| 0 | ||
| MP6908AGJ-Z | Monolithic Power Systems | Intelligent Rectifier 3.55V to 3.95V 6-Pin TSOT-23 T/R - Tape and Reel (Alt: MP6908AGJ-Z) RoHS : Compliant |
| 0 | ||
![]() Newark | LTC6908IS6-1#TRPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908IS6-1#TRPBF RoHS : Compliant |
| 1,805 | |
| LTC6908IS6-1#TRPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908IS6-1#TRPBF RoHS : Compliant |
| 1,805 | ||
| LTC6908HS6-1#TRMPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908HS6-1#TRMPBF RoHS : Compliant |
| 1,449 | ||
| LTC6908HS6-1#TRMPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908HS6-1#TRMPBF RoHS : Compliant |
| 1,449 | ||
| MP016908 | SPC Multicomp | Cbl Assy/Female Terminal To Free End, 1M; |Multicomp Pro MP016908 RoHS : Compliant |
| 1,000 | ||
| 44769-0801 | Molex | Connector, Rcpt, 8Pos, 2Row, 3Mm; |Molex 44769-0801 RoHS : Compliant |
| 527 | ||
| LTC6908IS6-2#TRMPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908IS6-2#TRMPBF RoHS : Compliant |
| 461 | ||
| LTC6908IS6-2#TRMPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908IS6-2#TRMPBF RoHS : Compliant |
| 461 | ||
| 78439369082 | Wurth Elektronik | Inductor, Aecq200, 8.2Uh, Shielded, 9.8A; |Würth Elektronik 78439369082 RoHS : Compliant |
| 228 | ||
| 78439369082 | Wurth Elektronik | Inductor, Aecq200, 8.2Uh, Shielded, 9.8A; |Würth Elektronik 78439369082 RoHS : Compliant |
| 228 | ||
| LTC6908CS6-2#TRMPBF | Analog Devices Inc | Spread Spectrum, 10Mhz, 40Ppm, Cmos; |Analog Devices, Inc. LTC6908CS6-2#TRMPBF RoHS : Compliant |
| 228 | ||
| LTC6908CS6-2#TRMPBF | Analog Devices Inc | Spread Spectrum, 10Mhz, 40Ppm, Cmos; |Analog Devices, Inc. LTC6908CS6-2#TRMPBF RoHS : Compliant |
| 228 | ||
| 2386908-3 | TE Connectivity | Cir Cable, Rcpt-Free End, Rev, 4P, 2M; Connector To Connector:Circular Receptacle To Free End; No. Of Positions:4Positions; Cable Length - Imperial:6.6Ft; Cable Length - Metric:2M; Jacket Color:-; Product Range:- Rohs Compliant: Yes RoHS : Compliant |
| 192 | ||
| 2386908-2 | TE Connectivity | Cir Cable, Rcpt-Free End, Rev, 4P, 1M; Connector To Connector:Circular Receptacle To Free End; No. Of Positions:4Positions; Cable Length - Imperial:3.3Ft; Cable Length - Metric:1M; Jacket Color:-; Product Range:- Rohs Compliant: Yes RoHS : Compliant |
| 159 | ||
| 1546908-1 | TE Connectivity | Connector, Rj45, Receptacle, 8 Position, Panel; Modular Connector Type:Rj45 Jack; Port Configuration:1 X 1 (Port); No. Of Positions/Loaded Contacts (Per Port):8P8C; Lan Category:Cat5; Ip Rating:Ip67; Connector Mounting:Cable Mount Rohs Compliant: Yes RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | LTC6908HS6-2#TRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 20,000 | |
| LTC6908IDCB-2#TRMPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 18,101 | ||
| LTC6908CDCB-2#TRMPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 14,018 | ||
| LTC6908IDCB-1#TRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 7,998 | ||
| LTC6908CDCB-1#TRMPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 7,631 | ||
| LTC6908CS6-1#TRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 5,803 | ||
| LTC6908IS6-1#TRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 649 | ||
| LTC6908HS6-1#TRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 646 | ||
| LTC6908HS6-2#WTRMPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 554 | ||
| LTC6908CS6-2#TRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 486 | ||
| LTC6908HS6-1#TRMPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 420 | ||
| LTC6908IS6-2#TRMPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 213 | ||
| LTC6908CS6-2#TRMPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 99 | ||
| LTC6908CDCB-2#TRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 0 | ||
| MAX16908RAUE50/V+ | Analog Devices Inc | 600mA, 2.1MHz, High-Voltage, M | 0 | |||
![]() RS | 69083149143 | Norton Winter | MOUNTED POINT, VITRIFIED BOND, QUANTUM, 3NQ CA, 3/4IN. X 1IN. |
| 25 | |
| 39-30-1081 (5569-08A2G) | Molex | HEADER 4.20MM, DUAL ROW, RA, PCB LOCK, 8W |
| 23 | ||
| 2369085 | RS Pro | MALE MICRO USB TYPE A TO FEMALE MICRO USB TYPE B 2.0 CABLE, 1.6FT (0.5M) |
| 17 | ||
| 2369084 | RS Pro | MALE MINI USB 2.0 TYPE B TO MALE MINI USB 2.0 TYPE B EXTENDED CABLE, 3.2 FT (1M) |
| 13 | ||
| 2269089 | RS Pro | HIGH RATIO HEAVY WALL HEAT SHRINK |
| 9 | ||
| 120066-0690 (884030K05M030) | Woodhead Molex | MICRO-CHANGE (M12) DOUBLE-ENDED CORDSET, 4 POLES, FEMALE TO MALE, 884030K05M030 |
| 6 | ||
| 2069087 | RS Pro | LIGHT GRAY ABS POLYCARBONATE ENCLOSURE 121.4MM X 81.6MM X 45.2MM IP65 |
| 5 | ||
| 2269080 | RS Pro | BLACK ADHESIVE LINED END CAP 5.72MM SLEEVE DIA X 30.35MM LENGTH 4:1 RATIO |
| 5 | ||
| 2269085 | RS Pro | HEAVY WALL ADHESIVE LINED HEAT SH |
| 3 | ||
| 1SFA616908R9004 | ABB Low Voltage Products and Systems | TEXT CAP BLACK FLUSH 0 |
| 2 | ||
| 1SFA616908R9018 | ABB Low Voltage Products and Systems | TEXT CAP BLACK FLUSH SYMBOL |
| 2 | ||
| UL PCM 125/75 T (6416908) | FIBOX | PC ENCLOSURE, 5" WIDE X 3" DEEP X 5" HIGH, TRANSPARENT COVER, UL 508 |
| 2 | ||
| CPE14-M1BH-5J-QS-8 (196908) | Festo | VALVE, 5/2 BISTABLE, QS-8, G1/8, 24VDC, INT PILOT, 2 TO 8 BAR, 680L/MIN |
| 2 | ||
| 2369087 | RS Pro | MALE USB 3.0 TYPE A TO MALE USB 3.0 TYPE B SUPERSPEED DATA CABLE, 6FT (2M) |
| 1 | ||
| 6908 | Koyo Encoder Inc | BALL BEARING, RADIAL, 40MM ID, 62MM OD |
| 0 | ||
![]() Bisco Industries | F6-908 | Southco | Removable Hinge Frame Leaf, Formed Style, M5Stud Mount, Steel, Zinc Plate, Bright chromate |
| 4,782 | |
| VC-690-8 BLACK | Caplugs | 2,400 | ||||
| MS21069-08 | MS Nuts | 1,814 | ||||
| MS21069-08 | Multiple Manufacturers | 1,760 | ||||
| 6908-SS-20 | RAF Electronic Hardware | 728 | ||||
| MS35690-822 | MS Nuts | 300 | ||||
| MS35690-827 | MS Nuts | 50 | ||||
| NAS1669-08L5 | NAS Rivets | 48 | ||||
| 051-328-6908229 | ITT Interconnect Solutions | 6 | ||||
| MS35690-802 | MS Nuts | 2 | ||||
| 6908-SS | RAF Electronic Hardware | 1 | ||||
| MS35690-810 | MS Nuts | 1 | ||||
![]() Rochester Electronics | MAX16908RAUE50/V+ | Analog Devices Inc | 600mA, 2.1MHz, High-Voltage, Mini-Buck C | 11,955 | ||
| LTC6908IS6-1#TRMPBF | Analog Devices Inc | Timer Oscillator, Silicon 10MHz SOT-23-6 T/R RoHS : Compliant |
| 69 | ||
| MAX16908RAUE50/V+T | Analog Devices Inc | 600mA, 2.1MHz, High-Voltage, Mini-Buck C | 15,000 | |||
| LTC6908CS6-1#TRMPBF | Linear Technology | Timer Oscillator, Silicon 10MHz SOT-23-6 T/R RoHS : Compliant |
| 400 | ||
| MAX16908XAUE50/V+ | Maxim Integrated Products | MAX16904 2.1Mhz, High-Voltage, 600mA, Mini-Buck Converter |
| 51,360 | ||
![]() Sager | 170M6908 | Eaton Bussmann | Specialty Fuses BUSS SEMITRON FUSE | 0 | ||
| 690812-1 | TE Connectivity | Crimpers / Crimping Tools INSULATION CRIMPER | 0 | |||
| 690801-2 | TE Connectivity | Crimpers / Crimping Tools CRIMPER-INSUL F | 0 | |||
| 8-2176690-8 | TE Connectivity | MELF SMA-Q 9K09 0.1% 25PPM 0204 0.25W RoHS : Compliant |
| 0 | ||
| 7-1583690-8 | TE Connectivity | Crimpers / Crimping Tools CRIMPER INSULATION O .072 RoHS : Unknown | 0 | |||
| 2-2176690-8 | TE Connectivity | MELF SMA-Q 2K15 0.1% 25PPM 0204 0.25W RoHS : Compliant |
| 0 | ||
| 1-1583690-8 | TE Connectivity | Bench Top Tools CRIMPER INSULATION O | 0 | |||
| 0534269080 | Molex | Molex 2.50MM HDR 08P RA TH RoHS : Compliant |
| 0 | ||
| HW-04-10-F-D-669-080 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-04-10-T-D-669-080 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| ASP-169087-01 | Samtec Inc | Board to Board & Mezzanine Connectors | 0 | |||
| 869084-4 | TE Connectivity | DC Power Cords LGH1 LEAD ELECT MLD END RoHS : Compliant | 0 | |||
| COOPRPWR2690851D03 | ABB Group | COOPER POWER 2690851D03 |
| 0 | ||
| 166-90869 | HellermannTyton | HELAGUARD NON-METALLIC ULTRA IP68 FITTING, 90-DEGREE ELBOW, 0.5 NPT THREAD, 0.50 DIA, PA66, BLACK, 50/BOX |
| 0 | ||
| 2906908 | Phoenix Contact | PCBs & Breadboards ME LP |
| 0 | ||
![]() Ameya Holding Limited | LTC6908IS6-1#TRPBF | Analog Devices Inc | IC OSC SILICON PROG TSOT23-6 RoHS : Compliant | 340 | ||
![]() ComSIT USA | JZ505416908 | STORA ENSO | AVAILABLE EU | 13,337 | ||
![]() ComSIT USA | RA6908105MRD | Coilcraft Inc | Inductor, Coilcraft, RA series, 105 �H, SMT RoHS : Compliant | 13,500 | ||
![]() Interstate Connecting Components | C69087-073 | TE Connectivity | POLT-12D/3XIH4-L16B | 0 | ||
| SA85002616908 | SOURIAU-SUNBANK | J38601 | 0 | |||
| 690888-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCB-004-00 RoHS : Not Compliant | 0 | |||
| 8-2176690-8 | TE Connectivity | MELF SMA-Q 9K09 0.1% 25PPM 020 RoHS : Compliant | 0 | |||
| 2-2176690-8 | TE Connectivity | MELF SMA-Q 2K15 0.1% 25PPM 020 RoHS : Compliant | 0 | |||
| 10-769082-000N | Amphenol Aerospace | 10-769082-000N | 0 | |||
| HM1690800000G | Amphenol Anytek | HM- 7.5 -16P GREY DIP SOLDER | 0 | |||
| 3-1879690-8 | TE Connectivity | H4 30K1 0.1% 100PPM RoHS : Compliant |
| 0 | ||
| 1-2176690-8 | TE Connectivity | MELF SMA-Q 1K69 0.1% 25PPM 020 RoHS : Compliant | 0 | |||
| 1583690-8 | TE Connectivity | CRIMPER, INSULATION O (.120 ) |
| 0 | ||
| 7-2266908-7 | TE Connectivity | OCEAN_2.0_SPARE_PART_KIT-079F1 |
| 0 | ||
| HM0690810000G | Amphenol Anytek | HM- 7.5 -6P GREY PRESS-FIT CO | 0 | |||
| 9-1879690-8 | TE Connectivity | H4 127K 0.1% 100PPM RoHS : Compliant |
| 0 | ||
| C69087-064 | TE Connectivity | POLT-12D/3XIH4-L16B | 0 | |||
| 4-1879690-8 | TE Connectivity | H4 38K3 0.1% 100PPM RoHS : Compliant |
| 0 | ||
![]() Powell Electronics | 1469081-2 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Not Compliant |
| 4,303 | |
| 6469083-2 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 990 | ||
| 586908-000 | TE Connectivity | Labels and Industrial Warning Signs RoHS : Compliant |
| 792 | ||
| M10-676908-199A | Amphenol Corporation | Connector |
| 655 | ||
| M10-676908-239A | Amphenol Corporation | Connector |
| 591 | ||
| M10-676908-199B | Amphenol Corporation | Connector |
| 221 | ||
| M10-676908-13HA | Amphenol Corporation | Connector |
| 146 | ||
| M10-676908-25HA | Amphenol Corporation | Connector |
| 127 | ||
| 1-1690823-7 | TE Connectivity | Connectors |
| 66 | ||
| M10-676908-21HA | Amphenol Corporation | Connector |
| 63 | ||
| 6469085-1 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 3 | ||
| 7-1583690-8 | TE Connectivity | Tools RoHS : Unknown |
| 2 | ||
| 1583690-8 | TE Connectivity | CRIMPER, INSULATION O (.120 ) |
| 2 | ||
| 690816-6 | TE Connectivity | Connectors |
| 1 | ||
| 690809-000 | TE Connectivity | Tinel-Lock RoHS : Not Compliant |
| 1 | ||
![]() Rutronik | 10169084-128KALF | Amphenol Communications Solutions | 1.8MM WIRE TO BOARD-HEADER RoHS : Compliant |
| 10 | |
![]() Chip 1 Exchange | BSS138N H6908 | Infineon Technologies AG | INSTOCK | 30,000 | ||
| 586908-000 | TE Connectivity | INSTOCK RoHS : Compliant | 3,510 | |||
| AON6908ALS | INSTOCK | 2,169 | ||||
| 15369084 | DELPH | INSTOCK | 624 | |||
| 1469081-1 | TE Connectivity | INSTOCK RoHS : Not Compliant | 20 | |||
| 44769-0802 | Molex | INSTOCK RoHS : Compliant | 12 | |||
| LTC6908IS6-2#TRPBF | LTECH | INSTOCK | 3 | |||
![]() Avnet Abacus | 6469081-1 | TE Connectivity | Connector HMZd 60 Contacts 25 mm Receptacle Press Fit 6 Rows (Alt: 6469081-1) RoHS : Compliant | 2,520 | ||
| 6469081-1 | TE Connectivity | Connector HMZd 60 Contacts 25 mm Receptacle Press Fit 6 Rows (Alt: 6469081-1) RoHS : Compliant | 100 | |||
| 1769087 | Phoenix Contact | Pluggable Terminal Block 35 mm 5 Ways 15 mm Screw (Alt: 1769087) RoHS : Compliant | 50 | |||
| 690801-2 | TE Connectivity | (Alt: 690801-2) RoHS : Not Compliant | 0 | |||
| 690816-2 | TE Connectivity | (Alt: 690816-2) RoHS : Compliant | 0 | |||
| 969082-1 | TE Connectivity | AMP9690821 (Alt: 969082-1) RoHS : Compliant | 0 | |||
| 1546908-1 | TE Connectivity | Conn RJ45 RCP 8 POS Crimp ST Panel Mount 8 Terminal 1 Port Cat 5 (Alt: 1546908-1) RoHS : Compliant | 0 | |||
| 1583690-8 | TE Connectivity | (Alt: 1583690-8) RoHS : Not Compliant | 0 | |||
| 1583690-8 | TE Connectivity | (Alt: 1583690-8) RoHS : Not Compliant | 0 | |||
| 690857-000 | TE Connectivity | (Alt: 690857-000) RoHS : Not Compliant | 0 | |||
| 690888-000 | TE Connectivity | (Alt: 690888-000) RoHS : Not Compliant | 0 | |||
| 690888-000 | TE Connectivity | (Alt: 690888-000) RoHS : Not Compliant | 0 | |||
| 690801-000 | TE Connectivity | (Alt: 690801-000) RoHS : Not Compliant | 0 | |||
| 1-1583690-8 | TE Connectivity | CRIMPER INSULATION O (Alt: 1-1583690-8) RoHS : Not Compliant | 0 | |||
| HM1690800000G | Amphenol Corporation | (Alt: HM1690800000G) RoHS : Compliant | 0 | |||
![]() Avnet Asia | BA6908F-GE2 | ROHM Semiconductor | 1-Phase Full Wave Motor Driver 2.6V to 14V 8-Pin SOP Emboss T/R (Alt: BA6908F-GE2) RoHS : Compliant | 0 | ||
| PI3EQX16908GLZLEX | Diodes Incorporated | (Alt: PI3EQX16908GLZLEX) RoHS : Compliant | 0 | |||
| M1001-06908 | Amphenol Corporation | NAFI CONNECTOR (Alt: M1001-06908) RoHS : Compliant | 0 | |||
| 6469085-1 | TE Connectivity | Conn Hard Metric HDR 60 POS 2.5mm Press Fit ST Thru-Hole (Alt: 6469085-1) RoHS : Compliant | 0 | |||
| 6469081-1 | TE Connectivity | (Alt: 6469081-1) RoHS : Compliant | 0 | |||
![]() Avnet Silica | 856908TR | Qorvo | SAW Duplexer 8365MHz 8815MHz CSMP (Alt: 856908TR) RoHS : Compliant | 0 | ||
| MP6908GJ-P | Monolithic Power Systems | (Alt: MP6908GJ-P) RoHS : Compliant | 0 | |||
| MP6908GJ-Z | Monolithic Power Systems | (Alt: MP6908GJ-Z) RoHS : Compliant | 0 | |||
| MP6908AGJ-Z | Monolithic Power Systems | (Alt: MP6908AGJ-Z) RoHS : Compliant | 0 | |||
| MP6908AGJ-P | Monolithic Power Systems | (Alt: MP6908AGJ-P) RoHS : Compliant | 0 | |||
| MP6908LGJ-P | Monolithic Power Systems | Fast TurnOff Intelligent Rectifier IC 45 V to 13 V Supply TSOT236 40 C to 125 C (Alt: MP6908LGJ-P) RoHS : Compliant | 0 | |||
| C16908_ALISE-50-M | LEDIL | Alise Reflector with 24 Degree Medium Beam Aluminum Metal Color Box (Alt: C16908_ALISE-50-M) RoHS : Compliant | 0 | |||
| PI3EQX16908GLZLEX | Diodes Incorporated | RedriverEqualizer PCIe 40 3 V to 36 V Supply 40 to 85 C TQFN72 (Alt: PI3EQX16908GLZLEX) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 569088-1 | TE Connectivity | IN STOCK SHIP TODAY |
| 147 | |
| 102690-8 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 133 | ||
| 569084-4 | TE Connectivity | IN STOCK SHIP TODAY |
| 65 | ||
| 569086-4 | TE Connectivity | IN STOCK SHIP TODAY |
| 31 | ||
| 269085-2 | TE Connectivity | IN STOCK SHIP TODAY | 2 | |||
| 1469085-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
| 1469083-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
![]() DB Roberts | F6-908-5 | Southco | RoHS : Compliant |
| 1,339 | |
| 6908-SS-PL | RAF Electronic Hardware | 0 | ||||
| 1690-832-B | RAF Electronic Hardware | 0 | ||||
| SS6908-P | Heyco | SS-LOCK CRIMPLESS SUNBUNDLER 8 | 0 | |||
| 1690-832-B-16 | RAF Electronic Hardware | 0 | ||||
| 6908-SS-20 | RAF Electronic Hardware | PASS.SHOULDER SCREW,SKT HEAD,9/32HDX.125X6-32THD | 0 | |||
| 1690-832-S-42 | RAF Electronic Hardware | 0 | ||||
| 1690-832-SS | RAF Electronic Hardware | 0 | ||||
| 6908-SS | RAF Electronic Hardware | 0 | ||||
| 6908-S-12 | RAF Electronic Hardware | 0 | ||||
| 6908-S-12-PL | RAF Electronic Hardware | 0 | ||||
| 6908-SS-PL-20 | RAF Electronic Hardware | 0 | ||||
| 1690-832-S | RAF Electronic Hardware | 0 | ||||
| SS6908 | Heyco | SS-LOCK CRIMPLESS SUNBUNDLER 8 | 0 | |||
| 20546908 | Essentra Components | P0.418,0.361 C0.365,0.298SILIC | 0 | |||
![]() EBV Elektronik | C16908_ALISE-50-M | LEDIL | Alise Reflector with 24 Degree Medium Beam Aluminum Metal Color Box (Alt: C16908_ALISE-50-M) RoHS : Compliant | 0 | ||
| BSS138NH6908XTMA1 | Infineon Technologies AG | Power MOSFET N Channel 60 V 230 mA 35 Ohm SOT23 3 Pins Surface Mount (Alt: SP000924062) RoHS : Compliant | 0 | |||
| SSDSC2KB480G7 956908 | Intel Corporation | INTEL SSD DC S4500 SERIES 480GB 25IN SATA 6GBS 3D1 TLC GENERIC 50 PACK (Alt: 956908) RoHS : Compliant | 0 | |||
![]() Master Electronics | 213069-0800 | Molex | FA2 APPLICATOR - MECHANICAL FEED RoHS : Compliant |
| 0 | |
| FW-02-03-LM-D-169-089 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-269-088 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-169-082 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-269-082 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-05-G-D-469-086 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 690812-1 | TE Connectivity | INSULATION CRIMPER RoHS : Compliant |
| 0 | ||
| 690888-000 | TE Connectivity | B-004-00 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| FW-02-03-L-D-269-085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-269-080 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 690801-2 | TE Connectivity | CRIMPER-INSUL F RoHS : Not Compliant |
| 0 | ||
| 8-2176690-8 | TE Connectivity | MELF SMA-Q 9K09 0.1% 25PPM 0204 0.25W RoHS : Compliant |
| 0 | ||
| 7-1583690-8 | TE Connectivity | CRIMPER INSULATION O (.072) RoHS : Not Compliant |
| 0 | ||
| 2-2176690-8 | TE Connectivity | MELF SMA-Q 2K15 0.1% 25PPM 0204 0.25W RoHS : Compliant |
| 0 | ||
| 1-1583690-8 | TE Connectivity | CRIMPER INSULATION O RoHS : Not Compliant |
| 0 | ||
![]() Neutron USA | 1569080000 | Weidmüller Interface GmbH & Co. KG | Cable Glands, Strain Reliefs & Cord Grips VG 11-MS68 RoHS : Compliant |
| 50 | |
| 1869088 | Phoenix Contact | Fixed Terminal Blocks 4P 5mm 145DEG RoHS : Compliant |
| 50 | ||
| 8690830000 | Weidmüller Interface GmbH & Co. KG | Relay Sockets & Hardware SRC 2CO RoHS : Compliant |
| 50 | ||
| 1690880000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks BLZF 3.50/02/180F SN OR BX RoHS : Compliant |
| 50 | ||
| 6469083-1 | TE Connectivity | Hard Metric Connectors HDR 6X010P VRT B-PLANE HMZD RoHS : Compliant |
| 50 | ||
| 1416908 | Phoenix Contact | Sensor Cables / Actuator Cables SAC-5P-MINMS/5-U40/ MINFS/DeviceNet-Thck RoHS : Compliant |
| 17 | ||
| IPC-6908BP-B | Advantech Co Ltd | Chassis W/O BP W/O PSUVer.B -- No return -- |
| 2 | ||
| 2906908 | Phoenix Contact | PCBs & Breadboards ME LP |
| 0 | ||
| 1546908-1 | TE Connectivity | Receptacle Kit, Industrial Ethernet, Wire Terminated, CPC Series 45, Shielded RoHS : Compliant |
| 0 | ||
| 106908 | Basler AG | Vision Sensors acA1920-40gc |
| 0 | ||
| 1769081 | Phoenix Contact | Pluggable Terminal Blocks 9 Pos 5.08mm pitch Plug 24-12 AWG Screw RoHS : Compliant |
| 0 | ||
| 1476908 | Phoenix Contact | Sensor Cables / Actuator Cables SAC-5P-P12MS/ 0,6-PUR/P12FR SH RoHS : Compliant |
| 0 | ||
| 26908PSLA | Hammond Manufacturing | Enclosures, Boxes, & Cases EDDYSTONE ALUM 120X95X57 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C6908-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 48 Inch Length Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 48 inch length using LMR-400 coax with Times Microwave components, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3C6908-48 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C6908-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable 48 inch length using LMR-400 coax with Times Microwave components. |
| 0 | |
| PE3C6908/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C6908/HS-48 low loss 4.3-10 male to 4.3-10 male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C6908/HS-48 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6908/HS-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. This PE3C6908/HS-48 4.3-10 plug to 4.3-10 plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C6908/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. 4.3-10 Male to 4.3-10 Male Low Loss Cable Using LMR-400 Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C6908/HS low loss 4.3-10 male to 4.3-10 male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C6908/HS can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6908/HS RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. This PE3C6908/HS 4.3-10 plug to 4.3-10 plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. This low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C6908 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. 4.3-10 Male to 4.3-10 Male Low Loss Cable Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable using LMR-400 coax with Times Microwave components, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3C6908 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C6908 is built with LMR-400 which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable using LMR-400 coax with Times Microwave components. | 0 | |||
| PE3C6908/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 36 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C6908/HS-36 low loss 4.3-10 male to 4.3-10 male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C6908/HS-36 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6908/HS-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. This PE3C6908/HS-36 4.3-10 plug to 4.3-10 plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C6908LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C6908-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 60 Inch Length Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 60 inch length using LMR-400 coax with Times Microwave components, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3C6908-60 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C6908-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable 60 inch length using LMR-400 coax with Times Microwave components. |
| 0 | ||
| PE3W16908 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. TNC Female to SMA Male Cable Using LMR-240-UF Coax. PE3W16908 is a TNC female to SMA male cable using LMR-240-UF coax. This Pasternack TNC female to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our female TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16908 TNC female to SMA male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C6908/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 12 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C6908/HS-12 low loss 4.3-10 male to 4.3-10 male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C6908/HS-12 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6908/HS-12 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. This PE3C6908/HS-12 4.3-10 plug to 4.3-10 plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C6908-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 36 Inch Length Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 36 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 36 inch length using LMR-400 coax with Times Microwave components, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3C6908-36 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C6908-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable 36 inch length using LMR-400 coax with Times Microwave components. |
| 0 | ||
| PE3C6908LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. 4.3-10 Male to 4.3-10 Male Cable Using LMR-400 Coax, LF Solder. PE3C6908LF is a 4.3-10 male to 4.3-10 male cable using LMR-400 coax. This Pasternack 4.3-10 male to 4.3-10 male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our male 4.3-10 to male 4.3-10 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C6908LF 4.3-10 male to 4.3-10 male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C6908/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 24 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C6908/HS-24 low loss 4.3-10 male to 4.3-10 male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C6908/HS-24 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6908/HS-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. This PE3C6908/HS-24 4.3-10 plug to 4.3-10 plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C6908/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C6908/HS-60 low loss 4.3-10 male to 4.3-10 male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C6908/HS-60 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6908/HS-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. This PE3C6908/HS-60 4.3-10 plug to 4.3-10 plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE36908 | Pasternack Enterprises | 0 | ||||
| PE3C6908-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 12 Inch Length Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 12 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 12 inch length using LMR-400 coax with Times Microwave components, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3C6908-12 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C6908-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable 12 inch length using LMR-400 coax with Times Microwave components. |
| 0 | ||
![]() Vyrian | 69086/31/16 | NXP Semiconductors | 7,100 | |||
| MAX16908XAUE50/V+T | Analog Devices Inc | 1,350 | ||||
| LTC6908CS6-1 | Linear Technology | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Not Compliant | 120 | |||
| LTC6908HS6-1#PBF | Linear Technology | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Compliant | 100 | |||
| LTC6908IS6-2#PBF | Linear Technology | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Compliant | 69 | |||
| LTC6908CDCB-1-TRMPBF | Analog Devices Inc | 21 | ||||
| LTC6908HS62#WTRMP | Analog Devices Inc | 19 | ||||
| LTC6908CS6-2-TRMPBF | Analog Devices Inc | 16 | ||||
| LTC6908IDCB-1-TRPBF | Analog Devices Inc | 15 | ||||
| LTC6908CDCB-1#TRP | Analog Devices Inc | 13 | ||||
| LTC6908IS6-2-TRPBF | Analog Devices Inc | 10 | ||||
| LTC6908CDCB6-2#PBF | Analog Devices Inc | Analog Circuit, CMOS, PDSO6 RoHS : Compliant | 7 | |||
| LTC6908CS6-2 | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Not Compliant | 6 | |||
| LTC6908HS6-2 | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Not Compliant | 5 | |||
| LTC6908CDCB-1#PBF | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Compliant | 5 | |||
![]() Win Source Electronics | LTC6908IS6-1#TRPBF | Linear Technology | Spread Spectrum Silicon Oscillator - 0.05MHz to 10MHz CMOS/Squarewave Automotive 6-Pin TSOT-23 T/R / IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 12,500 | |
| LTC6908HS6-1#TRPBF | Analog Devices Inc | IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 12,000 | ||
| LTC6908IS6-1 | Analog Devices Inc | IC OSC SILICON PROG TSOT23-6 / IC RoHS : Not Compliant |
| 11,920 | ||
| LTC6908IS6-1#TRMPBF | Linear Technology | Spread Spectrum Silicon Oscillator - 0.05MHz to 10MHz CMOS/Squarewave Automotive 6-Pin TSOT-23 T/R / IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 11,560 | ||
| LTC6908IS6-2#TRMPBF | Analog Devices Inc | IC OSC SILICON PROG TSOT23-6 / Oscillator, Silicon IC 50kHz ~ 10MHz TSOT-23-6 RoHS : Compliant |
| 11,270 | ||
| LTC6908IS6-1#TRM | Analog Devices Inc | IC OSC SILICON PROG TSOT23-6 RoHS : Not Compliant |
| 11,160 | ||
| LTC6908CS6-1#TRPBF | Linear Technology | Spread Spectrum Silicon Oscillator - 0.05MHz to 10MHz CMOS/Squarewave Automotive 6-Pin TSOT-23 T/R / IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 9,809 | ||
| LTC6908CS6-1#TRMPBF | Linear Technology | Spread Spectrum Silicon Oscillator - 0.05MHz to 10MHz CMOS/Squarewave Automotive 6-Pin TSOT-23 T/R / IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 9,640 | ||
| LTC6908CS6-1 | Linear Technology | Resistor Set SOT-23 Oscillator with Spread Spectrum Modulation RoHS : Not Compliant |
| 8,809 | ||
| LTC6908IS6-2#TRPBF | Analog Devices Inc | IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 7,550 | ||
| 6469081-1 | TE Connectivity | CONN RCPT HIGH SPEED 60P EDGE MT RoHS : Compliant |
| 5,680 | ||
| 6469083-1 | TE Connectivity | CONN HEADER HIGH SPEED 60POS PCB RoHS : Compliant |
| 4,500 | ||
| LTC6908HS6-1 | Linear Technology | Resistor Set SOT-23 Oscillator with Spread Spectrum Modulation RoHS : Not Compliant |
| 2,500 | ||
| LTC6908HS6-1#TRMPBF | Linear Technology | Spread Spectrum Silicon Oscillator - 0.05MHz to 10MHz CMOS/Squarewave Automotive 6-Pin TSOT-23 T/R / IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 2,330 | ||
| MP6908GJ-Z | Monolithic Power Systems | FAST TURN-OFF INTELLIGENT RECTIF RoHS : Compliant |
| 167 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |