| データシートサーチシステム |
|
7580L-AB3-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() TME | 6367580-2 | TE Connectivity | Connector: DIN 41612; plug; male; data; PIN: 36; angled; THT; 2.54mm RoHS : Compliant |
| 216 | |
| Y5634-201-03758000 | TE Connectivity | Connector: circular; Automotive |
| 62 | ||
| ZFM-7580-50 | igus Inc | Bearing: slide; sleeve; with flange; Øout: 80mm; Øint: 75mm; L: 50mm |
| 5 | ||
| 05075801001 | Wera | Wrench: torque; 244mm; 2÷12Nm; Holder: hexagonal; 1/4" |
| 2 | ||
| 05075800001 | Wera | Wrench: torque; 244mm; 2÷12Nm; Holder: square; 1/4" |
| 1 | ||
| 1127580000 | Weidmüller Interface GmbH & Co. KG | Relay: solid state; SPST-NO; Ucntrl: 120VAC,120VDC; 1A; TOZ; IP20 |
| 0 | ||
| 05066758001 | Wera | Screwdriver bit: Tri-Wing®; TW0; 1/4"; Overall len: 25mm |
| 0 | ||
| 2437580000 | Weidmüller Interface GmbH & Co. KG | Marker: cable-heat shrinkable; 50.4mm; yellow RoHS : Compliant |
| 0 | ||
TPS75801KC![]() | Texas Instruments | IC: voltage regulator; LDO,adjustable; 1.22÷5V; 3A; TO220-5; THT RoHS : Compliant |
| 0 | ||
TPS75801KTTR![]() | Texas Instruments | IC: voltage regulator; LDO,adjustable; 1.22÷5V; 3A; D2PAK-5; SMD RoHS : Compliant |
| 0 | ||
| ZSM-7580-50 | igus Inc | Bearing: slide; sleeve; Øout: 80mm; Øint: 75mm; L: 50mm; iglidur® Z |
| 0 | ||
| XSM-7580-60 | igus Inc | Bearing: slide; sleeve; Øout: 80mm; Øint: 75mm; L: 60mm; iglidur® X |
| 0 | ||
| ZFM-758094-65 | igus Inc | Bearing: slide; sleeve; with flange; Øout: 80mm; Øint: 75mm; L: 65mm |
| 0 | ||
| XFM-7580-50 | igus Inc | Bearing: slide; sleeve; with flange; Øout: 80mm; Øint: 75mm; L: 50mm |
| 0 | ||
| 2847580000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; A; 24A; 800V; push-in; yellow-black; wemid RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | 105-0758-001 | Bel Fuse | - Bag (Alt: 105-0758-001) RoHS : Compliant |
| 331 | |
| MR7580-15PBSU-MC298 | Glenair Inc | - Bulk (Alt: MR7580-15PBSU-MC298) RoHS : Not Compliant | 259 | |||
| 5962F8775802VXC | STMicroelectronics | - Bulk (Alt: RHFAC245K01V) RoHS : Not Compliant | 13 | |||
| MR7580-51SBSU-MC298 | Glenair Inc | - Bulk (Alt: MR7580-51SBSU-MC298) RoHS : Not Compliant | 12 | |||
| MR7580-51PBSU-MC298 | Glenair Inc | - Bulk (Alt: MR7580-51PBSU-MC298) RoHS : Not Compliant | 9 | |||
| GMR7580-100P2ASU | Glenair Inc | Micro D-Sub Connector PIN 100 Position Straight Through Hole - Rail/Tube (Alt: GMR7580-100P2ASU) RoHS : Not Compliant | 7 | |||
| GMR7580-51P3BSU | Glenair Inc | - Bulk (Alt: GMR7580-51P3BSU) RoHS : Not Compliant | 6 | |||
| 5962F8775802VXA | STMicroelectronics | - Bulk (Alt: RHFAC245K02V) RoHS : Not Compliant | 4 | |||
| MR7580-15P2AR | Glenair Inc | - Bulk (Alt: MR7580-15P2AR) RoHS : Not Compliant |
| 1 | ||
| 7580 | 3M Interconnect | 7580 - Bag (Alt: 7000127455) RoHS : Not Compliant |
| 0 | ||
| 2847580000 | Weidmüller Interface GmbH & Co. KG | AL4C 2.5 FE - Bulk (Alt: 2847580000) RoHS : Not Compliant |
| 0 | ||
| 87758-0647 | Molex | - Trays (Alt: 0877580647) RoHS : Compliant |
| 0 | ||
| 6367580-2 | TE Connectivity | - Bag (Alt: 6367580-2) RoHS : Compliant |
| 0 | ||
| 0475800000 | Weidmüller Interface GmbH & Co. KG | - Bag (Alt: 0475800000) RoHS : Compliant | 0 | |||
| B88069X7580B502 | TDK Corporation | - Trays (Alt: B88069X7580B502) RoHS : Compliant |
| 0 | ||
![]() Newark | 87758-0416 | Molex | Board-To-Board Connector, Square Pin, Mi; |Molex 87758-0416 (Alternate Part Number: 822348273522 RoHS : Compliant |
| 2,133 | |
| ST7580TR | STMicroelectronics | Ethernet Controller, Vfqfpn-48; |Stmicroelectronics ST7580TR RoHS : Compliant |
| 1,396 | ||
| ST7580TR | STMicroelectronics | Ethernet Controller, Vfqfpn-48; |Stmicroelectronics ST7580TR RoHS : Compliant |
| 1,396 | ||
| 2787580000 | Weidmüller Interface GmbH & Co. KG | Terminal Block, Wtb, 3Pos, 24A, 630V; |Weidmuller 2787580000 RoHS : Compliant |
| 576 | ||
| 79758-0013 | Molex | Cable Assy, Crimp Pin-Pin, Red, 300Mm; |Molex 79758-0013 (Alternate Part Number: 884982052772 RoHS : Compliant |
| 330 | ||
| 79758-0011 | Molex | Cable Assy, Crimp Skt-Skt, Black, 300Mm; |Molex 79758-0011 (Alternate Part Number: 884982052758 RoHS : Not Compliant |
| 282 | ||
| 1758076 | Phoenix Contact | Terminal Block, Header, 8Pos, Th; |Phoenix Contact 1758076 RoHS : Compliant |
| 249 | ||
| 2675801202 | Fair-Rite Products Corp | Suppression Core, 1.188Nh, 29X19X13.85Mm; Core Type:Toroid; Core Size:29Mm X 19Mm X 13.85Mm; Core Material Grade:75; For Use With:Broadband And Pulse Transformer; Effective Magnetic Path Length:73.2Mm; Inductance Factor Al:1.188Nh |Fair-Rite 2675801202 RoHS : Not Compliant |
| 212 | ||
| 2675801202 | Fair-Rite Products Corp | Suppression Core, 1.188Nh, 29X19X13.85Mm; |Fair-Rite 2675801202 RoHS : Not Compliant |
| 211 | ||
| 2675800202 | Fair-Rite Products Corp | Transfrmr Core, 75, 9.5Mm X 4.75Mm X 3.3Mm; |Fair-Rite 2675800202 RoHS : Compliant |
| 157 | ||
| 2675805302 | Fair-Rite Products Corp | Suppression Core, 1.3099Nh/35.55X23X15Mm; Core Type:Toroid; Core Size:35.55Mm X 23Mm X 15Mm; Core Material Grade:75; For Use With:Broadband And Pulse Transformer; Effective Magnetic Path Length:89.1Mm; Inductance Factor Al:1.3099Nh Rohs Compliant: Yes RoHS : Compliant |
| 147 | ||
| 2675805302 | Fair-Rite Products Corp | Suppression Core, 1.3099Nh/35.55X23X15Mm; |Fair-Rite 2675805302 RoHS : Compliant |
| 125 | ||
| 1375800-4 | TE Connectivity | Board-Board Connector Receptacle 120Way, 4Row; Connector Systems:Board-To-Board; Pitch Spacing:2Mm; No. Of Rows:4Rows; No. Of Contacts:120Contacts; Connector Mounting:Through Hole Mount; Product Range:-; Gender:Receptacle Rohs Compliant: Yes RoHS : Compliant |
| 111 | ||
| FMAT7580-20 | Fairview Microwave Inc | Rf Attenuator, N Male-N Female, 20Db; |Fairview Microwave FMAT7580-20 RoHS : Not Compliant |
| 2 | ||
| 7580 | Legrand North America LLC | R Dup 15A 125V 10A 250V T/L; |Legrand Pass & Seymour 7580 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX17580ATC+T | Analog Devices Inc | 4.5V to 60V, 1A High-Efficienc RoHS : Compliant |
| 5,000 | |
| MAX17580ATC+ | Analog Devices Inc | 4.5V to 60V, 1A High-Efficienc RoHS : Compliant |
| 124 | ||
| MAX17580EVKIT# | Analog Devices Inc | EVKIT for MAX17580. |
| 7 | ||
AD7580AQ![]() | Analog Devices Inc | CMOS-CONVERTER IC RoHS : Not Compliant | 0 | |||
![]() RS | 87758-0216 | Molex | MILLI-GRID SER, SER NUMBER 87758 2WAY 2 ROW STRAIGHT PCB HEADER, SOLDER TERM,2A RoHS : Compliant |
| 100 | |
| 7758056 | RS Pro | INDOOR PLUG SOCKET 1 GANGS TYPE G - BRITISH 13 A 230 V AC WHITE |
| 51 | ||
| P758-006 | Tripp Lite | USB CABLE KIT FOR KVM SWITCH B006-004-R- 6 RoHS : Compliant |
| 49 | ||
| 79758-0011 | Molex | PRE-CRIMPED LEAD SL FEMALE-TO-SL FEMALE, 300MM, 22 AWG |
| 28 | ||
| 7758068 | RS Pro | INDOOR PLUG SOCKET 2 GANGS TYPE G - BRITISH 13 A 230 V AC WHITE |
| 18 | ||
| 7758090 | RS Pro | WHITE 10 PLATE SWITCH RKR WALL 7MM 2 WAY 1 GANG BS STD 250 V 86MM NOT ILLUM IP20 |
| 18 | ||
| MPDB67580 | Mersen Electrical Power | POWER DISTRIBUTION BLOCK, OPEN STYLE, ALUMINUM, BOX-BOX, ADDER,1000VAC/DC,175A |
| 11 | ||
| SME312DQDP-75806 (75806) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 380MM, 10-30VDC, NPN/PNP, QD, MINI-BEAM |
| 7 | ||
| 7675803 | RS Pro | DIE CAST ZINC 40 FOOT PLATE CONNECTOR BRACKET & JOINT 0.3" M10 M8 THREAD |
| 2 | ||
| 7675806 | RS Pro | DIE CAST ZINC 40 FOOT PLATE CONNECTOR BRACKET & JOINT 0.3" M12 M8 THREAD |
| 2 | ||
| 4000-75800-1715032 | Murrelektronik GmbH | LED MACHINE LAMP, IP54, 24VDC, M8 CONNECTION, 32W, MODLIGHT ILLUMIX SLIM LINE |
| 2 | ||
| 8275808 | RS Pro | THERMOCOUPLE WIRE TYPE JX 164 FT (50M) FIBERGLASS 7/0.2 (0.219MM2) |
| 1 | ||
| 4000-75801-1415018 | Murrelektronik GmbH | MODLIGHT ILLUMIX CLASSIC LINE 18W, LED MACHINE LAMP, IP67, 24VDC, M12 CONNECTIO RoHS : Compliant |
| 1 | ||
| 7580 | Arrow Hart | RECP DUPLEX 15/10A 125/250V 3P3W H/L BK |
| 0 | ||
| 7580 | Pass & Seymour | 15A 125V 10A 250V NON-NEMA LOCKING DUPLEX RECEPTACLE |
| 0 | ||
![]() Microchip Technology Inc | 2N7580T1 | Microchip Technology Inc | Power Mosfet_T1, Projected EOL: - Contact for Pricing | 0 | ||
| 090-02758-000 | Microchip Technology Inc | TIMESOURCE TIME-OF-DAY (TOD) DISTRIBUTION PANEL, Projected EOL: 2051-01-13 - Contact for Pricing RoHS : Compliant | 0 | |||
| VV-800-EAE-SAAN-74M1758000 | Microchip Technology Inc | VCXO, 5.0x3.2mm, +3.3V, -40-85C, +/-100ppm, 74.1758MHz, LDFN, Projected EOL: 2051-04-02 RoHS : Compliant |
| 0 | ||
| OX-3051-BEE-2075-80M0000000 | Microchip Technology Inc | OX-3051-BEE-2075-80M0000000, Projected EOL: 2051-06-29 - Contact for Pricing | 0 | |||
| EX-4210-EAE-7580-52M0000000 | Microchip Technology Inc | EX-4210-EAE-7580-52M0000000, Projected EOL: 2049-11-17 - Contact for Pricing | 0 | |||
| EX-4211-EAE-7580-100M000000 | Microchip Technology Inc | EX-4211-EAE-7580-100M000000, Projected EOL: 2049-11-17 - Contact for Pricing | 0 | |||
| EX-4211-DAE-7580-10M0000000 | Microchip Technology Inc | EX-4211-DAE-7580-10M0000000, Projected EOL: 2051-03-13 - Contact for Pricing | 0 | |||
| EX-4210-EAE-7580-100M000000 | Microchip Technology Inc | EX-4210-EAE-7580-100M000000, Projected EOL: 2049-11-17 - Contact for Pricing | 0 | |||
| VV-800-EAE-SAAN-74M1758000TR | Microchip Technology Inc | VCXO, 5.0x3.2mm, +3.3V, -40-85C, +/-100ppm, 74.1758MHz, LDFN, Projected EOL: 2051-04-02 RoHS : Compliant |
| 0 | ||
| VV-800-EAE-SAAN-74M1758000_SNPB | Microchip Technology Inc | VCXO, 5.0x3.2mm, +3.3V, -40-85C, +/-100ppm, 74.1758MHz, LDFN, Projected EOL: 2051-04-02 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | IRF7580MTRPBF | Infineon Technologies AG | Power Field-Effect Transistor, 114A I(D), 60V, 0.0036ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant |
| 741 | |
AD7580KN![]() | Analog Devices Inc | ADC, Successive Approximation, 10-Bit, 1 Func, 2 Channel, Parallel, 8 Bits Access, CMOS, PDIP24 RoHS : Not Compliant |
| 293 | ||
AD7580JNZ![]() | Analog Devices Inc | ADC, Successive Approximation, 10-Bit, 1 Func, 2 Channel, Parallel, 8 Bits Access, CMOS, PDIP24 RoHS : Compliant |
| 333 | ||
AD7580JP![]() | Analog Devices Inc | LC2MOS 10-Bit Sampling ADC RoHS : Not Compliant |
| 1,511 | ||
AD7580JPZ![]() | Analog Devices Inc | LC2MOS 10-Bit Sampling ADC RoHS : Compliant |
| 153 | ||
AD7580SE![]() | Analog Devices Inc | ADC, Successive Approximation, 10-Bit, 1 Func, 2 Channel, Parallel, 8 Bits Access, CMOS, CQCC28 RoHS : Not Compliant |
| 1,031 | ||
AD7580KNZ![]() | Analog Devices Inc | ADC, Successive Approximation, 10-Bit, 1 Func, 2 Channel, Parallel, 8 Bits Access, CMOS, PDIP24 RoHS : Compliant |
| 420 | ||
TPS75801KTTR![]() | Texas Instruments | IC VOLT REG Adjustable 1 REG 1.225V 3A TO-263-6 T/R RoHS : Compliant |
| 1 | ||
TPS75801KTTT![]() | Texas Instruments | Adjustable Positive LDO Regulator, 1.22V Min, 5V Max, 0.3V Dropout, PMOS, PSSO5 RoHS : Compliant |
| 21 | ||
5962-8775801RA![]() | Texas Instruments | 54AC245 - Bus Transceiver, 8-Bit, Bidirectional, with 3-State Inputs/Outputs RoHS : Not Compliant |
| 116 | ||
71T75802S100PF![]() | Integrated Device Technology Inc | ZBT SRAM, 1MX18, 5ns, CMOS, PQFP100 RoHS : Not Compliant |
| 19 | ||
71T75802S100PFG![]() | Integrated Device Technology Inc | ZBT SRAM, 1MX18, 5ns, CMOS, PQFP100 RoHS : Compliant |
| 882 | ||
71T75802S133PFI![]() | Integrated Device Technology Inc | ZBT SRAM, 1MX18, 4.2ns, CMOS, PQFP100 RoHS : Not Compliant |
| 25 | ||
71T75802S200BGG![]() | Integrated Device Technology Inc | 1M X 18, 2.5V Synchronous ZBT SRAM 2.5V I/O, Burst Counter Pipelined Output RoHS : Compliant |
| 30 | ||
| IRF7580MTRPBF | International Rectifier | Power Field-Effect Transistor, 114A I(D), 60V, 0.0036ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant |
| 7,423 | ||
![]() Sager | 0877580416 | Molex | Headers & Wire Housings 2.00MM HDR 02X02P VT TH 15AU RoHS : Compliant |
| 0 | |
| 2-747580-1 | TE Connectivity | D-Sub Tools & Hardware DSUB ACC: FERRULE RoHS : Compliant |
| 0 | ||
| 203-1-7580-1 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 1107580 | Phoenix Contact | Phoenix Contact D-PT 4/S-QUATTRO/1P |
| 0 | ||
| 758077-000 | TE Connectivity | Hook-up Wire 55A1832-24-MST3-9CS2275 RoHS : Compliant |
| 0 | ||
| AAA7758-00 | TE Connectivity | TE Connectivity 91A3-10-13-1-B-HE300 RoHS : Not Compliant | 0 | |||
| 82375-8012 | OMRON Electronic Components | DIP Switches / SIP Switches SCS2525SP0030801505000SPA | 0 | |||
| 9758002031 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758002068 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758002112 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758002149 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758003003 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758003085 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758004020 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758004057 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() Ameya Holding Limited | TLV75801PDBVT![]() | Texas Instruments | RoHS : Compliant | 263 | ||
![]() ComSIT USA | FDMS7580 | Fairchild Semiconductor Corporation | N-CHANNEL POWER TRENCH MOSFET Power Field-Effect Transistor, 15A I(D), 25V, 0.0075ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 6,000 | ||
| 99616LM2CL7580SG6TR8TEU | Everlight Electronics Co Ltd | Single Color LED, Pure White, Water Clear RoHS : Not Compliant | 2,000 | |||
| ST7580 | STMicroelectronics | Telecom Circuit, 1-Func, CMOS, PQCC48 RoHS : Compliant | 260 | |||
TLV75801PDBVT![]() | Texas Instruments | Adjustable Positive LDO Regulator, 0.55V Min, 5.5V Max, 0.88V Dropout, PDSO5 RoHS : Compliant | 115 | |||
| MKP1847580354P2 | Vishay Intertechnologies | Film Capacitor, Polypropylene, 700V, 5% +Tol, 5% -Tol, 8uF, Through Hole Mount RoHS : Compliant | 86 | |||
| MKP1847580354P4 | Vishay Intertechnologies | METALLIZED POLYPROPYLENE FILM CAPACITOR Film Capacitor, Polypropylene, 700V, 5% +Tol, 5% -Tol, 8uF, Through Hole Mount RoHS : Compliant | 27 | |||
AD7580KN![]() | Analog Devices Inc | LC2MOS 10-BIT SAMPLING A/D CONVERTER ADC, Successive Approximation, 10-Bit, 1 Func, 2 Channel, Parallel, 8 Bits Access, CMOS, PDIP24 RoHS : Not Compliant | 11 | |||
![]() Interstate Connecting Components | 2-747580-1 | TE Connectivity | SHLDING FERRULEPLTD TINBULK RoHS : Compliant |
| 274 | |
| 6367580-2 | TE Connectivity | ASSY Z-DOK+4 HOST BOARD 16PR RoHS : Compliant |
| 0 | ||
| MR7580-15PBSU-MC298 | Glenair Inc | MICRO-D VERTICAL MOUNT PRINTED CIRCUIT BOARD | 0 | |||
| MR7580-9S1ASU | Glenair Inc | MICRO-D VERTICAL MOUNT PRINTED CIRCUIT BOARD |
| 0 | ||
| GMR7580-100S2BRN-1245 | Glenair Inc | 0 | ||||
| GMR7580-15P2ARN | Glenair Inc | RoHS : Not Compliant | 0 | |||
| GMR7580-25S5BSM-513 | Glenair Inc | CONNECTOR RoHS : Compliant | 0 | |||
| GMR7580C-100S1BM | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 5-2176758-0 | TE Connectivity | RT 1J 0.2W 348R 0.1% 25PPM 5K RoHS : Unknown | 0 | |||
| VM1175800000G | Amphenol Anytek | VM-5.0-11P GREY WO FLANGE - Z | 0 | |||
| 901758-000 | TE Connectivity | TWJS-54/23-1200/U | 0 | |||
| 1375800-4 | TE Connectivity | ASSY,120 POS PC104 PLUS LF RoHS : Compliant |
| 0 | ||
| CP0758-000 | TE Connectivity | IXSU-F5121-FI01 | 0 | |||
| GMR7580-15S5BSM-513 | Glenair Inc | CONNECTOR RoHS : Compliant | 0 | |||
| GMR7580-25S-5BSM-513 | Glenair Inc | PCB CONN 25S 0.075 PITCH (MRM8553) | 0 | |||
![]() PEI Genesis | 85997580 | SOURIAU-SUNBANK |
| 89 | ||
| MM67075800003 | Amphenol PCD |
| 0 | |||
| MM67075800021 | Amphenol PCD |
| 0 | |||
| MM67075800027 | Amphenol PCD |
| 0 | |||
| MM67075800011 | Amphenol PCD |
| 0 | |||
| 075-8005-022 | ITT Interconnect Solutions |
| 0 | |||
| MM67075800025 | Amphenol PCD |
| 0 | |||
| 075-8010-122 | ITT Interconnect Solutions |
| 0 | |||
| 10-242758-008 | Amphenol Corporation |
| 0 | |||
| MM67075800041 | Amphenol PCD |
| 0 | |||
| MM67075800035 | Amphenol PCD |
| 0 | |||
| 217-0758-011 | ITT Interconnect Solutions |
| 0 | |||
| MM67075800005 | Amphenol PCD |
| 0 | |||
| MM67075800031 | Amphenol PCD |
| 0 | |||
| 10-242758-016 | Amphenol Corporation |
| 0 | |||
![]() Chip 1 Exchange | 1-5380758-0 | TE Connectivity | INSTOCK RoHS : Compliant | 75,973 | ||
| 87758-0216 | Molex | INSTOCK RoHS : Compliant | 39,000 | |||
| 79758-0005 | Molex | INSTOCK | 24,384 | |||
| E44758-000 | TE Connectivity | INSTOCK RoHS : Compliant | 14,157 | |||
| 2-747580-1 | TE Connectivity | INSTOCK RoHS : Compliant | 10,129 | |||
| 1375801-1 | TE Connectivity | INSTOCK RoHS : Compliant | 7,311 | |||
| 6-1337580-0 | TE Connectivity | INSTOCK RoHS : Compliant | 4,076 | |||
| 78758-0001 | Molex | INSTOCK RoHS : Compliant | 2,600 | |||
TLV75801PDBVT![]() | Texas Instruments | INSTOCK RoHS : Compliant | 1,064 | |||
| 9410758021- | INSTOCK | 473 | ||||
| 860943271137580000E1 | Amphenol FCi | INSTOCK | 224 | |||
TLV75801PDRVR![]() | Texas Instruments | INSTOCK RoHS : Compliant | 131 | |||
| 077580/115 | CTC Coils Ltd | INSTOCK | 100 | |||
| 71T75802S200BGG | Renesas Electronics Corporation | INSTOCK RoHS : Compliant | 81 | |||
| 86094327113758000EI | Amphenol FCi | INSTOCK | 44 | |||
![]() Avnet Abacus | 877580816 | Molex | Pin Header Square Pin Signal 2 mm 2 Rows 8 Contacts Through Hole Straight MilliGrid 87758 (Alt: 877580816) RoHS : Compliant | 46,000 | ||
| 1758021 | Phoenix Contact | Terminal Block Header 508 mm 3 Ways 12 A 320 V Through Hole Vertical (Alt: 1758021) RoHS : Compliant | 750 | |||
| 1758018 | Phoenix Contact | Terminal Block Header 508 mm 2 Ways 12 A 320 V Through Hole Vertical (Alt: 1758018) RoHS : Compliant | 750 | |||
| 1758034 | Phoenix Contact | Terminal Block Header 508 mm 4 Ways 12 A 320 V Through Hole Vertical (Alt: 1758034) RoHS : Compliant | 500 | |||
| 1758047 | Phoenix Contact | Terminal Block Header 508 mm 5 Ways 12 A 320 V Through Hole Vertical (Alt: 1758047) RoHS : Compliant | 250 | |||
| 1758076 | Phoenix Contact | MSTBV 25 8G508 MSTBV258G508 (Alt: 1758076) RoHS : Compliant | 100 | |||
| 1758092 | Phoenix Contact | MSTBV 2510G508 MSTBV2510G508 (Alt: 1758092) RoHS : Compliant | 100 | |||
| 797580016 | Molex | PreCrimped Lead PicoSPOX FemaletoPicoSPOX Female 300mm 24 AWG (Alt: 797580016) RoHS : Compliant | 0 | |||
| 797580016 | Molex | PreCrimped Lead PicoSPOX FemaletoPicoSPOX Female 300mm 24 AWG (Alt: 797580016) RoHS : Compliant | 0 | |||
| 877580817 | Molex | Conn Unshrouded Header HDR 8 POS 2mm Solder ST ThruHole Tray (Alt: 877580817) RoHS : Compliant | 0 | |||
| 2-747580-1 | TE Connectivity | Cable Accessories Ferrule Steel Tin Over Copper (Alt: 2-747580-1) RoHS : Compliant | 0 | |||
| 2-747580-1 | TE Connectivity | Cable Accessories Ferrule Steel Tin Over Copper (Alt: 2-747580-1) RoHS : Compliant | 0 | |||
| 758077-000 | TE Connectivity | AMP758077000 (Alt: 758077-000) RoHS : Compliant | 0 | |||
| 4-1437580-0 | TE Connectivity | Switch Slide SP4T Extended Side Slide 20VAC 20VDC 04VA PC Pins Bracket MountThrough Hole (Alt: 4-1437580-0) RoHS : Compliant | 0 | |||
| 5-1617580-1 | TE Connectivity | (Alt: 5-1617580-1) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | 8-175807-01 | Amphenol Corporation | ANTENNA ASSEMBLY (Alt: 8-175807-01) RoHS : Compliant | 0 | ||
| 10143475-806A000LF | Amphenol Corporation | (Alt: 10143475-806A000LF) RoHS : Compliant | 0 | |||
| 10143475-804A000LF | Amphenol Corporation | (Alt: 10143475-804A000LF) RoHS : Compliant | 0 | |||
| HPL758040FR33MRD3P | TDK Corporation | (Alt: HPL758040FR33MRD3P) RoHS : Compliant | 0 | |||
| B39262B7580L210 | Qualcomm RFFE Filter Products | B43703A4159M603 (Alt: B39262B7580L210) RoHS : Compliant | 0 | |||
| ASP-243758-01 | Samtec Inc | TSW-110-08-F-D-SHEAR TAIL 3.4MM (Alt: ASP-243758-01) RoHS : Compliant | 0 | |||
| 758030001 | Amphenol Corporation | (Alt: 758030001) RoHS : Compliant | 0 | |||
| MKP1847580354P4 | Vishay Intertechnologies | (Alt: MKP1847580354P4) RoHS : Compliant | 0 | |||
| 10217758-00 | TE Connectivity | (Alt: 10217758-00) RoHS : Compliant | 0 | |||
| 0877580216 | Molex | Pin Header, 2 Contacts, 2 Rows, 2mm, Gold, 2A, Straight, Unshrouded, Phosphor Bronze, Board-to-Board (Alt: 0877580216) RoHS : Compliant | 0 | |||
| 0787580002 | Molex | I/O Connector, Plug, SAS / PCIe, 68 Contacts, Gold, PCB Mount, Copper Alloy, SMT RA, 78758 Series (Alt: 0787580002) RoHS : Compliant | 0 | |||
| 0877580616 | Molex | Pin Header, 6 Contacts, 2 Rows, 2mm, Gold, 2A, Straight, Unshrouded, Phosphor Bronze, Board-to-Board (Alt: 0877580616) RoHS : Compliant | 0 | |||
![]() Avnet Silica | ST7580 | STMicroelectronics | Power Line Networking SoC 48Pin VFQFPN EP Tray (Alt: ST7580) RoHS : Compliant | 0 | ||
| ST7580TR | STMicroelectronics | Power Line Networking Line DriverReceiver VFQFPN 48 Pin (Alt: ST7580TR) RoHS : Compliant | 0 | |||
| 71T75802S200PFG | Renesas Electronics Corporation | (Alt: 71T75802S200PFG) RoHS : Compliant | 0 | |||
| 71T75802S150PFG | Renesas Electronics Corporation | (Alt: 71T75802S150PFG) RoHS : Compliant | 0 | |||
| EVALKITST7580-1 | STMicroelectronics | ST7580 Power Line Networking System On Chip Demonstration Kit (Alt: EVALKITST7580-1) RoHS : Compliant | 0 | |||
| 71T75802S166PFGI | Renesas Electronics Corporation | (Alt: 71T75802S166PFGI) RoHS : Compliant | 0 | |||
| 71T75802S133PFGI | Renesas Electronics Corporation | (Alt: 71T75802S133PFGI) RoHS : Compliant | 0 | |||
| DTR0000175804 (ALS) | Sanmina Corporation | (Alt: DTR0000175804) RoHS : Not Compliant | 0 | |||
| DTR0000175802 (ALS) | Sanmina Corporation | (Alt: DTR0000175802) RoHS : Not Compliant | 0 | |||
| C17580_STRADA-2X2-SHD-WHT | LEDIL | Backlight Control Shade for STRADA Family 2x2 LEDs Polycarbonate White (Alt: C17580_STRADA-2X2-SHD-WHT) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 105-0758-001 | Johnson Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,535 | |
| 175-802 | Spaenaur | IN STOCK SHIP TODAY |
| 601 | ||
| 2-1437580-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 300 | ||
| 175-800 | Spaenaur | IN STOCK SHIP TODAY | 250 | |||
| 175-802 | SPANAUR | IN STOCK SHIP TODAY | 250 | |||
| 747580-8 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 122 | ||
| 2-747580-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 57 | ||
| 2-747580-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant | 37 | |||
| 5-1617580-1 | TE Connectivity | IN STOCK SHIP TODAY |
| 31 | ||
| 1758089 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 22 | ||
| VG-1201CA74.175800M-TBGC | Seiko Epson Corporation | IN STOCK SHIP TODAY |
| 10 | ||
| 42203758-03SE | Honeywell Sensing and Control | IN STOCK SHIP TODAY |
| 8 | ||
| 1758092 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| 7-5804 | International Rectifier | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | 85-17-580-20 | Southco | 0 | |||
| M2275-8012-SS-20 | RAF Electronic Hardware | 0 | ||||
| 7580-B-632-B-5 | RAF Electronic Hardware | 0 | ||||
| 7580-D-440-SS-20 | RAF Electronic Hardware | STAINLESS KNURLED FRONT 1/4 RND SWAGE STANDOFF | 0 | |||
| M2275-8012-SS | RAF Electronic Hardware | 0 | ||||
| D42758-01 | Shercon Inc | 0 | ||||
| 005758000002 | Essentra Components | 0 | ||||
| 005375800014 | Essentra Components | SPACER 3.4X6X25 NATURAL POLYSTYRENE | 0 | |||
| 3675800 | PennEngineering (PEM) | 0 | ||||
| 3675800 | SHEREX FASTENING SO | 0 | ||||
| 13RS037580B | Essentra Components | ROUND SPACER, .265 ID, .375 OD | 0 | |||
| 13RS037580 | Essentra Components | ROUND SPACER, .265 ID, .375 OD | 0 | |||
| S7580 | Heyco | 0 | ||||
| 497580 | Essentra Components | 0 | ||||
![]() EBV Elektronik | C17580_STRADA-2X2-SHD-WHT | LEDIL | Backlight Control Shade for STRADA Family 2x2 LEDs Polycarbonate White (Alt: C17580_STRADA-2X2-SHD-WHT) RoHS : Compliant | 4,460 | ||
| ST7580 | STMicroelectronics | Power Line Networking SoC 48Pin VFQFPN EP Tray (Alt: ST7580) RoHS : Compliant | 0 | |||
| ST7580TR | STMicroelectronics | Power Line Networking Line DriverReceiver VFQFPN 48 Pin (Alt: ST7580TR) RoHS : Compliant | 0 | |||
| NJU77580F-TE1 | Nisshinbo Micro Devices | NJU77580F (Alt: NJU77580F-TE1) RoHS : Compliant | 0 | |||
| 99-616LM2C/L7580SG6/TR8-T/EU | Everlight Electronics Co Ltd | (Alt: S10C012916) RoHS : Compliant | 0 | |||
![]() Flip Electronics | FDMS7580 | onsemi | Stock, Ship Today RoHS : Compliant |
| 779,540 | |
| LC75805PES-3H | onsemi | Stock, Ship Today RoHS : Compliant | 702 | |||
| LC75808WS-E | onsemi | Stock, Ship Today RoHS : Compliant |
| 600 | ||
![]() Master Electronics | 2-747580-1 | TE Connectivity | SHLDING FERRULE PLTD TIN BULK RoHS : Compliant |
| 2,198 | |
| 84057580 | HUBER+SUHNER | Coaxial Connector - BNC - 50 Ohm - Straight cable plug (male) RoHS : Compliant |
| 110 | ||
| 0877580416 | Molex | Conn Unshrouded Header HDR 4 POS 2mm Solder ST Thru-Hole Milli-Grid™ Tray RoHS : Compliant |
| 0 | ||
| 2847580000 | Weidmüller Interface GmbH & Co. KG | AL4C 2.5 FE RoHS : Compliant |
| 0 | ||
| 1107580 | Phoenix Contact | D-PT 4/S-QUATTRO/1P RoHS : Compliant |
| 0 | ||
| 758077-000 | TE Connectivity | 55A1832-24-MST3-9CS2275 MOQ Reduction RoHS : Compliant |
| 0 | ||
| C995-8758-002 | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| 5-1617580-1 | TE Connectivity | 3SBH1067A2=RELAY MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 6367580-2 | TE Connectivity | ASSY Z-DOK+4 HOST BOARD 16PR RoHS : Compliant |
| 0 | ||
| 805758-000 | TE Connectivity | STD17W-7 RoHS : Compliant |
| 0 | ||
| FFSD-20-D-97.58-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFSD-25-D-75.80-01-N | Samtec Inc | This flat Tiger Eye™ IDC socket cable system features an exceptionally low profile design with a multi-finger BeCu contact system for high reliability and high cycle applications. Optional rugged strain relief is available for a more robust connection in RoHS : Compliant |
| 0 | ||
| 75758-0101 | Molex | Conn I-Pass RCP 52 POS 0.8mm Press Fit RA Thru-Hole 52 Terminal 1 Port iPass Tray RoHS : Compliant |
| 0 | ||
| 5-2176758-0 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 1627580 | Phoenix Contact | KC-0301TE2S1004 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W17580-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to N Female 4 Hole Flange Cable 6 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly SMA male to N female 4 hole flange cable 6 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N female 4 hole flange cable 6 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N 4 hole flange cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W17580-6 can also be known as a SMA plug to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17580-6 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to 4 hole flange type N female cable has a maximum VSWR of 1.4:1. SMA plug to type N jack cable assembly PE3W17580-6 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17580-6 can also be used in the other direction and will be a type N female 4 hole flange to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements. |
| 235 | |
| PE3W17580-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Female 4 Hole Flange Cable 12 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly SMA male to N female 4 hole flange cable 12 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N female 4 hole flange cable 12 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N 4 hole flange cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W17580-12 can also be known as a SMA plug to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17580-12 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to 4 hole flange type N female cable has a maximum VSWR of 1.4:1. SMA plug to type N jack cable assembly PE3W17580-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17580-12 can also be used in the other direction and will be a type N female 4 hole flange to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements. |
| 235 | ||
| PE3W17580-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to N Female 4 Hole Flange Cable 18 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly SMA male to N female 4 hole flange cable 18 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N female 4 hole flange cable 18 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N 4 hole flange cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W17580-18 can also be known as a SMA plug to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17580-18 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to 4 hole flange type N female cable has a maximum VSWR of 1.4:1. SMA plug to type N jack cable assembly PE3W17580-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17580-18 can also be used in the other direction and will be a type N female 4 hole flange to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements. |
| 185 | ||
| PE7580-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 1.2 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-40 is a 40 dB fixed attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-40 fixed attenuator is available with a typical attenuation accuracy of 1.2 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 40 dB. The Pasternack PE7580-40 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 40 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-40 will ship the same business day as purchased from Pasternack’s production facility. This 40 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 5 | ||
| PE7580-50 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 50 dB, Attenuation Accuracy, Typ: 1.2 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 50 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-50 is a 50 dB fixed attenuator from Pasternack. This 50 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-50 fixed attenuator is available with a typical attenuation accuracy of 1.2 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 50 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 50 dB. The Pasternack PE7580-50 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 50 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-50 will ship the same business day as purchased from Pasternack’s production facility. This 50 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7580-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 0.7 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-3 is a 3 dB fixed attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-3 fixed attenuator is available with a typical attenuation accuracy of 0.7 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7580-3 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 3 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-3 will ship the same business day as purchased from Pasternack’s production facility. This 3 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7580-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.8 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-10 fixed attenuator is available with a typical attenuation accuracy of 0.8 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7580-10 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 10 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE3W07580 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Female to BNC Female Bulkhead Cable Using RG174 Coax. PE3W07580 is a BNC female to BNC female bulkhead cable using RG174 coax. This Pasternack BNC female to BNC female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07580 BNC female to BNC female bulkhead cable assembly is constructed with RG174 coax. | 0 | |||
| PE37580-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to TNC Male Cable 36 Inch Length Using RG141 Coax., Radio frequency assembly SMA male to TNC male cable 36 inch length using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable 36 inch length using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE37580-36, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE37580-36 is built with RG141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37580-36 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable 36 inch length using RG141 coax. |
| 0 | ||
| PE37580LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Cable Using RG141 Coax with HeatShrink, LF Solder. PE37580LF/HS is a SMA male to TNC male cable using RG141 coax. This Pasternack SMA male to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37580LF/HS SMA male to TNC male cable assembly is constructed with RG141 coax. | 0 | |||
| PE37580-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to TNC Male Cable 12 Inch Length Using RG141 Coax., Radio frequency assembly SMA male to TNC male cable 12 inch length using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable 12 inch length using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE37580-12, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE37580-12 is built with RG141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37580-12 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable 12 inch length using RG141 coax. |
| 0 | ||
| PE7580-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 0.8 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-20 is a 20 dB fixed attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-20 fixed attenuator is available with a typical attenuation accuracy of 0.8 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 20 dB. The Pasternack PE7580-20 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 20 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-20 will ship the same business day as purchased from Pasternack’s production facility. This 20 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE37580LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Cable Using RG141 Coax, LF Solder. PE37580LF is a SMA male to TNC male cable using RG141 coax. This Pasternack SMA male to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37580LF SMA male to TNC male cable assembly is constructed with RG141 coax. | 0 | |||
| PE3W17580LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. N Female 4 Hole Flange to SMA Male Cable Using PE-SR402FLJ Coax with HeatShrink, LF Solder. PE3W17580LF/HS is a N female 4 hole flange to SMA male cable using PE-SR402FLJ coax. This Pasternack N female 4 hole flange to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N 4 hole flange to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W17580LF/HS N female 4 hole flange to SMA male cable assembly is constructed with PE-SR402FLJ coax. | 0 | |||
| PE37580/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Cable Using RG141 Coax with HeatShrink. PE37580/HS is a SMA male to TNC male cable using RG141 coax. This Pasternack SMA male to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37580/HS SMA male to TNC male cable assembly is constructed with RG141 coax. | 0 | |||
![]() Teledyne HiRel | 5962-9758001QFA![]() | Teledyne HiRel | FLIP-FLOP, JK, DUAL RoHS : Not Compliant | 0 | ||
| 5962-8775801SA | Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-8775801RA | Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS RoHS : Not Compliant | 0 | |||
5962-9758001Q2A![]() | Teledyne HiRel | FLIP-FLOP, JK, DUAL RoHS : Not Compliant | 0 | |||
| M38510/75802B2A | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | |||
| M38510/75802BFA | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | |||
| 5962-8775801ZA | Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS RoHS : Not Compliant | 0 | |||
| M38510/75803BFA | Teledyne HiRel | DECODER, DUAL 2-TO-4-LINE RoHS : Not Compliant | 0 | |||
| M38510/75802BEA | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | |||
5962-9758001QEA![]() | Teledyne HiRel | FLIP-FLOP, JK, DUAL RoHS : Not Compliant | 0 | |||
| M38510/75803B2A | Teledyne HiRel | DECODER, DUAL 2-TO-4-LINE RoHS : Not Compliant | 0 | |||
| M38510/75803BEA | Teledyne HiRel | DECODER, DUAL 2-TO-4-LINE RoHS : Not Compliant | 0 | |||
| 5962-87758012A | Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS RoHS : Not Compliant | 0 | |||
![]() Vyrian | 1927580 | Phoenix Contact | Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 11,578 | ||
| 1375800-4 | TE Connectivity | Board Connector, 120 Contact(s), 4 Row(s), Female, Straight, Press Fit Terminal, Black Insulator RoHS : Compliant | 10,960 | |||
| AN7580 | Panasonic Electronic Components | Telecom Circuit, 1-Func, Bipolar, PSIP12 | 10,290 | |||
| 5962-88758012A | Texas Instruments | 9,138 | ||||
5962-9675801NYB![]() | Texas Instruments | Palette DAC, 1600 X 1280 Pixels, CMOS, PQFP160 RoHS : Not Compliant | 8,920 | |||
TPS75801KTTR![]() | Texas Instruments | Adjustable Positive LDO Regulator, 1.22V Min, 5V Max, 0.3V Dropout, PMOS, PSSO5 RoHS : Compliant | 8,871 | |||
AD7580KN![]() | Analog Devices Inc | ADC, Successive Approximation, 10-Bit, 1 Func, 2 Channel, Parallel, 8 Bits Access, CMOS, PDIP24 RoHS : Not Compliant | 8,848 | |||
| 5962F8775802V9A | STMicroelectronics | 7,954 | ||||
| LC75809PTS-H | onsemi | Liquid Crystal Driver, 352-Segment, CMOS, PQFP100 RoHS : Compliant | 7,513 | |||
AD7580JNZ![]() | Analog Devices Inc | ADC, Successive Approximation, 10-Bit, 1 Func, 2 Channel, Parallel, 8 Bits Access, CMOS, PDIP24 RoHS : Compliant | 7,441 | |||
5962F8775802VRA![]() | STMicroelectronics | 5,781 | ||||
| 5962-8875801CX | Texas Instruments | 5,096 | ||||
5962-9758001QFA![]() | Texas Instruments | J-Kbar Flip-Flop, F/FAST Series, 2-Func, Positive Edge Triggered, 2-Bit, Complementary Output, TTL, CDFP16 RoHS : Not Compliant | 4,777 | |||
5962-8775801VSA![]() | Texas Instruments | Bus Transceiver, AC Series, 1-Func, 8-Bit, True Output, CMOS, CDFP20 RoHS : Not Compliant | 4,611 | |||
| BCM87580A0KFEBG | Broadcom Limited | 4,020 | ||||
![]() Win Source Electronics | TLV75801PDBVR![]() | Texas Instruments | IC REG LIN POS ADJ 500MA SOT23-5 RoHS : Compliant |
| 990,000 | |
TLV75801PDRVT![]() | Texas Instruments | IC REG LIN POS ADJ 500MA 6WSON RoHS : Compliant |
| 68,440 | ||
TLV75801PDRVR![]() | Texas Instruments | IC REG LIN POS ADJ 500MA 6WSON / Linear Voltage Regulator IC Positive Adjustable 1 Output 500mA 6-WSON (2x2) RoHS : Compliant |
| 65,360 | ||
TLV75801PDBVT![]() | Texas Instruments | IC REG LIN POS ADJ 500MA SOT23-5 / Linear Voltage Regulator IC Positive Adjustable 1 Output 500mA SOT-23-5 RoHS : Compliant |
| 54,360 | ||
| FM17580-QNA-T-G | Shanghai Fudan Microelectronics Group Co Limited |
| 30,000 | |||
| ST7580 | STMicroelectronics | IC TELECOM INTERFACE 48VFQFPN RoHS : Compliant |
| 20,000 | ||
| ST7580TR | STMicroelectronics | IC TXRX S-FSK PWR LINE 48VFQFPN RoHS : Compliant |
| 18,500 | ||
| 1758021 | Phoenix Contact | TERM BLOCK HDR 3POS VERT 5.08MM RoHS : Compliant |
| 10,000 | ||
| 78758-0002 | Molex | I/O Connectors SAS/PCIe Plug RA SMT 68Ckt RoHS : Compliant |
| 4,000 | ||
TPS75801KTTR![]() | Texas Instruments | IC REG LDO ADJ 3A DDPAK RoHS : Compliant |
| 2,950 | ||
TPS75801KTTRG3![]() | Texas Instruments | IC REG LDO ADJ 3A DDPAK RoHS : Compliant |
| 2,670 | ||
| 1758034 | Phoenix Contact | TERM BLOCK HDR 4POS VERT 5.08MM / 4 Position Terminal Block Header, Male Pins, Shrouded (2 Side) 0.200" (5.08mm) Vertical Through Hole RoHS : Compliant |
| 490 | ||
| 1758018 | Phoenix Contact | TERM BLOCK HDR 2POS VERT 5.08MM RoHS : Compliant |
| 354 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |