8047F0HKP Price, 販売店, Stock

These robust modules satisfy requirements of the AdvancedTCA� Base Specification for telecom applications including the drop test without additional support components. And multiple keying configurations provide any plug-in circuit board application wit

8047-440-A

RAF Electronic Hardware

8047-440-A-34

RAF Electronic Hardware

A5-0-80478

Southco

20568047

Essentra Components

103MM HOLE STRAIGHT WALL PLUGL

498047

Essentra Components

07498-04700

Avdel

316 MONOBOLT NOSE ASY 316 M

EBV Elektronik

IFX80471SKVXUMA1

Infineon Technologies AG

DC DC Cntrlr SingleOUT Step Down 5V to 60V 14Pin DSO TR (Alt: SP000858402)
RoHS : Compliant

CS18047_HB-IP-24-M

LEDIL

LED Lighting Multi Lens 30 Wide Beam PMMA 173mm x 714mm x 10mm Box (Alt: CS18047_HB-IP-24-M)
RoHS : Compliant

FH8069004638047S RKWY

Intel Corporation

MPU CISC 64Bit 45GHz 1787Pin FCBGA Tray (Alt: 99AH7M)
RoHS : Compliant

FDH Electronics

118-04700

HellermannTyton

Cable Rt & Sec
RoHS : Compliant

1 : $0.084
5 : $0.084
10 : $0.084
25 : $0.084
50 : $0.084
100 : $0.084
250 : $0.084
500 : $0.074
1,000 : $0.071
2,500 : $0.071
10,000 : $0.058

1,850

8-1580-47-1M

Cinch Connectivity Solutions

Hardware

6380471

MSC INDUSTRIAL SUPPLY CO.

Machine Tooling

13080476-2

Amphenol Positronic

Circular Conn

1 : $138.309
5 : $128.932
10 : $115.258
25 : $113.537
50 : $113.537
100 : $111.868
250 : $108.671
500 : $105.653
1,000 : $104.205
2,500 : $104.205
10,000 : $104.205

HAR SAN1780476

FDH Electronics

Wire Placehldr

M28804/7-3N

Aptiv PLC

Connector Acc

12TW804-72

Honeywell Sensing and Control

Switches
RoHS : Compliant

2455R--90980472

Honeywell Sensing and Control

Thermistor

1 : $123.12
5 : $123.12
10 : $102.6
25 : $82.869
50 : $82.869
100 : $75.6
250 : $69.503
500 : $69.503
1,000 : $69.503
2,500 : $69.503
10,000 : $69.503

M28804/7-4N

Aptiv PLC

Rectangular Con

1 : $772.04
5 : $719.698
10 : $643.367
25 : $633.764
50 : $633.764
100 : $624.444
250 : $606.603
500 : $589.753
1,000 : $581.674
2,500 : $581.674
10,000 : $581.674

M28804/7-3W

Aptiv PLC

Connector Acc

1 : $998.262
5 : $998.262
10 : $880.82
25 : $831.885
50 : $831.885
100 : $802.175
250 : $774.514
500 : $774.514
1,000 : $748.697
2,500 : $748.697
10,000 : $724.545

12TW804-72E

Honeywell Sensing and Control

Switches
RoHS : Compliant

M28804/7-3X

Aptiv PLC

Connector Acc

1 : $998.262
5 : $998.262
10 : $880.82
25 : $831.885
50 : $831.885
100 : $802.175
250 : $774.514
500 : $774.514
1,000 : $748.697
2,500 : $748.697
10,000 : $724.545

M8805/98-047

Honeywell Sensing and Control

Switches

84158-04.7HG-05

Honeywell Sensing and Control

Switches

1 : $178.213
5 : $178.213
10 : $154.223
25 : $131.469
50 : $131.469
100 : $127.295
250 : $123.378
500 : $119.696
1,000 : $116.226
2,500 : $114.566
10,000 : $114.566

M28804/7-3Z

Aptiv PLC

Connector Acc

1 : $998.262
5 : $998.262
10 : $880.82
25 : $831.885
50 : $831.885
100 : $802.175
250 : $774.514
500 : $774.514
1,000 : $748.697
2,500 : $748.697
10,000 : $724.545

Maritex

5055780471

Molex

Male Pin Headers; 5055780471; MOLEX; 1; 4
RoHS : Compliant

1,000 : $0.295
500 : $0.321
100 : $0.387
30 : $0.469
10 : $0.553
1 : $0.7337

900

690367280476

Wurth Elektronik

Low profile PCB connector; pitch 1.27mm; 4-contacts; SMD; female; top entry
RoHS : Compliant

500 : $0.78
200 : $0.843
100 : $0.871
1 : $0.9172

836

513380474

Molex

Board Stacking Connectors; 513380474; MOLEX; Tape & Reel; 40; 2; Surface Mount
RoHS : Compliant

1,000 : $0.331
500 : $0.357
100 : $0.431
30 : $0.52
10 : $0.617
1 : $0.8178

240

533980471

Molex

Board Stacking Connectors; 533980471; MOLEX; Cut Tape; 4; 1; Surface Mount

2,800 : $0.094
1,400 : $0.1
100 : $0.115
30 : $0.127
10 : $0.171
1 : $0.2283

368047-1

TE Connectivity

Automotive Connectors; 368047-1; TE CONNECTIVITY; Black; 16; No; 30.48 mm
RoHS : Compliant

500 : $0.935
100 : $1.045
50 : $1.136
10 : $1.345
1 : $1.5465

968-047

Spec Sensors

Analog nitrogen dioxide sensor; range: 20ppm; supply: 3V; power: 30uW; output: voltage

1 : $94.265

Pasternack Enterprises US

PE3C8047

Pasternack Enterprises

Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. HN Male to HN Male Low Loss Cable Using PE-P195 Coax., Radio frequency assembly HN male to HN male low loss cable using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The HN male to HN male low loss cable using PE-P195 coax, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our low loss HN to HN cable assemblies have a male gender on end 1 and male on end 2. PE3C8047 can also be known as a low loss HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3C8047 is built with PE-P195 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male low loss cable using PE-P195 coax.

395

PE3C8047-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. HN Male to HN Male Low Loss Cable 24 Inch Length Using PE-P195 Coax., Radio frequency assembly HN male to HN male low loss cable 24 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The HN male to HN male low loss cable 24 inch length using PE-P195 coax, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our low loss HN to HN cable assemblies have a male gender on end 1 and male on end 2. PE3C8047-24 can also be known as a low loss HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3C8047-24 is built with PE-P195 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male low loss cable 24 inch length using PE-P195 coax.

1 : $199.99
25 : $189.99
50 : $179.99
100 : $171.99

PE3C8047-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. HN Male to HN Male Low Loss Cable 60 Inch Length Using PE-P195 Coax., Radio frequency assembly HN male to HN male low loss cable 60 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The HN male to HN male low loss cable 60 inch length using PE-P195 coax, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our low loss HN to HN cable assemblies have a male gender on end 1 and male on end 2. PE3C8047-60 can also be known as a low loss HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3C8047-60 is built with PE-P195 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male low loss cable 60 inch length using PE-P195 coax.

1 : $256.99
25 : $244.14
50 : $231.29
100 : $221.01

PE3C8047-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. HN Male to HN Male Low Loss Cable 36 Inch Length Using PE-P195 Coax., Radio frequency assembly HN male to HN male low loss cable 36 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The HN male to HN male low loss cable 36 inch length using PE-P195 coax, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our low loss HN to HN cable assemblies have a male gender on end 1 and male on end 2. PE3C8047-36 can also be known as a low loss HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3C8047-36 is built with PE-P195 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male low loss cable 36 inch length using PE-P195 coax.

1 : $218.99
25 : $208.04
50 : $197.09
100 : $188.33

PE3C8047-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. HN Male to HN Male Low Loss Cable 12 Inch Length Using PE-P195 Coax., Radio frequency assembly HN male to HN male low loss cable 12 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The HN male to HN male low loss cable 12 inch length using PE-P195 coax, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our low loss HN to HN cable assemblies have a male gender on end 1 and male on end 2. PE3C8047-12 can also be known as a low loss HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3C8047-12 is built with PE-P195 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male low loss cable 12 inch length using PE-P195 coax.

1 : $175.99
25 : $167.19
50 : $158.39
100 : $151.35

PE3C8047-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. HN Male to HN Male Low Loss Cable 72 Inch Length Using PE-P195 Coax., Radio frequency assembly HN male to HN male low loss cable 72 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The HN male to HN male low loss cable 72 inch length using PE-P195 coax, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our low loss HN to HN cable assemblies have a male gender on end 1 and male on end 2. PE3C8047-72 can also be known as a low loss HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3C8047-72 is built with PE-P195 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male low loss cable 72 inch length using PE-P195 coax.

1 : $278.99
25 : $265.04
50 : $251.09
100 : $239.93

PE33804-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMA Female to N Male Cable 72 Inch Length Using RG223 Coax., Radio frequency assembly SMA female to N male cable 72 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to N male cable 72 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our SMA to type N cable assembly has a female gender on end 1 and a male on end 2. PE33804-72 can also be known as a SMA jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE33804-72 RF cable has a PVC jacket of 0.210-inch diameter. The flexible RF cable has a between series connection. SMA jack to type N plug cable assembly PE33804-72 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33804-72 can also be used in the other direction and will be a type N male to SMA female cable assembly if the opposite connectivity is required. SMA jack to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements.

1 : $109.99
10 : $107.79
25 : $105.59
100 : $103.39

PE3W08047

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. 3.5mm Female to 3.5mm Female Bulkhead Cable Using PE-SR402AL Coax. PE3W08047 is a 3.5mm female to 3.5mm female bulkhead cable using PE-SR402AL coax. This Pasternack 3.5mm female to 3.5mm female bulkhead cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our female 3.5mm to female 3.5mm bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08047 3.5mm female to 3.5mm female bulkhead cable assembly is constructed with PE-SR402AL coax.