| データシートサーチシステム |
|
8043F6HKP 販売店 |
| 販売店 | 部品番号 | メーカー | 部品情報 | Price | Qty. BuyNow | |
![]() Microchip Technology Inc | APT8043BLLG | Microchip Technology Inc | MOSFET MOS 7 800 V 430 mOhm TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 542 | |
| APT8043BFLLG | Microchip Technology Inc | FREDFET MOS 7 800 V 430 mOhm TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT8043SFLLG | Microchip Technology Inc | FREDFET MOS 7 800 V 430 mOhm TO-268, TO-268, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| PM8043B-F3EI | Microchip Technology Inc | SXP 24x12G, FBGA, Projected EOL: 2046-01-23 - Contact for Pricing RoHS : Compliant | 0 | |||
| 090-11008-043 | Microchip Technology Inc | IGM-1100 FOR EXTERNAL ANTENNA, ZERO TOUCH PROVISIONING CONFI, Projected EOL: 2051-01-13 RoHS : Compliant |
| 0 | ||
| 090-11308-043 | Microchip Technology Inc | IGM-1100 PLUS FOR EXTERNAL ANTENNA - ZERO TOUCH PROV. CONFIG, Projected EOL: 2051-01-13 RoHS : Compliant |
| 0 | ||
| 070-01618-043 | Microchip Technology Inc | LABEL UPC BARCODE 990-15202-075, Projected EOL: 2051-01-13 - Contact for Pricing | 0 | |||
| LAN8043-V/3HW | Microchip Technology Inc | 4 Port 25GbE XFI/SFI PHY with IEEE 1588, FCCSP, Projected EOL: 2051-07-18 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 5804-383-3 | Seastrom Mfg | 1,117 | |||
| 1280-43-N-0 | RAF Electronic Hardware | 604 | ||||
| M38527/08-043P | Micro Dimensional Products Inc | 509 | ||||
| 5804-384-2 | Seastrom Mfg | 264 | ||||
| 5804-34-1 | Seastrom Mfg | 245 | ||||
| 0.188-0.438-0.060FLT ST ZC | WASHERS | 237 | ||||
| 5804-31-1 | Seastrom Mfg | 198 | ||||
| 5804-301-2 | Seastrom Mfg | 185 | ||||
| 5804-300-1 | Seastrom Mfg | 92 | ||||
| 5804-399-3 | Seastrom Mfg | 46 | ||||
| 09-50-8043 | Molex | RoHS : Compliant | 45 | |||
| ST4M138-04-34 | MISC. BEARINGS/BUSHINGS | 7 | ||||
| 5804-315-3 | Seastrom Mfg | 7 | ||||
| 1280-43-SS-20 | RAF Electronic Hardware | 2 | ||||
| M38527/08-043P | Military Specifications | 1 | ||||
![]() Ameya Holding Limited | TUSB8043ARGCT![]() | Texas Instruments | RoHS : Compliant | 4,085 | ||
TUSB8043ARGCR![]() | Texas Instruments | RoHS : Compliant | 2,627 | |||
TUSB8043AIRGCR![]() | Texas Instruments | RoHS : Compliant | 115 | |||
![]() ComSIT USA | 760804310 | AVAILABLE EU | 155 | |||
![]() PEI Genesis | S4212C28125R-A-08-043 | SOURIAU-SUNBANK |
| 0 | ||
| SE23C1804-34 | SOURIAU-SUNBANK |
| 0 | |||
| 10-804341 | Amphenol Corporation |
| 0 | |||
| M39029/80-438 | Tri-Star Electronics International |
| 0 | |||
| S4049FR2804-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4179FS0804-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4212C31150R-A-8-043 | SOURIAU-SUNBANK |
| 0 | |||
| 110238-0431 | ITT Interconnect Solutions |
| 0 | |||
| S5091C0804-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4179CS0804-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4732-2808-04-34 | SOURIAU-SUNBANK |
| 0 | |||
| 556-3804-324F | Dialight | RoHS : Compliant |
| 0 | ||
| S2636-1804-34 | SOURIAU-SUNBANK |
| 0 | |||
| 280430 | Amphenol Corporation |
| 0 | |||
| S4212C31125R-A-8-043 | SOURIAU-SUNBANK |
| 0 | |||
![]() PUI | 12.88043 | 14,000 | ||||
| 2012-2X07G00S/028/043/J | 2,300 | |||||
| 2012-2X05G00S/028/043/J | 1,439 | |||||
| 2012-2X01G00S/028/043/J | 153 | |||||
![]() Avnet Asia | 2508043-3 | TE Connectivity | (Alt: 2508043-3) RoHS : Compliant | 0 | ||
| 1078043 | Qorvo | (Alt: 1078043) RoHS : Compliant | 0 | |||
| AXK6S80437YG | Panasonic Electronic Components | (Alt: AXK6S80437YG) RoHS : Compliant | 0 | |||
| 10168043-2010LF | Amphenol Corporation | (Alt: 10168043-2010LF) RoHS : Compliant | 0 | |||
| V80431500000G | Amphenol Corporation | (Alt: V80431500000G) RoHS : Compliant | 0 | |||
| 2508043-1 | TE Connectivity | (Alt: 2508043-1) RoHS : Compliant | 0 | |||
| 10144518-043822LF | Amphenol Corporation | (Alt: 10144518-043822LF) RoHS : Compliant | 0 | |||
| 10144518-043802LF | Amphenol Corporation | Conn Stacking HDR 6.7mm Stack Height 40 POS 0.8mm Solder ST SMD T/R (Alt: 10144518-043802LF) RoHS : Compliant | 0 | |||
| 968043-1 | TE Connectivity | (Alt: 968043-1) RoHS : Compliant | 0 | |||
| 180430-2 | TE Connectivity | Quick Disconnect Terminal 16-20AWG RCP 16.6mm Tin Loose Piece (Alt: 180430-2) RoHS : Compliant | 0 | |||
![]() Avnet Silica | APT8043BLLG | Microchip Technology Inc | (Alt: APT8043BLLG) RoHS : Compliant | 0 | ||
| EMI8043MUTAG | onsemi | Common Mode Filter with ESD Protection750MHz CM Stop Band Attenuation for HDMI Interfaces Three Pair EMI Filter Consumer Qualified ONSSPCPRTCNIW2U6D (Alt: EMI8043MUTAG) RoHS : Compliant | 0 | |||
| APT8043BFLLG | Microchip Technology Inc | (Alt: APT8043BFLLG) RoHS : Compliant | 0 | |||
| APT8043SFLLG | Microchip Technology Inc | (Alt: APT8043SFLLG) RoHS : Compliant | 0 | |||
| LAN8043-V/3HW | Microchip Technology Inc | Quad 11025G 1588MACsec Optical Ethernet PHY Transceiver (Alt: LAN8043-V/3HW) RoHS : Compliant | 0 | |||
| B39272B8043P810 | Qualcomm RFFE Filter Products | SAW Duplexer 2535MHz 2655MHz SMD (Alt: B39272B8043P810) RoHS : Compliant | 0 | |||
| TGA2533-SM/1078043 | Qorvo | 125155 GHz Ku Bd PA (Alt: 1078043) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AX7DAF1-804.3100T![]() | Abracon Corporation | XTAL OSC XO 804.3100MHZ LVDS SMD RoHS : Compliant |
| 0 | |
![]() DB Roberts | 5804-310-2 | Seastrom Mfg |
| 73 | ||
| 980435018 | Haeger | BEARING RAM |
| 1 | ||
| 980435096 | Haeger | SERIES 4 PRESS |
| 1 | ||
| 8043 | Heyco | 8043-000 LAMPTRM LH #39116-027 | 0 | |||
| 5804300 | SHEREX FASTENING SO | 0 | ||||
| 16CW008043 | Essentra Components | CUPPED WASHER, 8 SCREW, .172 I | 0 | |||
| 3BP-P8043-00 | Acumnet / Camcar | 8-16 X 5/8 PHIL PAN HD | 0 | |||
| 3BT-P8043-00 | Acumnet / Camcar | 8-32 X 1 TXP PAN HD MS | 0 | |||
| AE804-3716 | PennEngineering (PEM) | Totally pneumatic tool that installs Atlas SpinTite� and pre-bulbed PlusTite� fasteners into various material thickness.Also available Series 806 tool with adjustable clutch to install 4-40 to 1/4-20 thread sizes.NOTE The air supplied to the 800 and 900 s | 0 | |||
| 8043-440-SS-26 | RAF Electronic Hardware | 0 | ||||
| 498043 | Essentra Components | PVC GROMMET, BLACK, 12 MM HOLE | 0 | |||
| AE804-3/8-24 | PennEngineering (PEM) | 0 | ||||
| 8804-3724-SS | RAF Electronic Hardware | 0 | ||||
| 804-3/8-24 | PennEngineering (PEM) | 0 | ||||
| 804-3/8-16 | PennEngineering (PEM) | 0 | ||||
![]() EBV Elektronik | APT8043BLLG | Microchip Technology Inc | (Alt: APT8043BLLG) RoHS : Compliant | 0 | ||
| EMI8043MUTAG | onsemi | Common Mode Filter with ESD Protection750MHz CM Stop Band Attenuation for HDMI Interfaces Three Pair EMI Filter Consumer Qualified ONSSPCPRTCNIW2U6D (Alt: EMI8043MUTAG) RoHS : Compliant | 0 | |||
| APT8043BFLLG | Microchip Technology Inc | (Alt: APT8043BFLLG) RoHS : Compliant | 0 | |||
| SGM3804-3YG/TR | SG Micro Corp | Single Inductor PositiveNegative Dual Output BuckBoost Converter (Alt: SGM3804-3YG/TR) RoHS : Compliant | 0 | |||
![]() Pasternack Enterprises US | PE3C7804-3 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 3 inches. SMP Female to Straight Cut Lead Cable 3 Inch Length Using PE-047SR Coax., Radio frequency assembly SMP female to straight cut lead cable 3 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to straight cut lead cable 3 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP cable connection on one end and a straight cut lead cable connection on the other. Our SMP to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C7804-3 can also be known as a SMP jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. SMP jack to straight cut lead sexless cable assembly PE3C7804-3 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7804-3 can also be used in the other direction and will be a straight cut lead sexless to SMP female cable assembly if the opposite connectivity is required. SMP jack to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to straight cut lead cable assembly for quick shipment worldwide. Variations of SMP and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to Straight Cut Lead RF cable assembly as per your requirements. |
| 537 | |
| PE3C9804-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 36 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 36 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 36 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C9804-36 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C9804-36 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle low loss cable 36 inch length using TCOM-240 coax with Times Microwave components. |
| 7 | ||
| PE3C8043 | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58-TPX, RF Cable Type: RG58-TPX, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W08043 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to N Male Cable Using LMR-195 Coax. PE3W08043 is a 7/16 DIN male to N male cable using LMR-195 coax. This Pasternack 7/16 DIN male to N male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm N for connector 2. Our male 7/16 DIN to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08043 7/16 DIN male to N male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE38043/TN | Pasternack Enterprises | 0 | ||||
| PE38043/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MCX Plug to BNC Female Bulkhead Cable Using RG316 Coax with HeatShrink., Radio frequency assembly MCX plug to BNC female bulkhead cable using RG316 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug to BNC female bulkhead cable using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and BNC bulkhead cable connection on the other. Our MCX to BNC cable assemblies have a plug gender on end 1 and female on end 2. This MCX to BNC cable is a plug to female coax assembly, PE38043/HS, can also be known as a MCX male to BNC jack cable assembly and will be shipped same-day as it is purchased. MCX male to BNC jack cable assembly PE38043/HS is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX plug to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38043/HS can also be used in the other direction and will be BNC female bulkhead to MCX plug cable assembly if the opposite connectivity is required. MCX male to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to BNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to BNC female bulkhead cable using RG316 coax with heatshrink. | 0 | |||
| PE39804-3600 | Pasternack Enterprises |
| 0 | |||
| PE38043LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to MCX Plug Cable Using RG316 Coax, LF Solder. PE38043LF is a BNC female bulkhead to MCX plug cable using RG316 coax. This Pasternack BNC female bulkhead to MCX plug cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm MCX for connector 2. Our female BNC bulkhead to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE38043LF BNC female bulkhead to MCX plug cable assembly is constructed with RG316 coax. | 0 | |||
| PE38043 | Pasternack Enterprises | 0 | ||||
| PE48043 | Pasternack Enterprises |
| 0 | |||
| PE3C8043LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58-TPX, RF Cable Type: RG58-TPX, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE37804-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SHV Plug to Straight Cut Lead Cable 36 Inch Length Using RG58 Coax., Radio frequency assembly SHV plug to straight cut lead cable 36 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV plug to straight cut lead cable 36 inch length using RG58 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and straight cut lead cable connection on the other. Our SHV to straight cut lead cable assemblies have a plug gender on end 1 and sexless on end 2. PE37804-36 can also be known as a SHV male to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SHV male to straight cut lead sexless cable assembly PE37804-36 is built with RG58 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV plug to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37804-36 can also be used in the other direction and will be straight cut lead sexless to SHV plug cable assembly if the opposite connectivity is required. SHV male to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to straight cut lead cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV plug to straight cut lead cable 36 inch length using RG58 coax. |
| 0 | ||
| PE33804-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female to N Male Cable 36 Inch Length Using RG223 Coax., Radio frequency assembly SMA female to N male cable 36 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to N male cable 36 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our SMA to type N cable assembly has a female gender on end 1 and a male on end 2. PE33804-36 can also be known as a SMA jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE33804-36 RF cable has a PVC jacket of 0.210-inch diameter. The flexible RF cable has a between series connection. SMA jack to type N plug cable assembly PE33804-36 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33804-36 can also be used in the other direction and will be a type N male to SMA female cable assembly if the opposite connectivity is required. SMA jack to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE38804-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length: 36 inches. BNC Male to BNC Female Bulkhead Cable 36 Inch Length Using PE-C195 Coax., Radio frequency assembly BNC male to BNC female bulkhead cable 36 inch length using PE-C195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC female bulkhead cable 36 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC bulkhead cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE38804-36, can also be known as a low loss BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE38804-36 is built with PE-C195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38804-36 can also be used in the other direction and will be BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC female bulkhead cable 36 inch length using PE-C195 coax. |
| 0 | ||
![]() Teledyne HiRel | 82008043A | Teledyne HiRel | PROM, 4K X 8, WITH 3-STATE OUTPUTS, 70 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
| 5962-90658043C | Teledyne HiRel | PROM, UV ERASABLE, 4K X 8, 35 NS ACCESS TIME | 0 | |||
| 5962-88518043A | Teledyne HiRel | PROM, 512 X 8, REGISTERED, 30 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-90658043A | Teledyne HiRel | PROM, UV ERASABLE, 4K X 8, 35 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
![]() Vyrian | DAC8043FSZ![]() | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 0.25us Settling Time, PDSO16 RoHS : Compliant | 12,079 | ||
DAC8043AFRU![]() | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 1us Settling Time, PDSO8 RoHS : Not Compliant | 11,508 | |||
| LTC8043ES8-PBF | Analog Devices Inc | 11,363 | ||||
DAC8043A1ES![]() | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, PDSO8 RoHS : Not Compliant | 11,335 | |||
DAC8043FZ![]() | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 0.25us Settling Time, CDIP8 RoHS : Not Compliant | 10,764 | |||
| LTC8043FN8#PBF | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 0.25us Settling Time, PDIP8 RoHS : Compliant | 10,080 | |||
DAC8043AFS-REEL7![]() | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 1us Settling Time, PDSO8 RoHS : Not Compliant | 9,671 | |||
| 2858043 | Phoenix Contact | Surge Arrestors RoHS : Compliant | 9,435 | |||
| 5-1814804-3 | TE Connectivity | RF TNC Connector, 1 Contact(s), Female, Panel Mount, Solder Terminal, Locking, Jack RoHS : Compliant | 8,687 | |||
| DAC8043BIFP | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 0.25us Settling Time, PDIP8 RoHS : Not Compliant | 8,494 | |||
DAC8043AFRUZ![]() | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 1us Settling Time, PDSO8 RoHS : Compliant | 8,410 | |||
DAC8043FP![]() | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 0.25us Settling Time, PDIP8 RoHS : Not Compliant | 8,102 | |||
DAC8043U/2K5G4![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 0.25us Settling Time, PDSO8 RoHS : Compliant | 7,033 | |||
| LTC8043FS8 | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 0.25us Settling Time, PDSO8 RoHS : Not Compliant | 5,842 | |||
AX7PAF1-804.3100T![]() | Abracon Corporation | LVPECL Output Clock Oscillator, 804.31MHz Nom RoHS : Compliant | 217 | |||
![]() Win Source Electronics | SRU8043-100Y | Bourns Inc | FIXED IND 10UH 3.5A 30 MOHM SMD RoHS : Compliant |
| 8,000 | |
| B39272B8043P810 | Qualcomm | Saw Filter For Lte Femtocell |
| 4,421 | ||
TUSB8043AIRGCR![]() | Texas Instruments | IC INTERFACE MISC / USB Hub Controller USB 1.1, USB 2.0, USB 3.1 USB, GPIO, I²C, SMBus Interface 64-VQFN (9x9) RoHS : Compliant |
| 3,580 | ||
DAC8043UC![]() | Texas Instruments | IC 12-BIT D/A CONVERTER 8-SOIC RoHS : Compliant |
| 2,600 | ||
| PM8043B-F3EI | Microchip Technology Inc | Afm-700 Supercap Kit, 896 Fbga 25X25X2.26Mm Tray Rohs Compliant: Yes RoHS : Compliant |
| 2,480 | ||
LTC8043ES8![]() | Linear Technology | Serial 12-Bit Multiplying DAC in SO-8 RoHS : Not Compliant |
| 1,047 | ||
LTC8043ES8#TRPBF![]() | Linear Technology | IC D/A CONV 12BIT SERIAL 8-SOIC RoHS : Compliant |
| 990 | ||
LTC8043ES8#PBF![]() | Linear Technology | IC D/A CONV 12BIT SERIAL 8-SOIC RoHS : Compliant |
| 980 |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |