| データシートサーチシステム |
|
6SPA-D6-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() TME | N0Y45L16SPC | Brightek Optoelectronic Co Ltd | LED; 10mm; yellow; 11000÷16500(typ)-32000mcd; 25°; Front: convex |
| 4,611 | |
| IR2106SPBF | Infineon Technologies AG | IC: driver; MOSFET half-bridge; high-/low-side,gate driver; SO8 RoHS : Compliant |
| 29 | ||
| 58.33.8.230.006SPA | FINDER SpA | Relay: interface; Ucoil: 230VAC; 3PDT; 20A; 10A/250VAC; 10A/24VDC |
| 0 | ||
| 03KR-6S-P | JST Manufacturing | Connector: IDC; KR; plug; female; data; 1A; 100V; PIN: 3; 2mm; 1x3 |
| 0 | ||
| 58.32.8.024.006SPB | FINDER SpA | Relay: interface; Ucoil: 24VAC; DPDT; 20A; 10A/250VAC; 10A/24VDC |
| 0 | ||
| 58.33.8.024.006SPB | FINDER SpA | Relay: interface; Ucoil: 24VAC; 3PDT; 20A; 10A/250VAC; 10A/24VDC |
| 0 | ||
| 58.33.8.230.006SPB | FINDER SpA | Relay: interface; Ucoil: 230VAC; 3PDT; 20A; 10A/250VAC; 10A/24VDC |
| 0 | ||
| 58.32.8.230.006SPA | FINDER SpA | Relay: interface; Ucoil: 230VAC; DPDT; 20A; 10A/250VAC; 10A/24VDC |
| 0 | ||
| 58.32.8.024.006SPA | FINDER SpA | Relay: interface; Ucoil: 24VAC; DPDT; 20A; 10A/250VAC; 10A/24VDC |
| 0 | ||
| 58.32.8.120.006SPB | FINDER SpA | Relay: interface; Ucoil: 120VAC; DPDT; 20A; 10A/250VAC; 10A/24VDC |
| 0 | ||
| 58.33.8.024.006SPA | FINDER SpA | Relay: interface; Ucoil: 24VAC; 3PDT; 20A; 10A/250VAC; 10A/24VDC |
| 0 | ||
CDS-4051-16-SP![]() | Same Sky | Loudspeaker; general purpose; 1W; 16Ω; Ø40x5.1mm; 6kHz; Ø: 40mm; PET RoHS : Compliant |
| 0 | ||
| DMT6006SPS-13 | Diodes Incorporated | Transistor: N-MOSFET; unipolar; 60V; 13A; Idm: 390A; 2.45W RoHS : Compliant |
| 0 | ||
| MSPM0G1506SPMR | Texas Instruments | IC: ARM microcontroller; 80MHz; LQFP64; 32kBRAM,64kBFLASH; DALI RoHS : Compliant |
| 0 | ||
| RNF-100-3/16-6-SP | TE Connectivity | Heat shrink sleeve; glueless,flexible; 2: 1; 4.8mm; blue; RNF-100 RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | LR G6SP-CBEA-1-1-Z | ams OSRAM Group | LED Uni-Color Red 24lm 634nm Chip LED 6-Pin PLCC T/R - Tape and Reel (Alt: Q65111A0536) RoHS : Compliant |
| 7,000 | |
| LA G6SP-DAEB-24-1-Z | ams OSRAM Group | - Tape and Reel (Alt: Q65111A8692) RoHS : Compliant |
| 6,000 | ||
| LY G6SP-CADB-36-1-Z | ams OSRAM Group | - Tape and Reel (Alt: Q65110A4721) RoHS : Compliant | 1,000 | |||
| BS-32-6S-P | 3M Interconnect | - Bulk (Alt: 7100163612) RoHS : Compliant |
| 65 | ||
| 6SP | Tripp Lite | - Bulk (Alt: 6SP) RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-2439 | Samtec Inc | Cable Assembly RG58 2.439m Type N to Type N PL-PL - Bulk (Alt: RF058-06SP2-06SP2-2439) RoHS : Compliant |
| 0 | ||
| RF058-06SP3-06SP3-0200 | Samtec Inc | Cable Assembly RG58 0.2m Type N to Type N PL-PL - Bulk (Alt: RF058-06SP3-06SP3-0200) RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-0500 | Samtec Inc | - Bulk (Alt: RF058-06SP2-06SP2-0500) RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-0203 | Samtec Inc | Cable Assembly RG58 0.203m Type N to Type N PL-PL - Bulk (Alt: RF058-06SP2-06SP2-0203) RoHS : Compliant |
| 0 | ||
| RF058-06SP3-06SP3-0500 | Samtec Inc | Cable Assembly RG58 0.5m Type N to Type N PL-PL - Bulk (Alt: RF058-06SP3-06SP3-0500) RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-0914 | Samtec Inc | Cable Assembly RG58 0.914m Type N to Type N PL-PL - Bulk (Alt: RF058-06SP2-06SP2-0914) RoHS : Compliant |
| 0 | ||
| RF058-06SP3-06SP3-0310 | Samtec Inc | Cable Assembly RG58 0.31m Type N to Type N PL-PL - Bulk (Alt: RF058-06SP3-06SP3-0310) RoHS : Compliant |
| 0 | ||
| RF058-06SP3-06SP3-2000 | Samtec Inc | Cable Assembly RG58 2m Type N to Type N PL-PL - Bulk (Alt: RF058-06SP3-06SP3-2000) RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-1000 | Samtec Inc | - Bulk (Alt: RF058-06SP2-06SP2-1000) RoHS : Compliant |
| 0 | ||
| RF058-06SP3-06SP3-0460 | Samtec Inc | Cable Assembly RG58 0.46m Type N to Type N PL-PL - Bulk (Alt: RF058-06SP3-06SP3-0460) RoHS : Compliant |
| 0 | ||
![]() Newark | LB G6SP-BACB-35-47 | ams OSRAM Group | Led, Smd, 0.65W, Blue; |Ams Osram Group LB G6SP-BACB-35-47 RoHS : Compliant |
| 708 | |
| LB G6SP-BACB-35-47 | ams OSRAM Group | Led, Smd, 0.65W, Blue; |Ams Osram Group LB G6SP-BACB-35-47 RoHS : Compliant |
| 708 | ||
| 6SP | Tripp Lite | Ext Lead, 6Outlets, Nema 5-15R, 15A; |Eaton Tripp Lite 6SP RoHS : Not Compliant |
| 84 | ||
| IO-C6SP-28 | Io Audio Technologies | Pwr Conn Iec, Iec C6 Inlet, 2.5A, 250Vac; |Io Audio Technologies IO-C6SP-28 RoHS : Compliant |
| 59 | ||
| GTB6SP-22A1116EZZZ | SICK AG | Photoelectric Sensor, 400Mm, Pnp; |Sick GTB6SP-22A1116EZZZ RoHS : Compliant |
| 6 | ||
| 89098326SP | nVent Hoffman | Mtr Protector Spare Part; |Nvent Hoffman 89098326SP RoHS : Compliant |
| 4 | ||
| PKZM0-1,6-SPI32 | Eaton Corporation | Thermal Mag Ckt Breaker, 3P, 1.6A, 690V; |Eaton Moeller PKZM0-1,6-SPI32 RoHS : Compliant |
| 4 | ||
| 10101686SP | nVent Hoffman | Comp Rka5454Yxa 115V; |Nvent Hoffman 10101686SP RoHS : Compliant |
| 3 | ||
| 52615506SP | nVent Hoffman | Tstat A19Abc 4D 50 130F Spdt; |Nvent Hoffman 52615506SP RoHS : Compliant |
| 3 | ||
| 89118486SP | nVent Hoffman | Relay Overload 4.5 To 6.3A; |Nvent Hoffman 89118486SP RoHS : Compliant |
| 2 | ||
| 89097986SP | nVent Hoffman | Phase Monitor Spare Part; |Nvent Hoffman 89097986SP RoHS : Compliant |
| 2 | ||
| PKZM0-0,16-SPI16 | Eaton Corporation | Thermal Mag Ckt Breaker, 3P, 0.16A, 690V; |Eaton Moeller PKZM0-0,16-SPI16 RoHS : Compliant |
| 2 | ||
| AL-KH6SP | IDEC Corporation | Finger Guard, Miniature Switch; |Idec AL-KH6SP RoHS : Compliant |
| 1 | ||
| 89109026SP | nVent Hoffman | Compr 115V Mitsubishi; |Nvent Hoffman 89109026SP RoHS : Compliant |
| 1 | ||
| GLD6SP-22A1217EZZZ | SICK AG | Photoelectric Sensor, 6M, Pnp; |Sick GLD6SP-22A1217EZZZ RoHS : Compliant |
| 1 | ||
![]() RS | 2196SP | Heyco | UNIVERSAL BUSHING, NYLON 6/6, BLACK, MOUNTING HOLE SIZE 0.625 IN, SB SERIES |
| 1,006 | |
| 6SP | Waber by Tripp Lite | POWER STRIP, BASIC,6 OUTLETS, WALL/DESK MNT, CUR-RTG 15A,6FT. CORD, VOL-RTG 120VAC |
| 122 | ||
| N-SB4 (COMP-36-SPC) | Dantona Industries Inc | BATTERY, NON-RECHARGEABLE, CYLINDRICAL, NICKEL-CADMIUM,4.8VDC,90MAH |
| 44 | ||
| PX0413/06S/PC | Bulgin | CONNECTOR, CIRCULAR IP68, 6, CRIMP, SOLDER AND PCB, 5 A, 125 VAC/VDC, GOLD RoHS : Compliant |
| 42 | ||
| A490-367461-06 (SPRING KIT - #11HD) | Guardian Electric Manufacturing Company | SPRING KIT FOR SOLENOIDS, USE WITH MODEL 11HD |
| 30 | ||
| AL-KH6SP | IDEC Corporation | ACCESSORY, SWITCH GUARD, RECTANGULAR, UL RECOGNIZED, CSA CERTIFIED, RECTANGULAR |
| 19 | ||
| SM06-SP50 (445064750) | OMRON Industrial Automation | SPRING FOR RK KITS STAINLESS STEEL |
| 12 | ||
| IO-C6SP-28 | Io Audio Technologies | CONNECTOR, IEC C6,SCREW ON, PANEL MOUNT, BLADE TERMINALS,2.8MM,3 CONTACTS,10A/250V |
| 2 | ||
| DX80N9X6S-P8C (18809) | Banner Engineering Corp | WIRELESS NODE, 900 MHZ, 1W, M12, IP20 NEMA 1, RS-485, 18809, DX80 SERIES |
| 2 | ||
| 36CB5001A06SP-GLD | Baldor Electric Company | CONDUIT BOX KIT (36CB3004) GOLD PAINT |
| 1 | ||
| DX80N9X6S-P8 (17457) | Banner Engineering Corp | NODE 900MHZ, 1W, IP67, 10-30VDCEXT ANTENN, DX80 PERFORMANCE SERIES |
| 1 | ||
| DX80N9X6S-PM8 (87106) | Banner Engineering Corp | WIRELESS NODE, 900 MHZ, LCD, 6 NPN/PNP IN, 6 PNP OUT, IP67, 87106, PM SERIES |
| 1 | ||
| DX80N2X6S-PB2 (25759) | Banner Engineering Corp | NODE 2.4GHZ, 65MW, 10-30VDC, EXT ANTENNA, DX80 PERFORMANCE SERIES |
| 1 | ||
| DX80G9M6S-PM8 (87098) | Banner Engineering Corp | WIRELESS GATEWAY, 900 MHZ, 6 DISCRETE I/O, 10-30VDC, IP67, PM SERIES |
| 1 | ||
| 111-00290 MBT14SFC-SS316/SP-BK (100) (7056413) | HellermannTyton | CABLE TIE, BLACK POLYESTER COATED STAINLESS STEEL ROLLER BALL, MBT14SFC SERIES |
| 1 | ||
![]() STMicroelectronics | LNBH26SPQR | STMicroelectronics | Dual LNB supply and control IC with step-up and I²C interface RoHS : Compliant |
| 5,080 | |
| STTH30M06SPF | STMicroelectronics | 600V, 30A, Ultrafast diode RoHS : Compliant |
| 908 | ||
![]() Bisco Industries | #6SPL ST BO | WASHERS | 27,500 | |||
| #6SPL SS BO | WASHERS | 24,320 | ||||
| 40054-006-16SPL | SOCKET SCREWS | 6,600 | ||||
| 40045-016-16SPL | SOCKET SCREWS | 6,279 | ||||
| 7/16SPL ST ZC | WASHERS | 2,550 | ||||
| 9/16SPL ST NL | WASHERS | 925 | ||||
| NL6SPSS | NORD-LOCK International AB | 697 | ||||
| #6SPL SS PL | WASHERS | 593 | ||||
| #6SPL LGT 304SS PS | WASHERS | 500 | ||||
| 4-40X1/8SETCP SS 6SPN | SOCKET SCREWS | 500 | ||||
| 6-32X1 1/16SPDBLT ST ZC | BOLTS | 99 | ||||
| 5/16SPL ST C2 | WASHERS | 39 | ||||
| ST302-36 SPLIT WASHER | Lyn-Tron Inc | 31 | ||||
| RC00396SPK | MISCELLANEOUS | 31 | ||||
| NL16SPSS | NORD-LOCK International AB | 9 | ||||
![]() Rochester Electronics | 2SC3646S-P-TD-E | onsemi | Trans BJTs PCP RoHS : Compliant |
| 21,000 | |
| IR2136SPBF | Infineon Technologies AG | Half Bridge Based MOSFET Driver, 0.35A, CMOS, PDSO28 RoHS : Compliant |
| 4,723 | ||
| CY9BF216SPMC-GK7E1 | Infineon Technologies AG | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 512kB (512k x 8) 144MHz 144-QFP Tray RoHS : Compliant |
| 1,200 | ||
| IR7106SPBF | Infineon Technologies AG | Gate Driver IGBT, N-Channel MOSFET 2 Driver Half-Bridge 8-SOIC Tube RoHS : Compliant |
| 88 | ||
| MB9BF216SPMC-GE1 | Cypress Semiconductor | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 512kB (512k x 8) 144MHz 144-QFP Tray RoHS : Not Compliant |
| 25 | ||
| M38504E6SP#U1 | Renesas Electronics Corporation | IC MCU 740 8Bit 1 Core EPROM 24kB (24k x 8) 8MHz 42-DIP Tube RoHS : Compliant |
| 38 | ||
| R2A15906SP#W2 | Renesas Electronics Corporation | Mixed Signal Audio Sound Controller RoHS : Compliant |
| 9,000 | ||
| R8A66156SP#D1 | Renesas Electronics Corporation | IC SPI 24 I/O 1.9MHz 2V - 6V 36-SOP RoHS : Compliant |
| 21,897 | ||
| R8A66156SP#T1 | Renesas Electronics Corporation | R8A66156SP 24-Bit I/O Expander with LED Drive Function RoHS : Compliant |
| 5,682 | ||
| STTH31AC06SPF | STMicroelectronics | Rectifier Single Standard 600V 30A TO-3P-3 Tube RoHS : Compliant |
| 495 | ||
| TC74VCXH16646(SP,F | Toshiba America Electronic Components | INTEGRATED CIRCUIT (OTHER) RoHS : Compliant |
| 900 | ||
| LA G6SP-DBEA-24-1-140-R18-Z | ams OSRAM Group | LA G6SP - Advanced Power TOPLED, Amber LED RoHS : Compliant |
| 28,000 | ||
| LR G6SP.01-5E7E-46-G3R3-140-R18-XX | ams OSRAM Group | LR G6SP.01 - Advanced Power TOPLED, Red RoHS : Compliant |
| 2,961 | ||
| LS G6SP.01-7C5E-D1-G3R3-140-R18-Z | ams OSRAM Group | LS G6SP.01 - Advanced Power TOPLED , Super Red LED RoHS : Compliant |
| 129,000 | ||
| LY G6SP.02-8D5F-36-G3R3-140-R18 | ams OSRAM Group | Advanced Power TOPLED RoHS : Compliant |
| 42,000 | ||
![]() Sager | RF058-06SP2-06SP2-2439 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 58 Cable RoHS : Compliant |
| 0 | |
| RF058-06SP2-06SP2-7500 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| RF058-06SP2-06SP3-1000 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| RF058-06SP3-06SP3-0200 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-0254 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| RF058-06SP2-06SP2-6096 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| RF058-06SP3-06SP3-0100 | Samtec Inc | D-Sub Standard Connectors RoHS : Compliant | 0 | |||
| RF058-06SP2-06SP2-0500 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-3048 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| RF058-06SP2-06SP2-5000 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| RF058-06SP2-06SP2-0203 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-0410 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| RF058-06SP3-06SP3-0500 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP3-06SP3-5000 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| RF058-06SP2-06SP2-0914 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 58 Cable RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | LAB6SPEBFB24G3R3140AL | OSRAM GmbH | AVAILABLE EU | 77,348 | ||
| LAG6SP017E6F24G3R3140R1 | OSRAM GmbH | AVAILABLE EU | 112,183 | |||
| LAG6SPDAEA241140R18Z | OSRAM GmbH | AVAILABLE EU | 191,382 | |||
| LAG6SPEA243B | USI-OSRAM | AVAILABLE EU | 50,139 | |||
| LAG6SPEAFA243A4B140R18Z | OSRAM GmbH | AVAILABLE EU | 208,000 | |||
| LAG6SPEB243B | USI-OSRAM | AVAILABLE EU | 20,523 | |||
| LYG6SPDADB561 | OSRAM GmbH | AVAILABLE EU | 63,582 | |||
![]() ComSIT USA | LRG6SPDAEA11Z | OSRAM GmbH | LED Red 1 LED Clear 6-LCC RoHS : Compliant | 30,000 | ||
| LWG6SPEAFAJKLL1Z | OSRAM GmbH | Light Emitting Diode (LED), OSRAM, white, SMD package RoHS : Compliant | 10,000 | |||
| LWG6SPEA0L5 | OSRAM GmbH | ADVANCED POWER TOPLED Single Color LED, White, 2.6mm RoHS : Compliant | 10,000 | |||
| LAG6SPDBEB241140R18Z | OSRAM GmbH | LED Amber 1 LED Clear 6-LCC T/R RoHS : Compliant | 10,000 | |||
| LWG6SPEAPK4 | OSRAM GmbH | ADVANCED POWER TOPLED Single Color LED, White, 2.6mm RoHS : Compliant | 7,000 | |||
| LAG6SPDB23B | OSRAM GmbH | ADVANCED POWER TOPLED Single Color LED, Amber, 2.6mm RoHS : Compliant | 3,000 | |||
| LWG6SPEBNL5 | OSRAM GmbH | ADVANCED POWER TOPLED Single Color LED, White, 2.6mm RoHS : Compliant | 3,000 | |||
| LYG6SP | OSRAM GmbH | Single Color LED, Yellow, 2.6mm RoHS : Compliant | 3,000 | |||
| LAB6SPDBEB24G3R3ZAL | OSRAM GmbH | LED Amber 1 LED Clear 2-SMD RoHS : Compliant | 1,200 | |||
| LYG6SPDAEA51ZVL | OSRAM GmbH | Light Emitting Diode (LED), OSRAM, surface mount RoHS : Compliant | 1,000 | |||
| VS8ETL06SPBF | Vishay Intertechnologies | 8 A FRED PT, ULTRALOW VF HYPERFAST RECTIFIER FOR DISCONTINUOUS MODE PFC Rectifier Diode, 1 Phase, 1 Element, 8A, 600V V(RRM), Silicon RoHS : Compliant | 1,000 | |||
| LAG6SPT112BDW43B | OSRAM GmbH | ADVANCED POWER TOPLED Single Color LED, Amber, 2.6mm RoHS : Compliant | 995 | |||
IR2136SPBF![]() | International Rectifier | 3-PHASE BRIDGE DRIVER Half Bridge Based MOSFET Driver, 0.35A, CMOS, PDSO28 RoHS : Compliant | 793 | |||
| M30626SPFPU5C | Renesas Electronics Corporation | SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER Microcontroller, 16-Bit, M16C CPU, 24MHz, CMOS, PQFP100 RoHS : Compliant | 330 | |||
| IR1196SPBF | International Rectifier | Electronic Component RoHS : Compliant | 190 | |||
![]() Interstate Connecting Components | 10127721-166SPLF | Amphenol FCi | 10127721-166SPLF-MTK 3.0 16P D | 0 | ||
| TVBB2116SPN | Amphenol PCD | TVB | 0 | |||
| FRITSG4106SP14S-2SM15 | Glenair Inc | 0 | ||||
| FRITSG4106SP20-29SZB1M | Glenair Inc | 0 | ||||
| FRITSG4106SP24-19PB1F1 | Glenair Inc | 0 | ||||
| CGPT-12/4-6-SP | TE Connectivity | 22759/34-6-9 RoHS : Compliant | 0 | |||
| CGPT-4.8/2.4-6-SP.M | TE Connectivity | CGPT-4.8/2.4-6-SP | 0 | |||
| IPT01C16-26SPG16N4F2 | Glenair Inc | 0 | ||||
| IPT06A20-16SPG16F7 | Glenair Inc | 0 | ||||
| IPT08A16-26SPHM11F11 | Glenair Inc | 0 | ||||
| SP06SP-18-30P(023) | Amphenol Industrial Operations | PLUG | 0 | |||
| PT06SP-10-6P(001) | Amphenol Industrial Operations | PLUG | 0 | |||
| PT06SP-10-6P(371) | Amphenol Industrial Operations | PLUG | 0 | |||
| PT06SP-12-3P(SR\\LC) | Amphenol Industrial Operations | PLUG | 0 | |||
| PT06SP-12-3S | Amphenol Industrial Operations | PLUG | 0 | |||
![]() PEI Genesis | PT06SP12-10PW-005 | Amphenol Corporation |
| 0 | ||
| PT02SE16-26S-P288 | Amphenol Corporation |
| 0 | |||
| PT06SP12-8P | Amphenol Corporation |
| 0 | |||
| PT06SP10-6S | Amphenol Corporation |
| 0 | |||
| PT06SP22-41P | Amphenol Corporation |
| 0 | |||
| BTV00RW-17-6SP | Amphenol Corporation |
| 0 | |||
| PT06SP14-5P | Amphenol Corporation |
| 0 | |||
| PT06SP12-10PY-005 | Amphenol Corporation |
| 0 | |||
| PT06SP12-10P | Amphenol Corporation |
| 0 | |||
| PT06SP12-10PX-005 | Amphenol Corporation |
| 0 | |||
| PT06SP14-15S | Amphenol Corporation |
| 0 | |||
| PT06SP10-6SW | Amphenol Corporation |
| 0 | |||
| PT06SP12-8S | Amphenol Corporation |
| 0 | |||
| PT02SE10-6S-P288 | Amphenol Corporation |
| 0 | |||
| PT06SP22-55S | Amphenol Corporation |
| 0 | |||
![]() DB Roberts | PIN5/64X9/16-SP-SS | PIN |
| 6,000 | ||
| PIN1/8X7/16-SP-420SS | PIN |
| 3,550 | |||
| 2196SP | Heyco | OCUB 1250 BLACK |
| 2,286 | ||
| PIN1/16X3/16-SP-SS | PIN |
| 986 | |||
| PIN1/16X5/16-SP-SS | PIN |
| 392 | |||
| PINM10X26-SP-STL | PIN | SPRING PIN PLAIN STEEL M10 X 26 |
| 334 | ||
| PIN3/16X9/16-SP-STL-ZI | PIN |
| 273 | |||
| PIN1/16X3/16-SP-420SS | PIN |
| 260 | |||
| PIN1/8X9/16-SP-SS | PIN |
| 40 | |||
| PIN1/4X9/16-SP-STL | PIN |
| 4 | |||
![]() Flip Electronics | 2SC3646S-P-TD-E | onsemi | Stock, Ship Today | 3,000 | ||
M30626SPFP#U3C![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 511 | |||
![]() Master Electronics | 6SP | Tripp Lite | Waber-by-Tripp Lite 6-Outlet (41.3 mm center-to-center spacing) Industrial Power Strip 6-ft. Cord RoHS : Compliant |
| 5 | |
| RF058-06SP2-06SP2-2439 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP3-06SP3-0200 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-0500 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-0203 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP3-06SP3-0500 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-0914 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP3-06SP3-0310 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP3-06SP3-2000 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-1000 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP3-06SP3-0460 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP3-06SP3-3810 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-3000 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-1500 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
| RF058-06SP2-06SP2-6000 | Samtec Inc | 50 Ohm RF Cable Assembly RG 58 Cable RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W11736/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 60 Inch Length Using LMR-200-FR Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 60 inch length using LMR-200-FR coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 60 inch length using LMR-200-FR coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W11736/SP-60 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W11736/SP-60 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 165 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W11736/SP-60 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 107 | |
| PE3W11736/SP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-200-FR Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 24 inch length using LMR-200-FR coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 24 inch length using LMR-200-FR coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W11736/SP-24 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W11736/SP-24 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 165 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W11736/SP-24 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 107 | ||
| PE3W11736/SP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-200-FR Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 48 inch length using LMR-200-FR coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 48 inch length using LMR-200-FR coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W11736/SP-48 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W11736/SP-48 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 165 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W11736/SP-48 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 107 | ||
| PE3W11736/SP-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 72 Inch Length Using LMR-200-FR Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 72 inch length using LMR-200-FR coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 72 inch length using LMR-200-FR coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W11736/SP-72 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W11736/SP-72 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 165 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W11736/SP-72 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 107 | ||
| PE3W08126/SP | Pasternack Enterprises | 0 | ||||
| PE3W10576/SP1 | Pasternack Enterprises | 0 | ||||
| PE3W07196/SP1 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMB Plug Right Angle to SMB Jack Bulkhead Cable Using LMR-195 Coax., Radio frequency assembly SMB plug right angle to SMB jack bulkhead cable using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug right angle to SMB jack bulkhead cable using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and SMB bulkhead cable connection on the other. Our right angle SMB to SMB cable assemblies have a plug gender on end 1 and jack on end 2. This SMB to SMB cable is a plug to jack coax assembly, PE3W07196/SP1, can also be known as a right angle SMB male to SMB female cable assembly and will be shipped same-day as it is purchased. SMB male to SMB female cable assembly PE3W07196/SP1 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMB right angle plug to SMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07196/SP1 can also be used in the other direction and will be SMB jack bulkhead to right angle SMB plug cable assembly if the opposite connectivity is required. SMB right angle male to SMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug right angle to SMB jack bulkhead cable using LMR-195 coax. | 0 | |||
| PE3W05056/SP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to Push-On SMP Female Right Angle Cable 24 Inch Length Using RG316 Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to push-on SMP female right angle cable 24 inch length using RG316 coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to push-on SMP female right angle cable 24 inch length using RG316 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a right angle SMP cable connection on the other. Our right angle SMA to right angle SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W05056/SP-24 can also be known as a right angle SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W05056/SP-24 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our right angle SMA male to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA plug to SMP jack cable assembly PE3W05056/SP-24 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05056/SP-24 can also be used in the other direction and will be a right angle SMP female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE3W25936/SP | Pasternack Enterprises | 0 | ||||
| PE38146/SP | Pasternack Enterprises | 0 | ||||
| PE3W05056/SP1 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Push-On SMP Female Right Angle Cable Using RG316 Coax with 270 Deg. Clock., Radio frequency assembly SMA male right angle to push-on SMP female right angle cable using RG316 coax with 270 deg. clock from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to push-on SMP female right angle cable using RG316 coax with 270 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMP cable connection on the other. Our right angle SMA to right angle SMP cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMP cable is a male to female coax assembly, PE3W05056/SP1, can also be known as a right angle SMA plug to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMP jack cable assembly PE3W05056/SP1 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05056/SP1 can also be used in the other direction and will be right angle SMP female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to push-on SMP female right angle cable using RG316 coax with 270 deg. clock. | 0 | |||
| PE3W00266/SP1 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Right Angle Cable Using LMR-200 Coax with HeatShrink and 270 Deg. Clock., Radio frequency assembly TNC male right angle to TNC male right angle cable using LMR-200 coax with heatshrink and 270 deg. clock from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male right angle to TNC male right angle cable using LMR-200 coax with heatshrink and 270 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3W00266/SP1, can also be known as a right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W00266/SP1 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male right angle cable using LMR-200 coax with heatshrink and 270 deg. clock. | 0 | |||
| PE3W07886/SP | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to MCX Plug Right Angle Cable Using RG174 Coax with 90 Deg. Clock., Radio frequency assembly TNC female bulkhead to MCX plug right angle cable using RG174 coax with 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female bulkhead to MCX plug right angle cable using RG174 coax with 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to MCX cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and right angle MCX cable connection on the other. Our TNC to right angle MCX cable assembly has female gender on end 1 and plug on end 2. PE3W07886/SP can also be known as a TNC jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE dielectric type. TNC jack to MCX male cable assembly PE3W07886/SP is built with RG174 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W07886/SP RF cable are available on our downloadable PDF datasheet.PE3W07886/SP can also be used in the other direction and will be right angle MCX plug to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to MCX cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC RF cable assembly as per your requirements. | 0 | |||
| PE3C7916/SP | Pasternack Enterprises | 0 | ||||
| PE3476/SP | Pasternack Enterprises | 0 | ||||
![]() Vyrian | VB326SP13TR![]() | STMicroelectronics | Buffer/Inverter Based Peripheral Driver, 9A, PDSO10 RoHS : Compliant | 12,874 | ||
VN06SPTR-E![]() | STMicroelectronics | Buffer/Inverter Based Peripheral Driver, 1 Driver, 0.18A, PDSO10 RoHS : Compliant | 12,830 | |||
| VB526SPTR-E | STMicroelectronics | Buffer/Inverter Based Peripheral Driver RoHS : Compliant | 12,468 | |||
VN06SP![]() | STMicroelectronics | Buffer/Inverter Based Peripheral Driver, 1 Driver, 1.4A, PDSO10 RoHS : Compliant | 10,749 | |||
VB326SP![]() | STMicroelectronics | Buffer/Inverter Based Peripheral Driver, 9A, PDSO10 RoHS : Compliant | 10,583 | |||
| VB326SP-E | STMicroelectronics | 9,272 | ||||
TMS320F28376SPTPS![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, TMS320 CPU, 200MHz, CMOS, PQFP176 RoHS : Compliant | 8,819 | |||
| VB326SPTR-E | STMicroelectronics | 7,458 | ||||
| X5LS20216SPGEQQ1 | Texas Instruments | 7,453 | ||||
| VB526SP-E | STMicroelectronics | RoHS : Compliant | 6,332 | |||
| TMS320F28376SPTPQ | Texas Instruments | RISC Microcontroller, CMOS RoHS : Unknown | 5,615 | |||
| TMS320F28376SPTP | Texas Instruments | RISC Microcontroller, CMOS | 4,843 | |||
VN06SP-E![]() | STMicroelectronics | Buffer/Inverter Based Peripheral Driver, 1 Driver, 0.18A, PDSO10 RoHS : Compliant | 4,832 | |||
TMS320F28376SPTPT![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, TMS320 CPU, 200MHz, CMOS, PQFP176 RoHS : Compliant | 4,701 | |||
VN06SP13TR![]() | STMicroelectronics | Buffer/Inverter Based Peripheral Driver, 1 Driver, 1.4A, PDSO10 RoHS : Compliant | 4,601 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |