| データシートサーチシステム |
|
7612-S08-R 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() Avnet Americas | ECS-.327-6-12-TR | ECS International Inc | Crystal, 32.768 kHz, SMD, 2mm x 1.2mm, 6 pF, 20 ppm, ECX-12 Series - Tape and Reel (Alt: ECS-.327-6-12-TR) RoHS : Compliant |
| 39,000 | |
| ECS-.327-6-1210B-N-TR | ECS International Inc | Crystal, Tuning Fork, 32.768 kHz, SMD, 1.2mm x 1mm x 0.35mm, 6 pF, 20 ppm, ECX-1210B - Tape and Reel (Alt: ECS-.327-6-1210B-N-TR) RoHS : Compliant |
| 15,000 | ||
| ECS-.327-6-12RR-TR | ECS International Inc | - Tape and Reel (Alt: ECS-.327-6-12RR-TR) RoHS : Compliant |
| 6,000 | ||
| 501876-1240 | Molex | Pin Header, 12 Contacts, 2 Rows, 2mm, Matte Tin, 2A, Right Angle, Shrouded, Brass, Wire-to-Board - Trays (Alt: 5018761240) RoHS : Compliant |
| 4,540 | ||
| 00761200 | Toradex Inc | 00761200VERDINAM62QGBWBIT - Trays (Alt: 00761200) RoHS : Compliant |
| 10 | ||
| 214761-2105 | Molex | Cable, UL 10002, Receptacle, Micro-Fit 3.0 to Micro-Fit 3.0, 22 AWG, 450mm L, Tin, Red, Crimp - Bulk (Alt: 77AH5574) RoHS : Not Compliant |
| 0 | ||
| 214761-2105 | Molex | Cable, UL 10002, Receptacle, Micro-Fit 3.0 to Micro-Fit 3.0, 22 AWG, 450mm L, Tin, Red, Crimp - Bulk (Alt: 2147612105) RoHS : Compliant |
| 0 | ||
| 2076120-1 | TE Connectivity | Wire Anvil for Ocean Feed Applicator - Bag (Alt: 2076120-1) RoHS : Not Compliant | 0 | |||
| 9457612500 | Weidmüller Interface GmbH & Co. KG | SAIL-M12G-5-25U - Bulk (Alt: 9457612500) RoHS : Not Compliant |
| 0 | ||
| 62GB-776-12(416) | Amphenol Corporation | - Bulk (Alt: 62GB77612416) RoHS : Not Compliant |
| 0 | ||
| DBAS 76-12-0 PN | TE Connectivity | - Bag (Alt: ZPF000000000013171) RoHS : Compliant |
| 0 | ||
| 89761-2360 | Molex | CABLE ASSY MMCX JACK/U.FL (IPEX)1.37MM - Bulk (Alt: 0897612360) RoHS : Compliant |
| 0 | ||
| 7-2266761-2 | TE Connectivity | Ocean Feed Applicator Pneumatic Male Adapter Post - Atlantic Style Capability Study/Crimped Sample/Cross Section - Photograph Service Option 30mm Stroke Terminator 40mm Stroke Terminator - Bulk (Alt: 7-2266761-2) RoHS : Not Compliant | 0 | |||
| ECS-.327-6-1210-TR | ECS International Inc | Crystal 32.768KHz 6pF 2-Pin SMD 1210 T/R - Tape and Reel (Alt: ECS-.327-6-1210-TR) RoHS : Compliant |
| 0 | ||
| ICL7612DCBAZ-T | Renesas Electronics Corporation | - Tape and Reel (Alt: ICL7612DCBAZ-T) RoHS : Compliant | 0 | |||
![]() Newark | 744761210A | Wurth Elektronik | Inductor, 100Nh, 0.4A, 0603; |Würth Elektronik 744761210A RoHS : Compliant |
| 2,395 | |
| 744761210A | Wurth Elektronik | Inductor, 100Nh, 0.4A, 0603; |Würth Elektronik 744761210A RoHS : Compliant |
| 2,395 | ||
| 76-1205 | MCM Electronics / Tenma | Crocodile Clip W/4Mm Socket, 12Mm, 15A; |Tenma 76-1205 RoHS : Compliant |
| 1,775 | ||
| FMC00276-12 | Fairview Microwave Inc | Low Loss Sma Male-Ra Push-On Smp Fem Cbl; |Fairview Microwave FMC00276-12 RoHS : Not Compliant |
| 1,025 | ||
| FMC00076-12 | Fairview Microwave Inc | Low Loss Bnc Male-Bnc Male Cbl Coax; |Fairview Microwave FMC00076-12 RoHS : Not Compliant |
| 587 | ||
| FMCA2776-12 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 12", 305Mm, Rg223; |Fairview Microwave FMCA2776-12 RoHS : Compliant |
| 313 | ||
| ZW-05-19-T-S-1076-127 | Samtec Inc | Conn Stack Brd, 2.54Mm, 5Pos, Hdr; |Samtec, Inc. ZW-05-19-T-S-1076-127 RoHS : Compliant |
| 269 | ||
| ICL7612DCBAZ-T | Renesas Electronics Corporation | Op-Amp, 1.4Mhz, 1.6V/Us, Soic-8; |Renesas Electronics Corporation ICL7612DCBAZ-T RoHS : Compliant |
| 204 | ||
| ICL7612DCBAZ-T | Renesas Electronics Corporation | Op-Amp, 1.4Mhz, 1.6V/Us, Soic-8; |Renesas Electronics Corporation ICL7612DCBAZ-T RoHS : Compliant |
| 204 | ||
| LAT-176-124 | Brady Worldwide Inc | Label, Identification, Laser Printable; |Brady LAT-176-124 RoHS : Not Compliant |
| 190 | ||
| Y4076120K000B9R | VPG Foil Resistors | Res, 120K, 0.1%, 0.75W, 2512; |Vpg Foil Resistors Y4076120K000B9R RoHS : Compliant |
| 75 | ||
| Y4076120K000B9R | VPG Foil Resistors | Res, 120K, 0.1%, 0.75W, 2512; |Vpg Foil Resistors Y4076120K000B9R RoHS : Compliant |
| 75 | ||
| FMCA1476-12 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 12", 305Mm, Rg316; |Fairview Microwave FMCA1476-12 RoHS : Not Compliant |
| 74 | ||
| FMAT7612-8 | Fairview Microwave Inc | Rf Attenuator, N Male-N Female, 8Db; |Fairview Microwave FMAT7612-8 RoHS : Not Compliant |
| 1 | ||
| 7612 | Starrett Company | Gauge Mux 4 Port- Usb- Rs232- Keyboard Output |Starrett 7612 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX17612CATB+T | Analog Devices Inc | MAX17612A: 4.5V to 60V, 200mA RoHS : Compliant |
| 42,848 | |
| MAX17612BATB+T | Analog Devices Inc | MAX17612A: 4.5V to 60V, 200mA RoHS : Compliant |
| 25,000 | ||
| ICL7612BCSA+ | Analog Devices Inc | Single/Dual/Triple/Quad Operat RoHS : Compliant |
| 9,769 | ||
| ICL7612DCSA+ | Analog Devices Inc | Single/Dual/Triple/Quad Operat RoHS : Compliant |
| 6,285 | ||
| MAX17612AATB+ | Analog Devices Inc | MAX17612A: 4.5V to 60V, 200mA RoHS : Compliant |
| 2,614 | ||
| MAX17612AATB+T | Analog Devices Inc | MAX17612A: 4.5V to 60V, 200mA RoHS : Compliant |
| 586 | ||
| MAX17612AEVKIT# | Analog Devices Inc | Evaluation kit for MAX17612A, |
| 10 | ||
| MAX17612CEVKIT# | Analog Devices Inc | Evaluation kit for MAX17612C, |
| 9 | ||
| ICL7612DESA+ | Analog Devices Inc | Single/Dual/Triple/Quad Operat RoHS : Compliant |
| 0 | ||
| ICL7612DCSA+T | Analog Devices Inc | Single/Dual/Triple/Quad Operat RoHS : Compliant |
| 0 | ||
| ICL7612DESA+T | Analog Devices Inc | Single/Dual/Triple/Quad Operat RoHS : Compliant |
| 0 | ||
| ICL7612BESA+ | Analog Devices Inc | Single/Dual/Triple/Quad Operat RoHS : Compliant |
| 0 | ||
| ICL7612BESA+T | Analog Devices Inc | Single/Dual/Triple/Quad Operat RoHS : Compliant |
| 0 | ||
AD7612BCPZ-RL![]() | Analog Devices Inc | 16-BT Bipolar Pulsar ADC, 1000 RoHS : Compliant |
| 0 | ||
AD7612BSTZ-RL![]() | Analog Devices Inc | 16-BT Bipolar Pulsar ADC, 1000 RoHS : Compliant |
| 0 | ||
![]() RS | 2707612 | RS Pro | STUD TAB TERMINAL, M4, 6.35MM, 45 DEG |
| 1,000 | |
| 37612 (LFZ-M/MSKL 3-12) | icotek Corporation | EMC SHIELD CLAMPS FOR SCREW ASSEMBLY, LF-M/MSKL 3-12 |
| 178 | ||
| R124176123W | Radiall | RF CONNECTOR SMACOM M RA CR RG 142 RoHS : Compliant |
| 42 | ||
| 2907612 (TMC 83C 06A) | Phoenix Contact | CIRCUIT BREAKER THERMAL-MAGNETIC 3 POLE 6A C CURVE UL489 TMC 8 SERIES |
| 24 | ||
| 1761291 | RS Pro | STRAIGHT FEMALE 8-1/8 |
| 20 | ||
| 1761288 | RS Pro | STRAIGHT FEMALE 6-1/8 |
| 20 | ||
| 1761285 | RS Pro | STRAIGHT MALE - BSPP 6-1/2 |
| 20 | ||
| 1761290 | RS Pro | STRAIGHT FEMALE 6-1/4 |
| 9 | ||
| 2451761 (25531234) (MPFI0-800750-100RS) | RS Pro | SCREW, #8-32 X 3/4 PHILLIPS FLAT MACHINE, ZINC PLATED |
| 5 | ||
| 76123000 | Lapp Group | CONN CIR DIN FEMALE CBL CONN METAL STR SCREW 5+PE SOCKET CNTS LS1 SERIES RoHS : Compliant |
| 4 | ||
| 1761297 | RS Pro | PNEUMATIC METAL BULKHEAD FITTING TUBE-TO-TUBE PUSH IN 6MM TO PUSH IN 6MM 2MPA |
| 2 | ||
| 120108-0676 (1201080676) | Woodhead Molex | DOUBLE-ENDED, 4 POLE, M12 FEMALE TO RJ-45 MALE, 2 M, UNSHIELDED, 120108 SERIES |
| 2 | ||
| 1197612 | Phoenix Contact | SACB- 8/3-L-C-M8 HD GG RoHS : Compliant |
| 1 | ||
| XCSLF3737612 | Telemechanique Sensors | METAL INTLK W/O POWER, 24 VAC/DC, W/BUTN |
| 1 | ||
| 761204 (761204 CX 100) | Lapp Group | MULTICONDUCTOR CABLE, 4 COND, 12AWG, FOILED BRAIDED, THERMOPLASTIC, VFD SERIES |
| 1 | ||
![]() Microchip Technology Inc | LE87612MQCT | Microchip Technology Inc | 2CH PLC (MIMO) low power AB HPAV2 Driver, T&R, VQFN, Projected EOL: 2046-04-25 RoHS : Compliant |
| 15,000 | |
| LE87612MQC | Microchip Technology Inc | 2CH PLC (MIMO) low power AB HPAV2 Driver, VQFN, Projected EOL: 2046-04-25 RoHS : Compliant |
| 0 | ||
| LM2576-12WU | Microchip Technology Inc | 3A Step-Down SMPS Regulator, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 0 | ||
| LM2576-12WT | Microchip Technology Inc | 3A Step-Down SMPS Regulator, TO-220, Projected EOL: 2035-12-17 RoHS : Compliant |
| 0 | ||
| LM2576-12WU-TR | Microchip Technology Inc | 3A Step-Down SMPS Regulator, DDPAK, Projected EOL: 2041-08-28 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | SN761210FR![]() | Texas Instruments | Consumer Circuit, Bipolar, PQFP44 |
| 50 | |
| PCI7612ZHK | Texas Instruments | PCMCIA Bus Controller, CMOS, PBGA216 RoHS : Compliant |
| 47,054 | ||
| ACS37612LLUATR-010B5 | Allegro MicroSystems LLC | Current Sensor, Analog, 8 Pin, Plastic RoHS : Compliant |
| 3,252 | ||
HUF76121D3S![]() | Fairchild Semiconductor Corporation | 20A, 30V, 0.023 OHM, N-Channel, LOGIC LEVEL ULTRAFET POWER MOSFET RoHS : Not Compliant |
| 2,192 | ||
HUF76129D3ST![]() | Fairchild Semiconductor Corporation | N-Channel ULTRAFET, POWER MOSFET RoHS : Not Compliant |
| 9,716 | ||
| HUF76129D3ST | Harris Semiconductor | N-Channel ULTRAFET, POWER MOSFET RoHS : Not Compliant |
| 42,200 | ||
| HUF76129P3 | Harris Semiconductor | Power Field-Effect Transistor, 56A I(D), 30V, 0.023ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Not Compliant |
| 24,454 | ||
| ICL7612BCPA1BI | Harris Semiconductor | Operational Amplifier, 7000uV Offset-Max, PDIP8 RoHS : Not Compliant |
| 3 | ||
| ISL5761/2IAZ | Intersil Corporation | D/A Converter, 1 Func, Parallel, Word Input Loading, PDSO28 RoHS : Compliant |
| 103 | ||
ISL5761/2IB![]() | Intersil Corporation | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.035us Settling Time, PDSO28 ' RoHS : Not Compliant |
| 41 | ||
| ISL5761/2IBZ | Intersil Corporation | D/A Converter, 1 Func, Parallel, Word Input Loading, PDSO28 RoHS : Compliant |
| 130 | ||
ICL7612BCSA-T![]() | Maxim Integrated Products | Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant |
| 10,000 | ||
ICL7612BCTV![]() | Maxim Integrated Products | Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, MBCY8 RoHS : Not Compliant |
| 87 | ||
ICL7612DMTV![]() | Rochester Electronics LLC | ICL7612 - Operational Amplifier, 1 Func, 20000uV Offset-Max, CMOS, MBCY8 RoHS : Not Compliant |
| 1,743 | ||
| SP7612AEC6-L | Sipex Corporation | LED Driver, 3-Segment, PDSO6 RoHS : Compliant |
| 1,995 | ||
![]() Sager | 1-1337612-0 | TE Connectivity | RF Connectors / Coaxial Connectors TNC-DUAL CMP JACK-WEATHERPROOF RoHS : Compliant | 0 | ||
| 2076120-1 | TE Connectivity | TE Connectivity WIRE ANVIL RoHS : Compliant | 0 | |||
| 9761202125 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761203016 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761203061 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761203142 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761204033 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761204114 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761205005 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761205050 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761205131 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761206022 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761206103 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761207076 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761207120 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() TME | 5-1676123-0 | TE Connectivity | Resistor: metal oxide; 91Ω; THT; 500mW; ±5%; Ø2.5x7.2mm; -55÷155°C RoHS : Compliant |
| 3,900 | |
| 9-1676123-8 | TE Connectivity | Resistor: metal oxide; 9.1kΩ; THT; 500mW; ±5%; Ø2.5x7.2mm; axial RoHS : Compliant |
| 2,660 | ||
| 7-1676123-6 | TE Connectivity | Resistor: metal oxide; 1.1kΩ; THT; 500mW; ±5%; Ø2.5x7.2mm; axial RoHS : Compliant |
| 759 | ||
| 214761-2105 | Molex | Connector: wire-wire; socket; female; data; Inom: 8.5A; PIN: 1; 22AWG |
| 100 | ||
| STP15076127 | Statictec | Protection bag; ESD; L: 127mm; W: 76mm; Thk: 75um; 100pcs; <100GΩ |
| 2 | ||
| 76124100 | Lapp Group | Connector: LS1; plug; PIN: 8(4+4); female; crimped; for cable; IP68 RoHS : Compliant |
| 0 | ||
| 9457612500 | Weidmüller Interface GmbH & Co. KG | 9457612500 RoHS : Compliant |
| 0 | ||
| 76125-74G | KING TONY | Centre punch; with holder |
| 0 | ||
| 76123000 | Lapp Group | Connector: LS1; plug; PIN: 6; female; crimped; for cable; straight RoHS : Compliant |
| 0 | ||
| 10047612 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 14; SMT; 3A; 250V |
| 0 | ||
| 007-7612A | DOSPEL S.A. | Fan: AC; Ø118mm; 160x160x86mm; axial; 230VAC; 150m3/h; 46dBA; slide |
| 0 | ||
| GN 114.7-6-12 | Elesa+Ganter | Locking pin; with locking; steel; Ø: 6mm; Working part len: 12mm |
| 0 | ||
| 76 12 125 | KNIPEX | Pliers: cutting; side; 125mm; with side face |
| 0 | ||
| 8-1676123-2 | TE Connectivity | Resistor: metal oxide; 2kΩ; THT; 500mW; ±5%; Ø2.5x7.2mm; -55÷155°C RoHS : Compliant |
| 0 | ||
| 6-1676123-4 | TE Connectivity | Resistor: metal oxide; 360Ω; THT; 500mW; ±5%; Ø2.5x7.2mm; -55÷155°C RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | TMUX7612PWR | Texas Instruments | RoHS : Compliant | 21,698 | ||
AD7612BSTZ![]() | Analog Devices Inc | IC ADC 16BIT 750KSPS SAR 48-LQFP RoHS : Compliant | 221 | |||
DAC7612U![]() | Texas Instruments | IC: D/A converter; 12bit; Channels: 2; 4.75÷5.25V; SO8 RoHS : Compliant | 64 | |||
![]() ComSIT USA | AD7612BSTZ![]() | Analog Devices Inc | AVAILABLE EU RoHS : Compliant | 101 | ||
![]() ComSIT USA | HUF76129D3ST![]() | Fairchild Semiconductor Corporation | 20A, 30V, 0.016 OHM, N-CHANNEL, LOGIC LEVEL ULTRAFET POWER MOSFET Power Field-Effect Transistor, 20A I(D), 30V, 0.023ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA RoHS : Not Compliant | 7,500 | ||
| MAL215097612E3 | Vishay Intertechnologies | ALUMINUM ELECTROLYTIC CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3131 RoHS : Compliant | 2,000 | |||
| ISL76123AHZ | Intersil Corporation | AUTOMOTIVE SINGLE SUPPLY, SPDT ANALOG SWITCH SPDT, 1 Func, PDSO6 RoHS : Compliant | 1,755 | |||
| LM257612WT | Micrel Inc | 52 kHz Simple 3A Buck Regulator Switching Regulator, 7.5A, 63kHz Switching Freq-Max RoHS : Not Compliant | 300 | |||
ICL7612DCSA+T![]() | Maxim Integrated Products | Op Amp Single Low Power Amplifier R-R O/P �8V/16V 8-Pin SOIC N T/R RoHS : Compliant | 280 | |||
AD7612BCPZ![]() | Analog Devices Inc | 16-BIT, 750 KSPS, UNIPOLAR/BIPOLAR PROGRAMMABLE INPUT PULSAR ADC ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Parallel, 8 Bits, Parallel, Word Access, CMOS RoHS : Compliant | 237 | |||
ICL7612DCPA![]() | Intersil Corporation | 1.4MHZ, LOW POWER CMOS OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 2000uV Offset-Max, CMOS, PDIP8 RoHS : Not Compliant | 75 | |||
| ICL7612DCBAZ | Intersil Corporation | 1.4MHz, Low Power CMOS Operational Amplifier Operational Amplifier, 1 Func, 20000uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 65 | |||
| ICL7612DESAT | Maxim Integrated Products | SINGLE OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 20000uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 64 | |||
| 9681537612 | HARTING Technology Group | D-SUB STD 9P FEM ANGLED BOARD LOCKS D Subminiature Connector, 9 Contact(s), Female, 0.108 inch Pitch, Solder Terminal, #4-40, Plug RoHS : Compliant | 50 | |||
| MP7612BN | MSi | D/A Converter, 1 Func, Serial Input Loading, 30us Settling Time, PDIP28 RoHS : Not Compliant | 48 | |||
ICL7612BMTV![]() | Maxim Integrated Products | OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, MBCY8 RoHS : Not Compliant | 13 | |||
![]() Interstate Connecting Components | M28876/12F12S4 | Amphenol Fiber Systems International | FIBER JN WITH STRT BKSHL |
| 36 | |
| M28876/12B12S5 | Amphenol Fiber Systems International | FIBER JN RCPT 4 CHNL MIL WITH STRT BKSHL |
| 12 | ||
| M28876/12B12S4 | Amphenol Fiber Systems International | FIBER JN RCPT |
| 5 | ||
| 10-761276-125 | Amphenol Industrial Operations | 5.7 SL+ REC BK M4 SCREW TYPE | 0 | |||
| A850497612X04 | Amphenol PCD | M8504976-12X04 | 0 | |||
| 9-1676123-0 | TE Connectivity | 1/2W SM M/OX 5% 4K3 RoHS : Compliant |
| 0 | ||
| 5-1676123-9 | TE Connectivity | 1/2W SM M/OX 5% 220R RoHS : Compliant |
| 0 | ||
| DBAS 76-12-0 PN | TE Connectivity | DBAS 76-12-0 PN | 0 | |||
| 5-1676123-6 | TE Connectivity | 1/2W SM M/OX 5% 160R RoHS : Compliant |
| 0 | ||
| 2389761-2 | TE Connectivity | CABLE PROXIMITY SENSOR HOME TO | 0 | |||
| M28876/12C13S6 | Glenair Inc | 28876 J/N RECP 8C SKT w/ STR B/S |
| 0 | ||
| 5-1676123-0 | TE Connectivity | 1/2W SM M/OX 5% 91R RoHS : Compliant |
| 0 | ||
| M28876/12B12S4 | Glenair Inc | 28876 J/N RECP 4C SKT w/ STR B/S |
| 0 | ||
| M28876/12C21S3 | Glenair Inc | 28876 J/N RECP 6C SKT w/ STR B/S |
| 0 | ||
| M28876/12B12S5 | Glenair Inc | 28876 J/N RECP 4C SKT w/ STR B/S |
| 0 | ||
![]() NexGen Digital | ICL7612DCBAZ | Renesas Electronics Corporation | RoHS : Compliant | 2,204 | ||
| ACS37612LLUALU-015B5 | Allegro MicroSystems LLC | 84 | ||||
![]() PEI Genesis | C10-670176-12D | Amphenol Corporation |
| 65 | ||
| J176-126-3.5A | SOURIAU-SUNBANK |
| 0 | |||
| J1176-12 | SOURIAU-SUNBANK |
| 0 | |||
| 514-7612-0511-302 | Dialight |
| 0 | |||
| M85049/76-12N03 | Amphenol PCD |
| 0 | |||
| M85049/76-12N03 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/76-12W04 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/76-12W04 | Amphenol PCD |
| 0 | |||
| 2698376-12 | SOURIAU-SUNBANK |
| 0 | |||
| 12273176-120 | HellermannTyton |
| 0 | |||
| S4376-12050342E | SOURIAU-SUNBANK |
| 0 | |||
| S1776-12 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/76-12W02 | Amphenol PCD |
| 0 | |||
| M85049/76-12W02 | SOURIAU-SUNBANK |
| 0 | |||
| 10-729876-123 | Amphenol Corporation |
| 0 | |||
![]() PUI | 12.97612 | 17,700 | ||||
![]() Chip 1 Exchange | ECS-.327-6-12-TR9 | ECS International Inc | INSTOCK | 93,600 | ||
| 34897-6120 | Molex | INSTOCK RoHS : Compliant | 40,193 | |||
| M7612-S16NL | INSTOCK | 39,488 | ||||
| 12.97612 | Geyer Electronic E K | INSTOCK | 12,700 | |||
| 1SNA167612R2400 | TE Connectivity | INSTOCK | 6,474 | |||
| HT7612-TR | Holtek Semiconductor Inc | INSTOCK | 6,350 | |||
| HT7612B-TR/NSOP | Holtek Semiconductor Inc | INSTOCK | 3,248 | |||
| M20-8761242 | Harwin | INSTOCK RoHS : Compliant | 2,000 | |||
| MAX17612AATB+ | Analog Devices Inc | INSTOCK RoHS : Compliant | 1,654 | |||
| FPD7612 | INSTOCK | 1,225 | ||||
| HDF-07.3761-20-3050-4085-60 | INSTOCK | 700 | ||||
| 6.17.612 | ETTGR | INSTOCK | 453 | |||
| AC-761222078 | INSTOCK | 100 | ||||
| AC-761222-078 | Amphenol Corporation | INSTOCK | 25 | |||
| M20-9761246 | Harwin | INSTOCK RoHS : Compliant | 16 | |||
![]() Avnet Abacus | ECS-.327-6-12R-TR | ECS International Inc | Crystal 32768 kHz SMD 2mm x 12mm 6 pF 20 ppm ECX12R Series - Tape and Reel (Alt: ECS-.327-6-12R-TR) RoHS : Compliant | 51,000 | ||
| 10157376-12101LF | Amphenol Corporation | - Tape and Reel (Alt: 10157376-12101LF) RoHS : Compliant | 12,000 | |||
| ECS-.327-6-12-TR | ECS International Inc | Crystal 32768 kHz SMD 2mm x 12mm 6 pF 20 ppm ECX12 Series - Tape and Reel (Alt: ECS-.327-6-12-TR) RoHS : Compliant | 9,000 | |||
| 1776126 | Phoenix Contact | MSTB 25 6STZ508 MSTB256STZ508 (Alt: 1776126) RoHS : Compliant | 150 | |||
| 948761-2 | TE Connectivity | General Hand Tool Used In The Aircraft And Military Industries (Alt: 948761-2) RoHS : Compliant | 0 | |||
| 948761-2 | TE Connectivity | General Hand Tool Used In The Aircraft And Military Industries (Alt: 948761-2) RoHS : Not Compliant | 0 | |||
| 2147612222 | Molex | (Alt: 2147612222) RoHS : Compliant | 0 | |||
| 2147612222 | Molex | PreCrimped Lead MicroFit 30 FemaletoPigtail (Alt: 2147612222) RoHS : Compliant | 0 | |||
| 1-1337612-0 | TE Connectivity | Conn TNC PL 0Hz to 11GHz 50Ohm ST Cable Mount Gold Individual (Alt: 1-1337612-0) RoHS : Compliant | 0 | |||
| 5-1676123-9 | TE Connectivity | Resistor 220 Ohm 5 5 W Axial Leaded Metal Oxide Power Flame Proof (Alt: 5-1676123-9) RoHS : Compliant | 0 | |||
| FN7612-10-M3 | TE Connectivity | (Alt: 801808-SF) RoHS : Compliant | 0 | |||
| MAL215976121E3 | Vishay Intertechnologies | (Alt: MAL215976121E3) RoHS : Compliant | 0 | |||
| MAL215876123E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor 12000 uF 25 V 20 SnapIn (Alt: MAL215876123E3) RoHS : Compliant | 0 | |||
| MKP1847612354P5 | Vishay Intertechnologies | (Alt: MKP1847612354P5) RoHS : Compliant | 0 | |||
| ECS-.327-6-1210-TR | ECS International Inc | Crystal 32768KHz 6pF 2Pin SMD 1210 TR - Tape and Reel (Alt: ECS-.327-6-1210-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | QPF7612QTR13 | Qorvo | LB PAMID LTE PA MODULE (Alt: QPF7612QTR13) RoHS : Compliant | 0 | ||
| 10170761-201A001LF | Amphenol Corporation | FCI10170761-201A001LF PWRMAX RAH 2LP+6S+ (Alt: 10170761-201A001LF) RoHS : Compliant | 0 | |||
| QPF7612QSR | Qorvo | MHB RF FUSION MODULE (Alt: QPF7612QSR) RoHS : Compliant | 0 | |||
| NCV76124MW0R2G | onsemi | (Alt: NCV76124MW0R2G) RoHS : Compliant | 0 | |||
| MAL215097612E3 | Vishay Intertechnologies | SMD Aluminium Electrolytic Capacitor, Radial Can - SMD, 220 uF, 25 V, 2500 hours @ 105?C, Polar (Alt: MAL215097612E3) RoHS : Compliant | 0 | |||
| 5018761240 | Molex | Pin Header, 12 Contacts, 2 Rows, 2mm, Matte Tin, 2A, Right Angle, Shrouded, Brass, Wire-to-Board (Alt: 5018761240) RoHS : Compliant | 0 | |||
| ECS-.327-6-1210B-N-TR | ECS International Inc | Crystal, Tuning Fork, 32.768 kHz, SMD, 1.2mm x 1mm x 0.35mm, 6 pF, 20 ppm, ECX-1210B (Alt: ECS-.327-6-1210B-N-TR) RoHS : Compliant | 0 | |||
| C10-761296-Z2S | Amphenol Corporation | CIRCULAR CONNECTOR (Alt: C10-761296-Z2S) RoHS : Compliant | 0 | |||
| 22337612 | Qnity Laird | COOLZORB ULTRA (Alt: 22337612) RoHS : Compliant | 0 | |||
| ECS-.327-6-12-TR | ECS International Inc | Crystal, 32.768 kHz, SMD, 2mm x 1.2mm, 6 pF, 20 ppm, ECX-12 Series (Alt: ECS-.327-6-12-TR) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | ICL7612DCBAZ | Renesas Electronics Corporation | OP Amp Single GP 8V16V 8Pin SOIC N (Alt: ICL7612DCBAZ) RoHS : Compliant | 1,960 | ||
| LM2576-12WU | Microchip Technology Inc | 3A STEPDOWN SMPS REGULATOR (Alt: LM2576-12WU) RoHS : Compliant | 0 | |||
| LE87612MQCT | Microchip Technology Inc | IC Line Driver 100mA 28Pin QFN TR (Alt: LE87612MQCT) RoHS : Compliant | 0 | |||
| LM2576-12WT | Microchip Technology Inc | 3A STEPDOWN SMPS REGULATOR (Alt: LM2576-12WT) RoHS : Compliant | 0 | |||
| ICL7612DCPAZ | Renesas Electronics Corporation | (Alt: ICL7612DCPAZ) RoHS : Compliant | 0 | |||
| ICL7612DCBAZ-T | Renesas Electronics Corporation | (Alt: ICL7612DCBAZ-T) RoHS : Compliant | 0 | |||
| 5962-8761201DA | Teledyne HiRel | NOR Gate Quad 2 Input 14 Pins CFP (Alt: 5962-8761201DA) RoHS : Not Compliant | 0 | |||
| LM2576-12WU-TR | Microchip Technology Inc | (Alt: LM2576-12WU-TR) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 78207-612 | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 400 | |
| 67612-9703 | Molex | IN STOCK SHIP TODAY | 198 | |||
HUF76129D3ST![]() | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant | 52 | |||
ICL7612BCPA![]() | Maxim Integrated Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 48 | ||
![]() DB Roberts | 47-61-212-50 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. |
| 847 | |
| 47-61-250-54 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-61-201-25 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| D3-376-121-191 | Southco | D3-376-121-191 | 0 | |||
| D3-376-124-170 | Southco | D3-376-124-170 | 0 | |||
| 76120321200 | Essentra Components | LATCH, CAM QTR TURN EASY INSTA | 0 | |||
| 47-61-241-25 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 5476-12 | HeliCoil | 0 | ||||
| S14276-12 | Heyco | S6474-TL-50-078-12 BLACK | 0 | |||
| 47-61-210-54 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-61-232-14 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-61-261-21 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-61-292-54 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-61-201-64 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-61-210-55 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
![]() EBV Elektronik | LM2576-12WU | Microchip Technology Inc | 3A STEPDOWN SMPS REGULATOR (Alt: LM2576-12WU) RoHS : Compliant | 0 | ||
| LE87612MQCT | Microchip Technology Inc | IC Line Driver 100mA 28Pin QFN TR (Alt: LE87612MQCT) RoHS : Compliant | 0 | |||
| LM2576-12WT | Microchip Technology Inc | 3A STEPDOWN SMPS REGULATOR (Alt: LM2576-12WT) RoHS : Compliant | 0 | |||
| NCV76124MW0R2G | onsemi | Rain and Light Sensor Interface with SPI Rain and light sensor interface with SPI (Alt: NCV76124MW0R2G) RoHS : Compliant | 0 | |||
| LM2576-12WU-TR | Microchip Technology Inc | (Alt: LM2576-12WU-TR) RoHS : Compliant | 0 | |||
![]() ECCO | MS90376-12R | StockCap |
| 8,050 | ||
![]() Flip Electronics | XR76121EL-F | MaxLinear Inc | Stock RoHS : Compliant | 95,000 | ||
| XR76121ELTR-F | MaxLinear Inc | Stock, Ship Today RoHS : Compliant |
| 95,000 | ||
![]() Master Electronics | 5-1676123-0 | TE Connectivity | 1/2W SM M/OX 5% 91R RoHS : Compliant |
| 15,000 | |
| FN7612-10-M3 | TE Connectivity | Single Phase Bulkhead 10 A AC Feedthrough Filter M3 Terminal | Schaffner FN7612-10-M3 RoHS : Compliant |
| 14 | ||
| 197612GN | EECO Switch | Switch Thumb-Pushwheel Thumbwheel BCD Complement 10 3A 115VAC 28VDC Solder Lug Panel Mount RoHS : Compliant |
| 7 | ||
| 214761-2105 | Molex | Micro-Fit 3.0 Female-to-Pigtail - Tin (Sn) Plated - 450.00mm Length - 22 AWG - Red RoHS : Compliant |
| 0 | ||
| 2076120-1 | TE Connectivity | WIRE ANVIL RoHS : Compliant |
| 0 | ||
| 9-1676123-0 | TE Connectivity | 1/2W SM M/OX 5% 4K3 RoHS : Compliant |
| 0 | ||
| 5-1676123-9 | TE Connectivity | 1/2W SM M/OX 5% 220R RoHS : Compliant |
| 0 | ||
| DBAS-76-12-0-SN-A5578 | TE Connectivity | DBAS 76-12-0 SN-A5578 MOQ Reduction RoHS : Compliant |
| 0 | ||
| F27612 | Thomas & Betts | Cylindrical Multi Contact Connector - 4P4W - 200A - Reverse Service RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-176-122 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 5-1676123-6 | TE Connectivity | 1/2W SM M/OX 5% 160R RoHS : Compliant |
| 0 | ||
| 9-1676123-8 | TE Connectivity | 1/2W SM M/OX 5% 9K1 RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-176-121 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-176-124 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 948761-2 | TE Connectivity | The 948761-2 is a manual hand crimping tool designed for commercial applications with removable die sets. MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C0076-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to TNC Male Low Loss Cable 12 Inch Length Using LMR-240 Coax., Radio frequency assembly TNC male to TNC male low loss cable 12 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 12 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0076-12 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C0076-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 12 inch length using LMR-240 coax. |
| 1,925 | |
| PE3C4876-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Jack Right Angle 2 Hole Flange to Slide-On BMA Jack Right Angle 2 Hole Flange Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA jack right angle 2 hole flange to slide-on BMA jack right angle 2 hole flange cable 12 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack right angle 2 hole flange to slide-on BMA jack right angle 2 hole flange cable 12 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BMA 2 hole flange cable connection on one end and right angle BMA 2 hole flange cable connection on the other. Our right angle BMA to right angle BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4876-12, can also be known as a right angle BMA female to right angle BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4876-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with right angle BMA to right angle BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency BMA right angle jack 2 hole flange to BMA right angle jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA right angle female 2 hole flange to BMA right angle female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack right angle 2 hole flange to slide-on BMA jack right angle 2 hole flange cable 12 inch length using RG405 coax. |
| 152 | ||
| PE3M0076-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 12 inches. MIL-DTL-17 N Female Bulkhead to SMA Male Cable 12 Inch Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to SMA male cable 12 inch length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to SMA male cable 12 inch length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 N type to M39012/55-3028 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 type N bulkhead cable connection on one end and M39012/55-3028 SMA cable connection on the other. Our M39012/03-0503 type N to M39012/55-3028 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 type N to M39012/55-3028 SMA cable is a female to male coax assembly, PE3M0076-12, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 type N jack to M39012/55-3028 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 N type jack to M39012/55-3028 SMA plug cable assembly PE3M0076-12 is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 N type to M39012/55-3028 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 type N female bulkhead to M39012/55-3028 SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0076-12 can also be used in the other direction and will be M39012/55-3028 SMA male to M39012/03-0503 type N female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 type N jack bulkhead to M39012/55-3028 SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 N type to M39012/55-3028 SMA cable assembly for quick shipment worldwide. Variations of M39012/03-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to SMA male cable 12 inch length using M17/128-RG400 coax. |
| 125 | ||
| PE3C5876-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum QMA Male Right Angle to SMA Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum QMA male right angle to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum QMA male right angle to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle QMA cable connection on one end and SMA cable connection on the other. Our low PIM right angle QMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to SMA cable is a male to male coax assembly, PE3C5876-12, can also be known as a low PIM right angle QMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to SMA plug cable assembly PE3C5876-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated QMA cable assembly is manufactured with right angle QMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM QMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5876-12 can also be used in the other direction and will be SMA male to right angle QMA male cable assembly if the opposite connectivity is required. Low PIM QMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum QMA male right angle to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder. |
| 42 | ||
| PE7612-5 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 5 dB Fixed Attenuator N-Type Male to N-Type Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7612-5 is a 5 dB fixed attenuator from Pasternack. This 5 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 5 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 5 dB. The Pasternack PE7612-5 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7612-5 will ship the same business day as purchased from Pasternack’s production facility. This 5 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 12 | ||
| PE7612-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator N-Type Male to N-Type Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7612-3 is a 3 dB fixed attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7612-3 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7612-3 will ship the same business day as purchased from Pasternack’s production facility. This 3 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 10 | ||
| PE3C10761-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 1.85mm Male to 1.85mm Male Cable 24 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10761-24 1.85mm male to 1.85mm male RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 1.85mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a male gender on end 1 and a male on end 2. PE3C10761-24 can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10761-24 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to 1.85mm male cable has a maximum VSWR of 1.4:1. This PE3C10761-24 1.85mm plug to 1.85mm plug cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. This 1.85mm plug to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm RF cable assembly as per your requirements. |
| 1 | ||
| PE7612-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator N-Type Male to N-Type Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7612-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 1 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7612-30 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7612-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE34576-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 12 inches. 3.5mm Male to 3.5mm Male Cable 12 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 3.5mm male to 3.5mm male cable 12 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm male to 3.5mm male cable 12 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 3.5mm cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and male on end 2. This 3.5mm to 3.5mm cable is a male to male coax assembly, PE34576-12, can also be known as a 3.5mm plug to 3.5mm plug cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm plug cable assembly PE34576-12 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 35 GHz maximum frequency 3.5mm male to 3.5mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 3.5mm plug to 3.5mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm male to 3.5mm male cable 12 inch length using PE-SR405AL coax. |
| 0 | ||
| PE3C3376-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. SMA Male Right Angle to BNC Male Cable 12 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly SMA male right angle to BNC male cable 12 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to BNC male cable 12 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and BNC cable connection on the other. Our right angle SMA to BNC cable assembly has male gender on end 1 and male on end 2. PE3C3376-12 can also be known as a right angle SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.394 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to BNC plug cable assembly PE3C3376-12 is built with RG179 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3376-12 RF cable are available on our downloadable PDF datasheet.PE3C3376-12 can also be used in the other direction and will be BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE34476-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMC Plug Right Angle to SMC Jack Bulkhead Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly SMC plug right angle to SMC jack bulkhead cable 12 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug right angle to SMC jack bulkhead cable 12 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMC cable connection on one end and SMC bulkhead cable connection on the other. Our right angle SMC to SMC cable assemblies have a plug gender on end 1 and jack on end 2. This SMC to SMC cable is a plug to jack coax assembly, PE34476-12, can also be known as a right angle SMC male to SMC female cable assembly and will be shipped same-day as it is purchased. SMC male to SMC female cable assembly PE34476-12 is built with RG58 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with right angle SMC to SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMC right angle plug to SMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34476-12 can also be used in the other direction and will be SMC jack bulkhead to right angle SMC plug cable assembly if the opposite connectivity is required. SMC right angle male to SMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug right angle to SMC jack bulkhead cable 12 inch length using RG58 coax. |
| 0 | ||
| PE3C2276-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to TNC Female Bulkhead Low Loss Cable 12 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N male to TNC female bulkhead low loss cable 12 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to TNC female bulkhead low loss cable 12 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC bulkhead cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and female on end 2. This type N to TNC cable is a male to female coax assembly, PE3C2276-12, can also be known as a low loss N type plug to TNC jack cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC jack cable assembly PE3C2276-12 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2276-12 can also be used in the other direction and will be TNC female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC female bulkhead low loss cable 12 inch length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE33576-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMB Jack to SMB Jack Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly SMB jack to SMB jack cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB jack to SMB jack cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMB cable connection on one end and a SMB cable connection on the other. Our SMB to SMB cable assembly has a jack gender on end 1 and a jack on end 2. PE33576-12 can also be known as a SMB female to SMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE33576-12 RF cable has a FEP jacket of 0.098-inch diameter. The flexible RF cable has an in-series connection. Our SMB jack to SMB jack cable has a maximum VSWR of 1.4:1. SMB female to SMB female cable assembly PE33576-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMB cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMB female to SMB female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to SMB RF cable assembly as per your requirements. |
| 0 | ||
| PE3M0176-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Temperature Conditioned N Male to N Male Right Angle Low Loss Cable 12 Inch Length Using PE-P142LL Coax., Pasternack temperature conditioned N male to N male right angle low loss cable 12 inch length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0176-12 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability N type to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with type N connection on one end and right angle type N connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly. PE3M0176-12 can also be known as a temperature conditioned low loss type N plug to right angle N type plug cable assembly and will be shipped the same day after it is purchased. type N plug to type N plug cable assembly PE3M0176-12 is built with PE-P142LL which is a flexible coax. The Pasternack flexible type N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency type N male to type N right angle male cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0176-12 can be used in the other direction and will be right angle type N male to N type male cable assembly. Pasternack high reliability low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for same-day shipment worldwide. Variations of PE44825 N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned N male to N male right angle low loss cable 12 inch length using PE-P142LL coax. |
| 0 | ||
| PE3476-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to BNC Male Cable 12 Inch Length Using RG223 Coax., Radio frequency assembly N male to BNC male cable 12 inch length using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to BNC male cable 12 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and BNC cable connection on the other. Our type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3476-12, can also be known as a N type plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3476-12 is built with RG223 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3476-12 can also be used in the other direction and will be BNC male to N type male cable assembly if the opposite connectivity is required. N type plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male cable 12 inch length using RG223 coax. |
| 0 | ||
![]() Teledyne HiRel | 5962-8761201DA | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | ||
| 5962-87612012A | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| 5962-8761201CA | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
![]() Vyrian | MAL215876123E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 12000uF, Through Hole Mount RoHS : Compliant | 15,728 | ||
| MAX17612AEVKIT | Analog Devices (Maxim Integrated) | 12,246 | ||||
| MAX17612AATB+ | Analog Devices Inc | RoHS : Compliant | 10,743 | |||
| ICL7612DESA+ | Analog Devices Inc | Operational Amplifier, 1 Func, 20000uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 10,067 | |||
| ACMD-7612-TR1G | Broadcom Limited | 9,662 | ||||
ICL7612BCSA-T![]() | Maxim Integrated Products | Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 9,477 | |||
| MAX17612BEVKIT | Analog Devices (Maxim Integrated) | 9,332 | ||||
5962F8761201XC![]() | STMicroelectronics | 9,055 | ||||
| 5962F8761201VYC | STMicroelectronics | RoHS : Compliant | 6,440 | |||
5962F8761201V9A![]() | STMicroelectronics | 5,983 | ||||
| EVAL-ADV7612EB1Z | Analog Devices Inc | Development kits/Accessories RoHS : Compliant | 5,835 | |||
SN761210FR![]() | Texas Instruments | Consumer Circuit, Bipolar, PQFP44 | 4,825 | |||
ICL7612DESA-T![]() | Maxim Integrated Products | Operational Amplifier, 1 Func, 20000uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 4,159 | |||
| 5962-8761202FA | Texas Instruments | 4,093 | ||||
ICL7612BESA-T![]() | Maxim Integrated Products | Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 671 | |||
![]() Win Source Electronics | MT7612EN/B | MediaTek |
| 9,900 | ||
DAC7612U![]() | Texas Instruments | IC 12-BIT DUAL/SER D/A 8-SOIC RoHS : Compliant |
| 5,000 | ||
DAC7612UG4![]() | Texas Instruments | Dual, 12-Bit Serial Input DIGITAL-TO-ANALOG CONVERTER RoHS : Compliant |
| 4,780 | ||
| MTM761230LBF | Panasonic Electronic Components | MOSFET P-CH 20V 3A WSMINI6 RoHS : Compliant |
| 4,697 | ||
DAC7612U/2K5G4![]() | Texas Instruments | IC DUAL/SER 12BIT GP D/A 8-SOIC RoHS : Compliant |
| 4,600 | ||
DAC7612U/2K5![]() | Texas Instruments | DAC 2-CH R-2R 12-bit 8-Pin SOIC T/R / IC DUAL/SER 12BIT GP D/A 8-SOIC RoHS : Compliant |
| 4,590 | ||
ADV7612BSWZ![]() | Analog Devices Inc | IC RCVR HDMI 225MHZ 100LQFP RoHS : Compliant |
| 3,615 | ||
| IT7612MS | Protek Power / ITE Power Supplies |
| 3,000 | |||
| 501876-1240 | Molex | 501876-1240 Molex Headers & Wire Housings IGRID 12P RA HDR DUAL ROW datasheet, inventory, & pricing. |
| 3,000 | ||
DAC7612UB/2K5![]() | Texas Instruments | IC DAC 12BIT V-OUT 8SOIC / Dual, 12-Bit Serial Input DIGITAL-TO-ANALOG CONVERTER RoHS : Compliant |
| 2,111 | ||
| IT7612MS/BY | Protek Power / ITE Power Supplies |
| 1,000 | |||
DAC7612UB![]() | Texas Instruments | IC 12-BIT DUAL/SER D/A 8-SOIC RoHS : Compliant |
| 654 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |